[Phone Vodafone Smart Turbo 7][ROM][V1.0 - 19/09/17 (DD/MM/YY)]
Code:
*** Disclaimer
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Introduction
If you want to put root and TWRP on your device then you have to commit to this as there is no going back from Alcatel to Vodafone firmware after this unless someone uses the scatter file for this device to perform a readback (SP Flash Tool, search: Hovatek how to make a full backup of your stock ROM using sp flash tool, however, the dev blocks should be gathered straight from the scatter file, not MTK droid tools. Will update this if this happens it is successfully conducted by someone ) This little corner of XDA will show you how to:
Flash Alcatel Firmware
Install Custom Recovery (TWRP/CTR)
Root with SuperSU
Install one custom ROM (Cyanogen MOD 13)
NOTE: I will NOT teach you how to install drivers if you need to do that go to https://forum.hovatek.com/thread-440.html (If you are running Windows 7 and up you need to disable 'Driver Signature Verification', this link will show you how to do it: https://forum.hovatek.com/thread-752.html
If you can't figure out how to that by yourself (everything is a google search away) then you shouldn't even attempt any of this.
All files will be on AndroidFileHost
If you want to download all the files for all the tutorials, then you can download the complete package which has everything required for the tutorials (except for drivers of course)
Click to expand...
Click to collapse
Installation instructions
All instrucrions are in this set of Youtube videos that I MADE
(link) VFD501 Playlist
Custom ROMs
For Mokee
Boot to recovery
Wipe data/factory reset, wipe system, wipe cache
Install ROM then GAPPS
Reboot
For Resurrection Remix/RR
Boot to recovery
Wipe data/factory reset
Install ROM then GAPPS
Reboot
Click to expand...
Click to collapse
Download
All Packages are now located on AFH (android file host) -----> Here
{Download GAPPS from here Selections are ARM, 7.1/6.0.1 (Depending on ROM Version), and any package you want (preferably aroma or pico) }
SP Flash Tool: Here (You don't need this if you have the 'Flash VFD to Alcatel Package')
Click to expand...
Click to collapse
Changelog
Code:
Current changelog: 19/09/17 = DD/MM/YY
[note] -- insert note
[new] -- insert new - [link to commit if applicable]
[changed] -- insert changed - [link to commit if applicable]
[fixed] -- insert fixed - [link to commit if applicable]
Older changelogs:
Code:
Changelog: -- insert date
[note] -- insert note
[new] -- insert new - [link to commit if applicable]
[changed] -- insert changed - [link to commit if applicable]
[fixed] -- insert fixed. - [link to commit if applicable]
Click to expand...
Click to collapse
FAQ
Ask Questions in Disscussion
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* RootJunky (Inspiration to work with Android)
* @CVAngelo (For making me want to prove him wrong, lol)
XDA:DevDB Information
Vodafone Smart Turbo 7 / VFD 501 / VFD 500, ROM for all devices (see above for details)
Contributors
Jamalama
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android 6.0 Marshmello
Based On: Stock Alcatel ROM
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2017-09-19
Beta Release Date: 2017-09-19
Created 2017-09-19
Last Updated 2018-08-09
Reserved
Success, All files will now be uploaded to Androidfilehost
Reserved
NOT done yet
not done yet
I have questions......
Since Google keeps crashing me out of apps and breaking my brightness control to send me ads and try to get me to install experimental zombies this past month, I'm keen to try this on my VFD501 Vodafone Smart Turbo 7 but.....
Does the initial step have to be Alcatel? I only ask because my SIM is 2 Degrees and I don't know if it'll work with it as it's a bit sketchy while it's still thinking it's a Vodafone.
Is the second step the ONLY rom it'll work with? How far can the hardware be pushed or more efficient?
Lastly, would I still be able to get updates for the usual app suspects? I'm getting further into Minecraft now there's online server games and I'm not finding any options for updates other than through the Play Store. I also watch quite a bit of YouTube on it (another Google aquisition). Would these be denied me by the EvilCorp™ once I free my phone from it's clutches and get rid of Google Movies, Google Mail, Google other bloatware aside from Books where I have several and would like to keep reading them?
HIe, when can we get the custom rom.looks great.
Do you still have the mixed Spanish English rom?
Could you post that please if you still have it? When i installed the cyanogenmod after flashing to alcatel after locking the screen and turning it on again it won't render properly anymore, i just see random lines. Thank you in anticipation!
guys, please can anyone make a backup (TWRP)of stock ROM with /system /data /FRP /protect /boot ? with any google account please.
i want to unlock FRP on my vfd500, i gorgot my google account on this phone so i cant go pass setup wizzard, thanks
Vamptonius said:
Since Google keeps crashing me out of apps and breaking my brightness control to send me ads and try to get me to install experimental zombies this past month, I'm keen to try this on my VFD501 Vodafone Smart Turbo 7 but.....
Does the initial step have to be Alcatel? I only ask because my SIM is 2 Degrees and I don't know if it'll work with it as it's a bit sketchy while it's still thinking it's a Vodafone.
Is the second step the ONLY rom it'll work with? How far can the hardware be pushed or more efficient?
Lastly, would I still be able to get updates for the usual app suspects? I'm getting further into Minecraft now there's online server games and I'm not finding any options for updates other than through the Play Store. I also watch quite a bit of YouTube on it (another Google aquisition). Would these be denied me by the EvilCorp™ once I free my phone from it's clutches and get rid of Google Movies, Google Mail, Google other bloatware aside from Books where I have several and would like to keep reading them?
Click to expand...
Click to collapse
So far you have to flash Alcatel to do any modding whatsoever, however, I may have a solution so we can get root on VFD 500 running Vodafone stock but not VFD 501 (however I'm begging my friend to borrow his to do a Miracle Box Backup so fingers crossed :silly: so I can get the 501 version of the Vodafone OS) if the solution works I will release a video on it, if you want to know if you have to flash Alcatel for custom ROMs yes you need Alcatel for the ROMs there is currently no ROMs for this device, and I don't know how to make and edit ROMs just gonna put that out their
Not working for me. Format completed OK. but then error "S_FT_ENABLE_DRAM_FAIL (0xFC0)" given when doing the download and format. Vodafone VFD501, used scatter file provided, drivers appear to be installed ok except i get "MediaTek USB port" used by the firmware loader. "MediaTek Preloader USB VCOM Port" stays even when phone is not plugged in and had yellow triangle
squowse said:
Not working for me. Format completed OK. but then error "S_FT_ENABLE_DRAM_FAIL (0xFC0)" given when doing the download and format. Vodafone VFD501, used scatter file provided, drivers appear to be installed ok except i get "MediaTek USB port" used by the firmware loader. "MediaTek Preloader USB VCOM Port" stays even when phone is not plugged in and had yellow triangle
Click to expand...
Click to collapse
Solved now using this rom and instructions.
Can't post links so google - Download Vodafone Stock Rom for all models - Android MTK and look for VFD500 in the list
The driver tool uninstalled lots of drivers i think this may have helped it use the "MediaTek Preloader USB VCOM Port" which allowed it to write to the phone. Took about 10-15 mins to boot afterwards, I thought it was stuck but just a slow phone
After falsh Vodafone Smart Turbo 7 VDF 500
Hi I followed the whole procedure everything works fine if I do not press the power button so that his left in standby everything works as it should this rom is beautiful until my vodafone Vodafone Smart Turbo 7 VDF 500 goes on standby the screen becomes blurry if I do not press the start / stop button so that his parte in standby everything works as it should this rom is beautiful I would have to remove the battery and I put it back for his return normally Help me please.
Vodafone Smart Turbo 7 V 500 goes on standby the screen becomes blurry after flash
Hi I followed the whole procedure everything works fine if I do not press the power button so that his left in standby everything works as it should this rom is beautiful until my vodafone Vodafone Smart Turbo 7 V 500 goes on standby the screen becomes blurry if I do not press the start / stop button so that his parte in standby everything works as it should this rom is beautiful I would have to remove the battery and I put it back for his return normally i use the custom rom all stock rom not run
Hello community
Can someone please give me valid links and tutorials for unlock this phone, i´ve been here for more than 6 hours looking on how to do this, but there´s always a software or file missing. I can´t even install the USB drivers, or find a TWRP properly.
What a headache..
Thanks in advance
any luck with finding the required files?
Vodafone_Smart_Turbo_7_VFD500 - RR 7.1 ROM + TWRP 3.0.2 + SP Flash Tool + VFD500_ROM
Hi!
I get a Vodafone_Smart_Turbo_7_VFD500 phone bricked and was very dificult to find a working rom, there are a few that boot but after locking the phone screen goes mad...
I fixed a RR rom, still not perfect but is better.
One kwon issue is charging with phone off, screen stays white and on...
I Let here a link with:
SP_Flash_Tool_v5.1916_Win
SP_USB_Win7_Drivers ( Copy to Desktop and execute the shortcut)
Vodafone_Smart_Turbo_7_VFD500_MT6735M_V2.39.1_21122016_6.0 ROM to flash with SP Tool
open_gapps-arm-7.1-nano-20191029.zip
RR-N-v5.8.5-PIXI4_5_4G.zip (Fixed) Rom
TWRP3.0.2-0_VDF500.img Recovey (Use SP Tool with MT6735M_Android_scatter.txt from Vodafone ROM to flash it)
To use SP tool, first install the drivers then open SP tool, search for MT6735M_Android_scatter.txt file. To install full Vodafone ROM click in Download only and select Format All + Download then Download key above and plug USB, to install TWRP unselect all and only select recovery and click in location field, search for TWRP, click in download from above and plug USB ( If faild with error you need to flash all Vodafone ROM first).
After all this, use TWRP to flash RR Rom then Gapps.
Mega.nz Link
I hope this helps you to!!!
persona78 said:
Hi!
I get a Vodafone_Smart_Turbo_7_VFD500 phone bricked and was very dificult to find a working rom, there are a few that boot but after locking the phone screen goes mad...
I fixed a RR rom, still not perfect but is better.
One kwon issue is charging with phone off, screen stays white and on...
I Let here a link with:
SP_Flash_Tool_v5.1916_Win
SP_USB_Win7_Drivers ( Copy to Desktop and execute the shortcut)
Vodafone_Smart_Turbo_7_VFD500_MT6735M_V2.39.1_21122016_6.0 ROM to flash with SP Tool
open_gapps-arm-7.1-nano-20191029.zip
RR-N-v5.8.5-PIXI4_5_4G.zip (Fixed) Rom
TWRP3.0.2-0_VDF500.img Recovey (Use SP Tool with MT6735M_Android_scatter.txt from Vodafone ROM to flash it)
Mega.nz Link
I hope this helps you to!!!
Click to expand...
Click to collapse
Unbelievable. I'll give it a go later thanks
Related
I hold no responsibility to how you use or not use this info and if you brick phone - you do this at your own risk
Mini How To
How to install recovery and custom ROMs
Changelog and Downloads
2011-02-11
IMPORTANT NOTE: I have not tested this ROM as I not own U8150 anymore
FILENAME: U8150V100R001C191B822_021211_094422.zip
MD5: 110c084c71729aca1ea8361dcb5fe5f5
* Reverted back to Launcher2
* Added Apps2SD
* Add couple apps I think is useful: wifi analyzer, android terminal, alogcat, cache cleaner-ng. (these can be easily uninstalled)
* Built with latest kitchen 0.120
* Removed Gingerbread keyboard and Google Goggles
2011-01-15
FILENAME: U8150V100R001C191B822_011511_221843.zip / Mirror
MD5: 357e5efb21d3272bb0820c0e14cfe913
* Added Boot Animation - Android Scribble 2.0 no flare
* Added Gingerbread Keyboard - Renamed Gingerbread Keyboard - updated 2010-12-28
* Unlocked Market - thanks xxhp for the package
* Added Google Goggles and AdFree
2011-01-09
This ROM should have overall better performance(hopefully)
Note:
Do a wipe of data and must clear dalvik-cache because of JIT being enabled (under 'wipe' in AmonRA Recovery 1.6.2 ROM)
FILENAME: U8150V100R001C191B822_010911_182214.zip
MD5: d8fae03567ebfa1602a116cc9e5aa587
* Added more ring tones from CM rom
* Ring delay fix
* CDRom symlink fix
* Fixed proximity delay (phone come off of the "black screen" faster)
* Turned Automatic brightness ON
* Now wifi will scan once every 1 minutes when not around a known location.
Help minimize battery drain.
* Added JIT
* Set Setup Wizard to run 'Optional'
2011-01-05 Initial Release
FILENAME: U8150V100R001C191B822_010511_014603.zip
MD5: 059fe7693164b1031a63fce373d57717
* Rooted (Superuser.apk + su)
* BusyBox installed
* /system/framework is deodexed
* /system/app is deodexed
* twitter/facebook/documents2go moved to /data/app
* swapped out Launcher 2 for Zeam Launcher
* Apps like Gmail, Maps, Vending etc updated.
If you like my work please make a donation via the Donate to me button on the left
Enjoy
Thanks for the update quail!
Do you have the AUS version of the Ideos? If so, who'd you get yours from?
Also, can we use this thread as a ROM request? (i.e. overclocking ability, gingerbread development)
Thanks. But can you plz post a guide or give a link on how to install the modified ROM in IDEOS for noobs like me
hachoo said:
Thanks for the update quail!
Do you have the AUS version of the Ideos? If so, who'd you get yours from?
Also, can we use this thread as a ROM request? (i.e. overclocking ability, gingerbread development)
Click to expand...
Click to collapse
Yes I have the AU version and I bought a Crazy Johns pack with 4GB micro HCSD carded included from Aus. Post for 159AUD. I was luck and go one that was not locked to any network.
Yes you can use the thread for ROM requests, I personally will be ignoring requests for OCing, as there is a very nice little app called setCPU which works great on the U8150.
[How to] install recovery and custom ROMs
I hold no responsibility to how you use or not use this info and if you brick phone - you do this at your own risk
Part 1 Installing Recovery ROM
Please refer to this post before flashing Recovery ROM - AmonRA Recovery 1.6.2 and BLUE Screen
The custom recovery allows you to do all sorts of lovely things such as installing ROM update zips (for the forthcoming custom ROMs), wiping various parts of the device, backing up and restoring and much more.
You can enter recovery mode - turn it off, then press the power button while holding the 'volume up' and 'send' (green).
Downloads
AmonRA Recovery 1.6.2 - DOWNLOAD (MediaFire Pro) / MIRROR (CoBlitz / ROMraid) - MD5: 65d4dcbbedb956a9f88dd1981fb31ef8
How to install - Windows, Linux and OSX
Download the recovery image of your choice above and extract the zip file
Put your device in bootloader mode - turn it off, then press the power button while holding the 'Volume Down' and 'End (Red)' keys
WINDOWS - double click 'install-recovery-windows.bat'
MAC - Open a terminal window to the directory containing the files, and type 'chmod +x install-recovery-mac.sh' followed by './install-recovery-mac.sh'
LINUX - Open a terminal window to the directory containing the files, and type 'chmod +x install-recovery-linux.sh' followed by './install-recovery-linux.sh'
Part 2 Installing Custom ROM
Note: When using the Custom Recovery image use the Trackball to move up / down and press to select. Use the volume down button to go back.
Download a Custom ROM of your choice and place the ENTIRE ZIP (Do not extract it) onto the root of your SD card. By "Root" I mean do not place the file in any subfolders
Enter recovery mode - turn it off, then press the power button while holding the 'volume up' and 'send' (green).
From Custom Recover Main menu and select the 'Backup/Restore' option. Choose a 'Nand backup' and let it run it's course
Return to the Custom Recover Main menu and select the 'Wipe' option. Choose the First option 'Wipe data/factory reset' and confirm. <- this is optional after installing one of my ROMs. I personally have not bothered with it with my ROMs
Return to the Custom Recover Main menu and select the 'Flash zip from sdcard'. Select the custom rom you wish to flash, confirm and wait.
Part 3 Restoring back to original ROM
Note: Upgrade operations will erase the user data.
Find and Download ROM from Link provided on WiKi that you want to install
Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the MICRO SD card.
Make sure your handset is power off. Insert the MICRO SD card into the handset. Pressing the END key and VOLUME UP key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
You can see process bar start from 0 on the screen. (this take a few minutes)
Then the handset will restart automatically. Then it is OK.
Reference:
Part 1 info taken from here
quail said:
Yes I have the AU version and I bought a Crazy Johns pack with 4GB micro HCSD carded included from Aus. Post for 159AUD. I was luck and go one that was not locked to any network.
Yes you can use the thread for ROM requests, I personally will be ignoring requests for OCing, as there is a very nice little app called setCPU which works great on the U8150.
Click to expand...
Click to collapse
I got the same deal!
Have you played around with the kernel at all? I'm not experienced in programming etc. but apparantly to OC the IDEOS U8150 more than 600mhz (setcpu does this automatically), it needs a kernel hack like other phones do.
Trekker56 said:
Thanks. But can you plz post a guide or give a link on how to install the modified ROM in IDEOS for noobs like me
Click to expand...
Click to collapse
Sorry I did think to add a how to install recovery/custom ROM how to, well there is one now.
Thanks
hachoo said:
I got the same deal!
Have you played around with the kernel at all? I'm not experienced in programming etc. but apparantly to OC the IDEOS U8150 more than 600mhz (setcpu does this automatically), it needs a kernel hack like other phones do.
Click to expand...
Click to collapse
I have played around with Linux Kernels in the past just not the Android kernel yet... but I am sure it not that hard to patch it and recompile.
I am happy with the 600MHz that setCPU unlocks it too.
quail said:
You can enter recovery mode - turn it off, then press the power button while holding the 'volume up' and 'send' (green).
[*] Put your device in bootloader mode - turn it off, then press the power button while holding the 'Volume Down' and 'End (Red)' keys
Click to expand...
Click to collapse
The Main thinkg about these two parts here, when i enter recovery mode i get a blue screen is that right... nothing BUT a blue screen.
When i try to enter the bootloader mode it stays on the IDEOS logo, the first one when you turn it on...
Also im guessing it has to be plugged into the usb at all times for these.
tankknat said:
The Main thinkg about these two parts here, when i enter recovery mode i get a blue screen is that right... nothing BUT a blue screen.
When i try to enter the bootloader mode it stays on the IDEOS logo, the first one when you turn it on...
Also im guessing it has to be plugged into the usb at all times for these.
Click to expand...
Click to collapse
You should not be getting a blue screen, you sure your using the correct key combination?
Yes you need the USB cable plugged in to use the bootloader. Yes the bootloader is ment to just sit at the IDEOS logo
yeah im 100% sure i used the correct key combo for the restore recovery mode, and sweet as for the bootloader, just wasnt 100% sure on that one.
Thank you OP for the info here, I used them to flash the recovery and I'm going to flash your ROM.
Having a Desire from the very first day I'm not new to these things, but this little boy is in my hands since this afternoon and it's amazing that you came with this just in time.
Will report back in a while with impressions.
OK, here I am. Just attempted to flash the ROM (after a full wipe), but it fails with an "Installation aborted." message just after the ISO symlink one. Looking at the update script, I guess there was a problem while flashing the BOOT partition.
Rebooting into the OS result in the new (rooted) ROM, but something is missing: the build.prop is likely the old one (I still see the old build string) and I have only 118 MB of free NAND space.
Coming from the Vodafone Italy ROM.
Any hint?
@ngel said:
OK, here I am. Just attempted to flash the ROM (after a full wipe), but it fails with an "Installation aborted." message just after the ISO symlink one. Looking at the update script, I guess there was a problem while flashing the BOOT partition.
Rebooting into the OS result in the new (rooted) ROM, but something is missing: the build.prop is likely the old one (I still see the old build string) and I have only 118 MB of free NAND space.
Coming from the Vodafone Italy ROM.
Any hint?
Click to expand...
Click to collapse
What package did you download? I forgot to test one my builds and aborted installation on me, but I have fixed it and already put up a work version. Please try the newer version
quail said:
What package did you download? I forgot to test one my builds and aborted installation on me, but I have fixed it and already put up a work version. Please try the newer version
Click to expand...
Click to collapse
Hi, I flashed "U8150V100R001C191B822_010711_042603", the one I guess is the newest (despite the "2010" typo on the first post ).
Is there a newer one?
@ngel said:
Hi, I flashed "U8150V100R001C191B822_010711_042603", the one I guess is the newest (despite the "2010" typo on the first post ).
Is there a newer one?
Click to expand...
Click to collapse
thanks, fixed the typo.
ATM there is no newer version.
@ngel said:
OK, here I am. Just attempted to flash the ROM (after a full wipe), but it fails with an "Installation aborted." message just after the ISO symlink one. Looking at the update script, I guess there was a problem while flashing the BOOT partition.
Rebooting into the OS result in the new (rooted) ROM, but something is missing: the build.prop is likely the old one (I still see the old build string) and I have only 118 MB of free NAND space.
Coming from the Vodafone Italy ROM.
Any hint?
Click to expand...
Click to collapse
Another thing I am not sure what the diff is between the Italian ROM and the Australian ROM. I wonder if you phone is not fully compatible with the Australian ROM?
ARGH, ok not good...
booted up to flash my loving ideos and i think i killed it...
'Firemware update step 1/2
Unpacking
[=============] (thats a progress bar
!
update failed
and all my buttons are blinking...
First version working
I had the same problems as @ngel using the newer version. Fail with the iso symlink.
Used the first version you posted up and that worked without a problem.
Zeam Launching is really snappy. Or I just haven't bogged down my phone with a whole bunch of crap yet.
Thanks for your work I bought my Ideos through 2 Degrees in New Zealand.
Request:
I quite like the look of the black notification bar and green icons. Would you be able to theme this rom with those? Also could you include the gingerbread keyboard. I know I can install it separately but would be cool to have Touch Pal and the original keyboard removed and replaced with the gingerbread one.
tankknat said:
ARGH, ok not good...
booted up to flash my loving ideos and i think i killed it...
'Firemware update step 1/2
Unpacking
[=============] (thats a progress bar
!
update failed
and all my buttons are blinking...
Click to expand...
Click to collapse
Did you power on your unit holding the 'volume up' and 'red' key?
Recovery BootStrap (TWRP) - Motorola Defy\Bravo
Version: 4.0
Install Recovery BootStrap (TWRP) for Motorola Defy\Bravo via a USB cable. For computers running the Windows\Linux (port version) operating system.
Download: (Windows: MEGA / Google Drive) | (Linux: port by nastys post>>)
Install Recovery BootStrap (TWRP) you can right out stock firmware (without custom recovery) with superuser.
Recovery BootStrap (TWRP) - for the recovery say thank Quarx, after installation, you can install the rom CyanogenMod from Quarx for December 2014 (but do not forget about resize.zip).
Can be installed on Defy (MB525), Defy Plus (MB526), Bravo (MB520).
Requirements for smartphone:
Enable USB debugging
Superuser (ROOT)
Free space on the memory card of 100 megabytes
Instructions:
1. Download the archive
2. Unpack it somewhere else with a short path, for example D:\andro
3. Connect your phone via USB cable ("debugging on USB" should be included)
4. Run the install_bootstrap.cmd
5. When you see the label "Let's Start? =)", press any key
6. If the superuser ask permission for full access "ADB Shell", allow.
7. After installing the smart phone will automatically restart
!IMPORTANT! after restarting the Stock firmware will not start!, but you will have BootStrap (TWRP) so you can safely install custom firmware\rom
Change log:
V3:
Changed how the script
Fixed installation errors recovery on Android 4.x and later
V4:
The script changed drastically
After installation removes trash from the memory card (so far only on Android 4.x and later)
Made for normal (mortals) users , before you start the installation script checks (by model) which smartphone connected to the computer, if your smartphone is not supported script report it and stop installation, if supported will give something "Device: MB525".
Serviceability checked on the Chinese 231 (Defy) firmware with superuser (what say thank borndead), and on the Asian 231 (Defy)
Questions\FAQ:
Error "[ERROR] Verify device!", what to do?
Error "[ERROR] Verify device!", it is may mean the following:
1. You have not enabled USB debugging
2. Your smartphone does not support this Recovery. (only for MB525, MB526, MB520)
3. You need to confirm the action ADB on your smartphone
4. Or you have some other connection problems
Stock transition to CyanogenMod 11 of Quarx
Stock transition to CyanogenMod 11 (firmware and find all necessary files can be here) of Quarx in short (generally as described on the website Quarx, only simpler and under Windows)
1. Install Recovery BootStrap (TWRP) via USB
2. Enter Recovery install resize.zip
3. Restart your smartphone
4. Install CyanogenMod 11 and GApps
Good work, comrade! I flashed CM11 on the Moto Defy - everything works!
We did observed some cases, where a "new life (resized)" Defy is not booting anymore. Only solution was to reflash SBF and start from scratch.
Does this mean, it is possible to recover TWRP from PC? That would be a step a head!
This is amazing! Everytime I needed to reflash the stock ROM I needed to install cm10, then cm11, then new bootsrap etc...
Unfortunately I don't use Windows...
@Octanium91 Would you mind if I port your script to GNU/Linux?
starbright_ said:
We did observed some cases, where a "new life (resized)" Defy is not booting anymore. Only solution was to reflash SBF and start from scratch.
Does this mean, it is possible to recover TWRP from PC? That would be a step a head!
Click to expand...
Click to collapse
I tried to do something like that, is not yet happened. Perhaps in the future even try
nastys said:
This is amazing! Everytime I needed to reflash the stock ROM I needed to install cm10, then cm11, then new bootsrap etc...
Unfortunately I don't use Windows...
@Octanium91 Would you mind if I port your script to GNU/Linux?
Click to expand...
Click to collapse
Maybe. If Iunderstand with GNU/Linux scripts
The new version, V4
The new version, V4
Changes:
The script changed drastically
After installation removes trash from the memory card (so far only on Android 4.x and higher)
More debugging: Now the script itself is not closed, and tells the user exactly what happened.
Sorry debris removal only works on Android 4.x and later.
Linux port done!
@Octanium91 I ported it to C++ (for Linux only at the moment). Please add it to the first post . Here is the link: MediaFire | MEGA
On Ubuntu just mount the ISO as image (not archive) then click 'Run' (or you can also extract the ISO and run the executable directly). It works on x86 (32 bit) and x86_64 (64 bit) CPUs. The source code is also included in the ISO. Tested on Ubuntu 14.10 and 16.04 (64 bit).
I tested it with both stock 2.3.6 rooted and CM11. It seems that the stock ROM won't boot after flashing the new bootstrap, but the recovery works fine
Also your version has a very bad bug: it flashes Defy bootstrap even on Bravo!!! It should flash Motorola Bravo specific bootstrap instead. My version only works for Motorola Defy and Defy+ at the moment, but you can edit the source code. EDIT: they are the same file with different names. I updated my version to support MB520.
After run the command script, when i boot in TWRP SDcard shows 0mb.
Already tried flashing the SBF recommended by quarx and after that the root SBF, but the result is always the same.
With CM recovery i can see the SDcard properly, but after the resize, or bootstrap, i always get 0mb at SDcard.
Any help?
Thanks!
evilinheaven said:
After run the command script, when i boot in TWRP SDcard shows 0mb.
Already tried flashing the SBF recommended by quarx and after that the root SBF, but the result is always the same.
With CM recovery i can see the SDcard properly, but after the resize, or bootstrap, i always get 0mb at SDcard.
Any help?
Thanks!
Click to expand...
Click to collapse
Format your SD card (to FAT32) or use another one.
Octanium91 said:
The new version, V4
Changes:
The script changed drastically
After installation removes trash from the memory card (so far only on Android 4.x and higher)
More debugging: Now the script itself is not closed, and tells the user exactly what happened.
Sorry debris removal only works on Android 4.x and later.
Click to expand...
Click to collapse
nastys said:
@Octanium91 I ported it to C++ (for Linux only at the moment). Please add it to the first post . Here is the link: https://www.mediafire.com/folder/candnhxj8aovj/Defy_Bootstrap_Installer_for_Linux
On Ubuntu just mount the ISO as image (not archive) then click 'Run'. It works on x86 (32 bit) and x86_64 (64 bit) CPUs. The source code is also included. Tested on 14.10 x86_64.
I tested it with both stock 2.3.6 rooted and CM11. It seems that the stock ROM won't boot after flashing the new bootstrap, but the recovery works fine
Also your version has a very bad bug: it flashes Defy bootstrap even on Bravo!!! It should flash Motorola Bravo specific bootstrap instead. My version only works for Motorola Defy and Defy+ at the moment, but you can edit the source code.
Click to expand...
Click to collapse
Greetings guys, I'm a user from the Atrix 2 section and a part of the current device supporters there. It's a pleasure to finally post here, 'the domain of Quarx' haha.
I was wondering if this recovery is able to flash and boot android Lollipop 5.0 roms yet? If so, then is there some way to port it from source to my or other similar Moto devices in the OMAP bracket with locked bootloaders?
I'm an Android novice, but I'm experienced in building custom recoveries and roms, as well as beginner git commands, so no need to hold anything back, lol. I appreciate the work you're all doing here, please continue to make the difference. Thanks for reading this and take care!
answer
Aceofzeroz said:
Greetings guys, I'm a user from the Atrix 2 section and a part of the current device supporters there. It's a pleasure to finally post here, 'the domain of Quarx' haha.
I was wondering if this recovery is able to flash and boot android Lollipop 5.0 roms yet? If so, then is there some way to port it from source to my or other similar Moto devices in the OMAP bracket with locked bootloaders?
I'm an Android novice, but I'm experienced in building custom recoveries and roms, as well as beginner git commands, so no need to hold anything back, lol. I appreciate the work you're all doing here, please continue to make the difference. Thanks for reading this and take care!
Click to expand...
Click to collapse
Hi!
flash and boot android Lollipop 5.0 roms - just can not say, but it is theoretically possible (need to check).
If so, then is there some way to port it from source to my or other similar Moto device - No, this is not possible (specifically, in this case). BUT this method you can set recovery to another smartphone (it is theoretically, need to try)
Here recovery that are in the public domain, I think that they can install Lollipop 5.0 roms - TWRP2 \ Safestrap
Moto devices in the OMAP bracket with locked bootloaders? - Most likely will not work, but no one stops to try
Octanium91 said:
Hi!
flash and boot android Lollipop 5.0 roms - just can not say, but it is theoretically possible (need to check).
If so, then is there some way to port it from source to my or other similar Moto device - No, this is not possible (specifically, in this case). BUT this method you can set recovery to another smartphone (it is theoretically, need to try)
Here recovery that are in the public domain, I think that they can install Lollipop 5.0 roms - TWRP2 \ Safestrap
Moto devices in the OMAP bracket with locked bootloaders? - Most likely will not work, but no one stops to try
Click to expand...
Click to collapse
Many thanks for the prompt and well ordered reply! I'll look into your suggestions and I'm aware that there aren't many available recovery software for our locked bootloader phones.
We were actually trying to get Safestrap working on our device since last month, but it's failing to work correctly in booting our kexec roms. So I thought I'd ask here since the Defy works by using the 2nd boot like us, but it's still under investigation. Thanks again for your assistance, we're not out of the game yet and we'll get things rolling eventually. Take care!:thumbup:
Sent from the Ace's MB865 using Tapatalk
Error. More than one device and emulator
what am i doing wrong?
LoeWn said:
Error. More than one device and emulator
what am i doing wrong?
Click to expand...
Click to collapse
Perhaps you have not enabled USB debugging
Requirements for smartphone:
Enable USB debugging
Superuser (ROOT)
Free space on the memory card of 100 megabytes
I did enable usb debugging
LoeWn said:
I did enable usb debugging
Click to expand...
Click to collapse
You can send us a screenshot?
I had a successful installation of a december build and twrp 2,6x installed, everything ran just fine. But when the CM tells me there is a update and i download it does not install from recovery, get errormsg. Also apps like rom manager pro tells my phone is not compatible with any updates, and that i should install CWM recovery. So is it possible to install a real CWM on a defy mb526?
Hi, I flashed Recovery BootStrap v4 on the Defy MB525, but its not working. After flash and reboot, phone starts booting, but it ends up with the following screen.
Doesn't matter if I choose Recovery or continue. I can press the menu button (to choose recovery) and nothing happen, till the 3rd press. Than display goes black and thats all .
Any idea where could be the problem or what I'm doing wrong?
Edit: maybe its related to the bootloader version, which is 09.10
Haldy said:
Hi, I flashed Recovery BootStrap v4 on the Defy MB525, but its not working. After flash and reboot, phone starts booting, but it ends up with the following screen.
Doesn't matter if I choose Recovery or continue. I can press the menu button (to choose recovery) and nothing happen, till the 3rd press. Than display goes black and thats all .
Any idea where could be the problem or what I'm doing wrong?
Edit: maybe its related to the bootloader version, which is 09.10
Click to expand...
Click to collapse
Based on first screenshots, Recovery installed. Now you need to install system.
Than display goes black and thats all - maybe have to wait
marcooleo said:
I had a successful installation of a december build and twrp 2,6x installed, everything ran just fine. But when the CM tells me there is a update and i download it does not install from recovery, get errormsg. Also apps like rom manager pro tells my phone is not compatible with any updates, and that i should install CWM recovery. So is it possible to install a real CWM on a defy mb526?
Click to expand...
Click to collapse
In principle it is possible, but it does not make sense.
Infocus M810/T/U thread. (Also wth interesting things for m812 holders.)
Infocus m810 thread on facebook
Note:
All roms on this page are remade to use with Infocus m810 so don't flash on m812. MULTILANGUAGE
Bootloader unlock (m812/m812):
Custom recovery (m810/m812):
SUT flashable images (SUT Factory tool 3.0.8):
SUT 3.1.4 cracked.
Video tutorial SUT flashing on Android 6
ROMS M812(A/I) VN2/PHX:
Android 5.0.2 m812 OFFICAL sut. (Suitable for m810 too) to be used with SUT
cm13 for m812(a) http://forum.xda-developers.com/showpost.php?p=68355126&postcount=1110
ROMS M810(T/I/U):VNA
25/07/16 CM13 beta 2 (release) http://forum.xda-developers.com/showpost.php?p=67901403&postcount=1074
20/03/16 Android 6 custom ROM (ported from m812 ver 617A firmware)
23/02/16 Android 6 custom ROM (ported from m812 ver 6130 firmware)
27/12/15 Android 5.1.1 (internal version 511C(D updated)) (port from m812 ver 511C firmware)
Official Android Kitkat 4.4.2 (VNA-1640-0-00WW-A02)
Older roms
Older ROMs are designed for recovery installation and need some knowledge:
Before the installing of thiose ROMs you must be common with Adb/fastboot driver and installation. working fastboot.exe and adb.exe here
Im the author of this work. So feel free to ask and report.
All you install from here is on your responsibility.
m810.ROM Android 5.0.2: (October 2015) MULTILANGUAGE.
This ROM is full upgrade, so its able to install over Android 4.4.2 ROMS.
How tot install: Russian installation site
1. Put the zip file to sdcard.
2. Connect phone by USB cable. Press and hold volume down+power buttons
(10s), when phone restarts, release power button after vibrating and keep
holding volume down button until FASTBOOT message appear on screen.
3. Download boot recovery https://yadi.sk/d/v_LrtBVdk8pAj and place in fastboot/adb
folder
4. Run in cmd: fastboot boot tw101_recovery_repack_by_titovich.img
5. When recovery booted, Choose firmware UPDATE502_M810_v1.zip and
install.
In the end you should get this error: apply parsed perms lsetfilecon from
/cache to u_object_r:cache_file:s0 failed operation not supported on transport
endpoint set_metadta: some changes failed.
Ignore it. Its issue of recovery.
6 Besides, ROOT and Xposed for 5.0.X framework preinstall can be copied to
sdacard and installed same time after rom installed from boot recovery.
7. Hold power button 10 sec and reboot.
Enjoy.
5.0.2 DOWNLOAD
m810.ROM Android 5.1.1A 08/10/15 The beta version of Lollipop
5.1.1A
ROM from official 511A m812.
Same install instructions as above
Main changes
-Wifi reception better;
-GPS;
-Added buttons config, e-compass, g-sensor calibrations to display menu .
5.1.1 DOWNLOAD.
XPOSED for 5.1.1 . ROOT
Note Xposed from version 5.0 and 5.1 are different!
To flash via SUT:
ODEXED ROM Android 5.1.1B 11/15 The beta version of Lollipop
5.1.1B from official m812 511B update ROM. |For SUT installer. With
unbricking feature.
- ROM designed for odexed files so it contains resized partition for system
(by titovich). means one you install the partition table will remain - 2.5gb for
system. original system parttion is less 2gb. You will be able to install all
m810 roms but I noticed you.
-not for XPLOSED framework. The ROM is full odexed. So don't try Xposed it
will fail;
-minor changes from my side diff to previous ROM;
-fixes from Infocus to battery life.
bugs: haptics not working for hard buttons (to be fixed)
To be installed via SUT utility SUT 3.0.8: DOWNLOAD
-install SUT (drivers will be installed with SUT);
-download zip with nb0 image. Unzip.
-open nb0 image file in SUT.
-Check "Normal Download" and "Erase data".
-Download ignore warning messages.
-Flash will complete in less than 1 min.
5.1.1B for SUT DOWNLOAD LINK2
EOL
Tweaks and enchantments :
M810 service manual
http://forum.xda-developers.com/showpost.php?p=68520451&postcount=1123
Edit boot logo m81X
http://forum.xda-developers.com/showpost.php?p=68956713&postcount=1163
Other party hears the noise durine the phone call
build.prop file
persist.audio.fluence.voicecall=false
Secret codes:
*#*#4636#*#*, *#*#653837#*#*, *#*#76278#*#* Settings.
Note, never tap "USA Band", otherwise you will need to reflash modem part or firmware to make phone back to work.
*#*#873#*#* Upload service
*#*#225#*#* Calendar
*#*#2324636#*#* , *#*#232#*#*, *#*#23273#*#* ,*#*#233#*#*, *#*#231#*#*, *#*#2324678#*#* CDA
*#*#278#*#* CPUDaemon
*#*#324#*#* DebugCfg
*#*#368#*#* Device manager
*#*#3721#*#*, *#*#6721#*#*, *#*#372#*#*, *#*#672#*#*, *#*#4867#*#* High Temperature Monitor
*#*#744#*#*, *#*#628#*#* Mobile Assistant
*#*#787#*#* PackageUsageTool
*#*#227#*#* Pandora Box
*#*#272#*#* Permission Control
*#*#33546#*#* Permission Detection
*#*#793#*#*, *#*#795795#*#* Power Detective
*#*#795#*#* power Monitor
*#*#277#*#*, *#*#3277#*#* Stability Monitor
*#*#28274663#*#* TeleService
Themes pack for 511B/C:
http://forum.xda-developers.com/showpost.php?p=64725810&postcount=429
Disable buttons backlight. (pale blue led shine instead). ROOT needed.
Replace system\lib\hw\lights.msm8974.so to get rid of buttons backlight. Instead, PALE blue led will be on.
Don't forget to backup the original file.
Advanced users can control that API /sys/devices/virtual/input/touch/light_led (with echo 0,1)
There is no any other control to disable or enable it.
XPOSED framework can't do anything too
Noise fix. When party on other side is claiming on noise above your voice.
This is typical issue of dual mic QUALCOMM devices on 5+ Androids. Edit built.prop
persist.audio.fluence.voicecall=true change to false
Enable DIAG port for QXDM (QPST). Rooted.
adb shell
su
setprop persist.sys.usb.config diag,serial,mass_storage,adb
Increase speaker volume
http://forum.xda-developers.com/showpost.php?p=64566136&postcount=330
Sound volume mod working on m810
https://www.youtube.com/watch?feature=player_embedded&v=DOo7sT_JIs8
IMEI, Serial number, MEID, MAC, BT changer. Service tool (m810/m812) DANGEROUS!!!
https://drive.google.com/open?id=0B3Wy4Ok3qGszcmZlMDFCbGdwUjQ
I was trying to follow up this conversation on 4pda but i don't speak russian and google translate does a terrible job.
So a couple of questions:
Is this a multilanguage rom?
Does 2g-3g-4g work?
What about wifi?
Thanks.
will Infocus m810 get android 5.1???
there is an ota update for m812 to android 5.1 but i am unable to find the file.
My phone its on the way.Im interesting this thread
sknipas said:
I was trying to follow up this conversation on 4pda but i don't speak russian and google translate does a terrible job.
So a couple of questions:
Is this a multilanguage rom?
Does 2g-3g-4g work?
What about wifi?
Thanks.
Click to expand...
Click to collapse
Yes, its Multilanguage.
2g-3g-4g work
sknipas said:
there is an ota update for m812 to android 5.1 but i am unable to find the file.
Click to expand...
Click to collapse
If you find it, pls share, it can be used for further development.
@ heineken78
Thanks for coming here at XDA
I am daily following your good works at 4PDA and I am actually with Titovich's 5.02 rooted and i feel more than satisfied.
I take the opportunity to send you my grateful Thanks.
I will install the new update and let comment as well. I hope and wish the system repartitioning will not give any issue ( I don't like playing with root partition!!).
Question: Was not possible to make the system file as lean as possible , eg removing apk that are unnecessary or available at Playstore for everybody choice in order to avoid this modification.
Regards
good work bro. looking for rom based on 5.1 . following this thread
lolo9393 said:
@ heineken78
Question: Was not possible to make the system file as lean as possible , eg removing apk that are unnecessary or available at Playstore for everybody choice in order to avoid this modification.
Regards
Click to expand...
Click to collapse
Stock reserved place in m810 for system partition is ~1,6 gb. Making firmware less, won't bring any changes, unless repartitioning it to lets say 1,1 gb. This operation needs lot of system knowledge from people who will install it.. And profit of changes will be only 500 mb? is nothing.
m812 has partition of 3 gb, that's huge, but suitable for oxdexed roms.
repartition means- you need to change start sectors of emmc in order to set sizes of system, cache. Everything before those partitions remain the same.
Ok, tweak as promised
http://forum.xda-developers.com/showpost.php?p=63576292&postcount=2
Wow,wonderful news... i will test it,downloading...
Hi Guys!
I would like to ask that ROM by titovich, which languages contains?
Thanks
@ heineken78
I've just finished the new Rom install. I followed instructions and had no issue . Rebooted via recovery and installed my stuffs.
-Wifi reception is the same as before and always weaker than my other phones. (minus 8 db)
-GPS IS NOT GETTING ANY FIX. 25 SAT in view and no one fixed.
-New Rom is a HUGE bit of improvement and feel more pleasant and very fast.
-DISPLAY is vibrant and very well set. Automatic mode is perfect also at night reading. good
- Battery leak in stand by is impressively low. less 1% full night. very good
THANKS TO THE TEAM BUILDING FOR THIS REALIZATION.
Can we suggest next challenge to make unlock the 3G 900Mhz Euro Band N°8 in a practical way?
I care less about the 4G...
---------- Post added at 03:52 AM ---------- Previous post was at 03:40 AM ----------
[email protected] said:
Hi Guys!
I would like to ask that ROM by titovich, which languages contains?
Thanks
Click to expand...
Click to collapse
Indonesian/Deutch/ENGLISH/Espanol/Filipino/FRENCH/Portugues/VIET/Russian/chinese/ and 2 symbolic i can't know ....sorry may be Hebreu,
lolo9393 said:
Can we suggest next challenge to make unlock the 3G 900Mhz Euro Band N°8 in a practical way?
I care less about the 4G...
---------- Post added at 03:52 AM ---------- Previous post was at 03:40 AM ----------
Click to expand...
Click to collapse
Yes Im trying that.
But for now, "adb reboot ftm" to reboot in ftm mode and enable qualcomm diag driver.
Then change nv's as written here and here. Uz mztool to calculate right entry's.
@heineken78
Thanks dude!
Its an official or unofficial translated ROM?
Im just ask the reason of hope, maybe put into some more languages too.
Im get this phone yesterday, it looks really great, but enter the recovery and fastboot mode its terrible.
Do you know TWRP or CWM recovery for this phone?
ilhi, i tried to disable backlight with .rar file you attached and it does work but i
heineken78 said:
TWEAKS:
1. Disable buttons backlight. (pale blue led shine instead). ROOT needed.
Replace system\lib\hw\lights.msm8974.so to get rid of buttons backlight. Instead, PALE blue led will be on.
Don't forget to backup the original file.
Advanced users can control that API /sys/devices/virtual/input/touch/light_led (with echo 0,1)
There is no any other control to disable or enable it.
XPOSED framework can't do anything too
Click to expand...
Click to collapse
ilhi, i tried to disable backlight with .rar file you attached and it does work but i can't adjust screen brightness in settings. Now its full bright and can't switch it low or automatic
a1dahiya said:
ilhi, i tried to disable backlight with .rar file you attached and it does work but i can't adjust screen brightness in settings. Now its full bright and can't switch it low or automatic
Click to expand...
Click to collapse
Dude, this is patched driver the from the build on first page. Drivers are different on stock502(titovich) so you may have an issue.
what should i do please help me
heineken78 said:
Dude, this is patched driver the from the build on first page. Drivers are different on stock502(titovich) so you may have an issue.
Click to expand...
Click to collapse
What should I do, please help me out
---------- Post added at 08:46 AM ---------- Previous post was at 08:38 AM ----------
a1dahiya said:
What should I do, please help me out
Click to expand...
Click to collapse
What drivers to change or any other change of value .....?
I'm on stock lollipop 5.0.2 rooted
I also tried to replace the patched file with original which I copied before replacing but nothing helped
Hello,
since many people were asking and asking for all this stuff, I decided to put it all in one post.
Ultimate collection of links for all your Doogee F5 needs
ROMs:
Stock:
2015.10.22 Version: Google Drive
2015.11.19 Version: Google Drive
2016.01.25 Version: Direct Download
If this post is not updated, future updates should be found here: Official websiteCustom:
CyanogenMod 12.1 (WIP)
Recoveries:
TWRP Recovery (needrom.com link) - Outdated
TWRP and PhilZ recoveries
CyanogenRecovery
Tools:
Google USB Driver for ADB Debugging (Direct Download)
F5 Driver for flashing with SP Flash Tool (Extracted from official ROM) (Google Drive link)
F5 Scatter File used for flashing with SP Flash Tool (Extracted from official package) (Google Drive link)
SP Flash Tool v5.1516.00 (Google Drive link)
F5 Root Tool
For developers:
CyanogenMod Device Tree on github
Thats it for now, hope to add more links soon! Post your suggestions below, and I'll probably add them.
Phone can not synchronize contacts, any idea?
Zunera M said:
Phone can not synchronize contacts, any idea?
Click to expand...
Click to collapse
Are you sure you turned on automatic synchronization in phone account settings?
Išsiųsta naudojantis F5 Tapatalk 4 Lt
Just writing here to get notifications from the thread.
Thanks for adding it @MushroomLT
@MushroomLT can you port Lastest lenovo super camera to our device ?
Hi, I tried flashing the TWRP Recovery (downloaded via link in your thread) using the scatter file provided with the revoery image.
While trying to flash, this pops up: "PMT changed for the ROM; it must be downloaded."
I tried to use scatter file downloaded directly from your thread, but after successful flash I can't boot into recovery at all, phone just turns off.
Do I need to use CyanogenRecovery (it works properly)? (I prefer TWRP)
Could you help, please?
NanobotZ said:
Hi, I tried flashing the TWRP Recovery (downloaded via link in your thread) using the scatter file provided with the revoery image.
While trying to flash, this pops up: "PMT changed for the ROM; it must be downloaded."
I tried to use scatter file downloaded directly from your thread, but after successful flash I can't boot into recovery at all, phone just turns off.
Do I need to use CyanogenRecovery (it works properly)? (I prefer TWRP)
Could you help, please?
Click to expand...
Click to collapse
This is a recovery problem, you should contact its dev. Although maybe I'll buil twrp one day if the one out there is that buggy
Išsiųsta naudojantis F5 Tapatalk 4 Lt
MushroomLT said:
ROMs:
Stock:
2015.10.22 Version: Google Drive
2015.11.19 Version: Google Drive
Add 25/01/2016 update. i got it from doogee. link : http://doogee.picp.net:5000/fbsharing/snGdnXCg
Click to expand...
Click to collapse
Does anybody else have slow/fix issues with GPS?
Can anyone confirm the current CM build works without issues?
Sent from my F5 using Tapatalk
killinghall said:
Can anyone confirm the current CM build works without issues?
Sent from my F5 using Tapatalk
Click to expand...
Click to collapse
The current CM build doesn't yet boot. Like it's said in it's thread, it's still in development.
Išsiųsta naudojantis F5 Tapatalk 4 Lt
Philz and TWRP recoveries by @rosexavier here http://forum.xda-developers.com/android/general/doogee-f5-custom-recovery-philz-twrp-t3344696
2016.01.25 Version download link does not work (or maybe i just doesnt work for me?)
I found the file on needrom.com
network problems
I have a Doogee F5 and my network always falls away. He does it sometimes good but every time he falls away. Who can and wants to help me with this. Thanks in advance.
(I posted my question here because I did not know where to place it.)
F5 Flashing Driver doesn't work
I tried to open the Install file but it displays this error
*************************************
*************Information*************
*************************************
Dirver Installer v1.0
Do Not support Win NT earlier version
Press any key to continue...
How can i fix this? i have a soft bricked Dogee F5 and I'm stuck with a bootloop after i tried unsuccessfully to root it...
I'm using windows 10.
PetaX8 said:
Does anybody else have slow/fix issues with GPS?
Click to expand...
Click to collapse
I had GPS slow fix and A-GPS problems also with Stock...
GPS Part is not in this ROM's Engineering Menu available (probably some APK's missing), so I didn't tested it - planing to do it today...
But this ROM is fast and all works stable, very good to start with.
I miss some Features seen in Stock and CM:
- Virtual Operator Network Name not shown - only real network - in Stock ROM it was OK
- no National Data Roaming feature (only Data Roaming), saw this on some CM builds and Samsung phones
- if I'm in roaming I don't see the connected data technology (4G,3G,H,E,G) - only the R standing for Roaming - in national data roaming (Virtual operators) is it annoying - but data works OK.
doogee y8
MushroomLT said:
Hello,
since many people were asking and asking for all this stuff, I decided to put it all in one post.
Ultimate collection of links for all your Doogee F5 needs
ROMs:
Stock:
2015.10.22 Version: Google Drive
2015.11.19 Version: Google Drive
2016.01.25 Version: Direct Download
If this post is not updated, future updates should be found here: Official websiteCustom:
CyanogenMod 12.1 (WIP)
Recoveries:
TWRP Recovery (needrom.com link) - Outdated
TWRP and PhilZ recoveries
CyanogenRecovery
Tools:
Google USB Driver for ADB Debugging (Direct Download)
F5 Driver for flashing with SP Flash Tool (Extracted from official ROM) (Google Drive link)
F5 Scatter File used for flashing with SP Flash Tool (Extracted from official package) (Google Drive link)
SP Flash Tool v5.1516.00 (Google Drive link)
F5 Root Tool
For developers:
CyanogenMod Device Tree on github
Thats it for now, hope to add more links soon! Post your suggestions below, and I'll probably add them.
Click to expand...
Click to collapse
I am not able to flash the boot image. keep getting a message in sp flash tool saying i need to disable verified boot.
please help/
thank you.
Getting Started- This is a simple Tool for MotoTool for Motorola Moto Devices (Beckham, Doha, Lake, River, Evert, Sanders, Potter, Lima) - (All variants), here you will be able to Boot TWRP, flash any firmware that you want and debloat all apps too!
Prerequisites
* You must have NetFramework 4+ installed on your PC * Net Framework
* Windows 8+ 64 Bits
Install
-Start the "MotoTool_v1.4.9.9_Setup.exe"
- The installer will create a desktop shortcut and in Windows app will create a folder with the tool inside.
- When the installer ends, will ask you if you want to launch the Tool and if you want to isntall MotoDrivers. Please if you dont have MotoDrivers installed or you dont know, dont uncheck the option and let the install do it![/B]
How it works?
- The installation will create a "MotoTool" shortcut on desktop
- When you launch the Tool on the first time this will:
-- unpack on "C:\adb" fastboot&adb
-- launch a batch file: **You must accept this, because will remove unnecesary Moto Device Manager to save storage! If you don´t accept this, when you start again the Tool on next launch, will be asking you again! so i recommend you to accept it!**
-- create neccesary folders
-- generate a settings for the Tool. Be careful with this, if you clear the folders, you will lost, TWRP, Firmware, and the Tool settings!
- You must have to be enable usb debugging on your device so the Tool can work!, and IMPORTANT have Bootloader unlocked to use the options like Boot TWRP or flash any Firmware!
- Then you can use any option, remember if you want to download any file, this will check internet connection, if it´s null the tool will reset and restart the Tool!
- If you want to boot TWRP, this will be downloaded (when download finish, click again the option!) and flashed, but remember to put your device on Bootloader mode!
- Themes, the default style it´s dark, so the Tool on the first start will be by default dark, if you want to change it go to "Tool Extras" and select light screen, but be carefoul with your eyes! light Theme it´s so brightness!
Downloads and info
- Download
- Changelog
Source:
- Source-GitHub
- More Info and Help
Tool BetaVersion: v1.4.9.9
Tool Preview Version: ---
franTW said:
Getting Started
- This is a simple Tool for Motorola Moto Z3 Play, here you will be able to Boot TWRP, flash any firmware that you want and debloat all apps too!
Prerequisites
* You must have NetFramework 4+ installed on your PC * Net Framework
* Windows 8+ 64 Bits
Install
- Start the "BeckhamTool_v1.0.0.5_Setup.exe"
- The installer will create a desktop shortcut and in Windows app will create a folder with the tool inside.
- When the installer ends, will ask you if you want to launch the Tool and if you want to isntall MotoDrivers. *Please if you dont have MotoDrivers installed or you dont know, dont uncheck the option and let the install do it (WARNING: Uncheck Launch Tool!)
NOTE Setup: if you check the box "Launch BeckhamTool" the Tool will be executed, but setup wont be closed, so restart the Tool for now
How it works?
- The installation will create a "BeckhamTool" shortcut on desktop
- When you launch the Tool on the first time will unpack on "C:\adb" fastboot&adb, and will create neccesary folders and generate a settings for the Tool. Be careful with this, if you clear the folders, you will lost, TWRP, Firmware, and the Tool settings
- You must have to be enable usb debugging on your device so the Tool can work!, and have Bootloader unlocked to use the options like Boot TWRP or flash any Firmware
- Then you can use any option, remember if you want to download any file, this will check internet connection, if its null the tool will reset and restart the Tool!
- If you want to boot TWRP, this will be downloaded (when download finish, click again the option) and flashed, but remember to put your device on Bootloader mode and ready to flash
- Themes, the default style it´s dark, so the Tool on the first start will be by default dark, if you want to change it go to settings icon and change it, but be carefoul with your eyes! Light Theme its so brightness!
Preview
What is this?
This is a pre-release of the Tool, this have new options and functions than Stable don´t, but if you want to use this previews, you are on your own risk of having bugs, and maybe other accidentally errors!
Downloads and info
- Download Stable
- Download Preview
- Source-GitHub
- More Info and Help
- More screenshots
Tool Stable Version: v1.0.0.6
Tool Preview Version: v1.0.0.7-Preview 2
Click to expand...
Click to collapse
I appreciate your work. Hard for me to believe not one single response to your thread. I appreciate it and thank you for your work.
bob24260 said:
I appreciate your work. Hard for me to believe not one single response to your thread. I appreciate it and thank you for your work.
Click to expand...
Click to collapse
Thank you!
I've been missing from the Moto Z3 for 6 months now.
I think it's time to tinker with the Z3Play so I'll give the tool a try.
Even if I know nothing about TRW, custom ROMs and rooting of THIS device.
My previous experience was with LG devices. Which were pretty straight forward.
Sent from my Moto Z3 Play using Tapatalk
Everything that you can do with this app you can do with fastboot which is multiplatform.
QkiZMR said:
Everything that you can do with this app you can do with fastboot which is multiplatform.
Click to expand...
Click to collapse
Yes i know, this Tool its just to make the things easier... everyone can use whatever they want...
does anyone still have this tool i would like to try it for my z3 play
paulhauth25 said:
does anyone still have this tool i would like to try it for my z3 play
Click to expand...
Click to collapse
Click that github link in the first post.
@franTW
Thanks for this nice tool, I just took my Z3 Play out of the drawer, after a year or so.