Hello,
I just updated the firmware of my brand new Note 10.1 (N8000) using Kies, which seems to have failed - I can't even turn the device off. I'm a quite experienced computer user, but brand new to Android. Any help or feedback would be very much appreciated (esp. how I can at least turn off the device).
Problem Description:
I have a new Note 10.1 (a German device/I'm in Germany using the Vodafone network, but I guess that shouldn't matter) and installed Kies today. The application identified a new firmware and suggested an update, which I did via USB. Everything appeared to have gone all right - the file got downloaded, transferred to the device, which then showed that it was installing the updates (something like 95 items). No error message. The device then booted, and that's where it seems to be stuck: since then, the device is in an endless loop: Screen is black, a swirling animation comes up, than the Samsung Logo, which stays for like 12 seconds, the screen goes black and it starts from the beginning (in total the loop takes like 15 secondes). Kies cannot connect to the device, and I can't even turn it off, it's just stuck in this endless loop.
Before the update, the device was neither modified nor rooted (I only installed a few apps), and there was no error message during the update (at least none that I saw).
Can anyone help???
Get the firmware file from sammobile and flash with odin. You can find a lot of how to regarding Odin, just do a search and you will find a movie or tutorial.
Here is the fw
http://www.hotfile.com/dl/178817278/616d7ef/N8000XXBLJ9_N8000OXABLJ9_DBT.zip.html
The link is from sammobile, not a mirror, so it's safe.
Or you could just return it for an exchange.
Sent from my GT-N8010 using Tapatalk 2
To turn off, just press power until it turns off (about 10 seconds)...
Kies firmware failed N8010
ultramag69 said:
To turn off, just press power until it turns off (about 10 seconds)...
Click to expand...
Click to collapse
Hi there, I have the same problem but with N8010, after firmware update witch FAILED , my N8010 shows .... Firmwareas encountered an issue , Try to recover with Kies...
No way to recover with Kies, I've tryied with Odin flashing the original firmware Ics 404 " Odin flash PASSED, N8010 restart after flashing first start " Samsung note 10.1.. " but no going further it statck ther, I flashed again in Odin Jb 4.1.2 ... Odin Pass, N8010 reboot , Samsung note 10.1 go further Sound and Samsung logo come up but it stack there, I can not turn my N8010 off, if I push the Power botton it reboot again and stack after the souns and Samsung logo!!!
I can enter in Download mode for flashing again but can not get my N8010 further , Please HELP!! " dont know what to do .
ThankYou in advantage
Greetings
Joey
EagleTalon1 said:
Hi there, I have the same problem but with N8010, after firmware update witch FAILED , my N8010 shows .... Firmwareas encountered an issue , Try to recover with Kies...
No way to recover with Kies, I've tryied with Odin flashing the original firmware Ics 404 " Odin flash PASSED, N8010 restart after flashing first start " Samsung note 10.1.. " but no going further it statck ther, I flashed again in Odin Jb 4.1.2 ... Odin Pass, N8010 reboot , Samsung note 10.1 go further Sound and Samsung logo come up but it stack there, I can not turn my N8010 off, if I push the Power botton it reboot again and stack after the souns and Samsung logo!!!
I can enter in Download mode for flashing again but can not get my N8010 further , Please HELP!! " dont know what to do .
ThankYou in advantage
Greetings
Joey
Click to expand...
Click to collapse
I'm having the same issue!!!!!
Kies failed! Odin PASS and stuck in the logo!, it doesnt boot!
You may need to go into recovery and wipe data/cache partition. This will wipe your internal memory of everything but you will get an operational note...
Model Number: SM-N900A
Android Version: 4.3
Build Number: JSS15J.N900AUCUBMI9
Attempted to root my AT&T Note 3 due to the GPS failure issue using root_de_la_Vega.
The root failed using N900AUCUBMI9_OneClickBin.exe and I ended up with the error “Firmware upgrade encountered an issue”
I wasn't able to boot into recovery and Kies wouldn't recognize the device so I had to use a PIT file and then do a factory restore to correct the soft brick from the initial attempt.
I flashed back to the stock Samsung firmware successfully (somewhat) but Kies won't do any additional udates.
I now am getting constant popups "Unfortunately, Direct pen input has stopped".
I confirmed that in the application manager MyScriptResourceManager is on. It needed an update which I applied and then I rebooted it without success. I then turned the manager off and on again in case that was the problem but the popups are still constant.
I'm not sure how to fix it. Any advice you have would be great.
Yesterday I Installed android 5.1 on my Samsung Galaxy S II with help of a tutorial video( The ROM I installed CM 12.1 Android 5.1.1) it all worked fine downloaded some apps like Pokemon go and it still worked fine until a update of cyanogenmod came up so I installed it restarted the phone, then the wifi connection started to do weird so I went to updates to see if there was an other update which I might have missed. There was one so I clicked it downloaded the update then I saw it was an old update. When the update rebooted the phone it didn't wanted to start. I think I downloaded an old update over a new update. I coulnd't get past the samsung logo cuz the screen would turn black . So I readed that I should reflash stock firmware via Odin which I did but now my phone keeps stuck at the samsung logo.
When I started the phone I did get the start screen
Samsung Galaxy S II
GT-I9100
then the samsung logo pops up
the intro music plays and that's it then it keeps repeating this steps all the time
also the recovery mode button combination doesn't seem to work so I cant get in recovery mode.
When I try to charge the phone
the screen stucks on the battery loading image
Hopefully someone has any ideas how to fix this problem and get my phone on and working again.
XDA Visitor said:
Yesterday I Installed android 5.1 on my Samsung Galaxy S II with help of a tutorial video( The ROM I installed CM 12.1 Android 5.1.1) it all worked fine downloaded some apps like Pokemon go and it still worked fine until a update of cyanogenmod came up so I installed it restarted the phone, then the wifi connection started to do weird so I went to updates to see if there was an other update which I might have missed. There was one so I clicked it downloaded the update then I saw it was an old update. When the update rebooted the phone it didn't wanted to start. I think I downloaded an old update over a new update. I coulnd't get past the samsung logo cuz the screen would turn black . So I readed that I should reflash stock firmware via Odin which I did but now my phone keeps stuck at the samsung logo.
When I started the phone I did get the start screen
Samsung Galaxy S II
GT-I9100
then the samsung logo pops up
the intro music plays and that's it then it keeps repeating this steps all the time
also the recovery mode button combination doesn't seem to work so I cant get in recovery mode.
When I try to charge the phone
the screen stucks on the battery loading image
Hopefully someone has any ideas how to fix this problem and get my phone on and working again.
Click to expand...
Click to collapse
Hi and welcome to XDA.
Please create an account so you can have full posting privileges.
Then you can post post in your device section:
Galaxy S II Q&A, Help & Troubleshooting
Experts there may be able to help you.
Good luck
Hi, I recently rooted my phone last night to switch emoji and hopefully be able to use Snapprefs. The rooting process went smoothly (I used SuperSU and Odin) And I was able to switch emojis perfectly fine. This morning, I went to show a friend the steps I used to root my phone, and made a small, yet detrimental mistake. I turned off USB debugging and OEM to show the two options, but forgot to turn them back on before I restarted my phone, and I am now stuck with "Custom Binary blocked by FRP". I've tried to flash the stock frameware for my phone from multiple sources, but continue to get the "NAND write start!" Write failed error. I am using a USB 2.0 port with the original samsung cable, and I am running Odin as a administrator. I have also tried factory reset in stock recovery mode, as well as clear cache. I have the Samsung Galaxy S6 SM-G920P. Please help ASAP.
Good morning dear. I would like to know if someone has happened that after installing any official version for S6 920F appears an error that says that the phone has stopped and starts to fail completely, without Network but if it has imei. This happens after finishing with PASS in green. I could go into download mode and update it again and give the same error. I did it again with BTU firmware it gives me the same error again. I do not know what to do. please help. SMG920F 6.0.1
why you don't use smart switch to recover your phone?