Database Info

Need help rooting g2x 2.3.3

I just bought this phone off of eBay, and I'm trying to root it. From what I read I have to install CWM recovery then flash a rooted stock 2.3.3. So I try to install cwm recovery. http://forum.xda-developers.com/showthread.php?t=1056847 but I am stuck at step 4 after I plug in the usb to my phone while holding the volume bottoms... nothing pops up, no window saying detects a new APX device. Please help this noob.
Sent from my LG-P999 using Tapatalk

http://forum.xda-developers.com/showthread.php?t=1056847
Try this.. Your battery must be out. Double check in device manager that apx is not there. Sometimes it won't show an error or pop up Windows stating "apx device found". Also reboot your computer and try again. My computer for some reason doesn't recognize usb sometimes. Oh and use same usb port
Sent from my LG-P999 using XDA

Thank you but I have tried that post also. Just can't get the apx error to pop up so I can browse the apx folder. I tried just connect my phone to the PC with the phone on but it just doesn't connect....I wonder if my phones usb port is messed up...it charges just fine though.
Sent from my LG-P999 using Tapatalk

Try another one. Reboot both phone and computer. Try a different usb port. It should pick it up. Then continue with your steps. Try installing lg drivers. 1st
Sent from my LG-P999 using XDA

I think did install LG drivers....if you mean that one .exe file call lgdriver...well I guess I'll keep trying hopefully it works.
Sent from my LG-P999 using Tapatalk

It should work then. Try a different usb cable and computer if possible.
Sent from my LG-P999 using XDA

Oh BTW is there any easier way?
Sent from my LG-P999 using Tapatalk

What version windows r u using? Vista have dat problem

I was using window 7. Going to go home later and try another cable with another laptop
Sent from my LG-P999 using Tapatalk

okay, so i tried 4 different types of usb cables and 3 different computers...2 are windows 7 and 1 is windows xp...still stuck at step 4...i dont understand...

There is no easier way. This is the simplest way. I just don't understand why your computer is not recognizing the phone. Maybe it's hardware problems? Did you check under device manager and didn't see apx???
Sent from my LG-P999 using XDA

No I don't see apx anywhere
Sent from my LG-P999 using Tapatalk

lilviet93 said:
No I don't see apx anywhere
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
Ok, humor us for a sec (or maybe just me) open up your device manager, with battery out, proper button combo (power+both volume buttons?), phone plugged in and hit print screen on your computer keyboard, then open paint and hit paste. Save that as a JPEG and upload it here.
Sent from my LG-P999 using xda premium

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
There...I even did power+volume bottons. I think there is something wrong with the usb of the phone. I plugged it in the pc with power on and nothing pop up dont even ask me to mount my sd card.

Did you click to open usb controllers. Apx should be in there
Sent from my LG-P999 using XDA

yeah i did, the phone just seem to won't connect at all my nokia phone connects just fine

lilviet93 said:
There...I even did power+volume bottons. I think there is something wrong with the usb of the phone. I plugged it in the pc with power on and nothing pop up dont even ask me to mount my sd card.
Click to expand...
Click to collapse
Weird... I am not seeing any LG drivers in your image? On my PC I have one LG driver under modem (this computer isn't set-up for flashing this phone, my laptop is)
I also used NVFlash (as One click wasn't working at that time due to having 2.3.4 from TMo) and I remembered that I had to install the LG updater tool first to get the latest drivers installed before I used NVFlasher and got everything to work.
I remember it was a real pain at the time due to having GB 2.3.4 from factory, I know you have 2.3.3 but try that step out as it might help.

so how would I use NVFlash to root my phone? If you could please explain the steps thank you

lilviet93 said:
so how would I use NVFlash to root my phone? If you could please explain the steps thank you
Click to expand...
Click to collapse
Wow...it's been so long...
I know I used the LG Updater tool to install the latest LG drivers on the computer
Then I DL'd and used the NVFlasher, following the directions for it (with out the drivers the computer won't see your phone, so you can't update/root it)
This is where it get fuzzy.. I'm sure this loaded CWM recovery on the phone, so all I had to do was boot into it and make a back-up recovery of the phone. Rebooted the phone as normal. Still had phone connected to PC.
From there I loaded the update.zip (of Eagle's Blood current file) to the mem card
Rebooted to recovery, wiped cache, etc.. as in the instructions. Updated zip from mem card. when done, rebooted. Went thru Googles setup. Rebooted again and phone was rooted.
I had all the treads subscribed on my old account, but I lost the log-in info and had to create a new one :-(

well this bring me back to being stuck at step 4 at the beginning of the post. when i try to install cwm via nvflasher my phone won't connect to the pc at all to install apx drivers

Help with fixing my phone (Please help)

I am going to give you the complete situation so you guys can help with the best of your ability. Over the summer I was at my Grandmas house with my cousins and we were playing Minecraft on the iPod and iPad. I knew that they had it in the Android market and tried to get it. No luck because it was not compatible with my device (Motorola Fire XT 530). I read up on a tutorial to get any app in the store and that was to change the build.prop settings to nexus x or something so I could get it. I rooted my phone and tried it but it screwed up my keyboard and an error occured on screen. So I went into this program I had and completely deleted the file(build.prop, still have a back up though). I tried to turn on the phone but it was stuck in a boot loop . So it is still in the boot loop and I cant turn on my phone.
Things I have tried so far:
1. Plugging it into my computer (wont show up)
2. Clearing my memory and cache in recovery mode (still wont turn on)
3. ADB (wont show up, not even in recovery mode)
4. Using this tutorial http://forum.xda-developers.com/showthread.php?t=1920446 (Was able to get into the flash mode but MSM Flash 7227 wont install correctly for some reason (have updated drivers))
5. Cant use ODIN because my phone cant go into download mode
6. Using default recovery (not clockwork, dont think I can get it because I cant turn on phone) to update the file (didnt work because apparently Motorola locks there bootloader)
I dont think I left anything else out and am looking for a solution. I also have default recovery which may be an issue.
Thanks a lot for reading
FroggyWoggy25

Edit: Disregard my post

Froggywoggy25 said:
I am going to give you the complete situation so you guys can help with the best of your ability. Over the summer I was at my Grandmas house with my cousins and we were playing Minecraft on the iPod and iPad. I knew that they had it in the Android market and tried to get it. No luck because it was not compatible with my device (Motorola Fire XT 530). I read up on a tutorial to get any app in the store and that was to change the build.prop settings to nexus x or something so I could get it. I rooted my phone and tried it but it screwed up my keyboard and an error occured on screen. So I went into this program I had and completely deleted the file(build.prop, still have a back up though). I tried to turn on the phone but it was stuck in a boot loop . So it is still in the boot loop and I cant turn on my phone.
Things I have tried so far:
1. Plugging it into my computer (wont show up)
2. Clearing my memory and cache in recovery mode (still wont turn on)
3. ADB (wont show up, not even in recovery mode)
4. Using this tutorial http://forum.xda-developers.com/showthread.php?t=1920446 (Was able to get into the flash mode but MSM Flash 7227 wont install correctly for some reason (have updated drivers))
5. Cant use ODIN because my phone cant go into download mode
6. Using default recovery (not clockwork, dont think I can get it because I cant turn on phone) to update the file (didnt work because apparently Motorola locks there bootloader)
I dont think I left anything else out and am looking for a solution. I also have default recovery which may be an issue.
Thanks a lot for reading
FroggyWoggy25
Click to expand...
Click to collapse
First of all you cant use Odin to flash Motorola Devices because it is meant for Samsung phones.
Secondly answer these questions:
1. In PC which OS are you using?
2. Have you tried reinstalling RSD lite then rebooting?
Having stock recovery is no issue because you can't get any other in this phone.
It is easy to get it back working.
I suggest you to try some other PC.
OR
Follow these steps as in order.
1. Uninstall RSD lite.
2. Uninstall Motorola Drivers.
3. Now first install Motorola Drivers the RSD lite.
I think this may work for you.

I am using windows 7 on a laptop which may be the problem because it may be a hub not directly connected to the mother board. Thank you and I will try your suggestion.
Btw thanks for all your help over the last couple days.
I also used this on two other laptops but the MSM Flash still wont install for some unknown reason. So I dont think using RSD lite is the problem.

Here's the solution
I found the solution to your problem.
Download the attachment.
Extract it.
Copy the file in the extracted folder and paste it in C:/windows/system32/drivers
Reboot your PC
And yes you must connect it directly without any hub or something.
Actually these are the RSD lite drivers which I think your PC was unable to install correctly.

Okay I will try this when I get home from school. If this doesnt work could you try sending me the MSM Flash7227 driver?

Froggywoggy25 said:
Okay I will try this when I get home from school. If this doesnt work could you try sending me the MSM Flash7227 driver?
Click to expand...
Click to collapse
It is that one only.
Sent from my XT530 using xda app-developers app

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my problem after I plugged in my phone in flash mode

Froggywoggy25 said:
This is my problem after I plugged in my phone in flash mode
Click to expand...
Click to collapse
So locate that to C:/windows/system32/drivers/the-file-i-gave-you
It will install its drivers.
OR
Alternate way is to install Motorola Software Update from here
It will install drivers automatically as it also needs phone to be switched in flash mode(i.e. through flash drivers) to update phone software.

aweosomeabhijeet said:
So locate that to C:/windows/system32/drivers/the-file-i-gave-you
It will install its drivers.
OR
Alternate way is to install Motorola Software Update from here
It will install drivers automatically as it also needs phone to be switched in flash mode(i.e. through flash drivers) to update phone software.
Click to expand...
Click to collapse
This didnt work because to update drivers my computer has to recognize the phone which it cant. I would need the driver Flash MSM7227 for it to work. If you could find that EXACT file on your computer and send it to me that would be great. I tried the two things you stated but it says the phone is not connected so I cant download the updates.
This must be very frustrating for you but thanks for your help.

Sorry to say, but you kill boatloader of your phone. That mean msm7227 device.
Sent from my XT530 using xda app-developers app

If any one wants to send me the download of the drivers use this to find them.
http://www.youtube.com/watch?v=jv60G3wH1N8

Froggywoggy25 said:
This didnt work because to update drivers my computer has to recognize the phone which it cant. I would need the driver Flash MSM7227 for it to work. If you could find that EXACT file on your computer and send it to me that would be great. I tried the two things you stated but it says the phone is not connected so I cant download the updates.
This must be very frustrating for you but thanks for your help.
Click to expand...
Click to collapse
Don't know about the problem.
Maybe 64-bit system.
And don't download moto update. Download and install only Moto software update "tool".
I sent you the same drivers. But I think the problem is my 32-bit system or your 64-bit.
No, I am not frustrated, don't worry. :laugh:
Sent from my XT530 using xda app-developers app
---------- Post added at 04:45 AM ---------- Previous post was at 04:42 AM ----------
nesham said:
Sorry to say, but you kill boatloader of your phone. That mean msm7227 device.
Sent from my XT530 using xda app-developers app
Click to expand...
Click to collapse
Is it so?
I don't think so.
Have you experienced the same?
Sent from my XT530 using xda app-developers app

Check the link how to obtain the right files for the drivers. Second post from the top of page 2
And its unfortunate we are in very different time zones so its one to two posts per day and we have to wait
And Ive been frustrated since July because I still cant believe I deleted that file xD

Froggywoggy25 said:
Check the link how to obtain the right files for the drivers. Second post from the top of page 2
And its unfortunate we are in very different time zones so its one to two posts per day and we have to wait
And Ive been frustrated since July because I still cant believe I deleted that file xD
Click to expand...
Click to collapse
I know that I have given you the same file.
Don't know why it isn't working.
Sent from my XT530 using xda app-developers app

Are you sure? Because a lot of my things had two different files. Mind quickly checking again?

Froggywoggy25 said:
Are you sure? Because a lot of my things had two different files. Mind quickly checking again?
Click to expand...
Click to collapse
See yourself.
This is when my phone is connected in flash mode.

Okay well thanks for checking

Im thinking about getting another phone because this one is bust.
Im thinking about getting this phone again or getting the mytouch 4g non-slide.
Which one would be better?

Froggywoggy25 said:
Im thinking about getting another phone because this one is bust.
Im thinking about getting this phone again or getting the mytouch 4g non-slide.
Which one would be better?
Click to expand...
Click to collapse
Don't buy this crap again
Sent from my XT530 using xda app-developers app

Downgrade From Ported SU760 to P920 Unpossible????

So guys , Hello everybody !
I trying 1 month to downgrade my P920 from Su760 , and i thing so i most throw away my P920 , becouse downgrade is unpossible.
I write all steps what i do:
1.Install Windows 7 Fresh 64bit with all original drivers ( USB 3.0 )
2.Install Drivers for Omap , from folder omap4boot-for_optimus-v1.18a , (26.01.2010)
3.LG Usb Drivers:
3.1 Install first LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0 driver
3.2 Install second LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0 driver
3.3 P.S. USB : LGE CDMA Compositie USB Device
COM : LGE CDMA USB Serial Port (COM41)(changed port from 7 to 41)
4.Install Lg Flash Tool to directory - (C:\LG\LGFlashTool) (ver:1.0.0.0) , and use crack
So let's start , and try to do this !!!
5.Start LG FlashTool , in settings i put 1 port and other OFF , and ready to flash (use only BOOTV21E_AP.bin and LGP920_110622.dll)
6.Start start_fastboot.bat and put 2 option and press enter
7.In phone hold VOL+ , connect cabel and when i see in screen wait 5 sec i put battery in phone. so i see that
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Okay LG Flash tool start flashing and get error in 28%
8. NOW I TRYING TO START NORMAL DOWNLOAD MODE AND NOTHING , i just listen sound connect and disconnect USB when i trying to flash from LG FLASHTOLL....
Guys please if you know some ideas please help me :crying::crying::crying::crying::crying:

GeFGear said:
So guys , Hello everybody !
I trying 1 month to downgrade my P920 from Su760 , and i thing so i most throw away my P920 , becouse downgrade is unpossible.
I write all steps what i do:
1.Install Windows 7 Fresh 64bit with all original drivers ( USB 3.0 )
2.Install Drivers for Omap , from folder omap4boot-for_optimus-v1.18a , (26.01.2010)
3.LG Usb Drivers:
3.1 Install first LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0 driver
3.2 Install second LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0 driver
3.3 P.S. USB : LGE CDMA Compositie USB Device
COM : LGE CDMA USB Serial Port (COM41)(changed port from 7 to 41)
4.Install Lg Flash Tool to directory - (C:\LG\LGFlashTool) (ver:1.0.0.0) , and use crack
So let's start , and try to do this !!!
5.Start LG FlashTool , in settings i put 1 port and other OFF , and ready to flash (use only BOOTV21E_AP.bin and LGP920_110622.dll)
6.Start start_fastboot.bat and put 2 option and press enter
7.In phone hold VOL+ , connect cabel and when i see in screen wait 5 sec i put battery in phone. so i see that
Okay LG Flash tool start flashing and get error in 28%
8. NOW I TRYING TO START NORMAL DOWNLOAD MODE AND NOTHING , i just listen sound connect and disconnect USB when i trying to flash from LG FLASHTOLL....
Guys please if you know some ideas please help me :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I also have similar case as you say!

100% the same as me .
Hit Thanks Button If I Helped

dotiep0402 said:
I also have similar case as you say!
Click to expand...
Click to collapse
And me to here (from holland)

So no ideas ????

people just read for gods sake ..i successfully downgraded...but the tutorial u r using is for BRICKED PHONES BRICKED PHONES NOT TO DOWNGRADE ..IF U WANNA DOWNGRADE DO IT WITH THE NORMAL LG FLASH TOOL
Sent from my LG-P920 using xda app-developers app

Here is how I did it :
1. Flash BOOTV21E ROM bin file with LG Flash Tool, just the way you flashed ICS bin before.
2. After the flashing end, flash the same way the baseband file your going to use.
3. Enjoy Gingerbread.
I didn't reinstall windows or omap drivers or anything. Used the same drivers an LG flash tool that I used for ICS.
About the constant connect/disconnect - I have the same problem, no idea why this is happening. So here is what I do - Start flashing, disconnect the phone, then i DONT remove the battery, just reconnect while pressing VOL+ and keep pressing it until I see in device manager port 41, after that everything goes fine.

alphatia said:
people just read for gods sake ..i successfully downgraded...but the tutorial u r using is for BRICKED PHONES BRICKED PHONES NOT TO DOWNGRADE ..IF U WANNA DOWNGRADE DO IT WITH THE NORMAL LG FLASH TOOL
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
You mean i can flash from 4.0.4 XBSALL to original 21E."KDZ" ????

Yes but itsbetter to flash bin cuz kdz didnt work for me...
Sent from my LG-P920 using xda app-developers app
---------- Post added at 08:30 PM ---------- Previous post was at 08:28 PM ----------
And if u r bricked and device cant detect lg driver use xbsalls tutorial
Sent from my LG-P920 using xda app-developers app

alphatia said:
Yes but itsbetter to flash bin cuz kdz didnt work for me...
Sent from my LG-P920 using xda app-developers app
---------- Post added at 08:30 PM ---------- Previous post was at 08:28 PM ----------
And if u r bricked and device cant detect lg driver use xbsalls tutorial
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
XBSALL tutorial didn't work for me i was trying one month

GeFGear said:
XBSALL tutorial didn't work for me i was trying one month
Click to expand...
Click to collapse
xbsalls tutorial is for bricked devices...
if you can get into download mode then your phone is not bricked
all you got to do is download bootv21e.rar from here, unpack it and flash the .bin..

TMProduct1onZ said:
xbsalls tutorial is for bricked devices...
if you can get into download mode then your phone is not bricked
all you got to do is download bootv21e.rar from here, unpack it and flash the .bin..
Click to expand...
Click to collapse
Okay, but how i can go to download mode now ??? when i hold vol + and connect cable nothing is happend ....
Sure i can install back 4.0.4 if i use u-boot.
And when i try to flash 2.3.5 my phone is didn't start , and again i can use only u-boot to instal 4.0.4

GeFGear said:
Okay, but how i can go to download mode now ??? when i hold vol + and connect cable nothing is happend ....
Sure i can install back 4.0.4 if i use u-boot.
And when i try to flash 2.3.5 my phone is didn't start , and again i can use only u-boot to instal 4.0.4
Click to expand...
Click to collapse
There are few devices that cant downgrade.. so if you flash bootv21e and your phone doesnt start then you are stuck with the ics port till somebody find a fix for that :/
Sent from my P920 using ICS 4.0.4 by XBSA

I downgrage success!
But that finished downgrage it reported SD card is not Damaged, so to reformat.
You should make a copy of all data and stored on your computer.
Guide: Solution
LG FlashTool will recognise the phone and flash it completely this time.
P920 after a reboot will go to CWM. You can flash your personal backup or reboot to STOCK V21E.
Thanks xbsall! :good: :laugh:

I tried every evey method , every ttutorial . But the phone can't boot without u-boot and install ics .
But ics is working fine better than GB
Hit Thanks Button If I Helped

OS_Hacking said:
I tried every evey method , every ttutorial . But the phone can't boot without u-boot and install ics .
But ics is working fine better than GB
Hit Thanks Button If I Helped
Click to expand...
Click to collapse
Originally Posted by TMProduct1onZ View Post
If you are not afraid of Flashing and ready to take the Risk:
-Read this Guide several Times 'till you REALLY understand EVERYTHING
-download/install all Files that are attached
-download XBSA404_AP.bin from HERE
-flash it via LG FlashTool 1.2 (1.1 is also ok..)
I hope i could help
Click to expand...
Click to collapse
Thanks TMProduct1onZ !

I downgraded it to GB without a single problem.
Sent from my LG-P920 using xda app-developers app

grish said:
I downgraded it to GB without a single problem.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
How you do that ??? you can write all steps ? and all details ? Thanx

Follow xbsals unbrick tutorial if it doesn't work your stuck on ics till somebody finds a way
Sent from my LG Optimus 3D using Tapatalk

[Solved][Q]Galaxy tab 2 10.1 p5110 Firmware upgrade encountered an issue

I flashed the cm rom,then wanted to go back to stock JB,and flashed the firmware over ODIN,suceeded.Then it was stuck in a bootloop.I flashed a any-root Stock kernel.still bootloop now on kernel logo,then i tried instaling TWRP,and it FAIL-ed and the TAB froze on the ODIN mode.i turned it off and got the error that firmware upgrade encountered an error and error(phone-yellow triangle--PC) icon.
Please help me!! :crying:
EDIT:
SOLVED!
PLUG the tablet in the PC,no matter if that error is there,just plug it
start ODIN,it should accept the device and flash the stock firmware(PDA)

Either Kies (safe)
Or odin (development)

dailyuse17 said:
Either Kies (safe)
Or odin (development)
Click to expand...
Click to collapse
Kies didnt even recognise it.
Odin is safest and best.For odin you have 4 steps for flashing,and in Kies you have 12 unreasonable steps.
Sent from my ST15i using xda premium

Marionette said:
EDIT:
SOLVED!
PLUG the tablet in the PC,no matter if that error is there,just plug it
start ODIN,it should accept the device and flash the stock firmware(PDA)
Click to expand...
Click to collapse
Whew!!! Found this and recovered my tablet. I was in the middle of flashing it when a co-worker picked it up and the cable came out. Thanks!!

cpufixrman said:
Whew!!! Found this and recovered my tablet. I was in the middle of flashing it when a co-worker picked it up and the cable came out. Thanks!!
Click to expand...
Click to collapse
Glad to help
Sent from my GT-P5110 using XDA Premium HD app

Marionette said:
I flashed the cm rom,then wanted to go back to stock JB,and flashed the firmware over ODIN,suceeded.Then it was stuck in a bootloop.I flashed a any-root Stock kernel.still bootloop now on kernel logo,then i tried instaling TWRP,and it FAIL-ed and the TAB froze on the ODIN mode.i turned it off and got the error that firmware upgrade encountered an error and error(phone-yellow triangle--PC) icon.
Please help me!! :crying:
EDIT:
SOLVED!
PLUG the tablet in the PC,no matter if that error is there,just plug it
start ODIN,it should accept the device and flash the stock firmware(PDA)
Click to expand...
Click to collapse
I can't find the stock firmware for my p5113. I'm downloading something right now that I think is it, but I'm not sure.

dbrinkley3 said:
I can't find the stock firmware for my p5113. I'm downloading something right now that I think is it, but I'm not sure.
Click to expand...
Click to collapse
Looked for p113,but nothing.
Not sure,but with roms,it is said to use p5110 builds.
But i am not sure about firmwares...
Sent from my GT-P5110 using XDA Premium HD app

Marionette said:
Looked for p113,but nothing.
Not sure,but with roms,it is said to use p5110 builds.
But i am not sure about firmwares...
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
Idk, I've just been stuck on this "Firmware upgrage encountered an issue" screen for a while now. I got it after I tried to root my device, but then realized I downloaded p5100 instead of p5113. I kept going to the cwm screen and trying to install it because I didn't realize it was the wrong one, and then on reboot it came to this screen. And piece of **** Kies says it can't connect to my device. It'll just keep saying "Connecting" and then pop up saying error please reboot device.

dbrinkley3 said:
Idk, I've just been stuck on this "Firmware upgrage encountered an issue" screen for a while now. I got it after I tried to root my device, but then realized I downloaded p5100 instead of p5113. I kept going to the cwm screen and trying to install it because I didn't realize it was the wrong one, and then on reboot it came to this screen. And piece of **** Kies says it can't connect to my device. It'll just keep saying "Connecting" and then pop up saying error please reboot device.
Click to expand...
Click to collapse
Keep looking for the firmware for p5113,and when you find it,flash with odin and it will work.
Sent from my GT-P5110 using XDA Premium HD app

Not recognized
The Marionette said:
Glad to help
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
My Tab 2 is not even being recognized by ODIN or Kies. The screen about frimware upgrade fail shows up and that is all...Any suggestions?
Thank You,

I had that too!
mrsmalley said:
My Tab 2 is not even being recognized by ODIN or Kies. The screen about frimware upgrade fail shows up and that is all...Any suggestions?
Thank You,
Click to expand...
Click to collapse
To fix this just follow these steps:
1. plug the tablet into your pc
2. open up device manager and delete the driver with the yellow triangle
3. re insert your usb cable and you tablet will pop up in odin!
I foud it out and it worked for me!
but if this did't work try it again until it works.

I cant get mine to work with the rom or odin, still says firmware upgrade failed and stays like that, cant get into recovery mode anymore
mrsmalley said:
My Tab 2 is not even being recognized by ODIN or Kies. The screen about frimware upgrade fail shows up and that is all...Any suggestions?
Thank You,
Click to expand...
Click to collapse

Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
How can i flash the stock firmware if the tablet can't go on "Download Mode"?

willybar said:
Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
How can i flash the stock firmware if the tablet can't go on "Download Mode"?
Click to expand...
Click to collapse
Does Odin recognize it?

champ1919 said:
Does Odin recognize it?
Click to expand...
Click to collapse
Yes: but fails
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Inviato dal mio SM-G900F utilizzando Tapatalk

Please Help me Fastboot AC

hi guys my friend gave me this one x with one problem, phone is rooted. The issue is there is no OS on the phone. It will only boot into TWRP. he accidentally deleted everything and now I cannot get a rom copied back to it. When plugged up to a PC via USB, I always get "Unknown device" error from PC. Tried ADB but cannot get the phone to go to Fastboot USB
Bootloader says Fastboot AC look the pictures
Thank u very much for ur help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL][/IMG]

Download min adb fastboot and let PC see the device. Then run a ruu via fastboot
Sent from my One X using Tapatalk
---------- Post added at 01:50 AM ---------- Previous post was at 01:44 AM ----------
Follow this thread.
http://forum.xda-developers.com/showthread.php?t=2593037
Sent from my One X using Tapatalk

Exactly what I would have said, good advice.
Sent from my Evita

marknoll said:
Download min adb fastboot and let PC see the device. Then run a ruu via fastboot
Sent from my One X using Tapatalk
---------- Post added at 01:50 AM ---------- Previous post was at 01:44 AM ----------
Follow this thread.
http://forum.xda-developers.com/showthread.php?t=2593037
Sent from my One X using Tapatalk
Click to expand...
Click to collapse
Hi., thanks for ur help
I do not understand that I do, i have the Minimal ADB and Fastboot and my phone dont show fastboot USB
just fastboot or fastboot AC and i type fastbooot devices and nothing appears

Open cmd window inside min adb.. On open field,hold shift right click and chose "open cmd here" in that cmd prompt type fastboot devices. See if it sees it now. More than likely drivers will install once u open cmd in min adb. Try that
Sent from my One X using Tapatalk

Have you actually installed any drivers? If you don't have drivers installed no amount of messing around with fastboot is going to work. You can get the drivers by installing HTC Sync Manager, then connecting the phone in fastboot mode, and the drivers should install.
Sent from my Evita

timmaaa said:
Have you actually installed any drivers? If you don't have drivers installed no amount of messing around with fastboot is going to work. You can get the drivers by installing HTC Sync Manager, then connecting the phone in fastboot mode, and the drivers should install.
Sent from my Evita
Click to expand...
Click to collapse
nothing happen
i have installed HTC Sync Manager and htc Driver when i plug the phone show fastboot ac and the computer show unknown device
and sometimes when i plug says Fastboot Never Fastboot USB the pc never recognized

marknoll said:
Open cmd window inside min adb.. On open field,hold shift right click and chose "open cmd here" in that cmd prompt type fastboot devices. See if it sees it now. More than likely drivers will install once u open cmd in min adb. Try that
Sent from my One X using Tapatalk
Click to expand...
Click to collapse
fastboot devices doesnt show anything

It's possible that you have a faulty usb port on the phone, it shouldn't usually say fastboot ac on the screen while connected to a usb outlet. Are you using a usb 2.0 port?
Sent from my Evita

timmaaa said:
It's possible that you have a faulty usb port on the phone, it shouldn't usually say fastboot ac on the screen while connected to a usb outlet. Are you using a usb 2.0 port?
Sent from my Evita
Click to expand...
Click to collapse
i think is the usb charge port
yes 2.0

What do you mean usb charge port?
Sent from my Evita

timmaaa said:
What do you mean usb charge port?
Sent from my Evita
Click to expand...
Click to collapse

I'll open it right now to see, i tell u later

juan0089 said:
fastboot devices doesnt show anything
Click to expand...
Click to collapse
Tim is right in the ports..maybe corrupt. But u opened a cmd prompt in ADT. Do so in min adb fastboot program. I had to do that when my drivers didn't properly install. When I opened cmd in min adb, drivers installed for me
P.s. make sure your device is in fastboot mode when opening cmd in min adb
Sent from my One X using Tapatalk

What was the outcome Juan?
Sent from my One X using Tapatalk

Did you fix this?

marknoll said:
What was the outcome Juan?
Sent from my One X using Tapatalk
Click to expand...
Click to collapse
I bought the charger ports and they sent me wrong, I'm waiting for the new wing for repair

Be very careful opening it up, LCD is VERY sensitive. I learned the hard way. ?