Database Info

[Q] explorer recovery

hi
i have unlocked the phones boot loader and uploaded the recovery file to the phone, however i cant go in to recovery mode, i have selected recovery from the boot menu but the phone just boots normally
everything else has completed with out error, not sure what to do now to get the phone rooted so i can sort my space issue out.
mark

Read the rooting tutorial again. Then you'll answer yourself what's wrong
Sent from my HTC Explorer A310e using xda app-developers app

shortyoko said:
Read the rooting tutorial again. Then you'll answer yourself what's wrong
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Give me a clue please

ful56 said:
Give me a clue please
Click to expand...
Click to collapse
Ok so my bat file doesn't have this
fastboot flash boot boot.img
But does have this
fastboot flash recovery recovery.img
Do I need the boot.img line in the bat file?

ful56 said:
Ok so my bat file doesn't have this
fastboot flash boot boot.img
But does have this
fastboot flash recovery recovery.img
Do I need the boot.img line in the bat file?
Click to expand...
Click to collapse
hi
read the below link for CWM u can just flash it via the PC but u need to have the HTC drivers on ur PC and go to fastbootUSB mode and click on the bat file and u will have the CWM
link : http://forum.xda-developers.com/showthread.php?t=1415223

haree said:
hi
read the below link for CWM u can just flash it via the PC but u need to have the HTC drivers on ur PC and go to fastbootUSB mode and click on the bat file and u will have the CWM
link : http://forum.xda-developers.com/showthread.php?t=1415223
Click to expand...
Click to collapse
Hello
That's the guide i followed, I run the bat file put it into fast USB mode. It copies the file and I see a small progress bar on the hand set then it says completed successfully. When I try to put it into recovery it just boots as normal and yes I am highlighting the recovery bit in the menu the hitting the power button to select it.

put phone into fastboot mode (you know how already)
use adb command:
Code:
fastboot flash recovery recovery.img
once successfully sent to phone, shut down phone then try again to access recovery (hold vol - and press power button once, scroll down to recovery) hope it helps

ful56 said:
hi
i have unlocked the phones boot loader and uploaded the recovery file to the phone, however i cant go in to recovery mode, i have selected recovery from the boot menu but the phone just boots normally
everything else has completed with out error, not sure what to do now to get the phone rooted so i can sort my space issue out.
Click to expand...
Click to collapse
If you're having difficulty flashing recovery, you can easily do it with ROM Manager.
All you've to do is downloading ROM Manager from Play Store, open it and choose Flash ClockworkMod Recovery, follow the steps, wait and you're done. PS, your phone must be rooted before using ROM Manager. It will flash latest version CWM Recovery available for your device.
Please hit 'Thanks' if I helped you.
*Modify*
Sorry I read it later that your phone is not rooted yet. So you can first install superuser.apk by flashing superuser.zip from inbuilt recovery(you'll find the way in rooting tutorial) and then follow the above mentioned steps.

developerindeed said:
If you're having difficulty flashing recovery, you can easily do it with ROM Manager.
All you've to do is downloading ROM Manager from Play Store, open it and choose Flash ClockworkMod Recovery, follow the steps, wait and you're done. PS, your phone must be rooted before using ROM Manager. It will flash latest version CWM Recovery available for your device.
Please hit 'Thanks' if I helped you.
*Modify*
Sorry I read it later that your phone is not rooted yet. So you can first install superuser.apk by flashing superuser.zip from inbuilt recovery(you'll find the way in rooting tutorial) and then follow the above mentioned steps.
Click to expand...
Click to collapse
I reckon there is a problem with the recovery on the phone as once i have selected recovery on the boot loader the phone boots normally, unless is is a key combination i need to press while it is trying to boot into recovery, i dunno

ful56 said:
I reckon there is a problem with the recovery on the phone as once i have selected recovery on the boot loader the phone boots normally, unless is is a key combination i need to press while it is trying to boot into recovery, i dunno
Click to expand...
Click to collapse
If your using a sense ROM, it doesn't fully shut down on power off. You have to take out the battery and put it back in before holding power and volume down to boot into recovery. If you can't get into the recovery, reflash it.
Sent from my HTC Explorer A310e using xda app-developers app

nachiketa.ramesh said:
If your using a sense ROM, it doesn't fully shut down on power off. You have to take out the battery and put it back in before holding power and volume down to boot into recovery. If you can't get into the recovery, reflash it.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Thanks
I reckon it needs a reflash then, is there a guide for this?

ful56 said:
I reckon there is a problem with the recovery on the phone as once i have selected recovery on the boot loader the phone boots normally, unless is is a key combination i need to press while it is trying to boot into recovery, i dunno
Click to expand...
Click to collapse
This was the method given in the rooting tutorial:
After unlocking bootloader,
Copy SuperUser.Zip file into SD-Card and then turn OFF your HTC Explorer (Take Out Your Battery > Place it Again). Then Press & Hold Volume DOWN + Power key to get into Bootloader.
Then Select Fastboot with Vol Keys and Press Power Key > When You are in fastboot connect your HTC Explorer to PC Via USB Cable
Extract Recovery.zip file anywhere on your pc and run the Recovery.bat file, wait a moment and you are done.
Now, after running the Recovery.bat file and successfully completing the above step press Power Key to get back into Bootloader:
Using Vol Keys > Select Recovery,
Wait until this Recovery screen is shown (It Could be in blue colour or any other colour):
Using Vol Keys Select Install zip from sdcard and Press Power Key > Then Choose Zip From SD-card and Press Power Key and finally select the Superuser.zip file using Vol Keys and Press Power Key.
And when it shows Install complete or something, you've successfully rooted your device.
From above method you've managed to install a temp. recovery from that recovery.bat but you need a recovery you can access without connecting it to PC but with bootloader.
After it, reboot back. Install application ROM Manager from Play Store. Open it when installed, grant superuser permission(just select yes when a pop-up appears. It asks root permission). Now follow the steps I told you before. You can do rest of the things easily.
However you can install a custom ROM(upgrade your android version) only by unlocking bootloader and flashing recovery. But as your warranty is already void now, root your phone and enjoy all features around.
Like you can install link2sd from Play Store. It can forcefully move any app to sd-card. So your memory problem is out.
Yes, now don't forget to hit 'Thanks' or you would not succeed.

[Q] Help!!! Flashed the wrong rom on my tablet

(new member)
I was flashing rom for sm t310 instead of smt311.The error came up when i flashed the rom.After i rebooted my devie its stuck on the logo screen.I tried wipe data and factory reset but nothing helped.
I tried to restore but it failed
But i can still go to recovery and download mode.Whenever i reboot or switch off my tablet it asks if i want to root.Is there any solution to fix my tablet?Thanks!

Luin081 said:
(new member)
I was flashing rom for sm t310 instead of smt311.The error came up when i flashed the rom.After i rebooted my devie its stuck on the logo screen.I tried wipe data and factory reset but nothing helped.
I tried to restore but it failed
But i can still go to recovery and download mode.Whenever i reboot or switch off my tablet it asks if i want to root.Is there any solution to fix my tablet?Thanks!
Click to expand...
Click to collapse
flash rom for your device, its simply

Paget96 said:
flash rom for your device, its simply
Click to expand...
Click to collapse
should i flash my current rom? and is therany way my tablet can be fixed?Thanks

Luin081 said:
should i flash my current rom? and is therany way my tablet can be fixed?Thanks
Click to expand...
Click to collapse
no, only if you backup rom with recovery...

Paget96 said:
no, only if you backup rom with recovery...
Click to expand...
Click to collapse
how should i flash my rom?

Luin081 said:
how should i flash my rom?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/3/?download=31090
sign up here, this is an official samsung page for firmwares,etc.
when download ROM follow this:
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes

Thanks!!
Hope this will work

everytime i switch off/reboot my device through twrp it says that your device does not appear to be rooted,install super su now?
if i press install it will just reboot back to the logo screen.
Is there anything i should do?

Thank you very much!!
Now my tablet is back to normal again.
Many thanks!!

[Guide][How to Root Lollipop GT-I9500/i9505][5.0.1]

This guide will show you how to root Lollipop 5.0.1 for the GT-I9500/i9505 ONLY!
With NOOBS support
Method 1 (GT-I9500)
Steps:
1 - Download cf-auto-root: Click Me
2 - Connect your phone to pc
3 - Open odin
4 - Go to download mode by holding the volume down + home key+ power key at the same time, then press volume up
5 - Extract and Flash the file via odin (AP or PDA)
Method 2 (GT-I9500/GT-I9505)
Steps:
1 - Download philz touch recovery GT-I9500 : pCloud Dropbox
Download philz touch recovery GT-I9505 : pCloud Dropbox
or Download CWM recovery: Click Me
2 - Connect your phone to pc
3 - Open odin
4 - Go to download mode by holding the volume down + home key+ power key at the same time, then press volume up
5 - Flash the recovery via odin (AP or PDA) (if you are on i9505 uncheck auto-reboot)
- After the device reboots
6 - Download the SuperSU or Dropbox
7 - Go to the recovery by holding the volume up + home key + power key at the same time
8- Flash the SuperSU file from recovery (Select "Install zip") and locate the file
9 - Reboot.
Method 3 (GT-I9500)
Steps:
1 - Download philz touch recovery GT-I9500 : Click Me
2 - Connect your phone to pc
3 - Open odin
4 - Go to download mode by holding the volume down + home key+ power key at the same time, then press volume up
5 - Flash the recovery via odin (AP or PDA)
- After the device reboots
6 - Go to the recovery by holding the volume up + home key + power key at the same time
7 - Now go to Philz settings --> Re-root System --> Yes Apply SuperSU
8 - Download SuperSU from Play Store
9 - Open the SuperSU and he should ask you, how do you want to update binary? select NORMAL
Have Fun.
If you dont get philz touch recovery on both i9500 & i9505 then flash the cf-auto-root and follow the steps.
cf-auto-root gt-i9500: Download
cf-auto-root gt-i9505: Download
cf-auto-root credits for method 1 goes to @Chainfire
Your Warranty will be voided!
im not responsible about any soft or hard brick or your phone!
MENTION ME IF YOU USE ANY OF MY LINKS!!
Receive OTA again and keep your data : http://forum.xda-developers.com/galaxy-s4/general/guide-t3024497

Wonderful! Does anyone know if how compatible xposed modules are with the new update?

Giorgios1 said:
Wonderful! Does anyone know if how compatible xposed modules are with the new update?
Click to expand...
Click to collapse
Xposed is incompatible with the ART runtime. That means it won't work on Lollipop.

This thread doesn't belong in Original development,not even in Android development.
Moved to General section.

my experience:
installation failed ----> reboot ----> stuck at samsung logo

Rando81 said:
my experience:
installation failed ----> reboot ----> stuck at samsung logo
Click to expand...
Click to collapse
Exactly the same happened to me .... !!!!

samsung bootloop
i followed all the steps here and my phone got stuck on boot logo.
didnt have enough time to find a proper solution except doing a factory reset delete and cache delete.
didnt work out for me so i flashed the rom again and now it's working.
is there any other way to root my device without any bootloops?

@Rando81 @davie088 @username0101
it works fine with me, but...
try going to a higher version with the recovery
or ill find a another way to root after some tries

Thank u bro...

mdimrankhangr said:
Thank u bro...
Click to expand...
Click to collapse
anytime man!

Azar_98 said:
i followed your method and it kinda worked. installed recovery, system re root. installed supersu from play and it asked me to update binary. i accepted but it failed to update for some reason and asked me to reboot. i clicked reboot and got stuck at bootloop. i tried clearing dalvik and wipe data from recovery, still bootloop. so i guess it tried to modify a system file which did it wrongly and caused it to fail. either the binary isnt compatible with this rom, although it was compatible with chinese aurora 5.0.1. for now, im back to aurora. has anyone had any success rooting this? ill try tomorrow morning again. thanks
Click to expand...
Click to collapse
i dont know bro, it worked for me and some of members as well!
im trying some methods but i cant confirm that it will work with all of you, but try flashing this with odin download
tell me if you rooted your phone!

same problem
tell us if it worked for u

For all that couldn't succeed with the original SuperSU, use this one
Flash from recovery.
Worked for me.

Had the same problem, this is how I fixed!
I followed the instructions in OP, but was stuck in boot animation.
This is what I did to finally get root.
1. Flash CF-Autoroot through ODIN.
2. It should boot, but the SuperSu app is really outdated.
3. Update SuperSu.
4. It should ask you to update the binary.
5. Try updating through the Normal method.
6. For me it failed, and the app told me to reboot and retry.
7. I rebooted the phone, but the phone was stuck in boot animation (just like with the instructions in OP).
8. (Without wiping anything) I flashed Philz Touch recovery through Odin.
9. I downloaded SuperSu app that is flashable through recovery.
10. Rebooted and finally got root!

wta
Millenium3 said:
I followed the instructions in OP, but was stuck in boot animation.
This is what I did to finally get root.
1. Flash CF-Autoroot through ODIN.
2. It should boot, but the SuperSu app is really outdated.
3. Update SuperSu.
4. It should ask you to update the binary.
5. Try updating through the Normal method.
6. For me it failed, and the app told me to reboot and retry.
7. I rebooted the phone, but the phone was stuck in boot animation (just like with the instructions in OP).
8. (Without wiping anything) I flashed Philz Touch recovery through Odin.
9. I downloaded SuperSu app that is flashable through recovery.
10. Rebooted and finally got root!
Click to expand...
Click to collapse
are u keep the zip. file (update superSU v2.45) in the sd card n then install it with philz touch recovery ??

Woking Steps!!
Steps confirmed working:
1. Download and place superSU app into internal or external memory , from http://download.chainfire.eu/695/SuperSU/UPDATE-SuperSU-v2.45.zip
2.Flashed Philz Touch recovery through Odin. from https://my.pcloud.com/publink/show?code=XZs3BkZPWCE8hherxXnBPFJJc7ubQdC3Fv7
3. Boot into recovery, by 3-button combo .
4. Flash superSU app through recovery.
Done !! rooted
Hit Thanks if usefull

i am seeing a lot of ways guys. which way to root is working?

Try the methods above
If not the method 1 then try method 2

anuraagkochar said:
i am seeing a lot of ways guys. which way to root is working?
Click to expand...
Click to collapse
My question to
Sent from my GT-I9500 using XDA Free mobile app

RubbaBand said:
Try the methods above
If not the method 1 then try method 2
Click to expand...
Click to collapse
which above method? there are a lot

My mate 7 is bricked! PLease HELP!!

Hello! Unfortunately my mate 7 is bricked! The only thing i can do is to get in bootload mode. I can't get into recovery mode. I also cant install a rom by pressing volume up + volume down + power. Nothing is happening. Only rebooting with the huawei logo.
I try this solutions :
http://www.needrom.com/download/mt7-l09-unbrick-firmware/ and this
http://forum.frandroid.com/topic/215484-unbrick-mate-7-mt7-l09/
but this no success. PLease help me. :crying:

more info. what were you doing that caused the bl? what are you currently running? do you wish to repair or clean install?

droidbot1337 said:
more info. what were you doing that caused the bl? what are you currently running? do you wish to repair or clean install?
Click to expand...
Click to collapse
I do this by trying install the new B511 firmware. I download the update.zip file and I unzip it and try to install the UPDATE.APP I found into the zip file. After that the phone always show the Huawei logo and I can't closed it. The only think I can do is to put it into bootloader mode. I try to boot through fastboot from my pc the SYSTEM.img and RECOVERY.img using a official firmware and the HuaweiUpdateExtractor, but without success. And the 3 button way (Volume up + Volume down + power) not working anymore. And also I can't get in recovery mode. I try with official recovery and with twrp recovey

gthebest said:
hello! Unfortunately my mate 7 is bricked! The only thing i can do is to get in bootload mode. I can't get into recovery mode. I also cant install a rom by pressing volume up + volume down + power. Nothing is happening. Only rebooting with the huawei logo.
I try this solutions :
http://www.needrom.com/download/mt7-l09-unbrick-firmware/ and this
http://forum.frandroid.com/topic/215484-unbrick-mate-7-mt7-l09/
but this no success. Please help me. :crying:
Click to expand...
Click to collapse
which rom firmware version you were in when you try to install 511

mpt123 said:
which rom firmware version you were in when you try to install 511
Click to expand...
Click to collapse
Β326

gthebest said:
Β326
Click to expand...
Click to collapse
i dunno how to flash MM but i think i can help you back to LP. make sure you have stock recovery for LP. if you dont just download mobopx's tool. im currently using B328, so just extract the archive and place the dload folder in either your root or an sdcard. turn off phone, hold volume up & power. hope this helps. btw, installing MM requires more steps including an update to the stock recovery.

If you have already unlock your bootloader you can try 'one-key recovery' method with HiSuite version 4.0 (download it from the official chinese website) this method will restore and flash your ROM and your phone will be OK

smich_ayane said:
If you have already unlock your bootloader you can try 'one-key recovery' method with HiSuite version 4.0 (download it from the official chinese website) this method will restore and flash your ROM and your phone will be OK
Click to expand...
Click to collapse
Please can you send me a link to download it? I make a search at google "HiSuite version 4.0" but I can't find anything

droidbot1337 said:
i dunno how to flash MM but i think i can help you back to LP. make sure you have stock recovery for LP. if you dont just download mobopx's tool. im currently using B328, so just extract the archive and place the dload folder in either your root or an sdcard. turn off phone, hold volume up & power. hope this helps. btw, installing MM requires more steps including an update to the stock recovery.
Click to expand...
Click to collapse
This link don't working

gthebest said:
I do this by trying install the new B511 firmware. I download the update.zip file and I unzip it and try to install the UPDATE.APP I found into the zip file. After that the phone always show the Huawei logo and I can't closed it. The only think I can do is to put it into bootloader mode. I try to boot through fastboot from my pc the SYSTEM.img and RECOVERY.img using a official firmware and the HuaweiUpdateExtractor, but without success. And the 3 button way (Volume up + Volume down + power) not working anymore. And also I can't get in recovery mode. I try with official recovery and with twrp recovey
Click to expand...
Click to collapse
Hi i'm getting the same problem, i tried to update to mm but now i can only access the recovery with vol up and power occasionally. the vol up and down and power doesn't seem to be working for me. as this is my daily driver id appreciate some assistance thanks

gthebest said:
This link don't working
Click to expand...
Click to collapse
sorry about that. here's the link.
mega:///#!llQWQD6S!a0JOjS1ZmCT1aSggvCPYb7lhkPimYtVhja-Mv0qk7DY

Hisuite 4.0 here's hisuite 4.0 hope this will help you

gthebest said:
This link don't working
Click to expand...
Click to collapse
http://download-c.huawei.com/download/downloadCenter?downloadId=69004&version=239974&siteCode=cn

droidbot1337 said:
sorry about that. here's the link.
mega:///#!llQWQD6S!a0JOjS1ZmCT1aSggvCPYb7lhkPimYtVhja-Mv0qk7DY
Click to expand...
Click to collapse
I did the same mistake. I have Access to recovery mode, install mode and so on but everytime I try to install another Rom it stucks at 5% and I get a failure message.
and how can I open your mega link ?

hello my friend.
I am in the same situation as you , try installing mm and the phone went on bootloop and there did not come out , I've tried everything but nothing updates, the EMUI reaches 5% and then says the software install failed, if you given solution to your problem you ask for help in trying to solve this problem.
I thank you in advance.

[Root] [Recovery} Samsung Galaxy J7 Prime through CWM [SM-G610F] [SM-G610M]

Installing CWM Recovery + Rooting Samsung Galaxy J7 prime ( SM-G610F/SM-G610M )
Tested & Working​Know Issue
SDCARD & EXTSDCARD not mounting in CWM ( Not being able to flash/install ZIPs )
Fix​I suggest you to Install zip using sideload, here's a step by step guide :
First boot up your phone into CWM recovery
Go to Install zip update package and select Install zip from sideload
Now connect your android device to your computer
Download this and extract it.
Open command prompt in the ADB folder (mfastboot-v2 folder) by right clicking in the empty space of the folder while holding the Shift key.
Copy the Zip file you want to install on your device to the ADB folder, for example Xposed.zip.
Run the following command to sideload zip to your phone : adb sideload <filename.Zip>
Example adb sideload Xposed.zip
Voila! That's how you can flash Zip files​
First Part: Installing CWM Recovery​
NOTE BEFORE
Please make sure to follow the guide carefully and thoroughly as i won't be responsible for any damages caused to your device and also keep in mind that rooting your phone will automatically void your warranty.
MUST READ
Before you start, please note that this root has only been tested on the SM-G610F and SM-G610M variants of the Samsung Galaxy J7 prime, so kindly check your phone's variant before proceeding.(Check the back of your device)
Required Files:
CWM & ROOT
Samsung USB Driver
ADB USB Driver
How to install CWM Recovery
After downloading the required files make sure your system has an active Samsung USB Driver or you can simply download it from here
Also don't forget to Enable USB Debugging & Unlock OEM, this can be done by going to Developer Options and make sure to have these 2 boxes checked.
Then go to Lockscreen and Security under Settings and enable Unknown Sources.
With these done we are ready to kick-off!
Step by Step Instructions
STEP 1 : Connect your phone to your computer & Allow access to your device when the MTP Connection box pops up
STEP 2 : Now go to the ROOT J7 PRIME(2016) folder ( you will need to extract the rar file) you just downloaded and run 1-EnterDownloadMode.bat
STEP 3 : Wait for the phone to reboot into Download Mode ( If nothing happens after running 1-EnterDownloadMode.bat then you might need to disconnect and reconnect your USB cable and Allow USB Debugging (Check Always allow from this computer) when it prompts you. With this done, your device should automatically reboot into Downloading Mode.
STEP 4 : In Downloading Mode Run Odinv3.10.7.exe (Found in ROOT J7 PRIME(2016) folder) and click on AP and open
SM-G610_cwm.tar from ROOT J7 PRIME(2016) folder
After this go to Options in Odinv3.10.7.exe and uncheck both Auto Reboot & F Reset Time and finally click on start to execute the installation of CWM recovery. Wait for it to finish (When it says 'PASS!') and after that press and hold the Volume Down, Power and Home Button together ( To get out of download Mode ) and when you see the phone gets rebooted press and hold Volume Up, Power button and Home button to boot into CWM Recovery
STEP 5 : Enjoy! You now have CWM recovery installed
Second Part: Installing SuperSU
MUST READ
Use Volume buttons and power button in CWM Recovery to navigate through and select the different options.
How to Root
STEP 1 : In CWM Recovery, go to install zip package and then select install zip from sideload.
At this point you will have to connect your device to your computer and once done run ROOT.bat from ROOT J7 PRIME(2016) folder and wait for it to finish.
STEP 2 : Now run 3-Reboot.bat from ROOT J7 PRIME(2016) folder and you should see your phone get rebooted.
STEP 3 : Enjoy! You have just rooted your phone!
If you want to flash the stock recovery just repeat the steps for installing CWM but select SM-G610F_stock_recovery.tar or
SM-G610M_stock_recovery.tar instead of SM-G610_cwm.tar
P.S You now have a voided warranty
Cheers!​

Just FYI before you catch flak from a mod, the work you are linking, the adfly shortened links are a no go on xda.

ShinySide said:
Just FYI before you catch flak from a mod, the work you are linking, the adfly shortened links are a no go on xda.
Click to expand...
Click to collapse
rlly?

Oh ok since it is against the rules i'll kindly remove them
Thanks for letting me know btw

Thanks a lot,but flashing supersu from cwm without running .bat wouldn't work?my pc is in repair i can only use the pc on my work office and i dont have admin privilege,cmd is disabled and i doubt .bat would work i only can install odin

fakih.m7md said:
Thanks a lot,but flashing supersu from cwm without running .bat wouldn't work?my pc is in repair i can only use the pc on my work office and i dont have admin privilege,cmd is disabled and i doubt .bat would work i only can install odin
Click to expand...
Click to collapse
It should work i guess but i recommend you to flash the ROOT.bat since it was tested and working 100%

HaxerProz said:
It should work i guess but i recommend you to flash the ROOT.bat since it was tested and working 100%
Click to expand...
Click to collapse
let it be the first test,i will flash supersu and if it fail i will try to run .bat,i already have a stock rom of j7 prime in case if anything went wrong

fakih.m7md said:
let it be the first test,i will flash supersu and if it fail i will try to run .bat,i already have a stock rom of j7 prime in case if anything went wrong
Click to expand...
Click to collapse
Ok but have you flashed CWM through Odin yet?

HaxerProz said:
Ok but have you flashed CWM through Odin yet?
Click to expand...
Click to collapse
no

fakih.m7md said:
no
Click to expand...
Click to collapse
You should do that first to be able to root..you know right?

absolutely i flashed a lot of custom recoveries before even in this mobile i have flashed twrp but root failed because of touch issue in twrp

fakih.m7md said:
absolutely i flashed a lot of custom recoveries before even in this mobile i have flashed twrp but root failed because of touch issue in twrp
Click to expand...
Click to collapse
You tried to flash twrp on J7 prime? The official TWRP isn't available as far as i know

HaxerProz said:
You tried to flash twrp on J7 prime?
Click to expand...
Click to collapse
yes i used mouse via otg to fix touch issue but adb sideload didn't work

fakih.m7md said:
yes i used mouse via otg to fix touch issue but adb sideload didn't work
Click to expand...
Click to collapse
k let me know how's it going btw
You tried this http://forum.xda-developers.com/galaxy-j7/how-to/guide-root-galaxy-j7-prime-twrp-t3503926 i guess..yea the touchscreen isnt responding we gotta wait for official twrp

HaxerProz said:
k let me know how's going btw
You tried this http://forum.xda-developers.com/galaxy-j7/how-to/guide-root-galaxy-j7-prime-twrp-t3503926 ?
Click to expand...
Click to collapse
yes and i visited this post more than 10000 times since 20 november to look for a solution to root j7 prime

fakih.m7md said:
yes and i visited this post more than 10000 since 20 november to look for a solution to root j7 prime
Click to expand...
Click to collapse
me too....till i finally came up with a solution after hours of testing

HaxerProz said:
me too....till i finally came up with a solution after hours of testing
Click to expand...
Click to collapse
thanks a lot,you're great

fakih.m7md said:
thanks a lot,you're great
Click to expand...
Click to collapse
You're welcome

I booted into recovery and installed CWM. It passed as well. However, when I boot into recovery, I still dont get CWM recovery. I have made sure I have set OEM UNLOCK properly. Please help!!

archer797 said:
I booted into recovery and installed CWM. It passed as well. However, when I boot into recovery, I still dont get CWM recovery. I have made sure I have set OEM UNLOCK properly. Please help!!
Click to expand...
Click to collapse
Just repeat all the steps from the beginning and see if it works..
Btw you are supposed to boot into Downloading mode and from there flash CWM Recovery using Odin..i don't know what you have missed.