Database Info

Google map

Hello, possible use Google map MCTD platform with a Rockchip rk3188 processor, Android 5.1.1 ?
Thx

boolat said:
Hello, possible use Google map MCTD platform with a Rockchip rk3188 processor, Android 5.1.1 ?
Thx
Click to expand...
Click to collapse
well you can but it will be TOO slow since google maps consume too many memory and we only got 1GB RAM, i use "IGO Navigation" instead.

boolat said:
Hello, possible use Google map MCTD platform with a Rockchip rk3188 processor, Android 5.1.1 ?
Thx
Click to expand...
Click to collapse
yes, if you have one of the new PX3 with 2GB and Android 7.1.x

zerozoneice said:
yes, if you have one of the new PX3 with 2GB and Android 7.1.x
Click to expand...
Click to collapse
You upgrade? If yes, how please ?

I think he means a complete new unit, not only a board upgrade

thank you all for the info on this forum disabled playstore and playservice and google maps installed sygic payed for traffic info. uniit now runs like it is supposed to be (wish i read all this sooner

MTCD PX3 with android 7.1.2 - downgrade for rooted rom?

Hi!
I have a PX3 MTCD (XRC) quad core 2GB with android 7.1.2 nougat
nougat is nice, but i'm wondering if it is really necessary to have the latest android offering on these units?
would there be a benefit to downgrading to a rooted Malaysk 5.1 rom?
I'm looking for speed and reliability.
Usually I'll have the following running:
nova launcher
neutron for music player (my music is all FLAC files which neutron plays.. also neutron widget is great/stable)
or sometimes pandora
navigation: google maps, sometimes waze
when not actively using navigation apps to get anywhere, i'll have MiniMap overlay on the left half of the home screen and pandora/neutron widgets on the right, just below a Google Now widget (shows weather and some important info)
minimap overlay: https://play.google.com/store/apps/details?id=com.teqtic.minimap&hl=en (very cool floating/re-sizable)
I've got a mobile jetpack in the glovebox for data (not sure I can recommend this if you live someplace hot)
Here are some specs of the unit I've got:
CPU Rockchip 3188 Cortex A9 Quad core
RAM DDR3 2GB
Flash 16GB
GPS SIRF III
Loader FORYOU DL-30
Amplifer IC ST TDA7388
Radio IC ST TDA7786
Bluetooth 4.0
Resolution 1024*600
Max output 4*50W
Main Frenqency 1.6GHz
So should I stick with 7.1.2 or would there be much more benefit for speed/customization/?? if I downgrade for rooted rom?
Thanks!

Do you installed the Malaysk rom? I have the same system and i want to downgrade it, but im so confused because ther's not a lot of info. for px3
Please tell me if u do it

opc1135 said:
Do you installed the Malaysk rom? I have the same system and i want to downgrade it, but im so confused because ther's not a lot of info. for px3
Please tell me if u do it
Click to expand...
Click to collapse
i have not... but if you end up doing it, let ME know

Hello there
have you figured any way to root ?
---------- Post added at 02:10 AM ---------- Previous post was at 02:09 AM ----------
Hello there
have you figured any way to root ?

I'm +1 for the rooting question as I have not figured any way to do it yet.

I have pretty much the same unit, for my Kia optima. I tried to install malaysk's rom and recovery asked for nupdate.img, not dupdate.img like all these other threads specify. Even renaming the file to nupdate didn't work, told me invalid firmware. I have another thread asking for advice, but it hasn't garnered a response.
Sent from my SM-G955U using Tapatalk

I have the same unit. Do you haven any problems with the car control app?

Has in the meantime already someone have found away to root the HU?
I have a similar MTCD_KLD_V2.58_1
and also look for a root solution

XRC Root Solution
Hi All,
Might have something that may help. An img file provided as a root solution but A-Sure (another supplier on the list) but I cannot get it to work I either get a partial file or a complete one. I cant post links due to my current post count but if anyone want the file to check out and maybe figure out where I am going wrong you are welcome. Drop me a PM and I will pass on my G-drive location for the download
Mine is MTCD_XRC_2.54a_1
---------- Post added at 01:15 PM ---------- Previous post was at 12:38 PM ----------
Here are the details on my HU
64Bit Octocore - Coretex [email protected]
2GB
MTCD_XRC_V2.54a_1 June 16 2017
Branded under A-sure, this is a dedicated shell for an Audi TT
Many issues as with many of these HUs
No steering controls
Partial Bluetooth support
Doesn't recognise 4G USB Dongles

@Whizzbangles
Hi,
I have the same unit as yours mounted in my 2008 audi TT mk2 and everything works perfectly : bluetooth, steering wheel control, usb sticks...
Didn't try to root or change anything yet. Only issue is "Audroid auto apk I downloaded (not present in my Play Store) is not working.
Still discovering MTCD world...

I would be interested in your settings around the canbus and also just a check on how you have set up the wiring.

mp3joker said:
Has in the meantime already someone have found away to root the HU?
I have a similar MTCD_KLD_V2.58_1
and also look for a root solution
Click to expand...
Click to collapse
I just rooted my mtcd_kld_v2.58_1 with KingOroot. I then upgraded SU to SuperSU and uninstalled KingOroot while still retaining root. Its in one of the threads in this forum.

Yes, Kingoroot does the job. I am still however struggling to get my MF730M working.

maniac2k said:
I just rooted my mtcd_kld_v2.58_1 with KingOroot. I then upgraded SU to SuperSU and uninstalled KingOroot while still retaining root. Its in one of the threads in this forum.
Click to expand...
Click to collapse
Hi,
have you got a link for the apk as kingoroot with me just crashes on startup?

Turbojo said:
Hi,
have you got a link for the apk as kingoroot with me just crashes on startup?
Click to expand...
Click to collapse
https://root-apk.kingoapp.com/kingoroot-download.htm

Ah, thats the one that crashes on startup. Shame.

It crashes on mine too. Rk3188 px3 with 2gb of RAM. 7.1

Im running the px5. Does it install superuser and give you root? If so, you can install supersu after and uninstall kingoroot and superuser, leaving root with just supersu.

Hallo, can I root my PX3 MTCD_KLD_V2.59_1 ?
This are the dates:
Model: px3 (1024x600 0)
Android version: 7.1.2
Android security level: 5. Mai 2017
Kernel version: 3.0.101+ [email protected] #746 Sat Sep 9 20:52:39 CST 2017
Buil number: px3-userdebug 7.1.2 NHG47L eng.hct.20170915.133654 test-keys
MCU version: MTCD_KLD_V2.59_1 Aug 3 2017 09:33:07
CPU: ARM Coretex-A9 @1.6GHz (x4)
Memory: 2048 MB
KingoRoot will not startet !
Thank you

doblebo said:
Hi!
I have a PX3 MTCD (XRC) quad core 2GB with android 7.1.2 nougat
nougat is nice, but i'm wondering if it is really necessary to have the latest android offering on these units?
would there be a benefit to downgrading to a rooted Malaysk 5.1 rom?
I'm looking for speed and reliability.
Usually I'll have the following running:
nova launcher
neutron for music player (my music is all FLAC files which neutron plays.. also neutron widget is great/stable)
or sometimes pandora
navigation: google maps, sometimes waze
when not actively using navigation apps to get anywhere, i'll have MiniMap overlay on the left half of the home screen and pandora/neutron widgets on the right, just below a Google Now widget (shows weather and some important info)
minimap overlay: https://play.google.com/store/apps/details?id=com.teqtic.minimap&hl=en (very cool floating/re-sizable)
I've got a mobile jetpack in the glovebox for data (not sure I can recommend this if you live someplace hot)
Here are some specs of the unit I've got:
CPU Rockchip 3188 Cortex A9 Quad core
RAM DDR3 2GB
Flash 16GB
GPS SIRF III
Loader FORYOU DL-30
Amplifer IC ST TDA7388
Radio IC ST TDA7786
Bluetooth 4.0
Resolution 1024*600
Max output 4*50W
Main Frenqency 1.6GHz
So should I stick with 7.1.2 or would there be much more benefit for speed/customization/?? if I downgrade for rooted rom?
Thanks!
Click to expand...
Click to collapse
The RK3188/PX3 2Gb N units use a slightly modified SoM compared to the older RK3188/PX3 1Gb L units (the motherboard is the same). @Hal9k_ managed to get the N ROM to work on the older board simply by altering the partitioning so it should theoretically be possible to make the L ROM run on the later units as well.

Stock APKs MOD for MTCD?

Hi guys..
I have been searching but can´t find any modded apps for the radio, bluetooth and music like the ones I can find for Android 5.1.1...
but for Android 7.1 don´t find anything..

What about something like this:

Possible to have this mod for Intel Sofia 3G devices?
https://forum.xda-developers.com/an...ia-units-wifi-3g-t3533154/page69#post75302072

KoTiX2 said:
What about something like this:
Click to expand...
Click to collapse
good! Only for px5?

Px3 or px5 shouldn't really matter, the apps are the same...
I cannot make it for intelsofia because I don't have such a unit to test it.
I

KoTiX2 said:
What about something like this:
Click to expand...
Click to collapse
Hello Kotix, I used your ROM for the Roadnav s160 and now I have bought a PX5 model. I was glad when I saw your video of a ROM for PX5. Where can I follow the evolution of this work?
Thanks and best regards.

Hi Hanzejo,
I will post more videos on my youtube channel

but you have a rom with 7.1 nougat?

I have also a a nougat ROM to work on but right now there is nothing ready for public.
My plan is to finalize the px5 (android 6) ROM first and adapt it to px3 (android 7) later.
I don't know the timings to do all this...

Here are some more progresses in the main apps customization
I also made some new widgets and resized the clock ones:

Linux on Android rockchip box

Hi everyone !
Which Linux distribution do you recommend on Android box with Rockchip chip and more exactly RK3566?
For you, it is better to buy Amlogic X3 and X4 or Rockchip 3566 Android boxes such as X88 Pro 20, H96 Max ...?
All opinions are welcome.

Armbian is the go-to distro because it's lightweight and already have many models already working

Join this topic...
there is a base to make linux on that device you are looking for, just a few adaptations

hotnikq said:
Join this topic...
there is a base to make linux on that device you are looking for, just a few adaptations
Click to expand...
Click to collapse
Thank you very much!

lets build it!

hotnikq said:
lets build it!
Click to expand...
Click to collapse
I suppose it'll work on a 8GB Ram as well?

iusr419 said:
I suppose it'll work on a 8GB Ram as well?
Click to expand...
Click to collapse
test the 8gb release on topic and post the results there

MTCE Head Unit resolution problem, no usb, how to change DPI

Hi All,
I have a MTCE unit in my car.
With some tinkering I've managed to unlock its potential, Swapping the launcher, customizing a bit and so on.
The only thing that bothers me a lot is that the units DPI or resolution is ridiculous, every app is barely usable everything is huge.
the units screen is 800x600
and this is its info:
Code:
Model
A-MEDIA AUTO (800x480 O)
Android version
6.0.1
Core version
3.10.0
[email protected] #1320
Build number
px5-userdebug 6.0.1 MXC89L user.hct 20180130.142324 test-keys
MCU version
MTCE_HZC_V2.75b_1
CPU
8 core 64-bit CPU Cortex-A53 @ 1.5G
Memory
2000 MB
after searching the forum and the internet:
there is no obvoius usb connection for ADB, or wireless ADB
only 2 sd slots and a mini usb connector that apparently doesnt even work
no root.
no secret menus with passwords in settings
is there any way I can change the DPI on this thing?
any help would be greatly appreciated.

Your question is much better posted here: https://forum.xda-developers.com/f/mtcd-software-development.7379/
I´ll ask a mod to move it to there. May be have a look around there.
BTW: You really need to upgrade your unit to at least Android 9.

rigattoni said:
Your question is much better posted here: https://forum.xda-developers.com/f/mtcd-software-development.7379/
I´ll ask a mod to move it to there. May be have a look around there.
BTW: You really need to upgrade your unit to at least Android 9.
Click to expand...
Click to collapse
Thanks for the reply, how can I know if it will work ok with android 10, android 6 is old and the unit is old will it have enough umph..?

AlexShu said:
Thanks for the reply, how can I know if it will work ok with android 10, android 6 is old and the unit is old will it have enough umph..?
Click to expand...
Click to collapse
It has a bit issues with the Memory, but I think it would work fine... and you would be able to root, or use a custom ROM with it.

The resolution is changed using the dmcu.ext file. Choose the resolution of your inclusion, copy dmcu.ext to the sd card and update the MCU.
Яндекс
Найдётся всё
disk.yandex.ru
If you decide to update to Android 9 or 10, check if you have suitable bluetooth, you can find all the information here:
[MTCD/E] Android 10 upgrade using official Free tools
To upgrade a MTCD/E PX3, PX5, PX6 from Android 6+ on using official Rockchip free tools - a reminder, bringing together multiple threads. First note - if coming from Android 6 - early versions of Realtek dual BT/WIFI (type 2) are not supported...
forum.xda-developers.com

Pavel-71 said:
The resolution is changed using the dmcu.ext file. Choose the resolution of your inclusion, copy dmcu.ext to the sd card and update the MCU.
Яндекс
Найдётся всё
disk.yandex.ru
If you decide to update to Android 9 or 10, check if you have suitable bluetooth, you can find all the information here:
[MTCD/E] Android 10 upgrade using official Free tools
To upgrade a MTCD/E PX3, PX5, PX6 from Android 6+ on using official Rockchip free tools - a reminder, bringing together multiple threads. First note - if coming from Android 6 - early versions of Realtek dual BT/WIFI (type 2) are not supported...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank you pavel, is there a some detailed info about how to do the resolution change?

AlexShu said:
Thank you pavel, is there a some detailed info about how to do the resolution change?
Click to expand...
Click to collapse
nevermind, i figured it out.
so if my unit is HZC i go to HZC and pick the last one ?
Яндекс
Найдётся всё
disk.yandex.ru

AlexShu said:
nevermind, i figured it out.
so if my unit is HZC i go to HZC and pick the last one ?
Яндекс
Найдётся всё
disk.yandex.ru
Click to expand...
Click to collapse
If you want to update the MCU, then yes. Before updating, save the settings in the dmcu.cfg file, it is a backup of your settings, in case of problems with dmcu.cfg, you update the MCU and everything will return to the original settings. Factory settings/126/EXPORT, you can find the file in the root directory, take good care of it, save it to external storage.