Hi,
Kindly consider the following case:
My idol 3 Stock rom is for some reason causing my phone to bootloop forever and i plan to test a custom rom to see if there would be any progress.
My idol 3 variant is 6045K which does not have SD card
Thus, im not able to put custom roms to flash and i'm stuck with the mobile upgrade from alcatel which is retarded or sugar QCT software which is useful to re-flash stock roms only which does not solve the issue.
Any recommendations how to workaround the bootloop and put a zip custom rom on my phone storage ?
P.S: I only have access to stock recovery and download mode.
No internal storage access nor SD card available
You can always use the Eluga tool and try to downgrade using an old version of Mobile Upgrade Q, Or if you still are on LP, Unlock your bootloader, Flash TWRP and install the ROM of your choice.
Huskied said:
You can always use the Eluga tool and try to downgrade using an old version of Mobile Upgrade Q, Or if you still are on LP, Unlock your bootloader, Flash TWRP and install the ROM of your choice.
Click to expand...
Click to collapse
Thank you for your attention.
I have few concerns if you pls,
* can i use eluga awitch to flash custom rom instead of the stock one that can not fix my bootloop?
* how can i downgrade with alcatel mobile upgrade Q? i'm not following you
* fastboot commands seem not to be working, how may i unlock bootloader ?
Kindly advise
DaHiA said:
Thank you for your attention.
I have few concerns if you pls,
* can i use eluga awitch to flash custom rom instead of the stock one that can not fix my bootloop?
* how can i downgrade with alcatel mobile upgrade Q? i'm not following you
* fastboot commands seem not to be working, how may i unlock bootloader ?
Kindly advise
Click to expand...
Click to collapse
My apologies, Let me rephrase.
- You can use Eluga Switch to head back to LP and use an older version of Mobile Upgrade. Eluga you can use without having to use Mobile Q, But warning, LTE is a no go on those ROMs and you will (Allegedly) permanently lose LTE unless someone here with the same Variant can help.
- Since you don't have any fastboot commands this is my last option, Use the Alcatel Flasher to flash TWRP and use one of the stock ROMs here that has all the partitions for you to get your phone back to normal.
Huskied said:
- Since you don't have any fastboot commands this is my last option, Use the Alcatel Flasher to flash TWRP and use one of the stock ROMs here that has all the partitions for you to get your phone back to normal.
Click to expand...
Click to collapse
I believe the solution is coming close..
I need to know how to use alcatel flasher to flash custom rom or TWRP as all i can get from eluga or sugar qct or even mobile upgrade Q is only the stock rom which can not fix my bootloop issue
Pls note that i don't have SD card or access to enable USB debugging
Kindly advise
DaHiA said:
I believe the solution is coming close..
I need to know how to use alcatel flasher to flash custom rom or TWRP as all i can get from eluga or sugar qct or even mobile upgrade Q is only the stock rom which can not fix my bootloop issue
Pls note that i don't have SD card or access to enable USB debugging
Kindly advise
Click to expand...
Click to collapse
https://forum.xda-developers.com/idol-3/development/tool-sahara-firehose-test-alcatel-t3454855
Huskied said:
https://forum.xda-developers.com/idol-3/development/tool-sahara-firehose-test-alcatel-t3454855
Click to expand...
Click to collapse
Thank you so much.
I went with the russian guide as far as i could and reached the "read" step
But i'm not sure how to make use of it with "boot" or "recovery" partitions to fix my bootloop issue
I wandered around the flasher to see if there is any import feature to add a custom rom in order to flash but failed.
Would you kindly brief me how to proceed after reaching the "read" step?
DaHiA said:
Thank you so much.
I went with the russian guide as far as i could and reached the "read" step
But i'm not sure how to make use of it with "boot" or "recovery" partitions to fix my bootloop issue
I wandered around the flasher to see if there is any import feature to add a custom rom in order to flash but failed.
Would you kindly brief me how to proceed after reaching the "read" step?
Click to expand...
Click to collapse
https://forum.xda-developers.com/idol-3/general/guide-hoe-to-root-ota-easy-t3493400
You don't add custom ROMs on an actual Flasher. :/
Related
So, i updated to my Idol 3 5.5 to official MM
Is there a way to root it? i am trying to flash twrp via fastboot, but am getting a failed message
can someone help?
resolved
kovcoo said:
So, i updated to my Idol 3 5.5 to official MM
Is there a way to root it? i am trying to flash twrp via fastboot, but am getting a failed message
can someone help?
Click to expand...
Click to collapse
You should have done a little more reading. You needed to have twrp installed BEFORE you flashed MM.
Your options now are to downgrade to regain fastboot and flash twrp then flash one of the MM rom's in android development.
If on a 6045i you will have to use panasonic eluga switch's firmware flasher to get you back to 5.02 because marshmallow is already in mobile q.
If NOT on a 6045i you can still use mobile q from the alcatel page to get back to 5.0.2.
A search of the forum will find links to both as will a google search.
famewolf said:
You should have done a little more reading. You needed to have twrp installed BEFORE you flashed MM.
Your options now are to downgrade to regain fastboot and flash twrp then flash one of the MM rom's in android development.
If on a 6045i you will have to use panasonic eluga switch's firmware flasher to get you back to 5.02 because marshmallow is already in mobile q.
If NOT on a 6045i you can still use mobile q from the alcatel page to get back to 5.0.2.
A search of the forum will find links to both as will a google search.
Click to expand...
Click to collapse
thanks that worked.
i had to Flash twrp..cheers
famewolf said:
You should have done a little more reading. You needed to have twrp installed BEFORE you flashed MM.
Your options now are to downgrade to regain fastboot and flash twrp then flash one of the MM rom's in android development.
If on a 6045i you will have to use panasonic eluga switch's firmware flasher to get you back to 5.02 because marshmallow is already in mobile q.
If NOT on a 6045i you can still use mobile q from the alcatel page to get back to 5.0.2.
A search of the forum will find links to both as will a google search.
Click to expand...
Click to collapse
Wow, am I glad I found this. I'm just one step from updating my brand new phone to MM. Phew!!
David C.
why this forums is not active ?
I was trying to root my device, i unlocked bootloader, whenever i was trying to install TWR my device go through the recovery only, couldn't go through OS, i solved it by installing stock firmware via flashtool, I want to install recovery to install custom Rom, is there any suggestion for a good custom Rom ?
flashing TWRP does cause some issue in the boot partition of the phone if you try to flash it via fastboot .
But if you really want that recovery as well as your rom try this method hope this solves your problem
https://forum.xda-developers.com/z3/general/recovery-root-mm-575-291-lb-t3435214
Thanks phone is Rooted
Tech core said:
flashing TWRP does cause some issue in the boot partition of the phone if you try to flash it via fastboot .
But if you really want that recovery as well as your rom try this method hope this solves your problem
https://forum.xda-developers.com/z3/general/recovery-root-mm-575-291-lb-t3435214
Click to expand...
Click to collapse
I tried it and i did root my device, but is it a temporarily to install TWRP then after root your device you can't boot in recovery again ?
2nd thing My model number is D6633
Build number :- 23.5.A.0.570
what is the best custom Rom regarding stability and bug free here, if you tried many custom Rom?
I know that it depends on everyone opinion and needs, but I want to know your experience
Ahmed.ragab said:
I tried it and i did root my device, but is it a temporarily to install TWRP then after root your device you can't boot in recovery again ?
2nd thing My model number is D6633
Build number :- 23.5.A.0.570
what is the best custom Rom regarding stability and bug free here, if you tried many custom Rom?
I know that it depends on everyone opinion and needs, but I want to know your experience
Click to expand...
Click to collapse
Personly i like Xkeita linage os 14.1 it is mostly stable but i dont mine having 60 fps video recording it is a good stable rom
deleted.
Reserved
Hi, I got a BLU Studio J1. I am sorry for the newbie question. I am looking to root this device. No intention on installing any custom ROM, I only need root. Can you point me out which files (if available) would I need to do so? Thank you!
BobAt1080p said:
Hi, I got a BLU Studio J1. I am sorry for the newbie question. I am looking to root this device. No intention on installing any custom ROM, I only need root. Can you point me out which files (if available) would I need to do so? Thank you!
Click to expand...
Click to collapse
You have the BLU Studio J1 - S050Q - MT6570 - Android 6.0 Marshmallow - 512RAM - 8GB ROM.
So my question can be funny. But need.
You searched any custom recovery for your device before asking here?
If yes: So you have 2 ways. 1) Got to link and the guys create one to you => TWRP Builder
Read all thread!!
2) send me 3 files from stock ROM (same build version ROM of your device): recovery.img - boot.img - scatter....txt
If you don't have stock ROM, so I can't help!!
You need know about tool process to flash files.
READ this!!
About TWRP question:
1- is need anyone with experience (or courage to do) to flash stock files with SPFT.
IYou can able to do a backup stock ROM with SPFT if build version ROM is different from firmware. Then you will be able to flash the test file.
2- is need know if need unlock bootloader or not.
The first moment NO UNLOCK! If the file test not boot so is need Unlock to know if work file test.
3- I not need phone in my hands. But is very easy and fast solving issues when have its.
Because is more easy to repair phone if anything wrong happens. So the risk and responsability is of the user!!
lopestom said:
You have the BLU Studio J1 - S050Q - MT6570 - Android 6.0 Marshmallow - 512RAM - 8GB ROM.
So my question can be funny. But need.
You searched any custom recovery for your device before asking here?
Click to expand...
Click to collapse
Okay. Lets go by part. I have not looked/found any custom recovery for this device yet. If I am correct, getting a custom recovery for my device/build would allow me to initiate or start the process or rooting the phone? right?
lopestom said:
If yes: So you have 2 ways.
1) Got to link and the guys create one to you => TWRP Builder
Read all thread!!
Click to expand...
Click to collapse
I suppose I can work on this. I am just confused on this part.
"Get any working recovery.img for your device (from stock ROM or old working TWRP)"
Do I have to get it somewhere or, I can get it from that App of that thread?
lopestom said:
2) send me 3 files from stock ROM (same build version ROM of your device): recovery.img - boot.img - scatter....txt
If you don't have stock ROM, so I can't help!!
Click to expand...
Click to collapse
I ALSO can do this option instead. But how can I extract those files from my phone? or extract the stock ROM?
lopestom said:
You need know about tool process to flash files.
READ this!!
About TWRP question:
1- is need anyone with experience (or courage to do) to flash stock files with SPFT.
IYou can able to do a backup stock ROM with SPFT if build version ROM is different from firmware. Then you will be able to flash the test file.
2- is need know if need unlock bootloader or not.
The first moment NO UNLOCK! If the file test not boot so is need Unlock to know if work file test.
3- I not need phone in my hands. But is very easy and fast solving issues when have its.
Because is more easy to repair phone if anything wrong happens. So the risk and responsability is of the user!!
Click to expand...
Click to collapse
I have some experience with flashing devices, and I am aware of some of its basic principles and what It means. I am willing do it myself and take the risk, given I wont need get or purchase extra hardware for it. I assume with SPFT is some sort of tool that I can use to extract my current ROM build and flash?
BobAt1080p said:
If I am correct, getting a custom recovery for my device/build would allow me to initiate or start the process or rooting the phone? right?
I suppose I can work on this. I am just confused on this part.
"Get any working recovery.img for your device (from stock ROM or old working TWRP)"
Do I have to get it somewhere or, I can get it from that App of that thread?
I ALSO can do this option instead. But how can I extract those files from my phone? or extract the stock ROM?
I have some experience with flashing devices, and I am aware of some of its basic principles and what It means. I am willing do it myself and take the risk, given I wont need get or purchase extra hardware for it. I assume with SPFT is some sort of tool that I can use to extract my current ROM build and flash?
Click to expand...
Click to collapse
With Custom recovery you can flash SuperSu or Magisk to have Root. Marshmallow ROM has the part that no good to Root with apps (in first released. But can have modified.).
So You can try some apps or software to have Root like kingroot (I don't like that but...). Search in xda!
Stock ROM: click in the link first post have Source Code going to thread with firmware and SEARCH if exist.
On that can have recovery.img file.
If not: send me PM and I show for you.
Your MT6570 can have difficulty or easy. All depend of your knowledge, courage and attempts!
Obviously, with security is better!!
Sent from my BLUBOO Xtouch using XDA Labs
lopestom said:
With Custom recovery you can flash SuperSu or Magisk to have Root. Marshmallow ROM has the part that no good to Root with apps (in first released. But can have modified.).
So You can try some apps or software to have Root like kingroot (I don't like that but...). Search in xda!
Click to expand...
Click to collapse
I will give that a try.
lopestom said:
Stock ROM: click in the link first post have Source Code going to thread with firmware and SEARCH if exist.
On that can have recovery.img file.
Click to expand...
Click to collapse
Studio J1 S050Q
http://www.mediafire.com/folder/5oyd...o%20J1%20S050Q
I previously had found this on your BLU Stock firmware thread, but was not sure if that was it. So I don't need to extract the ROM from my phone? Can I get the files/information I need for the TWRP Builder with this stock ROM?
BobAt1080p said:
I will give that a try.
Studio J1 S050Q
http://www.mediafire.com/folder/5oyd...o J1 S050Q
I previously had found this on your BLU Stock firmware thread, but was not sure if that was it. So I don't need to extract the ROM from my phone? Can I get the files/information I need for the TWRP Builder with this stock ROM?
Click to expand...
Click to collapse
I think you not reading first post.
The V6.0.03.01 stock ROM file is same version from your phone?
Setting - about phone - build version
If yes: unzip file, look recovery.img and following instructions by twrp builder.
Sent from my BLUBOO Xtouch using XDA Labs
i Have a Blu S1 (Blu R1 HD 2018) rooted with magisk and i did a working TWPR ported from Doogee Y6, but my problem is that when i boot in TWPR it ask for a patron to decrypt data. I draw the patron but it fail to decrypt (can use normaly) and internal storage shows 0MB.
Recovery shows a partition called /System Image" with 2650Mb and /Data with around 12Gb
Any way to fix this issue?
Edit: I did a factory reset. Now the internal storage is fixed and TWPR dont ask for decryp data. But the Wipe Data delete the files in internal storage
Rvrjei said:
i Have a Blu S1 (Blu R1 HD 2018) rooted with magisk and i did a working TWPR ported from Doogee Y6, but my problem is that when i boot in TWPR it ask for a patron to decrypt data. I draw the patron but it fail to decrypt (can use normaly) and internal storage shows 0MB.
Recovery shows a partition called /System Image" with 2650Mb and /Data with around 12Gb
Any way to fix this issue?
Edit: I did a factory reset. Now the internal storage is fixed and TWPR dont ask for decryp data. But the Wipe Data delete the files in internal storage
Click to expand...
Click to collapse
You have the BLU S1 - S0320WW - MT6750 - Android 7.0 Nougat - 2 GB RAM - 16GB ROM.
For TWRP 3.2.x (either the kernel with Marshmallow or Nougat) it is necessary to perform a data reset (WIPE - FORMAT DATA) part so that the TWRP recognizes the data structure in the phone. This is required for TWRP to also see internal storage.
For people who do not know, there is currently a patch.zip called disable_encryption (forceencrypt=> encryptable). But it should be done particularly for an MT6750 with Android 7 or someone else making one for /or you do yourself.
With the option made in FORMAT DATA the device will start the ROM as factory.
That's why I always write something that people should know about like the attacked image.
Obviously, after installing TWRP you could use a MicroSD to back up your data. But, since you have already reset ....
Regarding partitions do you need to know, compare and confirm if the TWRP coming from the donor has the same partitioning structure as your phone.
If everything works out well, congratulations and good luck! :fingers-crossed:
@lopestom intentionally i reset factory to remove the data encryption and it worked. TWRP shows all the partitions with the available space.
What I want is to be able to do in the future, to clean Data without removing files from internal storage (music, pics)
Could that be possible?
I compared the partition table of both and they are the same.
The difference between the devices more than everything, is in ram and storage.
Hace the same mt6750
Rvrjei said:
@lopestom intentionally i reset factory to remove the data encryption and it worked. TWRP shows all the partitions with the available space.
What I want is to be able to do in the future, to clean Data without removing files from internal storage (music, pics)
Could that be possible?
I compared the partition table of both and they are the same.
The difference between the devices more than everything, is in ram and storage.
Hace the same mt6750
Click to expand...
Click to collapse
Well. If you or other user installing TWRP in first time so yes, need FORMAT Data. But installing universal disable encrypt patch and Root so I think the users no lost internal storage. Obviously if TWRP look internal storage after install that files....
If no, so need FORMAT Data. In this case that's need only in first install TWRP. After that no need same process....
Two ways for no lost files: 1) put files in the Microsd. 2) in each period you can copy files to your PC or host/server like google photos, drive, etc...
Sent from my BLUBOO Xtouch using XDA Labs
Hello, I have a BLU STUDIO C 5+5 D890U, there is the phone but no recovery file A little help please, i wish to install a recovery and then a custom ROM
Raen! said:
Hello, I have a BLU STUDIO C 5+5 D890U, there is the phone but no recovery file A little help please, i wish to install a recovery and then a custom ROM
Click to expand...
Click to collapse
I sent PM to you.........
READ FAQ in first page too!!
:cyclops:
i have the files to install twrp and root BLU VIVO 5 MINI
I don't know how to root a blu studio j8
arxii said:
I don't know how to root a blu studio j8
Click to expand...
Click to collapse
You can try the KingRoot option from here. It worked on my Blu Studio One Plus. It says 2018 but its updated 2019 in the actual post. But in reality, nothing probably changed from the previous year to this year
https://www.xda-developers.com/best-one-click-root-2018/
---------- Post added 12th November 2019 at 12:02 AM ---------- Previous post was 11th November 2019 at 11:53 PM ----------
Hello lopestom, thank you for the TWRP for the Blu Studio One Plus. I tried getting the file from Android File Host but it kept telling me that access was denied to me there. Luckily I found it here.
I am hoping you can help me as I now want to use TWRP and magisk to root my device instead of the kingroot that I used previously.
Can you upload the stock boot.img for the Blu Studio One Plus? I'm trying to flash the stock firmware once more onto the device so It can hopefully fix some problems I'm having. After removing kingroot, it's being pesky and not letting me fully remove root and is at times stuck in a bootloop or not wanting to boot properly at all.
I'm able to access factory mode, standard recovery mode, and go into fastboot. But I'm afraid to create my own boot.img from it's current state, fearing the current problems will persist. The latest firmware I have is BLU_S0130UU_V14_GENERIC
Thank you for any help you can provide.
...............................
Hello again!
I found the TWRP from your downloads link in you= first post and then with even more searching I found a stock image here on XDA for the phone. Thank you for your help!
Hello everyone, I was able to successfully port a RR Rom for this device.
Installation:
- Get SP Flash Tools (I used version 5.1512.0, like before)
- Download the RR ROM - https://mega.nz/#!swcRzAgB!fI4CbeHIfx_CdyPrmMNcGN4uQFy4YhaJohufU_DGxGI
- Download TWRP (scatter file included) - https://mega.nz/#!1xUjRIiA!0aFkvFOe0QP_f5SlMcBAPo0nCWNJbW0iagW0OlDaLlU
- Open the "RR 5.8.5 - 7.1.2" zip file, and put "boot.img" and "magisk_patched.img" into your phone's INTERNAL storage so you can find them later
- Flash the recovery through SP Flash Tools to "BOOT" partition! (If you flash it to "recovery" partition, the screen may not work)
- Reboot, it should boot into TWRP
- Wipe system, cache, data, dalvik cache
- Flash the ROM (you don't need to flash Gapps, they are pre-installed)
- After it's done, go back and click "Install", then "Install image".
- Flash either "boot.img" if you want no root access, or "magisk_patched" if you want the root access.
- Reboot.
- Wait for it to boot
Bugs
- No fingerprint is available to set-up
- Let me know if you find any?
Donate
If you like my work, please consider donating:
PayPal: https://www.paypal.com/donate?hosted_button_id=QYSZDSMUGQKWG
This is my 2nd attempt at porting, ever, sorry for not being straight-forward and making this overly complicated.
If this works well for people I might try MIUI next.
And let me know if your device reads/works properly with SD card inserted! I think it may be just my device that doesn't recognize any, but would be nice to get some confirmation.
All credits go to Cleopatra Bianchi for providing TWRP.
(https://www.needrom.com/download/cheetah-twrp-3-0-2-1/)
thank you. smooth and good Rom
Did you find/encounter any bugs?
Hello,
Nothing major problem. Only I can't play downloaded video but I can watch through youtube and facebook. Just blank screen only. Thank you for the rom. Better from the stock rom
hayati1 said:
Hello,
Nothing major problem. Only I can't play downloaded video but I can watch through youtube and facebook. Just blank screen only. Thank you for the rom. Better from the stock rom
Click to expand...
Click to collapse
Hmm, maybe try an app from play store that let's you play videos and see if it works? Like VLC, or something.
Sorry for extremely late reply
Hello friends, I know it's not the right topic, I apologize but I'm trying ... I have a new Cubot Note 20 Pro and I would like a TWRP image for it but I can't find it anywhere. Maybe someone knows an image compatible with my phone. Please, can anybody be so kindly to help me with an advice? Thank you.
Hellera said:
Hello friends, I know it's not the right topic, I apologize but I'm trying ... I have a new Cubot Note 20 Pro and I would like a TWRP image for it but I can't find it anywhere. Maybe someone knows an image compatible with my phone. Please, can anybody be so kindly to help me with an advice? Thank you.
Click to expand...
Click to collapse
You could try auto twrp porter. I used in on my Prestigio 3450DUO and worked LONG time ago. If it doesn't work let me know and I will try to help
Firmware Care
FirmwareCare is one of the ideal firmware download websites, serving Stock Firmware (ROM) for 343 Mobile brands in the World. The Stock Firmware shared on the website came with the Driver, Flash Tool, and How-to Flash Manual.
firmwarecare.com
kazkas1398 said:
You could try auto twrp porter. I used in on my Prestigio 3450DUO and worked LONG time ago. If it doesn't work let me know and I will try to help
Firmware Care
FirmwareCare is one of the ideal firmware download websites, serving Stock Firmware (ROM) for 343 Mobile brands in the World. The Stock Firmware shared on the website came with the Driver, Flash Tool, and How-to Flash Manual.
firmwarecare.com
Click to expand...
Click to collapse
Thank you @kazkas1398, I'll try it... I'll be back!
I understand all of these, I know to work with adb, fastboot commands but I cannot unlock bootloader on my device, Cubot Note 20 Pro. I was searching about 3 days for this, I found what I knew but it seems that no command works in fastboot:
fastboot oem unlock
fastboot oem unlock-go
fastboot flashing unlock
fastboot flashing unlock_critical
fastboot oem unlock_critical
I must mention... Developer options, OEM-unlocking and USB-debugging checked, all MTK and ADB drivers installed, I'm not a begginer... but, of course, I don't know everything. So, I need a little help!
Nothing works, no command... it says "... command not supported in default implementation". I need unlock the bootloader first of all for rooting my device and other reasons.
I'm really frustrated, blocked in this situation! Can anybody help my to unlock bootloader, please? Thank you.
Ok friends, I managed to unlock bootloader, get root... and I tried to port the stock recovery with Mediatek Auto TWRP Recovery Porter.
Then, I flashed vbmeta and recovery images in fastboot mode...
After that, my Cubot Note 20 Pro is booting only in fastboot mode... until I flashed the stock recovery again.
Does anyone have any working solutions, suggestions other than waiting for an official TWRP? Thank you.
Edit:
I found this, I followed all the steps... but it stucked in TWRP logo... waited about 20 minutes... nothing... any solution please?! Thank you.
[MT6771][10]TWRP 3.4.0 Recovery for Cubot Note 20 Pro ~ Techswizz
This TWRP 3.4.0 Recovery For Cubot Note 20 Pro is working fully fine and can be used to flash custom ROMs and make full backups. Full touch is also working ok for easy navigation. For those who want to root by flashing SuperSu, this is a recommended custom recovery. Please find out more features...
www.techswizz.com
Hellera said:
Ok friends, I managed to unlock bootloader, get root... and I tried to port the stock recovery with Mediatek Auto TWRP Recovery Porter.
Then, I flashed vbmeta and recovery images in fastboot mode...
After that, my Cubot Note 20 Pro is booting only in fastboot mode... until I flashed the stock recovery again.
Does anyone have any working solutions, suggestions other than waiting for an official TWRP? Thank you.
Edit:
I found this, I followed all the steps... but it stucked in TWRP logo... waited about 20 minutes... nothing... any solution please?! Thank you.
[MT6771][10]TWRP 3.4.0 Recovery for Cubot Note 20 Pro ~ Techswizz
This TWRP 3.4.0 Recovery For Cubot Note 20 Pro is working fully fine and can be used to flash custom ROMs and make full backups. Full touch is also working ok for easy navigation. For those who want to root by flashing SuperSu, this is a recommended custom recovery. Please find out more features...
www.techswizz.com
Click to expand...
Click to collapse
You need to utilize the Hovatek forum.Its a Mediatek phone and they specialize in those phones.I know many of the standard processes we are accustomed to don't work.I have the same phone and with limited searching I was only able to find TWRP 3.4.0 but it freezes while in recovery.Im sure theres something out there more compatible
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
nalin_s3 said:
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
Click to expand...
Click to collapse
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Perseo99 said:
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Click to expand...
Click to collapse
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ??
nalin_s3 said:
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ?
Click to expand...
Click to collapse
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Can you check your pm??
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
jepoyxxv said:
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
Click to expand...
Click to collapse
I already went to 11 and flash to 3.11
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
jepoyxxv said:
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
Click to expand...
Click to collapse
If you are in 11 beta and want to downgrade..just simple flash global version and again flash 3.11 done
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
jepoyxxv said:
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
Click to expand...
Click to collapse
I just flash global from otg and tham again 3.11
walkwitmeinhel said:
I just flash global from otg and tham again 3.11
Click to expand...
Click to collapse
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
[email protected] said:
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
Click to expand...
Click to collapse
http://ui.nubia.cn/rom/detail/64
Oh! Didn't expect that. I just post this for Red Magic 3 device users. I don't know how RM3S actually works. Have you tried the unbrick tool from chinese version? Or just flashing the global rom from recovery is enough?
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
Let's see. Here is a link for Red Magic 3S unbrick tool. Download the non-eu ones.
If you have a Red Magic 3 with Red Magic 3s software, I will provide you the link to the other unbrick tool.
Also, you can try flashing the global rom from the stock recovery included in the package of the A11 rom that you have download.
Thanks for replying my bro.. my device is rm3s i already use rm3 and rm3s unbrick tool.. downloading fire hose programmer and image was successfully but.. my phone is still corrupted... And one thingg i dont have twrp install in my rm3s thats why its hard for me to fix it.. can you please guide or teach me how to flash stock recovery using global rom i know how to use cmd and adb
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
So then, It's not a problem of the unbrick tool, that is actually working properly. The thing is that you didn't know how to do a correct process to migrate from cm rom to global...
The first thing you should do is reboot the phone into fastboot mode (power+vol. Down). Then, connect the phone to the PC and type the next commands in the cmd:
Code:
fastboot devices
in order to see if your device is being recognized
Code:
fastboot oem nubia_unlock NUBIA_NX629J
to unlock the bootloader
Code:
fastboot flashing unlock
in order to make your phone able to boot with a modified software. In the moment you will enter this command, you will see a screen advising you about your data (it'll be erased once you accept to unlock flashing).
After that, you can reboot your phone, that will show you an screen advising you that the bootloader is open. Accept and continue without problems.
Tell me if you have been able to make your phone boot.
Perseo99 said:
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Click to expand...
Click to collapse
Required in CN A10 + twrp A10, or maybe from CN A9 + twrp A9 to be able to flash