installing TWRP with Odin, error complete(write) operation failed - Samsung Galaxy S7 Questions and Answers

I was able to successfully root my att galaxy s7 however when I try to install TWRP using Odin it gives me the error Complete(Write) operation failed. Also on my phone it says "secure check fail: recovery"
[ QUOTE]<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
[/QUOTE]

Your bootloader is locked. Chances are you can't unlock it unless you have an S7 other than the US version.

DragonFire1024 said:
Your bootloader is locked. Chances are you can't unlock it unless you have an S7 other than the US version.
Click to expand...
Click to collapse
Samsung s7 G930U is US version

Adnightmare said:
Samsung s7 G930U is US version
Click to expand...
Click to collapse
Yes. The user didn't specify the version. I have the US version and got the exact same error.

DragonFire1024 said:
Yes. The user didn't specify the version. I have the US version and got the exact same error.
Click to expand...
Click to collapse
there is any chances to have a custom recovery without root

Adnightmare said:
there is any chances to have a custom recovery without root
Click to expand...
Click to collapse
If you have the US version of the S7, there isn't a custom recovery available, even with root. You can flash zips with FlashFire, but that requires root.
Custom recoveries are not always available on rooted devices.

Related

Flashing G900F Firmware on G900P

Hi,
I got a G900P Sprint S5 With the latest firmware from it.
The problem with this is that i live in Europe where the 4G bands are different, I managed to get around it by changing the NV items..
The problem is that the phone connects to 4G but data rarely works.
The thing that i did to get it to work was installing the g900f firmware but now i can't do it because ODIN says
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This also happens when downgrading.
Thanks in advance
mprodani2003 said:
Hi,
I got a G900P Sprint S5 With the latest firmware from it.
The problem with this is that i live in Europe where the 4G bands are different, I managed to get around it by changing the NV items..
The problem is that the phone connects to 4G but data rarely works.
The thing that i did to get it to work was installing the g900f firmware but now i can't do it because ODIN says
This also happens when downgrading.
Thanks in advance
Click to expand...
Click to collapse
You cannot downgrade and you're probably going to fry the phone eventually flashing firmware that was not designed for it. I see your multiple posts and I already responded in one other thread.

Can I get a quick help with why the root isnt working for me? :D

Can anyone help me with this? I don't know why I always have an issue, using a J7, I did the following :
Open odin 3.12
put phone in DL mode
connect phone and says "added"
click AP and select the .tar file, check box is checked
click start and get this
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help this is damning how I seem to have an issue every time I try and do this....
no one?
Are you using the correct recovery file for J7?
Which recovery are you flashing ?
I suggest you flash the latest TWRP 3.0.2
https://dl.twrp.me/j7elte/twrp-3.0.2-0-j7elte.img.tar
Then it will reboot to the recovery after its done in odin and then flash supersu zip
Sent from my SM-A710F using Tapatalk
Also what actual model of the j7 are you using? That also makes a difference.
sent from this device on this app....
OriginalShinken1 said:
Also what actual model of the j7 are you using? That also makes a difference.
sent from this device on this app....
Click to expand...
Click to collapse
Samsung Galaxy J7 J700M, 16GB, Dual SIM LTE, Factory Unlocked (Black)
is the model, thanks
and yeah I will try that version of TWR thanks!
Did you enable the usb debugging in the developer option and oem unlock?
I suggest try searching it at the youtube for tutorial!
Sent from my SM-A710F using Tapatalk

Trouble flashing the T-Mobile Firmware on my MetroPCS S7

So, I know there are ways to flash different firmware on to each Galaxy S7, Metro and T-Mobile are pretty much the most similar of each version. What I'm trying to do is make it so my G S7 is stock T-Mobile so that I can update it to the Nougat Beta. I'm sort of impatient lol. Here's the errors I'm getting:
This one is in Odin and I'm using the modified version that I used originally to root my S7 which BTW is back to stock unrooted.
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone shows this in RED:
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
[1]eMMC write fail: aboot
I'm not sure what the problem is, I have my drivers installed, I have debugging checked and I'm using an HTC usb cord only because they are better with data transfers than the stock Samsung cord in my experience. I'm not sure what I'm doing wrong.
Help? :fingers-crossed:
jawshdarnit said:
So, I know there are ways to flash different firmware on to each Galaxy S7, Metro and T-Mobile are pretty much the most similar of each version. What I'm trying to do is make it so my G S7 is stock T-Mobile so that I can update it to the Nougat Beta. I'm sort of impatient lol. Here's the errors I'm getting:
This one is in Odin and I'm using the modified version that I used originally to root my S7 which BTW is back to stock unrooted.
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone shows this in RED:
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
[1]eMMC write fail: aboot
I'm not sure what the problem is, I have my drivers installed, I have debugging checked and I'm using an HTC usb cord only because they are better with data transfers than the stock Samsung cord in my experience. I'm not sure what I'm doing wrong.
Help? :fingers-crossed:
Click to expand...
Click to collapse
Use the unmodified version
Okay will do. I'll post again if any issues arise.
kitila said:
Use the unmodified version
Click to expand...
Click to collapse
Used the most up to date version and still getting same error message.
kitila said:
Use the unmodified version
Click to expand...
Click to collapse
I downloaded the zip file from sammobile and used the newest version of Odin and it worked! Thank you so much for your help sir! :good:

Lost my baseband and IMEI on my j710fn

Hey!
I decided to install the Resurrection Remix rom on my Samsung J7 2016 (SM-J710FN). But after i flashed it I noticed my IMEI and baseband had disappeared. My phone doesn't recognize my SIM card and my cellular data no longer works. I didn't have a efs backup too. I might have wiped the system partition in my twrp recovery.
If you could help me I would really appreciate it.
get odin and reflash all 4 of the latest firmware files (AP,BL,CP,CSC)
RS.85243 said:
get odin and reflash all 4 of the latest firmware files (AP,BL,CP,CSC)
Click to expand...
Click to collapse
I tried to but each time I try to flash the bootloader an error comes out.
Ratbug said:
I tried to but each time I try to flash the bootloader an error comes out.
Click to expand...
Click to collapse
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Trying to flash a rom
On the phone it says sw rev. check fail. device: 4, binary: 2
Ratbug said:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Trying to flash a rom
On the phone it says sw rev. check fail. device: 4, binary: 2
Click to expand...
Click to collapse
find the version of official firmware you had on it last, if you try to flash the boot with an older version of the firmware it will fail. Here is a link to the latest firmware for the 710fn from India https://drive.google.com/open?id=1f_C8REO2ZRwiqBegUGEnUer9DcWy9adR
if i try it this way i get an "PIT" error on my phone in ODIN MODE
Never mind. I took the phone to a Samsung shop and they fixed it.
i have the same problem and I can't find the right FW.
all i know is, that I previously had the last available OTA installed.
when trying to flash the FW given above, i get the error: secure check failed (pit)
I have the same problem now. I've tried many available firmware versions and none of them work. Is there anything I can do to make the phone usable again?

//SM-G892A\\ *AT&T G892AUCU2BRC5 Oreo ODIN*

Been away for a bit, But here is Stock Oreo that you can update or restore back to stock enjoy!
AP_G892AUCU2BRC5_CL13220380_QB17322530_REV00_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G892AUCU2BRC5_CL13220380_QB17322530_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_G892AUCU2BRC5_CP9157428_CL13220380_QB17322530_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G892AATT2BRC5_CL13220380_QB17322530_REV00_user_low_ship_MULTI_CERT.tar.md5
Here is my personal Odin that i use its patched so you shouldn't have no issues at all
https://www.androidfilehost.com/?fid=673956719939830999
Link for firmware
https://www.androidfilehost.com/?fid=674106145207485797
Great!!!
Thank you for the Odin Files
You are such a life saver! with the most recent bootloader and a failed attempt at a root, i have been stuck with a soft bricked phone for ages. For the life of me I couldnt get G950U1UES5CRF5 firmware to flash. Every version of Odin I used failed. However this version worked perfectly and now im not using the terrible samsung galaxy express 3. Thank you so much man for your version of Odin!
Thank you for the Odin file.
I'm outside the US and cannot get newer OTA update. Is there any solution to get update files? I searched around this forum but all links of OTA update zip files are unavailable
I tried here's what I got:
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 6037 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can this rom get twrp and be rooted?
Non-AT&T Simcard
Can this rom be used with a non-at&t sim? or do I have to unlock it again after flashing?
If your phone was legitimately unlocked by att it will stay unlocked under all circumstances. If you used a 3rd party, it could be trial and error. Best to contact them.
Also i uploaded a newer version in this thread.
S8 Active Oreo
https://forum.xda-developers.com/att-galaxy-s8/how-to/s8-active-oreo-t3771507/page7

Categories

Resources