Because flashtool doesn't work on xzp
So i found flashing tool
Found a tool named NewFlasher
they said move flasher app to firmware downloaded folder by XperiaFirm
So i did and doing well
But it stopped working while flashing System.sin(maybe)
And i rebooted but it didn't boot
And just white Sony logo(and n and y letter is broken(?)
I go to flashmode but fastboot didn't work at all
What should i do...
and threre are any files i need to EXCLUDE when i flash again?
I didnt exclude any files and flashed. Am i doomed now?
did yout try to restore with xperia companion?
I unlocked the bootloader
kistigun said:
did yout try to restore with xperia companion?
Click to expand...
Click to collapse
I unlocked the bootloader
Is there any way to relock the bootloader ?
I unlcoked xz unlock at the sony developers site(xz unlock works to xzp)
( Help me ) NewFlasher Flashing Method
Hi,
Somethings wrong with your flashing.
do the thing only what i do ok.
1. if you have original download file from downloaded by xperiafirm, open it.
2. if not download the file again.
3. then open it and copy only .sin files to new folder name as XZP.
4. go to the downloaded file and there is a rar file name as partition.
5. extract that file to that new folder with name as partition in XZP folder.
6. then copy the newflasher.exe to the XZP folder.
7. Run newflasher.exe
8.type N and click enter.
9. then connect your phone to the PC while touching your Phone volume down key.
10. wait until finish the process and press ok and disconnect the phone.
11. switch on and you can see it as new one
Kanchuka said:
Hi,
Somethings wrong with your flashing.
do the thing only what i do ok.
1. if you have original download file from downloaded by xperiafirm, open it.
2. if not download the file again.
3. then open it and copy only .sin files to new folder name as XZP.
4. go to the downloaded file and there is a rar file name as partition.
5. extract that file to that new folder with name as partition in XZP folder.
6. then copy the newflasher.exe to the XZP folder.
7. Run newflasher.exe
8.type N and click enter.
9. then connect your phone to the PC while touching your Phone volume down key.
10. wait until finish the process and press ok and disconnect the phone.
11. switch on and you can see it as new one
Click to expand...
Click to collapse
thank you for your kind explanation
i didn't know that at all
Did my IMEI and other devices own info gone away....?
Kanchuka said:
Hi,
Somethings wrong with your flashing.
do the thing only what i do ok.
1. if you have original download file from downloaded by xperiafirm, open it.
2. if not download the file again.
3. then open it and copy only .sin files to new folder name as XZP.
4. go to the downloaded file and there is a rar file name as partition.
5. extract that file to that new folder with name as partition in XZP folder.
6. then copy the newflasher.exe to the XZP folder.
7. Run newflasher.exe
8.type N and click enter.
9. then connect your phone to the PC while touching your Phone volume down key.
10. wait until finish the process and press ok and disconnect the phone.
11. switch on and you can see it as new one
Click to expand...
Click to collapse
thank you for your kind explanation
i didn't know that at all
Did my IMEI and other devices own info gone away....?
한구긴 said:
thank you for your kind explanation
i didn't know that at all
Did my IMEI and other devices own info gone away....?
Click to expand...
Click to collapse
I have flashed my phone. but nothings change. but you cant safe your documents and data. because your phone already software crashed. so you can do it.
please note. this app is not recommended like flash tool. but you have no option to recover your phone.
did you try to repair your phone using Xperia companion.
before flashing using new flasher. try to repair your phone using Xperia Companion. which is officially recommended application. open xperia companion and click repair then select phone and wait until show you connect your phone with press and hold volume down key. if this works no need to use new flasher. if this not work you have to use new flasher
Kanchuka said:
I have flashed my phone. but nothings change. but you cant safe your documents and data. because your phone already software crashed. so you can do it.
please note. this app is not recommended like flash tool. but you have no option to recover your phone.
did you try to repair your phone using Xperia companion.
before flashing using new flasher. try to repair your phone using Xperia Companion. which is officially recommended application. open xperia companion and click repair then select phone and wait until show you connect your phone with press and hold volume down key. if this works no need to use new flasher. if this not work you have to use new flasher
Click to expand...
Click to collapse
I've already unlocked my bootloader
Is there any way to relock the bootloader?
(I tried xz's unlock method)
한구긴 said:
I've already unlocked my bootloader
Is there any way to relock the bootloader?
(I tried xz's unlock method)
Click to expand...
Click to collapse
No, you can not relock the bootloader since your DRM key are history
Related
i put wrong framework file in my sony ericsson neo v and after that my phone does not open ! what can i do for this ?
i ve saved the first file on my sd card !
please help !
Flash the original firmware using flashtool.For instructions use search option or try in the Xperia Neo subforum.
Sent from my MT11i using xda premium
problem with sony ericsson flashtool
i downloaded flashtool i install it on my windows and i followed this details
Switch off your phone and put it aside.
Extract the “FlashTool_x.x.x.x.exe” file on your PC (you can just double click on it to extract)
Few files and folders will be extracted — the two which we’ll be using are the ‘drivers‘ folder and the ‘firmwares‘ folder.
Inside the ‘drivers‘ folder there’s a file named “ggsetup-2.2.0.10.exe”, double click on this file to install the proper driver on your PC.
Now copy the “.ftf” firmware file that you downloaded for your phone, and paste it inside the “firmwares” folder.
Double click the “X10FlashTool.exe” file.
Once the program opens — click on the “Flash” button.
You’ll see the firmware that you copied in Step 5 loaded on the screen — click “Ok”!
Now it should ask you to connect your phone to the PC. So first plug the USB cable to PC, then pick up your phone and hold the “Back” key (key at the bottom left on your Arc), and then connect the USB cable to your phone. Remember you’ve to hold the “Back” key while connecting the USB cable to phone.
Once the phone gets connected — Flashtool will automatically start the flashing process.
Keep an eye on the Flashtool’s screen.
And once the process gets finished, disconnect your phone from PC and switch it ON.
Don’t freak if it takes longer to boot (that’s normal) as the phone has to build the cache again after flashing.
but with 4.1.a.0.562 version ! but now the phone opens and it shows nothing !
what did i do wrong ?
please help !
mixalis xro said:
i downloaded flashtool i install it on my windows and i followed this details
Switch off your phone and put it aside.
Extract the “FlashTool_x.x.x.x.exe” file on your PC (you can just double click on it to extract)
Few files and folders will be extracted — the two which we’ll be using are the ‘drivers‘ folder and the ‘firmwares‘ folder.
Inside the ‘drivers‘ folder there’s a file named “ggsetup-2.2.0.10.exe”, double click on this file to install the proper driver on your PC.
Now copy the “.ftf” firmware file that you downloaded for your phone, and paste it inside the “firmwares” folder.
Double click the “X10FlashTool.exe” file.
Once the program opens — click on the “Flash” button.
You’ll see the firmware that you copied in Step 5 loaded on the screen — click “Ok”!
Now it should ask you to connect your phone to the PC. So first plug the USB cable to PC, then pick up your phone and hold the “Back” key (key at the bottom left on your Arc), and then connect the USB cable to your phone. Remember you’ve to hold the “Back” key while connecting the USB cable to phone.
Once the phone gets connected — Flashtool will automatically start the flashing process.
Keep an eye on the Flashtool’s screen.
And once the process gets finished, disconnect your phone from PC and switch it ON.
Don’t freak if it takes longer to boot (that’s normal) as the phone has to build the cache again after flashing.
but with 4.1.a.0.562 version ! but now the phone opens and it shows nothing !
what did i do wrong ?
please help !
Click to expand...
Click to collapse
I think you are using a very old version.
Try the latest flashtool v7
And skip the final verification when flashing ICS firmware. Theres an option to do that in the screen where you select the firmware.
Sorry I cant give you any links coz my laptop's really ****ed up!
But I'll help you until you fix it.
And sorry for late reply.
Sent from my MT11i using xda premium
Hey guys,I have a Xperia S with no OS installed,only TWRP 2.5.0.0. Accidentally wiped internal sd card,tried CMD,s like fastboot,adb sideload rom.zip on the SDK adb map,but nothing seems to work.......(then it says"cannot read rom.zip)when I open a CMD and ask for adb devices it says"List of devices attatched:BX903B4CF9 recovery........WTF should I do?????I have litterally been trying for 2 weeks now....Please save me....I am at a loss.....thanx in advance
metaaltebbes said:
Hey guys,I have a Xperia S with no OS installed,only TWRP 2.5.0.0. Accidentally wiped internal sd card,tried CMD,s like fastboot,adb sideload rom.zip on the SDK adb map,but nothing seems to work.......(then it says"cannot read rom.zip)when I open a CMD and ask for adb devices it says"List of devices attatched:BX903B4CF9 recovery........WTF should I do?????I have litterally been trying for 2 weeks now....Please save me....I am at a loss.....thanx in advance
Click to expand...
Click to collapse
Please follow this tutorial, it will lead you to flash firmware using Flashtool
How to install the newest Android 4.1.2 for Sony XPERIA S LT26i
a) First of all, you need to install driver into your PC (You can use PC Companion to do it)
b) Download and install latest Flashtool from HERE.
c) Download also Android 4.1.2 firmware (you can find it HERE or HERE) for Sony XPERIA S LT26i
d) Paste the ftf file downloaded in step c) to folder „Firmware“ included in the XPERIA Flashtool
e) Open the XPERIA Flashtool, click on flash and choose downloaded firmware, than click ok. Important - if you do not want to delete any data of your phone, just uncheck flashing userdata.sin file. All data will remain in your phone, but sometimes it can cause additional troubles. So it is better (and I recommend that) to do the backup of your personal data, than proceed with clean instalation and then restore your personal data.
f) Turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button
g) After few minutes all is done and your phone gets the new firmware
GOOD LUCK
TWRP should allow you to mount your device as USB device and install a zip file that contains a rom.
1.Download lollipop firmware
2.Download gapps
3.Download dual sim patch from and copy all zip file to your sd card
4.Now root your device,it can be easily done without pc using app called towelroot and click on make it rain!
5.After rooting unlock your bootloader
6.When you will successfully unlock the bootloader you may brick your phone but dont worry
7.From the above lollipop firmware extract the file named boot,img
8.To flash that file you need to download software known as flashtool 0.9.15.0
9,Install appliction and connect your device in fastboot mode,To connect your phone in fastboot mode hold the volume up button and connect your phone to your pc on the screen it will inform that device connected in fastboot mode
10.Now click on the flash icon located on top left and click on fastboot mode`and click ok
11.Now click on select system to flash and then a window will popup to select file now see on the bottom it will be selected *.sin change it into *.img
12.Now locate your boot.img file that you extracted on step 7
13.Now click ok it will be flashed
14.Now poweron your phone and long press the volume up key and you will see that notification light first turn orange and then green and you will come on recovery mode now select wipe and clear all data,system cache,dalvic cache and now come back to main menu and click on install and select micro sd and flash all the zip file we downloaded before
15.After flashing click on reboot
16.Now to make your both sim work use root explorer and goto system/build.prop and Remove these following ones :
CODE:
ro.ril.telephony.mqanelements=4
persist.radio.oem_socket=false
And write
CODE :
persist.radio.multisim.config=dsds
persist.radio.dont_use_dsd=true
17.For any problem please comment!
Enjoy!
Hi,
here isn't the right place for this kind of thread. Please see this forum for Xperia M
Sony Xperia M
Thanks for understanding
Thread closed
hi im using nokia 6 Ta-1021 indian model with android 8.....i have to downgrade 7.1.2.... plz help me out with this clearly post with link plz anyone thanks in advance
magikavi said:
hi im using nokia 6 Ta-1021 indian model with android 8.....i have to downgrade 7.1.2.... plz help me out with this clearly post with link plz anyone thanks in advance
Click to expand...
Click to collapse
First thing first, everything you do will be doing on your own risk, these steps are working perfectly but still if anything happened, i will be not responsible for it:
Follow the steps carefully:
First down load the required files
1. Firmware and flashing tool to downgrade from here
https://forum.xda-developers.com/nokia-6/how-to/nokia-6-official-firmware-mena-region-t3664441
2. July to January [2018 naugat] OTA from here
Download the February oreo OTA also( in case if you failed to flash your device)
https://forum.xda-developers.com/nokia-6/how-to/updated-mirror-link-ota-monthly-updates-t3733784
3. This whole process will also required a sd card or memory card
4. The instructions to flash the device is available on the firmware thread that i provided you.
Now
Install the tool that you downloaded from the link
Put all the OTA zips ok the sd card and reboot your device to recovery
To put it into recovery, power off your device properly
Plug your charger, and wait to see the battery charging animation
Once you see the battery icon, press and hold the power key and volume plus button together
Once you see the android logo, release the power button but keep holding volume plus button teel you see a screen with "no command" written
When you see the screen no command screen
Just hit these three button together simultaneously
Power button+volume plus+home key(fingerprint sensor)
For 2-3 times
You will see the recovery menu
Now select the option, update from sd card
Select the December OTA from sd card
Now it will give you error but it will change some files and nougat recovery menu
Reboot your device, it will take you to direct recovery menu
Now
The instructions will be for OST tool and for mena firmware
Install OST tool
Now
1. Open ur directory, c:/program files x86/OST and replace the online update tool from there and delete the config file,
AND REMEMBER THIS IS VERY IMPORTANT,
2. Open online update tool from ur directory only, from c:/program files x86/OST only, donot start it from any shortcut created on desktop or from start menu, just start it from its original directory,
if it still gives error about microsoft error warning, try fresh replacing ur online update tool again from the zip
And start the program from there only, once it successfully started
3. Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 file and put ur phone into bootloader, click next button, now the first time u may stuck on flashing splash file and ur phone could restarted
4. Follow all the same steps again
5. Start the tool again
The tool will surely give u error for Microsoft.net
Dont panic
Close it and replace the file again
6. Remember no matter if replace the file before error, it will give error for one time surely
7. Replace it again with online updating tool and the start it from the directory
8. Now Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 ( your one could be CNxxxx) file and put ur phone into bootloader
9. Now connect it and click next this time your phone will get flashed successfully...if it give error again, then try one more time u will be successfully installed the mena firmware
After this your device could ask you to reset your device. Just do it.
Now one thing to remember
The
Hi, I have G8142 stock ROM unlocked with DRM fix and root. Is possible way to flash new stock update without lossing data? Thanks
Dude totally wrong area to post this. This is not development related at all.
Do a backup in twrp. Flash new firmware and then restore data in twrp . That's what I've been doing
pikeylfc said:
Do a backup in twrp. Flash new firmware and then restore data in twrp . That's what I've been doing
Click to expand...
Click to collapse
Thanks
flash newflasher without data loss
Cherokee007 said:
Hi, I have G8142 stock ROM unlocked with DRM fix and root. Is possible way to flash new stock update without lossing data? Thanks
Click to expand...
Click to collapse
1) First, download Newflasher sofware, download stock rom with Xperifirm.
2) Unzip newflasher in a new folder, named "Newflasher"
3) Unzip the all files to the sotck firmware, and put in the same folder "Newflasher"
4) Exclude personal data files (delete this 5 files to the folder)
appslog_X-FLASH-ALL-42E5.sin
diag_X-FLASH-ALL-42E5.sin
persist_X-FLASH-ALL-42E5.sin
ssd_X-FLASH-ALL-42E5.sin
userdata_X-FLASH-ALL-42E5.sin
5) Power off the Sony Xz Premium. After, hold volume down key while connect the device usb to the Pc (Green light) "flashmode"
6) Run Newflasher.exe (set "n", set "n", No two times)
7) Wait ten minutes and done, new firmware without any personal data loss.
callejongaston said:
1) First, download Newflasher sofware, download stock rom with Xperifirm.
2) Unzip newflasher in a new folder, named "Newflasher"
3) Unzip the all files to the sotck firmware, and put in the same folder "Newflasher"
4) Exclude personal data files (delete this 5 files to the folder)
appslog_X-FLASH-ALL-42E5.sin
diag_X-FLASH-ALL-42E5.sin
persist_X-FLASH-ALL-42E5.sin
ssd_X-FLASH-ALL-42E5.sin
userdata_X-FLASH-ALL-42E5.sin
5) Power off the Sony Xz Premium. After, hold volume down key while connect the device usb to the Pc (Green light) "flashmode"
6) Run Newflasher.exe (set "n", set "n", No two times)
7) Wait ten minutes and done, new firmware without any personal data loss.
Click to expand...
Click to collapse
ERROR: GetOverLapped_out_Result: failed with error code 1 as follows:
Nesprßvnß funkce.
- Error write! Need nBytes: 0x18 but done: 0x0
nBytes[0x0]:
- Error writing command getvar:max-download-size!
End. You can disconnect your device when you close newflasher.exe
Press any key to continue . . .
callejongaston said:
1) First, download Newflasher sofware, download stock rom with Xperifirm.
2) Unzip newflasher in a new folder, named "Newflasher"
3) Unzip the all files to the sotck firmware, and put in the same folder "Newflasher"
4) Exclude personal data files (delete this 5 files to the folder)
appslog_X-FLASH-ALL-42E5.sin
diag_X-FLASH-ALL-42E5.sin
persist_X-FLASH-ALL-42E5.sin
ssd_X-FLASH-ALL-42E5.sin
userdata_X-FLASH-ALL-42E5.sin
5) Power off the Sony Xz Premium. After, hold volume down key while connect the device usb to the Pc (Green light) "flashmode"
6) Run Newflasher.exe (set "n", set "n", No two times)
7) Wait ten minutes and done, new firmware without any personal data loss.
Click to expand...
Click to collapse
What about boot and partition?
Thank you