Database Info

[DEVELOPMENT STOPPED][Unofficial][TWRP] for YU Yunicorn

DEVELOPMENT OF CUSTOM ROMS FOR YU YUNICORN STOPPED DUE TO LACK OF KERNEL SOURCES
Warning: This may not work for the MM version of Yunicorn. Because YU had sent patches in the updates. So try this and if it doesn't work, do some porting yourself .
Hey guys this thread is for TWRP for YU Yunicorn, the most popular custom recovery is now available for YU Yunicorn
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
TWRP is helpful in flashing custom ROMs and do a nandroid backup and now available for Yunicorn.
Click to show steps of flashing TWRP in YU Yunicorn
First make sure you have installed proper drivers on your PC, then follow the flashing procedure.
1. Download and extract SP Flash Tool and the recovery.zip on your PC.
2. Open and run flash tool.exe as administrator.
3. Click on the scatter loading button and select the scatter file from the recovery folder.
4. Click on download button and connect your smartphone to PC via USB cable and wait for the flashing process it will take 20-30 seconds.
Note: Switch off your smartphone before connecting to your PC then connect and do not interrupt the flashing process.
5. Boot into recovery by pressing VOL UP + VOL DOWN + POWER button.
Now, you have successfully installed TWRP on your mobile.
Download SP Flash Tool form here.
In some cases you are not able to see TWRP after booting into recovery. You have to flash the recovery twice when you face this problem.
CHANGELOG
What's new in 3.0.1-0:
support new CM 13.0 pattern encryption (sultanqasim)
fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
libtar updated to latest upstream and fixes (jcadduono)
fixes for loading custom themes (_that)
TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
translation updates - added Italian, Czech and Polish and significant updates to Dutch
progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
fix input box text display (Dees_Troy)
reboot option after zip install complete (bigbiff)
other mostly invisible bug fixes and improvements
BUGS
- Touch in TWRP works after 10-15 seconds when boot into recovery
- other bugs you tell me
NOTE: THIS IS NOT OFFICIAL TWRP AND MAY NOT BE STABLE DO IT AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANYTHING WRONG HAPPENS. FEEL FREE TO ASK QUESTIONS.
Current latest Version: 3.0.1-0
Download TWRP recovery.zip from below.
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
TWRP_3.0.1-0
Do not forget to press the thanks button

Great work bro. I will try today and keep you posted.

Best recovery
Recovery is working nice. :good:
No bugs till now.

Post the download link
Cm 13 for yunicorn yu5530. Post the download link for c13 or rr rom

Dishonor96 said:
Cm 13 for yunicorn yu5530. Post the download link for c13 or rr rom
Click to expand...
Click to collapse
Not available now, you have to wait because camera, fingerprint, audio, gps, wifi, thethering, not working.
Don't worry we are working on fixing these.
Sent from my OnePlus 3T using XDA Labs

This method is not working for me on marshmallow. My phone got bricked after flashing recovery.

Still working?
_saurabh__._ said:
Not available now, you have to wait because camera, fingerprint, audio, gps, wifi, thethering, not working.
Don't worry we are working on fixing these.
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
Aa? No

starckarcimi said:
Aa? No
Click to expand...
Click to collapse
We tried to fix those bugs, but no luck. A successful porting for Yu Yunicorn isn't possible without kernel source. But still you can try porting yourself, refer to some useful posts on XDA. ,

Dude help me
I tried my times through Sp Flash it says done at last but once i boot in recovery it open up with old recovery options not twrp, I also tried Adb Fastboot tool. Once file transfer it dont boot is twrp recover..... M pissed please help me to correct this Its been 3 days now its very imp for me to root my phone coz my Imei Invalid.... It will get fixed after rooting my phone.

_saurabh__._ said:
Hey guys this thread is for TWRP for YU Yunicorn, the most popular custom recovery is now available for YU Yunicorn
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
TWRP is helpful in flashing custom ROMs and do a nandroid backup and now available for Yunicorn.
Click to show steps of flashing TWRP in YU Yunicorn
First make sure you have installed proper drivers on your PC, then follow the flashing procedure.
1. Download and extract SP Flash Tool and the recovery.zip on your PC.
2. Open and run flash tool.exe as administrator.
3. Click on the scatter loading button and select the scatter file from the recovery folder.
4. Click on download button and connect your smartphone to PC via USB cable and wait for the flashing process it will take 20-30 seconds.
Note: Switch off your smartphone before connecting to your PC then connect and do not interrupt the flashing process.
5. Boot into recovery by pressing VOL UP + VOL DOWN + POWER button.
Now, you have successfully installed TWRP on your mobile.
Download SP Flash Tool form here.
In some cases you are not able to see TWRP after booting into recovery. You have to flash the recovery twice when you face this problem.
CHANGELOG
What's new in 3.0.1-0:
support new CM 13.0 pattern encryption (sultanqasim)
fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
libtar updated to latest upstream and fixes (jcadduono)
fixes for loading custom themes (_that)
TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
translation updates - added Italian, Czech and Polish and significant updates to Dutch
progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
fix input box text display (Dees_Troy)
reboot option after zip install complete (bigbiff)
other mostly invisible bug fixes and improvements
BUGS
- Touch in TWRP works after 10-15 seconds when boot into recovery
- other bugs you tell me
NOTE: THIS IS NOT OFFICIAL TWRP AND MAY NOT BE STABLE DO IT AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANYTHING WRONG HAPPENS. FEEL FREE TO ASK QUESTIONS.
Current latest Version: 3.0.1-0
Download TWRP recovery.zip from below.
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
TWRP_3.0.1-0
Do not forget to press the thanks button
Click to expand...
Click to collapse
Is it stable??
Any further updates...

RyanRaina1 said:
I tried my times through Sp Flash it says done at last but once i boot in recovery it open up with old recovery options not twrp, I also tried Adb Fastboot tool. Once file transfer it dont boot is twrp recover..... M pissed please help me to correct this Its been 3 days now its very imp for me to root my phone coz my Imei Invalid.... It will get fixed after rooting my phone.
Click to expand...
Click to collapse
Did you tried flashing the recovery twice ? By twice I mean, after flashing the recovery, press the download button again in SP Tool and let the recovery to flash again, do not boot your phone in either recovery or system between the two times flashing procedure. Try again.
Hey, if you want to fix invalid IMEI, nothing is working on Marshmallow, even if you root your device and edit IMEI by any of the Root apps like Chamelephon MobileUncle Tools it will give a wierd IMEI like 40#[email protected]. The only way to fix IMEI is to flash lollipop ROM again by SP Flash tool. https://drive.google.com/file/d/0B2MZMs2kUcOZeXd6dkdTc0M5TEk/view. This is download link for LP stock ROM, thanks to Ayushmaan Thakur who extracted this. After flashing LP root using TWRP or Kingroot app both will work then use Chamelephon to change IMEI, you can also use Engineer Mode for changing IMEI if Chamelephon isn't working. Then update to Marshmallow.

jowinjohnchemban said:
Is it stable??
Any further updates...
Click to expand...
Click to collapse
For your info, it is the latest stable version, newer version aren't working smoothly and takes more time to boot into recovery.
Sent from my OnePlus X using XDA Labs

_saurabh__._ said:
For your info, it is the latest stable version, newer version aren't working smoothly and takes more time to boot into recovery.
Click to expand...
Click to collapse
I'm using YU Yunicorn 5530
And is under warranty period also...
After 2 months of purchase I faced charging issue that its not charging to 100% , stuck at 90%
---------- Post added at 05:06 AM ---------- Previous post was at 05:02 AM ----------
Does the source code of the mediatek soc for this device
MT6750 Octacore 1.95GHz
Released??
Or any stable custom ROM such as Lineage, Oxigen, Cyanogen,...

jowinjohnchemban said:
I'm using YU Yunicorn 5530
And is under warranty period also...
After 2 months of purchase I faced charging issue that its not charging to 100% , stuck at 90%
---------- Post added at 05:06 AM ---------- Previous post was at 05:02 AM ----------
Does the source code of the mediatek soc for this device
MT6750 Octacore 1.95GHz
Released??
Or any stable custom ROM such as Lineage, Oxigen, Cyanogen,...
Click to expand...
Click to collapse
Are you using Marshmallow version. If yes then you will surely having this problem. Because every Yunicorn user is having this problem,
Temparory fix- try clearing battery cache and dalvik then reboot, then do a complete discharge and then let it attain its maximum battery percent after that do a complete discharge again, then again let it attain the maximum battery percent. Do this 4-5 times, and your phone will be charging 100% again.
Permanent fix- you have to flash lollipop version, as it is stable.
No there is no source code released by YU, and no stable custom ROMs are available, Note that the stock ROM isn't stable, how custom ROM be stable.
Sent from my OnePlus X using XDA Labs

hateis said:
This method is not working for me on marshmallow. My phone got bricked after flashing recovery.
Click to expand...
Click to collapse
Have you flashed it correctly? Are you using latest version of SP Flash tool? Make sure that there is no corrupt file. Note that this recovery is tested many times. Which type of brick it is? I am reposting the link, try again then.
Sent from my OnePlus X using XDA Labs

Anybody got twrp on marshmallow successfully

hateis said:
Anybody got twrp on marshmallow successfully
Click to expand...
Click to collapse
Yup
Sent from my OnePlus X using XDA Labs

I am not able to go through boot logo .....
After flashing ??

jowinjohnchemban said:
Is it stable??
Any further updates...
Click to expand...
Click to collapse
Not stable on some mobiles.
Sent from my OnePlus X using XDA Labs

Is this recovery working on marshmallow? It seems like my device is bricked

OUKITEL K10000 Pro - Development & Support

In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.​
HOW-TO Root, Install Custom Recovery (TWRP) and Restore Stock ROM guide: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 7.0)
- Latest Official: http://www.oukitel.com/latest-software-rom-for-all-oukitel-devices-48.html
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- 20170531: https://mega.nz/#!dp5nHZAK!FTlFRNtQnckczFqIZnTvNy6kCRdeZtMDXyE9FDlVgfU
Flash Tool
- SP Flash Tool for Windows and Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A​
Recovery:
- TWRP 3.1.1 by @jemmini for devices running the V1 release: https://mega.nz/#F!4QMF2Cab!8eekL_9tx9yMLk3LmE8Rww
- TWRP 3.1.1 fastboot bootable based on the V12 release: https://forum.xda-developers.com/showpost.php?p=75115011&postcount=73​
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu​
Extras (Root-Only):
Customization
- Xposed Framework (not available on Nougat yet): http://forum.xda-developers.com/showthread.php?t=3034811​
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en​

Hi Guys,
We hope someone to release TWRP. Moreover, anyone knows how to unlock the bootloader?!
By the way, anyone knows where to find a custom ROMs for this nice phone.
Thanks.

Hi, When I flash my ROM I have "STATUS_SEC_DL_FORBIDDEN".
My phone only have a black screen ...
I think I have flash a wrong preloader...
But I have the "serial" port.
And, I can flash other partition, exept preloader and secro...

Hi, I have return my Phone, I have buy new One, less expensive (yes already discounted on the same website ! 15€ less !).
I don't know if he come with Silicone Case or not.
But I will try again to root it !

Already any news or ideas how to safely root and install TWRP on the OUKITEL K10000 Pro? Would be great! Thanks in advance!

Hi, I have tried to read my NVRAM:
The computer say when I start my phone:
ERROR: STATUS_BROM_CMD_DA_FAIL (0xC00660003)
What's append ?

I have finaly find to root it myself.
https://forum.xda-developers.com/general/help/how-to-root-oukitel-k10000-pro-t3626105
I can upload my very bad test TWRP recovery (image is inverted lol, and it's in russian by default !)
But it's too heavy for XDA. If I have time I publish it on my website.

ROOT?
I want to root my device. Can anyone approve the friend FukTheRegister method?
Ask for help and guidance.

Anyone working on a custom rom or something like that?

Hi everybody, I guess there is no (easy) way to get a working TWRP so far, and also no root? Would be great if both would be possible Thanks in advance!

steff_1964 said:
Hi everybody, I guess there is no (easy) way to get a working TWRP so far, and also no root? Would be great if both would be possible Thanks in advance!
Click to expand...
Click to collapse
Both seems to be possible. Haven't tested the needrom method yet and i wonder if it's worth it.
https://forum.xda-developers.com/showpost.php?p=73565111&postcount=8

steff_1964 said:
Hi everybody, I guess there is no (easy) way to get a working TWRP so far, and also no root? Would be great if both would be possible Thanks in advance!
Click to expand...
Click to collapse
I'm sorry, i forgot to update the thread. TWRP added to the first post

Hi guys, I received yesterday my Oukitel k10000 pro. I put in root a dozen MTK phones but this one is very annoying.
I tried to make a root by fastboot by first unlocking the boot and then flashing the recovery with TWRP. with needrom method . Result: bricked phone, blocked on the start logo.
Required to flash with the original rom with the utility SP flash tools: always "ERROR: STATUS_BROM_CMD_DA_FAIL (0xC00660003)"
finally it works if I format memory first ... the original rom is reinstalled but I lost nvram ... arrrrrrrggggggg
My phone is now in stock, but I lost my Imei ... dirt.
I was able to install TWRP via fastboot on the second try, TWRP starts in Russian and does not recognize the size of partitions that do all 0KB and can not mount partitions ..... I think this version of TWRP is not compatible yet with this phone!
I do not know what to do to root this damn phone properly.
*Has anyone managed to root this phone properly?
EDIT: Finally Nvram restored with SN_Writer_Tool_v1.1728 . Exellent software.

rumopi said:
Hi guys, I received yesterday my Oukitel k10000 pro. I put in root a dozen MTK phones but this one is very annoying.
I tried to make a root by fastboot by first unlocking the boot and then flashing the recovery with TWRP. with needrom method . Result: bricked phone, blocked on the start logo.
Required to flash with the original rom with the utility SP flash tools: always "ERROR: STATUS_BROM_CMD_DA_FAIL (0xC00660003)"
finally it works if I format memory first ... the original rom is reinstalled but I lost nvram ... arrrrrrrggggggg
My phone is now in stock, but I lost my Imei ... dirt.
I was able to install TWRP via fastboot on the second try, TWRP starts in Russian and does not recognize the size of partitions that do all 0KB and can not mount partitions ..... I think this version of TWRP is not compatible yet with this phone!
I do not know what to do to root this damn phone properly.
*Has anyone managed to root this phone properly?
EDIT: Finally Nvram restored with SN_Writer_Tool_v1.1728 . Exellent software.
Click to expand...
Click to collapse
hey bro same problem but i not find the db file for sn writer

Oneplus# said:
hey bro same problem but i not find the db file for sn writer
Click to expand...
Click to collapse
The files are located into the original rom

rumopi said:
The files are located into the original rom
Click to expand...
Click to collapse
Wrote imei manually in engineering mode cause i not found it
The twrp on first post cause bootloop someone need to delete it...
BTW this is my temporary solution for root and use this phone:
1) i downgraded the phone to the previous build
2) after that I lose imiei
3) flashed twrp by needrom NB. (When u open this twrp u need to flash supersu or will get bootloop)
4) It will boot and u will get root
5) open engineering menu and open GPRS section, then fill imei manually and press write, reboot and voilà imei back and phone rooted.
Problems:
-U can't boot twrp after that or u will get bootloop(I think) if someone's want to test...
-U need to stay on older build to have it working
-If u upgrade u lose root
-SuperSU not pass safety net
Pro:
-U have root and imei back
Ps. I'm totally a noob on battery related stuff... I bought this phone for his battery... But my question is: after all this flash to get all working (before found this solution I flashed like 20 times) I need to make a cycle of battery charge or it is OK? Thanks

MT6755
Hey!
Anyone knows that is there a rom for MT6755? I have that version on my K10000 Pro,
and currently phone is without an OS.. So im kinda stuck in here.
Or is it that i just don't know what im doing..? ^^ First time rooting.
It went sideways, and phone has only twrp flashed.

Personally, I resold it. the sound is really execrable.

The K10000 max impressed me so I ordered one despite I dont real need one
I hope OREO will come soon

there is a new version on needrom.com OUKITEL_K10000_Pro_V6.0_20170726. but the recovery from V.1 is not working.. (cant go to reecovery and creates bootloop) if u find a new recovery pls post it here. Thx in advance!

Huawei P8 Lite 2017 [Universal Kangvip-ROM V1] XPOSED

[Custom ROM] [K-ROM-Universal] [Root+Xposed] V. 1.0 - EMUI 8.0.0.
This ROM is based on:
Huawei Firmware EMUI 8.0.0. and Kangvip ROM M8.828
It was developed and tested on this device:
Huawei P8 lite 2017 (Prague)
Model Number: PRA-LX1
EMUI 8 Build Number: PRA-LX1 8.0.0.394(C432)
- OTA updated
- free device, without branding, with root and
- TWRP recovery
The following mods have been integrated and activated:
- Call Recorder
- KangVip Advanced Settings
- Xposed
Whether the rom will work on provider branding, or another firmware version, can be
I don't guarantee, however, it should work on all free Huawei/ Honor devices with EMUI 8.0.x.
I successfully tested it on the Mate 8, the Honor 6x and the Mate 10 Lite.
Please create a backup of your data with the Huawei data backup.
The ROM will be installed as if you wanted to restore a TWRP backup.
Before the ROM installation, please create a TWRP backup for emergencies!
Recommended by me:
- kernel
- ramdisk
- system
Prerequisites:
- TWRP Recovery
- Firmware 8.0.0.394(C432)
- The device must be completely set up.
- Please perform a Google Account synchronization.
You are familiar with the matter and have already used TWRP Recovery is installed and
a backup is created on the ExtSd. The attached TWRP is mandatory. It is fully functional.
Lets go:
Instructions how to install the bootloader(OEM lock) and the Factory Reset Protect (FRP-Lock)
and ADB, can be found here in the forum. See also "Unlocking with DC Unlocker".
Instructions:
1. Install TWRP:
The download also includes ADB-Fastboot.
Simply copy the complete directory into your computer and run MAF32.exe from there.
The recoverys are already included.
ADB command for TWRP:
fastboot flash recovery_ramdisk twrp.img
2. Rom-Installation:
Unzip the download "2018-12-05-Universal.K-Rom.EMUI.8.0.zip" (1.15 GB).
The backup folder created in this way 2018-12-05-Universal.K-Rom.EMUI.8.0
into the TWRP-Backup folder copy to the ExtSd and only the system partition restore.
3. Advanced Wipe: Dalvik Cache and Cache
4. Rooting with Magisk 17.1 (18 not tested)
5. Reboot
6. Install Magisk modules.
7. Reboot.
Do not flash the kernel from the download. It's from the B390.
Thread update: 2017-12-14:
The pre-rooted stock magisk kernel is now available for download, as TWRP-Backup: "2018-12-14-rootet.magisk.kernel.B394"
Good luck!
....and remember: A Custom ROM is never as perfect as a Stock ROM.
You have to teach it something in between.
Developer:
"Kangvip" Huawei Development [Team HRT]
“G.Man." Huawei Root & Custom Roms [Team HRC]
Many thanks to:
Kangvip,Team HRT, Cris- (Android-Hilfe.de), Chainfire,
Stephen (Stericson) + Jmz Software, Team Win RecoveryProject, Pretoriano80 (TWRP), team MT,
and Huawei Technologies Co., Ltd 华为技术有限公司
WARNINGS:
If all this has worked with my device, it doesn't mean it works with everyone else. Follow the instructions
exactly to prevent damage. The execution is your risk.
NOTE:
Despite careful preparation, I cannot guarantee that no damage to the device or operating system will
occur as a result of the implementation of this manual and therefore accept no liability for any damage
or malfunction to hardware or software! If you are still unsure, follow these steps: Only follow the
instructions if any of the conditions mentioned (model number, Android version, etc.) apply to you or
your device. Read instructions carefully and completely, look up unknown terms. Check downloaded
files for viruses. Make a backup of important settings and data. Do not follow the instructions,
if you don't know what you're doing.

So good to see you back ! Thank you

Hi,
I'd bricked my device pretty bad with the trebble roms.
It now awakened again to live with DC PHOENIX.
Back to good old EMUI. Is still the best.
:good:

G.Man. said:
Hi,
I'd bricked my device pretty bad with the trebble roms.
It now awakened again to live with DC PHOENIX.
Back to good old EMUI. Is still the best.
:good:
Click to expand...
Click to collapse
Even openkirin's gsi ? Havoc 2 works on my prague for 3 months w/o problems (Wirmpolter's gsi hi3660 mate 9 thread).
I test your rom now...
Nice evening (and EMUI)

Hi i have a B360 version firmware, the latest for my branded phone. Can i install your ROM whit this version? If yes i have to restore only image partition or others?? Sorry for my English

The system is for the 394. With the kernel (into my twrp backup) it also works on the 390. Otherwise not.

Sorry, I made a mistake in the manual and confused the installations steps. I have corrected that now.

G.Man. said:
Sorry, I made a mistake in the manual and confused the installations steps. I have corrected that now.
Click to expand...
Click to collapse
With the new manual, it boots! It works perfectly now.
Xposed not tested, magisk 18.1 does not work, 17.1 (provided by you) works.
Let's debloat and tune it... A huge thanks for this rom !

actinhic said:
Let's debloat and tune it...
Click to expand...
Click to collapse
I'm glad you were successful. Remember when tuning that it has only a stock kernel.

I have the rom now 4 weeks in operation. Everything runs perfectly.

I can't get it to work , keep bootlooping at huawei bootanimation screen...

Managed to make it work , but I can't pass basicIntegrity and CTS from SafetyNet

hexxr said:
I can't get it to work , keep bootlooping at huawei bootanimation screen...
Click to expand...
Click to collapse
Roote again with magisk 18.

hexxr said:
Managed to make it work , but I can't pass basicIntegrity and CTS from SafetyNet
Click to expand...
Click to collapse
A positive result is not possible with this rom. Maybe you are lucky if you uninstall xposed. In "system/framework", delete "XposedBridge.jar" and reboot.

Hi, has anyone tested XPosed, and does it work?

I tested xposed and I confirm it works (if you're still interested).
The ROM performs very well, nice (magisk and xposed out of the shell and Kangvip settings) there is one, big drawback although I'm only 90% sure: it sets FRP to lock. @G.Man. (OP) do you know something more (is that correct, how to avoid it) ?

That's not a problem. In the developeroptions, activate oem unlock and usb debugging and the frp is unlocked.

thanks for your prompt reply; unfortunately oem unlock is disactivated and grayed out (usb debug is activated)

Repeat the oem unlocking with the huaweicode.

first of all thanks for the support!
I can repeat the bootloader unlocking with the huawei code but my problem is only the FRP lock: phone is correctly unlocked. Do you confirm I should do what you're suggesting ?

Latest Rom, Firmware, Twrp, Root Guides & Lists For C7 / C7 Pro

Hey There Were No Posts Regarding Latest Bootloaders, Firmwares, Twrp, Etc... For C7 And C7 Pro.
So I Thought Of Making This Thread Which Will Be Useful For My Other Rom Threads
OK , So Here Are The Shortcut Links To The Specific Post Directly -
#1 Latest Official Full Firmware -
#2 Latest Official Bootloader -
#3 Root Guide -
#4 Latest TWRP Recovery -
#5 OEM Unlock Guide -
#6 Soft/Hard Brick Recovery -
Basics-
-Our Samsung Android Devices Have Three Modes, Namely -
2 System
1 Recovery Mode
3 Download Mode
1) System-
It Is The Normal Workaround That Every Device Normally Boot To Which We Also Call As TouchWiz, One UI, Etc...
You Normally Have To Just Power On Your Device And It Directly Boots To System And The System Is Normal Under Control Of The Vebdor (ie: Samsung, One Plus,etc..) Who Deny Full System Access There By Restricting The User From Modifying All Thats There In The Root Directory, So Here Is What We Mean By Rooting Your Device -
And Custom Rom Means Nothing But Replacing Your Stock System With A modified Or With A Custom System ....
2)Root -
There Is A Thing Called Root Folder Which Is The Very First Directory In Your Device And Usually These Directories Cannot Be Accessed Directly Because Of OEM Control Over The Device And What We Mean By Rooting Is Nothing But
The Process Of Handing Over The Control Of Device From Oem To A Root Manager (A App That Monitors Root Activity) Is Called Rooting..
3) Bootloader (AKA Download Mode In Android) -
It Is The Program That Manages The Booting Process (Before Kernel) And Also Service As A Recovery Point In Most Cases. Where You Will Use Tools To Communicate With It And Use The Bootloader As Medium To Intsall Other Firmware Including Root & Custom Recoveries. So For Installing Latest Firmware Files Latest Bootloader Is Needed ...
Official Bootloaders Are Usually Preferred, Which Has To Be Unlocked Via Developer Options (OEM Unlock)
4) Recovery -
This Is The Place Where We'll Be Hangin Out Most Of The Time For Installing Roms, Kernel, etc...
Basically Your Device Comes With A Stock Recovery Which Can Do Nothing But Just Format Data,Clear Cache & Redirect b/t System And Bootloader.... But Thats Not What We Need, So What We Do Is Install A Custom Version Of Recovery Which Can Be Replaced With Stock Recovery And Do What Ever Stuff We Want To ..
Why Go For Custom Recovery ?
Just Imagine A State Where Your System & All The System Security Have No Control (Or It Is Switched Off), That Is What A Custom Recovery Takes Advantage Of.....
OK, So In That Case The Custom Recovery Can Access The Root Directories And Can Make Modification To System Without The Systems Knowledge Or With The System Along Side,
These Days The Oem System Have Hardened Custom Recovery Detection And Stuff Like That, So We Need A Recovery & Also A system That Supports Custom Mods With It .... Inorder To Do That We Make Use Of Custom Recoveries To Delete The Existing System and Replace It With A Similar/Modified System Which We Call It As A Custom Rom, Which Allows Modification To Any Part Of The Device Without Interruption ... This Is What An Super User Basically Does When He/She Unlocks Bootloader And Makes Modification To System
The Most Common Recovery Is TWRP Recovery
5) Hard/Soft Brick -
Is A State Where You Cant Boot To System (Usually Soft Brick) & Face Bootloops Etc... This State Is Usually Recoverable By Flashing The Original Firmware Again..
When You Have Messed Something With The Kernel/Recovery (Recovery In Most Cases) ,Your Phone Wont Boot, Turn On, Literally Anything ...(Hard Bricked) In This Case You Have Only On Option That Is To Boot To Download Mod (It Wont Boot Via 3 Button Combo) But Still There Are Ways To even Recover From This State Like Using Usb Jibb Or By Plugging Into The Device Into The PC With The Flash Tool Running .... etc
6) Kernel -
A Kernel Is A Platform Below System And Hardware, It What Controls The Clock Speed, Cores, Etc And Other Hardware/Software Related Things In A Device, These Often Determine The Performance Of A Device & There Fore ppl Tend To Move To A Custom Kernel For Flexibility ....
Will Add More Basic Tips

Official Fimware C7 / C7 Pro
Official Firmware -
C7 Pro -
C701f -
Link To The Latest Oreo [8.0] Firmware For C701f - C701F 8.0 FIRMWARE
C7010 -
Link To The Latest Oreo [8.0] Firmware For C7010 - C7010 TGY 8.0 FIRMWARE
C7018 -
Link To The Latest Oreo [8.0] Firmware For C7018 - C7018 CHC 8.0 FIRMWARE
Click to expand...
Click to collapse
C7 -
C7000 -
Link To The Latest Oreo [8.0] Firmware For C7000 - C7000 tgy 8.0 FIRMWARE
Click to expand...
Click to collapse
Instruction For Installing The Stock Firmware-
•Download the The Correct Firmware For your Device From The Above Links
•Download The Latest Odin (v3.13)
•Extract The Firmware Using The Extraction Tool (7zip,winter,etc)
•Install The Proper Drivers For Your Device - Samsung Drivers
•Run Odin In Your Windows and click on "bl" and locate the bl***********.md5 ( "**" Reprsents Some Similar File In The Firmware Zip) file in the file browser
Similarly Locate "ap","csc" In The Same Way , (do not click on "home csc")
•Go To Odin Mode Or Download Mode In Your C7/C7 pro By Pressing Vol Down + Power + Home Key for 30 sec.
•Then Connect Your Phone To The PC & Click On Start In Odin Once You See A "added" Text .
•Click On Start When Everything Is Ready .... And If Everything Goes Well You'll See A Green Pass Icon In Odin & And Your Device Will Boot To System Within (7-15) Min .
Click to expand...
Click to collapse

root ----WILL ADD, GIMME SOME TIME---

Ill make a guide if possible... rn ill just provide the links for twrp -
TWRP (C7)
TWRP (C7 Pro)

Custom ROMS For C7 & C7 Pro -
C7 Pro -
1) Eulah Rom
Supported Devices - C701F/C7010/C7018
Current Version - v2
One UI Based Rom
Maximum Feature Packed
Fully Customizable Via Installer
With Latest One UI
Several Mods & Ports
The Best Rom So Far
Thread Link - Eulah Rom
2) Sudo Rom
Supported Devices - C701F/C7010/C7018 | C7000
Current Version - v1
Samsung Experience Based Rom
Super Lite Package with Lite & Smooth Environment
Hyper Performance (Best Rom For Gaming)
Multi Variant & Csc Support
The So Far Latest Rom
Thread Link To - Sudo Rom
3) Sudo Lite Rom
Supported Devices - C701F/C7010/C7018
Current Version - v1
Samsung Experience Based Rom
C9 Pro Port With Minimal & Easy Installation Process
Lightest Package with Lite & Smooth Environment
Super Fast Booting Speed
Thread Link To - Sudo Rom Lite
4) Jesvi Stock Oreo Rom
Supported Devices - C701F
Current Version - v1
Samsung Experience Based Rom
No Edits No Nothing, Just Pure Stock With Needed Patches
Base Rom & Can Be Used For Development
Thread Link To - Jesvi Stock Oreo Rom
5) Lite Rom
Supported Devices - C701F
Current Version - v6
Dream UX Based Rom
Lite Rom
Comes With Nougat Mods
Smooth Environment
Thread Link To - Lite Rom Nougat
6) Lineage OS 14.1
Supported Devices - C701F
Current Version - v1
AOSP Based Rom
You Get All The Benefit Of Lineage OS Nougat
Light Package
Alpha State
Thread Link To - Lineage Os 14.1
Click to expand...
Click to collapse
C7 -
1) Sudo Rom
Supported Devices - C701F/C7010/C7018 | C7000
Current Version - v1
Samsung Experience Based Rom
Super Lite Package with Lite & Smooth Environment
Hyper Performance (Best Rom For Gaming)
Multi Variant & Csc Support
The Latest Rom
Thread Link To - Sudo Rom
Click to expand...
Click to collapse

Latest Bootloader -
C7 Pro -
C701f -
Link To The Latest Oreo [8.0] Bootloader For C701f - C701F Latest Bootloader
C7010 -
Link To The Latest Oreo [8.0] Bootloader For C7010 - C7010 Latest Bootloader
C7018 -
Link To The Latest Oreo [8.0] Bootloader For C7018 - C7018 8.0 Bootloader
Click to expand...
Click to collapse
C7 -
C7000 -
Link To The Latest Oreo [8.0] Bootloader For C7000 - C7000 Latest Bootloader
Click to expand...
Click to collapse
Instruction For Flashing The Latest Bootloader-
•Download the The Correct Bootloader File For your Device From The Above Links
•Download The Latest Odin (v3.13)
•Extract The Firmware Using The Extraction Tool (7zip,winter,etc)
•Install The Proper Drivers For Your Device - Samsung Drivers
•Run Odin In Your Windows and click on "bl" and locate the bl***********.md5 ( "**" Reprsents Some Similar File In The Firmware Zip) file in the file browser. Similarly click on " " and locate the " **********.md5".
•Go To Odin Mode Or Download Mode In Your C7/C7 pro By Pressing Vol Down + Power + Home Key for 30 sec.
•Then Connect Your Phone To The PC & Click On Start In Odin Once You See A "added" Text .
•Click On Start When Everything Is Ready .... And If Everything Goes Well You'll See A Green Pass Icon In Odin & And Your Device Will Boot To System Within (7-15) Min .
Click to expand...
Click to collapse

Oem Unlock (Not Visible bug) ----WILL ADD, GIMME SOME TIME, im feling sleepy right now---

jesvi said:
Oem Unlock (Not Visible bug) ----WILL ADD, GIMME SOME TIME, im feling sleepy right now---
Click to expand...
Click to collapse
did you wake up?

agritux said:
did you wake up?
Click to expand...
Click to collapse
Hahaha, *slept to death..
sry man , give me aome time

jesvi said:
Twrp 3.2.3 ----will add, gimme some time---
Click to expand...
Click to collapse
How much time do you need?

mrdeepmind said:
How much time do you need?
Click to expand...
Click to collapse
Check out the for some threads in c7 or c7 pro section in xda till i fully complete this thread..:good:
EDIT : I have added the links for twrp.

jesvi said:
Ill make a guide if possible... rn ill just provide the links for twrp -
TWRP (C7)
TWRP (C7 Pro)
Click to expand...
Click to collapse
I cant flash any ROM with any TWRP, i downloaded from all possible places (ROMs and TWRPs), it just crashes when i try, and restarts. I am not able to find official TWRP for my Samsung C7 Pro (C701F), But there are ROMs available and some youtube guy also installed it, dont know how.

Deval99 said:
I cant flash any ROM with any TWRP, i downloaded from all possible places (ROMs and TWRPs), it just crashes when i try, and restarts. I am not able to find official TWRP for my Samsung C7 Pro (C701F), But there are ROMs available and some youtube guy also installed it, dont know how.
Click to expand...
Click to collapse
Hello, this twrp works fine with the latest firmware and roms in the forum...
Make sure u have completely erased your data,system,cache & do a 'format data' in twrp before installing any rom or anything... coz this removes the system encryption...
And make sure the rom file is good and not corrupt...

jesvi said:
Hello, this twrp works fine with the latest firmware and roms in the forum...
Make sure u have completely erased your data,system,cache & do a 'format data' in twrp before installing any rom or anything... coz this removes the system encryption...
And make sure the rom file is good and not corrupt...
Click to expand...
Click to collapse
Yup i ensured all of these (even md5 checksum of file downloaded), But not working. I will follow the steps you given and try to install.

Android 11 Red Magic Rom [FLASHGUIDE]

Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool

Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!

nalin_s3 said:
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
Click to expand...
Click to collapse
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!

Perseo99 said:
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Click to expand...
Click to collapse
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ??

nalin_s3 said:
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ?
Click to expand...
Click to collapse
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.

Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Can you check your pm??

There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool

jepoyxxv said:
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
Click to expand...
Click to collapse
I already went to 11 and flash to 3.11

But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me

jepoyxxv said:
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
Click to expand...
Click to collapse
If you are in 11 beta and want to downgrade..just simple flash global version and again flash 3.11 done

What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.

jepoyxxv said:
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
Click to expand...
Click to collapse
I just flash global from otg and tham again 3.11

walkwitmeinhel said:
I just flash global from otg and tham again 3.11
Click to expand...
Click to collapse
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.

[email protected] said:
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
Click to expand...
Click to collapse
http://ui.nubia.cn/rom/detail/64

Oh! Didn't expect that. I just post this for Red Magic 3 device users. I don't know how RM3S actually works. Have you tried the unbrick tool from chinese version? Or just flashing the global rom from recovery is enough?

Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...

jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
Let's see. Here is a link for Red Magic 3S unbrick tool. Download the non-eu ones.
If you have a Red Magic 3 with Red Magic 3s software, I will provide you the link to the other unbrick tool.
Also, you can try flashing the global rom from the stock recovery included in the package of the A11 rom that you have download.

Thanks for replying my bro.. my device is rm3s i already use rm3 and rm3s unbrick tool.. downloading fire hose programmer and image was successfully but.. my phone is still corrupted... And one thingg i dont have twrp install in my rm3s thats why its hard for me to fix it.. can you please guide or teach me how to flash stock recovery using global rom i know how to use cmd and adb

jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
So then, It's not a problem of the unbrick tool, that is actually working properly. The thing is that you didn't know how to do a correct process to migrate from cm rom to global...
The first thing you should do is reboot the phone into fastboot mode (power+vol. Down). Then, connect the phone to the PC and type the next commands in the cmd:
Code:
fastboot devices
in order to see if your device is being recognized
Code:
fastboot oem nubia_unlock NUBIA_NX629J
to unlock the bootloader
Code:
fastboot flashing unlock
in order to make your phone able to boot with a modified software. In the moment you will enter this command, you will see a screen advising you about your data (it'll be erased once you accept to unlock flashing).
After that, you can reboot your phone, that will show you an screen advising you that the bootloader is open. Accept and continue without problems.
Tell me if you have been able to make your phone boot.

Perseo99 said:
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Click to expand...
Click to collapse
Required in CN A10 + twrp A10, or maybe from CN A9 + twrp A9 to be able to flash