Related
I've an honor 8 FRD-AL00. I've fastboot installed and I'm able to access it. I'm also able to access eRecovery.
I've used SRK Tool to change the oeminfo and custom.bin. After trying to install the official L09 I think I bricked my phone.
Here are the steps I've done:
- Unlock bootloader
- Install recovery 6.0
- Root
- Changed oeminfo and custom.bin
- Reboot and tried to install a stock recovery.img boot.img and system.img (which failed while installing it) from offical L09 UPDATE.APP.
Current status: unable to boot either to recovery or android. what should I do in order to get my phone or install the L09 update or at least something that I can use? I've also used the 3 button trick with the dload/UPDATE.APP in the memory card but the phone doesn't show the loading screen it gets stuck into the huawei logo.
I've then tried to install CM13. I've successfully installed twrp-recovery.img but I'm not able to access it (button + vol down nor button + vol up).
Thanks for the help
djx24 said:
I've an honor 8 FRD-AL00. I've fastboot installed and I'm able to access it. I'm also able to access eRecovery.
I've used SRK Tool to change the oeminfo and custom.bin. After trying to install the official L09 I think I bricked my phone.
Here are the steps I've done:
- Unlock bootloader
- Install recovery 6.0
- Root
- Changed oeminfo and custom.bin
- Reboot and tried to install a stock recovery.img boot.img and system.img (which failed while installing it) from offical L09 UPDATE.APP.
Current status: unable to boot either to recovery or android. what should I do in order to get my phone or install the L09 update or at least something that I can use? I've also used the 3 button trick with the dload/UPDATE.APP in the memory card but the phone doesn't show the loading screen it gets stuck into the huawei logo.
I've then tried to install CM13. I've successfully installed twrp-recovery.img but I'm not able to access it (button + vol down nor button + vol up).
Thanks for the help
Click to expand...
Click to collapse
Why did you change the oenimfo and custom.bin?
Sent from my Galaxy Tab 3 using XDA Labs
adriansticoid said:
Why did you change the oenimfo and custom.bin?
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
My main goal was to try to change from FRD-AL00 to FRD-L09. (chinese version to european)
djx24 said:
My main goal was to try to change from FRD-AL00 to FRD-L09. (chinese version to european)
Click to expand...
Click to collapse
Go back To stock .. try dload method body
Romiui said:
Go back To stock .. try dload method body
Click to expand...
Click to collapse
Doesn't work, it gets stuck at the huawei logo.
After a couple of tries I was able to get TWRP installed so I'm able to access and modify the filesystem.
I've noticed that, for some reason, my phone has the "default.prop" set up to "ro.product.model=eva" shouldn't this be FRD's or something like that?
Can someone provide me a copy of their /default.prop file so I could compare?
djx24 said:
Doesn't work, it gets stuck at the huawei logo.
After a couple of tries I was able to get TWRP installed so I'm able to access and modify the filesystem.
I've noticed that, for some reason, my phone has the "default.prop" set up to "ro.product.model=eva" shouldn't this be FRD's or something like that?
Can someone provide me a copy of their /default.prop file so I could compare?
Click to expand...
Click to collapse
Yes. EVA is another Honor phone. It can be caused of the process you did earlier.
Sent from my Galaxy Tab 3 using XDA Labs
adriansticoid said:
Yes. EVA is another Honor phone. It can be caused of the process you did earlier.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
Yes I think it's the P9, do you have a copy of a valid "default.prop" file?
Thank you
djx24 said:
Yes I think it's the P9, do you have a copy of a valid "default.prop" file?
Thank you
Click to expand...
Click to collapse
Unfortunately no man.
Sent from my Galaxy Tab 3 using XDA Labs
This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.
djx24 said:
This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.
Click to expand...
Click to collapse
Glad you fixed it.
Sent from my Galaxy Tab 3 using XDA Labs
Can you please share the instruction please? I have FRD-AL00 and I have followed the debrand steps from VDO - GUIDE
I can see the info that changed to FRD-L09C432B131 but when I play the video, the phone just restart.
Step by Step guide please
Transfer to European version
Hi, it whould be realy helpfull, if you consider to shere how you menadge to transfer to european rom from chinese al-00. It whoul hepl meny of forum members.
djx24 said:
This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.
Click to expand...
Click to collapse
Hey , Why ???
I changed from AL10 to L19C432 an have the same problem. By pictures and videos my phone reboots.
but not always. can someone help me? thanks
mawe5 said:
I changed from AL10 to L19C432 an have the same problem. By pictures and videos my phone reboots.
but not always. can someone help me? thanks
Click to expand...
Click to collapse
I also have the same mistakes. Help please ...
For now a moment there is no solution for those issues - the only way is to change back to AL00.
Before you do, please install HiSuite, this tool installs all necessary drivers as well.
1) Unlock bootloader and install TWRP: https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946
2) ROOT: Download SuperSU and flash it using TWRP
2.1) Power off, press volume up + power on
2.2) After TWRP loads, click on Install, select SuperSU zip file you just downloaded and flash it
2.3) Reboot
3) Debrand: https://www.youtube.com/watch?v=JZVsIKtdgV4&t=307s
3.1) This video shows how to debrand P9 but it works on Honor 8 (AL00, AL10, AL09 and AL19)
4) Flash new ROM
4.1) More info about ROMs: https://forum.xda-developers.com/honor-8/how-to/frd-al-00-04-09-10-14-19-differences-t3452924
4.2) ALXX ROM download: https://forum.xda-developers.com/ho...rk-tool-huawei-bootloader-root-t3470823/page3
4.2) LXX ROM download: https://www.androidsage.com/2016/12...rshmallow-emui-5-0-4-1-stock-firmware-update/
Hope this helps but please note FRD-L09 ROM running on FRD-AL00 phone is unstable.
Please let me know if you have any other questions.
---------- Post added at 11:42 PM ---------- Previous post was at 11:39 PM ----------
qsqa said:
For now a moment there is no solution for those issues - the only way is to change back to AL00.
Click to expand...
Click to collapse
Do you know if is there any hardware difference between AL00 and L09? What is the reason phone gets so unstable when you debrand to L09 and flash EU ROM?
i have honor 8 FRD-AL00C00B377 , i need unlock bootloader, but no have option in developer ( OEM UNLOCK ) , in CMD the code , adb unlock bootloader ( my code ) no work , FAIL
i need change my chines version for internacional, is possible ???
aureliomilitao said:
i have honor 8 FRD-AL00C00B377 , i need unlock bootloader, but no have option in developer ( OEM UNLOCK ) , in CMD the code , adb unlock bootloader ( my code ) no work , FAIL
i need change my chines version for internacional, is possible ???
Click to expand...
Click to collapse
adb reboot bootloader
fastboot oem unlock xxxxxxxxxxxxxxxx
I think my command is right.
Hi, sorry if I posted in the wrong section. But I cant seem to find any info on TWRP or even official Update.app for this MediaPad T2 7.0 not Pro BGO-DL09. Things done:
1. Bootloader unlocked. (Huawei unlock bootloader page, fastboot oem unlock [the code] ok)
2. Update to the latest version via OTA. (Android 6.0 Emui 4.0 Build number BGO-DL09C209B008)
3. Fastboot boot twrp that i borrowed from mediapad m2 8.0 (official twrp) (not working, operation not allowed)
4. Cant seem to find this particular BGO-DL09C209B008 in official Update.app format.
5. How to actually install and patch boot.img for magisk if I dont have TWRP?
6. Every time I fully shut down the device and reboot it, that dm-verity warning showed up. How to get rid of it, without relocking the bootloader? Will flashing TWRP wipe the dm-verity screen?
7. No. I cannot just use any Update.app that I can get, just because the front is BGO-DL09. The region code is different. See the C209? Unless I can get my hands on any C209 region firmware, Im not going to cross region flash it.
Any help is very appreciated. Thank you.
Sorry to bump. Is there anyone here using this BGO-DL09 and successfully find the official recovery firmware package? need the file, just to be safe before doing anything. yep bootloader is unlocked already.
Have you found any solutions?
https://forum.xda-developers.com/android/help/root-huawei-mediapad-t2-7-0-bgo-dl09-t3705284
Thank you.
Off topic question: What is the latest EMUI/Android update version available for your T2 7.0 device?
Bootloader unlocked not get code
BGO-DL09. Things done:
1. Bootloader unlocked. (Huawei unlock bootloader page, fastboot oem unlock [the code] not ok)
Please help me i don't know how to do this
Can you share the direct link of EMUI unlocker Please help me
Hi,
I'm looking for a solution to root Huawei Mate 20. I couldn't find much on web search about this topic.
I am also not able to find a way to install TWRP or unlock boot loader.
Any ideas?
Sent from my HMA-L29 using Tapatalk
My phone got an update about a week ago. The details didn't mention Anything about boot loader unlocking but when I checked after the update, there was the ability to unlock the bootloader.
I have already opened the developed settings since november but the bootloader unlock option was greyed out and could not be turned on. I read a post from a different thread that his phone recently got an update with the option to turn on the bootloader unlock option. I have been regularly checking for update since I read that post and so last week I finally got it. I am now able to toggle the switch but I did not finish the process because I want to make sure it doesn't cause any warranty issues. I have been a Samsung user and I am very familia with the "warranty void 0x1" issue so I always waited until my warranty was over before rooting my phone. That way everythung has been tried and tested before I take a leap. If you do get the update please post your experience in unlocking the bootloader and eventually rooting your phone.
Sent from my HMA-L29 using Tapatalk
Maybe try kingroot? If it gets the job done on the pro version it might do it here as well.
Found it: https://www.techdroidtips.com/install-custom-rom-huawei-mate-20-cwm-twrp/ https://www.techdroidtips.com/root-huawei-mate-20/
patch recovery_ramdisk.img in latest magisk manager canary build, and flash the patched_boot.img to recovery_ramdisk through fastboot - voila, you are rooted now, you just have to boot to recovery afterwards (will start to system anyway).
I could also upload my patched recovery_ramdisk.img if you want. Would work for you aswell.
Regards
Hi please create a new thread how to root the phoneee?
Oem unlock is back :cyclops:
Hi, I can't find Twrp for huwaei Mate 20 can you help me?
Wysłane z mojego HMA-L09 przy użyciu Tapatalka
OldDroid said:
patch recovery_ramdisk.img in latest magisk manager canary build, and flash the patched_boot.img to recovery_ramdisk through fastboot - voila, you are rooted now, you just have to boot to recovery afterwards (will start to system anyway).
I could also upload my patched recovery_ramdisk.img if you want. Would work for you aswell.
Regards
Click to expand...
Click to collapse
Mate please help us.
EDIT:
sorry, now found your post: https://forum.xda-developers.com/mate-20/how-to/guide-manual-updating-firmware-t3892686
so only way to get root it's paying for bootloader code?
OldDroid said:
patch recovery_ramdisk.img in latest magisk manager canary build, and flash the patched_boot.img to recovery_ramdisk through fastboot - voila, you are rooted now, you just have to boot to recovery afterwards (will start to system anyway).
I could also upload my patched recovery_ramdisk.img if you want. Would work for you aswell.
Regards
Click to expand...
Click to collapse
Did you test it on EMUI 9.1 Roms?
Seems it doesn't work. I tried patching using the Canary build mentioned above and even used 19.0.
Neither of them worked, The end results is a bootloop.
Any ideas ?
JazonX said:
Did you test it on EMUI 9.1 Roms?
Seems it doesn't work. I tried patching using the Canary build mentioned above and even used 19.0.
Neither of them worked, The end results is a bootloop.
Any ideas ?
Click to expand...
Click to collapse
nope, my international mate 20 didn't receive 9.1 yet.
Regards
There is info about root EMUI 9.1 for mate 20X on XDA. "[GUIDE] Root AL00 EMUI 9.1"- https://forum.xda-developers.com/mate-20-x/how-to/guide-root-al00-emui-9-1-t3938483. You need Ramdisk for your device and patche it. Also it is possible to extract Ramdisk from full firmware. Now i have a problem to download full firmware for my phone - HMA-L29 9.1.0.310(C10E10R2P1). I tried https://support.halabtech.com/index.php?a=downloads&b=folder&id=35991 but it is impossible to download zip file. Is there another way to get this firmware?
Look this thread, the firmare was upload in google drive.
https://forum.xda-developers.com/mate-20/how-to/emui-9-1-t3943112/page6
ZTNL said:
Look this thread, the firmare was upload in google drive.
https://forum.xda-developers.com/mate-20/how-to/emui-9-1-t3943112/page6
Click to expand...
Click to collapse
Thank you! Downloaded from https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=149496 at last.
Now I have root root for HMA-L29, 9.1.0.300(C10E10R2P1) through Magisk 19.4 (Magisk Manager 7.3.3 ). I had root for 9.0.0.245 with the same Magisk. Downloaded firmware HMA-L29 9.1.0.310(C10E10R2P1) from https://support.halabt…e&c=download&id=149496 , extracted RECOVERY_RAMDIS.img, copied to mate 20 9.0.0.245, patched by Magisk. File is magisk_patched9.1.img. It can be downloaded from https://drive.google.c…Jq_6WNOxgdY5nK4VxLHE86. Then flashed RECOVERY_RAMDIS.img from 9.0.0.245 by adb, updated to 9.1.0.300(C10E10R2P1) and flashed magisk_patched9.1.img by adb. That's all.
Need Unlocked Bootloader?
vstrglv said:
Thank you! Downloaded from https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=149496 at last.
Now I have root root for HMA-L29, 9.1.0.300(C10E10R2P1) through Magisk 19.4 (Magisk Manager 7.3.3 ). I had root for 9.0.0.245 with the same Magisk. Downloaded firmware HMA-L29 9.1.0.310(C10E10R2P1) from https://support.halabt…e&c=download&id=149496 , extracted RECOVERY_RAMDIS.img, copied to mate 20 9.0.0.245, patched by Magisk. File is magisk_patched9.1.img. It can be downloaded from https://drive.google.c…Jq_6WNOxgdY5nK4VxLHE86. Then flashed RECOVERY_RAMDIS.img from 9.0.0.245 by adb, updated to 9.1.0.300(C10E10R2P1) and flashed magisk_patched9.1.img by adb. That's all.
Click to expand...
Click to collapse
Could you give a short tutorial of how you did that? Did you have to unlock bootloader?
I guess that unlocked bootloader is required to flash boot image, but I hope to be wrong
Yes, I have unlocked bootloader.
vstrglv said:
Yes, I have unlocked bootloader.
Click to expand...
Click to collapse
Where did you get the bootloader unlock codes? HW no longer support to release it...
I got unlock code on this forum from Crys18 on 30.03.2019 for $6.
Root on EMUI 10
Has anyone rooted the new EMUI 10? Can you give me a how to?
vstrglv said:
I got unlock code on this forum from Crys18 on 30.03.2019 for $6.
Click to expand...
Click to collapse
How can I contact him?
Plz can anyone help me debranding my Bln-L21?
MAK7246 said:
Plz can anyone help me debranding my Bln-L21?
Click to expand...
Click to collapse
[Guide] Debranding to India variant BLN-L22 (successful case)- Noob Friendly
Update- Please flash the OEMINFO and Custom bin from - https://mega.nz/#!qYtlzawK!Ab86GUO40JpUZ8scGnaIszhA-3gf6bN4NdfuHb8IeBU via TWRP and then flash the B340 update.app file from download section via dload method. if you face any issue, follow...
forum.xda-developers.com
read also the lasts posts
Bro My one is Bln-l21 which rom should I debrand to can anyone give me link for the firmware?
MAK7246 said:
Bro My one is Bln-l21 which rom should I debrand to can anyone give me link for the firmware?
Click to expand...
Click to collapse
Follow this post:
[Guide] Debranding to India variant BLN-L22 (successful case)- Noob Friendly
Update- Please flash the OEMINFO and Custom bin from - https://mega.nz/#!qYtlzawK!Ab86GUO40JpUZ8scGnaIszhA-3gf6bN4NdfuHb8IeBU via TWRP and then flash the B340 update.app file from download section via dload method. if you face any issue, follow...
forum.xda-developers.com
the B340 update.app link is in the one right after.
If you don't have/know about TWRP recovery:
[GUIDE] Root Huawei Honor 6X and install TWRP custom recovery (EMUI 5.X)
Note- Applicable for Windows 7, Windows 8 and Windows 10 Similar steps are applicable for EMUI 4.X as well but TWRP file will change. Hi Folks, There are few threads but most of them are old or for EMUI 4.X and users having issues while...
forum.xda-developers.com
the unlock code for your bootloader is available throught "DC unlocker" software for 4 € .
Will my device get EMUI 8 after debrand?
MAK7246 said:
Will my device get EMUI 8 after debrand?
Click to expand...
Click to collapse
Nope, you would just have done step 2 of the following post, you also have to do step 3 then:
Thread '[HONOR 6x EMUI 8.X Oreo] Installing EMUI 8.X on Honor 6X EMUI 5.X and RAM extend via SD Card' https://forum.xda-developers.com/t/...-emui-5-x-and-ram-extend-via-sd-card.4237453/
Bro where can I get stock recovery and stock erecovery
Cause I successfully debranded!
MAK7246 said:
Bro where can I get stock recovery and stock erecovery
Cause I successfully debranded!
Click to expand...
Click to collapse
they sould be in HUawei "full" rom package. Use the soft "huawei update extractor"
Djiban said:
they sould be in HUawei "full" rom package. Use the soft "huawei update extractor"
Click to expand...
Click to collapse
Bro do u have the full emui 8 firmware for Honor 6x?
@Djiban bro my build is same though it updated to emui 8 for not having the full firmware package!Do u have the full firmware?
Bro my build no. Is still same after upgrading from emui 5.0.1 to emui 8 because of not having the full firmware.do u have the full firmware package for Emui 8 honor 6x?
MAK7246 said:
Bro my build no. Is still same after upgrading from emui 5.0.1 to emui 8 because of not having the full firmware.do u have the full firmware package for Emui 8 honor 6x?
Click to expand...
Click to collapse
ok, there is a more recent EMUI stock firmware (B520):
Honor6X-BLN-L22HNC675CUSTC675D2B520 (8.0.0.520) - Shared with pCloud
Keep all your files safe, access them on any device you own and share with just the right people. Create a free pCloud account!
e.pcloud.link
you can use https://www.dropbox.com/s/via9iigwa5q37rf/HWOTA_BLN_Eng.zip
to install it. Some infos about that here.
You should be able to use dload official update, and somehow "Huawei updater" software or "Huawei Firmware Finder" soft or app, also to instal it.
BUT ANYWAY, you should have stock recovery already with the build you install to get EMUI 8 !!! Did you check? That would be the case, after installing the above B520.
If not, look inside those B520 zip files (using "Huawei update extractor" software for update.app if I remember well, google "Huawei update extractor" for all infos), you will get recovery .img files. Flashable with Fastboot or twrp recovery.
But I thnik you are already on stock recovery, or will be after B520 update
Djiban said:
ok, there is a more recent EMUI stock firmware (B520):
Honor6X-BLN-L22HNC675CUSTC675D2B520 (8.0.0.520) - Shared with pCloud
Keep all your files safe, access them on any device you own and share with just the right people. Create a free pCloud account!
e.pcloud.link
you can use https://www.dropbox.com/s/via9iigwa5q37rf/HWOTA_BLN_Eng.zip
to install it. Some infos about that here.
You should be able to use dload official update, and somehow "Huawei updater" software or "Huawei Firmware Finder" soft or app, also to instal it.
BUT ANYWAY, you should have stock recovery already with the build you install to get EMUI 8 !!! Did you check? That would be the case, after installing the above B520.
If not, look inside those B520 zip files (using "Huawei update extractor" software for update.app if I remember well, google "Huawei update extractor" for all infos), you will get recovery .img files. Flashable with Fastboot or twrp recovery.
But I thnik you are already on stock recovery, or will be after B520 update
Click to expand...
Click to collapse
My current one is B520 just the bui
Djiban said:
ok, there is a more recent EMUI stock firmware (B520):
Honor6X-BLN-L22HNC675CUSTC675D2B520 (8.0.0.520) - Shared with pCloud
Keep all your files safe, access them on any device you own and share with just the right people. Create a free pCloud account!
e.pcloud.link
you can use https://www.dropbox.com/s/via9iigwa5q37rf/HWOTA_BLN_Eng.zip
to install it. Some infos about that here.
You should be able to use dload official update, and somehow "Huawei updater" software or "Huawei Firmware Finder" soft or app, also to instal it.
BUT ANYWAY, you should have stock recovery already with the build you install to get EMUI 8 !!! Did you check? That would be the case, after installing the above B520.
If not, look inside those B520 zip files (using "Huawei update extractor" software for update.app if I remember well, google "Huawei update extractor" for all infos), you will get recovery .img files. Flashable with Fastboot or twrp recovery.
But I thnik you are already on stock recovery, or will be after B520 update
Click to expand...
Click to collapse
Bro I updated to emui 8 using the update.zip and huru updater using howtabln the one which u have given but after updating the build number was supposed to be b520 but it remain unchanged I don't know the reason but emui was successfully updated to emui 8!
MAK7246 said:
My current one is B520 just the bui
Bro I updated to emui 8 using the update.zip and huru updater using howtabln the one which u have given but after updating the build number was supposed to be b520 but it remain unchanged I don't know the reason but emui was successfully updated to emui 8!
Click to expand...
Click to collapse
you are not on B520 obviously, install the B520 provided in my previous post. You should have stock recovery afterwards
MAK7246 said:
My current one is B520 just the bui
Bro I updated to emui 8 using the update.zip and huru updater using howtabln the one which u have given but after updating the build number was supposed to be b520 but it remain unchanged I don't know the reason but emui was successfully updated to emui 8!
Click to expand...
Click to collapse
Bro is the rom indian or Chinese?
Djiban said:
you are not on B520 obviously, install the B520 provided in my previous post. You should have stock recovery afterwards
Click to expand...
Click to collapse
@Djiban bro but the link which u have given in china variant,Indian variant does not have HNC in build number,am I right?
@Djiban can u send the screenshot of ur system info I mean build info of honor 6x!
I m getting getting package info failed in erecovery since debrand can anybody help me fix this?model bln 22 emui 8 debranded from BLN-L22.
Djiban said:
Follow this post:
[Guide] Debranding to India variant BLN-L22 (successful case)- Noob Friendly
Update- Please flash the OEMINFO and Custom bin from - https://mega.nz/#!qYtlzawK!Ab86GUO40JpUZ8scGnaIszhA-3gf6bN4NdfuHb8IeBU via TWRP and then flash the B340 update.app file from download section via dload method. if you face any issue, follow...
forum.xda-developers.com
the B340 update.app link is in the one right after.
If you don't have/know about TWRP recovery:
[GUIDE] Root Huawei Honor 6X and install TWRP custom recovery (EMUI 5.X)
Note- Applicable for Windows 7, Windows 8 and Windows 10 Similar steps are applicable for EMUI 4.X as well but TWRP file will change. Hi Folks, There are few threads but most of them are old or for EMUI 4.X and users having issues while...
forum.xda-developers.com
the unlock code for your bootloader is available throught "DC unlocker" software for 4 € .
Click to expand...
Click to collapse
Hello, I am having trouble using the DC-Unlocker software. I am trying to follow this tutorial from their official website to unlock the bootloader of my Huawei Mate 9 Lite (BLL-L23) but HiSuite does not seem to work. It shows a pop-up saying "HiSuite will be installed in your device" and then another saying "Instalation error. System version is too old". And then nothing happens, and HiSuite doesn't even recognize my phone.
I have Android 6.0 Marshmallow and I'm trying to upgrade to Android 7.0 Nougat. Also, I have EMUI 4.1.3, and if I'm not mistaken, I should be able to upgrade it to EMUI 5.0.
EDIT: HiSuite seems to have installed the drivers 'Android Adapter PCUI' and 'DBAdapter Reserved Interface' despite the error, but not the 'Android Adapter Modem #2' one, and I don't know how to install it. I'd like to know I have everything needed to proceed successfully before paying the 4.00 €.
thedolanduck said:
Hello, I am having trouble using the DC-Unlocker software. I am trying to follow this tutorial from their official website to unlock the bootloader of my Huawei Mate 9 Lite (BLL-L23) but HiSuite does not seem to work. It shows a pop-up saying "HiSuite will be installed in your device" and then another saying "Instalation error. System version is too old". And then nothing happens, and HiSuite doesn't even recognize my phone.
I have Android 6.0 Marshmallow and I'm trying to upgrade to Android 7.0 Nougat. Also, I have EMUI 4.1.3, and if I'm not mistaken, I should be able to upgrade it to EMUI 5.0.
EDIT: HiSuite seems to have installed the drivers 'Android Adapter PCUI' and 'DBAdapter Reserved Interface' despite the error, but not the 'Android Adapter Modem #2' one, and I don't know how to install it. I'd like to know I have everything needed to proceed successfully before paying the 4.00 €.
Click to expand...
Click to collapse
the tutorial you're following is the good one.
What is the OS version of your computer ? try another one!
Try also to install diectly the huwei drivers without hisuite:
Huawei_Android_USB_Driver
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Djiban said:
the tutorial you're following is the good one.
What is the OS version of your computer ? try another one!
Try also to install diectly the huwei drivers without hisuite:
Huawei_Android_USB_Driver
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Click to expand...
Click to collapse
Thank you for replying.
My PC runs on Windows 10, so I don't think that is a problem. I could try a Virtual Machine with another one though, which one do you recommend?
As for the instalation, do I have to uninstall my current drivers in order to install the ones you are providing me? Or does it not matter? I will try them ASAP.
P.S.: I found this thread in the DC-Unlocker forums of someone saying not all phones have the 'Android Adapter Modem #2' drivers and it should be possible to read the bootloader code of a Honor 6X without it (I am assuming that Mate 9 Lite == Honor 6X at this point). Should I trust this?
I apologize for the amount of questions, you just seem like an experienced person, and I thank you again for taking the time and having the patience of answering.
I bought my Mate 9 from China and it's never updated as you can see
I need to manually update it by the simplest method possible
I can unlock the bootloader but that's about it.
I've tried various ROMs but they all fail to load
I think it might be simpler to root it and then install an later rom
Any really simple guides to updating my Mate 9?
Same probem. i unlocked bootloader via potatoNV tool. but can't find a way to install twrp or to root my huawei mate 9 mha-l29c636b172 stuck on nougat 7 and emui 5. Please help.
We got a chance after so long to unlock the bootloader but still facing issues with rooting out device
my too is emui 5 Android 7
how update ??
aureliolage said:
my too is emui 5 Android 7
how update ??
Click to expand...
Click to collapse
Try dload method, stock firmware (Oreo, Pie) for region C636 can be found here
-Alf- said:
Try dload method, stock firmware (Oreo, Pie) for region C636 can be found here
Click to expand...
Click to collapse
no have firmwares dloa for dowload
{Mod edit: Quoted post has been deleted!}
hummmm but this files works dload ?
but need Oreo no can update for 9 first oreo
ok thanks
{Mod edit: Quoted post has been deleted!}
nedd more files
for dload now need update_MHA-L29_C63 _hw_spcseas + update.app ??
only Dload ( update.app) no go