Database Info

My device never worked after installing A ROM!!

hi every one..
yesterday i downloaded the newest rom from htc which support ARABIC..
here is my steps:
1-I downloaded it,
2-extracted RUU***.nbh which size 220 MB,
3-changed the name of the file to KAISIMG.nbh
4-copied to the SD card
5-restarted in bootloader for installation
6-started progress until it reached radio or somthing
7-hanged for 10 miniutes at the same rate whith no changing in progress
8-restarted the phone
9-the device officially dead
I tried to remove the device`s battrey for 1 day,,but still nothing
PLZ HELP ME,, WHAT CAN I DO WITH IT BESIDE THOWING IT,OFCOURS ??

I have no idea about kaiser, but try get into bootloader (Hold Camera + Power buttons together and reset with stylus-Ithink) if you can then transfer another normal working rom to the sd and flash it. If you cant get it into bootloader then i think we can call it officially dead? Maybe if you search kaiser forum, there must be someone else whos had the same problem and look if they fixed it.

the problem is the device not working.. not even a power to lite the screen like if it was without a battry,, after all thanx for ur try

HTC D310w bricked and restore SKU ;CID ;IMEI

OK I've found solution to restore IMEI and SKU ,CID of this dead phone after one week
After many attempts my phone works ok without that error on screen about sku ,cid and without null imei now
For those with bricked htc d310w if help needed just pm and i will reply asap

Dear brother, i have similar problem which happened after flashing custom rom on htc desire 310 dual sim. the phone cant detect any network and all sim slots reads null invalid imei also is prompting for SKU, CID. Please help.
victormm.uk said:
OK I've found solution to restore IMEI and SKU ,CID of this dead phone after one week
After many attempts my phone works ok without that error on screen about sku ,cid and without null imei now
For those with bricked htc d310w if help needed just pm and i will reply asap
Click to expand...
Click to collapse

Info
It is simple first write a fresh copy of stock rom 1.00.1136.5
Do not enter any google account but conect to wifi and update to 1.00.1136.7
Enable developer option then root with "rootdashi-cnet-k9zLZE.apk"
Open MTKdroidTools 2.5.3 and press root ; you must see on left down window of mtktools green and all aps like SU , Mobileuncle and RootExplorer installed in your phone
Disconnect baterry
Open SN_STATION v2.1344.02
When u start to write imei (after bouth imei inserted) push volume down to connect the preloder of phone when u see first 'ok ' meta is loaded then connect battery to reach Kernel stage push power and wait to see writing your phone should see phone boot only android image and restarting
Now if all good it will boot in android ,still that error will be on screen but when do *#06# u will have both imei on screen
Now type on pad #243# and u must see Swich Career ID ;chose what your career must be select 1.Quick Pick ; 2.Set ; 3.Backup to NVRam
Now phone is restarting and after reebot that error is gone and your phone have to work
i will send u an pm with app and some photos for help couse as new user i can't post direct links to my storage
Once u get #243# work it will work every time

Dear victormm,
Thank you very much as i solved problem with sku,cid and imei on htc by proper following steps and using tools which you sent me. I thank you so much currently i have just to say thank you very much and wish you happy xmas & new year.
Regards,
Godson.

Simple just press vol down and connect to pc
With maui meta tool its very easy no need to root
Easy and time saving

victormm.uk said:
It is simple first write a fresh copy of stock rom 1.00.1136.5
Do not enter any google account but conect to wifi and update to 1.00.1136.7
Enable developer option then root with "rootdashi-cnet-k9zLZE.apk"
Open MTKdroidTools 2.5.3 and press root ; you must see on left down window of mtktools green and all aps like SU , Mobileuncle and RootExplorer installed in your phone
Disconnect baterry
Open SN_STATION v2.1344.02
When u start to write imei (after bouth imei inserted) push volume down to connect the preloder of phone when u see first 'ok ' meta is loaded then connect battery to reach Kernel stage push power and wait to see writing your phone should see phone boot only android image and restarting
Now if all good it will boot in android ,still that error will be on screen but when do *#06# u will have both imei on screen
Now type on pad #243# and u must see Swich Career ID ;chose what your career must be select 1.Quick Pick ; 2.Set ; 3.Backup to NVRam
Now phone is restarting and after reebot that error is gone and your phone have to work
i will send u an pm with app and some photos for help couse as new user i can't post direct links to my storage
Once u get #243# work it will work every time
Click to expand...
Click to collapse
Senior Member477 posts Thanks: 16
HTC Desire 310 Single SIM Invalid IMEI cause CID is Incorrect
Dear brother based on this thread, i have similar problem which happened after factory reset on htc desire 310 single sim. the phone cant detect any network and the single sim slots reads null invalid imei also is prompting for SKU, CID. Please help me brother...

[Completed] sony xperia sp bricked and need help im at a lost end :(

Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris

chris10286 said:
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
Click to expand...
Click to collapse
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread

chris10286 said:
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
Click to expand...
Click to collapse
Glad you managed to fix it yourself.
If you have further questions, feel free to ask in the help thread for the Xperia SP
http://forum.xda-developers.com/xperia-sp/help
Thread closed.

Need help !! Phone Automatically switches off

Last week i rooted my micromax a106 (Android Kitkat) with king root and later on replaced it with SU app
I was on stock rom only and didnt flash any roms. I wanted to try system partition for my phone to increase app storage.
So before that i flash CWM , took backup and tried to take imei and nvamp backup but failed to so.
Mobile uncle tools was not taking imei backup and showing sd card not found. I found another post for taking backup from pc by using mtk tools software and i tried that method but my phone was not detecting.
So I decided i wont go forward without taking these backups and flash a non rooted stock rom .
After that problem started. My phone used to switch off 4-5 times in a day and wont start quickly, like after automatically switching off i have to reinsert battery only then it will start again. My SD card used to unmount itself and wont get mounted again unless i did a restart (formatting my SD card also didnt help)
Then i found a post for installing software from pc using sp flash tools and used his stock rom file (provided in his post)
I did as it was said and successfully installed it.
I used it for 2 days everything was fine , had no issue of SD card this time (also formatted it again just to be on a safer side). But later on my phone switched off again . But this time was like only once or twice a day (based on two days usage)
Currently i have installed Stock Rom V1 (Kitkat) of Micromax A106 (obviously with stock recovery)
UPDATE : today sd card problem also started . Phone gets freezed randomly and then switches off . Have to reinsert battery to get it woking again
Please help what should i do to solve this issue

My micromax unite 2 swith off automatically some times and again used it by restarting.One day it happens again but cant switched on what is the reason my mail id [email protected]

[Completed] acre e39 single sim help

Im in deep problem and im unable to solve
its about my acer liquid e39 and just to make it clear im a nood to the whole flashing of android
now wat happen i have a habit to always keeping the settings( unknown sources ) on
the the other day i download a antivirus for my phone named (e mobile security and antivirus) from a torrent site
it worked grate but then i realized the the licences expired from 2014 so i decided try and download a new one
well i was hoping i could fined one in which i did.
now after i downloaded it i placed it in (Android Data com.eset.ems2 ) folder
any way after doing so the antivirus keep tell me the the downloaded file was a molar so i ignore it and poof that wen the phone start acting up things starts to force close and the phone start to restart by it self i have tried
uninstall an remove the program
factory reset the pone and the virus was still there thats wen the idea to flash a different single sim stock ROM
not realizing i should have backed up the original ROM
ive download a stock rom from (xda) did 3 times yep 3 times and a triple sim stock ROM also
after using the sptool to flash on the stock rom
Firmware (Acer_AV0K0_E39_1.011.00_EMEA_GEN1S )when it was done i unplug the usb and turnd on the phone it took awhile then i saw the welcome screen i sow so glad to see it :good: until i touched the screen trying to press next nothing happen
1. the touch was not working at all but it detect my sim card
i flash the phone 3 times and got the same problem
i open the sp flash tool to flash (Acer_AV0K0_E39_1.019.00_EMEA_CUS1)
Saw the welcome screen and the touch was working very well after finishing the set up the phone is telling me
2. Invalid imei
3. No sim card detected in slot 123
yet the card is in the phone and wen i remove the card the phone is saying( sim1 has been changed, the phone will restart immediately)
can someone plz help me fix the issues im having:crying::crying::crying:

Hello and thank you for using XDA Assist,
please create a thread here:
Android Q&A, Help & Troubleshooting
I hope there will be someone, who is able to help you.
Kind regards
Trafalgar Square
XDA Assist