Hi, my tablet SAMSUNG Galaxy tab 2 10.1 (p5110) had an error while installing the stock firmware with Odin. Now it shows:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
I tried with kies: nothing, it won't recognise the tablet.
The problem is this: the tablet can't go on Download Mode! And can't power off until the battery is "out"
Is USB Jig good for this problem?
willybar said:
Hi, my tablet SAMSUNG Galaxy tab 2 10.1 (p5110) had an error while installing the stock firmware with Odin. Now it shows:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
I tried with kies: nothing, it won't recognise the tablet.
The problem is this: the tablet can't go on Download Mode! And can't power off until the battery is "out"
Is USB Jig good for this problem?
Click to expand...
Click to collapse
While it displays that screen, does it connect in Odin?
champ1919 said:
While it displays that screen, does it connect in Odin?
Click to expand...
Click to collapse
Yes.
Maybe, must i flash the stock firmware with that screen?
willybar said:
Yes.
Maybe, must i flash the stock firmware with that screen?
Click to expand...
Click to collapse
Try it
Sent from my SAMSUNG-SM-G930A using Tapatalk
champ1919 said:
Try it
Sent from my SAMSUNG-SM-G930A using Tapatalk
Click to expand...
Click to collapse
Thanks, but it doesn't work.
Odin shows "fail".
Can there be nothing to do with this tablet? It doesn't go to download mode and shows the screen --> Firmware upgrade encountered an issue. Please select recovery mode... and try again :crying:
willybar said:
Thanks, but it doesn't work.
Odin shows "fail".
Can there be nothing to do with this tablet? It doesn't go to download mode and shows the screen --> Firmware upgrade encountered an issue. Please select recovery mode... and try again :crying:
Click to expand...
Click to collapse
Please try the following:
1. plug the tablet into your pc
2. open up device manager and delete the driver with the yellow triangle
3. re insert your usb cable and you tablet should pop up in odin...
guest4711 said:
Please try the following:
1. plug the tablet into your pc
2. open up device manager and delete the driver with the yellow triangle
3. re insert your usb cable and you tablet should pop up in odin...
Click to expand...
Click to collapse
Thank you! I will try.
Can i ask you the site (or link) where to download "device manager"?
( There are several on the internet, different)
willybar said:
Thank you! I will try.
Can i ask you the site (or link) where to download "device manager"?
( There are several on the internet, different)
Click to expand...
Click to collapse
I mean the windows device manager ...
guest4711 said:
I mean the windows device manager ...
Click to expand...
Click to collapse
Thanks, There isn't any yellow triangle. Drivers seems to be OK. [emoji37]
Inviato dal mio SM-G900F utilizzando Tapatalk
willybar said:
Thanks, There isn't any yellow triangle. Drivers seems to be OK. [emoji37]
Inviato dal mio SM-G900F utilizzando Tapatalk
Click to expand...
Click to collapse
Is there any notification on your pc when you connect your phone to your PC? If not, try another cable and/or USB port.
guest4711 said:
Is there any notification on your pc when you connect your phone to your PC? If not, try another cable and/or USB port.
Click to expand...
Click to collapse
Hi,
Yes, "Samsung Galaxy Modem #6" when i connect.
I also reinstalled drivers!
Inviato dal mio SM-G900F utilizzando Tapatalk
willybar said:
Hi,
Yes, "Samsung Galaxy Modem #6" when i connect.
I also reinstalled drivers!
Click to expand...
Click to collapse
OK, but this is not the needed one (this is the driver for internet sharing). Try to change the driver to android device, adb, Samsung adb, Samsung android device or similar via "change driver" or even better, use another pc and start over. The "universal adb driver" package could be helpful.
guest4711 said:
OK, but this is not the needed one (this is the driver for internet sharing). Try to change the driver to android device, adb, Samsung adb, Samsung android device or similar via "change driver" or even better, use another pc and start over. The "universal adb driver" package could be helpful.
Click to expand...
Click to collapse
Thank you! After this, i tried to reinstall firmware.
The procedure fails, but it has left at least! This was not the first time.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Inviato dal mio SM-G900F utilizzando Tapatalk
willybar said:
Thank you! After this, i tried to reinstall firmware.
The procedure fails, but it has left at least! This was not the first time. 
Inviato dal mio SM-G900F utilizzando Tapatalk
Click to expand...
Click to collapse
OK. Odin found this tab, fine. But flashing failed. So I would double-check whether it is the right firmware (espresdo-wifi or espresso-3g, 7" or 10"). I hope it is not a defect emc.
guest4711 said:
OK. Odin found this tab, fine. But flashing failed. So I would double-check whether it is the right firmware (espresdo-wifi or espresso-3g, 7" or 10"). I hope it is not a defect emc.
Click to expand...
Click to collapse
Thank you for your attention, very kind.
The firmware file is the correct one and tried to download it on both Sammobile and Xda.
Now, I tried to change PCs and start flashing from the beginning. But when I connect to the new PC, the tablet jumps out "Unrecognized USB Device".[emoji724]
My PC regularly has Kies, but it fails to install drivers
Inviato dal mio SM-G900F utilizzando Tapatalk
willybar said:
Thank you for your attention, very kind.
The firmware file is the correct one and tried to download it on both Sammobile and Xda.
Now, I tried to change PCs and start flashing from the beginning. But when I connect to the new PC, the tablet jumps out "Unrecognized USB Device".[emoji724]
My PC regularly has Kies, but it fails to install drivers
Inviato dal mio SM-G900F utilizzando Tapatalk
Click to expand...
Click to collapse
Perhaps the tab rejects the new PC cause of missing authentication... So we must stay on the old one.
You said, you have Kies installed. Did you try the way mentioned in the message on the tab? Kies should not need to install drivers AFAIK (ODIN found the tab...) But I'm not shure (and 1000km away from home). Google for Kies drivers and compare the results from ODIN drivers.
You'll get that issue if KIES or any other crap of it is installed while using Odin. Also a anti virus program could cause trouble.
Uninstall kies, but you can keep the driver.
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Related
I flashed the cm rom,then wanted to go back to stock JB,and flashed the firmware over ODIN,suceeded.Then it was stuck in a bootloop.I flashed a any-root Stock kernel.still bootloop now on kernel logo,then i tried instaling TWRP,and it FAIL-ed and the TAB froze on the ODIN mode.i turned it off and got the error that firmware upgrade encountered an error and error(phone-yellow triangle--PC) icon.
Please help me!! :crying:
EDIT:
SOLVED!
PLUG the tablet in the PC,no matter if that error is there,just plug it
start ODIN,it should accept the device and flash the stock firmware(PDA)
Either Kies (safe)
Or odin (development)
dailyuse17 said:
Either Kies (safe)
Or odin (development)
Click to expand...
Click to collapse
Kies didnt even recognise it.
Odin is safest and best.For odin you have 4 steps for flashing,and in Kies you have 12 unreasonable steps.
Sent from my ST15i using xda premium
Marionette said:
EDIT:
SOLVED!
PLUG the tablet in the PC,no matter if that error is there,just plug it
start ODIN,it should accept the device and flash the stock firmware(PDA)
Click to expand...
Click to collapse
Whew!!! Found this and recovered my tablet. I was in the middle of flashing it when a co-worker picked it up and the cable came out. Thanks!!
cpufixrman said:
Whew!!! Found this and recovered my tablet. I was in the middle of flashing it when a co-worker picked it up and the cable came out. Thanks!!
Click to expand...
Click to collapse
Glad to help
Sent from my GT-P5110 using XDA Premium HD app
Marionette said:
I flashed the cm rom,then wanted to go back to stock JB,and flashed the firmware over ODIN,suceeded.Then it was stuck in a bootloop.I flashed a any-root Stock kernel.still bootloop now on kernel logo,then i tried instaling TWRP,and it FAIL-ed and the TAB froze on the ODIN mode.i turned it off and got the error that firmware upgrade encountered an error and error(phone-yellow triangle--PC) icon.
Please help me!! :crying:
EDIT:
SOLVED!
PLUG the tablet in the PC,no matter if that error is there,just plug it
start ODIN,it should accept the device and flash the stock firmware(PDA)
Click to expand...
Click to collapse
I can't find the stock firmware for my p5113. I'm downloading something right now that I think is it, but I'm not sure.
dbrinkley3 said:
I can't find the stock firmware for my p5113. I'm downloading something right now that I think is it, but I'm not sure.
Click to expand...
Click to collapse
Looked for p113,but nothing.
Not sure,but with roms,it is said to use p5110 builds.
But i am not sure about firmwares...
Sent from my GT-P5110 using XDA Premium HD app
Marionette said:
Looked for p113,but nothing.
Not sure,but with roms,it is said to use p5110 builds.
But i am not sure about firmwares...
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
Idk, I've just been stuck on this "Firmware upgrage encountered an issue" screen for a while now. I got it after I tried to root my device, but then realized I downloaded p5100 instead of p5113. I kept going to the cwm screen and trying to install it because I didn't realize it was the wrong one, and then on reboot it came to this screen. And piece of **** Kies says it can't connect to my device. It'll just keep saying "Connecting" and then pop up saying error please reboot device.
dbrinkley3 said:
Idk, I've just been stuck on this "Firmware upgrage encountered an issue" screen for a while now. I got it after I tried to root my device, but then realized I downloaded p5100 instead of p5113. I kept going to the cwm screen and trying to install it because I didn't realize it was the wrong one, and then on reboot it came to this screen. And piece of **** Kies says it can't connect to my device. It'll just keep saying "Connecting" and then pop up saying error please reboot device.
Click to expand...
Click to collapse
Keep looking for the firmware for p5113,and when you find it,flash with odin and it will work.
Sent from my GT-P5110 using XDA Premium HD app
Not recognized
The Marionette said:
Glad to help
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
My Tab 2 is not even being recognized by ODIN or Kies. The screen about frimware upgrade fail shows up and that is all...Any suggestions?
Thank You,
I had that too!
mrsmalley said:
My Tab 2 is not even being recognized by ODIN or Kies. The screen about frimware upgrade fail shows up and that is all...Any suggestions?
Thank You,
Click to expand...
Click to collapse
To fix this just follow these steps:
1. plug the tablet into your pc
2. open up device manager and delete the driver with the yellow triangle
3. re insert your usb cable and you tablet will pop up in odin!
I foud it out and it worked for me!
but if this did't work try it again until it works.
I cant get mine to work with the rom or odin, still says firmware upgrade failed and stays like that, cant get into recovery mode anymore
mrsmalley said:
My Tab 2 is not even being recognized by ODIN or Kies. The screen about frimware upgrade fail shows up and that is all...Any suggestions?
Thank You,
Click to expand...
Click to collapse
Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
How can i flash the stock firmware if the tablet can't go on "Download Mode"?
willybar said:
Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
How can i flash the stock firmware if the tablet can't go on "Download Mode"?
Click to expand...
Click to collapse
Does Odin recognize it?
champ1919 said:
Does Odin recognize it?
Click to expand...
Click to collapse
Yes: but fails
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Inviato dal mio SM-G900F utilizzando Tapatalk
Please tell me wat r the things i need to do for installing custom rom... i m coming from motorola defy, there i just had to root the phone by connecting to pc and run superoneclick and install cwm then flash rom.... but i m new bootloader unlocking here.... what are the things i need to before start anything... please help... i just got my one s with some chinese integrated rom... please see the pics...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please tell me the steps to flash a custom rom.... thanks...
i am stuck at bootloader unlock Step 4.... i got this error pops up usb device not recognized....
what to do?? please help guys... somebody might have gone through this naa....
U dont know how to unlock bootloader and you are on superCID 11111111
vatsaman said:
U dont know how to unlock bootloader and you are on superCID 11111111
Click to expand...
Click to collapse
he maby bought it already s-offed...
---------- Post added at 03:48 AM ---------- Previous post was at 03:48 AM ----------
aneeshcphilip said:
Please tell me wat r the things i need to do for installing custom rom... i m coming from motorola defy, there i just had to root the phone by connecting to pc and run superoneclick and install cwm then flash rom.... but i m new bootloader unlocking here.... what are the things i need to before start anything... please help... i just got my one s with some chinese integrated rom... please see the pics...
Please tell me the steps to flash a custom rom.... thanks...
Click to expand...
Click to collapse
u can find bootloader unlocking instruction in developpement section. read it carefully it s not that hard.
vatsaman said:
U dont know how to unlock bootloader and you are on
Click to expand...
Click to collapse
whats so special in superCID 11111111??? i got it like this....
psykodali said:
u can find bootloader unlocking instruction in developpement section. read it carefully it s not that hard.
Click to expand...
Click to collapse
is this the thread>>>>> LINK
Yes
Envoyé depuis mon HTC One S avec Tapatalk
psykodali said:
Yes
Envoyé depuis mon HTC One S avec Tapatalk
Click to expand...
Click to collapse
do i need to upgrade to jb ota before doing any bootloader unlock and other things???
or can i directly start unlocking now?? does hboot version matters??
I cant install jb ota update.... While installation going on red triangle with exclamation mark shows up and reboot... No updation going on...
Sent from my RM-885_im_india_249 using Board Express
And I cant able to attach it via usb to mypc.... Tried installing and reinstalling HTC sync and different drivers available.... But all in vain... Should I return the item backto eBay seller or any solution available.... Help please..
Sent from my RM-885_im_india_249 using Board Express
aneeshcphilip said:
And I cant able to attach it via usb to mypc.... Tried installing and reinstalling HTC sync and different drivers available.... But all in vain... Should I return the item backto eBay seller or any solution available.... Help please..
Sent from my RM-885_im_india_249 using Board Express
Click to expand...
Click to collapse
Try using the all in one toolkit. Also there are certain Places your phone has to be for certain steps. I believe for boot loader you have to have adb debugging on and in either charge only mode or mount storage mode
Sent from my One S using xda app-developers app
I tried aio toolkit but without phone detected in it, no commands are working....
Sent from my RM-885_im_india_249 using Board Express
aneeshcphilip said:
I tried aio toolkit but without phone detected in it, no commands are working....
Sent from my RM-885_im_india_249 using Board Express
Click to expand...
Click to collapse
you tried hassoon2000 toolkit. And the toolkit won't recognize it?
Sent from my One S using xda app-developers app
Yes tried hasoon20000 toolkit..... Its not recognising my one s..,..
What might be the reason I cant install jb Ota.,...?
Sent from my RM-885_im_india_249 using Board Express
aneeshcphilip said:
Yes tried hasoon20000 toolkit..... Its not recognising my one s..,..
What might be the reason I cant install jb Ota.,...?
Sent from my RM-885_im_india_249 using Board Express
Click to expand...
Click to collapse
If your computer's software is having problems connecting to your phone you need to make sure your drivers are installed correctly, and make sure the USB cable you are using supports adb and fastboot commands (try a different cable). Some cables wont work with adb, it's always best to use the stock cable from HTC.
Also if your trying to do the ota. Phone must have the stock recovery
Manually get phone in bootloader connect the cable. Get in fastboot USB mode. Then flash manually or via toolkit.
Verstuurd van mijn HTC One S met Tapatalk
be6op said:
If your computer's software is having problems connecting to your phone you need to make sure your drivers are installed correctly, and make sure the USB cable you are using supports adb and fastboot commands (try a different cable). Some cables wont work with adb, it's always best to use the stock cable from HTC.
Click to expand...
Click to collapse
tried with 2 other computers... same problem when u r in bootloader screen and connect to pc via usb, then in taskbar it shows usb device not recognised... tried with stock cable and motorola usb cable also... same result...
i also have another issue from first day itself that it wont charge continually.... it will stop charging after a while and then i had to replug the cable to start charging again...
I think its the problem with the device... i m anyway going to claim for refund/replacement....
real187 said:
Also if your trying to do the ota. Phone must have the stock recovery
Manually get phone in bootloader connect the cable. Get in fastboot USB mode. Then flash manually or via toolkit.
Verstuurd van mijn HTC One S met Tapatalk
Click to expand...
Click to collapse
phone is in stock recovery... i cant even able to detect the phone in fastboot usb mode...
Install the HTC sync drivers, then it should recognize it.
Sent from my HTC One S using xda premium
why cant i update to jb ota?? i m getting this screen after the download and while in the installing process and reboots....pfa for the pic...
I Repair My Xl Softwere But after downloading software Volume Download + Usb Not Working.. :crying:
Lams Pankaj said:
I Repair My Xl Softwere But after downloading software Volume Download + Usb Not Working.. :crying:
Click to expand...
Click to collapse
Please elaborate your issue.
You tried to install which software??stock ftf file or what??
You are not able to enter in flashmode?or fastboot?
Please explain things which you tried.
Thanks
Hazil
I think the problem of our friend is the same as I do ...
After unlock my bootloader, I could not connect my phone in flash mode. But it Lams Pankaj who explain to us please.
I am very interested in this topic.
Stronger1101 said:
I think the problem of our friend is the same as I do ...
After unlock my bootloader, I could not connect my phone in flash mode. But it Lams Pankaj who explain to us please.
I am very interested in this topic.
Click to expand...
Click to collapse
For flash mode
hold volume down and press power button 1-2s
or
"Xperia reboot" (select Xperia Z) http://forum.xda-developers.com/showthread.php?t=2451225
petrre said:
For flash mode
hold volume down and press power button 1-2s
or
"Xperia reboot" (select Xperia Z) http://forum.xda-developers.com/showthread.php?t=2451225
Click to expand...
Click to collapse
Xperia L doesn't support volume down+power on.
This device only enters flashmode when you connect it to usb while holding volume down.
Also the app here needs rooted device
abhi007.john said:
Xperia L doesn't support volume down+power on.
Click to expand...
Click to collapse
Yes
But how do I explain to my Xperia L ?
Sent from my C2105 using XDA Free mobile app
petrre said:
Yes
But how do I explain to my Xperia L ?
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
Try this
pull out the battery, press and hold power button for atleast 30 seconds. Then put in the battery, press and hold volume down and connect to usb.
Make sure your usb cable and port are working.
Hit thanks if it helped.
abhi007.john said:
Try this
pull out the battery, press and hold power button for atleast 30 seconds. Then put in the battery, press and hold volume down and connect to usb.
Make sure your usb cable and port are working.
Hit thanks if it helped.
Click to expand...
Click to collapse
The problem is not the cable, because when connected in fastboot mode, no problem.
Enviado desde mi C2105 usando XDA Premium HD app
Stronger1101 said:
The problem is not the cable, because when connected in fastboot mode, no problem.
Enviado desde mi C2105 usando XDA Premium HD app
Click to expand...
Click to collapse
Then it's the drivers.
Your flashtool drivers are either not installed or corrupt.
Download the latest flashtool drivers, install and try.
You can find them here
http://forum.xda-developers.com/showthread.php?t=2635830
Hit thanks if it helped
abhi007.john said:
Then it's the drivers.
Your flashtool drivers are either not installed or corrupt.
Download the latest flashtool drivers, install and try.
You can find them here
http://forum.xda-developers.com/showthread.php?t=2635830
Hit thanks if it helped
Click to expand...
Click to collapse
The drivers are good because the flashtools recognizes that a device connected to flash but the phone only turns on the LED and changes from red to green in less than one second. After that it goes off and nothing happens more.
Enviado desde mi C2105 usando XDA Premium HD app
Stronger1101 said:
The drivers are good because the flashtools recognizes that a device connected to flash but the phone only turns on the LED and changes from red to green in less than one second. After that it goes off and nothing happens more.
Enviado desde mi C2105 usando XDA Premium HD app
Click to expand...
Click to collapse
This is normal. You proceed with the driver updates to successfully flash the phone.
it might be possible that you flashtool is ole. So get the latest on.
Hit thanks if it helped you.
still not working
abhi007.john said:
This is normal. You proceed with the driver updates to successfully flash the phone.
it might be possible that you flashtool is ole. So get the latest on.
Hit thanks if it helped you.
Click to expand...
Click to collapse
I have 0.9.18.2 installed flashtools I think it's the last.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url][/IMG]
Stronger1101 said:
I have 0.9.18.2 installed flashtools I think it's the last.
[/url][/IMG]
Click to expand...
Click to collapse
Yes, it's latest.
And you have tried changing the ftf, pc and cable. Right??
I've tried everything
abhi007.john said:
Yes, it's latest.
And you have tried changing the ftf, pc and cable. Right??
Click to expand...
Click to collapse
That's right, I've used various cables, change pc, install drivers, well I have tried everything but still can not start flash mode. And unfortunately I can not flash any tft since for this mode is necessary flash
Stronger1101 said:
That's right, I've used various cables, change pc, install drivers, well I have tried everything but still can not start flash mode. And unfortunately I can not flash any tft since for this mode is necessary flash
Click to expand...
Click to collapse
Is your bootloader unlocked?
Stronger1101 said:
That's right, I've used various cables, change pc, install drivers, well I have tried everything but still can not start flash mode. And unfortunately I can not flash any tft since for this mode is necessary flash
Click to expand...
Click to collapse
Restore a nandroid backup if u have one..and its d driveres problem..install d flashtool drivers when pc is installing drivers..green light comes
rite bt only for a few seconds?
Hi guys.
I need your help very urgently.
Update my phone to android 4.4.4 and I only realized until that moment that CM11 has no radio support on many devices.
I wanted to install the stock firmware but unfortunately 15.3.A.1.14 open my bootloader after I failed to make the connect via FlashBoot.
That is, if I try to connect to fastboot I have no problems doing that and that's that mean flashing kernels, but if I connect the phone to flash mode the LED does not light,
Although flashtools if recognized as a device connected in this way, if I try to flash the firmware via everything starts normally but before end I throw an error.
Anyone have an idea that I can do, and be able to tell me why this is happening?
I appreciate your help, and I hope you can understand my English is lousy.
Stronger1101 said:
Hi guys.
I need your help very urgently.
Update my phone to android 4.4.4 and I only realized until that moment that CM11 has no radio support on many devices.
I wanted to install the stock firmware but unfortunately 15.3.A.1.14 open my bootloader after I failed to make the connect via FlashBoot.
That is, if I try to connect to fastboot I have no problems doing that and that's that mean flashing kernels, but if I connect the phone to flash mode the LED does not light,
Although flashtools if recognized as a device connected in this way, if I try to flash the firmware via everything starts normally but before end I throw an error.
Anyone have an idea that I can do, and be able to tell me why this is happening?
I appreciate your help, and I hope you can understand my English is lousy.
Click to expand...
Click to collapse
Post the screenshot of the error!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url][/IMG]
david pro said:
Post the screenshot of the error!
Click to expand...
Click to collapse
Thank repsonder, this is the error.
However I must clarify what I have all drivers installed and up before upgrading the phone was detected in flash mode.
Stronger1101 said:
[/url][/IMG]
Thank repsonder, this is the error.
However I must clarify what I have all drivers installed and up before upgrading the phone was detected in flash mode.
Click to expand...
Click to collapse
Try again!!! One day, It happened with me too!!!
Try Changing the Cable or USB port!
:highfive:
david pro said:
Try again!!! One day, It happened with me too!!!
:highfive:
Click to expand...
Click to collapse
Try changing ftf. If still not resolved, try changing flashtool.
Best of luck
Hit thanks if it helps.
still connect flash mode
abhi007.john said:
Try changing ftf. If still not resolved, try changing flashtool.
Best of luck
Hit thanks if it helps.
Click to expand...
Click to collapse
Unfortunately the failure seems to be on the phone and tried it on another pc and the problem persists.
When I connect it with the volume down button, the LED lights green and then red for less than half a second, the pc makes the sound of announcing that something was connected but the phone does not turn on but the led.
The problem is that I have several tested tft and the result is the same, even though flashtool flash mode recognizes something is not right and I assume that's why flash it throws error.
I had the idea to flash in fastboot mode tft but I'm afraid to leave me a hardbrick,:crying:
Stronger1101 said:
Unfortunately the failure seems to be on the phone and tried it on another pc and the problem persists.
When I connect it with the volume down button, the LED lights green and then red for less than half a second, the pc makes the sound of announcing that something was connected but the phone does not turn on but the led.
The problem is that I have several tested tft and the result is the same, even though flashtool flash mode recognizes something is not right and I assume that's why flash it throws error.
I had the idea to flash in fastboot mode tft but I'm afraid to leave me a hardbrick,:crying:
Click to expand...
Click to collapse
I don't think that the red led keeps glowing when you connect on flash mode. It just flashes green and red once.
Also did you an updated flashtool on the other pc?
if not then try once with another cable। and flashtool.
abhi007.john said:
I don't think that the red led keeps glowing when you connect on flash mode. It just flashes green and red once.
Also did you an updated flashtool on the other pc?
if not then try once with another cable। and flashtool.
Click to expand...
Click to collapse
so it is, and try in another pc and another cable but I can not make connect, I have desperate
Stronger1101 said:
so it is, and try in another pc and another cable but I can not make connect, I have desperate
Click to expand...
Click to collapse
One more thing, the companion I recognized only when the computer is turned on but if I turn it off and connect in flash mode does not detect it.
Stronger1101 said:
One more thing, the companion I recognized only when the computer is turned on but if I turn it off and connect in flash mode does not detect it.
Click to expand...
Click to collapse
If I try to flash the firmware via fastboot damage my phone?
Stronger1101 said:
If I try to flash the firmware via fastboot damage my phone?
Click to expand...
Click to collapse
First of all, your english is terrible mate.
As far as I know you can't use fastboot to flash a firmware. I believe it's only for flashing kernels.
Also, make sure you have the required drivers installed. You can download latest drivers from here
http://forum.xda-developers.com/showthread.php?t=2635830
Along with that make sure you use an updated flashtool.
Head over to the general threadand you will find it
Hope it helps
Hit thanks if it does.
hei man, same **** hapens to me, try to use a old version of flashtool, 0.9.11.0 works for me
[LONG POST AHEAD!!]
My father bought me a secondhand S8+ which was only used for less than two months.
(I wasn't really happy it was secondhand but at least I got a new phone and an upgrade from my old J7 2015?? HAHAHA)
I was supposed to software update it since it was only in Android v7.0 when 8.0 already exists, but when I did try to download software updates, it banned me from doing so. It turns out that the phone was rooted.
Since it was rooted, I decided to factory reset it through the settings. And so I did. When I rebooted it, it displayed "Custom binary blocked by OEM Lock." After watching several videos on YouTube, it told me to download its stock firmware and flash everything through Odin. After doing so, I connected the phone to my laptop for it to flash the firmware, but the laptop can't recognize the device and can't install driver software. I tried several ways to fix this: I downloaded the Samsung USB Driver for Mobile Devices, and even downloaded Smart Switch. Still, no driver software. I also tried installing the driver software through searching for it (as suggested by Windows Troubleshooting), but still no driver software.
I also tried wiping my data thru Recovery Mode, and when I selected Reboot after wiping the data, it still displayed the same thing.
Please help :crying:
Have you tried to boot into download mode and then try flashing via odin? If you are on the block "Custom binary blocked by OEM Lock" message you wont get any USB response.
xxxrichievxxx said:
Have you tried to boot into download mode and then try flashing via odin? If you are on the block "Custom binary blocked by OEM Lock" message you wont get any USB response.
Click to expand...
Click to collapse
yes i have booted into download mode, but my laptop still cant detect my device.
I think is a driver problem. First try other USB port after try to connect other Samsung mobile to laptop for test.
Inviato dal mio SM-G955F utilizzando Tapatalk
malebolge said:
I think is a driver problem. First try other USB port after try to connect other Samsung mobile to laptop for test.
Inviato dal mio SM-G955F utilizzando Tapatalk
Click to expand...
Click to collapse
I did try the other ports and at some time it detected the device but it was a Base System Device or Unknown Device and can't install its driver software. My J7 connects perfectly fine to the laptop though.