Database Info

ODIN FALI!

Hello,
I'm having problem flashing the orignal firmware package for galaxy Y.
I'm using ODIN v1.85 And downloaded the (Indian) firmware packages form [URL="http://forum.xda-developers.com/showthread.php?t=1465800"[/URL]
It gives me the following messages:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
When I restart my phone it would boot into in custom ROM.
Screen shots attached...
Please help me....
Thank you.

Try flashing it again with another odin file/firmware. Did you a get a green progress bar on your phone while odin process was going on?
Use the odin i am giving here.
https://www.dropbox.com/s/tc32llywhly4nb0/Odin3-v1.85.zip
______________________________________
A HeRo can be AnyOne....© even a PO TA TOE....

Thank you very much i actually flashed another package and its done thanks for your help.:laugh::good:

Just as an added note, always make sure you do an MD5 check on anything you are about to flash in Odin.

NEED INSANE HELP! Tried ROOTING (FAILED) Went into a boot loop. Samsung Galaxy S7

Iv tried Odin with all Bl,AP,CP, and CSC Packages it keeps saying FAIL! (Auth) then a blank log then Complete(Write) operation failed.
For the Samsung smart switch the phone us supported. I have the latest verison and my phone is a Galaxy S7 (Us Cellular) Model: SM-G930R4 still says its not supported.
Im stuck idk what to do and i just want my phone working again! Thank you for the help!
Update: Phone wont enter Recovery Mode nor will start just download mode.
Update: got in to show me i need smart switch recovery. Its says my device is not supported and when i try to recovery feature my phone doesn't appear.
When I apply all BL,Ap ect. It shows
SW REC CHECK FAIL: [aboot]Fused 4 > binary 2
[1] eMMC: write Fail: aboot
When just flashing the AP with odin these are the logs
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Its stuck in on the screen telling me to use smart switch pc software
Wont start to boot or go to recovery.
Tried odin start with re-partion and these are the logs farthest i gotten with no errors popping up on my phone
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> persist.img.ext4
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1831)
<OSM> All threads completed. (succeed 0 / failed 1)

Try using the modded "Prince Cosmy Odin" with stock firmware first
If that fails, try following this
https://forum.xda-developers.com/galaxy-s7/how-to/unbrick-s7-snapdragon-trying-to-to-t3697441

*Detection* said:
Try using the modded "Prince Cosmy Odin" with stock firmware first
If that fails, try following this
https://forum.xda-developers.com/galaxy-s7/how-to/unbrick-s7-snapdragon-trying-to-to-t3697441
Click to expand...
Click to collapse
I have been using the modded one this entire time does that mean anything?

*Detection* said:
Try using the modded "Prince Cosmy Odin" with stock firmware first
If that fails, try following this
https://forum.xda-developers.com/galaxy-s7/how-to/unbrick-s7-snapdragon-trying-to-to-t3697441
Click to expand...
Click to collapse
I attempted to follow that link so i when through the steps came to step two of downloads and had to find a S7 Snapdragon Root .tar so i did and found this XDA forum https://forum.xda-developers.com/verizon-s7-edge/how-to/root-method-nougat-t3566978 which was the first thing on google searching for the snapdragon.
I followed those steps and i for the error Secure check fail : Boot
I was also able to get it to get into a boot loop once again
When i run odin with the S7_Qualcomm.tar with auto reboot re-partition f. reset time and nand earse all it fails and gives me these logs
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1831)
<OSM> All threads completed. (succeed 0 / failed 1)
When running the s7_qualcomm.tar file with only auto reboot and r.reset time I get a PASS with these logs
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But now my phone is in a boot loop with the logo of samsung S7 and the reovery booting.. is also popping up at the same time.

Enisty said:
I have been using the modded one this entire time does that mean anything?
Click to expand...
Click to collapse
Have you tried the non-modded version?
I'd have used that first
ODIN 3.12.3 or newer

*Detection* said:
Have you tried the non-modded version?
I'd have used that first
ODIN 3.12.3 or newer
Click to expand...
Click to collapse
IT WORKS!
I downloaded this file
USC-G930R4TYU4BQK3-20171221083318.zip
Wish I knew where I got it from but now my phone is actually turning on!
There was a loading screen iv never seen before thought it show
Installing applications with a black bar then smart switch popped up and the bar was filled instantly with yellow lol iv just never seen this screen before from
past uses of any Samsung device.

Good stuff, just be cautious with that model S7, it's a snapdragon meaning much more difficult to unbrick if you brick it as the bootloader is locked

*Detection* said:
Good stuff, just be cautious with that model S7, it's a snapdragon meaning much more difficult to unbrick if you brick it as the bootloader is locked
Click to expand...
Click to collapse
Its really buggy the OS itself. Its slower the normal idk if its just because of how fresh it is like the flash maybe just give it time?

Enisty said:
Its really buggy the OS itself. Its slower the normal idk if its just because of how fresh it is like the flash maybe just give it time?
Click to expand...
Click to collapse
Did you factory reset after the flash (or use CSC to force the reset)?
I'd reset it, it should be pretty smooth after maybe 5 mins of first boot

Lost my baseband and IMEI on my j710fn

Hey!
I decided to install the Resurrection Remix rom on my Samsung J7 2016 (SM-J710FN). But after i flashed it I noticed my IMEI and baseband had disappeared. My phone doesn't recognize my SIM card and my cellular data no longer works. I didn't have a efs backup too. I might have wiped the system partition in my twrp recovery.
If you could help me I would really appreciate it.

get odin and reflash all 4 of the latest firmware files (AP,BL,CP,CSC)

RS.85243 said:
get odin and reflash all 4 of the latest firmware files (AP,BL,CP,CSC)
Click to expand...
Click to collapse
I tried to but each time I try to flash the bootloader an error comes out.

Ratbug said:
I tried to but each time I try to flash the bootloader an error comes out.
Click to expand...
Click to collapse
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Trying to flash a rom
On the phone it says sw rev. check fail. device: 4, binary: 2

Ratbug said:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Trying to flash a rom
On the phone it says sw rev. check fail. device: 4, binary: 2
Click to expand...
Click to collapse
find the version of official firmware you had on it last, if you try to flash the boot with an older version of the firmware it will fail. Here is a link to the latest firmware for the 710fn from India https://drive.google.com/open?id=1f_C8REO2ZRwiqBegUGEnUer9DcWy9adR

if i try it this way i get an "PIT" error on my phone in ODIN MODE

Never mind. I took the phone to a Samsung shop and they fixed it.

i have the same problem and I can't find the right FW.
all i know is, that I previously had the last available OTA installed.
when trying to flash the FW given above, i get the error: secure check failed (pit)

I have the same problem now. I've tried many available firmware versions and none of them work. Is there anything I can do to make the phone usable again?

[Help] Downgrading problem SM-G930T from Oreo 8.0 to Marshmallow 6.0.1

Hi, I got this phone from a friend and it had Nougat 7.0 firmware installed, I got OTA Oreo update notification so I tried it. Now my battery life has reduced to half and phone lags like hell. I want to downgrade it from Oreo to Marshmallow stock.
I have tried every possible solution on this site and on the web; downloaded compatible firmware, Samsung USB drivers, Odin and tried flashing multiple times, but always got this error. (USB debugging ON, OEM unlock ON. Auto reboot and F. reset time checked)
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> lksecapp.mbn
<ID:0/005> xbl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I then tried to revert it back to Nougat 7.0, but got same error. Please any help would be appreciated as I am sick of Oreo update.
Current Bootloader Version: G930TUVS8CRJ1
Latest Firmware: G930TUVSACSG1/G930TTMBACSG1
Oreo Build Number: R16NW.G930TUVS8CRJ1

You can't downgrade USA model S7's, they're bootloader locked which prevents this action.
Even the international version can only be partially downgraded with a full bootloader unlock, and it requires using TWRP and ROM zips.
My only suggestion for your issues is doing a full Odin flash of Oreo with all 4 firmware files selected (AP, BL, CSC, CP) as the OTA's upgrade process is known to cause issues that a full fresh flash doesn't experience.

Softbrick after trying to root, can't flash firmare with Odin

So, I tried to root an s8+ SM G955F. I guess I didn't take some measures and triggered the Knox security.
I tried to make something work from safe mode and wanted to uninstall TWRP app. After that I got hit by the \only official released binaries are allowed to be flashed\ message every time i tried to boot. I can go to download mode only.
I try to flash stock firmware via Odin and it says fail. Here is the log:
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> up_param.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone help me?

Shadοw Force said:
So, I tried to root an s8+ SM G955F. I guess I didn't take some measures and triggered the Knox security.
I tried to make something work from safe mode and wanted to uninstall TWRP app. After that I got hit by the \only official released binaries are allowed to be flashed\ message every time i tried to boot. I can go to download mode only.
I try to flash stock firmware via Odin and it says fail. Here is the log:
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> up_param.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone help me?
Click to expand...
Click to collapse
Might need more information like:
Current firmware?
Firmware trying to flash?
Odin version?
Could be wrong but sounds like flashing wrong or downgraded firmware.