Database Info

Gapps FC on 4.4.2

I am using terenceng's [ROM] CM-11.0 | Android 4.4.2 KitKat | Galaxy Tab 7" [Dec 12A/B, 2013] Dec. 12 B ROM (CM11/Android 4.2.2), and I am having problems installing and using Gapps. I have tried every version from the PA Gapps to the official CM Gapps from the wiki. All of them install just fine, however the apps FC, and setting up a Google account ends with it saying there was an error communicating with the servers.
Any help getting Gapps to work? I would like at least the Play Store so I could manually install the others.
Thanks!

furmada said:
I am using terenceng's [ROM] CM-11.0 | Android 4.4.2 KitKat | Galaxy Tab 7" [Dec 12A/B, 2013] Dec. 12 B ROM (CM11/Android 4.2.2), and I am having problems installing and using Gapps. I have tried every version from the PA Gapps to the official CM Gapps from the wiki. All of them install just fine, however the apps FC, and setting up a Google account ends with it saying there was an error communicating with the servers.
Any help getting Gapps to work? I would like at least the Play Store so I could manually install the others.
Thanks!
Click to expand...
Click to collapse
Are you running ART? If yes, have you resized your cache partition?
The PAGapps package in its native form is too large for the SGT7. Have you tried BaNkS 11-26_GApps_Core_4.4_signed? Never experienced a problem with this one on the latest ROMs from terenceng or storm31.

Will try the BaNkS Gapps
ulev said:
Are you running ART? If yes, have you resized your cache partition?
The PAGapps package in its native form is too large for the SGT7. Have you tried BaNkS 11-26_GApps_Core_4.4_signed? Never experienced a problem with this one on the latest ROMs from terenceng or storm31.
Click to expand...
Click to collapse
I am not running ART. I will try the Gapps you listed and see if they work.
Edit: They do not work. process com.google.process.gapps stops each time I go to add a Google account.

furmada said:
I am not running ART. I will try the Gapps you listed and see if they work.
Edit: They do not work. process com.google.process.gapps stops each time I go to add a Google account.
Click to expand...
Click to collapse
I suppose you should start over again and make sure this time you factory reset (wipe /cache, /dalvik and /data) and wipe the /system partition too just to be safe before you flash the ROM again. Then install the core Gapps again. I haven't seen dirty flashes work with any of these early 4.4.2 ROMs yet. You can use the latest ROM of course which is now 12-16 and offers the easy conversion to ART without a need to repartition ever. This seems to become the new thing...

Will try the new ROM
ulev said:
I suppose you should start over again and make sure this time you factory reset (wipe /cache, /dalvik and /data) and wipe the /system partition too just to be safe before you flash the ROM again. Then install the core Gapps again. I haven't seen dirty flashes work with any of these early 4.4.2 ROMs yet. You can use the latest ROM of course which is now 12-16 and offers the easy conversion to ART without a need to repartition ever. This seems to become the new thing...
Click to expand...
Click to collapse
I always wipe everything before flashing, especially if I have problems. I will try the newest ROM and let you know how it works out.

ulev said:
Are you running ART? If yes, have you resized your cache partition?
The PAGapps package in its native form is too large for the SGT7. Have you tried BaNkS 11-26_GApps_Core_4.4_signed? Never experienced a problem with this one on the latest ROMs from terenceng or storm31.
Click to expand...
Click to collapse
Where can I download this package from; cant seem to find it anywhere.

Just google it. GApps core 4.4.2. a link will come up to xda.
Sent from my SCH-I800 using xda app-developers app

[Q] Mi4 + TWRP + Mokee + Mokee GApps Play Store crashes HELP PLEASE!

Hi,
I wanted to switch from MIUI to Mokee on my Mi4, because I didn't want to wait for Android L on my device any longer. I installed the newest Mokee Rom via TWRP recovery (also newest version) and after a reboot I flashed the official Mokee GApps. Of course I did a full-wipe and facory reset and everything.
>Everytime the Playstore crashes and under Account Settings, there is no possibilty to add a Google account.<
I know, you have to go and check under Mokee Center and extras. I downloaded the GApps there (which are exactly the same as before), but after reboot and flash through TWRP still the same. I tried different GApps Versions like PA Gapps (even the smallest package is too big) and DHO-GApps (could install, but no change), I tried different things like everytime cleaning the Dalvik-Cache before and after and so on, still the same.
I had a little success when I download the Play Services apk manually, but the GApps would crash afterwards. What is the %&$§ing problem?
Thanks for your help!

Thanks for your help, guys! Not.

Do you run out of space with Gapps? Try Slim Zero Gapps (or need to run partition patch).
http://forum.xda-developers.com/slimroms/general/gapps-official-slim-gapps-trds-slimkat-t2792842
http://forum.xda-developers.com/xiaomi-mi-3/general/howto-resize-extend-partition-capacity-t3011918

These probably would have solved that, but I now installed Ivans Lollipop Version and it works like a charm. Thanks for your help anyways!

SMT520 root complete problem installing Gapps

I have got a Samsung Tab Pro 10.1 (SM-T520) have flashed auto root and installed LineageOS 14.1 Nougat Root Custom Rom, however when flashing google apps package through TWRP i get an error 64 Wrong architecture to set-up Open GApps' pre-bundled busybox
but i know i'm use the right package, can anyone help a noob out please?

leerumsey said:
I have got a Samsung Tab Pro 10.1 (SM-T520) have flashed auto root and installed LineageOS 14.1 Nougat Root Custom Rom, however when flashing google apps package through TWRP i get an error 64 Wrong architecture to set-up Open GApps' pre-bundled busybox
but i know i'm use the right package, can anyone help a noob out please?
Click to expand...
Click to collapse
What gapps package are you using? Can I get a link?
If you're downloading from the opengapps site, are you selecting "ARM" in the options? Or are you selecting ARM64?
That error means that the gapps package was made for a device with different hardware/CPU architecture.
You should be using gapps for ARM(non-ARM64) devices.
Sent from my LGL84VL using Tapatalk

Droidriven said:
What gapps package are you using? Can I get a link?
If you're downloading from the opengapps site, are you selecting "ARM" in the options? Or are you selecting ARM64?
That error means that the gapps package was made for a device with different hardware/CPU architecture.
You should be using gapps for ARM(non-ARM64) devices.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
Thanks this seemed to work,
however started the whole process over, while recovering my SD card was corrupt so unable to recover, i flashed a stock ROM (Kitkat) now when installing Lineage after flashing Autoroot and TWRP , I get to boot up screen and there is an error message (google services framework has stopped/google services framework keeps stopping)

[ROM][ANDROID 10.0.0] Nexus ROM [2020-08-05]

NexusROM For Nexus 5X
What’s this?
This was personal project for my Nexus 5X, I've decided to make it public and give to those who wants a new life for his Nexus 5X.
What’s working:
Wi-Fi
RIL
Mobile Data
Camera
Flashlight
Bluetooth
NFC
Fingerprint Reader
Gestures
Sound / Vibration
Hotspot
Video playback
GPS/AGPS
Encryption
Headphones/Headset in voice call
SELinux Enforcing
Almost Stock kernel.
F2FS Supported on data and cache.
Bugs:
None
​
- INSTALLATION INSTRUCTIONS:
- wipe/factory reset and flash rom + gapps.
Google Camera HDR+ crashes:
-copy the attached file to /system/etc/permissions and reboot
[*]Download:
There are 2 versions:
Normal version: AOSP
-2.1-M208
Gapps version*:
-2.1-M208-Gapps
*Do not install Gapps.
https://androidfilehost.com/?w=profile&uid=889764386195930146
if u like my work , you can support me:
Support me!
Contact
Telegram Channel
Sources
device tree: soon.
kernel sources: https://github.com/svlog/kernel_lge_bullhead
- Thanks
Lot of devs:
Lineage OS.
Nitrogen-project.
AOSP Extended.
OmniRom.
AOSiP.
Havoc-OS.
Pixel-Experience
Original rom icon by @xyyx from nitrogen.
And of course, cant forget to @Josh for all his help with logs and crashes. Thanks!

V 2.1-M208: 05-08-2020
Changelog:
-Updated to Android 10 August patch android-10.0.0_r41
V 2.1-M207: 10-07-2020
Changelog:
-Updated to Android 10 July patch android-10.0.0_r40
V 2.1-M206: 05-06-2020
Changelog:
-Updated to Android 10 June patch android-10.0.0_r37
V 2.1-M205: 05-05-2020
Changelog:
-Updated to Android 10 May patch android-10.0.0_r36
V 2.1-M204: 07-04-2020
Changelog:
-Updated to Android 10 April patch android-10.0.0_r33
bullhead:
Updated power hal. System should be now more lighter and responsive
Tweaks for RAM settings.
V 2.1-M203: 11-03-2020
Changelog:
-Updated to Android 10 March patch android-10.0.0_r32
-Fixed QS Settings icon
V 2.1-M202: 04-03-2020
Changelog:
-Updated to Android 10 Feb patch android-10.0.0_r26.
V 2.1-M201: 07-01-2020
Changelog:
-Updated to Android 10 Jan patch android-10.0.0_r25.
- added: Allow to quickly open Running Services from QS panel.
Bullhead:
-Added sepolicy charger to fix offline charging(battery animation).
-Added some general/memory tweaks.
-Fixed "Ok google" voice command.
-Updated Google FI
V 2.0-M12: 05-12-2019
Updated to Dec Patch android-10.0.0_r15
Added Music Visualizer.

Thanks for the share, just booting it up now! Will drop back in once it's finished restoring..
Looks good, all up and running with micro gapps installed, restored from Google back up without fault. Other than the animations running at double time everything else seems to be on point, thanks again ?

Android Setup keeps stopping...

TRIPLEFIRST said:
Android Setup keeps stopping...
Click to expand...
Click to collapse
Describe what you wipe and installing process?!

Encryption is working?
While encrypting the phone, it restarts and then struck on "Google" screen

Josh said:
Describe what you wipe and installing process?!
Click to expand...
Click to collapse
Just wipe/factory reset and flash rom as instruction.
Any rom has had that kind of crash before...

Rahulmsinghvi said:
While encrypting the phone, it restarts and then struck on "Google" screen
Click to expand...
Click to collapse
You should wait a bit in that screen.... the encryption is not instant. If you wanna encrypt. Wipe all, flash rom and let boot, then encrypt without install apps, much faster.

This Rom is so fast Thanx for sharing :*

Encryption
equlog said:
You should wait a bit in that screen.... the encryption is not instant. If you wanna encrypt. Wipe all, flash rom and let boot, then encrypt without install apps, much faster.
Click to expand...
Click to collapse
I will try that. Generally it should show the option of encryption while setup itself.. Any idea why it's not showing?
BTW the ROM is super cool. It is definitely a daily driver

Rahulmsinghvi said:
I will try that. Generally it should show the option of encryption while setup itself.. Any idea why it's not showing?
BTW the ROM is super cool. It is definitely a daily driver
Click to expand...
Click to collapse
I can't answer you, I dont have encrypted my phones. Maybe someone can answer you, I uploaded an encrypted build by default, wipe all and flash.

TRIPLEFIRST said:
Just wipe/factory reset and flash rom as instruction.
Any rom has had that kind of crash before...
Click to expand...
Click to collapse
Try wipe everything except internal storage and let flash just ROM and let it boot then reboot recovery and flash gapps and Magisk if you want root . If it happens again maybe you should try format data flash ROM and let first ROM boot than reboot recovery and flash gapps , Magisk if you want root. BUT FIRST TRANSFER IMPORTANT FILES IN PC AS YOU FORMATED DATA YOU WILL LOST ALL FILES. One of those methods should work.

Josh said:
Describe what you wipe and installing process?!
Click to expand...
Click to collapse
Hello,
Android Setup keeps stopping... me too
I authorized all but always crash
and detection ok google don't work for me (French lol)

laugeek57 said:
Hello,
Android Setup keeps stopping... me too
I authorized all but always crash
and detection ok google don't work for me (French lol)
Click to expand...
Click to collapse
Read post above

Josh said:
Read post above
Click to expand...
Click to collapse
Sorry bro I tested many install always crash
open gapps micro 10 cause this ?

laugeek57 said:
Sorry bro I tested many install always crash
open gapps micro 10 cause this ?
Click to expand...
Click to collapse
Try nano open gapps or pico even Bitgapps works good for me. There is no problem for flashing and crashing if you follow instructions of OP.
Here is the Telegram chat where you can see more info about ROM and Gapps. Join «NexusROM For Bullhead» on Telegram: https://t.me/NexusROM

Josh said:
Try nano open gapps or pico even Bitgapps works good for me. There is no problem for flashing and crashing if you follow instructions of OP.
Here is the Telegram chat where you can see more info about ROM and Gapps. Join «NexusROM For Bullhead» on Telegram: https://t.me/NexusROM
Click to expand...
Click to collapse
Thanks bro
I test with others gapps
Good options on this Rom

laugeek57 said:
Sorry bro I tested many install always crash
open gapps micro 10 cause this ?
Click to expand...
Click to collapse
Did you actually Format data, as recommended in OP? TWRP>wipe>Format data>Type yes>confirm>flash ROM+gapps. Even PixelGapps from Telegram group work.

I don't get it lol... Flashed the encrypted version and on boot the phone asked for password. Didn't had one. So I formatted data partition and flashed again. Now it boots fine but if i want to flash gapps there is no setup or any other gapps installed on reboot. Did I miss something here? Sorry it was a long time ago flashing on my N5X.
Gesendet von meinem Pixel 3 XL mit Tapatalk

laugeek57 said:
Thanks bro
I test with others gapps
Good options on this Rom
Click to expand...
Click to collapse
You can hit thanks bottom lol
---------- Post added at 07:09 PM ---------- Previous post was at 07:05 PM ----------
Komodoketavaran said:
I don't get it lol... Flashed the encrypted version and on boot the phone asked for password. Didn't had one. So I formatted data partition and flashed again. Now it boots fine but if i want to flash gapps there is no setup or any other gapps installed on reboot. Did I miss something here? Sorry it was a long time ago flashing on my N5X.
Gesendet von meinem Pixel 3 XL mit Tapatalk
Click to expand...
Click to collapse
With Bitgapps you can flash with or without setup. There is two versions of Bitgapps. See thread.
For opengapps should be setup wizard to log in to Google.
Try first flash ROM boot it and reboot to recovery then flash gapps you want.

Can't get Gapps to work on Nexus 5, with Lineage 14.1

I have a Nexus 5 phone that I would like to have Lineage (lineage-14.1-20190126-nightly-hammerhead-signed.zip) and Gaps (open_gapps-arm-7.1-nano-20220215.zip) installed so that I can use the playstore as needed.
I have tried to follow the instructions on the lineage website to the letter. I wipe, then install lineage, then (before rebooting) I install gapps. That's where I get the error 70 message that there is not enough room on the system partition for gapps to install. I've selected the nano version of gapps (smallest), and I have over 12G of internal storage free.
I've tried this several times, and I always hit the Error 70 when I try to install gapps.
I'd like to get gapps to work, but I would settle for finding some way to sideload or otherwise load Google Play store. I tried installing it as an apk, but apparently it has dependencies (unknown) so I couldn't get it to work - standalone.
Do I have to format the system partition? Resize the partition? Something else?
I hope there is a simple answer to this. All I really want for Xmas, is to get Lineage with playstore working.
Thanks in advance for assistance.

Nano isn't the smallest Gapps package; pico is. Try that, and see if it works.
Side note: The ROM you' re using seems old... If you want to use LOS 14.1, why don't you have a look at the unofficial builds by @razorloves. He has done great work by providing new builds from time to time, with more recent security patches, even though LOS 14.1 is no longer maintained.

Answer is use a gapps.config.txt file to control what gapps get loaded. Worked for me. Case closed!