...when the screen is on? It's quite annoying to search the keys in dark.
i absolutely agree..........m also searching for such tweak.
intresting tweak !....i'm hope someone could solve !
what would be even better is to use the ambient sensor to turn on the backlight whenever the phone is picked up (using the accelerometer)
Yes this annoys me too is really hard to see the keys in the dark more so when the screen is lit up!
here4info said:
what would be even better is to use the ambient sensor to turn on the backlight whenever the phone is picked up (using the accelerometer)
Click to expand...
Click to collapse
It's a good idea, but a little complicated...
Anything using motion just wouldn't be the best, since a lot of people put unit into a pocket, bag etc. Which is means the HD2 is usually moving as a result of walking etc. You might get away with sensing VERTICAL movement, but that is assuming the accelerometer can detect VERTICAL movement and it potentialy could be triggerd by normal movement in a pocket, bag etc. as well.
You might be able to use the proximity sensor with the accelerometer to do this. It wouldn't be perfect, but may work enough for most.
The simplest thing would be to enable the backlight to automaticaly stay 'on' when the device is activated (I don't need light to do this). Add to this a time feature that says only activate if after 6:00pm and before 6:00am. This means it wouldn't activate during daylight, unless you told it too. You would also need to add the feature to 'always' activate as some like to keep it simple or routinely visit dark places.
perhaps get it to light up when input is detected on the capacitive touch screen. that way it wouldn't get activated in a pocket or case. haven't a clue how to implement it but hey.
I really don't see an issue with wanting the keys lit when the screen's on. That sounds like a perfect solution to me. I think using sensors is overkill.
Interested in this tweak too...
Or use (light + proximity) sensor.
so no ideas then huh? i will have a root around through the registry settings to see if there is anything we can use for this..
i will have a root around the registry see if there is anything we can use
waaaaaaay too many "over complicated" solutions to this prob in this thread regarding using sensors etc ... you basically just need to stop the lights from sleeping while the phone is unlocked and on ! so if the screen back light is on the buttons should be too !!!!!!!!
yea thats what i was going to look for...
i.e. if screen is on.. turn the buttons on!!!
bump ! bump bump !
hahahah i was about to do the same
bump! it's a must !
bump from me too!
I am sure this could be done by a small registry change...but the mystery is as to which registry entry to look at!
Found a way to do this programmetically, I'll make a small test app for this tonight. Check back in like 8-9 hours, my boss won't like it if I do it during work time
NetRipper said:
Found a way to do this programmetically, I'll make a small test app for this tonight. Check back in like 8-9 hours, my boss won't like it if I do it during work time
Click to expand...
Click to collapse
What is it you've found? Is there a dll that can control the button lights?
So apparently on Samsungs official news site , the AOD display has a sensor that will disable the AOD when it's placed inside a pocket or a bag (Why would your watch be in your pocket or bag instead of your wrist?). You would think this would also work if say you're wearing a long sleeve shirt. I have been unable to trigger this via long sleeve shirts and I don't have thin enough clothing to test the pocket, nor do I own a bag to test.
"The device’s 3-inch circular Super AMOLED display has a resolution of 360 x 360. Its 16 million colors, full color Always On Watch continuously shows the time rather than fading to black. The ambient light sensor helps to adjust the brightness of displayed information and works to automatically disable the Always On Watch when users can’t see the screen, such as when the watch is in a pocket or a bag. Users can opt to personalize their Always On Watch with customizable, interactive watch faces."
Who's willing to help me test this feature?
Naturesretard said:
So apparently on Samsungs official news site , the AOD display has a sensor that will disable the AOD when it's placed inside a pocket or a bag (Why would your watch be in your pocket or bag instead of your wrist?). You would think this would also work if say you're wearing a long sleeve shirt. I have been unable to trigger this via long sleeve shirts and I don't have thin enough clothing to test the pocket, nor do I own a bag to test.
"The device’s 3-inch circular Super AMOLED display has a resolution of 360 x 360. Its 16 million colors, full color Always On Watch continuously shows the time rather than fading to black. The ambient light sensor helps to adjust the brightness of displayed information and works to automatically disable the Always On Watch when users can’t see the screen, such as when the watch is in a pocket or a bag. Users can opt to personalize their Always On Watch with customizable, interactive watch faces."
Who's willing to help me test this feature?
Click to expand...
Click to collapse
Someone already posted on the forums about how their AOD wasn't working, and they found out it was because their strap was blocking their wrist from making contact with the sensor. I'm guessing that the heart rate sensor didn't sense a pulse and turned off the screen completely, or some other sensor all together.
Here's the link:
http://forum.xda-developers.com/gear-s3/help/problems-feature-t3507324/page2
My AOD also turns off when the watch determines that I'm sleeping and then requires a security pin.
Sent from my SM-G935P using Tapatalk
optimummind said:
My AOD also turns off when the watch determines that I'm sleeping and then requires a security pin.
Click to expand...
Click to collapse
My AOD works just fine. But it will not turn off when sleeping or covered. It senses my heartbeat just fine. Perhaps my unit is defective? How did you get it to turn it when sleeping, anything special?
Naturesretard said:
My AOD works just fine. But it will not turn off when sleeping or covered. It senses my heartbeat just fine. Perhaps my unit is defective? How did you get it to turn it when sleeping, anything special?
Click to expand...
Click to collapse
Nothing special. My Classic began to track my sleep automatically out of the box. After I wake up, I press a button or rotate the bezel then put in my pin. Shortly afterwards, I get an alert on the watch and it shows in numbers & a graph how long I slept and also shows me how long I was motionless, how long I had a little bit of movement, and how long I was restless.
When the watch is simply covered up by my longsleeve shirt or a jacket, my AOD doesn't turn off.
Sent from my SM-G935P using Tapatalk
It won't turn off AOD with long sleeves, because it knows you're wearing it. It only turns off if it's NOT on your wrist. Or when you're sleeping.
Did anyone install the new PK7 watch update on their Gear S3? Any issues with AOD? Like AOD not working or turning off despite the AOD setting being on?
Sent from my SM-G935P using Tapatalk
I just got my Frontier today, and I came here now looking for answers on the AOD feature i have been hearing about but have not witnessed as of yet... My watch goes completely black every time after about 4 to 5 second of inactivity. Like i said i was coming here now to XDA to find out if this was a config problem or what?? Two things I have seen here that may be an issue for me, 1 - i always wear long sleeve shirts, and 2 - i have always had trouble with the smart watch heart rate monitors getting a good pulse on my wrist. (This is my 5th smartwatch, 4th samsung) I did do all of the updates today when initially using watch. I have been wearing it about 8 hours. Hope this helps.
S1CAR1US said:
I just got my Frontier today, and I came here now looking for answers on the AOD feature i have been hearing about but have not witnessed as of yet... My watch goes completely black every time after about 4 to 5 second of inactivity. Like i said i was coming here now to XDA to find out if this was a config problem or what?? Two things I have seen here that may be an issue for me, 1 - i always wear long sleeve shirts, and 2 - i have always had trouble with the smart watch heart rate monitors getting a good pulse on my wrist. (This is my 5th smartwatch, 4th samsung) I did do all of the updates today when initially using watch. I have been wearing it about 8 hours. Hope this helps.
Click to expand...
Click to collapse
Settings > Style > Always on. Have you turned that on?
Also, it won't work if the watch isn't on your wrist.
Is there a way to increase the brightness of the AOD? Mine is hard to see unless I'm in a fairly dark room.
lyall29 said:
Is there a way to increase the brightness of the AOD? Mine is hard to see unless I'm in a fairly dark room.
Click to expand...
Click to collapse
No, I just kept gesture motion on.
kronium said:
No, I just kept gesture motion on.
Click to expand...
Click to collapse
That's my set up also.
lyall29 said:
Is there a way to increase the brightness of the AOD? Mine is hard to see unless I'm in a fairly dark room.
Click to expand...
Click to collapse
Try Settings, Display, Brightness.
gpmg762 said:
Try Settings, Display, Brightness.
Click to expand...
Click to collapse
Thanks, this does seem to be the only way to make the AOD brighter.
"Samsung Flaunt" is a widget you can install, i installed it on mine (you have to select it from widget once installed) as i found certain faces i have time out into a default (black face white hands and red second hand) i didnt want this, i wanted a face of my selection be it downloaded or a pre-installed face to remain on at all times especially if i go out, if you select the "Frontier" face (pre-installed) and have AOD Turned on you lose very little in quality / dimming when the time out kicks in, with "Samsung Flaunt" you install the widget and this then allows you to have the watch face on for up to 30 mins, However it will eat your battery, but then i can live with day to day charging, I like the idea of going out for a meal or a beer with pals and my face being on, i like the idea of a smart watch simulating a "real" watch look, as we all know there are thousands of faces we can select to show off.
S1CAR1US you can change the time out by going settings/Display/Screen Timeout/ then theres a choice of 15 seconds, 30 seconds, 1 minute or 5 minutes, if you select the desired time out, and go back to your normal face, by clicking your bezel one click left (notifications) and one click right (watch face) your face should remain on for that length of time, if this isn't long enough (wasn't for me) i used the "Samsung Flaunt" widget.
Rgds
Is it possible or not to set automatique disable AOD for exemple every day at 23 h to 07 h ?
[email protected] said:
Is it possible or not to set automatique disable AOD for exemple every day at 23 h to 07 h ?
Click to expand...
Click to collapse
Would be very useful, but it is not possible.
I mean you can't set it in system settings, but it is possible to use a "complication" in Gear Watch Designer.
I designed a couple of watch faces setting a complication to turn off AOD every night, was very simple.
slimsta said:
"Samsung Flaunt" is a widget you can install, i installed it on mine (you have to select it from widget once installed) as i found certain faces i have time out into a default (black face white hands and red second hand) i didnt want this, i wanted a face of my selection be it downloaded or a pre-installed face to remain on at all times especially if i go out, if you select the "Frontier" face (pre-installed) and have AOD Turned on you lose very little in quality / dimming when the time out kicks in, with "Samsung Flaunt" you install the widget and this then allows you to have the watch face on for up to 30 mins, However it will eat your battery, but then i can live with day to day charging, I like the idea of going out for a meal or a beer with pals and my face being on, i like the idea of a smart watch simulating a "real" watch look, as we all know there are thousands of faces we can select to show off.
S1CAR1US you can change the time out by going settings/Display/Screen Timeout/ then theres a choice of 15 seconds, 30 seconds, 1 minute or 5 minutes, if you select the desired time out, and go back to your normal face, by clicking your bezel one click left (notifications) and one click right (watch face) your face should remain on for that length of time, if this isn't long enough (wasn't for me) i used the "Samsung Flaunt" widget.
Rgds
Click to expand...
Click to collapse
Where did u install it from.. Cannot find it in playstore store nor Samsung stire
Sent from my Nexus 6P
I went into samsung gear app/samsung Galaxy apps/searched for flaunt, installed and it should sync to widgets on your s3 gear, hope this helps?
Secret section gear 3
lyall29 said:
thanks, this does seem to be the only way to make the aod brighter.
Click to expand...
Click to collapse
if you guys trying fix all the lil things like brightness and touch and sound go settings_gear info_about device_software version when you infront of this click 5x and that will bring up dialer on there then just press *#0*# from here you can mess with brightness and all sorts of stuff if you figure wat *#0011# will help me out been trying bunch old codes from my s3 s5 days alot work on this lil thing and also if anyone figures out how too turn on dev mode cuz of thizzz pm me thanks....