Database Info

No CWM for WT19i???

Hi...
I have been searching the net for about a week now and couldn't find CWM recovery for my SE Live WT19i. Maybe i am looking in the wrong places. phone runs on 2.3.4 with 4.0.2.A.0.62 (rooted). Also please name any good Roms for the phone...
Please help.
Thanks...

c4capricorn said:
Hi...
I have been searching the net for about a week now and couldn't find CWM recovery for my SE Live WT19i. Maybe i am looking in the wrong places. phone runs on 2.3.4 with 4.0.2.A.0.62 (rooted). Also please name any good Roms for the phone...
Please help.
Thanks...
Click to expand...
Click to collapse
take a look
link1
link2
link3
link4
you need an unlocked bootloader instructions above
use a laptop on battery when flashing to protect from bootloader errors
if something wrong when flashing bootloader your phone is bricked
you have to use service tools to solve this problem
(screen is black phone looks like dead)

install this:
https://play.google.com/store/apps/details?id=com.pvy.CWMinstaler&hl=en

rajmi said:
install this:
https://play.google.com/store/apps/details?id=com.pvy.CWMinstaler&hl=en
Click to expand...
Click to collapse
I installed it but says the phone is not supported...

get SE_Extreme_Tweak_Installer_1.8.... It works
---------- Post added at 04:20 PM ---------- Previous post was at 04:15 PM ----------
get SE_Extreme_Tweak_Installer_1.8.... It works
to enter into recovery mod, turn off ur phone and press volume down key multiple times while turning on

[HOW TO ROOT]Tinji I9300

Hi, i have buy an android smartphone, the tinji i9300. Have MTK6577, 512 RAM and android 4.1.1.
But i want root this for make many task
So how can make this root please ?
thanks

flavien317 said:
Hi, i have buy an android smartphone, the tinji i9300. Have MTK6577, 512 RAM and android 4.1.1.
But i want root this for make many task
So how can make this root please ?
thanks
Click to expand...
Click to collapse
I have the same phone and i also need to root the phone, any help?

elessartk said:
I have the same phone and i also need to root the phone, any help?
Click to expand...
Click to collapse
Send me a PM please i have questions

This Tinji I9300 looks similar to the Star GT-i9300 MT6577 from cect-shop.com. I bought the CECT version and rootet it with a modified boot.img.
I attached a screenshot of my system-info. If you think we have the same phones i can upload my boot.img.
http://forum.xda-developers.com/attachment.php?attachmentid=1276083&stc=1&d=13456611160

hardi75 said:
This Tinji I9300 looks similar to the Star GT-i9300 MT6577 from cect-shop.com. I bought the CECT version and rootet it with a modified boot.img.
I attached a screenshot of my system-info. If you think we have the same phones i can upload my boot.img.
http://forum.xda-developers.com/attachment.php?attachmentid=1276083&stc=1&d=13456611160
Click to expand...
Click to collapse
yes it is all same like this. have root the phone ? have good rom for this, becasue just 512ram is verry little ?
thanks

hardi75 said:
This Tinji I9300 looks similar to the Star GT-i9300 MT6577 from cect-shop.com. I bought the CECT version and rootet it with a modified boot.img.
I attached a screenshot of my system-info. If you think we have the same phones i can upload my boot.img.
http://forum.xda-developers.com/attachment.php?attachmentid=1276083&stc=1&d=13456611160
Click to expand...
Click to collapse
Can you also send me the file?

Hi,
i used a modified boot.img to root the phone.
I did it on my own for the phone i've bought at cect-shop.com (see above) so i'm not sure that it will work on other i9300s too.
I recommend to save your own boot.img first using the readback function from the flashtool with startadress:0x0000000000f88000 and lenght 0x00600000.
You are using this file on your own risk, good luck !

hardi75 said:
Hi,
i used a modified boot.img to root the phone.
I did it on my own for the phone i've bought at cect-shop.com (see above) so i'm not sure that it will work on other i9300s too.
I recommend to save your own boot.img first using the readback function from the flashtool with startadress:0x0000000000f88000 and lenght 0x00600000.
You are using this file on your own risk, good luck !
Click to expand...
Click to collapse
thanks but have you guide for save boot im and root ?

flavien317 said:
thanks but have you guide for save boot im and root ?
Click to expand...
Click to collapse
Take a look into ColonelZaps blog : http://colonelzap.blogspot.de/2012/07/star-note-ii-n9770-mt6577-dual-core.html
It's the same way, just use the i9300 boot.img instead of the one from the blog.
How to read your boot.img per readback should be clear if you play around a bit with the flashtool.

re
i make all of step but, i change the n9770root.zip by the boot of your boot.img ? how can i save my boot img of the no root phone ?
thanks

flavien317 said:
i make all of step but, i change the n9770root.zip by the boot of your boot.img ? how can i save my boot img of the no root phone ?
thanks
Click to expand...
Click to collapse
n9770root.zip includes all what you need, drivers (maybe the most difficult part), flashtool and a boot.img. This boot.img must be swapped with my file. You can do this by doubleclicking the boot.img in the flashttool after loading the scatterfile. Try it out, you can't harm anything as long as the phone is not connected.
When you opend the flastool you will find a button labeled with 'readback'. Click it, than press 'add' and enter the adresse and length. if you finished that press readback and the tool will read your boot.img to your harddisc.

hardi75 said:
n9770root.zip includes all what you need, drivers (maybe the most difficult part), flashtool and a boot.img. This boot.img must be swapped with my file. You can do this by doubleclicking the boot.img in the flashttool after loading the scatterfile. Try it out, you can't harm anything as long as the phone is not connected.
When you opend the flastool you will find a button labeled with 'readback'. Click it, than press 'add' and enter the adresse and length. if you finished that press readback and the tool will read your boot.img to your harddisc.
Click to expand...
Click to collapse
i can't arrieved to download, i clik on yes and after the download don't begining.
and for save my boot.img, i don't understand, i can't connect my phone ? i make just the adress and leght you have post ? and sure it is the same like my phone ?

flavien317 said:
i can't arrieved to download, i clik on yes and after the download don't begining.
and for save my boot.img, i don't understand, i can't connect my phone ? i make just the adress and leght you have post ? and sure it is the same like my phone ?
Click to expand...
Click to collapse
You have to load the scatterfile, change the boot.img,then first press 'download' before you connect your phone which have to be off.
The download should start automaticly, if not or if an error-window appears the driver is not installed correctly.
I wasn't able to install the driver on 2 Windows 7 PCs. I reactivated my old Windows XP PC and was succesfull. It seems to be a bit difficult to install the driver.
The adresse and length should be the same on every MTK6577 phone, you had to connect your phone as the last step. Doesn't matter if you want to download or readback.
I know no other way to root a MTK6577 phone than flashing a rootet boot.img, it was easier on MTK6575 phones.

if i understand, i open flashtool, i make all like you say (boot img, scartet fil...), i click on download, i click on yes and i connect my phone (with or without batterie) ?
and i don't understand for save my boot ?
thx, and sorry, im noob in android

Phone white screen
Help, my phone show white screen after flash the boot.img... How to revert that...
---------- Post added at 01:57 AM ---------- Previous post was at 01:47 AM ----------
inamie said:
Help, my phone show white screen after flash the boot.img... How to revert that...
Click to expand...
Click to collapse
Ohh.. figure out copy the wrong file.. Now everything works fine..TQ

inamie said:
Help, my phone show white screen after flash the boot.img... How to revert that...
---------- Post added at 01:57 AM ---------- Previous post was at 01:47 AM ----------
Ohh.. figure out copy the wrong file.. Now everything works fine..TQ
Click to expand...
Click to collapse
Your phone is rootet ? What phone do you have ? Tinji i9300 ?
I just would like to know for which phones the modified boot.img can be used.
---------- Post added at 08:20 PM ---------- Previous post was at 08:11 PM ----------
flavien317 said:
if i understand, i open flashtool, i make all like you say (boot img, scartet fil...), i click on download, i click on yes and i connect my phone (with or without batterie) ?
and i don't understand for save my boot ?
thx, and sorry, im noob in android
Click to expand...
Click to collapse
Yes, connecting the phone should be the last step. Take the battery out for a second to reset the phone and put it back before connecting it.
As you say you are an android noob i would urgently recommend to make a backup first.
Start the flash-tool -> load the scatter-file -> click on 'Read back' -> click on 'Add' -> doubleclick the new entry -> give a name for your backup -> enter start-adress and length -> click ok -> click on readback button -> connect your phone.
If the driver is correctly installed the tool starts automaticly. The result should be a file with a bit more than 6MB.

thx very much, i have root the phone. But have you rom for this ?
thanks

flavien317 said:
thx very much, i have root the phone.
Click to expand...
Click to collapse
:highfive:
flavien317 said:
But have you rom for this ?
Click to expand...
Click to collapse
No, found no rom yet. Here is someone saying that he have a rom for the i9300 but i got no response so far.

hardi75 said:
:highfive:
No, found no rom yet. Here is someone saying that he have a rom for the i9300 but i got no response so far.
Click to expand...
Click to collapse
ok, rom is speciality for tinji/star i9300 ?

I don't know, just found this per google.
can anybody please make a readback from the recovery-file (0x0000000001588000 / 0x00600000) ?
I damaged mine while playing around, even though i'm not sure that the phone had a working recovery before.

[Q] AT&T S5 (G900A) Soft-Bricked / Freezes on Boot Logo using any ROM

I'd appreciate any help to get my phone working again. I've only had it for a couple of weeks and I'm hoping I haven't completely ruined it...
I'll try to recall the exact steps I took to get to this point:
First, towelroot wouldn't work to get root due to me accepting the OTA update to 4.4.4 android. So I found on a forum post that you can use Odin to flash the stock kernel and then towelroot will work. So I downloaded the stock kernel and flashed it successfully using Odin. Towelroot was then able to work with success. After that I installed SuperSU and busybox. Then I was using this guide (URL omitted due to forum rules) to install SafeStrap recovery as I'd read CWM recovery didn't work for the G900A model (AT&T). Safestrap seemed to install OK and when I rebooted I was able to get into the SafeStrap software interface. From there, I attempted to flash the CM12 nightly build to the "stock rom" slot (I'd read there was some trouble using the non-stock-rom slots in SafeStrap). That operation completed with success, but when I tried to reboot, it froze at the CM12 splash screen. I tried this with a few more custom ROMS and they all do the same thing (freeze up on boot logo / splash screen).
I've tried using Odin to flash back the stock firmware. As long as I didn't try to flash the bootloader (BL) Odin shows "PASS". However, when it reboots it again hangs on the Samsung splash screen.
So at this point, I've flashed all stock firmware to the phone (except BL) and it freezes and then goes black screen on the Samsung splash screen. Also, it no longer shows the SafeStrap "recovery / continue" bootup screen since I flashed the stock firmware.
Any ideas on how I can get back to a useable device?...

fix
use odin to fix this error will fix your phone
http://odindownload.com/
then follow these directions
Warning! Please find the right Tutorial before you starting the flashing
Do not forget to Backup your phone.
Download the correct and latest Odin versions
Install the Latest Samsung USB Driver
Download and confirm Custom ROM with your device.
Keep in mind that , Most of Samsung phones are different and each one requires various procedures to rooting & flashing with custom ROMs
---------- Post added at 01:01 PM ---------- Previous post was at 01:00 PM ----------
I will get the link for the att s5 original rom
---------- Post added at 01:12 PM ---------- Previous post was at 01:01 PM ----------
http://galaxys5root.com/galaxy-s5-stock-firmware/

Deltax82 said:
use odin to fix this error will fix your phone
http://odindownload.com/
then follow these directions
Warning! Please find the right Tutorial before you starting the flashing
Do not forget to Backup your phone.
Download the correct and latest Odin versions
Install the Latest Samsung USB Driver
Download and confirm Custom ROM with your device.
Keep in mind that , Most of Samsung phones are different and each one requires various procedures to rooting & flashing with custom ROMs
---------- Post added at 01:01 PM ---------- Previous post was at 01:00 PM ----------
I will get the link for the att s5 original rom
---------- Post added at 01:12 PM ---------- Previous post was at 01:01 PM ----------
http://galaxys5root.com/galaxy-s5-stock-firmware/
Click to expand...
Click to collapse
@thebeav , @ up
"odindownload.com" will install a LOT of MALWARE (270MB) but NOT ODIN!!!!!!!!!!
Download ODIN (1MB) HERE
Original stock firmware (safe and tested) can be downloaded HERE
Connect your phone in "DOWNLOAD" mode (Power off and then press "Vol down + home + power" at the same time)
Open "ODIN" and select the downloaded firmware as "AP"
Press start (Progress will take about 10 minutes)
Phone will be fine again

LS.xD said:
"odindownload.com" will install a LOT of MALWARE (270MB) but NOT ODIN!!!!!!!!!!
Download ODIN (1MB) HERE
Original stock firmware (safe and tested) can be downloaded HERE
Click to expand...
Click to collapse
I downloaded from odin.com that and fixed my brothers note 4 and all three of my virus and malware detecters didn't go off

Deltax82 said:
I downloaded from that and fixed my brothers note 4 and all three of my virus and malware detecters didn't go off
Click to expand...
Click to collapse
Go for some working AV.
Avast internet security rings alarm.
And the installer itself looks quite suspicious lol

LS.xD said:
@thebeav , @ up
"odindownload.com" will install a LOT of MALWARE (270MB) but NOT ODIN!!!!!!!!!!
Download ODIN (1MB) HERE
Original stock firmware (safe and tested) can be downloaded HERE
Connect your phone in "DOWNLOAD" mode (Power off and then press "Vol down + home + power" at the same time)
Open "ODIN" and select the downloaded firmware as "AP"
Press start (Progress will take about 10 minutes)
Phone will be fine again
Click to expand...
Click to collapse
link checker said your link was harmful virus maybe attached do not use this link
---------- Post added at 01:28 PM ---------- Previous post was at 01:27 PM ----------
LS.xD said:
Go for some working AV.
Avast internet security rings alarm.
And the installer itself looks quite suspicious lol
Click to expand...
Click to collapse
that's the original odin installer website posted here on XDA by the main people that made this site do your research please

Deltax82 said:
link checker said your link was harmful virus maybe attached do not use this link
---------- Post added at 01:28 PM ---------- Previous post was at 01:27 PM ----------
that's the original odin installer website posted here on XDA by the main people that made this site do your research please
Click to expand...
Click to collapse
PLease get me link to the post you're talking about.

odin
Hi
Well there are many places to get it. I often go here:
http://androidcentral.us/2013/11/download-odin/
Regards
Administration
xda-developers.com

Deltax82 said:
Hi
Well there are many places to get it. I often go here:
http://androidcentral.us/2013/11/download-odin/
Regards
Administration
xda-developers.com
Click to expand...
Click to collapse
Pretty good, but its a completely different website as you posted before. Its not related to "http://odindownload.com" in any kind.
BTW, you're funny, sending me a PM and i can't answer you as you disabled receiving PMs. OMG

LS.xD said:
Pretty good, but its a completely different website as you posted before. Its not related to "http://odindownload.com" in any kind.
BTW, you're funny, sending me a PM and i can't answer you as you disabled receiving PMs. OMG
Click to expand...
Click to collapse
its the same program dude go to both and you will see wow im done with this conversation

Deltax82 said:
its the same program dude go to both and you will see wow im done with this conversation
Click to expand...
Click to collapse
Don't be mad. Its all about learning and you have great potential doing so...

When I tryto flash the PDA file I downloaded from @lsxD 's link with Odin I get the error "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"

thebeav said:
When I tryto flash the PDA file I downloaded from @lsxD 's link with Odin I get the error "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"
Click to expand...
Click to collapse
Googled the error. Solution is to flash the firmware with PIT file. Only problem is that someone has to give you a working pit file.
MATCHING THREAD
Same problem with other Samsung phone and description for the solution --> CLICK ME

I'm still stuck... I'm just looking to get back to a usable device. I really don't care if it's a stock or custom rom at this point. Any help is appreciated.

I tried flashing with the full firmware package I downloaded (4.4.2 G900A stock firmware) which included a *.pit file inside one of the tarballs. I used the PIT/re-partition option and everything succeeded except it still freezes at the Samsung boot logo.

Anyone? I'm getting desperate here...

thebeav said:
Anyone? I'm getting desperate here...
Click to expand...
Click to collapse
Looking not taht good. I tried my best with no success May be at this point or in some days in case no one here is able to help you, you could think about checking ebay for "bootloader repair" should be about 40$

Make G360H Superfast! Lagness SOLVED & Performance IMPROVED!

Hi,
We all felt problem of LAGGNESS and PERFORMANCE from our beast after flashing the custom ROMs. No way problems could not be solved although flashing official stock ROM through odin.
HERE HOW TO SOLVE THE PROBLEMS.
First of all you have to download Smart Switch( Official PC suite)
and then simple flash ROM through the suite. DONE af
Just download SMART SWITCH from http://www.samsung.com/in/support/smartswitch/ to your pc.
BOOT your phone to DOWNLOAD mode [power+volume down+home key while phone in switched off mode]
Go to smart switch and press EMERGENCY SOFTWARE RECOVERY AND ... & follow the instruction.
Done!!!!!
HOPE UR PROBLEM WILL BE SOLVED LIKE ME
------------------------------------------------------
I have not yet install any CUSTOM ROM. So don"t know about performance in Custom ROM. If u have tried pls report asap.
I recommend INSTALL RR 6.0 (Only big problem is networkstabilty, others are okay).
Video guide :

itsmedRb said:
hey
Just download SMART SWITCH from http://www.samsung.com/in/support/smartswitch/ to your pc.
BOOT your phone to DOWNLOAD mode.
Go to smart switch and press EMERGENCY SOFTWARE RECOVERY AND ... & follow the instruction.
Done!!!!!
HOPE UR PROBLEM WILL BE SOLVED LIKE ME
Click to expand...
Click to collapse
btw then I can flash roms like usual? and it wont bring back the same problem?

Hammad1029 said:
btw then I can flash roms like usual? and it wont bring back the same problem?
Click to expand...
Click to collapse
I have not checked. pls report if u find

itsmedRb said:
I have not checked. pls report if u find
Click to expand...
Click to collapse
when I open smart switch, it say's that the device isn't supported
---------- Post added at 02:27 PM ---------- Previous post was at 01:38 PM ----------
itsmedRb said:
I have not checked. pls report if u find
Click to expand...
Click to collapse
says unsupported only when i'm in the download mode and not when the os is booted

hammad1029 said:
when i open smart switch, it say's that the device isn't supported
---------- post added at 02:27 pm ---------- previous post was at 01:38 pm ----------
says unsupported only when i'm in the download mode and not when the os is booted
Click to expand...
Click to collapse
go to site menu bar and press device initial recovery and initialisation.

itsmedRb said:
go to site menu bar and press device initial recovery and initialisation.
Click to expand...
Click to collapse
on the emergency software recovery tab, it shows nothing. And the other device intialization tab, it says to enter the model number and the S/N number which I don't know what it is so what do I do?

Hammad1029 said:
on the emergency software recovery tab, it shows nothing. And the other device intialization tab, it says to enter the model number and the S/N number which I don't know what it is so what do I do?
Click to expand...
Click to collapse
MODEL NO SM-G360H
S/N NO- remove battery and see on the back panel

itsmedRb said:
MODEL NO SM-G360H
S/N NO- remove battery and see on the back panel
Click to expand...
Click to collapse
I did it and installed rr 6.0 and its smooth as ****(at least for now) and so you can add to the thread that roms work and the method works too

Can I use the tar.md5 file in this tool also?? Like Odin?

Doesn't work. If you have flashed ANY THING on your out-of-the-box firmware, it will give you lag whether you flash/format and reinstall STOCK rom. If you can feel the smoothness again, don't get too excited, the lag will come again within 15 days.
Once you flash there is no going back.

It just install the very first firmware of the phone. This won't make difference tho
---------- Post added at 04:04 AM ---------- Previous post was at 03:49 AM ----------
Since I can't post my feedback to hashtag new PAC ROM I wrote it here instead. So I just flash it in a clean way. From clearing system and all and back to stock install root kernel then twrp then flash the PAC ROM clean way. And after testing
And it takes I thing more than 30mins to flash the ROM. And after testing the ROM is extremely laggy and I found resurrection remix way smoother than the new PAC ROM
---------- Post added at 04:10 AM ---------- Previous post was at 04:04 AM ----------
@[email protected]
Anyway how to tag a user in a post or reply?
Sorry a new member here
---------- Post added at 04:29 AM ---------- Previous post was at 04:10 AM ----------
[email protected]

The lag is back! What do i do?!!!

Hammad1029 said:
The lag is back! What do i do?!!!
Click to expand...
Click to collapse
Wipe and flash, lol. Cp is ?

Bro it's crap
This only reflash the firmware. As soon as there are apps, the phone will get laggy. So don't be excited.

Placebo. There's no reason a why a wipe makes device lagfree except for the first few hours..

rms112 said:
Placebo. There's no reason a why a wipe makes device lagfree except for the first few hours..
Click to expand...
Click to collapse
True.

Will this work with Hashtags 7.1.2 rom?

Hammad1029 said:
on the emergency software recovery tab, it shows nothing. And the other device intialization tab, it says to enter the model number and the S/N number which I don't know what it is so what do I do?
Click to expand...
Click to collapse
Video guide added as well in Op. check

Video added in OP.
Please note phone will be faster as you new phone you have bought. (Later lag, that's blame SAMSUNG)

Hay.i have an idea. . . .i tryed it and it works for me, . .go try your self.but you will lost your data.so backup 1st.
1st step=>you nead stock rom,
2nd step=>go to stock recovery and do wipe and factry reset several time(3-5),
3rd and last step=>go to setings and do a factry reset from there,
After 3rd step you will feel the light of the rom like 1st day you buy it.!

all sensors not working after customer care flash rom

I have stock rom on my Oneplus 6. After the new OTA update 9.0.5 it downloads (aprrox 94 Mb) but installation failed. After 2 tries it says download full rom. then I rebooted my device, It stuck into fastboot mode. I called customer care they flashed the device remotely, now device is booted normally but all sensors are not working like proximity, autorotate etc. by dialing *#808# engineering menu tries to self-test & calibrate sensors but it shows only grey screen. Also sensor test & CPU-z app from play store also not showing any sensors.
dear members is it possible that flashing currupted my sensor files in system, could it possible to flash sensor file.
I tried to downgrade to 9.0.4 via update from local, says downgrade not possible. I tried Beta 16 update , problem still persist.
help me guys ASAP.

try to flash with msmdownloadtool, just search "op6 unbrick tool", if no success, try to flash via fastboot persist.img (pretty common issue with Xiaomi/OnePlus that comes to my repair shop) from working OP6. good luck.

https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3903272
---------- Post added at 08:13 PM ---------- Previous post was at 08:12 PM ----------
acmerw said:
try to flash with msmdownloadtool, just search "op6 unbrick tool", if no success, try to flash via fastboot persist.img from working OP6. good luck.
Click to expand...
Click to collapse
Hah. Great minds think alike Posted the same thing

please provide details/link for these procedures.
acmerw said:
try to flash with msmdownloadtool, just search "op6 unbrick tool", if no success, try to flash via fastboot persist.img (pretty common issue with Xiaomi/OnePlus that comes to my repair shop) from working OP6. good luck.
Click to expand...
Click to collapse
I am a noob, so I don't know how to do these procedures even if I download above mentioned file (msmsdownloadtool, persist.img) or my downloaded files are compatible with my oneplus 6. Could you give me links for further details.

Thanks
divvykev said:
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3903272
---------- Post added at 08:13 PM ---------- Previous post was at 08:12 PM ----------
Hah. Great minds think alike Posted the same thing
Click to expand...
Click to collapse
Thats what I wanted, a detailed post esp having video showing all steps. I will try this & inform you soon.
All you seniors thanks for help.

not suceeded
playxda said:
Thats what I wanted, a detailed post esp having video showing all steps. I will try this & inform you soon.
All you seniors thanks for help.
Click to expand...
Click to collapse
I download the software & do all the steps, now my oneplus 6 is booted to os 9.0.2 but the sensors still not working. Do i need flash_persist.img. if yes, where do I get it for my device & how to use it.

detials needed
playxda said:
I am a noob, so I don't know how to do these procedures even if I download above mentioned file (msmsdownloadtool, persist.img) or my downloaded files are compatible with my oneplus 6. Could you give me links for further details.
Click to expand...
Click to collapse
where do I get fastboot persist.img & how to use it. as this is the next procedure after msmsdownload tool did not solve the problem.

playxda said:
where do I get fastboot persist.img & how to use it. as this is the next procedure after msmsdownload tool did not solve the problem.
Click to expand...
Click to collapse
I think you have a faulty phone now. Probably why you had a problem to start with. Msm takes you back to factory reset. Should work but if the problem is still there looks like its hardware. ?