Hi, sorry if I posted in the wrong section. But I cant seem to find any info on TWRP or even official Update.app for this MediaPad T2 7.0 not Pro BGO-DL09. Things done:
1. Bootloader unlocked. (Huawei unlock bootloader page, fastboot oem unlock [the code] ok)
2. Update to the latest version via OTA. (Android 6.0 Emui 4.0 Build number BGO-DL09C209B008)
3. Fastboot boot twrp that i borrowed from mediapad m2 8.0 (official twrp) (not working, operation not allowed)
4. Cant seem to find this particular BGO-DL09C209B008 in official Update.app format.
5. How to actually install and patch boot.img for magisk if I dont have TWRP?
6. Every time I fully shut down the device and reboot it, that dm-verity warning showed up. How to get rid of it, without relocking the bootloader? Will flashing TWRP wipe the dm-verity screen?
7. No. I cannot just use any Update.app that I can get, just because the front is BGO-DL09. The region code is different. See the C209? Unless I can get my hands on any C209 region firmware, Im not going to cross region flash it.
Any help is very appreciated. Thank you.
Sorry to bump. Is there anyone here using this BGO-DL09 and successfully find the official recovery firmware package? need the file, just to be safe before doing anything. yep bootloader is unlocked already.
Have you found any solutions?
https://forum.xda-developers.com/android/help/root-huawei-mediapad-t2-7-0-bgo-dl09-t3705284
Thank you.
Off topic question: What is the latest EMUI/Android update version available for your T2 7.0 device?
Bootloader unlocked not get code
BGO-DL09. Things done:
1. Bootloader unlocked. (Huawei unlock bootloader page, fastboot oem unlock [the code] not ok)
Please help me i don't know how to do this
Can you share the direct link of EMUI unlocker Please help me
Related
This guide is for all those who are getting error while updating their mate 7 manually either by local update option or by 3 buttons combo option.
here we go: ( for eg. consider mt7-tl10 model imternation version currently on any firmware and you want to install b123 firmware )
1. Extract recovery from new update.app to be installed i.e. b123 firmware.
2. flash it in fastboot mode.
3. now try to update using any of the option either local update or 3 buttons, it will run smoothly and you are done.
basically first we have to install recovery of the new version we want to install.
same can be followed to easily update to lollipop firmware.
hope this might help someone
Thanks - I was wondering what I was doing wrong since I can't update anymore either OTA, or local update or three fingers method, I constantly get the message "software update failed" and I am stuck with KingUser.apk ...
Can I ask I few more questions (I have changed ROMs in other mobile phones but not on the Mate 7)...
1) Do I need to unlock my bootloader to flash anything (I assume yes, my phone is still unlocked) ?
2) Do I need to use the Huawei Extractor (this one: http://forum.xda-developers.com/showthread.php?t=2433454)?
3) The name of the recovery is recovery.img (I guess so)?
Thanks a lot,
Paolo
Anubis1965 said:
Thanks - I was wondering what I was doing wrong since I can't update anymore either OTA, or local update or three fingers method, I constantly get the message "software update failed" and I am stuck with KingUser.apk ...
Can I ask I few more questions (I have changed ROMs in other mobile phones but not on the Mate 7)...
1) Do I need to unlock my bootloader to flash anything (I assume yes, my phone is still unlocked) ?
2) Do I need to use the Huawei Extractor (this one: http://forum.xda-developers.com/showthread.php?t=2433454)?
3) The name of the recovery is recovery.img (I guess so)?
Thanks a lot,
Paolo
Click to expand...
Click to collapse
1. Yes bootloader needs to be unlocked .
2. Yes, huawei extractor is required.
3. Yes it is recovery.img. You have to flash it in fastboot mode
This is the Original Stock Image Boot and Recovery of Zenfone 3 NOUGAT
Zenfone 3 5.2 (ZE520KL) - "Z017D_WW_14.2015.1701.8"
Google Drive Link: goo.gl/N8QOvS
Zenfone 3 5.5 (ZE552KL) - "Z012D_WW_14.2015.1701.8"
Google Drive Link: goo.gl/hoh38Q
how to install??
itsme.Ronjie said:
This is the Original Stock Image Boot and Recovery of Zenfone 3 NOUGAT
Zenfone 3 5.2 (ZE520KL) - "Z017D_WW_14.2015.1701.8"
Google Drive Link: goo.gl/N8QOvS
Zenfone 3 5.5 (ZE552KL) - "Z012D_WW_14.2015.1701.8"
Google Drive Link: goo.gl/hoh38Q
Click to expand...
Click to collapse
ThX for this...
can you explain to install?
this operations can re-unlock the bootloader?
have to install after the unloock bootloader and after that have installed nougat?
...and it for ww version or all version?
thank's for the cooperation..
gex185 said:
ThX for this...
can you explain to install?
this operations can re-unlock the bootloader?
have to install after the unloock bootloader and after that have installed nougat?
...and it for ww version or all version?
thank's for the cooperation..
Click to expand...
Click to collapse
Oh I forgot. That's WW Version
Need to restart your phone from Fastboot and you need adb on your computer.
Here's the code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
If you unlock the bootloader before the nougat. You can Install Nougat but it will autoshutdown the unit because the Boot.img and Recovery.img is still in Marsmallow OS.
gex185 said:
ThX for this...
can you explain to install?
this operations can re-unlock the bootloader?
have to install after the unloock bootloader and after that have installed nougat?
...and it for ww version or all version?
thank's for the cooperation..
Click to expand...
Click to collapse
it cant reunlock the bootloader.
itsme.Ronjie said:
Oh I forgot. That's WW Version
Need to restart your phone from Fastboot and you need adb on your computer.
Here's the code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
If you unlock the bootloader before the nougat. You can Install Nougat but it will autoshutdown the unit because the Boot.img and Recovery.img is still in Marsmallow OS.
Click to expand...
Click to collapse
meaning those who had unlocked bootloader can't update to Nougat then?
Tohan15 said:
meaning those who had unlocked bootloader can't update to Nougat then?
Click to expand...
Click to collapse
Still Can, you have to install the modify 'NoVerity.zip'
itsme.Ronjie said:
Oh I forgot. That's WW Version
Need to restart your phone from Fastboot and you need adb on your computer.
Here's the code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
If you unlock the bootloader before the nougat. You can Install Nougat but it will autoshutdown the unit because the Boot.img and Recovery.img is still in Marsmallow OS.
Click to expand...
Click to collapse
Hi dude, i have installed the Nougat version this morning and my phone is turning off after 10sec after power on. I have never unlocked the bootloader before. I have tried your above solution but still having the same issue. Can you pls help me ?
Note : Problem solved ; i've downloaded and installed again the official Nougat from Asus web site and it works. Later I have unlocked bootloader and rooted my phone but now is got the dm-verity warning again but this time in orange but it can boot and work properly. I'm looking for a way to get rid of the dm-verity warning at all.
naruto_kun said:
Hi dude, i have installed the Nougat version this morning and my phone is turning off after 10sec after power on. I have never unlocked the bootloader before. I have tried your above solution but still having the same issue. Can you pls help me ?
Note : Problem solved ; i've downloaded and installed again the official Nougat from Asus web site and it works. Later I have unlocked bootloader and rooted my phone but now is got the dm-verity warning again but this time in orange but it can boot and work properly. I'm looking for a way to get rid of the dm-verity warning at all.
Click to expand...
Click to collapse
You can't remove that warning. Sorry
Hello,
Do you know where I can find boot.img and recovery.img for Z012D-WW-14.2020.1703.28
Thanks
Dear all, please does anyone have or help me to retrieve the original/stock recovery.img from zip file of firmware Version TIM-14.2015.1701.13 (Android N) ?
I'm very frustrated...
Thank you in advance for your help and support
Hi, I need some help.
I have ze520kl with WW_14.2020.1706.53 and twrp. Can I flash boot+recovery(from OP) and after it install update.zip(the same version - Z017D_WW_14.2015.1701.8 downloaded from asus)?
Need something more to do?
Dear all,
please does anyone have or help me to retrieve the original/stock recovery.img from zip file of firmware Version ASUS_Z012D-WW-14.2020.1708.56 (Android N) ?
Thanks you very much...
itsme.Ronjie said:
Oh I forgot. That's WW Version
Need to restart your phone from Fastboot and you need adb on your computer.
Here's the code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Hi everyone!
I have a Zenfone 3 operator branded (TIM).
I am still on Marshmallow with Locked Bootloader.
Can I use these ADB commands to overwrite my actual Stock Recovery and gain the WW Nougat Recovery?
Then I would enter the recovery to install the same WW Nougat ASUS ROM version.
In this way would I obtain to debrand my phone and get Nougat in one shot?
Can this be done with Locked Bootloader?
Thank You!
Links are down, please refresh
It works!
I just want to confirm to those who are wondering that installing the recovery and boot images along with the firmware from the Asus website works fine. Just make sure that you get the firmware that has the same version with the recovery+boot that the OP uploaded which is 14.2015.1701.8.
Phone hasn't shut down or rebooted on its own so there shouldn't be any worries as long as you do all the steps right.
Edit: I did this on a ZE520KL btw.
xonich said:
Dear all,
please does anyone have or help me to retrieve the original/stock recovery.img from zip file of firmware Version ASUS_Z012D-WW-14.2020.1708.56 (Android N) ?
Thanks you very much...
Click to expand...
Click to collapse
https://asus.kremowka.xyz/categories/show/2
Linked below is the Stock Factory Image for the MediaPad M5 8.4" WiFi US Variant.
SHT-W09 - Schubert W09 / W09A 8.4" MediaPad M5 WiFi
C567 - US Region
8.0.0.156 - Version
https://www.androidfilehost.com/?fid=3700668719832237984
This will get your device back to 100% stock.
This was the only firmware package that I managed to get a bricked device up and running with. Once extracting the zip, review the document ReleaseDoc\SHT Software Upgrade Guideline.doc for install instructions, but for me it was as simple as:
Extract the zip file
Copy the dload folder from Software\ into the root of a formatted Micro SD Card (as is, do not extract any other zip files in dload)
Reboot into the EMUI Recovery (from a powered off state: press and hold the Vol+ and Vol-, then press Power)
Wait...
On my device, I believe this kept the bootloader unlocked, but restored everything else including any custom recovery.
ChrisA918 said:
Linked below is the Stock Factory Image for the MediaPad M5 8.4" WiFi US Variant.
SHT-W09 - Schubert W09 / W09A 8.4" MediaPad M5 WiFi
C567 - US Region
8.0.0.156 - Version
https://www.androidfilehost.com/?fid=3700668719832237984
This will get your device back to 100% stock.
This was the only firmware package that I managed to get a bricked device up and running with. Once extracting the zip, review the document ReleaseDoc\SHT Software Upgrade Guideline.doc for install instructions, but for me it was as simple as:
Extract the zip file
Copy the dload folder from Software\ into the root of a formatted Micro SD Card (as is, do not extract any other zip files in dload)
Reboot into the EMUI Recovery (from a powered off state: press and hold the Vol+ and Vol-, then press Power)
Wait...
On my device, I believe this kept the bootloader unlocked, but restored everything else including any custom recovery.
Click to expand...
Click to collapse
Did you need to have the bootloader unlocked first before you did this?
Ie can I do this to a Chinese M5 8.4 to change the firmware from Chinese to US without the bootloader unlocked?
theslydog said:
Did you need to have the bootloader unlocked first before you did this?
Ie can I do this to a Chinese M5 8.4 to change the firmware from Chinese to US without the bootloader unlocked?
Click to expand...
Click to collapse
You don't need to have an unlocked bootloader. However, I do not know if you can go from Chinese to US. I only flashed the stock firmware that was specific to my device. You can give it a try, if it fails you can revert back to the China stock firmware which I also posted here: China Variant Stock
this worked for me, i couldn't get any of the firmware finder ones to install. was able to unlock bootloader with multi-tool 8. (dc-unlocker gave me the wrong key) and was able to root with twrp and magisk 17.
thanks
Okay, I will try to do this downgrade over the holidays and report back the results to see if it works for me. I have the same model and don’t want to pay $30Euro to unlock it. Will DC-Unlocker work after I downgrade? I believe that I need to unlock the boot loader prior to rooting the device....
tensux said:
this worked for me, i couldn't get any of the firmware finder ones to install. was able to unlock bootloader with multi-tool 8. (dc-unlocker gave me the wrong key) and was able to root with twrp and magisk 17.
thanks
Click to expand...
Click to collapse
I have a new SHT-AL09 with 172 firmware and a locked bootloader.
This firmware prohibits DC-Unlocker from reading the bootloader unlock code.
How do I downgrade to a previous firmware?
Try HuRUpdater: https://forum.xda-developers.com/mediapad-m5/how-to/unbrick-mediapad-m5-install-otas-t3856312
You should be able to install TWRP even with locked bootloader. Download the full OTA and follow the HuRUpdater instructions.
Has anyone tried it yet?
Don't want to be the first, since I do not feel too comfortable and I am awqy for a few days
kev1807 said:
Has anyone tried it yet?
Don't want to be the first, since I do not feel too comfortable and I am awqy for a few days
Click to expand...
Click to collapse
I think there is very little risk. Even when the downgrade fails, you should be able to just flash 172 again with HuRUpdater to restore back the original state. Don’t try to rollback too far, install the last version prior to 172 and try dc unlocker again.
I asked on a german Forum and got the response that TWRP cannot be installed with locked BL - which I find somewhat logical - however, I am reaching for the unlikely event that I can get an open Bootloader somehow....
I am a little confused by the instructions. I have to put the TWRP.img in the folder on the SD Card together with the HuRUpdater.zip file and the firmware zip files. But then what? How do I flash anything?
konradsa said:
Try HuRUpdater: https://forum.xda-developers.com/mediapad-m5/how-to/unbrick-mediapad-m5-install-otas-t3856312
You should be able to install TWRP even with locked bootloader. Download the full OTA and follow the HuRUpdater instructions.
Click to expand...
Click to collapse
I cannot flash TWRP with my locked bootloader. I get an error FAILED (remote: Command not allowed) when I try this when the M5 is in fastboot mode: fastboot flash recovery_ramdisk twrp.img
Found this on the last page of the HuRUpdater thread:
Absolute prerequisite: unlocked bootloader
I don't have this so is there another way to downgrade the firmware?
OK, bummer. You can try the dload method, not sure if that works for downgrades though: dload
konradsa said:
OK, bummer. You can try the dload method, not sure if that works for downgrades though: dload
Click to expand...
Click to collapse
I tried that already. It starts installing but at 5% it stops with an error: Software install failed
Flavio said:
I tried that already. It starts installing but at 5% it stops with an error: Software install failed
Click to expand...
Click to collapse
Firmware finder is probably your best bet: https://forum.xda-developers.com/honor-6x/help/to-bln-l21c185-t3578790
konradsa said:
Firmware finder is probably your best bet: https://forum.xda-developers.com/honor-6x/help/to-bln-l21c185-t3578790
Click to expand...
Click to collapse
Firmware Finder apparently does not work with EMUI8 anymore.
And there is no rollback package available for the M5.
I have always found a solution for these kind of problems on XDA (and I have had a bricked device or two) but for the moment I am at a loss.
Guess I will have to learn to live without root and with the stock Huawei firmware...
Flavio said:
I tried that already. It starts installing but at 5% it stops with an error: Software install failed
Click to expand...
Click to collapse
Flavio said:
Firmware Finder apparently does not work with EMUI8 anymore.
And there is no rollback package available for the M5.
I have always found a solution for these kind of problems on XDA (and I have had a bricked device or two) but for the moment I am at a loss.
Guess I will have to learn to live without root and with the stock Huawei firmware...
Click to expand...
Click to collapse
Sorry mate, tough luck. ? I think the hardware of the device is pretty nice, but the stock firmware is so full of crap and spyware, totally unacceptable.
when downgrading using dload, check for xloader version first.
https://forum.xda-developers.com/showthread.php?t=2433454
I jut downgraded my M5 AL19-CMR 8.0.0.172 back to 8.0.0.161 without any problems.
I used the firmware file from https://androidhost.ru/ I used the 8.0.0.161 dated 17.07.2018, I am in Germany and have as it seems the european version of the tablet!
kev1807 said:
when downgrading using dload, check for xloader version first.
https://forum.xda-developers.com/showthread.php?t=2433454
I jut downgraded my M5 AL19-CMR 8.0.0.172 back to 8.0.0.161 without any problems.
I used the firmware file from https://androidhost.ru/ I used the 8.0.0.161 dated 17.07.2018, I am in Germany and have as it seems the european version of the tablet!
Click to expand...
Click to collapse
For my SHT-AL09 there is no older firmware on androidhost.ru than B172.
I have downloaded the B163 and B152 firmware through Huawei Firmware Finder and I can extract it with HuaweiUpdateExtractor but then what?
Flavio said:
I have a new SHT-AL09 with 172 firmware and a locked bootloader.
This firmware prohibits DC-Unlocker from reading the bootloader unlock code.
How do I downgrade to a previous firmware?
Click to expand...
Click to collapse
From my latest findings:
Bootloader need to be unlocked for DOWNGRADE to sucess in firmware mode with a working dload service repair firmware.
With locked bootloader you'll only be able to DOWNGRADE in eRecovery mode with the latest firmware approved (It will be a downgrade only if said version is the latest approved fetched in eRecovery and inferior to yours current)
I did not find yet how the latest firmware shown/available in eRecovery is fetched into eRecovery. I think it happens in normal mode sometimes when you're connected online. You'll then have to reboot later to eRecovery to be shown...
Now, for your SHT-AL09 B172 with august 2018 secutity patches, the only way to downgrade is to get your unlock code and vice&versa.
Luckyly, third-party sellers are just starting to provide working bootloader's unlock code online for around 30~50€.
New devices are supported.
You just pay, gave them Model ID, IMEI1, Serial, Product ID and you'll get your code within the next hours.
You just pay, gave them Model ID, IMEI1, Serial, Product ID and you'll got it within the next hours. I already tested it on few devices.
FunkyHuawei does it for 130€ per device with other services included.
Flavio said:
For my SHT-AL09 there is no older firmware on androidhost.ru than B172.
I have downloaded the B163 and B152 firmware through Huawei Firmware Finder and I can extract it with HuaweiUpdateExtractor but then what?
Click to expand...
Click to collapse
I am also interested in rooting M5. Where you able to downgrade the tablet from B172 to B161?
No
I am also looking for a way to downgrade my Mediapad M5.
I have Hauwei MediaPad M5 CMR-AL09 (C432) currently running 8.0.0.192. dc-unlocker does not work with this version so I can not unlock bootloader.
This is what I have done:
* Format external sdcard into exfat. I used my Ubuntu Linux computer for this, sudo mkfs.exfat /dev/sdx1.
* Put the empty sdcard into the tablet.
* Download android app "Firmware Finder for Huawei" and I choose CMR-AL09C432B161 (8.0.0.161) FullOTA-MF. Downloaded that into update.zip file.
* I use android app FX File Explorer to get read/write access to the mediacard and to create the dload folder.
* I used android app FX File Explorer to extract only UPDATE.APP file into mediacard and the dload folder. The file is around 4.2GB in size when extracted. I also tried to put all files into dload folder but with the same result below.
* Open dialer and type in *#*#2846579#*#*. Go to software upgrade and choose SDCard upgrade. The tablet will now restart and do the downgrade.
* Problem now is that it goes into 5% and then fails.
Am guessing there is some protection to downgrade into 8.0.0.161 version.
Guys.. Let's solve this. :crying:
Blinkiz said:
I am also looking for a way to downgrade my Mediapad M5.
I have Hauwei MediaPad M5 CMR-AL09 (C432) currently running 8.0.0.192. dc-unlocker does not work with this version so I can not unlock bootloader.
This is what I have done:
* Format external sdcard into exfat. I used my Ubuntu Linux computer for this, sudo mkfs.exfat /dev/sdx1.
* Put the empty sdcard into the tablet.
* Download android app "Firmware Finder for Huawei" and I choose CMR-AL09C432B161 (8.0.0.161) FullOTA-MF. Downloaded that into update.zip file.
* I use android app FX File Explorer to get read/write access to the mediacard and to create the dload folder.
* I used android app FX File Explorer to extract only UPDATE.APP file into mediacard and the dload folder. The file is around 4.2GB in size when extracted. I also tried to put all files into dload folder but with the same result below.
* Open dialer and type in *#*#2846579#*#*. Go to software upgrade and choose SDCard upgrade. The tablet will now restart and do the downgrade.
* Problem now is that it goes into 5% and then fails.
Am guessing there is some protection to downgrade into 8.0.0.161 version.
Guys.. Let's solve this. :crying:
Click to expand...
Click to collapse
Hmhm. I downgraded my Mediapad M5 Pro from 8.0.0.172 to 8.0.0.161
This is what I did:
https://www.android-hilfe.de/forum/...uer-huawei-mediapad-m5-ab-08-2018.892304.html
(short paraphrase of my downgrade-"guide" at android-hilfe.de)
1) check xloader-version
2) Download the potential downgrade from androidfilehost.ru (this worked for me, again, M5 PRO (CMR-AL19), Europe! https://androidhost.ru/byu )
2.1) The structure inside is firmware-name>software>dload
2.2) copy dload onto your SD (root directory)
3)The downgrade-process
3.1) power off the device
3.2) Volume up AND down AND Power Button for some seconds
3.3) Downgrade should start! If folder is not recognized, a Pink screen will appear - just do it from the start.
After rebooting, you should then have the version you wanted to downgrade to.
I have done this several times ( accidently updated once or twice )and it worked without any trouble.
The 5% thing: it stayed at 5% for quite some time. But it always went on after some time, at least for me
I read somewhere, sometime ago that with Firmware Finder the security check that is somewhere included in the file is not removed and therefore you cannot use those files. It seems imperative to me that one uses androidhost.ru (no guarantee that this information is right - so feel free to correct me )
ah, sorry only now I realized that you specified CMR-AL09, we had someone do it for SHT-AL-09, sorry :-/
but why don't you try the files from androidhost.ru (download the correct firmware! I linked the one for the M5 Pro! )
Thanks kev1807 for the input.
I tried the firmware you linked to for Huawei MediaPad M5 CMR-AL09 (C432) version 8.0.0.161. It did not work.
I found the version 8.0.0.190 on androidfilehost.ru and that worked. So I have now downgraded from 8.0.0.192 to 8.0.0.190 but that will not help me much. Downgrading into 8.0.0.161 still does not work.
I was on 8.0.0.192 and manage to use the file
"Huawei MadiaPad M5 CMR-AL19 hw eu Cameron-AL09A 8.0.0.190(C432) Firmware 8.0.0 r1 EMUI8.0 05014XYB [androidhost.ru]"
I have tried these packages but they have not worked.
Huawei MadiaPad M5 CMR-AL09 hw ru Cameron-AL09A 8.0.0.181(C10)Firmware8.0.0r1EMUI8.005014YQD [androidhost.ru]
Huawei MadiaPad M5 CMRCameron-AL19B 8.0.0.161(C432) Firmware Android 8.0 EMUI 8.0 05014XYC androidhost.ru
I have Honor View 10 (berkeley) BKL-L09 on stock EMUI 10.0.0.179 (C432E6R1P4patch01) and would like to install Magisk but cannot find a copy of boot.img
The latest stock ROM version I have the UPDATE.APP for is 9.1.0.364(C432E5R1P13). I've extracted that but Magisk is unable to patch any of the files I have tried from that
Can anyone please give advice? Thank you!
Rollback to latest 9.1 with hisuite.
Use a third party tool to unlock your kirin980 bootloader.
Use magiskmanager to patch recovery_ramdisk.img extracted from your current firmware. (from an offline dload image or from an online image)
Flash patched recovery in fastboot.
On 9.1, the first time you want to boot recovery_ramdisk, you could use adb reboot recovery.
@oslo83 Could you please tell more about the third parity tools to unlock kirin980 bootloader or a link? Afaik it is not possible to unlock honor v10´s bootloader with tools. i tought you have to open the device an shorten two pins to get bootloader of v10 unlocked? Isnt´t a Kirin970 working in the Honor view 10?
I PM'ed you.
@oslo83 Could you please PM me too about the third parity tools to unlock kirin970 bootloader or a link?
My device: Honor View 10, BKL-L09, 10.0.0.187. I want downgrade it to 9.1 or 9.0, unlock bootloader and root with Magisk.
THX!
Cheapest tool actually available for kirin970 and 980 bootloader unlock with emui9.1 is hcu-client
oslo83 said:
I PM'ed you.
Click to expand...
Click to collapse
please could you pm me also thanks a ton inadvanced my honer view 10 is crashing like mad in play store whatsapp and youtube I am pretty sure it is huawei being a ......
Hello,
I'm sorry to dig up this topic, but isn't there a complete tutorial on how to downgrade and root V10?