Stuck in bootloop after flashing kernel built from openkirins kernel source of android 7.0
Thanks in advance
use the dload method and return to stock buddy.,
in bootloader mode, flash the stock recovery.
Download the firmware for your model.
unzip it.
keep content from unzipped file in SD card under dload folder
power off the phone.
press vol up+ vol down + power button.
it should start flashing the stock ROM.
Related
So I have been trying for a while to install the Resurrection Remix Rom http://forum.xda-developers.com/galaxy-s5/unified-development/rom-resurrection-remix-5-3-4-t3033255 on my SM-900P and am having problems
Android version 5.0
Currently what I have done that worked.
1.) CF-Root of my phone.
2.) backed up all files with titanium backup
3.)used odin to flash TWRP (KTsoonsez_TWRP_04-06-2015.tar.md5)
I am actually following instructions from the [MOAR] rom. http://forum.xda-developers.com/spr...om-v5-0-mod-control-floating-windows-t3016692
after I get a success from odin I try to Unplug & Reboot phone directly into Recovery Mode (press and hold Power + Volume Up buttons) but it simply boots the phone normally.
Idk what I am doing wrong and why I can't get into recovery mode.
Can someone give me some advice or help as to what I need to do?
Trying to flash OA6
So I am currently trying to flash OA6 to see if this will fix the problem.
Update: OA6 fails after a few seconds. not sure what the problem is.
I would try the stock TWRP or the Fusion recovery
http://fusion-rom.net/downloads/
Samsung --> Galaxy S5 --> Recovery
Stock twrp can be flashed through Odin while Fusion's can be flashed through your old recovery.
I can't remember clearly, but I think ktsoonsez doesn't work for LP AOSP roms...
We're you able to figure out how to get into your recovery? If not, on the SM-G900P, you must hold the "Volume Up + Home + Power". The procedure I use:
I press and hold the volume up, the home button and then the power button. I hold all 3 in that order and I watch the top left of the screen until it states "Recovery Booting". Then I let go of all 3 buttons. Hope this helps.
I tried to flash a custom recovery and TWRP , but both are not working by pressing and holding the keystrokes : vol down + power . How else to reinstall a new rom is not ? Now press the power key phone , the phone back bootloop , just press the power + vol dow button to enter the fastboot mode . such as being solfbrick or hard brick ?
you can only install custom recoveries with an unlocked bootloader.
you can access recovery with keys, like you tried, or adb commands, or if you have root download a reboot manager app (easiest solution)
you can restore an device by downloading the firmware you had.
format your sd, place your firmware like this on your sd:
SD:/dload/update.zip or SD:/HwOUC/update.zip
(update.zip can also be update.app if you have android 4.3)
then just reboot, if nothing happens reboot to recovery and select "install zip from sd"
Huawei g6-u10
kuken_91 said:
I tried to flash a custom recovery and TWRP , but both are not working by pressing and holding the keystrokes : vol down + power . How else to reinstall a new rom is not ? Now press the power key phone , the phone back bootloop , just press the power + vol dow button to enter the fastboot mode . such as being solfbrick or hard brick ?
Click to expand...
Click to collapse
I'm also stuck with the same problem
After the update to b820
Issue No. strangely shows
Please solution
issue number
If you want to return to stock after a failed flash please follow these steps:
Download your phone's latest firmware.
After doing this put the UPDATE.APP in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Hi, i need some help
At this time I have the honor totally clean, without any android system. I'm trying to install a rom and when I get to step 3 of the buttons does not work. It is the original logo of honor and not out there.
tks
Try this.
DigiGoon said:
Follow the below steps, and you'll get back to stock:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Click to expand...
Click to collapse
goldfinv said:
Try this.
Click to expand...
Click to collapse
Don`t work
The 3btn still does not work
b4co said:
Don`t work
The 3btn still does not work
Click to expand...
Click to collapse
What do you mean by does not work?
You can not start a forced update or forced update fails?
Is your bootloader unlocked or locked?
What were you using before the problem?
Firmware or custom rom?
Which firmware or if a custom ROM then what was the Android version?
Sent from my PLK-L01 using XDA Labs
I solved the problem in another way
After trying a thousand and one thing, the resolution to my problem was simpler than I thought.
I decided as follows:
- Having no memory card, I bought one and put in tlm
- I drew a full back to my rom, in this case a custom 6.9.1
- I put this full rom (zip file) on the memory card
- Through the TWRP did factory reset through the bootloader option
- Again by TWRP I chose installed the full rom had put the memory card
- He installed, I restart and voilá
Note that after doing this, it took a long time to set everything up. In the second logo of honor it took about 15 or 20 minutes.
It's probably due to hardware, if 3btns method don't work you can't install a fw
b4co said:
I solved the problem in another way
After trying a thousand and one thing, the resolution to my problem was simpler than I thought.
I decided as follows:
- Having no memory card, I bought one and put in tlm
- I drew a full back to my rom, in this case a custom 6.9.1
- I put this full rom (zip file) on the memory card
- Through the TWRP did factory reset through the bootloader option
- Again by TWRP I chose installed the full rom had put the memory card
- He installed, I restart and voilá
Note that after doing this, it took a long time to set everything up. In the second logo of honor it took about 15 or 20 minutes.
Click to expand...
Click to collapse
Glad you found a way to make it work
Sent from my H60-L04 using XDA Labs
i tried to go back to stock i followed the step mentioned here
http://forum.xda-developers.com/honor-8/help/honor-8-rooted-twrp-modaco-rom-unable-t3462039
i was able to flash all files through fastboot mode .
Putting the UPDATE.APP from which extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button . on this step the update reach 5% and giving me an error software install failed "incompatibility with current version
but when i rebooted i have a ROM but have no idea its a custom ROM or stock
what firmaware were you on before reverting back and what firmware were you going back to??
and package might be currupted or may be download would not be a copmlete one,
have a go again by redownloading the package and install it again..
gud luck