I am using terenceng's [ROM] CM-11.0 | Android 4.4.2 KitKat | Galaxy Tab 7" [Dec 12A/B, 2013] Dec. 12 B ROM (CM11/Android 4.2.2), and I am having problems installing and using Gapps. I have tried every version from the PA Gapps to the official CM Gapps from the wiki. All of them install just fine, however the apps FC, and setting up a Google account ends with it saying there was an error communicating with the servers.
Any help getting Gapps to work? I would like at least the Play Store so I could manually install the others.
Thanks!
furmada said:
I am using terenceng's [ROM] CM-11.0 | Android 4.4.2 KitKat | Galaxy Tab 7" [Dec 12A/B, 2013] Dec. 12 B ROM (CM11/Android 4.2.2), and I am having problems installing and using Gapps. I have tried every version from the PA Gapps to the official CM Gapps from the wiki. All of them install just fine, however the apps FC, and setting up a Google account ends with it saying there was an error communicating with the servers.
Any help getting Gapps to work? I would like at least the Play Store so I could manually install the others.
Thanks!
Click to expand...
Click to collapse
Are you running ART? If yes, have you resized your cache partition?
The PAGapps package in its native form is too large for the SGT7. Have you tried BaNkS 11-26_GApps_Core_4.4_signed? Never experienced a problem with this one on the latest ROMs from terenceng or storm31.
Will try the BaNkS Gapps
ulev said:
Are you running ART? If yes, have you resized your cache partition?
The PAGapps package in its native form is too large for the SGT7. Have you tried BaNkS 11-26_GApps_Core_4.4_signed? Never experienced a problem with this one on the latest ROMs from terenceng or storm31.
Click to expand...
Click to collapse
I am not running ART. I will try the Gapps you listed and see if they work.
Edit: They do not work. process com.google.process.gapps stops each time I go to add a Google account.
furmada said:
I am not running ART. I will try the Gapps you listed and see if they work.
Edit: They do not work. process com.google.process.gapps stops each time I go to add a Google account.
Click to expand...
Click to collapse
I suppose you should start over again and make sure this time you factory reset (wipe /cache, /dalvik and /data) and wipe the /system partition too just to be safe before you flash the ROM again. Then install the core Gapps again. I haven't seen dirty flashes work with any of these early 4.4.2 ROMs yet. You can use the latest ROM of course which is now 12-16 and offers the easy conversion to ART without a need to repartition ever. This seems to become the new thing...
Will try the new ROM
ulev said:
I suppose you should start over again and make sure this time you factory reset (wipe /cache, /dalvik and /data) and wipe the /system partition too just to be safe before you flash the ROM again. Then install the core Gapps again. I haven't seen dirty flashes work with any of these early 4.4.2 ROMs yet. You can use the latest ROM of course which is now 12-16 and offers the easy conversion to ART without a need to repartition ever. This seems to become the new thing...
Click to expand...
Click to collapse
I always wipe everything before flashing, especially if I have problems. I will try the newest ROM and let you know how it works out.
ulev said:
Are you running ART? If yes, have you resized your cache partition?
The PAGapps package in its native form is too large for the SGT7. Have you tried BaNkS 11-26_GApps_Core_4.4_signed? Never experienced a problem with this one on the latest ROMs from terenceng or storm31.
Click to expand...
Click to collapse
Where can I download this package from; cant seem to find it anywhere.
Just google it. GApps core 4.4.2. a link will come up to xda.
Sent from my SCH-I800 using xda app-developers app
Related
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors of these cell phones.
Installation:
You need to have installed Clockworkmod recovery!
Boot into recovery by pressing Call+Volume Up+Power.
After that install the ROM from the SD card using ClockworkMod Recovery!
+If you want Google apps then install this: http://goo.im/gapps/gapps-ics-20120429-signed.zip
About Me: I have been cooking ROMs since 2011 and my first developed ROMs for Huawei U8500 were CyanogenMod ROMs.
Known issues*
1. OpenMax
2. FM Radio
3. Camera (video recording)
Changes
CyanogenMod 9.0.0 Nightly 2012.06.18
Updated CyanogenMod source!
Added tweaks!
Fixed D-Pad!
CyanogenMod 9.0.0 Nightly 2012.06.13
Updated CyanogenMod source
A lot of bug fixes
CyanogenMod 9
Initial release
Current release
CyanogenMod 9.0.0 Nightly 2012.06.18
Previous releases
CyanogenMod 9.0.0 Nightly 2012.06.13
CyanogenMod 9
Ask me if you need to!
Market
And one of the bugs is Market get's error
gapps
Plz give me working gapps link
Thanks for your development
mohithimu said:
Plz give me working gapps link
Thanks for your development
Click to expand...
Click to collapse
Install the Rom, then wipe data and cache... and market will work...
2 bugs still exist:
- no keylock (I installed Ripplelock)
- no gallery
gyilki said:
Install the Rom, then wipe data and cache... and market will work...
2 bugs still exist:
- no keylock (I installed Ripplelock)
- no gallery
Click to expand...
Click to collapse
on my phone after wipe market is still don't working :\ what gaaps you are using? if you can share link
question: can you turn off the trackpad mouse pointer, to work as 2.3.7
galery not working properly
otherwise a good rom, I like it
Pointer remover!
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Update Not working so you need to put those files in /system folder by yourself!
Pointer will be fixed in next update!
Can't impossible get Gapps to work. Have tried evrything (I think)!
Have tried a couple other Gapps then latest one given in this thread.
Have tried installing CM9 and Gapps a couple of times, with reboot and cleaning cache etc in diffrent orders... without luck.
Latest I tried clearing cache, data, dalvik, etc.
Installed CM9.
Installed Gapps (given above in thread)
Reboot.
Evrything seems to work, but no icons/apps appear... >_<
klavsanson said:
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Install it from ClockworkMod recovery!
Click to expand...
Click to collapse
not working:-(
great job
klavsanson said:
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Click to expand...
Click to collapse
thanks, its work for me!!
when i want install new release recovery show me that installation aborted
Now I've done some more testing... and done the installation over and over a couple of times
Theese are my conclusions:
* Installation of Gapps is partially working!
From one installation to another, diffrent apps and function is installed (or working) on the phone.
Theese functions I've found (so far) that vary from time to time:
* Gmail
* Market
* Screen lock
* Installation guide program when new user/clean installation
tested
After a while I managed to set up it to work good
1.wipe data factory reset, dalvik cache...everything
2.flash rom
3.wait for the phone to start
4.wipe again,start the phone
5.flash gpapps
Instead of stock gallery use quick pick.
Little bit slow when entering menu (probably becouse of stock zoom effect).
market working,camera working, synced account without problems
Great job!
I installed CyanogenMod 9.0.0 Nightly 2012.06.18
My phone just flies.
Battery lasts a long time
RAM size 140 MB (it is very good)
Less:
*1.The graphics system sometimes produces errors
*2.File Manager does not play music
Otherwise, I like ...
i instaled this rom, and i am very satisfied, i like it very much, i want to use it as my prime rom, but, i have problem, landscape mod dosent work, nor in messages nor in menu. atlist in messages i must have landscape mod. can u fox this???
sory for my bad english
FIX!
Zbajchou said:
when i want install new release recovery show me that installation aborted
Click to expand...
Click to collapse
pedjakis said:
i instaled this rom, and i am very satisfied, i like it very much, i want to use it as my prime rom, but, i have problem, landscape mod dosent work, nor in messages nor in menu. atlist in messages i must have landscape mod. can u fox this???
sory for my bad english
Click to expand...
Click to collapse
Zbajchou, I have fixed the update so download it again!
pedjakis, install Attached File!
How could we install google talk on this rom?
Graphics bug.Dunno what to do.Very annoying.
EDIT:Factory reset helped. Very happy now.Awesome ROM!
EDIT2:No sound when sms comes.Is there any fix?
Great Job!
Hi Klavsanson,
I've installed the latest version and It's working almost everything, great
I don't know if it's my phone, but I can't neither use USB nor wifi tethering. This is important for my job.
I've previously wiped data, cache, dalvik
Gallery has an extrange behaviour as is not possible to see correctly anything-
Thanks for your job
Just out of curiosity
how come that gapps are so massive in size 80mb ?compared to cm7 only 9mb
I'm thinking about installing CM10, but I have a couple of quick questions:
Does the latest build still have over clocking leading to "burnt NANDs"?
Which gapps zip do I need to install? Super stripped? (What if I install mounts2SD, can I get full gapps then?)
Have the force closes in the camera been fixed now?
Will mounts2SD work with CM10, allowing me to install as many apps as I want? And has anyone tried installing it with the Play Store app?
Thanks for any help.
SifJar said:
I'm thinking about installing CM10, but I have a couple of quick questions:
Does the latest build still have over clocking leading to "burnt NANDs"?
Which gapps zip do I need to install? Super stripped? (What if I install mounts2SD, can I get full gapps then?)
Have the force closes in the camera been fixed now?
Will mounts2SD work with CM10, allowing me to install as many apps as I want? And has anyone tried installing it with the Play Store app?
Thanks for any help.
Click to expand...
Click to collapse
Hi ya
How are you doing??
1. If you Flash with latest kernel ,which is not overclocked, it'll not probably produce burnt nand.
2.super stripped only
3. Full gapps is a total junk ~ they go to /system ~you can symlink them to app ~system in mount2SD. Big work
4. Camera AFAIK is totally unstable ~at least for me.. some say it's better etc. As always third party cams work fine (you can read my signature link to know more)
5. Ya.. it'll work. Mount2SD will let you install as many as you want as per size of SD ext ~however kernel 3 has problems mounting SD ext ~some partition types ~but once it works, it'll work for ever until you change recovery or change partitions
6. I am using the play store version. Working fine for me. I would've recommended play version for your stock Rom as well, if they released mount2SD @ that time
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it
Awesome, thanks for your help. Here's hoping I manage not to completely mess up my phone haha.
u cn use the signed GAPSS, if you prefer....
You unzip the Stripped version, and the Signed GAPPS....
Copy everything from the SIGNED GAAPS that are ALREADY present in Stripped version... rest throw in trash..
RE-ZIP.... you got a SIGNED STRIPPED GAPPS...
SifJar said:
I'm thinking about installing CM10, but I have a couple of quick questions:
Does the latest build still have over clocking leading to "burnt NANDs"?
Which gapps zip do I need to install? Super stripped? (What if I install mounts2SD, can I get full gapps then?)
Have the force closes in the camera been fixed now?
Will mounts2SD work with CM10, allowing me to install as many apps as I want? And has anyone tried installing it with the Play Store app?
Thanks for any help.
Click to expand...
Click to collapse
USE the STRIPPED VERSION OF GAPPS!
INSTEAD of m2sd,use INT2EXT!! IT manages your data more efficiently!!
AND THE LATES cm10 beta#6 (oc 800Mhz) doesn't burn your NAND!! I TOO AM USING IT!!
From today Nook HD+ is officially supported by Cyanogenmod.
you can download Files here:
http://download.cyanogenmod.com/?device=ovation
The matching GApps are here:
http://goo.im/gapps
Bad luck, it seems that Kindle app is not working. It is closing right after start.
Can someone confirm this. I did a clean install.
starbright_ said:
From today Nook HD+ is officially supported by Cyanogenmod.
you can download Files here:
http://download.cyanogenmod.com/?device=ovation
The matching GApps are here:
http://goo.im/gapps
Click to expand...
Click to collapse
Why are you starting a whole new thread when the logical step would be for the original to just switch over?
Sent from my HTC Sensation using Tapatalk 4
starbright_ said:
Bad luck, it seems that Kindle app is not working. It is closing right after start.
Can someone confirm this. I did a clean install.
Click to expand...
Click to collapse
I see the same issue. I also see fix permissions finishing immediately, presumably because it's running against the wrong directory or file system. Otherwise it's running quite well for me!
bxlegend said:
Why are you starting a whole new thread when the logical step would be for the original to just switch over?
Sent from my HTC Sensation using Tapatalk 4
Click to expand...
Click to collapse
Havn't Seen a thread handling emmc 10.2. Would you mix it with 10.1?
starbright_ said:
Havn't Seen a thread handling emmc 10.2. Would you mix it with 10.1?
Click to expand...
Click to collapse
The Ovation is only on nightly status and has not received a stable build. Now that it has moved on to 10.2 nightly builds any reports submitted for a 10.1 build is now mute.
Sent from my HTC Sensation using Tapatalk 4
SCWells72 said:
I see the same issue. I also see fix permissions finishing immediately, presumably because it's running against the wrong directory or file system. Otherwise it's running quite well for me!
Click to expand...
Click to collapse
Is fixing permissions still required? What is this exactly?
I just did a full whipe and install from zip, cleaned also dalvik cache.
starbright_ said:
Is fixing permissions still required? What is this exactly?
I just did a full whipe and install from zip, cleaned also dalvik cache.
Click to expand...
Click to collapse
I would assume any time you have things running as root that manipulate files, you can end up with things in the file system that aren't accessible to less privileged processes and therefore cause them to FC. I don't see why 4.3 would eliminate the need for that, but I could very well be wrong.
starbright_ said:
Bad luck, it seems that Kindle app is not working. It is closing right after start.
Can someone confirm this. I did a clean install.
Click to expand...
Click to collapse
Yes, I have this issue and I am attaching the logcat.
Logcat snippet:
Code:
...
E/KindleReaderJNIWrapper( 5772): amz_mapped_dlopen failed
E/KindleReaderJNIWrapper( 5772): Cannot load library: alloc_mem_region[905]: OOPS: 5772 cannot map library 'libexpatKRF.so'. no vspace available.
E/KindleReaderJNIWrapper( 5772): Failed to load libraries from apk
D/dalvikvm( 406): GC_CONCURRENT freed 2977K, 43% free 12856K/22428K, paused 2ms+15ms, total 107ms
...
Can this be a dirty flash without losing my setup?
Sent from my BN NookHD+ using Tapatalk 2
I was using cm-10.1-20130812-NIGHTLY-ovation.zip for 24 hours without problems... but updated to CM 10.2 via cm-10.2-20130814-NIGHTLY-ovation.zip .. and problems.
1. In recovery installed cm-10.2-20130814-NIGHTLY-ovation.zip
2. booted
3. I then went back into recovery and installed the new Gapps gapps-jb-20130813-signed.zip
4. Booted
5. Went back into recovery and formatted cache and davlik
6. booted
After swipe to desktop... What is failing: Chromecast crashes, Google voice crashes, Google Play Music crashes. Google Play Store will not actually do downloads of updates... it shows a new GMaps and Google Play Music - (newer than the new Gapps) - but refuses to download them, the download instantly fails.
My failing Google Play Store shows Build version: 4.3.11
Even though the Chromecast app crashes, I can still control Chromecast device with the Netflix app.
RoundSparrow said:
I was using cm-10.1-20130812-NIGHTLY-ovation.zip for 24 hours without problems... but updated to CM 10.2 via cm-10.2-20130814-NIGHTLY-ovation.zip .. and problems.
1. In recovery installed cm-10.2-20130814-NIGHTLY-ovation.zip
2. booted
3. I then went back into recovery and installed the new Gapps gapps-jb-20130813-signed.zip
4. Booted
5. Went back into recovery and formatted cache and davlik
6. booted
After swipe to desktop... What is failing: Chromecast crashes, Google voice crashes, Google Play Music crashes. Google Play Store will not actually do downloads of updates... it shows a new GMaps and Google Play Music - (newer than the new Gapps) - but refuses to download them, the download instantly fails.
My failing Google Play Store shows Build version: 4.3.11
Even though the Chromecast app crashes, I can still control Chromecast device with the Netflix app.
Click to expand...
Click to collapse
Took me a bit to figure out that the Google apps that were crashing are not part of the gapps zip package. You should just need to uninstall the offending app(s) and then reinstall via the Play Store and they should work fine. They did for me at least.
Lets continue in the thread here : http://forum.xda-developers.com/showthread.php?t=2389813
THIS THREAD SHOULD BE CLOSED.
Sorry, I have been either not seen it before or the upper one hase been renamed. It doesn't make sense to handle the same version in different threads.
Starbright, this is for the native (as in on the internal sd) version, not the on that runs from an external card, and therefore will have different issues and solutions to said issues.
Sent from my LG-P769 using xda app-developers app
rbraswell8 said:
Starbright, this is for the native (as in on the internal sd) version, not the on that runs from an external card, and therefore will have different issues and solutions to said issues.
Sent from my LG-P769 using xda app-developers app
Click to expand...
Click to collapse
I just repeat a statement of verygreen (which I would like to follow):
The former CM10.2 SDCARD thread is now all in one 10.2 thread. http://forum.xda-developers.com/show...php?p=44220140
CLOSED !
bxlegend said:
The Ovation is only on nightly status and has not received a stable build. Now that it has moved on to 10.2 nightly builds any reports submitted for a 10.1 build is now mute moot.
Sent from my HTC Sensation using Tapatalk 4
Click to expand...
Click to collapse
Fixed
Hi,
I wanted to switch from MIUI to Mokee on my Mi4, because I didn't want to wait for Android L on my device any longer. I installed the newest Mokee Rom via TWRP recovery (also newest version) and after a reboot I flashed the official Mokee GApps. Of course I did a full-wipe and facory reset and everything.
>Everytime the Playstore crashes and under Account Settings, there is no possibilty to add a Google account.<
I know, you have to go and check under Mokee Center and extras. I downloaded the GApps there (which are exactly the same as before), but after reboot and flash through TWRP still the same. I tried different GApps Versions like PA Gapps (even the smallest package is too big) and DHO-GApps (could install, but no change), I tried different things like everytime cleaning the Dalvik-Cache before and after and so on, still the same.
I had a little success when I download the Play Services apk manually, but the GApps would crash afterwards. What is the %&$§ing problem?
Thanks for your help!
Thanks for your help, guys! Not.
Do you run out of space with Gapps? Try Slim Zero Gapps (or need to run partition patch).
http://forum.xda-developers.com/slimroms/general/gapps-official-slim-gapps-trds-slimkat-t2792842
http://forum.xda-developers.com/xiaomi-mi-3/general/howto-resize-extend-partition-capacity-t3011918
These probably would have solved that, but I now installed Ivans Lollipop Version and it works like a charm. Thanks for your help anyways!
I have built opengapps for android 8.0
Arm
aroma
Super
Stock
Full
mini
micro
nano
pico
tvstock
Arm64
aroma
Super
Stock
Full
mini
micro
nano
pico
tvstock
Reserved
Wow!.fo real?.. Leme try it... No probable bugs right?..
HeroForFun said:
Wow!.fo real?.. Leme try it... No probable bugs right?..
Click to expand...
Click to collapse
not sure, i just built it according the the open gapps instructions so there shouldn't be.
collm109 said:
not sure, i just built it according the the open gapps instructions so there shouldn't be.
Click to expand...
Click to collapse
Yeah.. Its okay I guess.. I'm using device z00t and.. Lineageos 15 well.. Google play services seems to .. Force close for some reason.. ? really appreciate your work tho man...
Haven't found any unofficial Oreo gapps that can be dirty flashed, always get many apps force closing. Will try these dirty and clean next ROM build.
Edit: Micro fails setup.
Angler ? AquariOS + OpenGapps + Arise
tcat007 said:
Haven't found any unofficial Oreo gapps that can be dirty flashed, always get many apps force closing. Will try these dirty and clean next ROM build.
Edit: Micro fails setup.
Angler ? AquariOS + OpenGapps + Arise
Click to expand...
Click to collapse
weird, i flashed lineage os then set my oneplus 3 up then flashed stock gapps
Stock arm64 worked for me on 6p, out of thanks, so thanks :good:
Working on InvictaOS 8.0, tested pico package. Thanks for building
Thanks for building, working on AOSP Android 8.0 Orep, OnePlus 5 (after second reboot, manual update Google Play Services and Google Play Store from APKMirror) tested nano package ARM64
Not work gapps stock arm64, for lineage os 15, redmi note 4 mido
rezapratama said:
Not work gapps stock arm64, for lineage os 15, redmi note 4 mido
Click to expand...
Click to collapse
It works but.
You have to dirty flash. I did dirty flash but some apps fc.
looks like all of the gapps uploaded are incorrectly built as you can't flash them and complete setup.
PieOfJustice said:
looks like all of the gapps uploaded are incorrectly built as you can't flash them and complete setup.
Click to expand...
Click to collapse
I flashed arm pico without problems
I am having issues on my Moto G4 Plus where the Gapps package says finished, but the bar at the bottom of TWRP window doesnt fill up and it gets stuck. No Reboot or anything. Tried pico,mini, and stock.
*edit*
also getting Set up wizard closed when i force reboot.
Hi. It remains installed in 98%, and does not advance further.
The file downloaded is not a zip file
I downloaded arm 64 bit stock version
Its showing "can't open file"
And if i see the properties its showing it's a zip file
Can i install it or no ?
JathinReddy said:
The file downloaded is not a zip file
I downloaded arm 64 bit stock version
Its showing "can't open file"
And if i see the properties its showing it's a zip file
Can i install it or no ?
Click to expand...
Click to collapse
just try it, if it is corrupt it wont flash, but it shouldn't be since i used that once myself
collm109 said:
just try it, if it is corrupt it wont flash, but it shouldn't be since i used that once myself
Click to expand...
Click to collapse
Okay
DeviceManagent said:
I am having issues on my Moto G4 Plus where the Gapps package says finished, but the bar at the bottom of TWRP window doesnt fill up and it gets stuck. No Reboot or anything. Tried pico,mini, and stock.
*edit*
also getting Set up wizard closed when i force reboot.
Click to expand...
Click to collapse
I have exactly the same problem with 20170909 gapps.
pico 20170906 from here https://www.androidfilehost.com/?fid=745425885120760217 is working. Setup is starting. But after that i have problems with playstore. I have to clear cache and delete data from all google services to get playstore running. After reboot i have to do the same things again.