Related
i just flash the I9000JH1 to the phone ,i still havent install the kernel to the phone yet and it had boot the home page. and i follow the instruction to reflash again. with Odin3 after i will flashing the CSC and PDA file i unplug and restart the phone and i goes to android system recovery <2e> and i try to reboot but the power button not working....it said
sasung recovery utils
-for BML-
reboot system now
apply sdcard: update.zip
wipe data/factory reset
wipe cache partition
but i can use vol up and down to scroll up and down, but can select the item, the power button is not working.
down there had some yellow words
update media, please wait ...
update media, finished
#menu mode#
- Appling Multi-CSC...
installing Multi-CSC
that the only word it wrote, so wht can i do, is there had any method to reflash the thing??cuz the computer also cant recognize the phone, Thanks
hi ron
im just a noob but i have the same problem yesterday =)
u must flash an kaptivate kernel for a workung power button in the recovery menu!
http://forum.xda-developers.com/showthread.php?t=782413
but i cant even boot up the phone, it stuck in the recovery mode
ron671 said:
but i cant even boot up the phone, it stuck in the recovery mode
Click to expand...
Click to collapse
You need to pull the battery, put it back, and try one of the button combinations to get it into download mode on next boot. Your easiest route is either both volume buttons, and plug in USB without pressing power (which works on the Captivate), or hold just volume down and plug in USB (which is the right combination for an i9000). With one of these the phone should automatically power into the download mode. Get Odin one click ready to flash stock before you put the phone into download mode and hit start when it recognizes the device. If that won't work. try the other key combinations keeping in mind that they change when you flash an i9000 image, so you should try all Captivate combinations, and all i9000 combinations. Since the Captivate lacks a physical home button, anything that involves that will not work, which is the reason why you are stuck in recovery. The i9000 recovery is expecting you to press the home button to select (unlike the power on the stock Captivate).
also, ADB commands should work while the phone is in recovery mode
Same Problem
The Key combination Vol +, Vol - and the power button power cycles the phone whether or not the phone is in recovery mode or off. I am having the same problem, and there are no key combinations that worked for me. For now, I am permanently stuck in recovery mode. I could use some help here, as I have tried everything.
Oh, for the I9000 ROM installed on the captivate, adb commands do not work. While the phone is in recovery mode, you cannot connect to the PC.
I have found though, that by booting into the recovery menu, plugging in your USB cord and then taking out/putting in the battery will put into an unknown upload mode which does connect it to the computer, but not in a way that allows Odin or adb to run. There might be a way to flash/work with the phone, but I don't know how. Any help would be appreciate, as it is not in disk mode.
rajendra82 said:
You need to pull the battery, put it back, and try one of the button combinations to get it into download mode on next boot. Your easiest route is either both volume buttons, and plug in USB without pressing power (which works on the Captivate), or hold just volume down and plug in USB (which is the right combination for an i9000). With one of these the phone should automatically power into the download mode. Get Odin one click ready to flash stock before you put the phone into download mode and hit start when it recognizes the device. If that won't work. try the other key combinations keeping in mind that they change when you flash an i9000 image, so you should try all Captivate combinations, and all i9000 combinations. Since the Captivate lacks a physical home button, anything that involves that will not work, which is the reason why you are stuck in recovery. The i9000 recovery is expecting you to press the home button to select (unlike the power on the stock Captivate).
Click to expand...
Click to collapse
madetoservehim said:
The Key combination Vol +, Vol - and the power button power cycles the phone whether or not the phone is in recovery mode or off. I am having the same problem, and there are no key combinations that worked for me. For now, I am permanently stuck in recovery mode. I could use some help here, as I have tried everything.
Oh, for the I9000 ROM installed on the captivate, adb commands do not work. While the phone is in recovery mode, you cannot connect to the PC.
I have found though, that by booting into the recovery menu, plugging in your USB cord and then taking out/putting in the battery will put into an unknown upload mode which does connect it to the computer, but not in a way that allows Odin or adb to run. There might be a way to flash/work with the phone, but I don't know how. Any help would be appreciate, as it is not in disk mode.
Click to expand...
Click to collapse
1. Take out battery and put it back in
2a Hold Vol Up+Vol Down (Do not press power)
or
2b Hold Vol Down (Do not press power)
3. Plug in USB cable connected to computer (Still do not press power)
If the phone behaves like a Captivate, after using 2a and 3, you should be in download mode. If the phone behaves like an i9000, after 2b and 3, you should be in Download mode.
Response & Update
Have tried both of these options. Either way you do it, the phone still goes back into recovery mode. There was talk about using a custom kernel that would allow you to use the power button as the select button. Is there any way to use adb in recovery mode, so you can install the modified kernel, or reboot to download mode? If not, I started a thread on this question that can be found here as well:
rajendra82 said:
1. Take out battery and put it back in
2a Hold Vol Up+Vol Down (Do not press power)
or
2b Hold Vol Down (Do not press power)
3. Plug in USB cable connected to computer (Still do not press power)
If the phone behaves like a Captivate, after using 2a and 3, you should be in download mode. If the phone behaves like an i9000, after 2b and 3, you should be in Download mode.
Click to expand...
Click to collapse
Did you ever fix this? I'm stuck in recovery mode now and none of the button combinations work
I have the exact same problem. Have you had any luck figuring out how to get the phone to reboot?
really people??
can you not follow step by step instructions?
http://forum.xda-developers.com/showthread.php?t=734871
Pirateghost said:
really people??
can you not follow step by step instructions?
http://forum.xda-developers.com/showthread.php?t=734871
Click to expand...
Click to collapse
I am sure they can.
The 2e and 3e Download and Recovery modes were disabled by Samsung in later models of the SGS. It is not possible to get there using a combination of buttons etc.,
How to install the Download/Recovery Mode fix (3 Button Disabled SPL fix) http://forum.xda-developers.com/showthread.php?t=785201
There may be another method using an AnyWay JIG cable: which is a MicroB USB to Standard USB connector where I think one crosses pin 3 and 4 with a 301kOhm resister 1% tolerance, 1/4Watt. It would be best to search this forum for precise instructions.
Win for a dumb f%^k
well this isnt a good answer but i have a phone that went as discribed, no respose to three button, and unable to flash or get off the system reset screen on start up work on it for about 6 hour then left it when i came back i turned it on plug in the usb and CMD'ed adb reboot download and what did you know this time it worked? reset from that screen and it return to normal sooo.... um good luck and there is a way out just not shore what exactly it is
good for some
okey after fidling around i found my phone responded to adb ie download adb open a cmd line and typing adb reboot download. from there i just cycled the power hold down the power button a while and it rebooted to normal working order. though i still cant get 3 button even with flashing the fix so no hacking for me hope this helps
I'm using the Samsung Fascinate, i500 and i got stuck on the same screen too!!! i just double tapped the home button and rebooted the phone
I was able to get out of a 2e loop by running adb reboot download with odin open, then reflashed from there. Went through the same process twice since cognition 2.3b8 does not want to install on my phone. had no problem with b7 install.
Instructions were not that great. But Thanks -I figured it out and am back up.
Same problem here, cant make my phone go to download mode, ok or select key "power button" not working.
already tried the 2 methods before and they not working, (combination of keys)
Vibrant stuck in android system recovery 2e
I know this is not exact help but i just accidentally found myself into download mode after more key combo fiddling. I believe the last combo that got me in was either holding UP + POWER or just UP at the precise moment the screen goes black to reboot. This is after quite a few boot cycles so trial and error seemed to pull it off.
I'd test it again to be more sure but i don't want to risk being stuck again at this point. But I figured i'd speak up now, because i don't plan to have 2e there ever again.
Guys need serious technical help..............................
i have rooted my phone with super one click all things were going fine.installed rom manager to backup my stock ROM and committed a mistake and installed wrong cwm and tried to backup my stock rom.selecting the backup option it Suppose reboot my phone in download mode which doesn't happen. and now i dose not have any access to my phone.
I searched whole forum and haven't found any solution.please help me.
Need guidance..
download and install pratyush.creed rom using odin and ur phone will be fine again
Bricked Screen (A.K.A. phone-!-pc or Black Screen of Death)
To recover from this problem, you'll need to get into the Download Mode.
Black Screen of Death:A fully bricked phone will not boot, or display the charging logo when connected to a USB charger. This presently cannot be recovered from any recovery attempt, it will require the phone to be sent back to Samsung and be serviced.
This screen does not always mean your phone is bricked. If you have a hardware locked vibrant, maybe, however, if your phone is not hardware locked, unplug the USB cable from the phone, Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
If this does not work, open odin. Then connect your usb cable to your phone and computer. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes (flashes) release the Power Button. It should get into download mode.
Additionally it is possible to get into the Download Mode using a kind of micro-usb connector, modified with a 301k resistor as showed in this video:
http://www.youtube.com/watch?v=GjDkShT-65Y
Source:http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series
The solution in green will work for you
Thanks,
Spike
Press the Thanks button if this helped
raj3534 said:
download and install pratyush.creed rom using odin and ur phone will be fine again
Click to expand...
Click to collapse
Like i said my phone doesn't boot in downlode menu.odin will not find my port.
any other suggestion....................please
spike1902 said:
Bricked Screen (A.K.A. phone-!-pc or Black Screen of Death)
To recover from this problem, you'll need to get into the Download Mode.
Black Screen of Death:A fully bricked phone will not boot, or display the charging logo when connected to a USB charger. This presently cannot be recovered from any recovery attempt, it will require the phone to be sent back to Samsung and be serviced.
This screen does not always mean your phone is bricked. If you have a hardware locked vibrant, maybe, however, if your phone is not hardware locked, unplug the USB cable from the phone, Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
If this does not work, open odin. Then connect your usb cable to your phone and computer. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes (flashes) release the Power Button. It should get into download mode.
Additionally it is possible to get into the Download Mode using a kind of micro-usb connector, modified with a 301k resistor as showed in this video:
http://www.youtube.com/watch?v=GjDkShT-65Y
Source:http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series
The solution in green will work for you
Thanks,
Spike
Press the Thanks button if this helped
Click to expand...
Click to collapse
i have gone though this thread.................this wont help in my case.but thanx for reply
And my S5670 is Death
I have one problem. The phone do not want to enter in download mode or recovery, and the screen is always black and don't vibrating.
I was flashing it and somewhere it block and after that it do not start.
I connected to PC and when i press:
- Home + Power don't enter in recovery mode and the PC don't see it.
- Volume Down + Home + Power don't enter in download mode and PC don't see it
- Volume Up + Home + Power the Odin and PC was saw it and installed the driver for USB, modem and serial. But when i trying to install the ROM it block at "setting connection"
I will try and with the modified resistor but when i will be home.
If you are any suggestion or another software or u want to try something i am in the mood to try all. I buy the phone for testing
If i find something else i will post.
antsmaster said:
I have one problem. The phone do not want to enter in download mode or recovery, and the screen is always black and don't vibrating.
I was flashing it and somewhere it block and after that it do not start.
I connected to PC and when i press:
- Home + Power don't enter in recovery mode and the PC don't see it.
- Volume Down + Home + Power don't enter in download mode and PC don't see it
- Volume Up + Home + Power the Odin and PC was saw it and installed the driver for USB, modem and serial. But when i trying to install the ROM it block at "setting connection"
I will try and with the modified resistor but when i will be home.
If you are any suggestion or another software or u want to try something i am in the mood to try all. I buy the phone for testing
If i find something else i will post.
Click to expand...
Click to collapse
I am facing the same problem when i press
- Volume Up + Home + Power the Odin and PC was saw it and installed the driver for USB, modem and serial. But when i trying to install the ROM it block at "setting connection"
Do i Need to goto customer care...............is it the final option....................
I talked to someone and he said to pres hold 3 buttons Vol Down + Home + power then insert battery and after that should appear the Download mode. I'm not have the phone whit me but i will try at home. if u succeed that and bring to life your phone let me know
i already tried that,it dosen't seems to work.
Just flash it again via odin with any firm or rom n ur phone will be fine....
just flash it properly....
thats it..
rajrocks said:
Just flash it again via odin with any firm or rom n ur phone will be fine....
just flash it properly....
thats it..
Click to expand...
Click to collapse
i think u have not gone through all the above posts......................i made this clear that my phone is not booting in download menu
vol down+home+power <----this combo keys are not working.
Anyways thank u for reply.............
stuck on flashing.........................
when i pressed vol up+home+power,the port was found by odin but it dose not start flashing
I try and schema whit modified resistor but nothing. i measured the level of battery it was at 2,4 V after some seconds it down to 0. Maybe it the battery? i charge all the night and next day i put on USB on PC all the day before it die. Maybe i broke the battery and no phone?
antsmaster said:
I try and schema whit modified resistor but nothing. i measured the level of battery it was at 2,4 V after some seconds it down to 0. Maybe it the battery? i charge all the night and next day i put on USB on PC all the day before it die. Maybe i broke the battery and no phone?
Click to expand...
Click to collapse
i dont think battery is problem in my case.i have checked my handset by replacing battery to.
Now i think service center is the last option.i'll visit there latest by tommorow.
If you send it to the service, please after they send back to you the phone, post what they do to the phone (change motherboard or change another piece or just flash it) Thanks.
antsmaster said:
If you send it to the service, please after they send back to you the phone, post what they do to the phone (change motherboard or change another piece or just flash it) Thanks.
Click to expand...
Click to collapse
i changed my decision and visited service center today instead of tomorrow. when i handovered handset to them they inspected the handset i front of me. they disassembled handset gone through it.finally they told me that "we will try to resolve your problem with software, and the problem is not resolved then they will change(replace) the board.
lets see what they will do.i'll inform u what they did to my handset..............................
I think u need to go to customer care. (even i bricked my phone once...) but never ever accept that uve rooted ur phone... Thats wat i did... and i got my phone repaired without any further issues!
Sent from my GT-S5670 using XDA App
hi every one.......i saw this post now...........i too faced this problem.......its a hardware problem.....i took my mobile to service center they changed the mother board.......a preadvice never ever try anything with rom manager.....its the main culprit......
used rom manager without any problem with my previous phone.......didn't face any problem......but i didn't know that CMD is currently not working with fit.........
Hey guys,
I tried to install TW4 but that didnt worked for me.
Now i only have a black sreen when the phone starts.
And i cant get Odin to work because i cant connect the phone to the pc with usb.. i only can get in boot mode.
Anyone know a soluction to my problem?
Can you get to Download mode...home+volumedown+power button combination??
Is that the same way as going into boot mode?
instead pushing vol.up button i need to push vol.down button?
Edit:
Yes i can get in download mode
DarkRaver84 said:
Is that the same way as going into boot mode?
instead pushing vol.up button i need to push vol.down button?
Edit:
Yes i can get in download mode
Click to expand...
Click to collapse
so if you can enter download mode there is no problem, just install new rom ...
when i try to install a new rom with odin it gives me a massege "connect a telephone" but it is connected through usb..
i got the ops file in odin and by "one package" i put the md5 file.
But then i get that massege "connect a telephone"
Try an other USB-port, make sure Kies is not running and use Odin 4.43.
i dont have kies on the computer and i use odin 4.43.
i tried another usb port but no changes..
DarkRaver84 said:
i dont have kies on the computer and i use odin 4.43.
Click to expand...
Click to collapse
But Kies includes drivers for the phone - so do you have properly installed drivers for your phone?
OT: Is there a chance to take back given "Thanks"? I accidentally pressed "thanks" instead of "quote"
reneph said:
But Kies includes drivers for the phone - so do you have properly installed drivers for your phone?
OT: Is there a chance to take back given "Thanks"? I accidentally pressed "thanks" instead of "quote"
Click to expand...
Click to collapse
Yes i have the standerd samsung mobile driver installed and it worked before i installed tw4 witch diddnt worked for me.
DarkRaver84 said:
Yes i have the standerd samsung mobile driver installed and it worked before
Click to expand...
Click to collapse
Yeah but such a problem seems to occur relative often.
I would try to reinstall drivers, maybe with the Kies-drivers or use another computer.
I have similar problem. There is the same symptoms.
I have try:
- other usb ports
- other drivers (original samsung / kies drivers)
- other pc
- kill kies processes
- misc roms
and.. nothing..
I cant get recovery mode.. There is ramdump mode instead of recovery :/
Actually my i9001 is bricked and I cant load any rom..
Maybe my sgs is locked by bootloader or something?
if ure entering ramdump mode then u dont have the correct combination of buttons down when booting up:
Vol + / Power = Recovery Mode
Vol + / Home / Power = Ramdump Mode
Vol - / Home / Power = Download Mode
cheers
jbmc83 said:
if ure entering ramdump mode then u dont have the correct combination of buttons down when booting up:
Vol + / Power = Recovery Mode
Vol + / Home / Power = Ramdump Mode
Vol - / Home / Power = Download Mode
cheers
Click to expand...
Click to collapse
At least your guide on how to get to recovery is a big fail. That works with I9000, not I9001. Vol + / Power, WHEN the samsung text appears, release both buttons. AND when the lights in the softkeys turn on, quickly tap MENU, that's how to boot to recovery mode
well sorry if i left that part out, i assumed he would know how to navigate the recovery mode once he actually got the button combo right. and the only fail here is ur rude attitude, deff. no need for that around here imho.
aside from that, all these instructions are correct.
cheers
Sent from my GT-I9001 using XDA App
I solved the problem.
Unfortunately not on my PC. My i9001 needed a box which I solved all mistakes.
Now I have Gingerbread with root
Unfortunately I still hav a problem with my PC which doesn't want connect with sgs.. :/
I will try trial and error method.
Ok so my fiancé pointed out that her phone got an update and I liked how it looked so I wanted to update mine. but I couldn't because of root. and so since I never use my root I went into super su and hit the unroot button and then my phone reset I have been in bootloop ever since. before someone suggests NO I cannot use ODIN because it wont register my phone being plugged in. YES I have the proper driver installed I triple checked and no my computer does not register the phone either. is there anything that I can do?
You didnt kill your phone!!!
The reason of bootloop is that when you press unroot in superSU it also restores unpatched stock boot.img which doesn't boot with custom recovery.
Hold power + home + volume up + volume down for 7 seconds to hard reboot your phone and enter download mode confirmation page. Press volume down to exit downloading mode and immediately hold volume up + power + home until you enter recovery. Do a factory reset.
Enter download mode confirmation page again by same method and press volume up, connect phone to your PC. Now if Odin doesn't recognize your phone then that 100% Driver or USB Cable problem. Flash latest official firmware and you should be good to go.
Aria.A97 said:
You didnt kill your phone!!!
The reason of bootloop is that when you press unroot in superSU it also restores unpatched stock boot.img which doesn't boot with custom recovery.
Hold power + home + volume up + volume down for 7 seconds to hard reboot your phone and enter download mode confirmation page. Press volume down to exit downloading mode and immediately hold volume up + power + home until you enter recovery. Do a factory reset.
Enter download mode confirmation page again by same method and press volume up, connect phone to your PC. Now if Odin doesn't recognize your phone then that 100% Driver or USB Cable problem. Flash latest official firmware and you should be good to go.
Click to expand...
Click to collapse
Nice tut! Anyway, if he still can't get recognized by PC, i suggest to try different PC, i had the same problem a while ago, my pc wouldn't recognize my phone in odin no matter what. Then i checked on my friends PC and it worked like a charm. It must be USB ports problems.
if your pc does see your phone but the odin still fails you can just use smartswitch and do emergency recovery tyoe your model number and imei in and sit back and relax and you are done
Thank YOU!!!!!!
Aria.A97 said:
You didnt kill your phone!!!
The reason of bootloop is that when you press unroot in superSU it also restores unpatched stock boot.img which doesn't boot with custom recovery.
Hold power + home + volume up + volume down for 7 seconds to hard reboot your phone and enter download mode confirmation page. Press volume down to exit downloading mode and immediately hold volume up + power + home until you enter recovery. Do a factory reset.
Enter download mode confirmation page again by same method and press volume up, connect phone to your PC. Now if Odin doesn't recognize your phone then that 100% Driver or USB Cable problem. Flash latest official firmware and you should be good to go.
Click to expand...
Click to collapse
You are a genius It was my cable that I was using... I was sitting here reading your post and I'm thinking to my self "yeah like I haven't tried that already thanks for nothing." then I saw the part about my cable and said its worth a shot. thank you so much I was so scared and frustrated about possible being without a phone... Thank you again
Xeodia said:
You are a genius It was my cable that I was using... I was sitting here reading your post and I'm thinking to my self "yeah like I haven't tried that already thanks for nothing." then I saw the part about my cable and said its worth a shot. thank you so much I was so scared and frustrated about possible being without a phone... Thank you again
Click to expand...
Click to collapse
Hey guys since my s6 SM-G920F is with tripped knox status 0x1 i can't use smartswitch for emergency recovery it stucks on 94% always with hours,what is the main reason of that i tried on other pc it is the same,my cable is ok because it charges s6 without any singl problem!sorry for interuppt in this thread like idiot but what is about smartswitch stucks always on 94%?!!!
anyone help me:crying:
vlatkonexus4 said:
Hey guys since my s6 SM-G920F is with tripped knox status 0x1 i can't use smartswitch for emergency recovery it stucks on 94% always with hours,what is the main reason of that i tried on other pc it is the same,my cable is ok because it charges s6 without any singl problem!sorry for interuppt in this thread like idiot but what is about smartswitch stucks always on 94%?!!!
anyone help me:crying:
Click to expand...
Click to collapse
just use odin to flash firmware.
vlatkonexus4 said:
Hey guys since my s6 SM-G920F is with tripped knox status 0x1 i can't use smartswitch for emergency recovery it stucks on 94% always with hours,what is the main reason of that i tried on other pc it is the same,my cable is ok because it charges s6 without any singl problem!sorry for interuppt in this thread like idiot but what is about smartswitch stucks always on 94%?!!!
anyone help me:crying:
Click to expand...
Click to collapse
Nonsense.... I used it when I trashed my EFS / Modem
Smart Switch does work, check your USB drivers and internet connection.
At the end of the process smart switch does verify a lot of thing, when your CPU from your computer is slow it will hang a long time on 94%
i can try via teamviewer to help you
Hello,
I have a problem, today I install the combination file to my SM-J410F Samsung device but it not work I get %80 and failed and write something (like custom binary fused ) but after that I want to download another Stock firmware but I noticed that it cannot into download mode and when I Press Vol up + power it only show the Samsung logo and turn off, I try many times but it's something.....
I also use jig USB to force the device to download mode but it doesn't work.
Please help me it's very important to me. I Appropriate your bits of help.
omar raza said:
Hello,
I have a problem, today I install the combination file to my SM-J410F Samsung device but it not work I get %80 and failed and write something (like custom binary fused ) but after that I want to download another Stock firmware but I noticed that it cannot into download mode and when I Press Vol up + power it only show the Samsung logo and turn off, I try many times but it's something.....
I also use jig USB to force the device to download mode but it doesn't work.
Please help me it's very important to me. I Appropriate your bits of help.
Click to expand...
Click to collapse
You are hardware bricked, your Samsung has a hardware component that, once tripped, will not let the device boot.
You tripped the "fuse" by attempting to flash TWRP or some other custom software not approved by your manufacturer or carrier.
Next time, do better research before attempting to modify your device.
Sent from my SM-S767VL using Tapatalk
Did you try Vol- and power button If it doesn't work the volume up and down and power button
muhammad42620 said:
Did you try Vol- and power button If it doesn't work the volume up and down and power button
Click to expand...
Click to collapse
Its volume down+home+power if the device has a home button.
Or volume down+power if the device does not have a home button.
Or a USB jig
If none of these work to get the device booted into download mode, the only options left are a JTAG/Riff/Octobox service or replace the motherboard.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Its volume down+home+power if the device has a home button.
Or volume down+power if the device does not have a home button.
Or a USB jig
If none of these work to get the device booted into download mode, the only options left are a JTAG/Riff/Octobox service or replace the motherboard.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
Here is a guide for booting your phone in download mode
https://www.hardreset.info/devices/samsung/samsung-galaxy-j4-core/download-mode/
guys my problem is that my sm-j410f doesn't have home button but I tried many times with another VOL-, Vol +, power, I tested all possibility it doesn't work and also I use a JIG USB it's worked on two devices like galaxy s5, and galaxy s6 edge but when I use it form J4 Core if phone power off it cannot turn on even if I press power button , and if I power button when See Samsung logo and insert Jig USB it power off the device immediately,
this problem happens to me while I want to install Combination rom using Odin to my phone.
Guys, please help.