This is an unofficial port of TWRP Recovery for the Oppo F1F on Project Spectrum Bootloader. Much Thanks and credit goes to the TWRP team, Lineage team, and brinleyaus for making this possible. This will allow flashing of modification zips (eg. supersu, magisk, xposed, etc) over the top of Project Spectrum or flashing spectrum based ROMS.
Instructions:
Already running Project Spectrum
- If you haven't already unlocked you bootloader you will need to go into SETTINGS > ABOUT PHONE and tap BUILD NUMBER 7 times to unlock DEVELOPER OPTIONS, Then go into SETTINGS > DEVELOPER OPTIONS and enable them, also enable ADB DEBUGGING and OEM UNLOCK. Now reboot into fastboot (adb reboot bootloader) and run fastboot oem unlock.
- Install this image file through fastboot (If you are unsure of this step follow one of the many tutorials about installing TWRP through fastboot)
On ColourOs with TWRP
- Do a full wipe first or the install will fail. (In TWRP hit WIPE then swipe to factory reset.) Do a backup first as you will lose data.
- Flash this zip file through twrp and then hit "wipe dalvic and cache", then hit HOME then REBOOT then RECOVERY. (rebooting to the new recovery will ensure the recovery sticks) then Flash any Spectrum based rom or restore any Spectrum based backup. NOTE the ColorOs system and boot.img will still be there but wont boot so you MUST flash or restore a Spectrum based rom before you reboot to system.
Reserved.
MiniBlu said:
Reserved.
Click to expand...
Click to collapse
Battery can't charge full!! Help ?
Added file and instructions to OP to flash Spectum bootloader,firmware and twrp From ColorOs TWRP.
Thank.link from androidfilehost is slowly. I using wifi
Sent from my F1w using XDA-Developers Legacy app
MiniBlu said:
Added file and instructions to OP to flash Spectum bootloader,firmware and twrp From ColorOs TWRP.
Click to expand...
Click to collapse
The TWRP is not the 3.1.1
It is the 3.0.1
khannz7 said:
The TWRP is not the 3.1.1
It is the 3.0.1
Click to expand...
Click to collapse
Which file are you talking about, I just checked the links and the flashable zip was actually pointing to the full ROM which defiantly has the 3.1.1-0 version. (I just fixed the link to point at the bootloader, firmware and twrp zip.) Are you rebooting to recovery after flashing to make it stick?
MiniBlu said:
Which file are you talking about, I just checked the links and the flashable zip was actually pointing to the full ROM which defiantly has the 3.1.1-0 version. (I just fixed the link to point at the bootloader, firmware and twrp zip.) Are you rebooting to recovery after flashing to make it stick?
Click to expand...
Click to collapse
The PS 1
Yeah doing it right....But it is the same old twrp 3.0.1 mentioned somewhere in the G+ forums....
Never mind ....did you get the port to work
khannz7 said:
Yeah doing it right....But it is the same old twrp 3.0.1 mentioned somewhere in the G+ forums....
Never mind ....did you get the port to work
Click to expand...
Click to collapse
Which ps1 g or zip?
I have just checked. None of the files I have posted are the old version. They are all the newest 3.1.1-0 version.
No not yet.
MiniBlu said:
I have just checked. None of the files I have posted are the old version. They are all the newest 3.1.1-0 version.
No not yet.
Click to expand...
Click to collapse
I have installed the full ps rom with twrp but what I got is not 3.1.1 it is the 3.0.1
+
Maybe I could help you somewhere with the port
I have to remove the sd card and then re-insert it then it received. who can solve it? The battery will charge too long to fill up
khannz7 said:
I have installed the full ps rom with twrp but what I got is not 3.1.1 it is the 3.0.1
Click to expand...
Click to collapse
OK, I'll download it and check, maybe I uploaded from the old folder. Hope not 6.5 hours to upload it.
MiniBlu said:
OK, I'll download it and check, maybe I uploaded from the old folder. Hope not 6.5 hours to upload it.
Click to expand...
Click to collapse
I would love to help you with the port and maybe I could get something new to learn:fingers-crossed:
Phucan2017 said:
I have to remove the sd card and then re-insert it then it received. who can solve it? The battery will charge too long to fill up
Click to expand...
Click to collapse
No one. If you don't like it stick with ColorOs or Lineage.
khannz7 said:
I would love to help you with the port and maybe I could get something new to learn:fingers-crossed:
Click to expand...
Click to collapse
Not just yet, just got to work out the ramdisk changes needed to get ported roms to boot properly with spectrum kernel, then I'll share the info with you and then let the porting begin.
MiniBlu said:
No one. If you don't like it stick with ColorOs or Lineage.
Not just yet, just got to work out the ramdisk changes needed to get ported roms to boot properly with spectrum kernel, then I'll share the info with you and then let the porting begin.
Click to expand...
Click to collapse
Cool
I did that. But for oppo f1 this rom is not finished yet but there are still many bugs. I return coloros
Just used the spectrum zip and worked flawlessly.(from other thread oops) Thanks alot.
How to go back to coloros ? Do i need to flash stock recovery ?
Sent from my F1f using XDA Labs
the_reds2000 said:
How to go back to coloros ? Do i need to flash stock recovery ?
Sent from my F1f using XDA Labs
Click to expand...
Click to collapse
No, Read the OP of this thread. There is a zip (and instructions) to return to ColorOs Bootloader,firmware and TWRP. From there you can flash any TWRP flashable ColourOs based Rom (ColorOs or LineageOS) or restore backups from them.
Which root method will be used for this?
Related
DISCLAIMER: I AM NOT LIABLE TO ANY DAMAGE THAT HAPPENS TO YOUR DEVICE BECAUSE OF DOING ANYTHING WRONG.
MOTO G4 PLUS [XT1643]
This is for those who had flashed a custom kernel on their stock ROM and now want to revert to stock.
REQUIREMENTS:
1. TWRP 3.0.3-n2 by @Shreps .
https://forum.xda-developers.com/mo...covery-twrp-3-0-2-r3-moto-g4-g4-plus-t3494337
This one is more updated/maintained than the official 3.0.2 version.
2. 7Zip Compression Utility:
Download and install on your PC. I use this as it gives the maximum ultra level compression. See Downloads below.
PROCEDURE:
1. Download and extract the TWRP.7z using 7Zip.
2. Place the TWRP folder it in the root directory of your INTERNAL STORAGE.
2. Just reboot TWRP once and choose Restore and then choose this: athene_93-14_boot
3. Swipe to restore.
NOTE: As a general recommendation for all zip installations and backup/restore using twrp, Wipe Cache and ART Cache before you Reboot to System.
4. You're DONE
DOWNLOADS:
Google Drive Link for the file:
https://drive.google.com/open?id=0B25DpDahxm52MDlBRlVqNElkaUE
7-ZIP Download Link:
http://www.7-zip.org/download.html
IF YOU WANT ENTIRE STOCK ROM ( TWRP BACKUP) VISIT THIS THREAD BY @Greekgodmerwyn .
https://forum.xda-developers.com/moto-g4-plus/how-to/android-7-0-moto-g4-plus-npj25-93-14-t3544601
HIT LIKE IF I HELPED YOU! :fingers-crossed: :good:
Hey I need the file bit it is in bin so give a alternative link
Can i install this to xt1644 retus?
Dont know bro I just want the 1643 one
dedik46 said:
Can i install this to xt1644 retus?
Click to expand...
Click to collapse
Not tried. Make additional backups and try. :good:
https://drive.google.com/open?id=0B25DpDahxm52MDlBRlVqNElkaUE
Not Found
Error 404
Please re-upload.
nextheart said:
https://drive.google.com/open?id=0B25DpDahxm52MDlBRlVqNElkaUE
Not Found
Error 404
Please re-upload.
Click to expand...
Click to collapse
Oh wait. Try this, @nextheart
https://www.androidfilehost.com/?fid=745425885120722570
@tywinlannister7 Thanks for quick reply.
As far as I can understand, this file should be flashed (restored) after restoring my TWRP back up of nougat stock rom taken in January-2017. Currently I am on RR-MM.
Shall I able to take OTA then?
nextheart said:
@tywinlannister7 Thanks for quick reply.
As far as I can understand, this file should be flashed (restored) after restoring my TWRP back up of nougat stock rom taken in January-2017. Currently I am on RR-MM.
Shall I able to take OTA then?
Click to expand...
Click to collapse
For OTA updates to work, you'd need a stock recovery on your device too; TWRP is a no go. Once you've restored your TWRP backup of your Nougat stock ROM (which hopefully may have the stock boot still), you can flash the stock recovery linked here https://forum.xda-developers.com/moto-g4-plus/how-to/how-to-ota-rooting-nougat-npj-25-93-14-t3601747
I imagine the easiest option is to flash the recovery in fastboot (same as you did with TWRP) using 'fastboot flash recovery recovery.img', then rebooting into recovery.
I think, though I've not tried it with a stock recovery, that you should be able to flash the recovery image in TWRP:
tap Install in the TWRP menu
Select 'install image's
Find your stock recovery image and select
Choose recovery as the image type
Flash and reboot to recovery.
Then, provided your system has a stock kernel, no modifications to your system and a stock recovery (bootloader doesn't matter), you should be able to update via OTA.
@echo92 Thanks for detailed guide.
I had flashed SuperSU on Nougat stock ROM, so stock boot might be affected. Am I right?
In short, I want to sell the device, so I want to return to stock.
nextheart said:
@echo92 Thanks for detailed guide.
I had flashed SuperSU on Nougat stock ROM, so stock boot might be affected. Am I right?
In short, I want to sell the device, so I want to return to stock.
Click to expand...
Click to collapse
You could have directly flashed the latest March 1 Security firmware via fastboot and lock your bootloader too.
tywinlannister7 said:
You could have directly flashed the latest March 1 Security firmware via fastboot and lock your bootloader too.
Click to expand...
Click to collapse
Thank you for pointing out.
Will I lose my IMEI or WIFI MAK or any thing else by fastboot method? Because I have read that some users are losing such things by fastboot method.
nextheart said:
Thank you for pointing out.
Will I lose my IMEI or WIFI MAK or any thing else by fastboot method? Because I have read that some users are losing such things by fastboot method.
Click to expand...
Click to collapse
Shouldn't create any such issues. Anyways, you can make an entire backup of the fsg and other partitions in twrp.
Yes, your data will be wiped though.
Stock Android 7.0 (Nougat) for the Moto X Pure 2015 XT1575 US NPH25.200-22
TWRP Recovery Image (Includes /boot and /system only)
**Factory reset after restore is advised.**
https://drive.google.com/drive/folders/0B2lKWOIH0bTqc29NbVNWWWhsYVE?usp=sharing
**Not tested coming straight from stock 6.0 MPH24.49-18-16.**
I did an incremental OTA upgrade from stock 6.0 MPH24.49-18-8.
Use at your own risk. If you have TWRP installed your warranty is void anyway. I'm not responsible for bricking your device.
worked great for me 18-16 thanks really appropriate the work
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
the-light said:
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
Click to expand...
Click to collapse
Yes. Root is nonconsequential. You really just need twrp.
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
newHere:) said:
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
Click to expand...
Click to collapse
No Nougat modem is available until the flashable (non OTA) full stock 7.0 rom is made available from Motorola. This is not likely to happen. No issues have been mentioned running this update on a 6.0 modem. Not sure what the advantages are honestly. I never had problems with bt, wifi, or calls with the 6.0 modem firmware.
Create a backup beforehand and you can always go back to it.
hi i noob, i speak spanish.
I have moto x pure clark xt1575, android 6 no root, i install twrp an unlock bootloader.
I try to install this "ota" room, but fail. i restore back up and now the phone follow work
mphs24.49-18-16.
Need help how instal android 7 official, or only way custom room "lineage 14"
Thanks.
Can I flash this over Lineage OS 14.1 after a full wipe?
acoupleofdroids said:
worked great for me 18-16 thanks really appropriate the work
Click to expand...
Click to collapse
Hi talk about u experience
Greetings, it counts as you did, I have android 6.0 mphs24.49-18-16 and I can not update. Phone with bootloader unlocked and with twrp, no root
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
bussemac said:
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
Click to expand...
Click to collapse
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Will this work with XT1572? Just confirming.
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
stevejohnson42 said:
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Click to expand...
Click to collapse
kelru2000 said:
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
Click to expand...
Click to collapse
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
bussemac said:
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
Click to expand...
Click to collapse
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
ptn107 said:
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
Click to expand...
Click to collapse
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
bussemac said:
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
Click to expand...
Click to collapse
Thankfully the 7.0 stock firmware is available now. I wiped and clean flashed it and it works perfectly.
https://forum.xda-developers.com/moto-x-style/general/xt1575-moto-x-pure-edition-factory-t3704142
the link is dead
someone can help, sharing a new link? thank you
TEAM WIN RECOVERY PROJECT (TWRP) version 3.2.1-0
What is TWRP?
Is a fully touch-based custom recovery, which allow you to flash some zip files, backup some partitions and restore the device.
This recovery is specific to Galaxy S6 Edge, model 404SC(SM-G925Z/Japan model, carrier Softbank). But i tested and worked on the Galaxy S6 Edge SCV31/carrier Au KDDI too. I didn't tested in any "Docomo" variant. In case you want to try, send me an message and i will provide the modified "stock kernel", to be able to boot on system.
I recommend to not try to flash this in any internacional model.
Compiled with the latest omni sources 8.1.
https://github.com/omnirom/android_bootable_recovery/
Warning:- I will take no responsability for anything bad, that can happen after flash this recovery!
Flashing this recovery, will trip the KNOX and void the Warranty. If you are ok with that, proceed downloading the recovery, flash with the Odin and enjoy.
In case you want to keep the warranty, this is not for you!
Starting from Lollipop, flashing any custom binary, will end up in stuck at boot. This is due to dm_verity. To be able to boot on system, after flash the TWRP recovery, is necessary to flash an modified kernel.
You can flash my custom permissive kernel for 404SC, from this link:- https://www.androidfilehost.com/?fid=818070582850510939
Kernel source code:- https://github.com/frankbrazillian/android_kernel_samsung_404SC
This kernel is very close as stock, only making this kernel permissive... Compiled with Linaro toolchain gcc 7.
Or if you want to keep the "stock kernel", you can find the link to the model 404SC and SCV31 stock kernel, on the second post.
You will find the link to "stock recovery" too, in case you want to revert.
How to flash the Recovery?
I recommend to flash with Odin3 v3.12~
Link to download Odin:-
https://drive.google.com/file/d/1etF4YP6nJYq-CQEzZJqDv7YS39rQSsbT/view?usp=drivesdk
Note:- After flash the TWRP recovery with Odin, is necessary to put the device in recovery mode(pressing the combo POWER + HOME + VOLUME UP), and swipe to allow modifications when prompted, to make this recovery permanent. If you won't swipe to allow modifications or leave the device restart to system before enter on recovery mode on first boot, the TWRP recovery will be replaced automatically for the "Stock recovery", and you will need to flash the TWRP recovery again.
In case you still have doubts, post an message and i will try to help you.
How to root your device?
Download the latest SuperSu from this link:- (https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip), or the latest Magisk from this thread :- (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445) and flash with the TWRP recovery. Since both root tools are systemless, if you wipe the data/factory reset, you will lost the root access. After flash the SuperSU with TWRP recovery, you will see an red message on top of the screen on boot, saying the Kernel is not SEANDROID ENFORCING. Don't worry, this is normal, since the SuperSU will edit the Kernel to be able to get root access.
Feel free to test and let me know if this recovery worked for you...
And please press the "Thanks" button, if this helped you in anyway...
Regards....
Frank.
Contributors:- @Frankbrazillian
Credits:- @Dees_Troy for the Tutorial how to and for share the Source code.
@jcadduono for the Zerolte device tree.
@adipurn for test on SCV31 (Kddi) and confirm is working.
@crzyone01 for test on SC04G (Docomo), and confirm is working.
Version :- 3.2.1-0
Device tree :-
https://github.com/frankbrazillian/android_device_samsung_404SC
Kernel :-
https://github.com/frankbrazillian/android_kernel_samsung_404SC
Omnirom source:-
https://github.com/omnirom/android_bootable_recovery/
Link to download the TWRP recovery:-
https://www.androidfilehost.com/?fid=818070582850510940
md5:- 0d2ab48a6c84d7e8ff2e85d51adee1c9
...............................................................................................................................
UPDATED TO TWRP version 3.2.2-0.
Fixed the Mtp not able to mount when on TWRP.
https://androidfilehost.com/?fid=11050483647474833296
.......................................................................................................................................
UPDATE 2018/07/08
I have add an guide to fix some problems after flash any custom binary or root the device on Nougat.
Check this post to see how to fix...
https://forum.xda-developers.com/showpost.php?p=76994790&postcount=30
......................................................................................................................................
Obs:- In the screenshots, the header color is mustard, but on the device is the real color "blue".
Since this doesn't interfere in anything, i just leave in this way....
Some screenshot's about the Kernel permissive and root.
In case you want to revert back to stock or want to keep the Stock kernel.
After flash the Twrp recovery, is necessary to flash this Stock kernel or the Custom permissive one. Both are already modified to be able to boot on system. If you flash only the Twrp recovery on Stock rom, you will be stuck at boot. This is due to dm-verity.
Link to download the Stock kernel for 404SC
https://drive.google.com/file/d/1ZAcX_Hm4Ln7-ZtEte-TIE4_xEvSQHVXS/view?usp=drivesdk
Link to download the Stock recovery for 404SC
https://drive.google.com/file/d/1_b6Dk95bxIvhjEyM9xuGB1RJER7eHWpJ/view?usp=drivesdk
......................................................................................................................................
Obs:- For the SCV31 model, i didn't compiled yet the Custom permissive kernel, so is necessary to flash this Stock kernel, after flash the Twrp recovery or the device won't boot, due to dm-verity. This stock kernel is modified to be able to boot on system.
Link for download the Stock kernel for SCV31
https://drive.google.com/file/d/1Od4mY9mdC2hQMEM9txDicXfaiPYuqjdH/view?usp=drivesdk
Link for download the Stock recovery for SCV31
https://drive.google.com/file/d/13BlClQdF3lARk2SfJ9hd6ux5Z1VTYENn/view?usp=drivesdk
A Firmware switch Stock & Costum that was Magic. XD
YouLose66 said:
A Firmware switch Stock & Costum that was Magic. XD
Click to expand...
Click to collapse
Yes... I will release an stock and custom edition... You can create an backup with TWRP and switch between both.
YouLose66 said:
A Firmware switch Stock & Costum that was Magic. XD
Click to expand...
Click to collapse
Basically exploiting the buffer between reboots while in DL mode. Smart. Hopefully when they fix it they simply throw an autoreboot after file complete, rather than some obnoxious knoxx hoops to jump through. I'm going to test this on my s6 right now. Actually I bet they end up making a softknoxx that gets flagged after any download, and throws a verify function.
So... Anyone who flashed this recovery on 404SC or SCV31 on Nougat, can give me some feedback?
Any issue? Worked for you?
@adipurn ..... Custom permissive kernel for SCV31 NN, with the deepsleep fixed, already done.
I will send you to test, ok?
Compiled with Gcc linaro 7.
Still need some fixes....
---------- Post added at 06:31 PM ---------- Previous post was at 06:03 PM ----------
[/COLOR]
Frankbrazillian said:
@adipurn ..... Custom permissive kernel for SCV31 NN, with the deepsleep fixed, already done.
I will send you to test, ok?
Compiled with Gcc linaro 7.
Still need some fixes....
Click to expand...
Click to collapse
And now i have no delay incoming messages such as WA etc. and it looks like this fixed it for me.
Phone goes into deep sleep normal and now the battery drain is back to normal.
Thank a lot for your work [emoji4]
Sent from my [device_name] using XDA-Developers Legacy app
adipurn said:
---------- Post added at 06:31 PM ---------- Previous post was at 06:03 PM ----------
[/COLOR]And now i have no delay incoming messages such as WA etc. and it looks like this fixed it for me.
Phone goes into deep sleep normal and now the battery drain is back to normal.
Thank a lot for your work [emoji4]
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
My pleasure!
I will be fixing the other issues and send to you test again. Thank's for helping me with the tests!
it works on my scv31, but there are some issues.
1. settings might not display the latest changes
2. can not reboot after flash a custom rom.
3. MTP is not work
450026937 said:
it works on my scv31, but there are some issues.
1. settings might not display the latest changes
2. can not reboot after flash a custom rom.
3. MTP is not work
Click to expand...
Click to collapse
Hi....
What do you mean, settings might not display the latest changes?
About the reboot problem, this can be a problem with the rom itself and not the TWRP. Can you give me the link of the rom you flashed? I need to reproduce the problem.
About the MTP, i'll try to fix it....
Maybe i will build an recovery specific for this model, just in case.
Thank's for your feedback anyway....
Regards....
Frankbrazillian said:
Hi....
What do you mean, settings might not display the latest changes?
About the reboot problem, this can be a problem with the rom itself and not the TWRP. Can you give me the link of the rom you flashed? I need to reproduce the problem.
About the MTP, i'll try to fix it....
Maybe i will build an recovery specific for this model, just in case.
Thank's for your feedback anyway....
Regards....
Click to expand...
Click to collapse
1. setting problem
i changed some settings and had some other operation, when i back to setting screen, i found all(some) setting are reset.
i can't remember the details, maybe just ignore this feedback.
2.reboot problem
i queued rom and kernel task, after all completed, the reboot is frozen in progress.
here is the rom i flashed.
https://forum.xda-developers.com/ga...om-aurora-g920-5-f-s-k-l-t-s8-port-3-t3640762
450026937 said:
1. setting problem
i changed some settings and had some other operation, when i back to setting screen, i found all(some) setting are reset.
i can't remember the details, maybe just ignore this feedback.
2.reboot problem
i queued rom and kernel task, after all completed, the reboot is frozen in progress.
here is the rom i flashed.
https://forum.xda-developers.com/ga...om-aurora-g920-5-f-s-k-l-t-s8-port-3-t3640762
Click to expand...
Click to collapse
I was talking with adipurn who are helping me with tests of the custom kernel and he said, they can flash custom rom with TWRP without any bootloop, but the TWRP are not working with aroma. I need to figured it out, what is necessary to get aroma working on TWRP.
The link of the rom you post, i believe is not for your model... It's for internacional model or some chinese variant. Thats why you got problems...
Untill i fix the compatibility with aroma, try to flash some custom firmware specific for your model SCV31.
As soon as i can fix the mentioned issues, i'll update the thread with the links for download.
Thank's again for your feedback.
Regards......
Frank.
Frankbrazillian said:
I was talking with adipurn who are helping me with tests of the custom kernel and he said, they can flash custom rom with TWRP without any bootloop, but the TWRP are not working with aroma. I need to figured it out, what is necessary to get aroma working on TWRP.
The link of the rom you post, i believe is not for your model... It's for internacional model or some chinese variant. Thats why you got problems...
Untill i fix the compatibility with aroma, try to flash some custom firmware specific for your model SCV31.
As soon as i can fix the mentioned issues, i'll update the thread with the links for download.
Thank's again for your feedback.
Regards......
Frank.
Click to expand...
Click to collapse
Actually the aurora rom work for most model if you flash the right kernel, and i am using it now. ( i reboot device by force )
I can't post outside links, cause i'm new here.
The rom and kernel is downloaded from other post by aurora team( not in xda ),and scv31 is in the support list.
450026937 said:
Actually the aurora rom work for most model if you flash the right kernel, and i am using it now. ( i reboot device by force )
I can't post outside links, cause i'm new here.
The rom and kernel is downloaded from other post by aurora team( not in xda ),and scv31 is in the support list.
Click to expand...
Click to collapse
Don't worry... I think i already know how to get the Aroma installer working with the TWRP recovery.
I will fix the mtp too.
Regards....
I'm going to give this a shot on an old Docomo SC-04G I have lying around. Any tips or suggestions for the process? I see you mentioned about the source code but I'm not sure what I would need to change before re-compiling it. I do not have any experience with making a kernel passive.
crzyone01 said:
I'm going to give this a shot on an old Docomo SC-04G I have lying around. Any tips or suggestions for the process? I see you mentioned about the source code but I'm not sure what I would need to change before re-compiling it. I do not have any experience with making a kernel passive.
Click to expand...
Click to collapse
Hi crzyone... Are you on Nougat already? Did you know how to extract the boot.img and recovery.img from stock rom? If you are, please send me this 2 images to i edit to you be able to boot, after flash the TWRP....
Regards....
Yes, that device is on 7.0 already. 7.0/SC04G0MU1CQF1. No, I don't know how to extract the stock boot.img or recovery.img. Trying to find some instructions on the forums right now.
crzyone01 said:
Yes, that device is on 7.0 already. 7.0/SC04G0MU1CQF1. No, I don't know how to extract the stock boot.img or recovery.img. Trying to find some instructions on the forums right now.
Click to expand...
Click to collapse
That's ok! I will download the rom and extract the images.
After, i'll send to you ok?
Regards....
crzyone01 said:
Yes, that device is on 7.0 already. 7.0/SC04G0MU1CQF1. No, I don't know how to extract the stock boot.img or recovery.img. Trying to find some instructions on the forums right now.
Click to expand...
Click to collapse
Ok... Here is the link to download the stock kernel and stock recovery in case the Twrp won't work on your model... This is specific for the SC-04G model on Nougat.
Kernel:-
https://drive.google.com/file/d/1gEh32YnXxJk5qWgT4WPVtX3vjRGMxivQ/view?usp=drivesdk
Recovery:-
https://drive.google.com/file/d/1X0hRIUgZBKk4PuRLtPrETqFRG3cyFNaq/view?usp=drivesdk
First flash the TWRP recovery with Odin and after flashed, the phone will boot. Don't let the device restart to System.... Put the phone in recovery mode, (Power button + home + volume up). Swipe to allow changes to system. After put the phone in download mode and flash the "modified" stock kernel to be able to boot.
Reboot the device and you are ready to go...
Let me know if worked for you....
I will be uploading an new Twrp version, as soon as i fix the issues..
Press the thanks button if helped and enjoy....
Guys warning dont install official twrp on existing unofficial one it softbbricks the device i flashed fastboot rom and updated to 5.1.6 and followed the tutorial on official twrp to get it working
I just flashed the zip. I'm sure things go south of you flash the original .IMG by itself. I think you also have to reroot after flashing or you boot loop.
Ascertion said:
I just flashed the zip. I'm sure things go south of you flash the original .IMG by itself. I think you also have to reroot after flashing or you boot loop.
Click to expand...
Click to collapse
You were on unofficial TWRP and just flashed the zip and it worked?
ddominikt said:
You were on unofficial TWRP and just flashed the zip and it worked?
Click to expand...
Click to collapse
No, I did that and didn't worked. Just flash img. from twrp on fastboot and then flash permanent twrp from that temporary twrp
Manivannan9444 said:
Guys warning dont install official twrp on existing unofficial one it softbbricks the device i flashed fastboot rom and updated to 5.1.6 and followed the tutorial on official twrp to get it working
Click to expand...
Click to collapse
I literally just did. And it's totally fine. Just flashed the zip then rebooted recovery then reflashed magisk v16.0 zip then rebooted system. Zero issues whatsoever.
Where do you get oos 5.1.6?
BTW, you can flash official OTA in TWRP then just flash TWRP & magisk again afterwards.
Sent from my OnePlus 6 using XDA Labs
brossovitch said:
I literally just did. And it's totally fine. Just flashed the zip then rebooted recovery then reflashed magisk v16.0 zip then rebooted system. Zero issues whatsoever.
Where do you get oos 5.1.6?
BTW, you can flash official OTA in TWRP then just flash TWRP & magisk again afterwards.
Click to expand...
Click to collapse
You just flashed the installer zip what about twrp img
Key is flashing magisk. It's in every tutorial
Manivannan9444 said:
You just flashed the installer zip what about twrp img
Click to expand...
Click to collapse
No. I already had unofficial TWRP installed so I simply flashed the installer.
Here's exactly what I did:
1. Downloaded the official TWRP installer package
2. Hold power button, selected reboot, select recovery, tap to reboot.
3. In TWRP, confirm Lockscreen code. Select install & selected installer package swipe to flash.
4. Press home button, select reboot, select recovery, reboot.
5. In TWRP again (now official version) confirm Lockscreen code again, select install, select Magisk 16.0, swipe to flash.
6. Select reboot system. System reboots.
7. Go on XDA find this thread and say it worked fine.
8. This is where we are now. LOL
FYI... I used the unofficial TWRP provided by Zedomax (Max Lee from HighOnAndroid) originally. I didn't do all those other crazy versions.
Sent from my OnePlus 6 using XDA Labs
brossovitch said:
No. I already had unofficial TWRP installed so I simply flashed the installer.
Here's exactly what I did:
1. Downloaded the official TWRP installer package
2. Hold power button, selected reboot, select recovery, tap to reboot.
3. In TWRP, confirm Lockscreen code. Select install & selected installer package swipe to flash.
4. Press home button, select reboot, select recovery, reboot.
5. In TWRP again (now official version) confirm Lockscreen code again, select install, select Magisk 16.0, swipe to flash.
6. Select reboot system. System reboots.
7. Go on XDA find this thread and say it worked fine.
8. This is where we are now. LOL
FYI... I used the unofficial TWRP provided by Zedomax (Max Lee from HighOnAndroid) originally. I didn't do all those other crazy versions.
Click to expand...
Click to collapse
Ok
intruda119 said:
Key is flashing magisk. It's in every tutorial
Click to expand...
Click to collapse
Spot on. Most people make this mistake then moan about it not working.
Sent from my ONEPLUS A6003 using Tapatalk
I flashed official twrp on stock recovery and now I can't exit twrp in both slots
Confirmed working fine on official twrp
Reboot recovery
Flash twrp installer zip (official)
Reboot recovery
Flash magisk 16.0
Wipe cache/davlik
Reboot system
*** DO NOT INSTALL TWRP when printed just reboot system
Profit
Rooted running official TWRP 3.2.1 enchilada ??
Alright, this is a bit confusing.
Can someone tell me if I can update to official TWRP from unofficial, without losing my data/settings? The method OP describes (via fastboot) resets all my data I guess? Wish I had never installed the unofficial version....
I have this unofficial version...
I had the unofficial twrp from the very same link you posted. No problem in updating to official TWRP. Just boot into recovery, install, select the official TWRP installer (forget the img file). Reboot in recovery again, install Magisk. Reboot to system. I did not lose any data or settings (keep always a backup of your important files, you'll never know).
Thanks for the quick reply! I dared to try it and I can confirm unofficial TWRP can indeed succesfull be overflashed with the official one. No bootloops, no errors!
Phew... I had a full nandroid backup, but I do not like the hassle of going through unbricking and such....
I had uninstalle Magisk beforehand, could be the trick?
I do not know why OP was not succesful, but it seems not a problem for everyone.
This thread really should be closed because the OP is 100% not true. If you get a softbrick, it's because you didn't install the official twrp correctly. The instructions are bit involved and I see many people skipping steps because they didn't read or don't see why they need to do anything different from previous phones.
Question I updated from an unofficial version. i followed instruction someone posted on here. But since the unofficial and official look exactly same how do I know I have official?
It does work, u just didn't do it right, u can install official TWRP over unofficial.
Well, depends on which unofficial one you use(d) .
The unofficial one I used was quite laggy on first start, I had to flash some additional zips to get it working right (see the link for install process). So concerning that one: when it works fine from start, you have the new one.
Blackout said:
Question I updated from an unofficial version. i followed instruction someone posted on here. But since the unofficial and official look exactly same how do I know I have official?
Click to expand...
Click to collapse
GSI IS DONE CHECK THE LINK BELOW, IT'S CURRENTLY IN PROGRESS BELOW IS THE STATUS ME WORKING ON IT
THE GSI PIE TUTORIAL
Grab these two files (Big Thanks to @Zerovoid from 4PDA, @Seryioo, and @mac12m99)
Fixed SDCard Support TWRP Image File (Download this and put this on your SDCard and Computer)-
Original Fixed TWRP XDA Post
Fixed SDCard Support TWRP Installer Zip (Download and put this on your SDCard)-
Fixed TWRP .zip Installer
But I got TWRP on 10.0.4.0 with magisk, and Justice Kernel.
THIS WILL WIPE YOUR DEVICE I'M DEFINITELY NOT RESPONSIBLE FOR LOST DATA, SD CARDS, ETC
Start with the phone being on with USB Debugging enabled correctly and bootloader unlocked
Type: adb reboot bootloader
So flash the 10.0.4.0 ROM through MiFlash using the flash_all.bat, this process has to be done so backup your data before erasing.
After it is done flashing it restarts, go ahead and hold power and volume down right back to the Bootloader
Type: fastboot boot twrp-3.2.3-0-daisy_zero.img
It would boot into TWRP, if you see something about decryption hit cancel this may mean you haven't followed directions so far
Tap install and find your SD Card, find the fixed-twrp-installer-daisy.zip where ever you put it on your SD Card and install it, this process takes a few minutes when finished DO NOT HIT REBOOT SYSTEM!
Hit the home button back to TWRP home screen and tap reboot >>> bootloader
Download this to your computer -
aboot.img
Type: fastboot flash aboot aboot_9.6.4.img
Then type: fastboot reboot
Afterwards your phone shall boot up to Android if it does hold power and volume up and release power and keep hold volume up when the screen turns back on to go-to recovery, if TWRP boots up you have successfully completed the task.
Now flash Magisk zip (optional)
Hopefully this helped kind of my first tutorial, this was my process.
Reserved
Looks like I'll be updating and trying when I get home wish me luck..
rob420p said:
Looks like I'll be updating and trying when I get home wish me luck..
Click to expand...
Click to collapse
I'll have the GSI Tutorial up as soon as possible. Let me know if you run into any problems!
I am curious does the backup n restore work with this?
rob420p said:
I am curious does the backup n restore work with this?
Click to expand...
Click to collapse
Everything in TWRP works sir, it was already functional the only component missing in the original is the SD Card Support which is fixed in the TWRP above!
But why this tutorial when wifi isn't working than. I think everyone needs wifi.
Sent from my Phh-Treble vanilla using Tapatalk
cd492 said:
But why this tutorial when wifi isn't working than. I think everyone needs wifi.
Click to expand...
Click to collapse
From what I have read this is happening to allot of devices running pie not just our device
cd492 said:
But why this tutorial when wifi isn't working than. I think everyone needs wifi.
Sent from my Phh-Treble vanilla using Tapatalk
Click to expand...
Click to collapse
That's weird, I'm running Android Pie on A2L and Wi-Fi looks great.
Have you tried performing a full wipe and flashing the stock ROM?
I had other issues which were fixed by flashing the stock ROM with a full wipe.
Tbh I don't think the patch updates are 100% trustworthy, so I simply update it manually.
cd492 said:
But why this tutorial when wifi isn't working than. I think everyone needs wifi.
Sent from my Phh-Treble vanilla using Tapatalk
Click to expand...
Click to collapse
lbsilva said:
That's weird, I'm running Android Pie on A2L and Wi-Fi looks great.
Have you tried performing a full wipe and flashing the stock ROM?
I had other issues which were fixed by flashing the stock ROM with a full wipe.
Tbh I don't think the patch updates are 100% trustworthy, so I simply update it manually.
Click to expand...
Click to collapse
This does not relate to this tutorial, there is nothing wrong with WiFi from this tutorial
I was talking about the GSI Tutorial I am making in the cyan text above nothing it wrong with this tutorial, if there was why would I post it
rob420p said:
Looks like I'll be updating and trying when I get home wish me luck..
Click to expand...
Click to collapse
Have you tested it?
InfinityXDA said:
Have you tested it?
Click to expand...
Click to collapse
Not yet I'm useing a new laptop and had trouble sitting up my cdrive I'll try again tonight
rob420p said:
Not yet I'm useing a new laptop and had trouble sitting up my cdrive I'll try again tonight
Click to expand...
Click to collapse
If you need assistance just let me know!
InfinityXDA said:
If you need assistance just let me know!
Click to expand...
Click to collapse
I main issue I was having was with mi flash for some reason when I check the Oreo Ron I can't find it in the files downloaded 5 times
rob420p said:
I main issue I was having was with mi flash for some reason when I check the Oreo Ron I can't find it in the files downloaded 5 times
Click to expand...
Click to collapse
You have to extract the file using WinZip, it's just like a .zip file. But after you extract the stock rom there should be another file in that extract that too and select the folder extracted folder with all of the .img in it in MiFlash.
You must have the Pie ROM to do this
Please make sure you have the latest ROM or latest patch from this link https://en.miui.com/getrom-354.html?
InfinityXDA said:
You have to extract the file using WinZip, it's just like a .zip file. But after you extract the stock rom there should be another file in that extract that too and select the folder extracted folder with all of the .img in it in MiFlash.
You must have the Pie ROM to do this
Please make sure you have the latest ROM or latest patch from this link https://en.miui.com/getrom-354.html?
Click to expand...
Click to collapse
Thanks this is a little different I'm used to Nexus or motorola devuces
rob420p said:
Thanks this is a little different I'm used to Nexus or motorola devuces
Click to expand...
Click to collapse
No problem I'm here to help!
Thanks for the nice Tutorial, the installation works fine.
Backup to the sd-card is now possible, but the restore doesn' work. It stops with this message:
Cannot restore System -- mounted read only
Linhx said:
Thanks for the nice Tutorial, the installation works fine.
Backup to the sd-card is now possible, but the restore doesn' work. It stops with this message:
Cannot restore System -- mounted read only
Click to expand...
Click to collapse
So it's not mounting right sounds like it can right but can't read
I found the solution here:
https://forum.hovatek.com/thread-15952.html
- Go to the TWRP Home Screen and select Mount
- Untick "Mount system partition read-only"
Restore was starting then, but after 99% this error appeared:
The extractTarFork() process ended with ERROR: 255
The device didn't start anymore and I had to set it up again.