Database Info

Need help. I think its dead.

I have an AL-10 64GB mate 8. I wanted to turn it to the iternational ROM to have google apps. I followed this guide: http://forum.xda-developers.com/mate-8/general/howto-load-international-mate-8-t3293619
Afte flashing with fastboot commands the files my phone doesn't boot up. It shows the warning screen because it is Unlocked but I doesn't boot in menu.

u forgot to flash boot.img, try that through fastboot as well and then try and boot again

jbmc83 said:
u forgot to flash boot.img, try that through fastboot as well and then try and boot again
Click to expand...
Click to collapse
There isn't a boot.img in the thread there. Where do I find it?

So I thought to try myself something... I flashed the oldest boot.img from this thread: http://forum.xda-developers.com/mate-8/orig-development/kernel-insecure-boot-img-t3311306 (B156 FLASHABLE IMG). The only difference now is that it remains stuck at the warning scrren. Previously that screen would dissapear and the phone would be total black.

Also I downloaded the update.app from here: http://forum.xda-developers.com/mate-8/general/nxt-l09-nxt-l29-stock-rom-b133-download-t3311839 of L29. Extracted boot,cache,cust,system,recovery,userdata from that package and flashed all files with fastboot. Everything successful but still stucked at warning screen.

eltarod said:
Also I downloaded the update.app from here: http://forum.xda-developers.com/mate-8/general/nxt-l09-nxt-l29-stock-rom-b133-download-t3311839 of L29. Extracted boot,cache,cust,system,recovery,userdata from that package and flashed all files with fastboot. Everything successful but still stucked at warning screen.
Click to expand...
Click to collapse
try this first
1- go to recovery then factory reset then reboot if not booting so try this method below (use same update.app file)
rowihel2012 said:
Download the update file
Extract
Folder "dload" at the root level of the memory Share (internal or external).
Update.app in the folder "dload" Copy
As Huawei has removed the item "Local Update" from the update program, you must do the following:
Option 1: update via ForceUpdate
Switch off
Simultaneously Power + Volume Down + volume Louder press until the update starts
Click to expand...
Click to collapse

dload doesn't work. I did manage to install TWRP though... Will try to flash a custom ROM

So I managed to make it boot using DarkSilentSC instruction: http://forum.xda-developers.com/mat...ng-to-b321-t3375934/post66776218#post66776218
Only 2 problems left. First the memory shows 4GB rather than 64GB and there is no theme support. Any idaes?

hmmm....try and go to recovery and format the data partition, maybe that helps.... just make sure u dont have any important data on the phone before u do that

Data partition is:
TWRP - wipe - advanced wipe - tick data and slide to start?
Sent from my HUAWEI NXT-L29 using Tapatalk

Nevermind I did it thanks to jbmc83. The solution for anyone that has the same problem is to format data partition. It's in twrp-wipe the right button. Thanks to jbmc83 and to all that helped me!!
Sent from my HUAWEI NXT-L29 using Tapatalk

yep thats correct although i think ull have to type "yes" in order to start it. in any case, just follow the screen instructions! also, be aware that this takes a lot of time, so wait at least half an hour before giving up ^^ let it run its course!
edit: ah ok, i just saw that it worked! glad it did

Huawei mate 8, hard bricked while it's updating. Pho
Huawei mate 8, hard bricked while it's updating custom rom. Phone is not responding at all. No power, black screen, it i put on charging, doesn't feeling like battery charging. Can someone help me out this problem.

Yes, if you can go into bootloader mode, kindly run these commands and report back what are the results.
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem get-build-number

dear phone doesn't respond at all. not connecting to pc. no sign of power.

Syd2Ldh said:
dear phone doesn't respond at all. not connecting to pc. no sign of power.
Click to expand...
Click to collapse
Which rom were you try to flashing which caused this issue?

honor 4c stuck in boot

Hi
my honor 4c device stuck in boot and i can not do any thing about it !
i'm new in android adb and fastboot and TWRP and ... , read a lot about these but nothing i can do about this problem !
I had TWRP installed before on it ,
In TWRP when i use adb devices its output is like this :
A8K4C15VC4002343 recovery
and when i use fast boot its output is like this :
A8K4C15VC4002343 fastboot
I test dload directory way that i used before for upgrading to android 5 and then 6 , but now when i want to use it and press powerButton + volume up for going to update mode, instead it is go to TWRP recovery mode !!
How can i fix it ?
Thanks.

alirezaimi said:
Hi
my honor 4c device stuck in boot and i can not do any thing about it !
i'm new in android adb and fastboot and TWRP and ... , read a lot about these but nothing i can do about this problem !
I had TWRP installed before on it ,
In TWRP when i use adb devices its output is like this :
A8K4C15VC4002343 recovery
and when i use fast boot its output is like this :
A8K4C15VC4002343 fastboot
I test dload directory way that i used before for upgrading to android 5 and then 6 , but now when i want to use it and press powerButton + volume up for going to update mode, instead it is go to TWRP recovery mode !!
How can i fix it ?
Thanks.
Click to expand...
Click to collapse
Try to flash stock firmware using adb?!

PalakMi said:
Try to flash stock firmware using adb?!
Click to expand...
Click to collapse
Thanks for your answer,
How ?? Can you explain it a little more ? Because I can not go to update mode with power and volume buttons. It is go to twrp mode instead.
Thanks

alirezaimi said:
Thanks for your answer,
How ?? Can you explain it a little more ?
Thanks
Click to expand...
Click to collapse
Try this method here
http://forum.xda-developers.com/android/development/reverting-to-stock-rom-honor-4xmsm8916-t3168732
Download the 4c firmware and proceed with the same steps (in step 6 use the combo to access fastboot on your 4c)

PalakMi said:
Try this method here
http://forum.xda-developers.com/android/development/reverting-to-stock-rom-honor-4xmsm8916-t3168732
Download the 4c firmware and proceed with the same steps (in step 6 use the combo to access fastboot on your 4c)
Click to expand...
Click to collapse
Thanks, I did this and TWRP is gone away too! My phone is stuck in boot and I can not go to recovery mode or fastboot mode !
Why?!

PalakMi said:
Try this method here
http://forum.xda-developers.com/android/development/reverting-to-stock-rom-honor-4xmsm8916-t3168732
Download the 4c firmware and proceed with the same steps (in step 6 use the combo to access fastboot on your 4c)
Click to expand...
Click to collapse
Thanks, I did this and TWRP is gone away too! My phone is stuck in boot and I can not go to recovery mode or fastboot mode !
Why?!

alirezaimi said:
Thanks, I did this and TWRP is gone away too! My phone is stuck in boot and I can not go to recovery mode or fastboot mode !
Why?!
Click to expand...
Click to collapse
Did you flash stock recovery or not?! If not you can't flash the firmware back.

PalakMi said:
Did you flash stock recovery or not?! If not you can't flash the firmware back.
Click to expand...
Click to collapse
I did these :
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Power and volume keys not worked at all.
It is enough?
Twrp removed. And I can not see device with neither of adb or fastboot.
Thanks.

alirezaimi said:
I did these :
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Power and volume keys not worked at all.
It is enough?
Twrp removed. And I can not see device with neither of adb or fastboot.
Thanks.
Click to expand...
Click to collapse
Installation is correct, it should boot. something is wrong
---------- Post added at 10:27 PM ---------- Previous post was at 10:17 PM ----------
I know it's a bit hard to go to Fastboot mode when the device gets stuck at the Honor logo since there is no way to power it off because we have no removable battery (or you could let the phone battery drain). Still there is a chance to get it to Fastboot mode. When you're stuck at the Honor logo, hold the power button to initiate a forced reboot. Now as soon as device screen goes black immediately hold the volume down button and connect your device to computer via a USB cable. You have 1-3 seconds to do it so it will take several attempts to get success. As soon as your device reaches fast boot, flash a custom recovery and reboot to recovery. If it works tell me.

Hey.. You can do 1 thing.. Download the huawei update extractor.. It will extract the app and give you recovery. Img.... Them flash both recovery and recovery2. Img.. Now you hav the stock recovery.. Now put that app in ext sd dload and wait for it to update . Hope it works. Workd for me

PalakMi said:
flash a custom recovery and reboot to recovery. If it works tell me.
Click to expand...
Click to collapse
Don't you think he needs to flash a stock recovery instead of a custom one? As he wants to do a Stock update.

DigiGoon said:
Don't you think he needs to flash a stock recovery instead of a custom one? As he wants to do a Stock update.
Click to expand...
Click to collapse
I didn't pay attention to it

PalakMi said:
I didn't pay attention to it
Click to expand...
Click to collapse
So, you are just gaining ranking by posting anything without paying attention.

DigiGoon said:
So, you are just gaining ranking by posting anything without paying attention.
Click to expand...
Click to collapse
No, I try to help, but also to rank up I do this because I can't afford to pay devices prices and the the additional 250$ of importing and shipping

PalakMi said:
No, I try to help, but also to rank up I do this because I can't afford to pay devices prices and the the additional 250$ of importing and shipping
Click to expand...
Click to collapse
Yea, me too, but if you get the device, are you gonna develop something for it? Or have you developed something for it?

DigiGoon said:
So, you are just gaining ranking by posting anything without paying attention.
Click to expand...
Click to collapse
No, I try to help, but also to rank up I do this because I can't afford to pay device's prices and the the additional 250$ of importing and shipping

PalakMi said:
No, I try to help, but also to rank up I do this because I can't afford to pay device's prices and the the additional 250$ of importing and shipping
Click to expand...
Click to collapse
Are you sure you are answering one time only?

DigiGoon said:
Yea, me too, but if you get the device, are you gonna develop something for it? Or have you developed something for it?
Click to expand...
Click to collapse
Yes, I'm gonna develop (I just got a better laptop last month) and sorry for duplicate comments, I have network issues now

PalakMi said:
Yes, I'm gonna develop (I just got a better laptop last month) and sorry for duplicate comments, I have network issues now
Click to expand...
Click to collapse
Cool, so we are getting a new developer soon

DigiGoon said:
Cool, so we are getting a new developer soon
Click to expand...
Click to collapse
Yes, it is my ultimate dream

Honor 8 Bricked

Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.

Flo.B said:
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Click to expand...
Click to collapse
But please confirm , was the update from b120 to b316 successfull?
Sent from my KIW-L22 using Tapatalk

gopinaidu77 said:
But please confirm , was the update from b120 to b316 successfull?
Click to expand...
Click to collapse
I think it failed because the warning screen showed right?
Sent from my honor 5X using XDA Labs

adriansticoid said:
I think it failed because the warning screen showed right?
Click to expand...
Click to collapse
Right that was what I am also thinking bro.
---------- Post added at 01:35 PM ---------- Previous post was at 01:35 PM ----------
adriansticoid said:
I think it failed because the warning screen showed right?
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
So it's a failure . which mean that it is a semi flashed update . which doesn't installed update.app .
Extract update.app from ota and put it in dload folder .later flash it manually using dload method .
He should follow this way to overcome those reboots
Sent from my KIW-L22 using Tapatalk
---------- Post added at 01:36 PM ---------- Previous post was at 01:35 PM ----------
Flo.B said:
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Click to expand...
Click to collapse
Consider reading my above post bro.
Sent from my KIW-L22 using Tapatalk

HONOR 8 Bricked
Hello ,
It happened on my FRD-L04, but I think is the same.
Bootloader is unlocked ?
1. Do you have all drivers installed ? OK
2.Do you have STOCK ROM ? OK. If not, use Huawei Firmare Finder to find suitable ROM. Be aware what you choose !!!
3. Unzipp (WinRar) the ROM.
4.Download and install Huawei Update Extractor. Run Huawei Update Extractor . Choose Update.app from the folder you unzipped the ROM.
5. Select cust.img , boot.img , recovery.img and system.img and extract them on a folder.
6.. Install MultiTool by Team (Multi Tool Team). The instalation will make a folder named UNBRICK.
7. Move the files extracted : cust.img , boot.img , recovery.img and system.img on the folder UNBRICK
8. Run MultiTool . Choose option 6 (unbrick) and after that choose option 2 ( if you already have files on folder UNBRICK)
9. Let the tool finish the job.
NOTE : You must have all drivers installed and the phone in FASTBOOT mode ( turn phone OFF - Press VOL- and insert USB cable simultaneously.)
Good luck !

Hi, thanks everyone for your reply.
Unfortunatly, the dload method seems not work. I think that to run this method, i need to press simultaneously vol+, vol- and the power button to run it, right ?
If it's like that, the method doesn't work anymore.
I will try the process given by technoguy09 and I said to you if it's ok !

So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?

Flo.B said:
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Click to expand...
Click to collapse
Was the bootloader unlocked ?
Do u have twrp installed ?
Sent from my KIW-L22 using Tapatalk
---------- Post added at 03:53 PM ---------- Previous post was at 03:53 PM ----------
Flo.B said:
Hi, thanks everyone for your reply.
Unfortunatly, the dload method seems not work. I think that to run this method, i need to press simultaneously vol+, vol- and the power button to run it, right ?
If it's like that, the method doesn't work anymore.
I will try the process given by technoguy09 and I said to you if it's ok !
Click to expand...
Click to collapse
If u have twrp I will make a flashable zip of stock ROM and cust
Sent from my KIW-L22 using Tapatalk

The bootloader is unlock and TWRP was install but now I can't access it. I try to restore stock recovery and it's the same result.

Flo.B said:
The bootloader is unlock and TWRP was install but now I can't access it. I try to restore stock recovery and it's the same result.
Click to expand...
Click to collapse
Can fastboot detect your phone?

Yes, fastboot is detect, I can launch some command (fastboot devices display my phone, flash etc) everything work but flash recovery didn't change anything and flash system response an error (sparse flash write failure).

Flo.B said:
Yes, fastboot is detect, I can launch some command (fastboot devices display my phone, flash etc) everything work but flash recovery didn't change anything and flash system response an error (sparse flash write failure).
Click to expand...
Click to collapse
From what you said, looks like it is reallt bricked. Service center is your friend.

I think too... I hope that there will be no problem with service center because of the phone is unclocked !
I was never had this kind of problem with my previous android phone. I'm really bad ^^
Thanks for all everybody.

Flo.B said:
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Click to expand...
Click to collapse
Try another ROM.

Flo.B said:
I think too... I hope that there will be no problem with service center because of the phone is unclocked !
I was never had this kind of problem with my previous android phone. I'm really bad ^^
Thanks for all everybody.
Click to expand...
Click to collapse
Goodluck with it buddy.

technoguy09 said:
Try another ROM.
Click to expand...
Click to collapse
I try at least 3 ROM download on different website. I don't think that it can change anything.

I had the same problem.
Dont worry, Honor 8 phones are nearly unbrickable.
Take your B120 ROM extract recovery, cust and boot partitions. (use huawei update extractor)
Flash Them via fastboot (adb) then force the dload method via the 3 buttons combo.
I had all the problems you described and restored my phone as new. (even the "sparse flash write failure" error)
Now i'm on EMUI 5 rooted, no problem
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
Please refer this thread as it might help you.
http://forum.xda-developers.com/mate-8/general/fuss-debrick-restore-mate-8-t3457969
Have a little faith in your Honor

Flo.B said:
I try at least 3 ROM download on different website. I don't think that it can change anything.
Click to expand...
Click to collapse
Did you use Huawei Firmare Finder for your model ?

morpheus302 said:
I had the same problem.
Dont worry, Honor 8 phones are nearly unbrickable.
Take your B120 ROM extract recovery, cust and boot partitions. (use huawei update extractor)
Flash Them via fastboot (adb) then force the dload method via the 3 buttons combo.
I had all the problems you described and restored my phone as new. (even the "sparse flash write failure" error)
Now i'm on EMUI 5 rooted, no problem
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
Please refer this thread as it might help you.
http://forum.xda-developers.com/mate-8/general/fuss-debrick-restore-mate-8-t3457969
Have a little faith in your Honor
Click to expand...
Click to collapse
I have extract all this img but the flash of cust won't work too so, the dload method can't be launch. Now, I send my phone to the service center yesterday. Wait and See ^^
technoguy09 said:
Did you use Huawei Firmare Finder for your model ?
Click to expand...
Click to collapse
Yes, I Download 2 ROM on it but same problem on both.

Flo.B said:
I have extract all this img but the flash of cust won't work too so, the dload method can't be launch. Now, I send my phone to the service center yesterday. Wait and See ^^
Yes, I Download 2 ROM on it but same problem on both.
Click to expand...
Click to collapse
Leave it for service centre people .they will take care
Sent from my KIW-L22 using Tapatalk

NEED HELP ! Honor view 10 can't start...

Hi, i really need help, I don't know what to do ...
I tried to flash ma phone with lineageos 16.
But i had some problems with play store, so i tried re-flash lineageos with TWRP.
I must have done something wrong with full wipe but now, my phone can't launch anymore...
It don't launch system or recovery ...
I can turn into fastboot mode but that's all. I tried flash recovery ramdisk with erecovery stock (emui9) but it doesn't launch...
The first picture shows what's one screen when i boot into normal mode and the second one shows what's on screen when i boot into recovery mod.
But after these pictures, nothing happen.... really nothing.... The screen stay like this for long time. The phone comes very hot .... I had to let the battery down to reboot into fastboot mode.
Please anyone can help me ????

Can you boot into eRecovery with Volume up?First Pic Number 2

letschky said:
Can you boot into eRecovery with Volume up?First Pic Number 2
Click to expand...
Click to collapse
No...
When I do, it's just the same... Screen block like first picture...
Envoyé de mon F5121 en utilisant Tapatalk

Rob1hn said:
No...
When I do, it's just the same... Screen block like first picture...
Envoyé de mon F5121 en utilisant Tapatalk
Click to expand...
Click to collapse
Test a another way,
Power off the Phone.
Press and Hold Volume up and put the USB Cable from your Pc in the Phone and keep volume up until it's booted into the eRecovery
---------- Post added at 06:04 PM ---------- Previous post was at 05:53 PM ----------
that does not work,boot into Fastboot Mode and Flash System,Cust,Boot and Recovery img from Stockrom via Fastboot.
You should know what version you had before, before you flashed Lineage OS.
Download Emui Stockrom and extract the UPDATE.APP with Huawei Extractor and copy System,Cust,Boot and Recovery img in your ADB/Fastboot Folder
You can the Firmware found in Huawei Firmware Finder from Playstore.
Flash all the img files via Fastboot
Huawei Extractor
Did not make Twrp Backup before you flashed Lineageos that could help too.

From pictures attached
which img files i have to flash and which command line i have to use?
Thanks a lot

Rob1hn said:
From pictures attached
which img files i have to flash and which command line i have to use?
Thanks a lot
Click to expand...
Click to collapse
Did you try booting to erecovery? Thats the best way to restore, i messed up my v10 the same way and restored via erecovery.
If not, you may try dload method to restore stock.
Or you may try flashing the system, cust and other img as mentioned in above comment.
Erecovery and dload is still your best bet.

I can't turn into erecovery....
The screen stay on the pictures I uploaded
Which img files exactly I have to flash and which command line I have to use?
Thanks
Envoyé de mon F5121 en utilisant Tapatalk

Rob1hn said:
I can't turn into erecovery....
The screen stay on the pictures I uploaded
Which img files exactly I have to flash and which command line I have to use?
Thanks
Envoyé de mon F5121 en utilisant Tapatalk
Click to expand...
Click to collapse
Check one of the guide in my signature to return to stock with such issues.
Here
https://forum.xda-developers.com/ho...return-to-stock-flashing-custom-roms-t3809905

shashank1320 said:
Check one of the guide in my signature to return to stock with such issues.
Here
https://forum.xda-developers.com/ho...return-to-stock-flashing-custom-roms-t3809905
Click to expand...
Click to collapse
I have the same issue and already tried that. Your guide seems to be for EMUI 8.x and with 9.x some files and partition names have changed so i get errors. Tried adapting it and even managed to flash the system but it does not boot or enter erecovery.
I can even flash twrp on the phone but it gets then stuck on the splashscreen of twrp and doesn*t load further. fastboot boot is not working either and i can't relock the bootloader. I am pretty much out of options.

180190 said:
I have the same issue and already tried that. Your guide seems to be for EMUI 8.x and with 9.x some files and partition names have changed so i get errors. Tried adapting it and even managed to flash the system but it does not boot or enter erecovery.
I can even flash twrp on the phone but it gets then stuck on the splashscreen of twrp and doesn*t load further. fastboot boot is not working either and i can't relock the bootloader. I am pretty much out of options.
Click to expand...
Click to collapse
I think the partition names have changed because I am in the same situation.
This is my story:
https://forum.xda-developers.com/honor-view-10/help/9-0-0-official-pie-update-failed-boot-t3889378

elfabio said:
I think the partition names have changed because I am in the same situation.
This is my story:
https://forum.xda-developers.com/honor-view-10/help/9-0-0-official-pie-update-failed-boot-t3889378
Click to expand...
Click to collapse
I have figured it out. You have to flash ramdisk_recovery and kernel. Then you should get into erecovery with pluged usb in and holding power up and power off/on button. Worked for me.

Tripar said:
I have figured it out. You have to flash ramdisk_recovery and kernel. Then you should get into erecovery with pluged usb in and holding power up and power off/on button. Worked for me.
Click to expand...
Click to collapse
Let's just assume i am a total idiot. Which file exactly did you flash to what partition?

180190 said:
Let's just assume i am a total idiot. Which file exactly did you flash to what partition?
Click to expand...
Click to collapse
I have downloaded BKL-L09C432E4R1P9B159 (9.0.0.159) file from this site. Then I downloaded HuaweiExtractor and extracted the update.app file that is located in rom zip. After that i extracted the kernel and recovery_ramdisk files and in fastboot mode write:
fastboot flash kernel KERLEL.IMG
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.IMG (or something like that).
I am not sure if flashing system is needed here, but I did it too.
Hope this helps.
EDIT: Those files are for C435.

Sadly this didn't help me. Still stuck at "Your device is booting now..."

And did you tried to plug in usb and hold volume up and power off? It should boot into erecovery now.

Tried that, no erecovery. I have no idea what i could have done to damage it this badly.

Tripar said:
I have figured it out. You have to flash ramdisk_recovery and kernel. Then you should get into erecovery with pluged usb in and holding power up and power off/on button. Worked for me.
Click to expand...
Click to collapse
I think i have already tried this.
1/ Can you say me which fastboot command did you use for flashing kernel and the recovery_ramdisk ?
2/ Can you say me which files (source link or whatever) did you use ?

elfabio said:
I think i have already tried this.
1/ Can you say me which fastboot command did you use for flashing kernel and the recovery_ramdisk ?
2/ Can you say me which files (source link or whatever) did you use ?
Click to expand...
Click to collapse
I wrote it in the previous post.

180190 said:
Sadly this didn't help me. Still stuck at "Your device is booting now..."
Click to expand...
Click to collapse
Bro, check my QnA. I explained how it got resolved for me. Or I just got lucky. Unsure! This is quite recoverable.

ankan1993 said:
Bro, check my QnA. I explained how it got resolved for me. Or I just got lucky. Unsure! This is quite recoverable.
Click to expand...
Click to collapse
Where can I find that? Nothing i have tried has worked so far.

System has been destroyed error

I installed orange fox then installed arrow os used it for some days on my poco m2 pro(gram)..then wanted to switch to miui back with bootloader lock again..
Comnected through fastboot opened mi flashtool and flashed the 12.0.2 fastboot rom..got an error cannot load directory poco (something like that)
Booted phone by pressing power button got an error system has been destroyed..
Luckily had orange fox so cleared system and went back to arrow os.. tried whole process again got system destroyed.
Have did this process many times never got this error.
First time getting this error..
I don't understand the issue please help guys

mridul98 said:
I installed orange fox then installed arrow os used it for some days on my poco m2 pro(gram)..then wanted to switch to miui back with bootloader lock again..
Comnected through fastboot opened mi flashtool and flashed the 12.0.2 fastboot rom..got an error cannot load directory poco (something like that)
Booted phone by pressing power button got an error system has been destroyed..
Luckily had orange fox so cleared system and went back to arrow os.. tried whole process again got system destroyed.
Have did this process many times never got this error.
First time getting this error..
I don't understand the issue please help guys
Click to expand...
Click to collapse
Did you use miflash this way?
Download rom TGZ files
Extract folder to the same folder than MIflash
Rename folder (like Miui12456)
Flash with option Clean all

No no renaming no same file location
And yes clean all and lock i chose

mridul98 said:
No no renaming no same file location
And yes clean all and lock i chose
Click to expand...
Click to collapse
Just cleanall not relock
Rename the folder and put it in the same directory of miflash

Ok I'll try it

mridul98 said:
Ok I'll try it
Click to expand...
Click to collapse
And it would be better if you post here https://forum.xda-developers.com/c/poco-m2-pro.11067/

i get problem system destroyed error on mi play
my phone still unlock
only can fastboot mode
how can i fix this?
anyone please help me
how can unlock xiaomi from fastboot
thank's

parabinatang said:
i get problem system destroyed error on mi play
my phone still unlock
only can fastboot mode
how can i fix this?
anyone please help me
how can unlock xiaomi from fastboot
thank's
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/use-xiaomi-flash-tool.4262425/

NOSS8 said:
https://forum.xda-developers.com/t/use-xiaomi-flash-tool.4262425/
Click to expand...
Click to collapse
sorry, now the problem i cant Hold power and Volume UP button
when i do like this will appear the system has been destroyedm press power button to shutdown
only can Hold power and volume down for fastboot mode

parabinatang said:
sorry, now the problem i cant Hold power and Volume UP button
when i do like this will appear the system has been destroyedm press power button to shutdown
only can Hold power and volume down for fastboot mode
Click to expand...
Click to collapse
Your bootloader is unlocked I changed the link(fastboot mode).

NOSS8 said:
Your bootloader is unlocked I changed the link(fastboot mode).
Click to expand...
Click to collapse
sorry still can't and say failed (remote not allowed in locked state)

parabinatang said:
sorry still can't and say failed (remote not allowed in locked state)
Click to expand...
Click to collapse
So the bootloader is't unlock?

NOSS8 said:
So the bootloader is't unlock?
Click to expand...
Click to collapse
yes unlock
have solution or not?

parabinatang said:
yes unlock
have solution or not?
Click to expand...
Click to collapse
The solution is Mi Flash, but Miflash shows that the phone is locked. What is the version of your phone? (Global, EEA, CN) How did this happen?

NOSS8 said:
The solution is Mi Flash, but Miflash shows that the phone is locked. What is the version of your phone? (Global, EEA, CN) How did this happen?
Click to expand...
Click to collapse
i dont know why can like this
because this company phone
because the old staff resign already
i think this CN version because another phone all use chinese language when i try hold power + volume up

parabinatang said:
i dont know why can like this
because this company phone
because the old staff resign already
i think this CN version
Click to expand...
Click to collapse
If the bootloader is locked (which it probably is) Miflash cannot do anything.
Try to see this.
https://c.mi.com/thread-2504118-1-0.html
https://forum.xda-developers.com/t/poco-f2-pro-bootloop-bootloader-locked.4235445/post-84515327
Sorry I have no other solutions.

NOSS8 said:
If the bootloader is locked (which it probably is) Miflash cannot do anything.
Try to see this.
https://c.mi.com/thread-2504118-1-0.html
https://forum.xda-developers.com/t/poco-f2-pro-bootloop-bootloader-locked.4235445/post-84515327
Sorry I have no other solutions.
Click to expand...
Click to collapse
still cant
but thank already try for help me

please help me
before i flash my phone (mi play mtk lotus)
after flash only stuck at mi logo
i already try use another rom but still can like this and i already try flash another phone but another phone normal and can get through mi logo
what wrong with my phone?
problem hardware?
i use 2 phone
same brand and type
same rom and application
but 1 problem only stuck at mi logo
different this phone only from developer mode
1 developer mode open but 1 developer mode close
thanks