Related
Disclaimer: I will not be held responsible for any damage to your phone, your PC or indeed your life from following this guide. The steps in this guide worked for me. If you have problems uninstall everything and start from Step 4 again. Doing this kind of thing could affect your warranty and all that so have a long hard think about it before you go ahead
US Owners - If you flash the UK firmware, you will lose 3g and wifi calling app etc... There are fixes for this problem that can be found on other Forums. A guide on how to restore this which has worked for others is HERE
##WARNING: be careful when flashing 2.51 firmware, firstly its patched so root isn't achievable by the usual methods, and isn't easy to downgrade back to other firmware - I suggest you search and read the various topics on it. My advice is to use 2.21 UK or 2.34 Deblur firmware##
This guide will show you how to debrand your Motorola Defy (Eg bought on T-Mobile UK and want generic UK firmware), or indeed restore the phone if you brick (Eg removing important apps that you shouldn’t have touched!!)
Props go to jutley (Modaco)for his debranding guide for the flipout, and dkspook (Modaco) for his information in other threads, and anyone else who thinks they may have contributed, oh yeah and my Mum.
##Disconnect phone from PC##
STEP 1 Download usb drivers here below
Motorola Drivers Here
STEP 2 Download the debranded Firmware here (To debrand to generic UK I used the one marked UK - choose the one for your country)
Choose Firmware Here
STEP 3 Download RSDLite - I used v4.9, I found earlier versions would not work. Get it here.
RSDLite 4.9 Here
STEP 4 Install the USB Drivers and the RSDLite program and reboot PC
STEP 5 Extract the firmware file you downloaded a while ago. Then copy the .sbf firmware file to c:\Program files\Motorola\RSDLite folder (installation directory for RDSLite). this should come out as JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_S
rvice1FF.sbf for the UK one.
STEP 6 Start the RSDLite program now where it says filename press the select button and find the .sbf firmware file in c:\Program files\Motorola\RSDLite (it should default to this folder) and select the (sbf) file some details will appear on the right hand side.
STEP 7 We now need to boot the phone into the bootloader (as above make sure the phone is disconnected from USB – not sure if matters tho!). Hold the volume up and then power the phone on, after about 5 seconds release the buttons and the bootloader should display - it will show the version and a battery check. Now plug in the USB cable and it should install the drivers . Once the driver installation has finished you should see the phone appear at the bottom of the RSDLite program window under `port 1` - Once this is there you are ready to flash the firmware. NB: I had issues getting it to show a number of times. Uninstalling RSDLite/Drivers, rebooting PC, and then reinstalling these resolved this issue.
STEP 8 Press the start button on the RSDLite and just relax while your device gets flashed,debranded etc. you will see a progress status on the right hand side wait till it reaches 100% but please do not disconect it will reboot the phone automaticly and restart the phone.And just wait untill android comes up and fully running untill you disconnect it should read (PLEASE START PHONE MANUALY) on RSDLite when this shows it is safe to unplug.
Hopefully now you will have a debranded/unbricked phone.
One thing I noticed that was cool is that the data partition stayed intact for me when I debranded, meaning all my settings and installed app (providing you hadn’t moved stuff to /system) were still there after the process – cool! The only thing you will have to do is re-root the device.
Hope you find this useful and I look forward to a great community for the Defy!
Nice job! This worked perfectly. We now just need the tmo us FW. I'm kind of iffy about messing with my phone much more until I have a failsafe.
nitewalkergr said:
Nice job! This worked perfectly. We now just need the tmo us FW. I'm kind of iffy about messing with my phone much more until I have a failsafe.
Click to expand...
Click to collapse
Whats the benefit of the T-Mobile US Firmware - some kind of extra functionality? If we could get it, we could flash by this method and flash back if we didn't like it anyways I suppose.
In theory this method is a failsafe tho because if you mess any thing up you can get back to a different firmware. I must say I personally would like to get my hands on the original T-Mobile UK .sbf, just in case I wanted to put it back to its original state for returns/repair, so if anyone has found it (I haven't yet) please let me know.
If a tmo us user flashes with the uk FW they lose 3g.
A tmo us or just generic us fw would give us the clean sweep option while keeping our 3g.
Can I use the Uk Firm for a Vodafone Spain Defy??
Higgsy said:
Whats the benefit of the T-Mobile US Firmware - some kind of extra functionality? If we could get it, we could flash by this method and flash back if we didn't like it anyways I suppose.
In theory this method is a failsafe tho because if you mess any thing up you can get back to a different firmware. I must say I personally would like to get my hands on the original T-Mobile UK .sbf, just in case I wanted to put it back to its original state for returns/repair, so if anyone has found it (I haven't yet) please let me know.
Click to expand...
Click to collapse
Hi Higgsy, long time no see! Guess its cos you sold your Hero/G2 Touch so you have no need to visit htcdevscene, Its dead there now a days lol. I just got my Defy from T-Mobile UK. I here your after the T-Mobile UK Defy firmware? and I havent rooted or touched the firmware on mine at all, all i've done is charged it up and used as my day to day phone. If you know of a way to pull the firmware from the phone i will gladly upload it for you, if its even possible?
P.s. still got my Hero/G2 Touch not sure if i wanna sell the lil work horse yet lol, what are they selling for these days?
pedrogamo said:
Can I use the Uk Firm for a Vodafone Spain Defy??
Click to expand...
Click to collapse
Yes, I have a simfree defy, and this is my versión. Same version for France, UK, Spain, etc
Cesar Pipes said:
Yes, I have a simfree defy, and this is my versión. Same version for France, UK, Spain, etc
Click to expand...
Click to collapse
Thanks!! I did it. Now my Defy is debranded. Bye Vodafone!
dj_destruction said:
Hi Higgsy, long time no see! Guess its cos you sold your Hero/G2 Touch so you have no need to visit htcdevscene, Its dead there now a days lol. I just got my Defy from T-Mobile UK. I here your after the T-Mobile UK Defy firmware? and I havent rooted or touched the firmware on mine at all, all i've done is charged it up and used as my day to day phone. If you know of a way to pull the firmware from the phone i will gladly upload it for you, if its even possible?
P.s. still got my Hero/G2 Touch not sure if i wanna sell the lil work horse yet lol, what are they selling for these days?
Click to expand...
Click to collapse
Now then DJD!
Na we need the .sbf file for it but it no biggy at the moment. Get it rooted mate - easiest way is to download z4root from the market - works a treat and roots in like 10 secs lol.
Stopped going on htcdevscene for a number of reasons, firstly i could never get on the site and secondly i felt the way it was run was very inconsistent.
Just sold my Hero - they are going for between 80-120 on ebay the top end is for brand new boxed. I have just sold mine to a mobile recycle place for £103. This phone is different gravy to the hero for sure.
Anyway mate look forward to seeing you around again
Thanks for this guide Higgsy, very easy to follow even for a noob like me.
I have now said goodbye to Vodafone's crap a mere 20 minutes after opening the box with my shiny new DEFY in that was delivered today.
milesg said:
Thanks for this guide Higgsy, very easy to follow even for a noob like me.
I have now said goodbye to Vodafone's crap a mere 20 minutes after opening the box with my shiny new DEFY in that was delivered today.
Click to expand...
Click to collapse
No probs - Gone be the dirty network custom apps and splash screens!!
Done too. Thank you.
EDIT: Just reflashed and then calibrated the compass. Seems to be working now. Sorry for the unnecessary message.
Ok, having taken the phone out since I got rid of the Vodafone stuff, I've discovered that the GPS is no longer working. I've got GPS Test on it and it only sees one satellite where before it saw a load. I'm going to reload the firmware now, but does anyone have any ideas?
Higgsy what are the benefits of rooting and flashing the generic unbranded software apart from getting rid of the t-mobile rubbish?
tim440 said:
EDIT: Just reflashed and then calibrated the compass. Seems to be working now. Sorry for the unnecessary message.
Ok, having taken the phone out since I got rid of the Vodafone stuff, I've discovered that the GPS is no longer working. I've got GPS Test on it and it only sees one satellite where before it saw a load. I'm going to reload the firmware now, but does anyone have any ideas?
Click to expand...
Click to collapse
Hmm strange My GPS is fine, locks on in like 5 secs, maybe try rebooting with GPS switched on, if you haven't already done so.
DJD,
No real benefits apart from getting rid of any tmobile crap, there isn't much bloatware in the tmobile uk build anyways. I just like generic lol. And as for rooting - please tell me that question is joke surely as a seasoned veteran you know what that is geezer
I know rooting opens up a world of goodies but there arent any goodies for this phone yet in the way of ROMS, at least thats what i can gather so far lol. Can it be over clocked and JITenabled yet? after rooting it of course, sorry im being lazy n not google-ing lol.
Plus for my totally blonde moment if i flash the generic uk firmware would it still mean i could get the over the air 2.2 update when it is released by motorola before t-mobile release their bloatware version?
dj_destruction said:
I know rooting opens up a world of goodies but there arent any goodies for this phone yet in the way of ROMS, at least thats what i can gather so far lol. Can it be over clocked and JITenabled yet? after rooting it of course, sorry im being lazy n not google-ing lol.
Plus for my totally blonde moment if i flash the generic uk firmware would it still mean i could get the over the air 2.2 update when it is released by motorola before t-mobile release their bloatware version?
Click to expand...
Click to collapse
JIT can be enabled - its not stable imo - I tried it before, gonna have a better look at it.
i would expect you will be able to get the generic 2.2 update, to be fair, I think we will be flashing roms by that time anyways
Anyway stop being a ***** and get it rooted
OI lol,
Just downloaded z4root will put it on my memory card n get root tomorrow me thinks.
p.s z4root is no longer on the market, found the z4root.apk in a thread on here tho luckily lol.
Ok, now I do have a problem. I've flashed the non-branded rom and very happy with it, but my in-call speaker has failed this morning. This seems to be a common problem with the Defy and I suspect it needs replacing or repairing, but I need to put back the branded rom to have the phone in warranty, don't I? How do I even begin to go about that?
tim440 said:
Ok, now I do have a problem. I've flashed the non-branded rom and very happy with it, but my in-call speaker has failed this morning. This seems to be a common problem with the Defy and I suspect it needs replacing or repairing, but I need to put back the branded rom to have the phone in warranty, don't I? How do I even begin to go about that?
Click to expand...
Click to collapse
You can't unless you can find the vodafone .sbf sorry mate it was mentioned at the top of the post.
They probably wouldn't know anyway, just deny all knowledge if they say anything.
So it seems like we'll need to fight over at the Microsoft forums if we're to try to stay up-to-date. I need you to contribute to my post over at msdn here: http://forums.create.msdn.com/forums/p/78753/476964.aspx#476964
Maybe if enough of us hit'em, we can get some kind of answer. Dev phones should have been the first to be updated.
Still no updates for Taylor.
It says in the forums that you linked to that there will be no updates for the Samsung Taylor phones.
the92playboy said:
It says in the forums that you linked to that there will be no updates for the Samsung Taylor phones.
Click to expand...
Click to collapse
Seems like there won't be and update for LG Panthers either.
Anyone wanna trade for an Android device?
Might be a newb question here but....
Did people have to pay for these developer phones? Or did MS just send them out to registered/respected developers?
I suppose, you can flash your phone with the Omnia 7/Quantum ROM at your own risk.
the92playboy said:
Might be a newb question here but....
Did people have to pay for these developer phones? Or did MS just send them out to registered/respected developers?
Click to expand...
Click to collapse
Yup, Microsoft just sent them out.
day2die said:
I suppose, you can flash your phone with the Omnia 7/Quantum ROM at your own risk.
I would like to give th Quantum ROM a try , but I do not know where to start. I am a Bell user in Canada so I think they have the Quantum. I used to flash old WM and Android Devices all the time, but WP7 is new to me. Anyone have a thread or no if anyone has sucessfully flashed a LG Panther to anything else? I can get into a bootloader, but it is probably just Microsofts bootloader.
Click to expand...
Click to collapse
NevinM said:
day2die said:
I suppose, you can flash your phone with the Omnia 7/Quantum ROM at your own risk.
I would like to give th Quantum ROM a try , but I do not know where to start. I am a Bell user in Canada so I think they have the Quantum. I used to flash old WM and Android Devices all the time, but WP7 is new to me. Anyone have a thread or no if anyone has sucessfully flashed a LG Panther to anything else? I can get into a bootloader, but it is probably just Microsofts bootloader.
Click to expand...
Click to collapse
Looks like it's really possible, because i succesfully connected to the phone using QXDM, and even downloaded NAND's image (it's raw, so for extracting page size required, because size in the partition table is relative to page size). Though may flash it, i think bootloader will work. But you probably can get bricked device. Unfortunally i have no enough time for explorations.
Click to expand...
Click to collapse
Useless guy said:
Looks like it's really possible, because i succesfully connected to the phone using QXDM, and even downloaded NAND's image (it's raw, so for extracting page size required, because size in the partition table is relative to page size). Though may flash it, i think bootloader will work. But you probably can get bricked device. Unfortunally i have no enough time for explorations.
Click to expand...
Click to collapse
I think flashing the unbranded Optimus 7 ROM would be the best bet for us. There is a registry key named "HasKeyboard" that's defaulted to 0 that we can change to 1. That might be the way to go. Also I'm wondering if we'd have to go the goldcard method to move over to a Quantum or Optimus rom.
The problem is I don't have another phone and there's no MTTY process to unbrick our phones so I'm a little hesitant to try.
fb401 said:
Useless guy said:
I think flashing the unbranded Optimus 7 ROM would be the best bet for us. There is a registry key named "HasKeyboard" that's defaulted to 0 that we can change to 1. That might be the way to go. Also I'm wondering if we'd have to go the goldcard method to move over to a Quantum or Optimus rom.
The problem is I don't have another phone and there's no MTTY process to unbrick our phones so I'm a little hesitant to try.
Click to expand...
Click to collapse
Goldcard isn't required. Only HTC devices require it.
I've dumped my ROM, so if bootloader will work (i hope), device can be easily flashed.
Is anyone wanna to try? QPST can flash certain partitions (looks like only dsp1 and efs are required for succesful update). Unfortunally i can't risk my phone, because i'm developing an application.
Click to expand...
Click to collapse
Not being rude, but are people complaining that a phone that they received for free is not getting the update and not being continued? If you never paid anything for it in the first place, what are you out then?
the92playboy said:
Not being rude, but are people complaining that a phone that they received for free is not getting the update and not being continued? If you never paid anything for it in the first place, what are you out then?
Click to expand...
Click to collapse
Not every got it free.
Me to...
I am not sure if it is worthwhile attempting a flash. The problem is we are all developers and having no device is probably not worth the risk. I have not flashed anything WP7 so I am pretty hesitant. Is this the link to flashing info you guys are considering?
http://forum.xda-developers.com/showthread.php?t=935605
In reading the other threads, there is no real confirmation on the Panther not getting updated. It is clear the the Taylor will not. I am curious if we are running the exact ROM that another device is? If so, ROM from those devices may work. I am trying to remember what the download name was (was it Pacific or something?). I deleted the file. If I still had it I would consider giving flashing a try. I wish Microsoft had not shut down the microsoft connect site for these phones. Any thoughts?
the92playboy said:
Not being rude, but are people complaining that a phone that they received for free is not getting the update and not being continued? If you never paid anything for it in the first place, what are you out then?
Click to expand...
Click to collapse
I got mine off of eBay due to it being the best keyboard phone out at the time (the Quantum is a joke), so it wasn't free for me. Once we get a HTC 7 Pro here that's compatible with AT&T's 3G bands, I'll switch over to that.
NevinM said:
I am not sure if it is worthwhile attempting a flash. The problem is we are all developers and having no device is probably not worth the risk. I have not flashed anything WP7 so I am pretty hesitant. Is this the link to flashing info you guys are considering?
http://forum.xda-developers.com/showthread.php?t=935605
In reading the other threads, there is no real confirmation on the Panther not getting updated. It is clear the the Taylor will not. I am curious if we are running the exact ROM that another device is? If so, ROM from those devices may work. I am trying to remember what the download name was (was it Pacific or something?). I deleted the file. If I still had it I would consider giving flashing a try. I wish Microsoft had not shut down the microsoft connect site for these phones. Any thoughts?
Click to expand...
Click to collapse
I was thinking more the Europe Open Optimus 7 rom here: http://forum.xda-developers.com/showthread.php?t=935578
Like you said, I can't be without a device so I'm really hesitant to try flashing
Well there is going to be a point where and update or feature will make our phones aka gw910 or Taylor completely useless as for development or testing, so this is something to consider.
Yeah connect has been down since a long time ago I have been struggling to find the FW file provided in the msdn/connect/internet forums, I’m guessing the only way now is to contact either a developer/evangelist/god/msdn who has that file available in storage, with the firmware we can create our own updated custom FW way easier than creating one from scratch and/or experiment with other FW like the optimus 7/Q.
And idea can we consider spoofing the gw910 to an optimus 7/Q .7004 using the registry editor? Making ZUNE update just the components needed.
also im willing to give it a go flashing mi gw910 UsellesGuy any info on how can i dump mi firmware. and posible explanation as in how to recover.I read the bootloader post before but is there anything else i need ?
dragoxt said:
Well there is going to be a point where and update or feature will make our phones aka gw910 or Taylor completely useless as for development or testing, so this is something to consider.
Yeah connect has been down since a long time ago I have been struggling to find the FW file provided in the msdn/connect/internet forums, I’m guessing the only way now is to contact either a developer/evangelist/god/msdn who has that file available in storage, with the firmware we can create our own updated custom FW way easier than creating one from scratch and/or experiment with other FW like the optimus 7/Q.
And idea can we consider spoofing the gw910 to an optimus 7/Q .7004 using the registry editor? Making ZUNE update just the components needed.
also im willing to give it a go flashing mi gw910 UsellesGuy any info on how can i dump mi firmware. and posible explanation as in how to recover.I read the bootloader post before but is there anything else i need ?
Click to expand...
Click to collapse
Microsoft delivers updates using binary patches, they apply only to concrete file version, else they will be broken (or updating will be failed).
Thank you, but i think better way is to wait a bit, until situation about updates will clear up. If update will be not received - i'll begin my work
Useless guy said:
Microsoft delivers updates using binary patches, they apply only to concrete file version, else they will be broken (or updating will be failed).
Thank you, but i think better way is to wait a bit, until situation about updates will clear up. If update will be not received - i'll begin my work
Click to expand...
Click to collapse
On twitter I've tired contacting @winphonesupport as far as our phones being updated. They replied: "Let us see if our team knows and we'll get back to you. ^EB"
I haven't gotten another answer back yet. I doubt I'll get one at all honestly.
quick question about updating a developer device
Hi
I'm a complete newby about wp7.
I've two Optimus 7 in my possession that seem to be developer devices.
Here the phones info:
OS Version: 6516Mainline
SW Version: LG-E900AT-00-V08d-ORG-UK-JUL-24-2010
HW Version: E
More info:
OS Version: 6516Mainline (buildlab).20100713-1228
Firmware revision number: 0.8.4.10
Hardware revision number: 0.1.5.0
Bootloader version: 1.4.1.0
Chip SOC version: 0.30.2.0
Now I've tried to update the firmware like in this post:
http://forum.xda-developers.com/showthread.php?t=935578
But it doesn't work (LGDP2 connect to phone start the update but give the error 1002)
Is there a way to flash these phones to be like normal phones? (I don't intent to develop on them) Or my hardware version is to old (prototype)
Thanks for the help
fb401 said:
I think flashing the unbranded Optimus 7 ROM would be the best bet for us. There is a registry key named "HasKeyboard" that's defaulted to 0 that we can change to 1. That might be the way to go. Also I'm wondering if we'd have to go the goldcard method to move over to a Quantum or Optimus rom.
The problem is I don't have another phone and there's no MTTY process to unbrick our phones so I'm a little hesitant to try.
Click to expand...
Click to collapse
so you are relying on a dev phone that MS was gracious enough to give you as your only device and are complaining that you didn't get the update???
edit: after reading your replies, this wasn't a publicly released phone, so if you don't get the updates, I don't feel you have a complaint.
I tried to update my G2x yesterday via the LG updater tool. Long story short, it froze on the S/W Updating screen and neither T-Mo or LG support could assist in getting it fixed.
I read that it was pretty hard to brick the G2x so I decided to give it an all out effort to resurrect it, especially after the T-Mobile tier two tech support told me there was nothing that could be done, if what he had tried didn't work, the phone was toast. I am just a woman who is more technical than the average woman my age, but I don't mod my phones much in general. I tweak.
I will list what all I have tried, as much in order as I can recall since starting this Friday at noon, don't laugh! (oh the phone is currently working, only 3g and with this Wind ancient looking version)
Flashed CWM on phone (tried all versions at some point in the process)
Totally cleared phone
Tried KDZ_FW_UPD_EN.exe to flash V21E_00 and V21Y_00 Neither would work
Flashed Cyanogenmod 7.1.0.1 Worked, looked beautiful, wifi but no cell service, no baseband, no IMEI
Flashed kdz WIND V11h - everything working but only at 3g
I thought if I got back to something that would put back in a baseband and my IMEI, I could find my way back to the most current update. I can't seem to flash anything new though.
I've tried this :http://forum.xda-developers.com/newthread.php?do=newthread&f=1149
and this : http://forum.xda-developers.com/showthread.php?p=25321356
Both awesome and helpful posts but I can't get anything other than this V11h!!
Help! And thanks! And I am sorry if this seems ridiculously easy, I think my brain quit working about 6 hours ago!
Oh, my question is, how do I go about getting it at least back to where it was? (Never updated from stock, March of 2011)
Model Number
LG-P999
Android version
2.2.2
Baseband version
M6600A-SCAUTNZ-2.0.9720T 1[JUN 05
2011 04:00:00] MP:TRULGE_08.09.02R_MDM
Kernel version
2.6.32.9
Build number
FRG83G
Software Version
LG-P999-AWC-V11h
I'm by no means an expert -- an advanced amateur, maybe -- but I'll do my best.
What exactly were you trying to update when you bricked the phone? You said you were using the LG updater tool, but what exactly were you trying to do? Was your phone already rooted prior to the attempted update? Had you made any modifications to your phone or were you running stock? That may help us get to the root of your problem.
Are you still able to get into the S/W update screen using the directions in the PDF you attached? (Ie: if you remove the battery, hold both volume buttons, and then plug in the USB, does your phone turn on and go into software update mode?) If you can get it into this mode, you should be able to flash the stock TMobile ROM using NVFlasher as in this thread:
http://forum.xda-developers.com/showthread.php?t=1056847
This may get you back to step one, and you can try again. Or maybe at that point, someone more knowledgeable will come around with better advice.
Good luck.
Thanks for your quick reply!
I was trying to uh...update to 2.3.4 Gingerbread to hopefully help resolve some minor but longstanding issues I had had with my phone. Mainly, the random reboot and powering off I was really getting sick of.
My phone was not rooted prior to this. I was running stock.
Yes, I can still get into the S/W updater screen following the instructions in the .pdf I posted.
And funny you should post this thread: http://forum.xda-developers.com/show....php?t=1056847
That is where I originally started when my phone first froze. I have tried to flash to stock using the NV flasher right before I posted the original question. It didn't do a thing and that's when I threw my hands up and decided I needed help!
Rudds1972 said:
That is where I originally started when my phone first froze. I have tried to flash to stock using the NV flasher right before I posted the original question. It didn't do a thing and that's when I threw my hands up and decided I needed help!
Click to expand...
Click to collapse
heh... I can totally relate to throwing your hands up. I just started tinkering with my phone a couple of months ago, and the first night, I spent from 10:00pm until about 5:00am just trying to get Cyanogenmod installed. It was frustrating, but after a lot of reading and re-trying, I finally got it to work.
Okay, when you run NVFlasher, do you get any messages at all? Once you click one of the buttons to flash the phone, I believe a DOS window should popup showing you the status of the flash, whether there are errors while flashing or if it completed successfully. If there are errors, be sure you have the proper APX driver installed, which should be included with the NVFlasher package. What OS are you using on your PC? Windows XP? 7? When you have the phone plugged into the USB and the S/W update screen is showing, you should see "'NVIDIA USB Boot-recovery" listed in your windows device manager.
lol...10pm to 5am eh? Sounds like me, I was (sounds crazy) noon Friday until 2am Sat and started up again around 9am and well...here I sit at 3 am my time, with a few breaks thrown in!
When I run NV flasher, it all goes smoothly. It looks totally complete, no errors. And I am familiar with the errors, the first few hours I had nothing but errors and dead ends. I have the proper APX driver for sure, I thankfully, run XP on this computer. And yes to the "'NVIDIA USB Boot-recovery" listed in your windows device manager. "
Scratching your head like me? I don't want to do Cyanogenmod again, which is what I am tempted to do, thinking now that I have the baseband back, the cell phone service would work. I really just want my phone back the way it was, albeit, updated..ok, so not exactly the way it was!
Currently on phone, so no links. But in other lg device forum on xda there is the "offline updater method" of kdz flashing. It tricks lg updater into using a custom kdz and not to check online. Look for v21y.kdz and use that. Its 2.3.4.
If you can get it working with the old wind mobile rom all you have to do is use the official lg tool from their website and it will update to the latest version for you I had the same problems you are talking about and the only thing I could get to work was the lg offline update tool and flashing the old wind mobile rom after i got that working just went to lg and used their program and it updated me to new baseband an 2.3.4.
http://forum.xda-developers.com/showthread.php?p=25116859
This is what you will have to do. It took me a while to figure it out. But when you have the programs and files you need all downloaded and setup it works without being online. It worked for me once I figured it out. I had to read it a few times and do some searching for all the files but they are out there. If you do not find them via this site Google it. Good luck.
Sent from my LG-P999 using xda premium
Done! Thank you all!!
Rudds1972 said:
Done! Thank you all!!
Click to expand...
Click to collapse
Awesome! What finally worked for you?
Hmmm...can I even remember?? My brain is still swimming in downloads and error messages!
I had tried the offline updater earlier, but the "Automatic Offline Procedure.vbs" file never would load, I kept getting an error on line 25. I downloaded it all again from other links, and this time I thought it would go through but I kept getting an error at line 70 something.
I finally read "instruction.docx" (the steps that the vbs file was going to have me follow) lol
I turned the windows enabler to the ON position.
I also disabled my LG modem first as I had read that on the .pdf file I posted earlier and it had allowed me to get Wind on there.
I disabled my firewall and anti virus temporarily also.
I opened the UpTestEX_mod2_marwin.exe set it to "3GQCT" and "EMERGENCY" and chose the V21y kdz
I hit "Normal web upgrade test"
Then start upgrade or something and the LG updater tool opened, it found my phone, I think I pressed Start upgrade or whatever again, waited, held my breath too long, passed out, woke up VOILA! DONE!
That is a VERY rough translation of what I did, I have had so many trial and error attempts and variations of settings, files etc, that I don't know what really finally worked! But thank you for your encouragement last night, because I was really about to give up for good (thus the last ditch "when all else fails ASK for help" post) and throw not only my hands up, but the phone across the room!
Now I am finally getting around to re loading my apps and all my settings, ringtones, etc etc etc. I don't know if I now love or hate my G2x!
Thanks to everyone for their replies! And everyone else who posts here and helps so many novices like me!
Glad to hear your back up and running.
Sent from my LG-P999 using xda premium
No Luck
I have literally tried everything I could possibly think of to get v11h updated to v21e or even v21y and nothing is working for me. I am stuck at the part where the phone begins to update, but disconnects at param(5) and then fails after that. I have tried every method and tutorial that I could find and I am still searching. Any help would be most appreciated. Thanks!
Zachariah_Apo said:
I have literally tried everything I could possibly think of to get v11h updated to v21e or even v21y and nothing is working for me. I am stuck at the part where the phone begins to update, but disconnects at param(5) and then fails after that. I have tried every method and tutorial that I could find and I am still searching. Any help would be most appreciated. Thanks!
Click to expand...
Click to collapse
Go to my post and follow the instructions:
http://forum.xda-developers.com/showthread.php?t=1601918
I haven't tried it yet but as soon as I do I'll reply back and tell you the results thank you.
On a side note I got tired of the g2x plague and bought a new phone hahaha I still want to fix my g2x though...
Sent from my SAMSUNG-SGH-T989 using XDA
Does v21y work on wind mobile Canada? Having major connection issues and thinking I'll run the kdz method with v21y to see if that fixes things. Gonna do it tonight so if any kind soul sees this post and know the answer could you pm me please. A big thanks in advance
kylereid said:
Does v21y work on wind mobile Canada? Having major connection issues and thinking I'll run the kdz method with v21y to see if that fixes things. Gonna do it tonight so if any kind soul sees this post and know the answer could you pm me please. A big thanks in advance
Click to expand...
Click to collapse
It works. Running it now on wind.
tahahawa said:
It works. Running it now on wind.
Click to expand...
Click to collapse
Hello there I need your help Im with wind too and been trying all methods to upgrade to new basbabnd with no luck i dunno if its me or it is hard to do .. can you plz help I followed the instruction using the fake LG upgrade tool and dowloaded the V21Y . KDZ and tried to upgrade and never works
HELLLPPP lol
yoos1980 said:
Hello there I need your help Im with wind too and been trying all methods to upgrade to new basbabnd with no luck i dunno if its me or it is hard to do .. can you plz help I followed the instruction using the fake LG upgrade tool and dowloaded the V21Y . KDZ and tried to upgrade and never works
HELLLPPP lol
Click to expand...
Click to collapse
I ended up buying a new phone cause I couldn't figure it out. I've tried every method with no luck. The phone just doesn't want to take the update for whatever reason. Other G2x I've tried worked but for some reason not the one I own. Hahaha
Try these links see if you can figure something out. http://forum.xda-developers.com/showthread.php?t=1339272 http://forum.xda-developers.com/showthread.php?t=1619932
Sent from my SAMSUNG-SGH-T989 using xda premium
No luck installing the March 2012 baseband
Rudds1972 said:
Hmmm...can I even remember?? My brain is still swimming in downloads and error messages!
I had tried the offline updater earlier, but the "Automatic Offline Procedure.vbs" file never would load, I kept getting an error on line 25. I downloaded it all again from other links, and this time I thought it would go through but I kept getting an error at line 70 something.
I finally read "instruction.docx" (the steps that the vbs file was going to have me follow) lol
I turned the windows enabler to the ON position.
I also disabled my LG modem first as I had read that on the .pdf file I posted earlier and it had allowed me to get Wind on there.
I disabled my firewall and anti virus temporarily also.
I opened the UpTestEX_mod2_marwin.exe set it to "3GQCT" and "EMERGENCY" and chose the V21y kdz
I hit "Normal web upgrade test"
Then start upgrade or something and the LG updater tool opened, it found my phone, I think I pressed Start upgrade or whatever again, waited, held my breath too long, passed out, woke up VOILA! DONE!
....
Click to expand...
Click to collapse
What does "disabling the LG modem" mean?
I have a Wind P999 phone with the V11h base band. Of course, the LG updater tool says that I have the latest baseband.
I tried updating using the KDZ tool but that did not work. for me.
I tried pushing a T-mobile Stock Rom too. It did not updated the baseband. LG tool still says I have the latest update.
I have also tried the hack of using the LG Updated with a local shttp server. But even then, when I pressed the "Normal web upgrade test" and "Start update" nothing happens.
Am I supposed to get some feedback while the upgrade happens? How long does this process take?
I am using Window 7 Ultimate 64-bit. All antivirus disabled.
Anything else I could try?
BTW, I have been able to revive a bricked p999 T-Mobile phone that I got from Ebay. it has the stock T-MObile Rom with the March 2012 baseband and software version v21y. This Wind phone is just testing me
hubrisnxs said:
I had a bad feeling when it updated yesterday hours after I got this for att.
Would it be safe to assume the root images for e, which I believe I had, will soft brick my phone? Thanks, please help, etc
Click to expand...
Click to collapse
That was me posting in the wrong forum, asking what I can imagine sounds like the height of stupidity. To be clear, this is a replacement phone because I (quite stupidly) grabbed the root img for the PR or whatever in the att dev thread... And got a soft brick. This time, I turn on phone, it updates to g immediately.
In Lg phone connection app on Windows 10, it is saying that another update is available, so I'm hoping...
Btw I do know adb pretty well and can offer up a clean stock H81010g img pretty easily, if it'd help and maybe someone can help me.
It's the only phone I want, and to find myself unable to root robs me of 90% of my work and paid for apps.
hubrisnxs said:
That was me posting in the wrong forum, asking what I can imagine sounds like the height of stupidity. To be clear, this is a replacement phone because I (quite stupidly) grabbed the root img for the PR or whatever in the att dev thread... And got a soft brick. This time, I turn on phone, it updates to g immediately.
In Lg phone connection app on Windows 10, it is saying that another update is available, so I'm hoping...
Btw I do know adb pretty well and can offer up a clean stock H81010g img pretty easily, if it'd help and maybe someone can help me.
It's the only phone I want, and to find myself unable to root robs me of 90% of my work and paid for apps.
Click to expand...
Click to collapse
If you're on 10g, follow this link.. its has 10g rooted image with right flash-able code...download those tar file, extract to get an image for placed in your internal memory...
make sure to backup your system 1st..There's a guide on 2nd post on that thread.
hopefully this will help out some people and the developers to make,fix,restore a not so popular phone. I did a total firmware dump and have uploaded to my 4shared folder. If anyone is interested or can tell me how to upload it here for developing i will be more than happy to share with those in need. I also have a spare phone that i would be willing to test anything made from the firmware dump i created.
PLEASE link?
Some time after rooting my Optimus Zone 3 VS425PP, I got locked into a boot loop. There are no custom ROM's, neither recovery nor OS. It's not bricked. Yet, anyway. The loading screen functions, then a little window that says "OPTIMIZING APPS 1 OF 5, PLEASE DO NOT REMOVE THE BATTERY..." appears. I've seen this before, but now, upon reaching "APP 5 OF 5," it reboots and repeats. I've tried several factory resets via the LG RECOVERY (MODIFIED,) as well as safe mode to no avail. Anyone? Anything? Help? The only recourse I can think of would be to re-flash the stock ROM, which I cannot find. Anywhere. Thanks, guys.
i tried contacting judthro for the same file; no luck
Cruise Elroy said:
Some time after rooting my Optimus Zone 3 VS425PP, I got locked into a boot loop. There are no custom ROM's, neither recovery nor OS. It's not bricked. Yet, anyway. The loading screen functions, then a little window that says "OPTIMIZING APPS 1 OF 5, PLEASE DO NOT REMOVE THE BATTERY..." appears. I've seen this before, but now, upon reaching "APP 5 OF 5," it reboots and repeats. I've tried several factory resets via the LG RECOVERY (MODIFIED,) as well as safe mode to no avail. Anyone? Anything? Help? The only recourse I can think of would be to re-flash the stock ROM, which I cannot find. Anywhere. Thanks, guys.
Click to expand...
Click to collapse
Unfortunately, I don't think this file is actually out there. I have REALLY been looking, even contacted the LG Development team. The LG Support Tool, etc. are not going to help you yet as they do not have the firmware on their servers yet. That's why the LG Support Tool will freeze when trying to do an Update Recovery on this phone. -- And I've tried them all: LG Mobile Support Tool, LG PC Suite, Verizon VS425PP Update Tool (from the mounted drive on the phone), LG Flash Tool 2014 to force different KDZ files. All provide nothing. All dead ends. The Optimus won't grab a COM unless it is the right signed firmware for the phone. You'll just sit there in Download Mode or in Debug mode forever with no result. We have to wait for the first update from LG from version VS425PP1 to whatever comes next so they have something to stick on their server. But...if you find something before then, please let me know! The update will eventually be released to the public. It'll probably just take a year or so.
Good thing is Wal-Mart sells these for under $12 (yes, that's right). I picked up seven of these quad-core bad boys at that deal. Just bugs the hell out of me I can't fix the one I over rooted.
this *might* be promising...
Cruise Elroy said:
Some time after rooting my Optimus Zone 3 VS425PP, I got locked into a boot loop. There are no custom ROM's, neither recovery nor OS. It's not bricked. Yet, anyway. The loading screen functions, then a little window that says "OPTIMIZING APPS 1 OF 5, PLEASE DO NOT REMOVE THE BATTERY..." appears. I've seen this before, but now, upon reaching "APP 5 OF 5," it reboots and repeats. I've tried several factory resets via the LG RECOVERY (MODIFIED,) as well as safe mode to no avail. Anyone? Anything? Help? The only recourse I can think of would be to re-flash the stock ROM, which I cannot find. Anywhere. Thanks, guys.
Click to expand...
Click to collapse
well i'll be. this may be a promising link:
google "4share lgvs425pp" and scroll down to the 4shared link. There is a 999MB RAR file claiming to be the VS425PP ROM dump. I'm downloading it now...checking it out.
It works???!!! i have to root this cellphone because i need use with other company...
its not super useful yet
johhnyapplefake said:
well i'll be. this may be a promising link:
google "4share lgvs425pp" and scroll down to the 4shared link. There is a 999MB RAR file claiming to be the VS425PP ROM dump. I'm downloading it now...checking it out.
Click to expand...
Click to collapse
hopefully the op will chime in for insight. The 999MB isn't much good. It appears to be a RAR dump of all the partitions, perhaps made from a lglaf.py script while in download. Nevertheless, i havent found any way yet to push the firmware dump onto the phone.
I've had no luck, either.
johhnyapplefake said:
hopefully the op will chime in for insight. The 999MB isn't much good. It appears to be a RAR dump of all the partitions, perhaps made from a lglaf.py script while in download. Nevertheless, i havent found any way yet to push the firmware dump onto the phone.
Click to expand...
Click to collapse
Meanwhile, as my LG cycles endlessly through my really cool "Jolly Roger" boot animation, I stumbled across a Kyocera Hydro Wave at Walmart for $20. I snapped it up to replace the LG Optimus Zone 3. I had big plans to root it, too., but I should've researched it first. The specs are great... but one check on Cyanogen's website probably would've saved me some trouble. Not one Kyocera device is listed there. XDA thread also throws red flags-no one can get root to stick. Well, I at least learned a lesson. Next time, I plan to purposefully buy a phone that can be rooted, has been rooted, has instructions online to do so, AND has at least one custom ROM available! No wonder this thing was $20! Keep us all posted if you stumble across a bootloop fix of some kind, and I'll do the same.
here is stock recovery for this device https://www.dropbox.com/home/Apps/Flashify/VS425PP/recovery
matt4787!
Either I am unable to open that link from an Android device OR the link given is to an unshared folder? It just asks me to log in and then says 'that folder does not exist in your DropBox...' PLEASE check out the SHARE link from within your DropBox and maybe share a new folder (and drop the stock ROM in there, along with what you might've used to flash it maybe?) We'd be very grateful!
Recovery
https://drive.google.com/file/d/0B1Nk8cx3_QgAeGNxZ1JrUmtFS0E/view?usp=drivesdk
Try now
hope my post helped some ppl. now to get twrp recovery ported here.
Thank you matt4787!!
Sent from my C6740 using XDA-Developers mobile app
To all who have a bricked,phone this phone has an update. Download the LG software assistant and put assistant in repair mode then boot phone normally and wait a bit. Run the repair assistant and let it run. Hopefully if everything runs well as it did me. Mine is restored and running.
Just ordered one. Is there root for this phone? Unlocked bootloader or forgetaboutit?
I rooted this phone and then tried to de-bloat, but I must have deleted too much. Now when I boot all I get is "Security Error - Authentication Fail #9"
I can get to Download mode, but none of the recovery programs recognize the phone. I installed the drivers, but still nothing. Is there anything I can do?
matt4787 said:
To all who have a bricked,phone this phone has an update. Download the LG software assistant and put assistant in repair mode then boot phone normally and wait a bit. Run the repair assistant and let it run. Hopefully if everything runs well as it did me. Mine is restored and running.
Click to expand...
Click to collapse
was your phone in a "security error" loop? for some reason the software assistant won't recognize my phone. it'll identify a plugged in phone when I connect it in download mode, but the device model never shows up
nikicollazo said:
was your phone in a "security error" loop? for some reason the software assistant won't recognize my phone. it'll identify a plugged in phone when I connect it in download mode, but the device model never shows up
Click to expand...
Click to collapse
i forgot to mention that you have to be in download mode to make the assistant recognize the phone. plus make sure the drivers for the phone are installed on your pc
matt4787 said:
i forgot to mention that you have to be in download mode to make the assistant recognize the phone. plus make sure the drivers for the phone are installed on your pc
Click to expand...
Click to collapse
hello as you did to install the drivers , I find no way to reconnoitre the mtp device ! Thank you
angelgabg said:
hello as you did to install the drivers , I find no way to reconnoitre the mtp device ! Thank you
Click to expand...
Click to collapse
this one is troubling. hmm you got the stock rom from lg? if so then try downloading the drivers from verizon.
Any updates on recoveries? I hate being scared of tweaking due to not having a backup .-. Anyone find something? Plz lemme know, thx! Btw kingo root 4.5 seems to have root for this phone but super sume seems to brick it. Just a heads up eace: