[FIRMWARE][MIUI STABLE][land] For Custom ROMs - Xiaomi Redmi 3s ROMs, Kernels, Recoveries, & Other

You can get latest stable firmware images for land from here. If you are facing Unknown Baseband issue or something like that, then you should flash the latest firmware. If you need any further help, just comment down below.
NOTE: READ THIS CAREFULLY BEFORE PROCEEDING​
Flash at your own risk and do some research before flashing. I'll not be responsible if anything happens to your device.
This is only for Redmi 3S/3X/Prime (land). Flashing it on other device may result in Hard Brick
Click to expand...
Click to collapse
Baseband Version (Latest):- ***NNS_PACK-1.87716.2.103688.2-V051
DOWNLOADS​GLOBAL STABLE
V9.5.5.0 (2018-05-xx)
V9.5.1.0 (2018-03-xx)
V9.2.2.0 (2018-02-xx)
V8.5.4.0 (2017-10-xx)
V8.5.3.0 (2017-05-10)
V8.1.1.0 (2016-11-23)
CHINA STABLE
V9.5.3.0 (2018-03-xx)
V9.2.2.0 (2018-02-xx)
V9.2.1.0 (2018-01-xx)
FLASHING PROCEDURE​1. Reboot to Recovery.
2. Select Install and select the firmware zip file which you've downloaded.
3. Swipe to start flashing and wait untill flashing finishes.
4. Reboot and Enjoy.
Thanks to @impulsar for suggesting.
Don't forget to hit Thanks button if you liked it.
XDA:DevDB Information
MIUI Global/China Stable Firmware, Tool/Utility for the Xiaomi Redmi 3S
Contributors
dasshubham762, impulsar, Xiaomi
Version Information
Status: Stable
Created 2017-10-01
Last Updated 2018-05-17

Congrats and thanks, a much needed thread

impulsar said:
Congrats and thanks, a much needed thread
Click to expand...
Click to collapse
Thanks to you also..

dasshubham762 said:
Thanks to you also..
Click to expand...
Click to collapse
I was tired of tagging you everywhere ?

impulsar said:
I was tired of tagging you everywhere ?
Click to expand...
Click to collapse

no need to install new rom after flashing this?
pardon for noob question like this, i never try before.
previous update i did to my phone always followed with installing new ROM.
thank you

groovepeppy said:
no need to install new rom after flashing this?
pardon for noob question like this, i never try before.
previous update i did to my phone always followed with installing new ROM.
thank you
Click to expand...
Click to collapse
You don't need to flash MIUI for firmware if you're flashing this

impulsar said:
You don't need to flash MIUI for firmware if you're flashing this
Click to expand...
Click to collapse
what i meant was that i always flash new custom nougat ROM after i flashed some firmware updates.
i did not mean flashing MIUI ROM
so, i can just flash this firmware on my AOSP based ROM, wipe cache after that and reboot?

groovepeppy said:
what i meant was that i always flash new custom nougat ROM after i flashed some firmware updates.
i did not mean flashing MIUI ROM
so, i can just flash this firmware on my AOSP based ROM, wipe cache after that and reboot?
Click to expand...
Click to collapse
Yes you can flash. No need to wipe cache and dalvik. Just reboot after finishing installation.

I have v040 baseband, do I need to upgrade?

dan.man said:
I have v040 baseband, do I need to upgrade?
Click to expand...
Click to collapse
Yes you should upgrade to the latest. But not necessary

What's the release date of this?
How to know my version?

dan.man said:
I have v040 baseband, do I need to upgrade?
Click to expand...
Click to collapse
It's not necessary but suggested to be good.

gustavolang said:
What's the release date of this?
How to know my version?
Click to expand...
Click to collapse
You can check your baseband version on Settings>About

dasshubham762 said:
Yes you can flash. No need to wipe cache and dalvik. Just reboot after finishing installation.
Click to expand...
Click to collapse
flashed and running well now
Thank's button pressed
:highfive:

dasshubham762 said:
MIUI 8.5.3.0 base firmware is the latest stable version for land as of now. If you are facing Unknown Baseband issue or something like that, then you should flash the latest firmware.
Baseband Version (Latest):- NNS_PACK-1.87716.2.103688.2-V043
DOWNLOADS
V8.1.1.0 (23.11.2016):https://drive.google.com/file/d/0B0dFC1bANOx9U2IxaUtPUTJ6S1k/view?usp=drivesdk
V8.5.3.0 (10.05.2017):https://drive.google.com/file/d/0B0dFC1bANOx9eW1WRFJFdzFpMEE/view?usp=drivesdk
FLASHING PROCEDURE
1. Reboot to Recovery.
2. Select Install and select the firmware file which you've downloaded.
3. Swipe to start flashing and wait untill flashing finishes.
4. Reboot and Enjoy.
Thanks to @impulsar for encouraging me.
Created: 17.09.2017
Last Updated: 18.09.2017
Click to expand...
Click to collapse
This version Supports QC2 in LAND Redme 3S prime

ajay1919 said:
This version Supports QC2 in LAND Redme 3S prime
Click to expand...
Click to collapse
Which version?

Added firmware images of MIUI V8.1.1.0 Global Stable
V8.1.1.0 (23.11.2016): Link in the OP
Click to expand...
Click to collapse

dasshubham762 said:
Which version?
Click to expand...
Click to collapse
MIUI 8.5.3

ajay1919 said:
MIUI 8.5.3
Click to expand...
Click to collapse
Yes. You are right

Related

[ROM][MIUI][7.0] [mido] miui.su

I was running into many problems running a custom miui rom, so I started finding more custom stable firmwares.
I have been running miui.su rom and it has been a pleasure. No Google services force closes and its very stable. I am sharing the link for you guys to try as well. It's based on China beta rom with all the bloat removed. Inbuilt OTA updater works.
*I take no credit for the creation of this rom, just sharing it so you guys can try and profit.
https://miui.su/firmware_manager/model_view/374/
Please give this post a thumbs up if you like the rom.
Lastly another more customized ROM. People were asking for it so I am adding link here. Its miuiPro. Completely different project.
http://miuipro.ru/rommgr/device_view/483
By the way it's for snapdragon variant aka mido
yankies77 said:
By the way it's for snapdragon variant aka mido
Click to expand...
Click to collapse
+ Super su inbuilt
+ Advanced reboot menu prebuilt
- doesn't allow third party themes, couldn't apply multirom icons
Haven't tested battery life as such
Screenshots. Swipe up search works
Will report on battery life after a few days use. By the way fingerprint unlock is instant. No delay what so ever.
What are the features?. Built in ota works for stable rom also?
Btw, what does su stands for? Thanks!
No spanish language, very bad
devilhunter47 said:
What are the features?. Built in ota works for stable rom also?
Click to expand...
Click to collapse
It is a beta rom but its pretty stable for daily use. The updater app works and you can get weekly rom update from there directly on to your phone.
sachin n said:
Btw, what does su stands for? Thanks!
Click to expand...
Click to collapse
Su stands for superuser aka root.
LawBC said:
No spanish language, very bad
Click to expand...
Click to collapse
Its a russian project. Sorry about that. I hope they add it in future releases.
How will we update if we have twrp recovery,I think ota update is not compatible with twrp recovery,we need to flash manually just like flashing custom rom right?
yankies77 said:
Screenshots. Swipe up search works
Click to expand...
Click to collapse
Which theme's status bar is it?
john kb said:
How will we update if we have twrp recovery,I think ota update is not compatible with twrp recovery,we need to flash manually just like flashing custom rom right?
Click to expand...
Click to collapse
Thats correct but you download the rom update through updater so you dont have to go to their website.
vishal1404 said:
Which theme's status bar is it?
Click to expand...
Click to collapse
The theme's name is Me Jilat
How do you install the ROM? By recovery or fastboot?
Please am new xD
Sup guys? I am new to xiaomi.. My device is normal redmi note 4 does it work with mine? I dont have not4 x as shown in screenshots and my baseband is different..
How to install it??
Thanks in advance.
How to disable fp authentication vibration. The intensity is very strong. Didn't have this problem in other miui versions
Isley_ said:
How do you install the ROM? By recovery or fastboot?
Click to expand...
Click to collapse
Twrp Recovery.
Wipe data, cache and dalvik cache.
Install and restart phone
tornido067 said:
Sup guys? I am new to xiaomi.. My device is normal redmi note 4 does it work with mine? I dont have not4 x as shown in screenshots and my baseband is different..
How to install it??
Thanks in advance.
Click to expand...
Click to collapse
Please share an about screen. If it is a snapdragon variant of note 4 then it will work. If it has the mtk deca core cpu this would not work. Dont worry about baseband.

How to update from cyanogen os 12.0 yng1tas17l to the latest

how do i update from cyanogen os 12.0 yng1tas17l to the latest one ?
i had given the phone for battery repair and there turned out to be a software issue as well and when i got it back it had this software installed, so now i want to sell it off so looking to update it to the latest before selling it or keeping it as a standby phone
rrohanjs said:
how do i update from cyanogen os 12.0 yng1tas17l to the latest one ?
i had given the phone for battery repair and there turned out to be a software issue as well and when i got it back it had this software installed, so now i want to sell it off so looking to update it to the latest before selling it or keeping it as a standby phone
Click to expand...
Click to collapse
Flash the latest firmware and flash lineage os.
Mr.Ak said:
Flash the latest firmware and flash lineage os.
Click to expand...
Click to collapse
It's not rooted, so just flash it in the stock recovery?
rrohanjs said:
It's not rooted, so just flash it in the stock recovery?
Click to expand...
Click to collapse
Of course not!
You always need an unlocked bootloader and Twrp while flashing zips,this ain't nexus my frand.
Mr.Ak said:
Of course not!
You always need an unlocked bootloader and Twrp while flashing zips,this ain't nexus my frand.
Click to expand...
Click to collapse
So how do i update this now?
Everyone who was on this software had to root to update further?
rrohanjs said:
So how do i update this now?
Everyone who was on this software had to root to update further?
Click to expand...
Click to collapse
No,but you won't get OTA's as cyanogen server shut down months ago!
So you must have to flash lineage os (in order to make the device not obsolete and he'll(buyer) get updates too and you just have to show him how to proceed with updates on TWRP and that if any issue arises,he should contact you))and then sell it,although,I didn't liked the idea of selling such a beauty like Oneplus One.
Edit- Proceed with this thread in case you're lost,
https://forum.xda-developers.com/showthread.php?t=2788632
Mr.Ak said:
No,but you won't get OTA's as cyanogen server shut down months ago!
So you must have to flash lineage os (in order to make the device not obsolete and he'll(buyer) get updates too and you just have to show him how to proceed with updates on TWRP and that if any issue arises,he should contact you))and then sell it,although,I didn't liked the idea of selling such a beauty like Oneplus One.
Click to expand...
Click to collapse
Lol i do love this phone i have 2 of them at home lol, well im selling it because i need a phone with nano sim card as my standby phone so removing this
Will try to sell it as is or root it if the seller wants it
I'm getting 6.5 for it on olx, good enough?
rrohanjs said:
Lol i do love this phone i have 2 of them at home lol, well im selling it because i need a phone with nano sim card as my standby phone so removing this
Will try to sell it as is or root it if the seller wants it
I'm getting 6.5 for it on olx, good enough?
Click to expand...
Click to collapse
Yes, considering the fact that there is redmi 4 available at 7k,very good enough.
Although,to make buyer more protective,you should sell your device with Nougat on it.
It doesn't take much time to unlock bootloader,flash twrp and flash any OTA supported nougat ROM,see my updated post above,I linked you a thread.
Mr.Ak said:
Yes, considering the fact that there is redmi 4 available at 7k,very good enough.
Although,to make buyer more protective,you should sell your device with Nougat on it.
It doesn't take much time to unlock bootloader,flash twrp and flash any OTA supported nougat ROM,see my updated post above,I linked you a thread.
Click to expand...
Click to collapse
Cool thanks I'll find time and do it
rrohanjs said:
Cool thanks I'll find time and do it
Click to expand...
Click to collapse
Lol,I'm your co-pilot.
Mr.Ak said:
Lol,I'm your co-pilot.
Click to expand...
Click to collapse
Lol
Mr.Ak said:
Flash the latest firmware and flash lineage os.
Click to expand...
Click to collapse
Sorry bro i'm going to bother you a bit
So i rooted it and it's on cyanogen os 12 5.0.2 now, so now i can't flash a nougat rom directly right ?
How would i know which firmware to flash, damn it's been ages flashing stuff on oneplus one
or can i just flash a cm13 snapshot and then flash a nougat rom ?
rrohanjs said:
or can i just flash a cm13 snapshot and then flash a nougat rom ?
Click to expand...
Click to collapse
That's much better.
Mr.Ak said:
That's much better.
Click to expand...
Click to collapse
so i could flash the rom but gapps failed, using open gapps stock package, got an error saying
insufficient storage space available in system partition. you may want to use a smaller open gapps package or consider removing some apps using gapps-config
trying with nano package now
rrohanjs said:
trying with nano package now
Click to expand...
Click to collapse
No need to flash Gapps now,we are just flashing cm13 snapshot to be on proper firmware.Then while flashing Nougat rom you can flash Gapps(opengapps.org -arm-7.1.x-pico/nano).
Mr.Ak said:
No need to flash Gapps now,we are just flashing cm13 snapshot to be on proper firmware.Then while flashing Nougat rom you can flash Gapps(opengapps.org -arm-7.1.x-pico/nano).
Click to expand...
Click to collapse
yea i meant with nougat rom only, not with snapshot
rrohanjs said:
yea i meant with nougat rom only, not with snapshot
Click to expand...
Click to collapse
Did it worked?
Mr.Ak said:
Did it worked?
Click to expand...
Click to collapse
Yes just rebooted all good, thanks a lot bro

MIUI 11 beta firmware only

dev didn't upload the latest fw from miui 11,so i extract the fw from miui 11 if anyone wants to try it here is the link
fw_whyred_miui_HMNote5_9.9.24_32c933f9e7_9.0.zip https://drive.google.com/file/d/1L0qwWsqIr1w03d7tz7e0WJJSA9WISRcy/view?usp=drivesdk
fw_whyred_miui_HMNote5_9.10.10_9053beb596_9.0.zip
https://drive.google.com/file/d/1-I2uD2v0fwFgWl5X7pouVVThaXpESLLr/view?usp=drivesdk
fw_whyred_miui_HMNote5_9.10.14_3833851186_9.0.zip
https://drive.google.com/file/d/1-HQyv1NFsNaT_AArllf5jbjwg2bTK1bi/view?usp=drivesdk
fw_whyred_miui_HMNote5_9.10.15_42ff9138a2_9.0.zip
https://drive.google.com/file/d/11UN5eWFQ1swSTUrtmcE2Yi_g8GDSRUwD/view?usp=drivesdk
fw_whyred_miui_HMNote5_9.10.16_eb65371946_9.0.zip
https://drive.google.com/file/d/11VxvJCfrBeiXhtnZcKTnWOC_fwO-c8R7/view?usp=drivesdk
anyone need latest fw from miui 11?
If you extract it already how come you did not test it???
MadK9 said:
If you extract it already how come you did not test it???
Click to expand...
Click to collapse
i always flash the latest fw sometimes it improves battery life.there is a miui 11 release another update.
K. How to flash this version? I'm on stock whyred 10.3.1.0 Pie global.
MadK9 said:
K. How to flash this version? I'm on stock whyred 10.3.1.0 Pie global.
Click to expand...
Click to collapse
if you're on miui then you don't have to flash it. almost every custom rom need pie fw so only they have to flash pie fw
Do you mean I can do this from recovery menu of the phone like a normal update?
MadK9 said:
Do you mean I can do this from recovery menu of the phone like a normal update?
Click to expand...
Click to collapse
it's not the rom just firmware...but you can flash it through recovery
You say I have to restart the phone in recovery mode and not from settings menu, about phone?
MadK9 said:
You say I have to restart the phone in recovery mode and not from settings menu, about phone?
Click to expand...
Click to collapse
if you don't have a bootloader unlocked phone and custom recovery you can't flash anything
SyeedAhmed said:
dev didn't upload the latest fw from miui 11,so i extract the fw from miui 11 if anyone wants to try it here is the link
fw_whyred_miui_HMNote5_9.9.24_32c933f9e7_9.0.zip https://drive.google.com/file/d/1L0qwWsqIr1w03d7tz7e0WJJSA9WISRcy/view?usp=drivesdk
fw_whyred_miui_HMNote5_9.10.10_9053beb596_9.0.zip
https://drive.google.com/file/d/1-I2uD2v0fwFgWl5X7pouVVThaXpESLLr/view?usp=drivesdk
Click to expand...
Click to collapse
Thank you, it works fine, btw is the process for making firmware from miui 11 the same as miui 10 or it needs some changes?
sushuguru said:
Thank you, it works fine, btw is the process for making firmware from miui 11 the same as miui 10 or it needs some changes?
Click to expand...
Click to collapse
same as miui 10
dev started uploading the beta fw so this is my last update thanks everyone

[ROM][CAF][UNOFFICIAL] PixelDust-CAF [RAPHAEL]

A CAF based, still in development ROM for K20/Mi9T Pro
1. ROM sources: https://github.com/pixeldust-project-caf
2. Vendor & device tree from here: https://github.com/raphael-development
3. Kernel: https://github.com/penglezos/kernel_xiaomi_raphael
Installation as usual:
1. Wipe cache and data
2. Flash ROM (I also flash dm-verity at this point)
3. Reboot to system...then, reboot back to twrp.
4. Flash opengapps & magisk.
5. Reboot to system again.
Downloads here: https://androidfilehost.com/?w=files&flid=314058
AOSP edition here: https://androidfilehost.com/?w=files&flid=314848
cool, new rom! any screenshots and features list?
Kursem said:
cool, new rom! any screenshots and features list?
Click to expand...
Click to collapse
Some screenshots added
A link to reset your password has been sent to your email address. You should receive it shortly if you haven't already. To reset the password, follow the instructions in the email.
NhaTran said:
A link to reset your password has been sent to your email address. You should receive it shortly if you haven't already. To reset the password, follow the instructions in the email.
Click to expand...
Click to collapse
Is the link ok now?
quake73 said:
Is the link ok now?
Click to expand...
Click to collapse
its ok
quake73 said:
Is the link ok now?
Click to expand...
Click to collapse
Double tap to check aod present? And fod is los fod or mi9?
Is wifi calling and fingerprint in AOD working? Ehich FOD are you using MI9 or LOS Fod? Great to see new roms.
Sent from my Mi 9T Pro using Tapatalk
Is microg supported?
New build: https://androidfilehost.com/?fid=8889791610682887369
For dirty flashing, I noticed that if you have gapps installed then you must also flash them after flashing the new build of the rom. Otherwise it gets stuck at boot animation.
quake73 said:
New build: https://androidfilehost.com/?fid=8889791610682887369
For dirty flashing, I noticed that if you have gapps installed then you must also flash them after flashing the new build of the rom. Otherwise it gets stuck at boot animation.
Click to expand...
Click to collapse
Hi Dev,
Thanks for update, is FP is working on latest build it was not working on earlier one.
pushpendrayadav said:
Hi Dev,
Thanks for update, is FP is working on latest build it was not working on earlier one.
Click to expand...
Click to collapse
Here is proof, took it a minute ago on latest build
quake73 said:
Here is proof, took it a minute ago on latest build
Click to expand...
Click to collapse
Thanks for reply ?.
quake73 said:
New build: https://androidfilehost.com/?fid=8889791610682887369
For dirty flashing, I noticed that if you have gapps installed then you must also flash them after flashing the new build of the rom. Otherwise it gets stuck at boot animation.
Click to expand...
Click to collapse
That's with every rom since flashing overrides system
IoIam said:
That's with every rom since flashing overrides system
Click to expand...
Click to collapse
Yes but other ROMs at least boot, at first I thought it's some issue with the ROM itself.
quake73 said:
Yes but other ROMs at least boot, at first I thought it's some issue with the ROM itself.
Click to expand...
Click to collapse
Wait does this work without gapps if clean flashed?
quake73 said:
Here is proof, took it a minute ago on latest build
Click to expand...
Click to collapse
Hi Dec,
FP don't detecting .Kindly help.
I am on latest Indian 12.0.1.0 FW.
pushpendrayadav said:
Hi Dec,
FP don't detecting .Kindly help.
I am on latest Indian 12.0.1.0 FW.
Click to expand...
Click to collapse
Try restarting the phone, it has happened to me, too with some other roms. I don't know, I tried it on my own global M9T pro, with global 12.0.1.0 and it worked.
quake73 said:
Try restarting the phone, it has happened to me, too with some other roms. I don't know, I tried it on my own global M9T pro, with global 12.0.1.0 and it worked.
Click to expand...
Click to collapse
Sorry not working,my bad luck. May be issue with Indian vendor.
IoIam said:
Wait does this work without gapps if clean flashed?
Click to expand...
Click to collapse
Yup, it does

[kernel][7.1.1](refined nougat note 8 rom(helios v3.1)

I am not responsible to any damage to your phone
As you know guys refined test build is note 8 ROM is leaked In anan news teller he said it is free to link on XDA so I thought to share it with you
Download link
Drive:https://drive.google.com/drive/mobile/folders/1-6W5FJ2rFphKeqvb2RP0ITl8F2QO6oc2?usp=sharing
Thanks to
@ananjaser1211
Kernel version : 3.1
FOR Android version :7.1.1
MADE BY ANANJASER1211
HAVE A NICE DAY
Anans exynos 5433 telegram group:Anan's Exynos5433 NewsLetter
The official news channel for the galaxy note 4 Nougat project and future Elite Roms.
News Channel link : https://goo.gl/c836TF
tyhjhgv said:
I am not responsible to any damage to your phone
As you know guys refined test build is note 8 ROM is leaked In anan news teller he said it is free to link on XDA so I thought to share it with you
Download link
Drive:https://drive.google.com/drive/mobile/folders/1-6W5FJ2rFphKeqvb2RP0ITl8F2QO6oc2?usp=sharing
Thanks to
@ananjaser1211
Kernel version : 3.1
FOR Android version :7.1.1
MADE BY ANANJASER1211
HAVE A NICE DAY
Click to expand...
Click to collapse
uh.. i guess im first comment here
but can i dirty flash from Rnfe 6.0? or it isnt possible and just clean install?
Shirokunz said:
uh.. i guess im first comment here
but can i dirty flash from Rnfe 6.0? or it isnt possible and just clean install?
Click to expand...
Click to collapse
Clean install, dirty flash is no good.
Cuanhog said:
Clean install, dirty flash is no good.
Click to expand...
Click to collapse
I'm not familiar with this action. Do you mind pointing me to steps for clean installing this for good practice?
I will post results after, whether positive or negative since I am probably once of the earlier adopters/guinea pigs on this.
Thanks again.
Cuanhog said:
Clean install, dirty flash is no good.
Click to expand...
Click to collapse
No you can dirty flash it
Transpopen said:
I'm not familiar with this action. Do you mind pointing me to steps for clean installing this for good practice?
I will post results after, whether positive or negative since I am probably once of the earlier adopters/guinea pigs on this.
Thanks again.
Click to expand...
Click to collapse
1.reboot to recovery
2. Flash the kernel
3.reboot and done
Shirokunz said:
uh.. i guess im first comment here
but can i dirty flash from Rnfe 6.0? or it isnt possible and just clean install?
Click to expand...
Click to collapse
This not for refined noughat note 7 it for the leaked ROM in anans telegram group
tyhjhgv said:
This not for refined noughat note 7 it for the leaked ROM in anans telegram group
Click to expand...
Click to collapse
i guess i must wait till i was able to save my data,since i was lazy to reinstall everything again xD
tyhjhgv said:
This not for refined noughat note 7 it for the leaked ROM in anans telegram group
Click to expand...
Click to collapse
I am not getting it. Can I actually flash this over stock rom? Or do I have to install a customer rom that specifically works with this kernel?
Shirokunz said:
i guess i must wait till i was able to save my data,since i was lazy to reinstall everything again xD
Click to expand...
Click to collapse
My apologies, I presumed you wanted to flash the new ROM, but in any case a Nandroid backup is recommended before you flash anything.
Cuanhog said:
My apologies, I presumed you wanted to flash the new ROM, but in any case a Nandroid backup is recommended before you flash anything.
Click to expand...
Click to collapse
I am prepared to flash a new rom and where do I get the new rom?
Has it been tested for N910U and working?
Transpopen said:
I am prepared to flash a new rom and where do I get the new rom?
Has it been tested for N910U and working?
Click to expand...
Click to collapse
The best thing to do is read through the forum/thread. I have N910H, so you will have to check out your model
https://forum.xda-developers.com/note-4/development/rom-refined-nougat-n7fe-port-alpha-1-t3804371
The N8 version is towards the end of the thread. Good luck.
Should I flash 3.0 first?
1. Rom
2. Kernel 3.0
3. Kernel 3.1
Or
1. Rom
2. Kernel 3.1
Which one?
Alafosra said:
Should I flash 3.0 first?
1. Rom
2. Kernel 3.0
3. Kernel 3.1
Or
1. Rom
2. Kernel 3.1
Which one?
Click to expand...
Click to collapse
The ROM has its own kernel, so flash ROM, then kernel 3.1
Getting error message
How to fix error message "the process com.android.phone has stopped"?
Device: N910S
Same here.
heartaone said:
How to fix error message "the process com.android.phone has stopped"?
Device: N910S
Click to expand...
Click to collapse
I did not have this problem until I flashed the Kernel V3.1.
I just dirty flashed 7.1.1 over the top and cleared cache and davlic cache.
No problem since.
N916K
wardyd said:
I did not have this problem until I flashed the Kernel V3.1.
I just dirty flashed 7.1.1 over the top and cleared cache and davlic cache.
No problem since.
N916K
Click to expand...
Click to collapse
Still same problem in my N910S. I've reflash ROM, reflash kernel, dirty flash ROM. System stopped always appear everytime
Bluetooth
heartaone said:
Still same problem in my N910S. I've reflash ROM, reflash kernel, dirty flash ROM. System stopped always appear everytime
Click to expand...
Click to collapse
I now have a problem with "bluetooth keeps stopping".
heartaone said:
How to fix error message "the process com.android.phone has stopped"?
Device: N910S
Click to expand...
Click to collapse
Wipe phone app data, sim app data if possible, reboot device.
Sent from my chiron using XDA Labs
heartaone said:
Still same problem in my N910S. I've reflash ROM, reflash kernel, dirty flash ROM. System stopped always appear everytime
Click to expand...
Click to collapse
Back on [ROM][7.0][TW][Exynos][Stable]Refined Nougat N7FE Port 6.0
No problems.
Will try 7.1.1 IF @ananjaser1211 has time to look into these problems.
I understand if he doesn't.
More than happy with what he has done on N7FE !!!

Categories

Resources