Hi guys..hope somebody can help me to get my phone working again..i had lollipop installed and by accident I deleted the internal memory..the only thing what I can is to reboot to recovery twrp..and then on my pc phone shows up..1 cust drive and 1 internal..which is empty..do you have any idea about that? thanks a lot..please help )))
Download the stock rom for your phone model (tl-10) official one, NOT beta version, better directly from Huawei web site.
Extract stock recovery from downloaded file (by using huawei extractor app).
Using ADB commands, flash stock recovery. Then copy stock rom to sdcard and proceede with 3button procedure.
If any of these operations sound new to you, please use "search" button in these forums.
tuddu said:
Download the stock rom for your phone model (tl-10) official one, NOT beta version, better directly from Huawei web site.
Extract stock recovery from downloaded file (by using huawei extractor app).
Using ADB commands, flash stock recovery. Then copy stock rom to sdcard and proceede with 3button procedure.
If any of these operations sound new to you, please use "search" button in these forums.
Click to expand...
Click to collapse
I have downloaded from Huawei web site 120sp04 firmware. I extracted recovery, flashed with adb commands. Copied the stock rom to sd card, and i am not able to force my phone to start update. keeps restarting. is the a special trick for this 3 button procedure? phone should be off, but from bootloader i cannot switch of the phone. Is it possible that the phone doesn't recognize my SD Card? please advise.
Please check, there' s a command trough ADB (I think adb reboot) wich reboot phone.
Then, someone, has been forced to keep the SD card NOT inserted into the phone, waited for reboot and then (after huawei logo I think, but I'm not sure; please check) inserted the SD card.
Then proceede with local update (forced method).
As for the 3button method, simply press and keep pressed volume up+volume down + power on button. All togheter.
Then the phone must boot automatically into recovery and start the procedure itself.
It i clear: stock recovery MUST be already installed !!!
tuddu said:
Please check, there' s a command trough ADB (I think adb reboot) wich reboot phone.
Then, someone, has been forced to keep the SD card NOT inserted into the phone, waited for reboot and then (after huawei logo I think, but I'm not sure; please check) inserted the SD card.
Then proceede with local update (forced method).
As for the 3button method, simply press and keep pressed volume up+volume down + power on button. All togheter.
Then the phone must boot automatically into recovery and start the procedure itself.
It i clear: stock recovery MUST be already installed !!!
Click to expand...
Click to collapse
The only thing what i can do is, to flash recovery and boot from fastboot.zip( http://forum.xda-developers.com/mate-7/help/5-1-to-4-4-2-bootloop-t3132888 ) i guess for L09 version, where i can get to update mode with 3 buttons...all other possibilities are not possible. even if i extract from original firmware recovery and boot images, nothing work..i was going from B125 back to B123 to B128 and B313 when in TWRP i deleted everything. Phone is charging, i can turn it off..OS is missing..is it possible that somebody would make a back up in twrp and i would flash it on my phone? or what version of firmware i should start with? what about sideload? does it help? please advise.
alworth said:
The only thing what i can do is, to flash recovery and boot from fastboot.zip( http://forum.xda-developers.com/mate-7/help/5-1-to-4-4-2-bootloop-t3132888 ) i guess for L09 version, where i can get to update mode with 3 buttons...all other possibilities are not possible. even if i extract from original firmware recovery and boot images, nothing work..i was going from B125 back to B123 to B128 and B313 when in TWRP i deleted everything. Phone is charging, i can turn it off..OS is missing..is it possible that somebody would make a back up in twrp and i would flash it on my phone? or what version of firmware i should start with? what about sideload? does it help? please advise.
Click to expand...
Click to collapse
Hello!
I have similar problems, but i have the L09.
Check if you can mount system. Or if you can wipe system, because i can't
Good luck!
Hi guys,
I accidentally wiped /system from my phone, and now I can't get it back.
I've tried downloading the OS zip from the Huawei site and running it from an SD card like it says, but it just fails.
I've also tried extracting system.img from the file with a tool I found here, but it won't flash with fastboot, it just fails saying it can't load the file. It seems like maybe it's encrypted in some way.
Does anyone have any ideas on what I can do to fix this? Can anyone upload a system.img file I can flash to my device?
Thanks
I did exactly like what you did and I finally found this way to solve the problem, it is simple but need you to foucs :
First of all you should have custom recovery (TWRP) , and of course to have this you should unlock you bootloader.
after you have custom recovery , go to this thread (it is custom rom for P8) , and download the rom , then move it to SD card and put it in P8max.
here is the Thread :
http://forum.xda-developers.com/andr...e-1-0-t3175436
Now try to flash this custom rom via recovery "do full wipe" , and wait until your device work.
Now you are using custom rom for P8 and custom recovery, of course there is many bugs and a lot of restarting but don't worry , keep going :
now download this official rom for P8max :
http://download-c.huawei.com/download/downloadCenter?downloadId=51144&version=120555&siteCode=cn
after you download this file, move "dload" folder to root of your SD card , then insert it in your P8max.
now you can't update this while you have custom recovery , so we slould go back to stock recovery fo P8max , download this stock recovery and flash it via Fastboot .
here is Stock recovery :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
last step , you need to flash stock rom with one of these methods, see what work with you :
Method 1 :
1-cell phone turned off.
2-insert the SD card.
3-while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
Method 2 :
1-put SD card into the phone.
2-press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.
Or
open Updater app, then menu then local update.
PS :
if nothing work with you you shold move "dload" folder to root of you phone memory "not SD card" , and because your phone will keep restarting try to connect it to your PC throw USB to stop restarting , and paste "dload" folder to root of your phone memory like what I said before.
then try one of the two methods above.
now wait until you P8max run with official rom and stock recovery.
hope this help, feel free to ask.
Thank you so much! It worked! It's booted up fine after installing the update from the SD card.
I'm just doing the OTA updates now.
AGoodName said:
Thank you so much! It worked! It's booted up fine after installing the update from the SD card.
I'm just doing the OTA updates now.
Click to expand...
Click to collapse
Great, glad to hear that
??
i7mmodi said:
Great, glad to hear that
Click to expand...
Click to collapse
Hi,
I don't understand why when stock recovery I flash the stock recovery via Fastboot and when it reboots, it stuck at 90% with the message Huawei software installing...
Please Help me what to do
lvpl said:
Hi,
I don't understand why when stock recovery I flash the stock recovery via Fastboot and when it reboots, it stuck at 90% with the message Huawei software installing...
Please Help me what to do
Click to expand...
Click to collapse
Do you have unlocked bootloader !!
and use stock recovery in this thread , don't use from another source .
i7mmodi said:
I did exactly like what you did and I finally found this way to solve the problem, it is simple but need you to foucs :
First of all you should have custom recovery (TWRP) , and of course to have this you should unlock you bootloader.
after you have custom recovery , go to this thread (it is custom rom for P8) , and download the rom , then move it to SD card and put it in P8max.
here is the Thread :
http://forum.xda-developers.com/andr...e-1-0-t3175436
Now try to flash this custom rom via recovery "do full wipe" , and wait until your device work.
Now you are using custom rom for P8 and custom recovery, of course there is many bugs and a lot of restarting but don't worry , keep going :
now download this official rom for P8max :
http://download-c.huawei.com/download/downloadCenter?downloadId=51144&version=120555&siteCode=cn
after you download this file, move "dload" folder to root of your SD card , then insert it in your P8max.
now you can't update this while you have custom recovery , so we slould go back to stock recovery fo P8max , download this stock recovery and flash it via Fastboot .
here is Stock recovery :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
last step , you need to flash stock rom with one of these methods, see what work with you :
Method 1 :
1-cell phone turned off.
2-insert the SD card.
3-while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
Method 2 :
1-put SD card into the phone.
2-press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.
Or
open Updater app, then menu then local update.
PS :
if nothing work with you you shold move "dload" folder to root of you phone memory "not SD card" , and because your phone will keep restarting try to connect it to your PC throw USB to stop restarting , and paste "dload" folder to root of your phone memory like what I said before.
then try one of the two methods above.
now wait until you P8max run with official rom and stock recovery.
hope this help, feel free to ask.
Click to expand...
Click to collapse
hi do u have the p8 custom rom? the link u stated is not working. thks
http://forum.xda-developers.com/android/development/rom-huawei-p8-fromfuture-1-0-t3175436
AGoodName said:
http://forum.xda-developers.com/android/development/rom-huawei-p8-fromfuture-1-0-t3175436
Click to expand...
Click to collapse
thks but my phone still cannot boot after installing.
But after it flashes it should let you run the update from the SD card, just need to reflash stock recovery.
i7mmodi said:
I did exactly like what you did and I finally found this way to solve the problem, it is simple but need you to foucs :
First of all you should have custom recovery (TWRP) , and of course to have this you should unlock you bootloader.
after you have custom recovery , go to this thread (it is custom rom for P8) , and download the rom , then move it to SD card and put it in P8max.
here is the Thread :
http://forum.xda-developers.com/andr...e-1-0-t3175436
Now try to flash this custom rom via recovery "do full wipe" , and wait until your device work.
Now you are using custom rom for P8 and custom recovery, of course there is many bugs and a lot of restarting but don't worry , keep going :
now download this official rom for P8max :
http://download-c.huawei.com/download/downloadCenter?downloadId=51144&version=120555&siteCode=cn
after you download this file, move "dload" folder to root of your SD card , then insert it in your P8max.
now you can't update this while you have custom recovery , so we slould go back to stock recovery fo P8max , download this stock recovery and flash it via Fastboot .
here is Stock recovery :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
last step , you need to flash stock rom with one of these methods, see what work with you :
Method 1 :
1-cell phone turned off.
2-insert the SD card.
3-while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
Method 2 :
1-put SD card into the phone.
2-press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.
Or
open Updater app, then menu then local update.
PS :
if nothing work with you you shold move "dload" folder to root of you phone memory "not SD card" , and because your phone will keep restarting try to connect it to your PC throw USB to stop restarting , and paste "dload" folder to root of your phone memory like what I said before.
then try one of the two methods above.
now wait until you P8max run with official rom and stock recovery.
hope this help, feel free to ask.
Click to expand...
Click to collapse
how could the p8 rom work with our p8 max?
so this mean that i can flash this rom ?
Flash official recovery. Download official b021 ROM. Create "dload" folder in your SD card. Extract b021 and put into dload folder. Press volume up+ down button. System will auto install and reboot.
Good luck
william1974 said:
thks but my phone still cannot boot after installing.
Click to expand...
Click to collapse
because there is an update , you should redownload the official rom "V100R001C233B023" , they update it already .
so simply , these are steps :
1- download the official rom from here :
http://download-c.huawei.com/download/downloadCenter?downloadId=53426&version=166267&siteCode=cn
2- download stock recovery from here :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
3- unzip official rom and put "dload" folder in root of Sd card then put it in P8max.
4- keep pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
now you should boot with official rom.
Not working
i7mmodi said:
because there is an update , you should redownload the official rom "V100R001C233B023" , they update it already .
so simply , these are steps :
1- download the official rom from here :
http://download-c.huawei.com/download/downloadCenter?downloadId=53426&version=166267&siteCode=cn
2- download stock recovery from here :
https://www.dropbox.com/s/smv6aoi7p4iivfq/Recovery.img?dl=0
3- unzip official rom and put "dload" folder in root of Sd card then put it in P8max.
4- keep pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade.
now you should boot with official rom.
Click to expand...
Click to collapse
I performed all tasks but says rom is corrupt
Can you please upload stock recovery as link not working anymore.
Bumping for link update too please
qoozy said:
Bumping for link update too please
Click to expand...
Click to collapse
Stock Recovery is in P8Max Root Thread.
Hirs_E_Fruit said:
Stock Recovery is in P8Max Root Thread.
Click to expand...
Click to collapse
I followed these steps, but do i have to install B029 stock now?
cause it always says that software is incompatible with current version??
Hi guys
the link for stock recovery has been expired
anyone can upload it for me?
I found a guide to downgrade my honor h60 l02 and it said to replace the recovery and system with the stock ones from SYSTEM.img and RECOVERY.img in official roms (through fastboot) and I got those files from version b535 using huawei extractor. After flashing those 2 I couldn't start the 3 button format procedure to update with the b535 rom in the dload folder on my sdcard. So I searched for an unbrick procedure and found one on multitool honor 6 xda page. I flashed the boot,cust,system,recovery from b535 with multitool unbrick procedure and still couldn't get in the emui installation screen by pressing vol+vol-power. I tried reformatting sdcard to fat 32 and put again dload folder with update.app inside. I even tried to press the 3 buttons with card partially introduced but still can't start the update procedure. Used another microsd card but no starting. I finally tried to install a custom recovery but only got to install twrp 2.8.70 v2 for emui 4.0 . Before the whole BIG problem I think I had rom with 6.1.19 version which actually had problems with the bluetooth not starting and that was the reason I wanted to downgrade. I also tried to install 2 custom roms for h60 l02 but I got error on zip installation which seems weird considering at list that should work if I can't use the update procedure. I could probablly use fastboot to install all images required for rom but I can't find a scatter file info or a partition guide anywhere for h60 l02 because I cant install any zip from twrp recovery except gapps.
Any help is welcomed! I'll buy you a bear if u can help me !
Problem solved
So I finally got to fix the phone. I found out that the phone was updated to a Marshmallow rom in the beta stage by my friend who gave it to me. The rom was identified succesfully after some searches on 4pda.ru forums where a couple of russians are experimenting how to put android 6 on honor 6 devices. The version was 5.12.31_beta which in device id I think it apears as h60-C00b690sp01. I put the stock recovery and boot from that image with fastboot on phone. Wanted to put also system and cust images but the rom is an update zip which has mixt type of data (system, cust and a few other partition datas are directly in the zip with meta and inf datas while boot,recovery and a few other partition datas are inside the update.app in the zip). Luckilly for me after the boot and recovery flash I could start stock recovery with vol+power button press and also could finally start force update procedure with vol+vol-power buttons pressed (keep in mind that from fastboot I pressed the 3 buttons continuoselly while the phone restarted , went to a honor logo display, after about 5 seconds it restarted and started emui installation screen; for some reason even from powered off state the device needed to go to the honor screen before on the restart to emui installation screen and Ive seen videos where the devices just go straight to emui installation screen). I got a downgrade package from 4pda.ru forums and tried to install it with forced update procedure but it got stuck at 5%. After 1 more day I figured out that I need to pull the usb cable out before the emui installation screen because it would show a usb connected icon on screen instead of showing emui installation icon (I thought at first that thats how it should look for marshmallow stock roms xD) and Im thinking that if u keep usb cable plugged in it tries to get flash image from usb and if that is unplugged it tries to get image from sdcard dload folder. So I flashed the downgrade version and after restart to honor logo screen I restarted device to fastboot mode with ofc vol-power buttons pressed and pulled the sdcard out. I replaced downgrade package (update. app from H60-LX2_EMUI4.0_2_EMUI3.1 dload) with the dload folder of the b535 stable rom (H60-L02-L12_EMUI3.1_Android5.1_C00B535 rom) on the sdcard. I restarted device and used again 3 button update without usb plugged in xD and it installed all the way. After 100% installation the device rebooted and after showing a big „w” it got to pulsating honor logo screen and after about 10 minutes it showed me language menu for language selection. And the desperation saga ended xD. Happy ending!!!
Hi guys!
Yesterday i unlocked my bootloader and i installed TWRP. Im on the beta version emui 5 and android 7.0. when i tried to install the SUuser somthing happend and my android system and emui files disappeared. The phone did not boot anymore. So i tried to enter bootloader and use HiSuit to factory reinstall the OS but i got an error message saying "this device is not supported".
Then i tried to download the stock firmware to my phone and placed it on the external sd card and tried to flash it with TWRP i'v got some error message saying some thing with "/data" atleast i'v got some success the system booted up but i'm missing a the emui keyboard and som of the factory apps and drivers.
I have also tried holding the power up button for 3sec but still an error message saing "Getting package info failed"
Please help me get my phone back
Lucas Napik said:
Hi guys!
Yesterday i unlocked my bootloader and i installed TWRP. Im on the beta version emui 5 and android 7.0. when i tried to install the SUuser somthing happend and my android system and emui files disappeared. The phone did not boot anymore. So i tried to enter bootloader and use HiSuit to factory reinstall the OS but i got an error message saying "this device is not supported".
Then i tried to download the stock firmware to my phone and placed it on the external sd card and tried to flash it with TWRP i'v got some error message saying some thing with "/data" atleast i'v got some success the system booted up but i'm missing a the emui keyboard and som of the factory apps and drivers.
I have also tried holding the power up button for sec but still an error message saing "Getting package info failed"
Please help me get my phone back
Click to expand...
Click to collapse
First, i have no ideea if this will work for you but this is what i done when my P8 Lite was f**ked up.
Download the rom what you want, a stock one, sure, and use Huawei Extractor to extract the cust.img system.img recovery.img and boot.img from update.app, after that flash through bootloader.
P.S. I'm saying again, i have no ideea if this will work for this phone but it should.
Or maybe you can try flashing only the recovery.img through bootloader,copy update.app in dload folder on SD Card and do a force update.
I hope this will help you,let me know :good:
download this file
extract it .
get update.app out .
make new a folder
name it dload
put update.app inside
copy the dload folder to ur SD
power off .
press 3 buttons ( volume+ and volume - and power 3~5 seconds . will start upgrading
ur phone will come back to life .
u can also come back here if didin't success !
Romiui said:
download this file
extract it .
get update.app out .
make new a folder
name it dload
put update.app inside
copy the dload folder to ur SD
power off .
press 3 buttons ( volume+ and volume - and power 3~5 seconds . will start upgrading
ur phone will come back to life .
u can also come back here if didin't success !
Click to expand...
Click to collapse
I used the dload method but I'm stuck on the start up logo.
ThePandaGuy said:
I used the dload method but I'm stuck on the start up logo.
Click to expand...
Click to collapse
Did you find any solution?