Related
Hi everyone I first want to sincerely thank everyone that will answer to try to help me solve these problems with my nexus.
So the other day my nexus suddenly decided to stop being awesome and it started to be a pain in the ass instead.
When I turn it on it just keeps loading the booting animation of android 6 marshmallowand it never turn on. I identified this problem as a "bootloop" and i tried solving it anyway but it's being really hard and i'm almost getting no results.
I first tried with going into recovery mode. from the fastboot the recovery mode won't start, pops out a died android with a red triangle on it. Pressing volume up and power from that screen got me to another menu. I tried wiping the cache and wipe all the datas/ factory resets but no results. the crappy marshmallow animation goes on till forever.
On the screen that follow the dead android appears the error: E: failed to mount /cache (Invalid argument).
After that i tried with the famous sdk tools.
I am able to unlock the bootloader with the command [fastboot oem unlock]. however after unlocking it, if I turn the phone off and on again it auto lock itself.
i tried to flash a recovery image with the command [fastboot flash recovery recovery.img] but it won't flash. I unlock the device first, and then i try to flash the images. it says ok after the sending but on the writing says FAILED <remote: flash write failure>
same things happen flashing anything else (android factory images etc.)
I can't use adb, i d need to put the usb debugging mode from the developer options but since I coulnd't turn it on I don't know how to turn this option on.
So i discovered existed a "download mode"
Apparently for the nexus5 you have to push volume up and then connect it to the usb to enter in it. I tried many times and it just don't go to download mode (is this the correct procedure??)
I installed the last google divers, no results.
I really don't know what to do, do you guys have any ideas about how to save it?
phone details:
hammerhead d821(E) 32GB
hw version- rev 11
bootloader version: hhz12k
Cheers
Mattia
I think your emmc chip has gone bad and that is why you are getting locked bootloader everytime you reboot the phone as it is not able to hold any memory.
I suggest RMA if its in warranty
tiapnn said:
Hi everyone I first want to sincerely thank everyone that will answer to try to help me solve these problems with my nexus.
So the other day my nexus suddenly decided to stop being awesome and it started to be a pain in the ass instead.
When I turn it on it just keeps loading the booting animation of android 6 marshmallowand it never turn on. I identified this problem as a "bootloop" and i tried solving it anyway but it's being really hard and i'm almost getting no results.
I first tried with going into recovery mode. from the fastboot the recovery mode won't start, pops out a died android with a red triangle on it. Pressing volume up and power from that screen got me to another menu. I tried wiping the cache and wipe all the datas/ factory resets but no results. the crappy marshmallow animation goes on till forever.
On the screen that follow the dead android appears the error: E: failed to mount /cache (Invalid argument).
After that i tried with the famous sdk tools.
I am able to unlock the bootloader with the command [fastboot oem unlock]. however after unlocking it, if I turn the phone off and on again it auto lock itself.
i tried to flash a recovery image with the command [fastboot flash recovery recovery.img] but it won't flash. I unlock the device first, and then i try to flash the images. it says ok after the sending but on the writing says FAILED
same things happen flashing anything else (android factory images etc.)
I can't use adb, i d need to put the usb debugging mode from the developer options but since I coulnd't turn it on I don't know how to turn this option on.
So i discovered existed a "download mode"
Apparently for the nexus5 you have to push volume up and then connect it to the usb to enter in it. I tried many times and it just don't go to download mode (is this the correct procedure??)
I installed the last google divers, no results.
I really don't know what to do, do you guys have any ideas about how to save it?
phone details:
hammerhead d821(E) 32GB
hw version- rev 11
bootloader version: hhz12k
Cheers
Mattia
Click to expand...
Click to collapse
OK so ur ennc chip is NOT dead, that little Android with the triangle is stock recovery, which u can do nothing with, ur going to need a PC, preferably running ubuntu or some other form of Linux with adb and fastboot installed, i cam help with that too if u need it, once u get that settled what u need to do is this, download TWRP for ur hammerhead and rename it recovery.img, place it in a folder u have access to. Open a terminal and connect ur nexus to the pc with USB cable, and boot into bootloader. Then type this into the terminal:
cd (folder with recovery.img in it)
fastboot reboot bootloader (this should boot u back into bootloader if ur device is connected right)
fastboot flash recovery recovery.img
fastboot reboot recovery
This will boot u to TWRP in which u can perform a factory reset, if this doesn't work and ur still in a bootloop, download ur fav rom and gaps and flash it, this will take care of everything
And there is no download mode on the nexus that would be bootloader mode, so let me get this right, what system are u on, and did u try manually formatting with ADB? What happens when u do, I would force format cache, system, boot, and userdata and then flash recovery, that might work
Sent from my Nexus 6 using Tapatalk
After trying to flash Superuser-r275 and failing all the time. As a result of error called(No MD5 file were found). i found Super Su 2.79.
i flash my phone with it and then it boot and works perfectly except for one thing, i cannot open the Gallery or access the internal storage in any way. So i tried to get the phone to stock and i failed as im not able to get to the internal storage. so i reboot in recovery and then to bootloader and i put the command "fastboot reboot oem relock xxxxxxxxx" and press yes to lock bootloader and twrp will be removed. i selected yes and the phone reboot into huawei eRecovery mode and never Recover.
i still cant get access to the internal storage and i have lost twrp recovery.
there is any way to get it working again ?
malik11111 said:
After trying to flash Superuser-r275 and failing all the time. As a result of error called(No MD5 file were found). i found Super Su 2.79.
i flash my phone with it and then it boot and works perfectly except for one thing, i cannot open the Gallery or access the internal storage in any way. So i tried to get the phone to stock and i failed as im not able to get to the internal storage. so i reboot in recovery and then to bootloader and i put the command "fastboot reboot oem relock xxxxxxxxx" and press yes to lock bootloader and twrp will be removed. i selected yes and the phone reboot into huawei eRecovery mode and never Recover.
i still cant get access to the internal storage and i have lost twrp recovery.
there is any way to get it working again ?
Click to expand...
Click to collapse
sorry,by saying access internal storage u mean thru system or thru twrp?have u tried to unlock BL again n reflash twrp?
malik11111 said:
After trying to flash Superuser-r275 and failing all the time. As a result of error called(No MD5 file were found). i found Super Su 2.79.
i flash my phone with it and then it boot and works perfectly except for one thing, i cannot open the Gallery or access the internal storage in any way. So i tried to get the phone to stock and i failed as im not able to get to the internal storage. so i reboot in recovery and then to bootloader and i put the command "fastboot reboot oem relock xxxxxxxxx" and press yes to lock bootloader and twrp will be removed. i selected yes and the phone reboot into huawei eRecovery mode and never Recover.
i still cant get access to the internal storage and i have lost twrp recovery.
there is any way to get it working again ?
Click to expand...
Click to collapse
Unlock bootloader, flash stock recovery, relock bootloader. I don't see how this will help you get stock back though. Or do you mean you can't access download mode again?
Anyway, relocking bootloader won't make your phone stock.
And did you decrypt before flashing SuperSU (Format Data in Twrp)?
ante0 said:
Unlock bootloader, flash stock recovery, relock bootloader. I don't see how this will help you get stock back though. Or do you mean you can't access download mode again?
Anyway, relocking bootloader won't make your phone stock.
And did you decrypt before flashing SuperSU (Format Data in Twrp)?
Click to expand...
Click to collapse
first of all i cant access the internal storage from the operating system. or from a computer.
if i open Gallery or Music in my phone i would get a massage saying "insufficient storage free some space blah blah blah" and it take to clean memory. and if i try that through a computer it says that the devices has been disconnected or no is unavailable.
Secondly, how can i get to bootloader again? the device show up when i plug it to my computer but i can't see it in terminal when i use adb. there is a way to access the device in this situation ?
malik11111 said:
first of all i cant access the internal storage from the operating system. or from a computer.
if i open Gallery or Music in my phone i would get a massage saying "insufficient storage free some space blah blah blah" and it take to clean memory. and if i try that through a computer it says that the devices has been disconnected or no is unavailable.
Secondly, how can i get to bootloader again? the device show up when i plug it to my computer but i can't see it in terminal when i use adb. there is a way to access the device in this situation ?
Click to expand...
Click to collapse
if there is a way and i get the bootloader unlocked again, can someone explain how to "decrypt before flashing SuperSU (Format Data in Twrp)?"
Thank you guys.
malik11111 said:
first of all i cant access the internal storage from the operating system. or from a computer.
if i open Gallery or Music in my phone i would get a massage saying "insufficient storage free some space blah blah blah" and it take to clean memory. and if i try that through a computer it says that the devices has been disconnected or no is unavailable.
Secondly, how can i get to bootloader again? the device show up when i plug it to my computer but i can't see it in terminal when i use adb. there is a way to access the device in this situation ?
Click to expand...
Click to collapse
First (If you don't have Developer Settings in Settings) go to Settings - About and tap on Build Number a few times until it says "You're now a developer". Go back and tap on Developer settings and turn on usb debugging. Now see if adb wants to work. If it does use "adb reboot bootloader", else hold Vol Down + Power, release power when phone has rebooted and vibrated again. Download mode should display kind of instantly. Try if fastboot works.
For root, follow this: https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
i tried the to connect the phone to my computer and hold the power down. and i got into the bootloader mode but i could not flash twrp again or flash the phone to stock.. alos i found that FRP is locked. what to do in this case guys.
Enable oem unlock in developer settings, to disable FRP LOCKED in fastboot mode
the device does not boot at all
im stuck on the eRecovery page.
ok guys i have found a way out of the problem that i was stuck at, i open the phone through a an application called DC phoenix and i could boot the device
but now i would like to get my phone back to its stock Rom. how can i do that? i tried couple of different ways but i get error when it come to install the package|_type? any idea?
Please note that dc phonix has deleted the IMEI for the device and Serial Number
now i have like IMEI:000000000000 and serial number :0123456789ABCDE
please if anyone know a way let me know guys.
So I had an unlocked H8 with LOS. As I wanted to install EMUI, I put the proper restore Update.app into the dload folder and started Huawei's recovery. Everything went well, I formated data and wanted to install the EMUI 4.1 ROM using the same method.
Unfortunately my H8 is bootlooping and there is now way into erecovery nor any other recovery. It simply reboots on every single known vol up or down key pressing combination. The only thing I can go to is fastboot mode when holding down vol down and plugging in usb wire. But, it says frd locked and I can't install nor boot twrp. It's simply gone and reboots all the time.
Any hints? I can't even turn it off.
I wanted to give away that phone that's the reason. Last time I did it this way, I could flash the EMUI 4.1 since it's signed. But not this time.
Interesting part is, that although fastboot says frd locked, I still get the "phone unlocked" warning on every reboot. dload method isn't working, as it simply keeps rebooting.
It's my hardest brick so far I ever encountered
the same thing happened to me.....on my phone lock/unlocked frp and bootloader were tweaked for some reason(I mean that what was written wasn't the reality) so how did I fix it? I kept on to flash rollback package many times and I tried to unlock/relock bootloader again, at the end the phone let me to flash the firmware, I didn't know how but the phone allowed me to flash things throw recovery(using dload method). At the begin I only could access to erecovery and fastboot. I suppose that I broke system and data partition and while I looked/unlocked the bootloader, the wipe fixed the partition table. Sorry I'm tired and I know that my English sucks, I hope you understand what I have written.
How did you enter erecovery as this isn't working for me.... What did you flash over fastboot?
Have you tried flashing the firmware separately using adb on computer?
For this you just need to extract the Update.app using the firmware extractor for huawei. Then flash them individually using adb commands in cmd.
I can't access any state that would allow to do adb.
faeArai said:
How did you enter erecovery as this isn't working for me.... What did you flash over fastboot?
Click to expand...
Click to collapse
sorry. I'll try to explain better, however on Huawei/honor devices there are not one but two recoveries, so one is the normal recovery flashed in recovery partition, the second one is the Huawei recovery that is flashed in recovery2 partition, so if you didn't touch recovery2 partition, your erecovery is still there, now, if you press VOL+ VOL- and POWER it will reboot to recovery2 and it starts to flash something from dload in your sd card, so in my opinion you should do this things, first try this method to flash rollback package(this is the transition package from 7 to 6 and you will find it on honor site) if this is still not working try locking and unlocking again your bootloader(I hope this fix partitions of your device) then try to enter recovery and do a wipe and then boot your device, if this doesn't work flash rollback package(now it would work) and then flash an emui 4 full firmware image, always using dload method. trust me... I did the same... and it worked for me. let me know if it works for you :good:
faeArai said:
So I had an unlocked H8 with LOS. As I wanted to install EMUI, I put the proper restore Update.app into the dload folder and started Huawei's recovery. Everything went well, I formated data and wanted to install the EMUI 4.1 ROM using the same method.
Unfortunately my H8 is bootlooping and there is now way into erecovery nor any other recovery. It simply reboots on every single known vol up or down key pressing combination. The only thing I can go to is fastboot mode when holding down vol down and plugging in usb wire. But, it says frd locked and I can't install nor boot twrp. It's simply gone and reboots all the time.
Any hints? I can't even turn it off.
Click to expand...
Click to collapse
I ran into this issue not that long ago. What you have to do is relock your bootloader using ADB. The ADB commands and instructions can be found in this thread.
Just a FYI, do not use the links to the software listed in that thread as it is a little outdated. The method still works but the software will probably not work. Just be sure to get the most recent/appropriate version of SuperSU and TWRP via their official threads (This is if you want to re-root). There are Honor 8 specific TWRP files if I remember correctly, so be sure to check around the Honor 8 forums for the correct files.
A quick summary of what I did:
1) Power your phone off and then boot into fastboot by holding Vol down + Power; as soon as it boots up, plug your phone into your combuter via your usb cord.
2) With ADB running, type:
Code:
fastboot oem relock [COLOR="LightBlue"]################[/COLOR]
NOTE: The '#' should be replaced with your unique unlock code that you obtained to unlock your bootloader.
3) Wait for it to format and reset your phone and go through the setup. BE SURE TO BYPASS all google registration; skip everything you can to get into the phone itself. If you do register, it will reactivate FRP and you'll have to start over again.
4) Turn on USB Debugging and every other setting that enables developer administrative navigation and control just to be safe. USB Debugging being the most important one, though.
5) Restart your phone and boot into fastboot again using Vol down + Power.
6) Unlock your phone again with:
Code:
fastboot oem unlock [COLOR="LightBlue"]################[/COLOR]
7) Once the command is entered, it'll reset your phone once more and - as stated before - bypass/skip all google (FRP) registration.
8) Enable developer options and USB debugging again and make sure that OEM Unlocked is checked and grayed out.
9) Reboot into fastboot mode to confirm that FRP is disabled and you should be able to install TWRP now via ADB.
@Numerics thanks. The thing is, that I can't boot anything. I can't even go into eRecovery. Nor can I flash a stock EMUI 4.1. It just boot loops all the time and I can only access fastboot.
If you can flash twrp..........Install los or other Rom ..................Go back to stock.......you must flash b360 ober adb...... because los is 7.1...............if you on b360 you can usw the rollback for emui 4.1........,..............sry for bad english
I can easily go to fastboot. But I can't flash anything. I extracted the img from the update.app but can't flash. It simply says that it's not permitted.
faeArai said:
I can easily go to fastboot. But I can't flash anything. I extracted the img from the update.app but can't flash. It simply says that it's not permitted.
Click to expand...
Click to collapse
With my method, you don't need to flash anything. Just relock your bootloader via adb in fastboot mode and let it reset. Unless I'm not understanding your issue entirely.
@Numerics as I said, in won't boot anything as it is constantly boot looping. There is no way to access any kind of recovery nor erecovery. There is no boot into Android. The only thing accessible right now is fast boot (which is not ADB). But even in fast boot I can't do anything als operations are not permitted.
after boot looping and starting fast boot mode, I can see a "Android reboot reason" section saying:
AP_S_PANIC
data is invalid
There is still a lineageos installed on system as firmware but as I tried to get rid of it by going back to stock EMUI, I guess Huawei's rollback did something wrong and killed recovery (although I did it in the past successfully).
I tried to run HiSuite to recover my phone, but it just says, that my phone is not supported.
Speaking of this, Huawei messed up with that whole fastboot locking bull****.
faeArai said:
@Numerics as I said, in won't boot anything as it is constantly boot looping. There is no way to access any kind of recovery nor erecovery. There is no boot into Android. The only thing accessible right now is fast boot (which is not ADB). But even in fast boot I can't do anything als operations are not permitted.
after boot looping and starting fast boot mode, I can see a "Android reboot reason" section saying:
AP_S_PANIC
data is invalid
There is still a lineageos installed on system as firmware but as I tried to get rid of it by going back to stock EMUI, I guess Huawei's rollback did something wrong and killed recovery (although I did it in the past successfully).
I tried to run HiSuite to recover my phone, but it just says, that my phone is not supported.
Speaking of this, Huawei messed up with that whole fastboot locking bull****.
Click to expand...
Click to collapse
No, I know ADB isn't Fastboot. What I'm trying to say is that you should be able to still run ADB via CMD on Windows when you're in fastboot mode to relock your bootloader with the directions I gave in my previous post. It'll force-restore your phone to a non-bricked/vanilla state. At least that is how I fixed mine.
Like... You can't even try using the 'fastboot oem relock ################' function via the ADB console while in fastboot?
yes boy trust us, you haven't a working OS so it is a normal thing that your phone reboot, you cannot access to recovery because some partitions are corrupted (data partition) , so these are the steps that could help you:
1) using fastboot, relock your boot loader
2)using fastboot, unlock your boot loader (partition table would be ok now, and you would be able to use load method to flash things trow stock recovery)
4)put inside your sd card \dload\update.app(use rollback package)
3) press all the buttons while your device is rebooting(do this before the blue screen logo appear), your phone is now looking for something inside your sd card
5) if the next step doesn't work do a factory reset from recovery that now would be working
6) put inside your sd card a full android 6 (emus 4) update.app and pressing all buttons it will install the firmware
7) your device now is locked and back to stock, maybe without cust partition or maybe in test mode but it is certainly alive
8) do a factory reset and reinstall the firmware
9) your phone is now ok
You don't lock the bootloader via ADB but via fastboot.
As I said, northing was restored and nothing is booting and I can't unlock my bootloader again. As I said, recovery is not working so the file in dload is not loaded and used. Which is strange.
Locking bootloader didn't do anything besides locking the bootloader. Device is still dead and I still can only access fastboot.
faeArai said:
You don't lock the bootloader via ADB but via fastboot.
As I said, northing was restored and nothing is booting and I can't unlock my bootloader again. As I said, recovery is not working so the file in dload is not loaded and used. Which is strange.
Locking bootloader didn't do anything besides locking the bootloader. Device is still dead and I still can only access fastboot.
Click to expand...
Click to collapse
Which model do u own?
Sent from my Honor 8 using XDA Labs
The European one.
faeArai said:
You don't lock the bootloader via ADB but via fastboot.
As I said, northing was restored and nothing is booting and I can't unlock my bootloader again. As I said, recovery is not working so the file in dload is not loaded and used. Which is strange.
Locking bootloader didn't do anything besides locking the bootloader. Device is still dead and I still can only access fastboot.
Click to expand...
Click to collapse
This is not the truth.....locking bootloader will erase all your data and fix partitions....and with fixed partition you can access to recovery ......trust me the only thing that you can do is to lock your bootloader......you can't flash anything from fastboot and boot recovery or system now...... lock your bootloader and then unlock it again, try using "fastboot OEM lock *****" or "fastboot OEM relock *******" (try cmd runned as admin, people say that this makes the difference) then unlock your device again and .....magic your recovery will boot......the same thing happened to me and I fixed my phone using this trick, however, even if you had frp unlocked it would say you that isn't possible to write anything because you broke some partition, and that's the reason why you can't boot recovery, wait one second and think: why doesn't my recovery boot?
It has nothing to do with trust. I did it and device is still a full stone brick. Nothing changed by locking the bootloader besides that now I can't unlock the bootloader anymore.
Hello there,
i had an camera issue on my Honor 6x (EMUI 5 B369), thats why I made a Rollback to EMUI 4(B130). After doing that properly with that files:
http://download-c.huawei.com/download/downloadCenter?downloadId=94070&version=376169&siteCode=de-h From Bxxx to B300 (only contains some .img (See Attachment))
and http://download-c.huawei.com/download/downloadCenter?downloadId=94087&version=376224&siteCode=de-h From B300 to B130 (full Update.app)
After being on EMUI 4, I wanted to dload back to B369, but then I accidentally flashed the B300, which only contained some .img.
Then it went into softbrick mode, so I only was able to boot into fastboot.
To flash anything I unlocked the bootloader. The Device turned off and back on, then wanted to boot to recovery for hard reset.
This is where I am now. I can not boot into any mode. It just turns on and then shows the "Your device has been unlocked and cant be trusted". I tried to go into dload mode, tried recovery, tried fastboot, none of them were working.
When force rebooting it just turns on, vibrates 2 times and shows that "Your device..." screen and "Your device is booting now"
To archieve that it forgets that process to boot into recovery i let the battery drain empty and try again, which partly worked. Now sometimes it doesnt show "Your device is booting now" on the "Your device..." screen, but it shows the three options that are normally shown when turning on with opened bootloader.
But still no success into fastboot etc.
Edit: My phone seems to be not charging anymore, because ist shows that booting stuff, but then turns on and shows the "Your device..."-screen
Is there any way to unbrick my Honor 6X BLN-L21C432?
Greetings, LRX
PS: plss help me
I didn't understood a thing; actually, you have access to fastboot mode or not? And if yes, what's the status of FRP and Phone in fastboot... Lock or unlocked?
Try to go in fastboot mode by pressing the volume down + power on buttons while your phone is connected to a PC USB port. If this shouldn't work, i had read something online that says that there is a chance to flash an image through HiSuite; never tested, so i can't ensure that it'll works... But we'll try to find out a way to unbrick your device
:crying: same problem shows on my mobile if you found any solution please share with me my device also in same state
same here ... my BLN-L21 is bricked. Can't access to recovery, no fastboot, no e-recovery. any connection with PC !
I have disassembled the phone and looking for schematic testpoint but no result for now
---------- Post added at 10:44 AM ---------- Previous post was at 10:41 AM ----------
LRX22G said:
Hello there,
i had an camera issue on my Honor 6x (EMUI 5 B369), thats why I made a Rollback to EMUI 4(B130). After doing that properly with that files:
http://download-c.huawei.com/download/downloadCenter?downloadId=94070&version=376169&siteCode=de-h From Bxxx to B300 (only contains some .img (See Attachment))
and http://download-c.huawei.com/download/downloadCenter?downloadId=94087&version=376224&siteCode=de-h From B300 to B130 (full Update.app)
After being on EMUI 4, I wanted to dload back to B369, but then I accidentally flashed the B300, which only contained some .img.
Then it went into softbrick mode, so I only was able to boot into fastboot.
To flash anything I unlocked the bootloader. The Device turned off and back on, then wanted to boot to recovery for hard reset.
This is where I am now. I can not boot into any mode. It just turns on and then shows the "Your device has been unlocked and cant be trusted". I tried to go into dload mode, tried recovery, tried fastboot, none of them were working.
When force rebooting it just turns on, vibrates 2 times and shows that "Your device..." screen and "Your device is booting now"
To archieve that it forgets that process to boot into recovery i let the battery drain empty and try again, which partly worked. Now sometimes it doesnt show "Your device is booting now" on the "Your device..." screen, but it shows the three options that are normally shown when turning on with opened bootloader.
But still no success into fastboot etc.
Edit: My phone seems to be not charging anymore, because ist shows that booting stuff, but then turns on and shows the "Your device..."-screen
Is there any way to unbrick my Honor 6X BLN-L21C432?
Greetings, LRX
PS: plss help me
Click to expand...
Click to collapse
Do yo have the red light ? and red charging logo before boot ? I have charge my battery yesterday out of phone (to see if out of battery change boot option). And try boot fastboot / recovery / erecovery with plug and replug battery but no success. Still same
Try to boot into fastboot mode. If you disconnected phone battery, connect it again. Unplug the phone from USB cable. When powered off, hold Vol down key (and only hold that key), then plug your phone to your computer (be sure to hold Vol down until you reach fastboot screen).
If you reached fastboot mode, then flash the RECOVERY.img image from B130 to the recovery partition.
If successful, unplug your device, then reboot.
When rebooting, hold Vol Up and Power button until you see the boot warning saying that you're booting to recovery mode or something like that (the screen won't show any other options to boot as a regular boot should, so that will be an important indicator).
If you reach the recovery screen, then try to dload full B130 firmware.
If this fail, try another flashing combinations. I mean:
1- Try dloading another firmware (e.g. the B369 firmware you downloaded) over B130 recovery.
2- If step 1 failed, flash B369 RECOVERY.img, then try to dload B130 package. If this don't work, now try to dload B369.
3- If previous steps failed, try to flash RECOVERY.img from THE DOWNGRADING PACKAGE (the one with few IMGs). After that, dload B130.
If this don't work, is because your soft brick is a real pain in the ass.
Cheers, and good luck.
PS: don't miss your hope. I achieved to recover my bricked phone with FRP locked (FRP doesn't let you flash anything at all), and a warning screen with RED letters, and a big exclamation mark, saying that the phone was not able to boot.
try dloading the correct firmware.dload works most of the time.
there is no way to enter in dload, recovery or fastboot. i try all methods but no luck. please is here any one know that can we access flash IC?
Ounly one possibility is using "testpoint" on motherboard mobile (Huawei USB COM 1.0 port in PC) with DC Phoenix and than HCU (19€). I had the same problem , I have repared it
1. Unbrick tutorial: you can find it on webside dc-unlocker ((ALL new users prevented from posting outside links in their messages)
2. Repair oeminfo and custom.bin tutorial: you can find it on webside hcu-client (ALL new users prevented from posting outside links in their messages)
I have the picture Testpoint Honor 6x BLN-L21.jpg
Send mi private message.
Good luck...
power off the device hold the vol down connect data cable to pc it will show fastboot then flash twrp then reboot to twrp flash custom rom.
Impossible to reboot to TWRP from fastboot...
- Install russian MultiTool 8
- download rollback package (Android 6, EMUI 4.1, 1.76GB ) then extract dload folder into SD Card and put sd-card in phone
- Connect USB cable to PC, power off phone, keep pressed Vol- then plug USB cable, phone start in Fastboot Mode
- From MultiTool flash Recovery and eRecovery 1.x version
- Power off phone
- Reboot pressing Vol+,Vol-, Power and wait...
I was able to get the device rooted with the magisk boot image patch method, but I was seeing if I can get twrp?
turboperson123 said:
I was able to get the device rooted with the magisk boot image patch method, but I was seeing if I can get twrp?
Click to expand...
Click to collapse
Could you link me to the method you used for root please?
Sent from my God Mode 8
Hi
I'm highly interested too. Could you share the method please?
Do you manage to install twrp?
Thanks!
Hello,
How do you do to unlock bootloader.I was able to download and patch with magisk the last ROM but I can't flash it !
Please would you tell us how you do that ?
Thanks
here is the link https://forum.xda-developers.com/ge...agisk-root-t3992477/post80692227#post80692227
Thank you !
go to settings and enable developer options, then go to developer options / enable usb debugging and enable oem unlock
then on pc if you have adb and fastboot installed then type adb reboot bootloader
then once the tablet is in fastboot type fastboot oem unlock-go to unlock the bootloader
TWRP 3.3.1-0 TB-X605F Lenovo Smart Tab M10
i used the twrp port from stock recovery method here https://forum.xda-developers.com/android/general/guide-porting-twrp-source-t3843473
"warning this will wipe data, bootloader needs to be unlocked, computer has adb and fastboot installed"
1. download twrp from here http://www.mediafire.com/file/tn7csi4gzm91w7v/twrp-3.3.1-0-X605F.img/file
2. then on the tablet go to settings / Developer mode / usb debugging
3. connect the tablet to pc with usb cable then on the tablet you will see usb debugging authorizations, click on allow always to make the device debuggable
4. on pc launch command prompt then type "adb reboot bootloader" to reboot into bootloader
5. once in bootloader type "fastboot flash recovery "the directory of the twrp-recovery.img" once flashed then type "fastboot reboot"
6. once tablet rebooted type "adb reboot recovery" on pc to reboot into recovery, warning you will see /data mounting errors to fix this on the tablet go to wipe / format data and type yes to format data, then go back to main screen then go to reboot / recovery to reboot back into recovery.
7. on pc download dm-verity-forceencryption zip file here http://www.mediafire.com/file/ndhe4ewlzlffdur/Disable-dm-verity-forceencryption.zip/file then on the tablet go to advanced / adb sideload then swipe it, then on pc type "adb sideload the directory where you put the zip file" once flashed then go to the main screen then go to reboot / system to reboot system
then it should boot up.
Working fine from my side
Turbo, many Thanks!
It works perfectly ! ?
turboperson123 said:
i used the twrp port from stock recovery method here https://forum.xda-developers.com/android/general/guide-porting-twrp-source-t3843473
"warning this will wipe data, bootloader needs to be unlocked, computer has adb and fastboot installed"
1. download twrp from here http://www.mediafire.com/file/tn7csi4gzm91w7v/twrp-3.3.1-0-X605F.img/file
2. then on the tablet go to settings / Developer mode / usb debugging
3. connect the tablet to pc with usb cable then on the tablet you will see usb debugging authorizations, click on allow always to make the device debuggable
4. on pc launch command prompt then type "adb reboot bootloader" to reboot into bootloader
5. once in bootloader type "fastboot flash recovery "the directory of the twrp-recovery.img" once flashed then type "fastboot reboot"
6. once tablet rebooted type "adb reboot recovery" on pc to reboot into recovery, warning you will see /data mounting errors to fix this on the tablet go to wipe / format data and type yes to format data, then go back to main screen then go to reboot / recovery to reboot back into recovery.
7. on pc download dm-verity-forceencryption zip file here http://www.mediafire.com/file/ndhe4ewlzlffdur/Disable-dm-verity-forceencryption.zip/file then on the tablet go to advanced / adb sideload then swipe it, then on pc type "adb sideload the directory where you put the zip file" once flashed then go to the main screen then go to reboot / system to reboot system
then it should boot up.
Click to expand...
Click to collapse
Good job, @turboperson123 ! @Monpseud0 pointed me over here.
I've got some time this week & I'm going to start on a version that will handle encryption. You can find the device tree and code here. I've included a link to this thread.
I bricked my device. Rebooting the system from TWRP only gets me back into TWRP.
Am afraid I will have to flash a new rom.
Does anyone know where to download a working rom for TB-X065F
Help much appreciated.
stefankkl said:
I bricked my device. Rebooting the system from TWRP only gets me back into TWRP.
Am afraid I will have to flash a new rom.
Does anyone know where to download a working rom for TB-X065F
Help much appreciated.
Click to expand...
Click to collapse
Easiest thing to do is use LMSA. It's available on Lenovo's support page: https://pcsupport.lenovo.com/au/en/...r-list/component?name=Software and Utilities.
Still unable to re-flash stock ROM
Yahoo Mike said:
Easiest thing to do is use LMSA. It's available on Lenovo's support page:
Click to expand...
Click to collapse
I can download the ROM through LMSA, but not flash it.
Trying to do so yields a "complete" message from LMSA after only a few seconds, but then rebooting the device only gets me back into TWRP.
I also tried to flash all system_xx.img from the ROM using fastboot flash system system_xx.img ,
and to flash all vendor_xx.img from the ROM using fastboot flash vendor vendor_xx.img.
Fastboot performs this operation, but then rebooting gets me back into TWRP again.
Trying to reboot the system from TWRP yields the message "no system installed"
Help much appreciated.
stefankkl said:
I can download the ROM through LMSA, but not flash it.
Trying to do so yields a "complete" message from LMSA after only a few seconds, but then rebooting the device only gets me back into TWRP.
I also tried to flash all system_xx.img from the ROM using fastboot flash system system_xx.img ,
and to flash all vendor_xx.img from the ROM using fastboot flash vendor vendor_xx.img.
Fastboot performs this operation, but then rebooting gets me back into TWRP again.
Trying to reboot the system from TWRP yields the message "no system installed"
Help much appreciated.
Click to expand...
Click to collapse
Tough one! Try this. It will wipe your data partition, though.
If it will let you, power down the tablet for about 10mins. Then boot into TWRP. Go to "Wipe" and swipe for Data/Factory Reset. Reboot.
If the M10 still won't boot, in TWRP re-format Data (by typing 'yes' under Wipe->Format Data), and wipe cache and Dalvik Cache. I think dalvik is under Wipe->Advanced. Factory reset again. Reboot.
As an absolute last resort, you might try fixing permissions in TWRP under "Advanced". But I don't think that's going to do much, because you haven't booted the ROM successfully yet.
Hope one of these works for you. Let us know what worked for you. If nothing works, PM me and we'll try some other things.
Lenovo Logo THEN black screen -- DEAD
turboperson123 said:
6. once tablet rebooted type "adb reboot recovery" on pc to reboot into recovery, warning you will see /data mounting errors to fix this on the tablet go to wipe / format data and type yes to format data, then go back to main screen then go to reboot / recovery to reboot back into recovery.
7. on pc download dm-verity-forceencryption zip file here then on the tablet go to advanced / adb sideload then swipe it, then on pc type "adb sideload the directory where you put the zip file" once flashed then go to the main screen then go to reboot / system to reboot system
then it should boot up.
Click to expand...
Click to collapse
I followed the instructions but on the last step of rebooting to system the device restarts, shows the Lenovo logo then it goes to a black / blanks screen. It appears to have shut down. I must hold the power button for several seconds before it wakes up (or restarts?) and does this all over again -- shows the Lenovo logo then black screen.
For the record the device was already rooted with Magisk. I was just trying to do a TWRP backup but found /data mounting errors so tried following steps 6 & 7. At the moment the device refuses to boot up. I am unable to get back into Recovery Mode. The ONLY thing i can do is get into FASTBOOT mode and issue commands from CLI.
The following hardware key combos produce the same results -- tablet turns on to show the Lenovo logo, after a few seconds the screen goes black (the device appears to have turned off):
x Power key
x Power Key + Volume Down
x Power Key + Volume Up
x Power Key + Volume Up + Volume Down
** Release of keys is done once Lenovo logo appears
Any ideas?
UPDATE
I went ahead and performed: fastboot flash boot boot.img << the boot.img was the earlier patched magisk image i used to get the rooted working tablet.
After performing the above the tablet turned on and is now showing the Lenovo logo however it does nothing else --- it remains on the logo forever. I am able to get into TWRP recovery. I went ahead and wiped Dalvik, Cache, and Data. Rebooted to System but still it is stuck on the Lenovo Logo.
The device if fully charged.
crosis99 said:
I followed the instructions but on the last step of rebooting to system the device restarts, shows the Lenovo logo then it goes to a black / blanks screen. It appears to have shut down. I must hold the power button for several seconds before it wakes up (or restarts?) and does this all over again -- shows the Lenovo logo then black screen.
Any ideas?
Click to expand...
Click to collapse
You could try recovering the tablet with LMSA. See this post. You'll lose all your existing data and setup on the tablet, though.
Not sure what went wrong for you. Do you have a TB-X605F with Snapdragon 450 SOC? The existing TWRP is only for the SDA450. I'm working on one for the M10s with SDA429.
Yahoo Mike said:
You could try recovering the tablet with LMSA. See this post. You'll lose all your existing data and setup on the tablet, though.
Not sure what went wrong for you. Do you have a TB-X605F with Snapdragon 450 SOC? The existing TWRP is only for the SDA450. I'm working on one for the M10s with SDA429.
Click to expand...
Click to collapse
Thanks for the response. Yes mine has the Snapdragon 450. I will investigate the LMSA. Been messing around all day but made no progress -- not even QPST is working out.