A CAF based, still in development ROM for K20/Mi9T Pro
1. ROM sources: https://github.com/pixeldust-project-caf
2. Vendor & device tree from here: https://github.com/raphael-development
3. Kernel: https://github.com/penglezos/kernel_xiaomi_raphael
Installation as usual:
1. Wipe cache and data
2. Flash ROM (I also flash dm-verity at this point)
3. Reboot to system...then, reboot back to twrp.
4. Flash opengapps & magisk.
5. Reboot to system again.
Downloads here: https://androidfilehost.com/?w=files&flid=314058
AOSP edition here: https://androidfilehost.com/?w=files&flid=314848
cool, new rom! any screenshots and features list?
Kursem said:
cool, new rom! any screenshots and features list?
Click to expand...
Click to collapse
Some screenshots added
A link to reset your password has been sent to your email address. You should receive it shortly if you haven't already. To reset the password, follow the instructions in the email.
NhaTran said:
A link to reset your password has been sent to your email address. You should receive it shortly if you haven't already. To reset the password, follow the instructions in the email.
Click to expand...
Click to collapse
Is the link ok now?
quake73 said:
Is the link ok now?
Click to expand...
Click to collapse
its ok
quake73 said:
Is the link ok now?
Click to expand...
Click to collapse
Double tap to check aod present? And fod is los fod or mi9?
Is wifi calling and fingerprint in AOD working? Ehich FOD are you using MI9 or LOS Fod? Great to see new roms.
Sent from my Mi 9T Pro using Tapatalk
Is microg supported?
New build: https://androidfilehost.com/?fid=8889791610682887369
For dirty flashing, I noticed that if you have gapps installed then you must also flash them after flashing the new build of the rom. Otherwise it gets stuck at boot animation.
quake73 said:
New build: https://androidfilehost.com/?fid=8889791610682887369
For dirty flashing, I noticed that if you have gapps installed then you must also flash them after flashing the new build of the rom. Otherwise it gets stuck at boot animation.
Click to expand...
Click to collapse
Hi Dev,
Thanks for update, is FP is working on latest build it was not working on earlier one.
pushpendrayadav said:
Hi Dev,
Thanks for update, is FP is working on latest build it was not working on earlier one.
Click to expand...
Click to collapse
Here is proof, took it a minute ago on latest build
quake73 said:
Here is proof, took it a minute ago on latest build
Click to expand...
Click to collapse
Thanks for reply ?.
quake73 said:
New build: https://androidfilehost.com/?fid=8889791610682887369
For dirty flashing, I noticed that if you have gapps installed then you must also flash them after flashing the new build of the rom. Otherwise it gets stuck at boot animation.
Click to expand...
Click to collapse
That's with every rom since flashing overrides system
IoIam said:
That's with every rom since flashing overrides system
Click to expand...
Click to collapse
Yes but other ROMs at least boot, at first I thought it's some issue with the ROM itself.
quake73 said:
Yes but other ROMs at least boot, at first I thought it's some issue with the ROM itself.
Click to expand...
Click to collapse
Wait does this work without gapps if clean flashed?
quake73 said:
Here is proof, took it a minute ago on latest build
Click to expand...
Click to collapse
Hi Dec,
FP don't detecting .Kindly help.
I am on latest Indian 12.0.1.0 FW.
pushpendrayadav said:
Hi Dec,
FP don't detecting .Kindly help.
I am on latest Indian 12.0.1.0 FW.
Click to expand...
Click to collapse
Try restarting the phone, it has happened to me, too with some other roms. I don't know, I tried it on my own global M9T pro, with global 12.0.1.0 and it worked.
quake73 said:
Try restarting the phone, it has happened to me, too with some other roms. I don't know, I tried it on my own global M9T pro, with global 12.0.1.0 and it worked.
Click to expand...
Click to collapse
Sorry not working,my bad luck. May be issue with Indian vendor.
IoIam said:
Wait does this work without gapps if clean flashed?
Click to expand...
Click to collapse
Yup, it does
Related
I am running CM13 snapshot build on my Sparkle V Sprout4.
I am unable to play Youtube Videos through YouTube app and even OGyoutube. It constantly shows
"There was a problem while playing"
"Tap to retry"
I installed Android system Webview From Playstore and It worked for sometime.
thereafter the same persistent issue
Please help.
Coojlazz said:
I am running CM13 snapshot build on my Sparkle V Sprout4.
I am unable to play Youtube Videos through YouTube app and even OGyoutube. It constantly shows
"There was a problem while playing"
"Tap to retry"
I installed Android system Webview From Playstore and It worked for sometime.
thereafter the same persistent issue
Please help.
Click to expand...
Click to collapse
@sachin n can you help on this?
Coojlazz said:
@sachin n can you help on this?
Click to expand...
Click to collapse
Wait, Imma ask this to one of greatest patcher.
Update - @Coojlazz it's here - - YouTube fix for cm13 nightly , thanks to @bulook00 for the patch.
Flash zip via recovery.
sachin n said:
Wait, Imma ask this to one of greatest patcher.
Update - @Coojlazz it's here - - YouTube fix for cm13 nightly , thanks to @bulook00 for the patch.
Flash zip via recovery.
Click to expand...
Click to collapse
will this work on snapshot as it is mentioned for nightly?
Coojlazz said:
will this work on snapshot as it is mentioned for nightly?
Click to expand...
Click to collapse
Oops, works with nightly only.
sachin n said:
Oops, works nightly only.
Click to expand...
Click to collapse
So what I should do now? Only those two bugs i.e hotspot and youtube are annoying.
Coojlazz said:
So what I should do now? Only those two bugs i.e hotspot and youtube are annoying.
Click to expand...
Click to collapse
Eh, sorry for the late reply, anyway, try other Roms, like RR/DU/etc.. And yeah, check shreesha's AFH, there was a recent build of AOSiP avail, thats a great rom with a buncha customizations, give a try.
sachin n said:
Eh, sorry for the late reply, anyway, try other Roms, like RR/DU/etc.. And yeah, check shreesha's AFH, there was a recent build of AOSiP avail, thats a great rom with a buncha customizations, give a try.
Click to expand...
Click to collapse
I think Enabling NuPlayer in Development settings works But that option is missing in my settings.
I am waiting for official CM14.1 build so would like to stay on CM13 only for now
Is there any stable nougat rom for Sprout as the alpha build was useless on my Sparkle V
Coojlazz said:
I think Enabling NuPlayer in Development settings works But that option is missing in my settings.
I am waiting for official CM14.1 build so would like to stay on CM13 only for now
Is there any stable nougat rom for Sprout as the alpha build was useless on my Sparkle V
Click to expand...
Click to collapse
Yes, there is a another Nougat build available, unfortunately it has same bugs as cm14 alpha 1, but RIL patch and WiFi patch makes it even better than cm14 alpha 1, if you wanna try I'll Link it.
sachin n said:
Yes, there is a another Nougat build available, unfortunately it has same bugs as cm14 alpha 1, but RIL patch and WiFi patch makes it even better than cm14 alpha 1, if you wanna try I'll Link it.
Click to expand...
Click to collapse
Sure please share links for rom, patch and working g-apps.
thanks for all help
Coojlazz said:
Sure please share links for rom, patch and working g-apps.
thanks for all help
Click to expand...
Click to collapse
I'll do, but one thing if you've an fb account, then just join a group named android one Development and discussion.
That's where all devs release test builds etc... Dooo it naaaw!
sachin n said:
I'll do, but one thing if you've an fb account, then just join a group named android one Development and discussion.
That's where all devs release test builds etc... Dooo it naaaw!
Click to expand...
Click to collapse
Ok Sure
But at least share those links.
Coojlazz said:
Ok Sure
But at least share those links.
Click to expand...
Click to collapse
Rom link - https://www.androidfilehost.com/?fid=457095661767120630
RIL patch - http://www.mediafire.com/file/o2ev61bnvayt2wy/mtk_ril_patch_aosp_mm.zip
Sorry, I gave you misinformation earlier, that said WiFi patch isn't working.
Gapps - Pico 7.1 [Don't have link, Google it]
Note that, you need to edit updater script, inside Rom's zip, change Sprout4 to sprout, save it archive zip once again, then flash rom, ril patch, followed by gapps, at last reboot!
sachin n said:
Rom link - https://www.androidfilehost.com/?fid=457095661767120630
RIL patch - http://www.mediafire.com/file/o2ev61bnvayt2wy/mtk_ril_patch_aosp_mm.zip
Sorry, I gave you misinformation earlier, that said WiFi patch isn't working.
Gapps - Pico 7.1 [Don't have link, Google it]
Note that, you need to edit updater script, inside Rom's zip, change Sprout4 to sprout, save it archive zip once again, then flash rom, ril patch, followed by gapps, at last reboot!
Click to expand...
Click to collapse
Is it a Rom or OTA to previous build?
and G-apps for 7.0 or 7.1?
Coojlazz said:
Is it a Rom or OTA to previous build?
and G-apps for 7.0 or 7.1?
Click to expand...
Click to collapse
That's a full Rom, clean flash recommended.
That's not the ota, again... No dirty flash, just clean flash it.
Rom is of 7.1, so you need Pico gapps 7.1* Goodluck m8!
sachin n said:
That's a full Rom, clean flash recommended.
That's not the ota, again... No dirty flash, just clean flash it.
Rom is of 7.1, so you need Pico gapps 7.1* Goodluck m8!
Click to expand...
Click to collapse
Thanks a lot
Coojlazz said:
Thanks a lot
Click to expand...
Click to collapse
Welcome.
@Coojlazz wait... Wait! Damn, there is another build avail, and yeah that's mostly bug free. Everything is working so far, that's dirty Unicorns-11, wanna link?
Link - Dirty Unicorns, based On N test build .
Thanks to shreesha!
sachin n said:
Welcome.
@Coojlazz wait... Wait! Damn, there is another build avail, and yeah that's mostly bug free. Everything is working so far, that's dirty Unicorns-11, wanna link?
Link - Dirty Unicorns, based On N test build .
Thanks to shreesha!
Click to expand...
Click to collapse
Procedure to flash?
Normal with 7.0 G-apps Right?
Coojlazz said:
Procedure to flash?
Normal with 7.0 G-apps Right?
Click to expand...
Click to collapse
Same I guess, but I see no one mentioned what gapps. So, you should try only rom.. And it seems Rom's shipped with inbuilt gapps, cuz the size says 300 mb.
Clean flash that's it. Only rom no ril patch either.
Btw, that's your choice you can try either SAOSP or DU11.
It's up to you!!
sachin n said:
Same I guess, but I see no one mentioned what gapps. So, you should try only rom.. And it seems Rom's shipped with inbuilt gapps, cuz the size says 300 mb.
Clean flash that's it. Only rom no ril patch either.
Btw, that's your choice you can try either SAOSP or DU11.
It's up to you!!
Click to expand...
Click to collapse
I would try both and will soon share my Experience
I would try DU with minimal 55mb gapps 7.0
Thanks
I was running into many problems running a custom miui rom, so I started finding more custom stable firmwares.
I have been running miui.su rom and it has been a pleasure. No Google services force closes and its very stable. I am sharing the link for you guys to try as well. It's based on China beta rom with all the bloat removed. Inbuilt OTA updater works.
*I take no credit for the creation of this rom, just sharing it so you guys can try and profit.
https://miui.su/firmware_manager/model_view/374/
Please give this post a thumbs up if you like the rom.
Lastly another more customized ROM. People were asking for it so I am adding link here. Its miuiPro. Completely different project.
http://miuipro.ru/rommgr/device_view/483
By the way it's for snapdragon variant aka mido
yankies77 said:
By the way it's for snapdragon variant aka mido
Click to expand...
Click to collapse
+ Super su inbuilt
+ Advanced reboot menu prebuilt
- doesn't allow third party themes, couldn't apply multirom icons
Haven't tested battery life as such
Screenshots. Swipe up search works
Will report on battery life after a few days use. By the way fingerprint unlock is instant. No delay what so ever.
What are the features?. Built in ota works for stable rom also?
Btw, what does su stands for? Thanks!
No spanish language, very bad
devilhunter47 said:
What are the features?. Built in ota works for stable rom also?
Click to expand...
Click to collapse
It is a beta rom but its pretty stable for daily use. The updater app works and you can get weekly rom update from there directly on to your phone.
sachin n said:
Btw, what does su stands for? Thanks!
Click to expand...
Click to collapse
Su stands for superuser aka root.
LawBC said:
No spanish language, very bad
Click to expand...
Click to collapse
Its a russian project. Sorry about that. I hope they add it in future releases.
How will we update if we have twrp recovery,I think ota update is not compatible with twrp recovery,we need to flash manually just like flashing custom rom right?
yankies77 said:
Screenshots. Swipe up search works
Click to expand...
Click to collapse
Which theme's status bar is it?
john kb said:
How will we update if we have twrp recovery,I think ota update is not compatible with twrp recovery,we need to flash manually just like flashing custom rom right?
Click to expand...
Click to collapse
Thats correct but you download the rom update through updater so you dont have to go to their website.
vishal1404 said:
Which theme's status bar is it?
Click to expand...
Click to collapse
The theme's name is Me Jilat
How do you install the ROM? By recovery or fastboot?
Please am new xD
Sup guys? I am new to xiaomi.. My device is normal redmi note 4 does it work with mine? I dont have not4 x as shown in screenshots and my baseband is different..
How to install it??
Thanks in advance.
How to disable fp authentication vibration. The intensity is very strong. Didn't have this problem in other miui versions
Isley_ said:
How do you install the ROM? By recovery or fastboot?
Click to expand...
Click to collapse
Twrp Recovery.
Wipe data, cache and dalvik cache.
Install and restart phone
tornido067 said:
Sup guys? I am new to xiaomi.. My device is normal redmi note 4 does it work with mine? I dont have not4 x as shown in screenshots and my baseband is different..
How to install it??
Thanks in advance.
Click to expand...
Click to collapse
Please share an about screen. If it is a snapdragon variant of note 4 then it will work. If it has the mtk deca core cpu this would not work. Dont worry about baseband.
You can get latest stable firmware images for land from here. If you are facing Unknown Baseband issue or something like that, then you should flash the latest firmware. If you need any further help, just comment down below.
NOTE: READ THIS CAREFULLY BEFORE PROCEEDING
Flash at your own risk and do some research before flashing. I'll not be responsible if anything happens to your device.
This is only for Redmi 3S/3X/Prime (land). Flashing it on other device may result in Hard Brick
Click to expand...
Click to collapse
Baseband Version (Latest):- ***NNS_PACK-1.87716.2.103688.2-V051
DOWNLOADSGLOBAL STABLE
V9.5.5.0 (2018-05-xx)
V9.5.1.0 (2018-03-xx)
V9.2.2.0 (2018-02-xx)
V8.5.4.0 (2017-10-xx)
V8.5.3.0 (2017-05-10)
V8.1.1.0 (2016-11-23)
CHINA STABLE
V9.5.3.0 (2018-03-xx)
V9.2.2.0 (2018-02-xx)
V9.2.1.0 (2018-01-xx)
FLASHING PROCEDURE1. Reboot to Recovery.
2. Select Install and select the firmware zip file which you've downloaded.
3. Swipe to start flashing and wait untill flashing finishes.
4. Reboot and Enjoy.
Thanks to @impulsar for suggesting.
Don't forget to hit Thanks button if you liked it.
XDA:DevDB Information
MIUI Global/China Stable Firmware, Tool/Utility for the Xiaomi Redmi 3S
Contributors
dasshubham762, impulsar, Xiaomi
Version Information
Status: Stable
Created 2017-10-01
Last Updated 2018-05-17
Congrats and thanks, a much needed thread
impulsar said:
Congrats and thanks, a much needed thread
Click to expand...
Click to collapse
Thanks to you also..
dasshubham762 said:
Thanks to you also..
Click to expand...
Click to collapse
I was tired of tagging you everywhere ?
impulsar said:
I was tired of tagging you everywhere ?
Click to expand...
Click to collapse
no need to install new rom after flashing this?
pardon for noob question like this, i never try before.
previous update i did to my phone always followed with installing new ROM.
thank you
groovepeppy said:
no need to install new rom after flashing this?
pardon for noob question like this, i never try before.
previous update i did to my phone always followed with installing new ROM.
thank you
Click to expand...
Click to collapse
You don't need to flash MIUI for firmware if you're flashing this
impulsar said:
You don't need to flash MIUI for firmware if you're flashing this
Click to expand...
Click to collapse
what i meant was that i always flash new custom nougat ROM after i flashed some firmware updates.
i did not mean flashing MIUI ROM
so, i can just flash this firmware on my AOSP based ROM, wipe cache after that and reboot?
groovepeppy said:
what i meant was that i always flash new custom nougat ROM after i flashed some firmware updates.
i did not mean flashing MIUI ROM
so, i can just flash this firmware on my AOSP based ROM, wipe cache after that and reboot?
Click to expand...
Click to collapse
Yes you can flash. No need to wipe cache and dalvik. Just reboot after finishing installation.
I have v040 baseband, do I need to upgrade?
dan.man said:
I have v040 baseband, do I need to upgrade?
Click to expand...
Click to collapse
Yes you should upgrade to the latest. But not necessary
What's the release date of this?
How to know my version?
dan.man said:
I have v040 baseband, do I need to upgrade?
Click to expand...
Click to collapse
It's not necessary but suggested to be good.
gustavolang said:
What's the release date of this?
How to know my version?
Click to expand...
Click to collapse
You can check your baseband version on Settings>About
dasshubham762 said:
Yes you can flash. No need to wipe cache and dalvik. Just reboot after finishing installation.
Click to expand...
Click to collapse
flashed and running well now
Thank's button pressed
:highfive:
dasshubham762 said:
MIUI 8.5.3.0 base firmware is the latest stable version for land as of now. If you are facing Unknown Baseband issue or something like that, then you should flash the latest firmware.
Baseband Version (Latest):- NNS_PACK-1.87716.2.103688.2-V043
DOWNLOADS
V8.1.1.0 (23.11.2016):https://drive.google.com/file/d/0B0dFC1bANOx9U2IxaUtPUTJ6S1k/view?usp=drivesdk
V8.5.3.0 (10.05.2017):https://drive.google.com/file/d/0B0dFC1bANOx9eW1WRFJFdzFpMEE/view?usp=drivesdk
FLASHING PROCEDURE
1. Reboot to Recovery.
2. Select Install and select the firmware file which you've downloaded.
3. Swipe to start flashing and wait untill flashing finishes.
4. Reboot and Enjoy.
Thanks to @impulsar for encouraging me.
Created: 17.09.2017
Last Updated: 18.09.2017
Click to expand...
Click to collapse
This version Supports QC2 in LAND Redme 3S prime
ajay1919 said:
This version Supports QC2 in LAND Redme 3S prime
Click to expand...
Click to collapse
Which version?
Added firmware images of MIUI V8.1.1.0 Global Stable
V8.1.1.0 (23.11.2016): Link in the OP
Click to expand...
Click to collapse
dasshubham762 said:
Which version?
Click to expand...
Click to collapse
MIUI 8.5.3
ajay1919 said:
MIUI 8.5.3
Click to expand...
Click to collapse
Yes. You are right
I am not responsible to any damage to your phone
As you know guys refined test build is note 8 ROM is leaked In anan news teller he said it is free to link on XDA so I thought to share it with you
Download link
Drive:https://drive.google.com/drive/mobile/folders/1-6W5FJ2rFphKeqvb2RP0ITl8F2QO6oc2?usp=sharing
Thanks to
@ananjaser1211
Kernel version : 3.1
FOR Android version :7.1.1
MADE BY ANANJASER1211
HAVE A NICE DAY
Anans exynos 5433 telegram group:Anan's Exynos5433 NewsLetter
The official news channel for the galaxy note 4 Nougat project and future Elite Roms.
News Channel link : https://goo.gl/c836TF
tyhjhgv said:
I am not responsible to any damage to your phone
As you know guys refined test build is note 8 ROM is leaked In anan news teller he said it is free to link on XDA so I thought to share it with you
Download link
Drive:https://drive.google.com/drive/mobile/folders/1-6W5FJ2rFphKeqvb2RP0ITl8F2QO6oc2?usp=sharing
Thanks to
@ananjaser1211
Kernel version : 3.1
FOR Android version :7.1.1
MADE BY ANANJASER1211
HAVE A NICE DAY
Click to expand...
Click to collapse
uh.. i guess im first comment here
but can i dirty flash from Rnfe 6.0? or it isnt possible and just clean install?
Shirokunz said:
uh.. i guess im first comment here
but can i dirty flash from Rnfe 6.0? or it isnt possible and just clean install?
Click to expand...
Click to collapse
Clean install, dirty flash is no good.
Cuanhog said:
Clean install, dirty flash is no good.
Click to expand...
Click to collapse
I'm not familiar with this action. Do you mind pointing me to steps for clean installing this for good practice?
I will post results after, whether positive or negative since I am probably once of the earlier adopters/guinea pigs on this.
Thanks again.
Cuanhog said:
Clean install, dirty flash is no good.
Click to expand...
Click to collapse
No you can dirty flash it
Transpopen said:
I'm not familiar with this action. Do you mind pointing me to steps for clean installing this for good practice?
I will post results after, whether positive or negative since I am probably once of the earlier adopters/guinea pigs on this.
Thanks again.
Click to expand...
Click to collapse
1.reboot to recovery
2. Flash the kernel
3.reboot and done
Shirokunz said:
uh.. i guess im first comment here
but can i dirty flash from Rnfe 6.0? or it isnt possible and just clean install?
Click to expand...
Click to collapse
This not for refined noughat note 7 it for the leaked ROM in anans telegram group
tyhjhgv said:
This not for refined noughat note 7 it for the leaked ROM in anans telegram group
Click to expand...
Click to collapse
i guess i must wait till i was able to save my data,since i was lazy to reinstall everything again xD
tyhjhgv said:
This not for refined noughat note 7 it for the leaked ROM in anans telegram group
Click to expand...
Click to collapse
I am not getting it. Can I actually flash this over stock rom? Or do I have to install a customer rom that specifically works with this kernel?
Shirokunz said:
i guess i must wait till i was able to save my data,since i was lazy to reinstall everything again xD
Click to expand...
Click to collapse
My apologies, I presumed you wanted to flash the new ROM, but in any case a Nandroid backup is recommended before you flash anything.
Cuanhog said:
My apologies, I presumed you wanted to flash the new ROM, but in any case a Nandroid backup is recommended before you flash anything.
Click to expand...
Click to collapse
I am prepared to flash a new rom and where do I get the new rom?
Has it been tested for N910U and working?
Transpopen said:
I am prepared to flash a new rom and where do I get the new rom?
Has it been tested for N910U and working?
Click to expand...
Click to collapse
The best thing to do is read through the forum/thread. I have N910H, so you will have to check out your model
https://forum.xda-developers.com/note-4/development/rom-refined-nougat-n7fe-port-alpha-1-t3804371
The N8 version is towards the end of the thread. Good luck.
Should I flash 3.0 first?
1. Rom
2. Kernel 3.0
3. Kernel 3.1
Or
1. Rom
2. Kernel 3.1
Which one?
Alafosra said:
Should I flash 3.0 first?
1. Rom
2. Kernel 3.0
3. Kernel 3.1
Or
1. Rom
2. Kernel 3.1
Which one?
Click to expand...
Click to collapse
The ROM has its own kernel, so flash ROM, then kernel 3.1
Getting error message
How to fix error message "the process com.android.phone has stopped"?
Device: N910S
Same here.
heartaone said:
How to fix error message "the process com.android.phone has stopped"?
Device: N910S
Click to expand...
Click to collapse
I did not have this problem until I flashed the Kernel V3.1.
I just dirty flashed 7.1.1 over the top and cleared cache and davlic cache.
No problem since.
N916K
wardyd said:
I did not have this problem until I flashed the Kernel V3.1.
I just dirty flashed 7.1.1 over the top and cleared cache and davlic cache.
No problem since.
N916K
Click to expand...
Click to collapse
Still same problem in my N910S. I've reflash ROM, reflash kernel, dirty flash ROM. System stopped always appear everytime
Bluetooth
heartaone said:
Still same problem in my N910S. I've reflash ROM, reflash kernel, dirty flash ROM. System stopped always appear everytime
Click to expand...
Click to collapse
I now have a problem with "bluetooth keeps stopping".
heartaone said:
How to fix error message "the process com.android.phone has stopped"?
Device: N910S
Click to expand...
Click to collapse
Wipe phone app data, sim app data if possible, reboot device.
Sent from my chiron using XDA Labs
heartaone said:
Still same problem in my N910S. I've reflash ROM, reflash kernel, dirty flash ROM. System stopped always appear everytime
Click to expand...
Click to collapse
Back on [ROM][7.0][TW][Exynos][Stable]Refined Nougat N7FE Port 6.0
No problems.
Will try 7.1.1 IF @ananjaser1211 has time to look into these problems.
I understand if he doesn't.
More than happy with what he has done on N7FE !!!
DON'T INSTALL THIS, IT'S BROKEN AT THIS MOMENT AND I DON'T FEEL LIKE FIXING IT RIGHT NOW (try to debloat stock rom yourself, its fun)
A debloated version of original MIUI firmware. Made by me. This is for the NFC model (angelican), it might work on the non NFC version but i don't guarantee it., ill make the non NFC rom too.
It's based on V12.0.11.0.QCSEUXM Global EEA. There are no Google Apps there, only phone and messages.
INSTRUCTIONS
- Reboot to recovery
- Wipe data, cache, dalvik cache (no need to if you already used MIUI)
- Flash ZIP
- Reboot
DOWNLOAD
https://mega.nz/file/JpwHHYyD#nKYdM0sP5MaK6cWERpn4dR8tqaHcD76KYMSqPn6C16I
Dont worry if the setup crashes. Just reboot the phone. This is caused because of no google services.
BUGS
So there should not be any, since this is a little bit modified stock rom, but if i screwed something up feel free to report.
This ROM is using a slighlty modified kernel with AVB, DM-Verify and Forceencrypt OFF. It was customized by me.
Here is the link to the original firmware: https://xiaomifirmwareupdater.com/miui/angelican/stable/V12.0.11.0.QCSEUXM/ (prebuilt kernel from here)
Nice work dude. Do I need a custom recovery to flash it?
lteixeiramnc said:
Nice work dude. Do I need a custom recovery to flash it?
Click to expand...
Click to collapse
Yes. I recomend you orangefox recovery
gapps ?
w33ha66 said:
gapps?
Click to expand...
Click to collapse
I deleted them. You should be able to flash them but i did not test that. I recomend pico package
Can I install in Redmi 9C global?
Could you upload the rom on Google Drive?
lteixeiramnc said:
Could you upload the rom on Google Drive?
Click to expand...
Click to collapse
Not today. And why?
Hii please tell me can I install my Redmi 9c not nfc
Saadiiii said:
Hii please tell me can I install my Redmi 9c not nfc
Click to expand...
Click to collapse
It should work. The rom is for the nfc version but you csn try
Gabiblocks said:
Not today. And why?
Click to expand...
Click to collapse
There's a limit for download on mega.nz.
I get this error on installing from orangefox recovery: Could not extract 'META-INF/com/google/android/update-binary'.
lteixeiramnc said:
I get this error on installing from orangefox recovery: Could not extract 'META-INF/com/google/android/update-binary'.
Click to expand...
Click to collapse
Try sideload and make sure MIUI support/OTA is on in the recovery settings.
Hello, what is the use of your rom? Ok, she's deflated, but what? Can you describe the changes made? Compared to the current version, is your rom smoother and faster?
Fromfr said:
Hello, what is the use of your rom? Ok, she's deflated, but what? Can you describe the changes made? Compared to the current version, is your rom smoother and faster?
Click to expand...
Click to collapse
Yes it is smoother and faster. I deleted bloatware and google apps and services
Hi, im getting the same error from orangefox recovery: Could not extract 'META-INF/com/google/android/update-binary'.
Ive tried enabling OTA and to sideload
Redmi 9c global non nfc
LineageOS rom installs without a problem.
I would love to test this rom as the LineageOS GoCam is not good
Jannie0077 said:
Hi, im getting the same error from orangefox recovery: Could not extract 'META-INF/com/google/android/update-binary'.
Ive tried enabling OTA and to sideload
Redmi 9c global non nfc
Click to expand...
Click to collapse
Thats proabably cuz you have non nfc. I dont guarantee it works on it.
Ok, thank you. Could you please release a Non-NFC rom?
Jannie0077 said:
Ok, thank you. Could you please release a Non-NFC rom?
Click to expand...
Click to collapse
I will, when i get out of the hospital