Database Info

Reverting Back to Stock Rom in Honor 4X(MSM8916)

Hi this is a thread for new users to revert back to stock rom in huawei Honor 4x from their custom roms .
Follow these steps only if have unlocked your bootloader and had custom rom installed already. Of course you must have already installed custom recovery (twrp or cwm). This guide will also allow you to revert back to stock huawei recovery.
Step 1 : Download the ROM Package from the link~1GB)
http://www.huaweidevice.co.in/Downloads/Cherry-L04-V100R001C900B126.rar
Step2 : Extract using Winrar. (Inside dload folder you will find Update.app file)
Step3 :Now Download Huawei Update extractor and install
http://cn.club.vmall.com/thread-3239393-1-1.html
Step4 : Now Run the huawei update extractor and point to the update.app file.Now the contents of the update.app file will be displayed.
Select the Boot.img,recovery.img and System.img alone and select extract by rightclicking it.
Step5:Now we need the adb tool kit, .(~10mb)
https://drive.google.com/file/d/0B8CpdMmTiXaVdS1Eam5RY3BVR3c/view?pli=1
Step6:
Install and configure the Adb. Make sure once installed connect the device to usb and press vol down + Power button together.It will enter fastboot mode. Make sure phone is unlocked.
Step7:Now copy the extracted recovery.img,system.img and boot. img to the adb root folder which should be in c:\adb\.
Step8: Now in terminal window of adb , type these
1. "adb devices" -Displays some id of your device which makes sure your device is connected.
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Step9:Now all is flashed.
"adb reboot" - Reboots your device.
Step10:Wait for few mins and your phone reboots into stock emui rom. Now if you want the second emui update. Download from hihonour.in and flash the downloaded zip with stock recovery.
Credits
All the software makers.
All the Xda members,Xda team ,Xda Posts.
Important Note
I'm not responsible for your phone getting bricked or whatever things could happen to your Device.
I am always ready to support for Huawei Honor 4x custom rom developments. PLs lets join together and make many custom roms for our device.

put dload in sdcard
press volume +,-,power
everything will start

Hi I suppose only if we have stock recovery , it will work ?!.
Sent from my Che1-L04 using XDA Free mobile app

awesome
I think you've done great job here
Thank you

after flashing the old firmware's files i got no boot and i dont mean bootloop i mean phone is not booting at all just stopped at the first screen
is there any solution

I did everything you mentioned but in adb devices its showing No devices found. I forgot to turn on usb debugging. What to do now. Its struck on the window Fastboot and rescue mode.
---------- Post added at 02:11 PM ---------- Previous post was at 02:04 PM ----------
Hey Huawei. I contacted you earlier for the bootloader unlock key and got the same from you which I would Like to thank yOu for same. After unlocking bootloader I installed MIUI ROM on my Honor 4x (Che1-l04) and it ran smoothly. But I didn't like it much and wanted to change back to my stock ROM. I tried to Install your Honor 4x Android L. I extracted the ZIP file using Huawei Update extractor and did the steps mentioned by XDA Developers. Here- http://forum.xda-developers.com/android/development/reverting-to-stock-rom-honor-4xmsm8916-t3168732
After doing All steps While doing ''adb reboot'' Its saying DEVICE NOT FOUND in cmd. I Found that i forgot to turn on USB debugging. But now my device is struck on FASTBOOT AND RESCUE MODE.(PHONE UNLOCKED).I am not able to tur it on. I tried many steps to show my device but failed. Please help me regarding this. I will be highly thankful to you

Beware!
This tutorial seems to be written very sloppy and doesn't work at all. (at least not on a CHE2-11)
After entering fastboot mode no adb commands will work.
"adb boot" must be replaced by fastboot reboot.
After applying your changes however my pone hangs at the first screen (showing "honor")

I've the same problem than you tosho1. And the adb commands not work in bootloader/fastboot mode. Only in recovery and system

some issuses
when i extract the recovery, boot and system.img files from the UPDATE.APP file with the Update Extractor tool, it creates 6 files instead of 3:
1. BOOT.img
2. BOOT.img.header
3. RECOVERY.img
4. RECOVERY.img.header
5. SYSTEM.img
6. SYSTEM.img.header
What is the purpose of the file which ends with ".header" extension ?

praveen1988 said:
Hi this is a thread for new users to revert back to stock rom in huawei Honor 4x from their custom roms .
Follow these steps only if have unlocked your bootloader and had custom rom installed already. Of course you must have already installed custom recovery (twrp or cwm). This guide will also allow you to revert back to stock huawei recovery.
Step 1 : Download the ROM Package from the link~1GB)
http://www.huaweidevice.co.in/Downloads/Cherry-L04-V100R001C900B126.rar
Step2 : Extract using Winrar. (Inside dload folder you will find Update.app file)
Step3 :Now Download Huawei Update extractor and install
http://cn.club.vmall.com/thread-3239393-1-1.html
Step4 : Now Run the huawei update extractor and point to the update.app file.Now the contents of the update.app file will be displayed.
Select the Boot.img,recovery.img and System.img alone and select extract by rightclicking it.
Step5:Now we need the adb tool kit, .(~10mb)
https://drive.google.com/file/d/0B8CpdMmTiXaVdS1Eam5RY3BVR3c/view?pli=1
Step6:
Install and configure the Adb. Make sure once installed connect the device to usb and press vol down + Power button together.It will enter fastboot mode. Make sure phone is unlocked.
Step7:Now copy the extracted recovery.img,system.img and boot. img to the adb root folder which should be in c:\adb\.
Step8: Now in terminal window of adb , type these
1. "adb devices" -Displays some id of your device which makes sure your device is connected.
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Step9:Now all is flashed.
"adb reboot" - Reboots your device.
Step10:Wait for few mins and your phone reboots into stock emui rom. Now if you want the second emui update. Download from hihonour.in and flash the downloaded zip with stock recovery.
Credits
All the software makers.
All the Xda members,Xda team ,Xda Posts.
Important Note
I'm not responsible for your phone getting bricked or whatever things could happen to your Device.
I am always ready to support for Huawei Honor 4x custom rom developments. PLs lets join together and make many custom roms for our device.
Click to expand...
Click to collapse
In case, anyone wants to know how to downgrade from Marshmallow to kitkat on honor 4x. Refer this thread: http://forum.xda-developers.com/honor-4x/help/provide-downgrade-procedure-emui-4-0-to-t3409717/page2
Solution is given on Page 2. Also, you cannot downgrade to 4.4.4 directly from 6.0.1. You need to go from 6.0 to 5.1 and then 4.4.4. For details refer the link.

In honor 4c i unloked bootloader and rooted my device no twrp installed when i flashed twrp file i struck at honor logo......
Can anyone resolve it plz......

pls help!!
does this work on locked bootloader?? any posssibility? i flashed twrp and it ended in loop gained root access throuh king root what to do??:crying:

pl suggest I am facing the same problem, error shows while flashing that ( remote data is too large)- I have updated the fastboot binaries but no success... Help me out pLease

i am not able to flash recovery and boot,getting a error "remote:size too large".What to do??

not working
Huawei update extractor stucks while extraction boot.img
any fix

Does not work
dianlujitao said:
put dload in sdcard
press volume +,-,power
everything will start
Click to expand...
Click to collapse
It does not work in my case. Could you please help.

praveen1988 said:
Step8: Now in terminal window of adb , type these
1. "adb devices" -Displays some id of your device which makes sure your device is connected.
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Click to expand...
Click to collapse
It actually worked for me ( I messed up with custo roms). Now i'm back to stock. Thanks!
P.S. Honor 6x

dianlujitao said:
put dload in sdcard
press volume +,-,power
everything will start
Click to expand...
Click to collapse
i stuck on the huawei recovery mode around 90% . Wait for 3 hours and more also stuck on 90%.
Please help

How can be unlock honor che-L04 if there is invalid imei in the phone
Sent from my Redmi 3S using Tapatalk
---------- Post added at 03:49 PM ---------- Previous post was at 03:40 PM ----------
How to unlock honor Che1-L04 if there is no imei in stock rom installed in phone by huawei smartphone multi-download software v1002
Sent from my Redmi 3S using Tapatalk

I cant install the adb tool ki. it keeps closing

k4 note bootloader unlock and twrp

K4 Note marshmallow version working fine with this method used(fingerprint works fine,xposed is there,Rooted) no bug found until now
Check it here
https://youtu.be/f4kfvGkoMOk
Rather than saying the method didn't worked please comment with error or problem you are facing
##if you get blank screen or phone again reboots to stock recovery,then do this enable oem unlock again in dev. Settings. This phone's Lollipop stock system sometimes relocks the bootloader by itself. Check it by entering this command in fastboot "fastboot getvar all" in end it will show if it is unlocked or not
+if it shows unlocked and phone on booting to recovery shows blank screen or bootloops
Do this go in sp flash tool
Select scatter file from extracted folder in patch and tick preloader file .get into advance mode of flash tool in write memory option select the recovery.by.gursewak.img file from recovery folder in file path. Change begin address to 0x2d80000 and region is EMMC_USER And click write and connect switched off phone to pc. After success .reboot the phone.
***All files are moved here permanently the links were removed due to file host was not allowed on xda .it was not due to any other reason as told by the spoiler***
All files here
http://its10.wapka.me/site_1.xhtml
***Heres the video link
Files linked above
Updated files
Recovery+bootloader unlock
Files linked above
Stk-
Files linked above
Flash tool-
Files linked above***
METHOD FOR LENOVO K4 NOTE OR A7010A48 (3GB RAM+16GB ROM VERSION ONLY)(Will work on lollipop as well marshmallow )
#there are 2 methods told to flash recovery please try second method if first don't work
#Important:-On lollipop version fingerprint will not work with twrp installed (trying to sort it out) . solution given in video.
[DON'T TRY ON ANY OTHER VARIANT OTHER THAN MENTIONED ABOVE IT MAY BRICK YOUR PHONE I AM NOT RESPONSIBLE FOR THIS]
NOTE1:IF SOMEONE IS HELPING YOU, DON'T TRY TO HURT HIS FEELINGS. I WILL NOT GET ANY PRIZE OR SALARY FOR THIS
THIS METHOD HAS BEEN SUCCESSFULLY TESTED ON 3 LENOVO K4 NOTE HANDSETS WITH 100% SUCCESS RATE SO NO CHANCES OF FAILURE.
ALSO READ POST#2 AND POST#3 FOR MORE HELP
NOTE2:THE FILES EXCEPT RECOVERY(WHICH HAD TO BE MODIFIED TO WORK WITH K4) HAS NOTHING TO DEAL WITH RUSSIAN FORUM.(IF YOU THINK SO ,JUST DOWNLOAD THAT FILES ALSO FROM THAT RUSSIAN FORUM AND TRY TO FLASH THEM AT YOUR RISK AND IF YOUR PHONE BOOTS UP WITH THAT RUSSIAN FILES I GUARANTEE I WILL REMOVE THIS POST.)
Files in above link sorry again for clearity but you may check its uploaded on 27-3-16 i.e. before making this thread
I never post without testing more than once
MOREOVER THE FILES TO BE FLASHED ARE CREATED BY LENOVO SOURCE CODE FOR K4 NOTE SO NO CHANCES OF BRICKING. IT WILL SURELY WORK.
I WILL NOT FORCE YOU TO TRY THIS METHOD BUT I GUARANTEE IT WILL WORK BUT DON'T SPAM THE THREAD BY SAYING "THESE FILES ARE RUSSIAN FORUM FILES"," YOU SHOULD HAVE TRIED ON YOUR PHONE BEFORE POSTING" FOR THAT PEOPLE I WILL SAY JUST STAY AWAY FROM THIS THREAD
hello friends
lenovo k4 note's bootloader unlock for lollipop version is successful. iam sharing the procedure for this but please do as i says or i am not responsible for any bootloop or anything happening to your phone.
WARNING:USERDATA WILL BE ERASED***
ok heres the process
requirement-
SP flash tool(already present in stock rom file) or get it here(Recommended)
File linked above
lenovo k4 note zip file by gursewak.10 get it here File linked above
and extract in a drive in your pc
ok switch off the phone
(1) open sp flash tool
load scatter file from the folder 'patch' in extracted folder provided
tick preloader file if there is no preloader file showing in there select the file preloader file(preloader.bin) from 'patch' folder.
ok flash it to your phone
disconnect it after flash tool showing download ok
don't switch on
(2) now press ctrl+alt+v to get sp flash tool in advanced mode
ok click option window in flash tool tick write memory.
tick the preloader file
go to write memory option
click file path and select uboot.bin file from folder 'patch'.
select begin address and write this address there 0x1c80000
region should be EMMC_USER
click write memory and connect switched off phone to pc
after showing write memory ok message disconnect mobile
(3) ok switch on the phone by pressing both vol. buttons untill stock recovery appears
erase user data here and reboot
after fully bootup
go to phone settings>>developer settings(if doesn't appears goto settings>>about phone>>device information >>tap build number untill it shows "now you are a developer"
enable developer options
enable oem unlocking
enable usb debugging
(4) connect to pc
click unlock_recovery.bat file in extracted folder
>>also at one time phone will ask to unlock the bootloader ,confirm by pressing volume +
>>watch the command prompt for messages and continue by pressing enter after reading instructions in command prompt.
>>after doing disconnect the phone and switch it on by pressing power button untill vibrate.
here you go THE BOOTLOADER UNLOCK AND CUSTOM RECOVERY INSTALLATION IS SUCCESSFUL.
NOTE: warranty get void on unlocking bootloader but you may lock bootloader anytime to get your warranty.
Thanks to sevenmaxs for recovery but somewhat moded by me.

Get xposed installation file via twrp recovery here
Files linked above
For xposed apk
Files linked above

UPDATE: I HAVE TRIED THIS METHOD ON LATEST lollipop UPDATE THAT WAS OF ABOUT 33MB
BUT MAY OR MAY NOT WORK ON EARLIER VERSIONS
FOR MARSHMALLOW THERE IS NOTHING THAT IT WILL NOT WORK
BUT YOU MAY TRY THIS COME BACK TO LOLLIPOP , TRY THIS METHOD AND FLASH MARSHMALLOW UPDATE VIA TWRP RECOVERY ALSO FLASH SUPERSU LATEST 2.65 OR ABOVE VIA TWRP.

Reserved 3

Reserved 2

Reserved 1

What about marshmallow version?

Ayan Uchiha Choudhury said:
What about marshmallow version?
Click to expand...
Click to collapse
Same method

Anybody tried this?

In my yureka when I used the KitKat method on lollipop, mobile got bricked. So you sure this will work on marshmallow even when it's for lollipop?

Marshamallow updated. How to root it? King root V4.8.2 not yet provided rooting for Lenovo K4 Note.

I would like to know if it will work for my device be4 i try it
My mobile as the lenovo site called it Lenovo Vibe k4 (a7010a48)
Bcs many names of the a7010 and till now really i cant understand the differents
Sent from my Lenovo A7010a48 using Tapatalk

Marshmallow has a doubt on this
Ayan Uchiha Choudhury said:
In my yureka when I used the KitKat method on lollipop, mobile got bricked. So you sure this will work on marshmallow even when it's for lollipop?
Click to expand...
Click to collapse
Lollipop is rooted before but not Marshmallow so may not work
. Let me see and say.

ramisumi said:
Lollipop is rooted before but not Marshmallow so may not work
. Let me see and say.
Click to expand...
Click to collapse
Ian running marshmallow 6.0 in k4
Tried all m methods to root but no happy
Got boot loader unlocked but can't flash twrp
Even flashed can't boot

chsaiteja98 said:
Ian running marshmallow 6.0 in k4
Tried all m methods to root but no happy
Got boot loader unlocked but can't flash twrp
Even flashed can't boot
Click to expand...
Click to collapse
I'll post my view after doing, I'm on Marshmallow n have unlocked bootloader. Root not worked till. Will try this but seems not compatible with Marshmallow. And I don't want to revert back to lollipop.

ramisumi said:
I'll post my view after doing, I'm on Marshmallow n have unlocked bootloader. Root not worked till. Will try this but seems not compatible with Marshmallow. And I don't want to revert back to lollipop.
Click to expand...
Click to collapse
Now I am trying this method for marshmallow if something happens I'll go to lollipop and do the same if works I'll post in a hour or two wait bro

ramisumi said:
I'll post my view after doing, I'm on Marshmallow n have unlocked bootloader. Root not worked till. Will try this but seems not compatible with Marshmallow. And I don't want to revert back to lollipop.
Click to expand...
Click to collapse
did the 6.0 come with unlocked bootloader or did you unlock it somehow??

Not working on Marshmallow. The part is Rooting first otherwise goes nothing. TWRP is not Installing. TWRP provided here is of Sevemaxs so as before is same.
---------- Post added at 01:14 PM ---------- Previous post was at 01:08 PM ----------
Ayan Uchiha Choudhury said:
did the 6.0 come with unlocked bootloader or did you unlock it somehow??
Click to expand...
Click to collapse
No. Marshmallow has no provision but here is: http://forum.xda-developers.com/general/general/marshmallow-lenovo-k4-note-bootloader-t3343864

gursewak.10 said:
hello friends
lenovo k4 note's bootloader unlock for lollipop version is successful. iam sharing the procedure for this but please do as i says or i am not responsible for any bootloop or anything happening to your phone.
WARNING:USERDATA WILL BE ERASED***
ok heres the process
requirement-
SP flash tool(already present in stock rom file) or get it here(Recommended) https://userscloud.com/jrdb0m4eo5cd
lenovo k4 note zip file by gursewak.10 get it here https://userscloud.com/09wtwq65i99n
and extract in a drive in your pc
ok switch off the phone
(1) open sp flash tool
load scatter file from the folder 'patch' in extracted folder provided
tick preloader file if there is no preloader file showing in there select the file preloader file(preloader.bin) from 'patch' folder.
ok flash it to your phone
disconnect it after flash tool showing download ok
don't switch on
(2) now press ctrl+alt+v to get sp flash tool in advanced mode
ok click option window in flash tool tick write memory.
tick the preloader file
go to write memory option
click file path and select uboot.bin file from folder 'patch'.
select begin address and write this address there 0x1c80000
region should be EMMC_USER
click write memory and connect switched off phone to pc
after showing write memory ok message disconnect mobile
(3) ok switch on the phone by pressing both vol. buttons untill recovery appears
erase user data here and reboot
after fully bootup
go to phone settings>>developer settings(if doesn't appears goto settings>>about phone>>device information >>tap build number untill it shows "now you are a developer"
enable developer options
enable oem unlocking
enable usb debugging
(4) connect to pc
click unlock_recovery.bat file in extracted folder
>>also at one time phone will ask to unlock the bootloader ,confirm by pressing volume +
>>watch the command prompt for messages and continue by pressing enter after reading instructions in command prompt.
>>after doing disconnect the phone and switch it on by pressing power button untill vibrate.
here you go THE BOOTLOADER UNLOCK AND CUSTOM RECOVERY INSTALLATION IS SUCCESSFUL.
NOTE: warranty get void on unlocking bootloader but you may lock bootloader anytime to get your warranty.
Thanks to sevenmaxs for recovery but somewhat moded by me.
Click to expand...
Click to collapse
Bro, The preloader file you shared here, is this same that's present on Russian Lenovo forums.
Sent from my Lenovo A7010a48 using XDA Premium 4 mobile app

the only part has Gursewak.10 done is to modify unlock_recovery batch file to which recovery is to flash only of Gursewak.10. Else everything was lying on net before a few days.

[EXPERIMENTAL] [RECOVERY] [TWRP] Vivo V3 (non-max) Custom Recovery

[size=+2]TWRP Custom Recovery for Vivo V3[/size]
This is an experimental custom recovery for Vivo V3 based on TWRP version 3.0.2-0. You can use this recovery to flash custom ROMs and other flashable ZIPs. Full root access is available via an ADB shell.
Important - read before flashing
This is an experimental recovery. Whilst it will not prevent your device from booting back in to its normal ROM, I am not responsible for anything that goes wrong. If you flash this recovery to your device you will no longer be able to receive OTA updates for Funtouch OS and will have to install ROM updates manually unless you flash back to original stock recovery.
DOWNLOAD LINK
TWRP Custom Recovery
Flashing Instructions
1. Go to Settings, then More Settings, About Phone, and then tap Software version 10 times. It should now say that you are a developer.
2. Go to Settings, then More Settings, Developer Options. Turn on USB Debugging and Enable OEM Unlock.
3. Connect your phone to your computer. Authorize the USB debugging request on your phone screen.
4. If you haven't already, install ADB/Fastboot drivers. See here for further instructions: http://forum.xda-developers.com/showthread.php?t=2317790
5. Place the TWRP file from the download links above in your current directory
6. Completely power off your phone.
7. Hold the VOLUME DOWN and POWER buttons together until you see a black screen with FASTBOOT options.
8. In a command line window (or using Minimal ADB Fastboot if you used the above instructions), run this command:
Code:
fastboot flash recovery recovery-v3.img
9. If all went well the custom recovery has now been flashed. Use the volume buttons on your phone to select "RECOVERY" from the FASTBOOT options on-screen, then press the power button to confirm. You should now be in recovery mode! Congratulations!
Going back to stock recovery
Currently I have no original recovery image, so you will not be able to go back to stock recovery unless Vivo release it (unlikely).

Note to testers:
You can make a backup of the stock V3 recovery by flashing this TWRP recovery like so:
Code:
fastboot flash boot recovery-v3.img
fastboot reboot
This flashes the recovery to your boot partition rather than the recovery partition. You'll then be able to make a backup of the stock recovery in TWRP. After saving a copy to your SD card, flash back to your original boot partition like so:
Code:
fastboot flash boot boot-original-v3-1.8.20.img
fastboot reboot
Afterwards you can flash this TWRP to your recovery partition as normal and then you also have a stock recovery file too. Please upload it to this forum if you make a backup of stock.
The original stock boot image can be downloaded here if you need it: https://drive.google.com/file/d/0B0TtHsl8vcaLYTJhZHNHTFVfdGs/view?usp=sharing

hi
sorry for my bad english
i am tried with my v3 but when press the recovery button reboot to agin fastboot mode i analyse the recovery it is v3 max recovery img plz upload the device tree i will develiop the recovery
vivo v3 are sd 616 chip set and v3 max are sd652
---------- Post added at 01:57 AM ---------- Previous post was at 01:56 AM ----------
provide step for making the recovery for v3 max i will port to this v3

prabaecepct said:
sorry for my bad english
i am tried with my v3 but when press the recovery button reboot to agin fastboot mode i analyse the recovery it is v3 max recovery img plz upload the device tree i will develiop the recovery
vivo v3 are sd 616 chip set and v3 max are sd652
---------- Post added at 01:57 AM ---------- Previous post was at 01:56 AM ----------
provide step for making the recovery for v3 max i will port to this v3
Click to expand...
Click to collapse
Hello.
Making of custom recovery can be very difficult to explain but this thread tells you how to build TWRP recovery from source code.
Some pointers for building for Vivo V3 SD616:
1. Use Omni 5.1 sources instead of CM (see thread for more info)
2. Download latest V3 firmware from www.vivoglobal.com. Extract boot.img from the ZIP file and then use software called Android Image Kitchen (or similar) to extract the contents of boot.img.
3. From boot.img, find fstab.qcom file and make a note of its contents. You will need this information to make recovery.fstab file for TWRP.
4. From boot.img, find the "device fingerprint" and make a note of it. It's usually in default.prop file or can be somewhere else.
5. Make a note of the kernel command line options from the boot.img zImage split as they may be useful.
Finally:
If you manage to compile a full TWRP recovery for your phone but it does not boot, simply replacing the kernel from boot.img of latest firmware into the TWRP image may fix this. (again use Android Image Kitchen or similar).
I hope this helps. Sorry I can't be of more assistance.

hi i am upload the orinal stock recovery
plz bulid to the twrp our vivo v3
https://docs.google.com/uc?export=download&confirm=2Gic&id=0B-Tl2AxV63-aOFNYTGZvMXQzQ3c

prabaecepct said:
hi i am upload the orinal stock recovery
plz bulid to the twrp our vivo v3
https://docs.google.com/uc?export=download&confirm=2Gic&id=0B-Tl2AxV63-aOFNYTGZvMXQzQ3c
Click to expand...
Click to collapse
Please try this one based on your stock recovery
https://drive.google.com/open?id=0B0TtHsl8vcaLR25fZkR1YkloUTA

Hi i flashed only stock recovery are booting

Can i flash this recovery for vivo y51l

Simple answer no
nimesh.batra93 said:
Can i flash this recovery for vivo y51l
Click to expand...
Click to collapse
you will brick your phone , Only flash your phone`s compatible ROMs and Recoveries i.e those of your phone model and cpu structure . Also Vivo has not open sourced its development as other phone makers so making it custom friendly is freakin pain in the >> A$% . anyhow :good: keep your hopes up someone might just make a custom rom for VIVO once they hack into it. Till then stay away from anything that is not VIVO

For those who need the official VIVO V3 (non-max) recovery, I have the latest version here:
Original recovery image (Global ROM, non max)

Hy @liamcrayden,
do i need to unlock bootloader before i flash the twrp?

Hy @liamcrayden @prabaecepct ,
Seem that i can't install twrp to this devices before unlock it's bootloader.
I've tried to enabled developer option > enable usb debugging > enable OEM unlock
Went to fastboot mode and type : " fastboot oem unlock "
And it just give error message "FAILED (remote: unknown command or device is lock)"
My Software Version is PD1524F_EX_A_1.12.14 Lolipop 5.11 Funtouch OS 2.5
Do i need to downgrade my version?
Really apprecited if anyone can help me.

langithitam said:
Hy @liamcrayden @prabaecepct ,
Seem that i can't install twrp to this devices before unlock it's bootloader.
I've tried to enabled developer option > enable usb debugging > enable OEM unlock
Went to fastboot mode and type : " fastboot oem unlock "
And it just give error message "FAILED (remote: unknown command or device is lock)"
My Software Version is PD1524F_EX_A_1.12.14 Lolipop 5.11 Funtouch OS 2.5
Do i need to downgrade my version?
Really apprecited if anyone can help me.
Click to expand...
Click to collapse
I can finally unlock my Vivo V3 (Not Max). See attachment below.

Sithu Htun said:
I can finally unlock my Vivo V3 (Not Max). See attachment below.
Click to expand...
Click to collapse
Finally I am also unlocked.
Sent from my Vivo vivo V3 using XDA Labs

Sithu Htun said:
I can finally unlock my Vivo V3 (Not Max). See attachment below.
Click to expand...
Click to collapse
I flashed supersu using TWRP but its showing device not rooted

Can anyone provide me the twrp.img file for Vivo Y12

How to unbrick redmi note 5 pro bricked by pre-ARB4 ROM downgrade

Here's the guide from the MIUI forum:
http://en.miui.com/thread-3805592-1-1.html
Reposted in case it disappears:
Yes, this is a working solution for unbricking Redmi Note 5 Global.
The credits go to @chocoml. Her/His original post is here:
http://en.miui.com/thread-3802858-1-1.html
Credits also to @br4n94 for the MiFlash portable tip.
So, how does it work?
1. Download the two files here: https://drive.google.com/drive/folders/16lQ-A175D_5DJU-YT4lbul5htgaNNw21?usp=sharing
This is a fastboot ROM v. 9.5.19.0. Note that you're downloading an operating system from the Internet. It can do anything - steal your money, eat your breakfast, run away with your girlfriend, whatever. Beware.
2. Unzip somewhere - you get a flashable fastboot rom.
3. Download miflash portable from May 2018
4. Unzip.
5. Go into the miflash folder. Find folder "mi" and rename it to something, for example "_mi"
6. Start XiaoMiFlash.exe
7. Connect the bricked phone. You should see message in windows about Quallcom interface 9008 blablabla.
8. Refresh MiFlash to see the phone on com XX
9. Selected the anti-test rom which you unzipped in (2)
10. Do a clean_all.bat
11. Wait for the flashing to finish.
You're unbricked.
Optional, but strongly recommended:
12. Restart straight into fastboot
13. Flash another ROM from a source you trust.
Cheers and thanks again to @chocoml and @br4n94 for the tips! Send them some credits!
Finally, I'd like to point out that this "solution" unbricks the phone, but does not remove the problem.
1. We still have NO access to EDL flashing using MiFlash from Xiaomi.
2. We still don't have trusted roms. While this appears to work, it may or may not do other things.
3. ARB4 can still brick you up.
I strongly suggest you keep a backup of this ROM and the MiFlash tool after you're done.
Also, it is possible that if you continute to upgrade with Xiaomi ROMS, they may "fix" something, and this method may stop working.
So if you want to keep your phone free, move on to something else, and away from MIUI.
Good luck,

Does it require the device to be opened and to be put in edl test point?

dustmalik said:
Does it require the device to be opened and to be put in edl test point?
Click to expand...
Click to collapse
no

it is can downgrade back to firmware without anti rollback if using this guide?

Can it come out of fake UBL?
Sent from my Redmi Note 5 using Tapatalk

Mi flash not recognizing fastboot rom
Mi flash isnt recognizing rom downloaded files from gdrive

Works for my redmi note 5 pro , but i don´t know wich rom an how to fla**** in this step , can someone tell me ??
Optional, but strongly recommended:
12. Restart straight into fastboot
13. Flash another ROM from a source you trust.

got an xbl error..

google drive link is ded. does anyone have a link for the files?

how to solve antirbpass error on fastboot flashing

I have a violet device.
That device bootloader is unlocked. Then I have try to flash custom recovery, but device can't boot into recovery, not custom & mi recovery.
Now device only showing redmi by xiaomi logo.
Then I have try to flash a latest fastboot rom, but its cannot done showing antirbpass error.
Also I trying to format user data by adb command it's showing my device is f2fs pertition format,it's cannot be done.
Now device only boot into fastboot mode, but not take a fastboot flash, show antirbpass error
How can I solve this issue.
Sorry for my bad English.

Download minimal adb & extract it in c drive & then extract fastboot into same folder then connect your phone to pc in fastboot mode & go to that folder & double click clean all.bat & wait for it to finish & you will boot to rom & unbrick your phone 100% tested by me

M.A. Kaium said:
I have a violet device.
That device bootloader is unlocked. Then I have try to flash custom recovery, but device can't boot into recovery, not custom & mi recovery.
Now device only showing redmi by xiaomi logo.
Then I have try to flash a latest fastboot rom, but its cannot done showing antirbpass error.
Also I trying to format user data by adb command it's showing my device is f2fs pertition format,it's cannot be done.
Now device only boot into fastboot mode, but not take a fastboot flash, show antirbpass error
How can I solve this issue.
Sorry for my bad English.
Click to expand...
Click to collapse
Please post this in the questions sub forum...this is not the place..

navi_58861170 said:
Download minimal adb & extract it in c drive & then extract fastboot into same folder then connect your phone to pc in fastboot mode & go to that folder & double click clean all.bat & wait for it to finish & you will boot to rom & unbrick your phone 100% tested by me
Click to expand...
Click to collapse
I have platform tools from.which i used to flash recovery etc. Should i copy the fastboot rom files in platform tools and click on flash all.bat because there is no .bat file of clean all.
Sent from my Redmi Note 7 Pro using XDA Labs

navi_58861170 said:
Download minimal adb & extract it in c drive & then extract fastboot into same folder then connect your phone to pc in fastboot mode & go to that folder & double click clean all.bat & wait for it to finish & you will boot to rom & unbrick your phone 100% tested by me
Click to expand...
Click to collapse
where i can download minimal adb ? I have the same problem.... thank.

https://forum.xda-developers.com/showthread.php?t=2588979

antibrpass error
joke19 said:
https://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
good morning, my xiaomi redmi note 7 lew I did bootloader unlock and install the recovery "twrp", install a custom rom viperos, after it restarted it stayed in the redmi logo, I tried to install other rom via recovey and it doesn't recognize me zip, I managed install the crDroid but it stays in the startup logo, I tried to flash with xiaomi miflash tool and I get the error of flash anti-pass error and I can't get my RN7 back to life, who can help me thank you from now on.
Thank you

Which twrp? I hope orange fox
---------- Post added at 12:28 PM ---------- Previous post was at 12:24 PM ----------
Wipe system, data and cache.
Then flash the last firmware. Is ur choice Chinese beta or global.
After it ur rom, maybe a customer kernel, gapps and maybe magisk.
She first start need time and by havoc by me my phone reboot short by the first loading.
And every time u play with ur software, u must look for ur battery.
Hope it helps
Miui is not my.

thank
thanks, I managed to roll a custom rom, but I wanted to use another rom and in the recovery it gives invalid zip file format and it doesn't let me install, but at least I recovered the phone. now see how I do to install my rom viperos :good:

bro ur a ****ing genuis i spent like 6 hours trying various custom roms and trying all stock roms to fix this issue . love u finally my phone is working bro .