DISCLAIMER: I AM NOT LIABLE TO ANY DAMAGE THAT HAPPENS TO YOUR DEVICE BECAUSE OF DOING ANYTHING WRONG.
MOTO G4 PLUS [XT1643]
This is for those who had flashed a custom kernel on their stock ROM and now want to revert to stock.
REQUIREMENTS:
1. TWRP 3.0.3-n2 by @Shreps .
https://forum.xda-developers.com/mo...covery-twrp-3-0-2-r3-moto-g4-g4-plus-t3494337
This one is more updated/maintained than the official 3.0.2 version.
2. 7Zip Compression Utility:
Download and install on your PC. I use this as it gives the maximum ultra level compression. See Downloads below.
PROCEDURE:
1. Download and extract the TWRP.7z using 7Zip.
2. Place the TWRP folder it in the root directory of your INTERNAL STORAGE.
2. Just reboot TWRP once and choose Restore and then choose this: athene_93-14_boot
3. Swipe to restore.
NOTE: As a general recommendation for all zip installations and backup/restore using twrp, Wipe Cache and ART Cache before you Reboot to System.
4. You're DONE
DOWNLOADS:
Google Drive Link for the file:
https://drive.google.com/open?id=0B25DpDahxm52MDlBRlVqNElkaUE
7-ZIP Download Link:
http://www.7-zip.org/download.html
IF YOU WANT ENTIRE STOCK ROM ( TWRP BACKUP) VISIT THIS THREAD BY @Greekgodmerwyn .
https://forum.xda-developers.com/moto-g4-plus/how-to/android-7-0-moto-g4-plus-npj25-93-14-t3544601
HIT LIKE IF I HELPED YOU! :fingers-crossed: :good:
Hey I need the file bit it is in bin so give a alternative link
Can i install this to xt1644 retus?
Dont know bro I just want the 1643 one
dedik46 said:
Can i install this to xt1644 retus?
Click to expand...
Click to collapse
Not tried. Make additional backups and try. :good:
https://drive.google.com/open?id=0B25DpDahxm52MDlBRlVqNElkaUE
Not Found
Error 404
Please re-upload.
nextheart said:
https://drive.google.com/open?id=0B25DpDahxm52MDlBRlVqNElkaUE
Not Found
Error 404
Please re-upload.
Click to expand...
Click to collapse
Oh wait. Try this, @nextheart
https://www.androidfilehost.com/?fid=745425885120722570
@tywinlannister7 Thanks for quick reply.
As far as I can understand, this file should be flashed (restored) after restoring my TWRP back up of nougat stock rom taken in January-2017. Currently I am on RR-MM.
Shall I able to take OTA then?
nextheart said:
@tywinlannister7 Thanks for quick reply.
As far as I can understand, this file should be flashed (restored) after restoring my TWRP back up of nougat stock rom taken in January-2017. Currently I am on RR-MM.
Shall I able to take OTA then?
Click to expand...
Click to collapse
For OTA updates to work, you'd need a stock recovery on your device too; TWRP is a no go. Once you've restored your TWRP backup of your Nougat stock ROM (which hopefully may have the stock boot still), you can flash the stock recovery linked here https://forum.xda-developers.com/moto-g4-plus/how-to/how-to-ota-rooting-nougat-npj-25-93-14-t3601747
I imagine the easiest option is to flash the recovery in fastboot (same as you did with TWRP) using 'fastboot flash recovery recovery.img', then rebooting into recovery.
I think, though I've not tried it with a stock recovery, that you should be able to flash the recovery image in TWRP:
tap Install in the TWRP menu
Select 'install image's
Find your stock recovery image and select
Choose recovery as the image type
Flash and reboot to recovery.
Then, provided your system has a stock kernel, no modifications to your system and a stock recovery (bootloader doesn't matter), you should be able to update via OTA.
@echo92 Thanks for detailed guide.
I had flashed SuperSU on Nougat stock ROM, so stock boot might be affected. Am I right?
In short, I want to sell the device, so I want to return to stock.
nextheart said:
@echo92 Thanks for detailed guide.
I had flashed SuperSU on Nougat stock ROM, so stock boot might be affected. Am I right?
In short, I want to sell the device, so I want to return to stock.
Click to expand...
Click to collapse
You could have directly flashed the latest March 1 Security firmware via fastboot and lock your bootloader too.
tywinlannister7 said:
You could have directly flashed the latest March 1 Security firmware via fastboot and lock your bootloader too.
Click to expand...
Click to collapse
Thank you for pointing out.
Will I lose my IMEI or WIFI MAK or any thing else by fastboot method? Because I have read that some users are losing such things by fastboot method.
nextheart said:
Thank you for pointing out.
Will I lose my IMEI or WIFI MAK or any thing else by fastboot method? Because I have read that some users are losing such things by fastboot method.
Click to expand...
Click to collapse
Shouldn't create any such issues. Anyways, you can make an entire backup of the fsg and other partitions in twrp.
Yes, your data will be wiped though.
Related
Hi everyone. I saw that Google released the factory image for the Nexus 5. I read on a lot of posts that the XDA members usually release a zip file that you just flash on your Nexus 5 through the recovery and it will install the bootanimation and the rom for you. I have no idea where that is. I want the final version of Lollipop and I want to flash it, not wait for the OTA update. Is there already a zip file like this or do I have to wait for some more time? Thank you.
Thread below you lol
Most of the flashing is described by google themselves: https://developers.google.com/android/nexus/images
But do read more about it elsewhere and don't forget to backup everything before you flash, if your bootloader is locked then unlocking it in order to flash the image will wipe your phone.
Sent from my Nexus 5 using XDA Premium 4 mobile app
There's an OTA Zip over there on AndroidPolice.
You can also flash the Factory Image like most of us did.
It'll be like a brand new Nexus.
maxell505 said:
Hi everyone. I saw that Google released the factory image for the Nexus 5. I read on a lot of posts that the XDA members usually release a zip file that you just flash on your Nexus 5 through the recovery and it will install the bootanimation and the rom for you. I have no idea where that is. I want the final version of Lollipop and I want to flash it, not wait for the OTA update. Is there already a zip file like this or do I have to wait for some more time? Thank you.
Click to expand...
Click to collapse
you can go look in the android development section of the nexus 5, there you will find recovery flashable stock and aosp roms. here a flash in recovery stock lollipop rom http://forum.xda-developers.com/goo...-android-4-4-3-ktu84m-rooted-busybox-t2557523
Curiousn00b said:
There's an OTA Zip over there on AndroidPolice.
You can also flash the Factory Image like most of us did.
It'll be like a brand new Nexus.
Click to expand...
Click to collapse
simms22 said:
you can go look in the android development section of the nexus 5, there you will find recovery flashable stock and aosp roms. here a flash in recovery stock lollipop rom http://forum.xda-developers.com/goo...-android-4-4-3-ktu84m-rooted-busybox-t2557523
Click to expand...
Click to collapse
Ok so I have CWM recovery and I have the stock 4.4.4 rom with xposed framework installed. So can I just put the factory image on my nexus 5 and than go on CWM recovery and flash it?
maxell505 said:
Ok so I have CWM recovery and I have the stock 4.4.4 rom with xposed framework installed. So can I just put the factory image on my nexus 5 and than go on CWM recovery and flash it?
Click to expand...
Click to collapse
What I did:
Backed up my files.
Used WUGFrsh to restore the factory image.
Curiousn00b said:
What I did:
Backed up my files.
Used WUGFrsh to restore the factory image.
Click to expand...
Click to collapse
Ok but WUGFrsh is a rooting toolkit and it is only for people who need to root their device. I am looking to just flash the system image onto my device.
maxell505 said:
Ok but WUGFrsh is a rooting toolkit and it is only for people who need to root their device. I am looking to just flash the system image onto my device.
Click to expand...
Click to collapse
So just use fastboot....?
#stayparanoid
maxell505 said:
Ok but WUGFrsh is a rooting toolkit and it is only for people who need to root their device. I am looking to just flash the system image onto my device.
Click to expand...
Click to collapse
Have you seen any of the other options?
Wugfresh Nexus Root Toolkit, contains options to restore completely to stock, flashing recoveries, boot images, you name it.
It's like an organized version for people who don't do fastboot command typings through CMD.
You could always flash the factory image yourself by Google Instructions, or download the OTA file on Android Police. The choice is yours. :/
Curiousn00b said:
What I did:
Backed up my files.
Used WUGFrsh to restore the factory image.
Click to expand...
Click to collapse
Curiousn00b said:
Have you seen any of the other options?
Wugfresh Nexus Root Toolkit, contains options to restore completely to stock, flashing recoveries, boot images, you name it.
It's like an organized version for people who don't do fastboot command typings through CMD.
You could always flash the factory image yourself by Google Instructions, or download the OTA file on Android Police. The choice is yours. :/
Click to expand...
Click to collapse
Ok so using WugFrsh, I have to restore back to complete stock and get the stock recovery also and than I have to flash the system image?
maxell505 said:
Ok so using WugFrsh, I have to restore back to complete stock and get the stock recovery also and than I have to flash the system image?
Click to expand...
Click to collapse
Not exactly.
Download the factory image, and if you want to use Wugfresh, you go to restore to stock, select your own downloaded factory image, insert the MD5 from the Google Page, and it'll guide you through the rest. It's safer to wipe before doing this, but either way, it does it by itself.
Curiousn00b said:
Not exactly.
Download the factory image, and if you want to use Wugfresh, you go to restore to stock, select your own downloaded factory image, insert the MD5 from the Google Page, and it'll guide you through the rest. It's safer to wipe before doing this, but either way, it does it by itself.
Click to expand...
Click to collapse
Ok so I am going to make this clear so I can understand better and not mess up( because I tend to do that A LOT)
*Before I do anything I have to factory reset my device.*
1. Download the factory image from here: https://developers.google.com/android/nexus/images
2. Open WugFresh and click on the "Flash Stock + Unroot" option.
3. I do not understand the MD5 part.
4. WugFresh will guide me through the rest.
P.S: I do want to be rooted when on Lollipop so I can just root again after I install Lollipop right?
maxell505 said:
Ok so I am going to make this clear so I can understand better and not mess up( because I tend to do that A LOT)
*Before I do anything I have to factory reset my device.*
1. Download the factory image from here: https://developers.google.com/android/nexus/images
2. Open WugFresh and click on the "Flash Stock + Unroot" option.
3. I do not understand the MD5 part.
4. WugFresh will guide me through the rest.
P.S: I do want to be rooted when on Lollipop so I can just root again after I install Lollipop right?
Click to expand...
Click to collapse
The MD5 part, next to the " Download " button on the Google page. You see MD5:yadayadayada. In Wugfresh, it'll need the MD5 to confirm the zip.
You can root by installing a custom recovery, flashing SuperSU and a modified kernel.
Curiousn00b said:
Not exactly.
Download the factory image, and if you want to use Wugfresh, you go to restore to stock, select your own downloaded factory image, insert the MD5 from the Google Page, and it'll guide you through the rest. It's safer to wipe before doing this, but either way, it does it by itself.
Click to expand...
Click to collapse
Curiousn00b said:
The MD5 part, next to the " Download " button on the Google page. You see MD5:yadayadayada. In Wugfresh, it'll need the MD5 to confirm the zip.
You can root by installing a custom recovery, flashing SuperSU and a modified kernel.
Click to expand...
Click to collapse
Ok thank you. I just have to factory reset my phone, flash stock and unroot, and insert the MD5. Once I get Lollipop installed, than I root.
maxell505 said:
Ok thank you. I just have to factory reset my phone, flash stock and unroot, and insert the MD5. Once I get Lollipop installed, than I root.
Click to expand...
Click to collapse
It said it is recommended to use force flash mode. Should I say yes to this?
maxell505 said:
It said it is recommended to use force flash mode. Should I say yes to this?
Click to expand...
Click to collapse
I did anyway and it worked! I am setting up Lollipop as I type this. Right now it is activating my cellular service. Hopefully everything works fine!
a little background information
current build: NMF260
recovery: TWRP RC1
kernel: elemental x 1.03
rooted: yes
Mods: weta audio 9.1
So I have completely forgotten how to do a manual sideload for an OTA. Could someone give me step by step, hand holding instructions?
What I have downloaded onto PC
sailfish-ota-nof26v -4bbb310d.zip
twrp-3.0.2-0-RC1-fastboot-sailfish.img
boot.img from nof26v build (that is for recovery right?)
and i have twrp zips for supersu, elemental x, and twrp rc1
basically i forgot how to flash stock recovery, because I need to to manually update OTA right? also do I need to remove the weta audio 9.1 mod first before doing the OTA? or can i just flash over it? anyone know?
Thanks!
https://developers.google.com/android/images <---- Click Full OTA update and follow instructions. Will not wipe anything. You do need to be on official.
If you want to just flash the peices download all of them and boot into bootloader then use fastboot commands per each item. Google the commands for bootloader, radio and the kind. Very easy.
cstrife999 said:
https://developers.google.com/android/images <---- Click Full OTA update and follow instructions. Will not wipe anything. You do need to be on official.
If you want to just flash the peices download all of them and boot into bootloader then use fastboot commands per each item. Google the commands for bootloader, radio and the kind. Very easy.
Click to expand...
Click to collapse
hey thanks but I have TWRP recovery, those instructions are if youre on stock recovery. do you know how to get back onto stock recovery?
With the OTA zip flash the recovery using command.. flash recovery (recovery name.zip)
cstrife999 said:
With the OTA zip flash the recovery using command.. flash recovery (recovery name.zip)
Click to expand...
Click to collapse
where can we get the stock recovery.img?
that is not in the ota.zip file and neither in the full factory image zip file
I'm not rooted but since no one answered as of yet then I do believe stock recovery is now in the boot.img file. Search the Pixel XL forums too.
Stock recovery is in the OTA under boot.
kazemitsui said:
hey thanks but I have TWRP recovery, those instructions are if youre on stock recovery. do you know how to get back onto stock recovery?
Click to expand...
Click to collapse
No need for stock recovery. TWRP has a sideload option. Check my guide here.
spiller37 said:
No need for stock recovery. TWRP has a sideload option. Check my guide here.
Click to expand...
Click to collapse
thanks ill remember that for future uses, i used skipsoft to reflash stock recovery and all that.
Hello guys
I unlocked the bootloader and root my phone but it's not full root because it's Read only and I can't uninstall any system apps and the only thing I get is to freeze those app and because of this I want to go back to stuck
But I couldn't do that no matter what:crying::crying:
I try Upade.app in dload folder on both internal and sd card but I get error when I want to initiate the update
So please if any one knows a cretin way to go back to stuck, do tell
does Sp Flash tool works with this phone or not ???
badboy_6120 said:
Hello guys
I unlocked the bootloader and root my phone but it's not full root because it's Read only and I can't uninstall any system apps and the only thing I get is to freeze those app and because of this I want to go back to stuck
But I couldn't do that no matter what:crying::crying:
I try Upade.app in dload folder on both internal and sd card but I get error when I want to initiate the update
So please if any one knows a cretin way to go back to stuck, do tell
does Sp Flash tool works with this phone or not ???
Click to expand...
Click to collapse
try to reroot using the method from this thread https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
you need to flash your stock boot.img thru twrp to remove the superuser you use previously before proceed using superRoot or SuperSU from that thread. and try to look for your stock boot.img maybe you can find it in this thread https://forum.xda-developers.com/mate-9/development/stock-boot-img-library-t3573312
Good Luck.
eddmecha said:
try to reroot using the method from this thread https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
you need to flash your stock boot.img thru twrp to remove the superuser you use previously before proceed using superRoot or SuperSU from that thread. and try to look for your stock boot.img maybe you can find it in this thread https://forum.xda-developers.com/mate-9/development/stock-boot-img-library-t3573312
Good Luck.
Click to expand...
Click to collapse
thanks for your reply
any Idea how to get back to stuck firmwork ???
badboy_6120 said:
thanks for your reply
any Idea how to get back to stuck firmwork ???
Click to expand...
Click to collapse
Flash back stock boot and you'll be back to stock, as long as you didn't modify any of the other partitions (/system, /vendor, /product). And flash back recovery using adb.
Get stock boot by downloading your firmware from http://hwmt.ru/oth/HWFF/info/view.php?find_model=mha
Then download Huawei Update Extractor https://forum.xda-developers.com/showthread.php?t=2433454
Open it up and open update.app which you extracted from update.zip. Right click on BOOT and extract, same with recovery.
Flash back boot using twrp and 'fastboot flash recovery recovery.img' to flash back stock boot.
ante0 said:
Flash back stock boot and you'll be back to stock, as long as you didn't modify any of the other partitions (/system, /vendor, /product). And flash back recovery using adb.
Get stock boot by downloading your firmware from http://hwmt.ru/oth/HWFF/info/view.php?find_model=mha
Then download Huawei Update Extractor https://forum.xda-developers.com/showthread.php?t=2433454
Open it up and open update.app which you extracted from update.zip. Right click on BOOT and extract, same with recovery.
Flash back boot using twrp and 'fastboot flash recovery recovery.img' to flash back stock boot.
Click to expand...
Click to collapse
I did that but I still don't see "system update" in settings and still getting error while applying new update and can not apply any theme and still have that ridiculous screen that apeared after unlocking bootloader
I mean any way like flashing a new firmware with a tool like SP Flash Tool
badboy_6120 said:
I did that but I still don't see "system update" in settings and still getting error while applying new update and can not apply any theme and still have that ridiculous screen that apeared after unlocking bootloader
I mean any way like flashing a new firmware with a tool like SP Flash Tool
Click to expand...
Click to collapse
You will have to flash back hw and public zips for your build. There's a folder (hw_init) in /data/ that gets wiped when you format data, it contain apps (system update for example) and the theme engine.
So you will have to flash back TWRP again and decrypt again if you went back to stock, else you won't be able to flash the zips. After that you can flash back stock boot and recovery, and you *should* be able to update via OTA.
Here's a little guide for getting HW and public for your build: https://forum.xda-developers.com/showpost.php?p=71302827&postcount=627
Also, question: What update are you trying to apply? It might just be that it's not approved by Huawei yet, and that makes it impossible to install using Firmware Finder.
And if you're trying the Dload method, it won't work. Only 2 offline firmwares have been released.
Edit: I should learn to read. So you're trying Dload? Yeah, that won't work.
I guess you could install your current full firmware using Firmware Finder, but for that you'd still need to flash back HW and Public so you can actually see the System Update button.
And that means flashing back TWRP, and flashing to /data requires decrypting, so you'd have to do that as well.
ante0 said:
You will have to flash back hw and public zips for your build. There's a folder (hw_init) in /data/ that gets wiped when you format data, it contain apps (system update for example) and the theme engine.
So you will have to flash back TWRP again and decrypt again if you went back to stock, else you won't be able to flash the zips. After that you can flash back stock boot and recovery, and you *should* be able to update via OTA.
Here's a little guide for getting HW and public for your build: https://forum.xda-developers.com/showpost.php?p=71302827&postcount=627
Also, question: What update are you trying to apply? It might just be that it's not approved by Huawei yet, and that makes it impossible to install using Firmware Finder.
And if you're trying the Dload method, it won't work. Only 2 offline firmwares have been released.
Edit: I should learn to read. So you're trying Dload? Yeah, that won't work.
I guess you could install your current full firmware using Firmware Finder, but for that you'd still need to flash back HW and Public so you can actually see the System Update button.
And that means flashing back TWRP, and flashing to /data requires decrypting, so you'd have to do that as well.
Click to expand...
Click to collapse
My Stuck rom is MHA-L29C185B110 and since I didn't find this one I extracted the boot.img from MHA-L29C185B126 and used it
I also download the public and Hw zip for MHA-L29C185B126 rom and flash those
When I boot up the camera Icon is gone as for Settings
but the update option is now avalible in settings and it suggest build 156 but when I hit quick update it gives me a popup that says Download failed
any Idea ???
badboy_6120 said:
My Stuck rom is MHA-L29C185B110 and since I didn't find this one I extracted the boot.img from MHA-L29C185B126 and used it
I also download the public and Hw zip for MHA-L29C185B126 rom and flash those
When I boot up the camera Icon is gone as for Settings
but the update option is now avalible in settings and it suggest build 156 but when I hit quick update it gives me a popup that says Download failed
any Idea ???
Click to expand...
Click to collapse
You have to flash public first than hw_data not the opposite.
gm007 said:
You have to flash public first than hw_data not the opposite.
Click to expand...
Click to collapse
I used this method that our friend suggest in post 2
UNLOCK YOUR BOOTLOADER
02-FLASH TWRP 3.0.2-2 (thanks to @Tkkg1994) using ADB
03-Boot into TWRP (HOLD VOL up + POWER)
03(a)-Backup your Boot thru TWRP into your ext SD or OTG(optional)
04-Format Data in TWRP
05-Flash superRoot.zip (thanks to @ante0 for this)
06-Flash Public_data.zip if you are on build L29C636 u can use THIS
07-Flash Full_HW_data.zip(you will get error 7 but it still went thru)if you are on build L29C636 u can use THIS
***how to obtain files for step 6&7 Read THIS thanks to @gm007
08-Boot into system (setup ur phone)
09-Install PHH superuser from playstore.
badboy_6120 said:
I used this method that our friend suggest in post 2
UNLOCK YOUR BOOTLOADER
02-FLASH TWRP 3.0.2-2 (thanks to @Tkkg1994) using ADB
03-Boot into TWRP (HOLD VOL up + POWER)
03(a)-Backup your Boot thru TWRP into your ext SD or OTG(optional)
04-Format Data in TWRP
05-Flash superRoot.zip (thanks to @ante0 for this)
06-Flash Public_data.zip if you are on build L29C636 u can use THIS
07-Flash Full_HW_data.zip(you will get error 7 but it still went thru)if you are on build L29C636 u can use THIS
***how to obtain files for step 6&7 Read THIS thanks to @gm007
08-Boot into system (setup ur phone)
09-Install PHH superuser from playstore.
Click to expand...
Click to collapse
Hi there,
I am having similar issues, but the THIS in your post is just text? I am a novice to the Mate 9 and am trying to get my system update back It failed when I tried to go to B136 via FF
Use this https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page36
Rebrand to c636 it will be easier for you to go back to stock anytime,and faster update.
gm007 said:
Use this https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page36
Rebrand to c636 it will be easier for you to go back to stock anytime,and faster update.
Click to expand...
Click to collapse
Thanks for that. Do I have to do a full wipe if coming from a MHA-L09C34B122?
gm007 said:
Use this https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page36
Rebrand to c636 it will be easier for you to go back to stock anytime,and faster update.
Click to expand...
Click to collapse
Thanks man, It really worked:good::good:
I'm running on Stuck Rom again :victory::victory:
Hi guys,
what are the exact steps to go back to stock with a clean "System Image" for taking ota updates?
I've made a clean backup via "System Image" in twrp with an unmodified system as stated in the twrp thread before i did anything else (root, etc.).
Thank you in advance
You dont need to. You can flash via ruu zip. Just use the same firmware as the phone is on now.
shivadow said:
You dont need to. You can flash via ruu zip. Just use the same firmware as the phone is on now.
Click to expand...
Click to collapse
Thank's for the reply. But this was not the questions (please don' be mad). But what if i want to?
I did backup the stock recovery and a System Image backup prior to flashing TWRP via fastboot boot twrp-3.1.1-0-ocn.img (point 4/6 in the twrp thread).
What would be the exact steps? Can I just boot normal to twrp-recovery an restore the system image and the stock recovery? Like this:
Thank you in advance
shivadow said:
You dont need to. You can flash via ruu zip. Just use the same firmware as the phone is on now.
Click to expand...
Click to collapse
Flashing RUU via recovery breaks the ability to take OTAs, correct? Where as running RUU exe doesn't? I think i read this somewhere in the xda ruu collection thread.
Hello,
I recently unlocked the bootloader and installed TWRP as custom recovery, but I'm now in need to return full-stock:
could anyone please tell me (or link me - I searched but I didn't found anything about it) a full procedure to restore the phone status?
I need a stock ROM, I guess, but then what? Flash it in TWRP? Does it also include stock recovery or is it a separate file instead?
Thank you very much!
shakathesaint said:
Hello,
I recently unlocked the bootloader and installed TWRP as custom recovery, but I'm now in need to return full-stock:
could anyone please tell me (or link me - I searched but I didn't found anything about it) a full procedure to restore the phone status?
I need a stock ROM, I guess, but then what? Flash it in TWRP? Does it also include stock recovery or is it a separate file instead?
Thank you very much!
Click to expand...
Click to collapse
so you do know that relocking the bootloader will cause a factory reset and all data will be wiped from device.
First, all you need to do is download a full rom update and flash in system local update. that will put stock software and stock recovery back.
second, Reboot phone to bootloader mode. Then you just type in cmd "fastboot oem lock"
MrSteelX said:
so you do know that relocking the bootloader will cause a factory reset and all data will be wiped from device.
First, all you need to do is download a full rom update and flash in system local update. that will put stock software and stock recovery back.
second, Reboot phone to bootloader mode. Then you just type in cmd "fastboot oem lock"
Click to expand...
Click to collapse
Thanks for your fast answer!
So is it better to flash stock ROM through local update than through TWRP? Or it's the same procedure both ways?
Thanks again!
They both will work.
Use the msmdownloadtool it's easiest, safest and fastest way.
Lownita said:
Use the msmdownloadtool it's easiest, safest and fastest way.
Click to expand...
Click to collapse
File name : 6T_MsmDownloadTool_v4.0.58_OOS_v9.0.12
Hi, i have downloaded many times file above, why the said .rar file can not be extracted?
What is content the .rar file above?
Download Source : https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
DancingFate said:
File name : 6T_MsmDownloadTool_v4.0.58_OOS_v9.0.12
Hi, i have downloaded many times file above, why the said .rar file can not be extracted?
What is content the .rar file above?
Download Source : https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Click to expand...
Click to collapse
This is for 6t. Is OP at 6t or 6?
Latest and greatest https://forum.xda-developers.com/oneplus-6/how-to/op6-collection-unbrick-tools-t3914109
These tools will return your phone to 100% stock.
I've use them multiple times.
I recommend using these qualcomm drivers.
https://drive.google.com/file/d/1k1cXnVaz5d2IRLqxFE9AiY8GFMmx3CDG/view?usp=sharing