Database Info

Imei invalid after factory reset

I cant receive and make calls after I do factory reset of my phone ....Also I get Invalid Imei when I check by *#06#...I have to go to service centre again and again to put my imei number back after every factory reset......:crying::crying::crying::crying:..Kindly tell me what to do...I have a micromax a110 canvas 2 phone

mickeybatio said:
I cant receive and make calls after I do factory reset of my phone ....Also I get Invalid Imei when I check by *#06#...I have to go to service centre again and again to put my imei number back after every factory reset......:crying::crying::crying::crying:..Kindly tell me what to do...I have a micromax a110 canvas 2 phone
Click to expand...
Click to collapse
Those Guys out there in MMX service centre are nut xD.Okay you got your imei wiped .Its actually due to change of ur mother board.not an problem.its easy to implant it again.find ur both imei number in the packaging box .note it down in a piece of paper.now go to engineer mod and select GPRS .Choose the first sim and enter the first imei there .click write imei ---> ok , click attached--->ok ,click detached---> okay
Now repeat this for the second sim and enter the second imei.reboot the phone. Now check ur imei You can now reset your phone even for 1000 times but you have to implant it again and again every time u flash a new rom or reset

engineer mode
hi bro ur advice is a little bit helpfull to me, but the thing is before i've changed my ''''engineer mode > debug utils > debug level to 'user mode'. so my question is whether it should be in user mode or engineer mode. i'm asking u bcoz i am able to get into gprs but i didn't get any sim1 or sim2 option like that to follow ur previous steps. so pls guide me more clearly bcoz i'm a new beee.
my phone is showing no emie:crying:.
even one more doubt bro. eventhough i put my phone in usb debugging mode when i connected it to computer it is showing pls put ur phone in debugging enabled mode:crying::crying:. so how to overcome this problem. i'm unable to connect to pc.
pls help me

chaitu.swaroop said:
hi bro ur advice is a little bit helpfull to me, but the thing is before i've changed my ''''engineer mode > debug utils > debug level to 'user mode'. so my question is whether it should be in user mode or engineer mode. i'm asking u bcoz i am able to get into gprs but i didn't get any sim1 or sim2 option like that to follow ur previous steps. so pls guide me more clearly bcoz i'm a new beee.
my phone is showing no emie:crying:.
even one more doubt bro. eventhough i put my phone in usb debugging mode when i connected it to computer it is showing pls put ur phone in debugging enabled mode:crying::crying:. so how to overcome this problem. i'm unable to connect to pc.
pls help me
Click to expand...
Click to collapse
first select usb debuging option in developer optiion
then in eng mod go to radio wave option and put imi no

hi brother. thanks a lot for ur reply. i've tried what u said. but i'm unable to find that radio wave option. could u pls give the exact path so that it will be helpfull to me.
pls save my phone.
even though i put my phone in debugging enabled mode my pc is showing like pls put debugging mode on. this is another problem i am having right now. to root my phone i need this debugging mode enabled in pc. i've tried framaroot, z4root, z4 zte blade root, terminal emulator all the methods without pc i've tried to root my phone, but no use.
pls help me in this issue.
thanks a lot in advance :good:

hi brother i got a solution for my problem from addasjii a member in xda like us. thanks a lot for him & thanks for u for giving ur valuable ideas & ur valuble time for me & my posts.
the solution he has given is below
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app

Download the imei writing tool for m a110 http://support.moulnisky.com/index.php?dir=Micromax/00_A Serie/A110/Tools/

What if i do not know the IMEI nos?

very easy, back on ur phone inside d battery place
kamalahasang said:
What if i do not know the IMEI nos?
Click to expand...
Click to collapse
hi fnd u can know ur imei very easily. it is just back of ur phone. remove d battery & u can have ur both imei no.s there.:laugh::laugh:
hit thanks bcoz u know to hit as i helped u.

no luck at send failed heeeeeeeeelp please
chaitu.swaroop said:
hi brother i got a solution for my problem from addasjii a member in xda like us. thanks a lot for him & thanks for u for giving ur valuable ideas & ur valuble time for me & my posts.
the solution he has given is below
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Click to expand...
Click to collapse
fix it plzz

xdag700 said:
fix it plzz
Click to expand...
Click to collapse
IMEI is quite easy to fix ! Use MTK Droid tools to write ur imei or S/N Write tool. There are many tutorials browse through for how to use this tool !
Flashing stock ROM through SP should solve imei. First select format in sp and then flash ROM through sp. Then after first boot take imei backup as mentioned in this thread. And replace it every time u face problem !
http://forum.xda-developers.com/mic...artition-a110q-canvas-2-t2568182/post48447661
( See only IMEI related in this thread. Leave others )

Reset IMEI of A110
Hey! I have got the same problem in my Canvas HD. What I do is:-
1. goto dialer and type *#*#3646633#*#*
2. Goto CDS information
3. Goto Radio
4. On the command bar, type AT+ EGMR, 1,7"YOUR IMEI"
5. And send command
If it says command sent, then good but if not, remove SIM and try again .
6. Reboot
Note: For SIM 1, the command is AT+ EGMR, 1,7"YOUR IMEI" but for SIM 2 it is, AT+ EGMR, 1,10"YOUR IMEI"
I hope you got the answer! :fingers-crossed: :fingers-crossed:

my frnd was gettin this error so i told him this method
everything went well but after reboot his device showing the same error again plz help

[Q] Boot issue

Hello, I am new on XDA Forums and I have a problem and I am sure that XDA Developers will help me,
Yesterday I rooted my LG G Pro Lite Dual D686 Android 4.4.2 by VRoot then I replaced the Chinese Superuser with English SuperSu, anyway I installed fonts program and while setting a font my phone shutted down suddenly, I trying to reboot, it stucks on the logo screen
some people says its called bootloop or android brick I don't know.. all what I want is fixing my problem at home and not going to anywhere because if my parents knew, it will be the end of my life, I tried to go to recovery mode by holding down volume button and power button and when the logo appears I reset the power button then select and hold it again, it asked me if I want to reset settings, I said yes and reseted my settings but still the problem occurs.
If you have a solution please inform me about it, waiting for your answers.

Have you tried flashing a new stock ROM ?
By kdz of course.
Sent from my SM-N910C using XDA Free mobile app
---------- Post added at 01:40 PM ---------- Previous post was at 01:28 PM ----------
Fouad Hamdy said:
Hello, I am new on XDA Forums and I have a problem and I am sure that XDA Developers will help me,
Yesterday I rooted my LG G Pro Lite Dual D686 Android 4.4.2 by VRoot then I replaced the Chinese Superuser with English SuperSu, anyway I installed fonts program and while setting a font my phone shutted down suddenly, I trying to reboot, it stucks on the logo screen
some people says its called bootloop or android brick I don't know.. all what I want is fixing my problem at home and not going to anywhere because if my parents knew, it will be the end of my life, I tried to go to recovery mode by holding down volume button and power button and when the logo appears I reset the power button then select and hold it again, it asked me if I want to reset settings, I said yes and reseted my settings but still the problem occurs.
If you have a solution please inform me about it, waiting for your answers.
Click to expand...
Click to collapse
Go HERE !!! you might fix your phone.
http://forum.xda-developers.com/showthread.php?t=2594480

Rohan El Matador said:
Have you tried flashing a new stock ROM ?
By kdz of course.
Sent from my SM-N910C using XDA Free mobile app
Click to expand...
Click to collapse
I actually don't understand what is flashing a new stock ROM and what is ROM..
please tell me what is it and tell me the steps of how to do it.

I succeed in entering the download mode on my LG G Pro
but the drivers doesn't install on my computer, I already installed LGUnitedMobileDrivers but I still cannot see my mobile disk on the computer..

Fouad Hamdy said:
I succeed in entering the download mode on my LG G Pro
but the drivers doesn't install on my computer, I already installed LGUnitedMobileDrivers but I still cannot see my mobile disk on the computer..
Click to expand...
Click to collapse
Wait im writing the steps be patient beccause i'm searching for the links.

Fouad Hamdy said:
Where and how to download my mobile kdz file?
also what shall I select in the flashtool? Normal Flash or CSE flash
Click to expand...
Click to collapse
Step 1 : Dowload LG United Drivers >> http://www.mediafire.com/download/8...981MAN38AP22_ML_WHQL_Ver_3.8.1(0)_4.9.8.1.zip
Install it.
Step 2 : Download LG Mobile Support Tool >> https://docs.google.com/file/d/0B0nq1tbSSc_gRk5ObE1ucm1SSHM/edit?pli=1
Extract it.
Step 3 : Choose your kdz file to download here >> http://www.lg-phone-firmware.com/index.php?id_mod=38
If you were using v10 baseband choose v10
If v20 choose v20
Choose according to your country or the nearest country.
Note : do not extract the kdz file or it will break the file.
Step 4 : Put your LG G Pro lite into Emergency Mode by switching it off,
After the phone is off then hold the Volume Down or Up ( I dnt rememnber so try only one either Up Or Down. Your screen will be yellow an says emrgency mode ) wait for the drivers to finish loading on your if doing it for the first time.
After that open The Kdz Updater file you extracted in step 2.
Then Run KDZ_FW_UPD as administrator.
See the screenshot below.
If there is error msg at the end forget it.
The program will stop responding its normal wait for it
and if it says close program close it.
Reboot your phone manually.
Else
If their is no error msg your phone will restart normally.
Note : Im not responsible for any damage. Its on your own risk. Just trying to help you.
If you follow these steps properly everything will work fine.
Hope it helped.

Rohan El Matador said:
Step 1 : Dowload LG United Drivers >>
Install it.
Step 2 : Download LG Mobile Support Tool >>
Extract it.
Step 3 : Choose your kdz file to download here >>
If you were using v10 baseband choose v10
If v20 choose v20
Choose according to your country or the nearest country.
Note : do not extract the kdz file or it will break the file.
Step 4 : Put your LG G Pro lite into Emergency Mode by switching it off,
After the phone is off then hold the Volume Down or Up ( I dnt rememnber so try only one either Up Or Down. Your screen will be yellow an says emrgency mode ) wait for the drivers to finish loading on your if doing it for the first time.
After that open The Kdz Updater file you extracted in step 2.
Then Run KDZ_FW_UPD as administrator.
See the screenshot below.
If there is error msg at the end forget it.
The program will stop responding its normal wait for it
and if it says close program close it.
Reboot your phone manually.
Else
If their is no error msg your phone will restart normally.
Note : Im not responsible for any damage. Its on your own risk. Just trying to help you.
If you follow these steps properly everything will work fine.
Hope it helped.
Click to expand...
Click to collapse
What is V10 and V20? and wtf is baseband, explain please.

Anybody please help!
IN THIS HUGE SITE/FORUM THERE IS NO ANY PERSON TO HELP?

I downloaded V20B
but as you said, it gives me program stopped working error, I rebooted my mobile and started download mod (emergency mode doesn't work..) but still gives me the error, I am using the LGFlashTool in the topic u provided at the first, I used ur program but gives error too even when I reboot
REMEMBER, MY PHONE DOESN'T EVEN OPEN, ITS STUCK ON THE LOGO SCREEN (BRICKED)

Forget aboutd baseband. Do you remember what firmware your phone was using. In the "about device" v20(A,B....) or v10(A,B....). If you know it tell me.Otherwise i wont be able to help you.
Sent from my SM-N910C using XDA Free mobile app
---------- Post added at 08:18 PM ---------- Previous post was at 07:46 PM ----------
Fouad Hamdy said:
What is V10 and V20? and wtf is baseband, explain please.
Click to expand...
Click to collapse
i made a mistake.
v10 and v20 are the firmware versions of your phone.
baseband consist of radio and mobile signal that enables you to communicate.
---------- Post added at 08:32 PM ---------- Previous post was at 08:18 PM ----------
Fouad Hamdy said:
I downloaded V20B
but as you said, it gives me program stopped working error, I rebooted my mobile and started download mod (emergency mode doesn't work..) but still gives me the error, I am using the LGFlashTool in the topic u provided at the first, I used ur program but gives error too even when I reboot
REMEMBER, MY PHONE DOESN'T EVEN OPEN, ITS STUCK ON THE LOGO SCREEN (BRICKED)
Click to expand...
Click to collapse
I forget to mention in step 4. After turning off the phone remove the battery. The hold volume down key and conect the usb cable in your pc first and then to your phone. Do not release the volume down key until you get emergency mode.
After updrage the pc program will crash and it will dispaly close program dialog.
close it and remove your usb and insert your baterry.
Now your phone should boot up. It will take some time plz be patient.

HTC D310w bricked and restore SKU ;CID ;IMEI

OK I've found solution to restore IMEI and SKU ,CID of this dead phone after one week
After many attempts my phone works ok without that error on screen about sku ,cid and without null imei now
For those with bricked htc d310w if help needed just pm and i will reply asap

Dear brother, i have similar problem which happened after flashing custom rom on htc desire 310 dual sim. the phone cant detect any network and all sim slots reads null invalid imei also is prompting for SKU, CID. Please help.
victormm.uk said:
OK I've found solution to restore IMEI and SKU ,CID of this dead phone after one week
After many attempts my phone works ok without that error on screen about sku ,cid and without null imei now
For those with bricked htc d310w if help needed just pm and i will reply asap
Click to expand...
Click to collapse

Info
It is simple first write a fresh copy of stock rom 1.00.1136.5
Do not enter any google account but conect to wifi and update to 1.00.1136.7
Enable developer option then root with "rootdashi-cnet-k9zLZE.apk"
Open MTKdroidTools 2.5.3 and press root ; you must see on left down window of mtktools green and all aps like SU , Mobileuncle and RootExplorer installed in your phone
Disconnect baterry
Open SN_STATION v2.1344.02
When u start to write imei (after bouth imei inserted) push volume down to connect the preloder of phone when u see first 'ok ' meta is loaded then connect battery to reach Kernel stage push power and wait to see writing your phone should see phone boot only android image and restarting
Now if all good it will boot in android ,still that error will be on screen but when do *#06# u will have both imei on screen
Now type on pad #243# and u must see Swich Career ID ;chose what your career must be select 1.Quick Pick ; 2.Set ; 3.Backup to NVRam
Now phone is restarting and after reebot that error is gone and your phone have to work
i will send u an pm with app and some photos for help couse as new user i can't post direct links to my storage
Once u get #243# work it will work every time

Dear victormm,
Thank you very much as i solved problem with sku,cid and imei on htc by proper following steps and using tools which you sent me. I thank you so much currently i have just to say thank you very much and wish you happy xmas & new year.
Regards,
Godson.

Simple just press vol down and connect to pc
With maui meta tool its very easy no need to root
Easy and time saving

victormm.uk said:
It is simple first write a fresh copy of stock rom 1.00.1136.5
Do not enter any google account but conect to wifi and update to 1.00.1136.7
Enable developer option then root with "rootdashi-cnet-k9zLZE.apk"
Open MTKdroidTools 2.5.3 and press root ; you must see on left down window of mtktools green and all aps like SU , Mobileuncle and RootExplorer installed in your phone
Disconnect baterry
Open SN_STATION v2.1344.02
When u start to write imei (after bouth imei inserted) push volume down to connect the preloder of phone when u see first 'ok ' meta is loaded then connect battery to reach Kernel stage push power and wait to see writing your phone should see phone boot only android image and restarting
Now if all good it will boot in android ,still that error will be on screen but when do *#06# u will have both imei on screen
Now type on pad #243# and u must see Swich Career ID ;chose what your career must be select 1.Quick Pick ; 2.Set ; 3.Backup to NVRam
Now phone is restarting and after reebot that error is gone and your phone have to work
i will send u an pm with app and some photos for help couse as new user i can't post direct links to my storage
Once u get #243# work it will work every time
Click to expand...
Click to collapse
Senior Member477 posts Thanks: 16
HTC Desire 310 Single SIM Invalid IMEI cause CID is Incorrect
Dear brother based on this thread, i have similar problem which happened after factory reset on htc desire 310 single sim. the phone cant detect any network and the single sim slots reads null invalid imei also is prompting for SKU, CID. Please help me brother...

[Completed] acer e700 single sim help plz plz

Im in deep problem and im unable to solve
its about my acer liquid e39 and just to make it clear im a nood to the whole flashing of android
now wat happen i have a habit to always keeping the settings( unknown sources ) on
the the other day i download a antivirus for my phone named (e mobile security and antivirus) from a torrent site
it worked grate but then i realized the the licences expired from 2014 so i decided try and download a new one
well i was hoping i could fined one in which i did.
now after i downloaded it i placed it in (Android Data com.eset.ems2 ) folder
any way after doing so the antivirus keep tell me the the downloaded file was a molar so i ignore it and poof that wen the phone start acting up things starts to force close and the phone start to restart by it self i have tried
uninstall an remove the program
factory reset the pone and the virus was still there thats wen the idea to flash a different single sim stock ROM
not realizing i should have backed up the original ROM
ive download a stock rom from (xda) did 3 times yep 3 times and a triple sim stock ROM also
after using the sptool to flash on the stock rom
Firmware (Acer_AV0K0_E39_1.011.00_EMEA_GEN1S )when it was done i unplug the usb and turnd on the phone it took awhile then i saw the welcome screen i sow so glad to see it until i touched the screen trying to press next nothing happen
1. the touch was not working at all but it detect my sim card
i flash the phone 3 times and got the same problem
i open the sp flash tool to flash (Acer_AV0K0_E39_1.019.00_EMEA_CUS1)
Saw the welcome screen and the touch was working very well after finishing the set up the phone is telling me
2. Invalid imei
3. No sim card detected in slot 123
yet the card is in the phone and wen i remove the card the phone is saying( sim1 has been changed, the phone will restart immediately)
can someone plz help me fix the issues im having
:crying::crying::crying:

kaywana said:
Im in deep problem and im unable to solve
its about my acer liquid e39 and just to make it clear im a nood to the whole flashing of android
now wat happen i have a habit to always keeping the settings( unknown sources ) on
the the other day i download a antivirus for my phone named (e mobile security and antivirus) from a torrent site
it worked grate but then i realized the the licences expired from 2014 so i decided try and download a new one
well i was hoping i could fined one in which i did.
now after i downloaded it i placed it in (Android Data com.eset.ems2 ) folder
any way after doing so the antivirus keep tell me the the downloaded file was a molar so i ignore it and poof that wen the phone start acting up things starts to force close and the phone start to restart by it self i have tried
uninstall an remove the program
factory reset the pone and the virus was still there thats wen the idea to flash a different single sim stock ROM
not realizing i should have backed up the original ROM
ive download a stock rom from (xda) did 3 times yep 3 times and a triple sim stock ROM also
after using the sptool to flash on the stock rom
Firmware (Acer_AV0K0_E39_1.011.00_EMEA_GEN1S )when it was done i unplug the usb and turnd on the phone it took awhile then i saw the welcome screen i sow so glad to see it until i touched the screen trying to press next nothing happen
1. the touch was not working at all but it detect my sim card
i flash the phone 3 times and got the same problem
i open the sp flash tool to flash (Acer_AV0K0_E39_1.019.00_EMEA_CUS1)
Saw the welcome screen and the touch was working very well after finishing the set up the phone is telling me
2. Invalid imei
3. No sim card detected in slot 123
yet the card is in the phone and wen i remove the card the phone is saying( sim1 has been changed, the phone will restart immediately)
can someone plz help me fix the issues im having
:crying::crying::crying:
Click to expand...
Click to collapse
Greetings,
You have already received a response in your previous thread here:
http://forum.xda-developers.com/general/xda-assist/acre-e39-single-sim-help-t3340091
Please do not create a thread or post more than once.
Thread closed.

MATE 9 Unbrick Solution - All questions answered.

Hello friends,
first of all thanks to everyone who supported me to fix my phone.( took me nearly 2 days)
this thread is for the people who bricked their phone while re-branding etcetra and to recover it in easy steps.
First make a note of your IMEI, Product ID, Sno. before proceeding.
1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
https://drive.google.com/open?id=10fNOKja7MD0MOtlPVQH5S9kQ2czdn9dC
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded model number from this website https://www.gizrom.com/huawei-mate-9-stock-rom/
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
7.Follow the instructions. You will need your device unlocking code in order to unlock bootloader and install twrp. SO MAKE A NOTE OF YOUR UNLOCK CODE AND SAVE IT.
8.For those your are having trouble finding SNo. and Product id can check from this website or can use HUAWEI PRODUCT ID Generator.
https://imei24.com/warranty_info/Huawei/861956030103197/
9.Now, after following instructions your device will reboot and start factory reset, if it fails then don't worry just hold "power + Vol up " to boot into recovery wipe partition then wipe data (factory reset ) then reboot.
DONE!
10.For those who are having trouble with MEID showing 000000000 don't worry its just for MHA-L09(single sim) showing it as dual sim....but sim works absolutely perfect.
11.For those who want to install oreo they follow same above HWOTA procedure, download official oreo from
https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
That's it!!!!!
If you have any problem installing firmware, feel free to post in this thread, il try to reply asap..:good::good:
GOOD LUCK.

Shadymind said:
Hello friends,
first of all thanks to everyone who supported me to fix my phone.( took me nearly 2 days)
this thread is for the people who bricked their phone while re-branding etcetra and to recover it in easy steps.
First make a note of your IMEI, Product ID, Sno. before proceeding.
1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
https://drive.google.com/open?id=10fNOKja7MD0MOtlPVQH5S9kQ2czdn9dC
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded model number from this website https://www.gizrom.com/huawei-mate-9-stock-rom/
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
7.Follow the instructions. You will need your device unlocking code in order to unlock bootloader and install twrp. SO MAKE A NOTE OF YOUR UNLOCK CODE AND SAVE IT.
8.For those your are having trouble finding SNo. and Product id can check from this website or can use HUAWEI PRODUCT ID Generator.
https://imei24.com/warranty_info/Huawei/861956030103197/
9.Now, after following instructions your device will reboot and start factory reset, if it fails then don't worry just hold "power + Vol up " to boot into recovery wipe partition then wipe data (factory reset ) then reboot.
DONE!
10.For those who are having trouble with MEID showing 000000000 don't worry its just for MHA-L09(single sim) showing it as dual sim....but sim works absolutely perfect.
11.For those who want to install oreo they follow same above HWOTA procedure, download official oreo from
https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
That's it!!!!!
If you have any problem installing firmware, feel free to post in this thread, il try to reply asap..:good::good:
GOOD LUCK.
Click to expand...
Click to collapse
mate 9 mha l29 mha c185b188
I tried to update to oreu the hwota method every thing OK but when phone restart 14% then instillation field!!
the I tried Re-branding method same ( every thing complete ) when phone restart instillation field
the when restart phone say error redownload update again ... no image error n 2
how to recover stuck room!!!
plz help

Abody.sy said:
mate 9 mha l29 mha c185b188
I tried to update to oreu the hwota method every thing OK but when phone restart 14% then instillation field!!
the I tried Re-branding method same ( every thing complete ) when phone restart instillation field
the when restart phone say error redownload update again ... no image error n 2
how to recover stuck room!!!
plz help
Click to expand...
Click to collapse
Could you post an image of the error screen?

phone still not booting
Hi I followed all steps on your thread but when my phone booted up it says "software install failed" And everytime I boot up after that it takes me to Erecovery,I tried wiping cache partition and factory reset from recovery mode but the factory reset fails at 5%,what am I doing wrong? My phone has been like this for 3 weeks

prenesin said:
Hi I followed all steps on your thread but when my phone booted up it says "software install failed" And everytime I boot up after that it takes me to Erecovery,I tried wiping cache partition and factory reset from recovery mode but the factory reset fails at 5%,what am I doing wrong? My phone has been like this for 3 weeks
Click to expand...
Click to collapse
Is your FRP unlocked?
You can check by booting to fastboot mode.
Download minimal adb & fastboot installer. Install.
Put phone in fastboot mode by plugging in USB to computer and then start using power + vol down.
If it says FRP unlock its pretty easy to fix.
If not you could try factory reset from recovery, then back to fastboot mode and check if FRP is gone.
Check this and reply back.

frp unlock?
ante0 said:
Is your FRP unlocked?
You can check by booting to fastboot mode.
Download minimal adb & fastboot installer. Install.
Put phone in fastboot mode by plugging in USB to computer and then start using power + vol down.
If it says FRP unlock its pretty easy to fix.
If not you could try factory reset from recovery, then back to fastboot mode and check if FRP is gone.
Check this and reply back.
Click to expand...
Click to collapse
I don't know about frp unlock,I only know bootloader unlock,I press the volume down button while doing that I connect it to the pc,my phone displays "phone unlocked"is that the same as frp?

prenesin said:
I don't know about frp unlock,I only know bootloader unlock,I press the volume down button while doing that I connect it to the pc,my phone displays "phone unlocked"is that the same as frp?
Click to expand...
Click to collapse
If it just says that, and not FRP locked, you can use this guide to rebrand and/or get a working firmware.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I realise it's the same hwota as OP posted but it's explained a little more in the release thread.
Does the bat give any errors?

phone still not booting
ante0 said:
f it just says that, and not FRP locked, you can use this guide to rebrand and/or get a working firmware.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I realise it's the same hwota as OP posted but it's explained a little more in the release thread.
Does the bat give any errors?
Click to expand...
Click to collapse
The bat does not give me any errors, everything works as explained but once it's time for the phone to boot up it says software install failed,than it boots to Erecovery,I even did it twice first was rebrand than same model update but the phone still doesn't boot up

Phone finally booted up almost good as new
Shadymind said:
Hello friends,
first of all thanks to everyone who supported me to fix my phone.( took me nearly 2 days)
this thread is for the people who bricked their phone while re-branding etcetra and to recover it in easy steps.
First make a note of your IMEI, Product ID, Sno. before proceeding.
1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
https://drive.google.com/open?id=10fNOKja7MD0MOtlPVQH5S9kQ2czdn9dC
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded model number from this website https://www.gizrom.com/huawei-mate-9-stock-rom/
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
7.Follow the instructions. You will need your device unlocking code in order to unlock bootloader and install twrp. SO MAKE A NOTE OF YOUR UNLOCK CODE AND SAVE IT.
8.For those your are having trouble finding SNo. and Product id can check from this website or can use HUAWEI PRODUCT ID Generator.
https://imei24.com/warranty_info/Huawei/861956030103197/
9.Now, after following instructions your device will reboot and start factory reset, if it fails then don't worry just hold "power + Vol up " to boot into recovery wipe partition then wipe data (factory reset ) then reboot.
DONE!
10.For those who are having trouble with MEID showing 000000000 don't worry its just for MHA-L09(single sim) showing it as dual sim....but sim works absolutely perfect.
11.For those who want to install oreo they follow same above HWOTA procedure, download official oreo from
https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
That's it!!!!!
If you have any problem installing firmware, feel free to post in this thread, il try to reply asap..:good::good:
GOOD LUCK.
Click to expand...
Click to collapse
Thanks to this post my Huawei mate 9 is finally working, tried restoring it for the past 3 weeks but nothing, this was the only method that worked for me, everything on the phone works perfectly except that my single Sim Sim now says it's a dual Sim(MEID showing a lot of zeros) , but I'm just glad it's working after all this time, thank you to everyone who helped

Hi
Can you help me please ?
https://forum.xda-developers.com/mate-9/help/huawei-mate-9-mha-l09-mha-l29-t3738376
Thank you

Hi
Please can you tell to me why when HWOTA wait my phone in TWRP mode do not detect my phone ? Thank you

Please help
My mate 9 had a security patch dated in April last year. I was trying to update it to a recent patch. I tried a couple OTA passages on FF, but none of them could finish and left me with a starting screen saying your phone failed for verification. So I tried a full OTA package ( don't remember the number more, but it's a package dated Jan 7th I think) that passed the access test in FF.
The whole process finished and screen showed update successful. But all of a sudden, instead of normal restart, the phone started a downgrade process and tried to install B567 back to my phone. Then it kept going to erecovery, but always showed recovery failed after downloading a package from server and trying to install it.
I don't want to void any warranty, only trying to reset it back to original state. Please help.

Shadymind said:
Hello friends,
first of all thanks to everyone who supported me to fix my phone.( took me nearly 2 days)
this thread is for the people who bricked their phone while re-branding etcetra and to recover it in easy steps.
First make a note of your IMEI, Product ID, Sno. before proceeding.
1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
https://drive.google.com/open?id=10fNOKja7MD0MOtlPVQH5S9kQ2czdn9dC
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded model number from this website https://www.gizrom.com/huawei-mate-9-stock-rom/
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
7.Follow the instructions. You will need your device unlocking code in order to unlock bootloader and install twrp. SO MAKE A NOTE OF YOUR UNLOCK CODE AND SAVE IT.
8.For those your are having trouble finding SNo. and Product id can check from this website or can use HUAWEI PRODUCT ID Generator.
https://imei24.com/warranty_info/Huawei/861956030103197/
9.Now, after following instructions your device will reboot and start factory reset, if it fails then don't worry just hold "power + Vol up " to boot into recovery wipe partition then wipe data (factory reset ) then reboot.
DONE!
10.For those who are having trouble with MEID showing 000000000 don't worry its just for MHA-L09(single sim) showing it as dual sim....but sim works absolutely perfect.
11.For those who want to install oreo they follow same above HWOTA procedure, download official oreo from
https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
That's it!!!!!
If you have any problem installing firmware, feel free to post in this thread, il try to reply asap..:good::good:
GOOD LUCK.
Click to expand...
Click to collapse
hi thank you for the simplified process my question is i have the unlock code but no oem unlock permission and i am unable to move any further is there any solution for it or i am mistaking somewhere

Abody.sy said:
mate 9 mha l29 mha c185b188
I tried to update to oreu the hwota method every thing OK but when phone restart 14% then instillation field!!
the I tried Re-branding method same ( every thing complete ) when phone restart instillation field
the when restart phone say error redownload update again ... no image error n 2
how to recover stuck room!!!
plz help
Click to expand...
Click to collapse
Hi
Have you check the oem info which you had flashed using HWOTA?
Flash the correct oem info for your device and follow instructions in case if it failed again post screenshot of the error.

awais_666 said:
hi thank you for the simplified process my question is i have the unlock code but no oem unlock permission and i am unable to move any further is there any solution for it or i am mistaking somewhere
Click to expand...
Click to collapse
Hi
Apology for late reply, if you got the unlock code try unlocking bootloader using hwota, and continue the process
BUT before proceeding make sure you noted correct unlock code,double check your imei, sno etc if something missing in your unlock code.

Shadymind said:
Hi
Apology for late reply, if you got the unlock code try unlocking bootloader using hwota, and continue the process
BUT before proceeding make sure you noted correct unlock code,double check your imei, sno etc if something missing in your unlock code.
Click to expand...
Click to collapse
no worries dear really appreciate that you are trying to help when i use HWOTA first thing it asks to unlock put the code i have the right code but when i try it using HWOTA it doesnt flash as normally we go to usb debugging and enable it and also click oem unlock to allow device to be unlocked those options are not enabled that is why i cant unlock bootloader

awais_666 said:
no worries dear really appreciate that you are trying to help when i use HWOTA first thing it asks to unlock put the code i have the right code but when i try it using HWOTA it doesnt flash as normally we go to usb debugging and enable it and also click oem unlock to allow device to be unlocked those options are not enabled that is why i cant unlock bootloader
Click to expand...
Click to collapse
Hi,
If it is giving incorrect unlock code then confirm your imei, product id, serial number, get the unlock code from huawei developer page and save it as notepad and try again with hwota....check imei on product box , for some reason after rebranding device gives you some different imei.

Shadymind said:
Hi,
If it is giving incorrect unlock code then confirm your imei, product id, serial number, get the unlock code from huawei developer page and save it as notepad and try again with hwota....check imei on product box , for some reason after rebranding device gives you some different imei.
Click to expand...
Click to collapse
the code is not incorrect and HWOTA doesnt say its incorrect it gets failed to write which is normal for every phone if they dont have it oem unlock enabled from developer options unless there is any other way around

needing file location clarification
QUOTE: 1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
* I have downloaded ant unzipped HWOTA on pc desktop
* I have downloaded the 3 additional zip files as well.
Do these files go directly into the unzipped HWOTA folder? (you mention UPDATE folder?)
* Do these 3 files stay zipped?
* It doesn't seem to allow me to change the file names
* where is the "update.bat" file to open?
Thank you so very much

Shadymind said:
Hi
Have you check the oem info which you had flashed using HWOTA?
Flash the correct oem info for your device and follow instructions in case if it failed again post screenshot of the error.
Click to expand...
Click to collapse
İ sended the phone to phone engineering shope
the thone successfully start by unknown way for my...
but it installed NRD90M KEYS TEST build nu. android version 7
and some of functions doesn't work
like file manager and theme and Bluetooth...
how to reinstall full room??