So guys , Hello everybody !
I trying 1 month to downgrade my P920 from Su760 , and i thing so i most throw away my P920 , becouse downgrade is unpossible.
I write all steps what i do:
1.Install Windows 7 Fresh 64bit with all original drivers ( USB 3.0 )
2.Install Drivers for Omap , from folder omap4boot-for_optimus-v1.18a , (26.01.2010)
3.LG Usb Drivers:
3.1 Install first LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0 driver
3.2 Install second LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0 driver
3.3 P.S. USB : LGE CDMA Compositie USB Device
COM : LGE CDMA USB Serial Port (COM41)(changed port from 7 to 41)
4.Install Lg Flash Tool to directory - (C:\LG\LGFlashTool) (ver:1.0.0.0) , and use crack
So let's start , and try to do this !!!
5.Start LG FlashTool , in settings i put 1 port and other OFF , and ready to flash (use only BOOTV21E_AP.bin and LGP920_110622.dll)
6.Start start_fastboot.bat and put 2 option and press enter
7.In phone hold VOL+ , connect cabel and when i see in screen wait 5 sec i put battery in phone. so i see that
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Okay LG Flash tool start flashing and get error in 28%
8. NOW I TRYING TO START NORMAL DOWNLOAD MODE AND NOTHING , i just listen sound connect and disconnect USB when i trying to flash from LG FLASHTOLL....
Guys please if you know some ideas please help me :crying::crying::crying::crying::crying:
GeFGear said:
So guys , Hello everybody !
I trying 1 month to downgrade my P920 from Su760 , and i thing so i most throw away my P920 , becouse downgrade is unpossible.
I write all steps what i do:
1.Install Windows 7 Fresh 64bit with all original drivers ( USB 3.0 )
2.Install Drivers for Omap , from folder omap4boot-for_optimus-v1.18a , (26.01.2010)
3.LG Usb Drivers:
3.1 Install first LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0 driver
3.2 Install second LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0 driver
3.3 P.S. USB : LGE CDMA Compositie USB Device
COM : LGE CDMA USB Serial Port (COM41)(changed port from 7 to 41)
4.Install Lg Flash Tool to directory - (C:\LG\LGFlashTool) (ver:1.0.0.0) , and use crack
So let's start , and try to do this !!!
5.Start LG FlashTool , in settings i put 1 port and other OFF , and ready to flash (use only BOOTV21E_AP.bin and LGP920_110622.dll)
6.Start start_fastboot.bat and put 2 option and press enter
7.In phone hold VOL+ , connect cabel and when i see in screen wait 5 sec i put battery in phone. so i see that
Okay LG Flash tool start flashing and get error in 28%
8. NOW I TRYING TO START NORMAL DOWNLOAD MODE AND NOTHING , i just listen sound connect and disconnect USB when i trying to flash from LG FLASHTOLL....
Guys please if you know some ideas please help me :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I also have similar case as you say!
100% the same as me .
Hit Thanks Button If I Helped
dotiep0402 said:
I also have similar case as you say!
Click to expand...
Click to collapse
And me to here (from holland)
So no ideas ????
people just read for gods sake ..i successfully downgraded...but the tutorial u r using is for BRICKED PHONES BRICKED PHONES NOT TO DOWNGRADE ..IF U WANNA DOWNGRADE DO IT WITH THE NORMAL LG FLASH TOOL
Sent from my LG-P920 using xda app-developers app
Here is how I did it :
1. Flash BOOTV21E ROM bin file with LG Flash Tool, just the way you flashed ICS bin before.
2. After the flashing end, flash the same way the baseband file your going to use.
3. Enjoy Gingerbread.
I didn't reinstall windows or omap drivers or anything. Used the same drivers an LG flash tool that I used for ICS.
About the constant connect/disconnect - I have the same problem, no idea why this is happening. So here is what I do - Start flashing, disconnect the phone, then i DONT remove the battery, just reconnect while pressing VOL+ and keep pressing it until I see in device manager port 41, after that everything goes fine.
alphatia said:
people just read for gods sake ..i successfully downgraded...but the tutorial u r using is for BRICKED PHONES BRICKED PHONES NOT TO DOWNGRADE ..IF U WANNA DOWNGRADE DO IT WITH THE NORMAL LG FLASH TOOL
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
You mean i can flash from 4.0.4 XBSALL to original 21E."KDZ" ????
Yes but itsbetter to flash bin cuz kdz didnt work for me...
Sent from my LG-P920 using xda app-developers app
---------- Post added at 08:30 PM ---------- Previous post was at 08:28 PM ----------
And if u r bricked and device cant detect lg driver use xbsalls tutorial
Sent from my LG-P920 using xda app-developers app
alphatia said:
Yes but itsbetter to flash bin cuz kdz didnt work for me...
Sent from my LG-P920 using xda app-developers app
---------- Post added at 08:30 PM ---------- Previous post was at 08:28 PM ----------
And if u r bricked and device cant detect lg driver use xbsalls tutorial
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
XBSALL tutorial didn't work for me i was trying one month
GeFGear said:
XBSALL tutorial didn't work for me i was trying one month
Click to expand...
Click to collapse
xbsalls tutorial is for bricked devices...
if you can get into download mode then your phone is not bricked
all you got to do is download bootv21e.rar from here, unpack it and flash the .bin..
TMProduct1onZ said:
xbsalls tutorial is for bricked devices...
if you can get into download mode then your phone is not bricked
all you got to do is download bootv21e.rar from here, unpack it and flash the .bin..
Click to expand...
Click to collapse
Okay, but how i can go to download mode now ??? when i hold vol + and connect cable nothing is happend ....
Sure i can install back 4.0.4 if i use u-boot.
And when i try to flash 2.3.5 my phone is didn't start , and again i can use only u-boot to instal 4.0.4
GeFGear said:
Okay, but how i can go to download mode now ??? when i hold vol + and connect cable nothing is happend ....
Sure i can install back 4.0.4 if i use u-boot.
And when i try to flash 2.3.5 my phone is didn't start , and again i can use only u-boot to instal 4.0.4
Click to expand...
Click to collapse
There are few devices that cant downgrade.. so if you flash bootv21e and your phone doesnt start then you are stuck with the ics port till somebody find a fix for that :/
Sent from my P920 using ICS 4.0.4 by XBSA
I downgrage success!
But that finished downgrage it reported SD card is not Damaged, so to reformat.
You should make a copy of all data and stored on your computer.
Guide: Solution
LG FlashTool will recognise the phone and flash it completely this time.
P920 after a reboot will go to CWM. You can flash your personal backup or reboot to STOCK V21E.
Thanks xbsall! :good: :laugh:
I tried every evey method , every ttutorial . But the phone can't boot without u-boot and install ics .
But ics is working fine better than GB
Hit Thanks Button If I Helped
OS_Hacking said:
I tried every evey method , every ttutorial . But the phone can't boot without u-boot and install ics .
But ics is working fine better than GB
Hit Thanks Button If I Helped
Click to expand...
Click to collapse
Originally Posted by TMProduct1onZ View Post
If you are not afraid of Flashing and ready to take the Risk:
-Read this Guide several Times 'till you REALLY understand EVERYTHING
-download/install all Files that are attached
-download XBSA404_AP.bin from HERE
-flash it via LG FlashTool 1.2 (1.1 is also ok..)
I hope i could help
Click to expand...
Click to collapse
Thanks TMProduct1onZ !
I downgraded it to GB without a single problem.
Sent from my LG-P920 using xda app-developers app
grish said:
I downgraded it to GB without a single problem.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
How you do that ??? you can write all steps ? and all details ? Thanx
Follow xbsals unbrick tutorial if it doesn't work your stuck on ics till somebody finds a way
Sent from my LG Optimus 3D using Tapatalk
Related
is there away to fix the optimus 3d devices that cant downgrade to gb?
xbsall said:
...it can be fixed...if somebody has the time and knowledge to fix it. (not me :highfive: )
Click to expand...
Click to collapse
Sent from my P920 using ICS 4.0.4 by XBSA
TMProduct1onZ said:
Sent from my P920 using ICS 4.0.4 by XBSA
Click to expand...
Click to collapse
well i hope they do sooooon btw ics is out for europe lg 2x maybe we are next
btw why can't it be downgraded
Sent from my LG-P920 using xda app-developers app
Can you please pm me too
Sent from my LG Optimus 3D using Tapatalk
we seriosly ^_^ not one guide is not help to as
i do all steps at instruction
So guys , Hello everybody !
I trying 1 month to downgrade my P920 from Su760 , and i thing so i most throw away my P920 , becouse downgrade is unpossible.
I write all steps what i do:
1.Install Windows 7 Fresh 64bit with all original drivers ( USB 3.0 )
2.Install Drivers for Omap , from folder omap4boot-for_optimus-v1.18a , (26.01.2010)
3.LG Usb Drivers:
3.1 Install first LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0 driver
3.2 Install second LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0 driver
3.3 P.S. USB : LGE CDMA Compositie USB Device
COM : LGE CDMA USB Serial Port (COM41)(changed port from 7 to 41)
4.Install Lg Flash Tool to directory - (C:\LG\LGFlashTool) (ver:1.0.0.0) , and use crack
So let's start , and try to do this !!!
5.Start LG FlashTool , in settings i put 1 port and other OFF , and ready to flash (use only BOOTV21E_AP.bin and LGP920_110622.dll)
6.Start start_fastboot.bat and put 2 option and press enter
7.In phone hold VOL+ , connect cabel and when i see in screen wait 5 sec i put battery in phone. so i see that
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Okay LG Flash tool start flashing and get error in 28%
8. NOW I TRYING TO START NORMAL DOWNLOAD MODE AND NOTHING , i just listen sound connect and disconnect USB when i trying to flash from LG FLASHTOLL....
Guys please if you know some ideas please help me :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
and so that is all correct but my phone is stack in 4.0.4 for ever
The same as me . Stuck in ICS 4ever .
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped
Try this;
Be sure ported ics is installed.
Ready the gb rom with lg flash tool
Shut it down.
Remove the battery.
Ready the battery to be put back in.
Connect the usb cable while holding down volume +
Wait for the second connected sound.
When you hear it put the battery back in.
It should go into download mode with some korean s
uff on the screen.
Flashtool will take over and flash the gb.
What we did is we skipped omapboot because the device is already able to enter the download mode , therefore not really bricked...
The guide is for bricked devices that cannot go into download mode.
Good Luck
Sent from my LG-P920 using xda app-developers app
boltthrower56 said:
Try this;
Be sure ported ics is installed.
Ready the gb rom with lg flash tool
Shut it down.
Remove the battery.
Ready the battery to be put back in.
Connect the usb cable while holding down volume +
Wait for the second connected sound.
When you hear it put the battery back in.
It should go into download mode with some korean s
uff on the screen.
Flashtool will take over and flash the gb.
What we did is we skipped omapboot because the device is already able to enter the download mode , therefore not really bricked...
The guide is for bricked devices that cannot go into download mode.
Good Luck
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
I tried this method with 3 different *.bin GB software and all of them stuck in LG logo or not boot .
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped
I use a particular method i not read in guide and works everytime:
after i open flashtool, select the bin file i start clicking the right arrow icon, THEN i keep pressed the vol + button and connect the USB cable
It not works everytime with WINDOWS 7 64 bit even if i reinstall drivers, but IT WORKS EVERYTIME with windows XP
Pesach85 said:
I use a particular method i not read in guide and works everytime:
after i open flashtool, select the bin file i start clicking the right arrow icon, THEN i keep pressed the vol + button and connect the USB cable
It not works everytime with WINDOWS 7 64 bit even if i reinstall drivers, but IT WORKS EVERYTIME with windows XP
Click to expand...
Click to collapse
sorry but i not understand , what yo start clicking ? and how it's help to as ?
OS_Hacking said:
I tried this method with 3 different *.bin GB software and all of them stuck in LG logo or not boot.
Hit Thanks Button If I Helped
Click to expand...
Click to collapse
If you're stuck in the LG logo then it should be able to enter the download mode.
Find a bin rom or kdz other than v21e then flash it , see if it works.
Also could be because of Win 7 or x64 , mine was XP.
Create another partition install xp in there and dual boot to Xp.
I did this and mine downgraded.
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped[/QUOTE]
GeFGear said:
sorry but i not understand , what yo start clicking ? and how it's help to as ?
Click to expand...
Click to collapse
The clicking at the right arrow is just a reference to the normal way you activate the flash with lgflashtool.
I just suggested a secure way to flash, in case your flash goes not fine.
Last message when you are flashing baseband must be "Invalid ap path" and after you flash the bin file must be target resetting or reset.
We are talking here about o3ds that wont boot after installing gb...i have 2 o3d one of them downgraded successfully with lg flash tool but the other one just doesnt boot after flashing it with lg flash tool
And the flashing proccess finishes correctly but the phone doesnt boot up not even lg..but if i flash ics it works perfectly and biits normally..i tried both smartflash and lg kdz flash but i just cant downgrade
Sent from my LG-SU760 using xda app-developers app
alphatia said:
We are talking here about o3ds that wont boot after installing gb...i have 2 o3d one of them downgraded successfully with lg flash tool but the other one just doesnt boot after flashing it with lg flash tool
And the flashing proccess finishes correctly but the phone doesnt boot up not even lg..but if i flash ics it works perfectly and biits normally..i tried both smartflash and lg kdz flash but i just cant downgrade
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Try entering recovery mode and doing a factory reset then see if it boots
Sent from my LG-SU760 using xda app-developers app
alphatia said:
We are talking here about o3ds that wont boot after installing gb...i have 2 o3d one of them downgraded successfully with lg flash tool but the other one just doesnt boot after flashing it with lg flash tool
And the flashing proccess finishes correctly but the phone doesnt boot up not even lg..but if i flash ics it works perfectly and biits normally..i tried both smartflash and lg kdz flash but i just cant downgrade
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Once again I must remind to all of you that this method of downgrading/resurrection won't work for everyone. There are "a few" devices that need a different bin file so if you are "certain" that you did everything right but your phone doesnt start with BOOTV21E and only starts with ported ICS you need that specific bin (which is not available because nobody who had the same problem made it).
xbsall said:
Once again I must remind to all of you that this method of downgrading/resurrection won't work for everyone. There are "a few" devices that need a different bin file so if you are "certain" that you did everything right but your phone doesnt start with BOOTV21E and only starts with ported ICS you need that specific bin (which is not available because nobody who had the same problem made it).
Click to expand...
Click to collapse
Technically is a matter of board revision, sector of memory or similar issue?
Don't know cause I never had the chance to troubleshoot it or spend some time on a device with this specific problem so anything I say will be wrong.
Well I am sure I have done every thing right I flashed bootv21e more than 9 times yesterday with different scenarios ...and tried 21e kdz and tried using smart flash but still can't boot the device ...but once I flash ice the device boots properly..
.I think the problem is in the partition because when boot21e is installed and won't boot I tried wpkark alternate boot and boot.king won't flash due to partition doesn't exist.. and recovery flashes but also never starts it just shows loading and the device turns off ...SO I THINK THE PROBLEM IS IN THE PARTITIONS ..any ideas will be help full and I will try them..
Sent from my LG-P920 using xda app-developers app
Will flashing froyo fix it iwill try it now
Sent from my LG-SU760 using xda app-developers app
This guide is for those who want to unbrick their LG Optimus 3D P920/5 and SU760 that cannot enter normal download mode anymore.
A) REQUIREMENTS:
LG Drivers: Link 1 http://d-h.st/gDp Link 2 https://docs.google.com/file/d/0B1FQhnEqbKk0bEVxTTVHdjVoMEk/edit?usp=drive_web
[*]Smartflash: Link 1 http://d-h.st/JZG Link 2 https://docs.google.com/file/d/0B1FQhnEqbKk0OVNnZ3V3U2YteHM/edit?usp=sharing
Recovery ROMs:
P920 Users: Link 1 http://d-h.st/pCX Link 2 https://docs.google.com/file/d/0B1FQhnEqbKk0WGQ0WC1KekVtb2M/edit?usp=sharing (Credits to xbsall)
P925 Users: Link 1 http://d-h.st/z74 Link 2 https://docs.google.com/file/d/0B1FQhnEqbKk0a1RoeUxuTGZZd0U/edit?usp=sharing
P925G Users: Link 1 https://docs.google.com/file/d/0B1FQhnEqbKk0Y0lZR0dTLU1XVzg/edit?usp=sharing
SU760 Users: Link 1 http://d-h.st/JVI Link 2 https://docs.google.com/file/d/0B1FQhnEqbKk0ZGhSZzBMYnpUWU0/edit?usp=sharing (Credits to xbsall)
If you don't find your model listed, check this page http://lg-phone-firmware.com/firmware-Lg+Optimus+3D-Tutti-2.html and extract the kdz firmware you chose to 2 files bin and fls using this tool http://d-h.st/kIz
Flashing tools:
For P920/5: OS_Hacking Utility https://docs.google.com/file/d/0B1FQhnEqbKk0dHgyRFdPMmgwTFU/edit?usp=sharing (Credits to OS_Hacking)
For SU760: Android Platform-Tools http://d-h.st/xTy and SU760 Tools http://d-h.st/QT0
Omap4boot: Link 1 http://d-h.st/0Sb Link 2 https://docs.google.com/file/d/0B1FQhnEqbKk0eHJWWVZ5SjI3NHc/edit?usp=sharing (Credits to WKPARKS)
Optional: Omap4boot (EMU Version): (For users experiencing error 121) Link 1 http://d-h.st/AAF Link 2 https://docs.google.com/file/d/0B1FQhnEqbKk0Z3FhSl9PYjJuV2c/edit?usp=sharing
B) INSTRUCTIONS:
1- Install LG Drivers: Extract "LG Driver.zip" and install both "LG Drivers (1)" and "LG Drivers (2)".
2- Remove the battery and plug your phone with usb cable into your PC WHILE holding vol-up. OMAP4430 device will appears, you must install the usb_drv_windows driver included in Omap4boot ( In windows 7, if OMAP4430 device appear for seconds and then disappear in your Windows Device Manager, run a cmd as an admin and type :" SET DEVMGR_SHOW_NONPRESENT_DEVICES=1 " and press enter, then type :" devmgmt.msc " and press enter. Choose View, Show Hidden Devices, you will see now your hidden OMAP4430 device. You may now proceed to the driver installation). Keep the Windows Device Manager opened.
3- Run start_fastboot.bat and select the option depending on your device model from Omap4boot folder.
4- With the battery still removed, hold vol-up, connect your phone using the usb cable and KEEP HOLDING vol-up.
If you get "error 121", use the optional omap4boot (EMU version) and choose option 3
5- The usbboot will start, insert the battery.
6- Your phone is now in download mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7- Open device manager, select the LG port and open its properties by a right-click. Go to port settings tab, then click on advanced button. When you see a drop down menu, click on it and change the port number to com41.
Steps From 8 to 15 are for P920/5 only:
8- Unplug the usb cable, then run OS_HACKING tool.
9- Pull out the battery, hold vol-up and connect your phone using the usb cable but don't keep on holding vol-up after plugging the usb cable after putting the battery.
10- Your phone should be now in fastboot mode.
11- In device manager, you will see LG COSMO, install now its driver which is included in OS_HACKING package.
12- Now one more time run OS_HACKING tool, hold vol-up and connect your phone using the usb cable but don't keep on holding vol-up after plugging the usb cable after putting the battery. Your phone shou be in fastboot mode now.
13- Flash the GB bootloaders then flash CWM recovery.
14- Unplug the USB cable. Remove then insert your battery. If your phone boots, follow the next steps, if not, go back to download mode from omap4boot and flash your ROM (in ROM COPY TAB) using smartflash which won't be able to complete the flashing process. Then continue to the next steps (this method actually worked for me but don't forget to open windowsenabler before ).
15- If you can access cwm recovery, then you can try flashing a ROM or you can follow my next steps.
Steps from 16 to 18 are for SU760 only:
16- Run start_fastboot.bat and select the option depending on your device model from Omap4boot folder.
17- With the battery still removed, hold vol-up, connect your phone using the usb cable but DON'T HOLD vol-up.
18- You should be now in fastboot mode. Now from the platform-tools folder, press the right-click button and open command window here, then type the following commands:
fastboot flash x-loader files\.....\x-loader.bin
fastboot flash u-boot files\....\u-boot.bin
fastboot flash boot files\....\boot.img
fastboot flash recovery files\....\cwm.img
19- If you can access cwm recovery, then you can try flashing a ROM or you can follow my next steps.
20- Now open windowsenabler in smartflash folder then run smartflash. Choose your ROM in ROM COPY TAB.
21- Plug your phone without the battery while holding vol-up and wait till LG mobile USB SERIAL PORT gets recognized (if not try to release vol-up then hold vol-up then release it again). Try also to insert battery in after plugging your phone if it doesn't work. You might find sometimes that the 3D button will work for you, you just have to try
22- Smartflash will now recognize the port, you are in download mode but with a black screen on your phone. Now you can then start flashing process ( sometimes the device gets disconnected after 1 minute though it shouldn't do that, so just repeat the flashing process again. Usually this download mode with black screen on your phone lasts LONG ).
23- Now after finishing the process, sometimes the phone doesn't boot, just flash gb bootloaders once again.
24- CONGRATULATIONS !! YOU HAVE RESCUED YOUR LOVELY OPTIMUS 3D !!!
(If you lost your IMEI, follow this guide http://forum.xda-developers.com/showthread.php?t=1734330)
DON'T FORGET TO PRESS THE THANKS BUTTON, ANSWER THE POLL'S QUESTION AND RATE MY THREAD!!
Thank`s your work!! But i Can not be downloaded？
wyl326 said:
Thank`s your work!! But i Can not be downloaded？
Click to expand...
Click to collapse
I will fix the links when I come back home after few hours. I am so sorry but don't worry.
Which links are broken and what files cannot be downloaded ?
karimkahale said:
I will fix the links when I come back home after few hours. I am so sorry but don't worry.
Which links are broken and what files cannot be downloaded ?
Click to expand...
Click to collapse
ok.already can be download.i will try it tomorrow！
wyl326 said:
ok.already can be download.i will try it tomorrow！
Click to expand...
Click to collapse
You mean you are able to download the files now, I tried to download everything worked.
THANKS FOR THAT TUTORIAL IT FIXED MY PHONE !!
I have checked the links : all of them are working . Retry downloading again.
thank you
THANK YOU FOR YOUR TUTORIAL SIR!. I BROUGHT BACK MY PHONE FROM THE DEAD! LOL!. thank you very much.. ahm can you teach me how to update this to ICS sir? please?
rozky43 said:
THANK YOU FOR YOUR TUTORIAL SIR!. I BROUGHT BACK MY PHONE FROM THE DEAD! LOL!. thank you very much.. ahm can you teach me how to update this to ICS sir? please?
Click to expand...
Click to collapse
Do you mean "official" ICS or a ICS custom ROM?
If you have a P920/5, you can actually use this one http://forum.xda-developers.com/showthread.php?t=1963847 , it's quite smooth I've tried it.
If you have a SU760, I think that this jellybean ROM would be better CM10 : http://forum.xda-developers.com/showthread.php?t=2100611
Don't forget to press the THANKS button :highfive:
Karim Kahale said:
Do you mean "official" ICS or a ICS custom ROM?
If you have a P920/5, you can actually use this one http://forum.xda-developers.com/showthread.php?t=1963847 , it's quite smooth I've tried it.
If you have a SU760, I think that this jellybean ROM would be better CM10 : http://forum.xda-developers.com/showthread.php?t=2100611
Don't forget to press the THANKS button :highfive:
Click to expand...
Click to collapse
the CM10 was not quite impressive.. i want to try the ICS. the link that you gave me is that compatible with my phone?. LG SU760?.
Karim Kahale said:
I have checked the links : all of them are working . Retry downloading again.
Click to expand...
Click to collapse
look this. http://forum.xda-developers.com/showthread.php?p=40575068#post40575068
canyou help me?my phone is can't power on.sorry for my english.
rozky43 said:
the CM10 was not quite impressive.. i want to try the ICS. the link that you gave me is that compatible with my phone?. LG SU760?.
Click to expand...
Click to collapse
The first link is not compatible, but here you go http://forum.xda-developers.com/showthread.php?t=1963847 IT WILL WORK
wyl326 said:
look this. http://forum.xda-developers.com/showthread.php?p=40575068#post40575068
canyou help me?my phone is can't power on.sorry for my english.
Click to expand...
Click to collapse
What you have to, like I said, is berfore using OS_HACKING tool, try to flash a ROM bin file using smartflash which will basically
flash some necessary partitions, then you shall use OS_HACKING tool.
Karim Kahale said:
What you have to, like I said, is berfore using OS_HACKING tool, try to flash a ROM bin file using smartflash which will basically
flash some necessary partitions, then you shall use OS_HACKING tool.
Click to expand...
Click to collapse
can be flash every BIN.but just can`t power on .:crying:
wyl326 said:
can be flash every BIN.but just can`t power on .:crying:
Click to expand...
Click to collapse
Try to flash cwm recovery then GB bootloaders.
If it doesn't work try to flash ICS bootloaders if you were using ICS before.
If nothing works skip this step and check if you are able to access the BLACK SCREEN DOWNLOAD MODE in next steps.
Hopefully this will work
Thanks. I am going to try this. Been bricked now for two weeks, and I have no success with other threads.
Sent from my LG-P925g using xda premium
it seems that a lot of people have done it without problem...
Well, i've got some problems.
i've tried lots of times to go into fastboot mode, and fail.
i hold the volume+ button and plugged the usb cable, then i put the battery just as you say.
and it goes into charging mode.
i'm using windows 7 and i'm already did the device manager part, but still nothing...
any solution
i'll appreciate your answer
Thanks
---------- Post added at 09:17 AM ---------- Previous post was at 09:11 AM ----------
Alibieli said:
it seems that a lot of people have done it without problem...
Well, i've got some problems.
i've tried lots of times to go into fastboot mode, and fail.
i hold the volume+ button and plugged the usb cable, then i put the battery just as you say.
and it goes into charging mode.
i'm using windows 7 and i'm already did the device manager part, but still nothing...
any solution
i'll appreciate your answer
Thanks
Click to expand...
Click to collapse
Never mind.
somehow i just got it work into fastboot:victory:
Karim Kahale said:
Try to flash cwm recovery then GB bootloaders.
If it doesn't work try to flash ICS bootloaders if you were using ICS before.
If nothing works skip this step and check if you are able to access the BLACK SCREEN DOWNLOAD MODE in next steps.
Hopefully this will work
Click to expand...
Click to collapse
Hello I managed to unbrick my phone but when i tried installing ICS rom with this link http://forum.xda-developers.com/showthread.php?t=1963847
it installed in CWM then when i rebooted Only LG LOGO and the backlight comes Please Help me out i was in GingerBread
xshobx said:
Hello I managed to unbrick my phone but when i tried installing ICS rom with this link http://forum.xda-developers.com/showthread.php?t=1963847
it installed in CWM then when i rebooted Only LG LOGO and the backlight comes Please Help me out i was in GingerBread
Click to expand...
Click to collapse
Try to use smartflash to flash the bootv21e ROM included in the thread, then try to flash another ROM in CWM.
wyl326 said:
Click to expand...
Click to collapse
I repeat, did you try to partially do the smartflash operation ?
The download won't finish but don't worry it will make new partitions.
Please tell me wat r the things i need to do for installing custom rom... i m coming from motorola defy, there i just had to root the phone by connecting to pc and run superoneclick and install cwm then flash rom.... but i m new bootloader unlocking here.... what are the things i need to before start anything... please help... i just got my one s with some chinese integrated rom... please see the pics...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please tell me the steps to flash a custom rom.... thanks...
i am stuck at bootloader unlock Step 4.... i got this error pops up usb device not recognized....
what to do?? please help guys... somebody might have gone through this naa....
U dont know how to unlock bootloader and you are on superCID 11111111
vatsaman said:
U dont know how to unlock bootloader and you are on superCID 11111111
Click to expand...
Click to collapse
he maby bought it already s-offed...
---------- Post added at 03:48 AM ---------- Previous post was at 03:48 AM ----------
aneeshcphilip said:
Please tell me wat r the things i need to do for installing custom rom... i m coming from motorola defy, there i just had to root the phone by connecting to pc and run superoneclick and install cwm then flash rom.... but i m new bootloader unlocking here.... what are the things i need to before start anything... please help... i just got my one s with some chinese integrated rom... please see the pics...
Please tell me the steps to flash a custom rom.... thanks...
Click to expand...
Click to collapse
u can find bootloader unlocking instruction in developpement section. read it carefully it s not that hard.
vatsaman said:
U dont know how to unlock bootloader and you are on
Click to expand...
Click to collapse
whats so special in superCID 11111111??? i got it like this....
psykodali said:
u can find bootloader unlocking instruction in developpement section. read it carefully it s not that hard.
Click to expand...
Click to collapse
is this the thread>>>>> LINK
Yes
Envoyé depuis mon HTC One S avec Tapatalk
psykodali said:
Yes
Envoyé depuis mon HTC One S avec Tapatalk
Click to expand...
Click to collapse
do i need to upgrade to jb ota before doing any bootloader unlock and other things???
or can i directly start unlocking now?? does hboot version matters??
I cant install jb ota update.... While installation going on red triangle with exclamation mark shows up and reboot... No updation going on...
Sent from my RM-885_im_india_249 using Board Express
And I cant able to attach it via usb to mypc.... Tried installing and reinstalling HTC sync and different drivers available.... But all in vain... Should I return the item backto eBay seller or any solution available.... Help please..
Sent from my RM-885_im_india_249 using Board Express
aneeshcphilip said:
And I cant able to attach it via usb to mypc.... Tried installing and reinstalling HTC sync and different drivers available.... But all in vain... Should I return the item backto eBay seller or any solution available.... Help please..
Sent from my RM-885_im_india_249 using Board Express
Click to expand...
Click to collapse
Try using the all in one toolkit. Also there are certain Places your phone has to be for certain steps. I believe for boot loader you have to have adb debugging on and in either charge only mode or mount storage mode
Sent from my One S using xda app-developers app
I tried aio toolkit but without phone detected in it, no commands are working....
Sent from my RM-885_im_india_249 using Board Express
aneeshcphilip said:
I tried aio toolkit but without phone detected in it, no commands are working....
Sent from my RM-885_im_india_249 using Board Express
Click to expand...
Click to collapse
you tried hassoon2000 toolkit. And the toolkit won't recognize it?
Sent from my One S using xda app-developers app
Yes tried hasoon20000 toolkit..... Its not recognising my one s..,..
What might be the reason I cant install jb Ota.,...?
Sent from my RM-885_im_india_249 using Board Express
aneeshcphilip said:
Yes tried hasoon20000 toolkit..... Its not recognising my one s..,..
What might be the reason I cant install jb Ota.,...?
Sent from my RM-885_im_india_249 using Board Express
Click to expand...
Click to collapse
If your computer's software is having problems connecting to your phone you need to make sure your drivers are installed correctly, and make sure the USB cable you are using supports adb and fastboot commands (try a different cable). Some cables wont work with adb, it's always best to use the stock cable from HTC.
Also if your trying to do the ota. Phone must have the stock recovery
Manually get phone in bootloader connect the cable. Get in fastboot USB mode. Then flash manually or via toolkit.
Verstuurd van mijn HTC One S met Tapatalk
be6op said:
If your computer's software is having problems connecting to your phone you need to make sure your drivers are installed correctly, and make sure the USB cable you are using supports adb and fastboot commands (try a different cable). Some cables wont work with adb, it's always best to use the stock cable from HTC.
Click to expand...
Click to collapse
tried with 2 other computers... same problem when u r in bootloader screen and connect to pc via usb, then in taskbar it shows usb device not recognised... tried with stock cable and motorola usb cable also... same result...
i also have another issue from first day itself that it wont charge continually.... it will stop charging after a while and then i had to replug the cable to start charging again...
I think its the problem with the device... i m anyway going to claim for refund/replacement....
real187 said:
Also if your trying to do the ota. Phone must have the stock recovery
Manually get phone in bootloader connect the cable. Get in fastboot USB mode. Then flash manually or via toolkit.
Verstuurd van mijn HTC One S met Tapatalk
Click to expand...
Click to collapse
phone is in stock recovery... i cant even able to detect the phone in fastboot usb mode...
Install the HTC sync drivers, then it should recognize it.
Sent from my HTC One S using xda premium
why cant i update to jb ota?? i m getting this screen after the download and while in the installing process and reboots....pfa for the pic...
Ever wonder how to do it?
You might have done something wrong... You might have tweak something bad... You might have deleted some files... You might have done that all accidentally...
Have NO FEAR... You can now START A NEW BEGINNING...
Disclaimer:
I will not be responsible however if you brick your phone. :fingers-crossed:
Here's how:
First, you need to download a stock firmware Lenovo A369i_ROW_S108_130929.
That RAR file will contain 3 folders - namely: Lenovo A369i_ driver file, Lenovo A369i_Software Upgrate Tool and Target_bin. Extract all of them in a convenient directory to work on.
The first thing we need to work on is the drivers for the phone. We will install it first before everything else. To install it, REMOVE BATTERY of phone.
Open Device Manager.
Expand Ports (COM & LPT)
Plug in USB cable. And quickly look for a device which has a name of Preloader that will be installing, but Windows could not find its driver.
For just... like 3 seconds from the moment you plug in USB cable to the phone, it will be gone. So, you need to be fast. Before it will be gone, right click it and click Update Driver. Choose manually install driver and point it to the directory folder Lenovo A369i_ driver file. Now, you will have MediaTek Preloader USB VCOM Port.
Next is the Software Upgrade Tool. Open the folder Lenovo A369i_Software Upgrate Tool and run Flash_tool.exe
Click File -> Open Scatter-loading File... -> browse to the folder Target_bin and click the file MT6572_Android_scatter.txt
Check the box DA DL All With Check..
Unplug USB cable.
Plug it again and after 1.5 sec (you need to be fast), click Download.
If you did it right it will start downloading files into phone. This will let us avoid future errors like error in partition in SDCARD. Wait for the GREEN CIRCLE to pop out.
14. After that, uncheck the box DA DL All With Check.
Unplug USB cable, then plug it again, for 1.5 sec click Firmware -> Upgrade button.
Wait for it, it will take time. Even if it shows 0% it is still working its magic. You just need to wait for the GREEN CIRCLE to pop out.
After that, unplug USB cable.
Put battery on.
Turn on phone.
Wait for it, and BOOM!!!
I am making this guide in case in the future I accidentally destroyed my phone and I forgot to fix it.
Source: http://lenovo-forums.ru/topic/3322-%D0%BF%D1%80%D0%BE%D1%88%D0%B8%D0%B2%D0%BA%D0%B0-lenovo-a369i-row-s108-130929-%D0%BF%D0%BA/
Thank's man..Finally my lenovo alive again ..but,can you please check you'r files download link?because when i click the link,it is not in english language.luckly i found another forum can share the link at mediafire,and flash it using you'r method..anyway,u keep my mouth smile again..
Sent from my ZTE V793 using xda app-developers app
Mafi91 said:
Thank's man..Finally my lenovo alive again ..but,can you please check you'r files download link?because when i click the link,it is not in english language.luckly i found another forum can share the link at mediafire,and flash it using you'r method..anyway,u keep my mouth smile again..
Sent from my ZTE V793 using xda app-developers app
Click to expand...
Click to collapse
Welcome... Anyways, I cant find another link in English. However, you may share the one you find at mediafire. :laugh:
Stock Rom Lenovo A369i Link http://www.mediafire.com/download/3orsrdjui9gk5ok/Lenovo+A369i_ROW_S108_130929.rar
ahmedkom said:
Stock Rom Lenovo A369i Link http://www.mediafire.com/download/3orsrdjui9gk5ok/Lenovo+A369i_ROW_S108_130929.rar
Click to expand...
Click to collapse
Thank's man for sharing the download link.
Lenovo A369i ROW_S110_140108
New Firmware for Lenovo A369i ROW_S110_140108
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Update
http://lenovo369i.blogspot.co.at/2014/02/how-to-update.html
to download
http://lenovo369i.blogspot.co.at/2014/02/new-firmware-for-lenovo-a369i_6.html
i need modem.img file from this row rom. please someone upload the file. /system/etc/firmware/modem.img(might be different name)
Irwan Fauzi said:
i need modem.img file from this row rom. please someone upload the file. /system/etc/firmware/modem.img(might be different name)
Click to expand...
Click to collapse
Did u mean the latest update?why u need modem.img file?is it something wrong with you'r phone after updated?
Sent from my LenA369i XpZ1 Modified using xda app-developers app
Mafi91 said:
Did u mean the latest update?why u need modem.img file?is it something wrong with you'r phone after updated?
Sent from my LenA369i XpZ1 Modified using xda app-developers app
Click to expand...
Click to collapse
Im using Lenovo a369(non-i), i need modem.img file from this firmware because i thought i can enable wcdma-gsm 900 mhz band. i already have the file and i already copy the file to my phone, network is working fine but wcdma-gsm 900 mhz is still disable. i have read a post on China forum that wcdma-gsm 900 mhz band can be enable if i use modem.img from row firmware, unfortunately Lenovo a369 doesn't have row firmware.
Irwan Fauzi said:
Im using Lenovo a369(non-i), i need modem.img file from this firmware because i thought i can enable wcdma-gsm 900 mhz band. i already have the file and i already copy the file to my phone, network is working fine but wcdma-gsm 900 mhz is still disable. i have read a post on China forum that wcdma-gsm 900 mhz band can be enable if i use modem.img from row firmware, unfortunately Lenovo a369 doesn't have row firmware.
Click to expand...
Click to collapse
Did you flash it with you'r a369?I'm not sure because you'r phone just new released,but i don't think you that way will work for you because this two model has a diffrent firmware.
sent from my Lenovo A369i_MM95
Here's a download link to the May 22 update aka ROW_S111_140522:
Code:
https://drive.google.com/file/d/0B_KxHkaDeA14QWM0QkNUZzRuMHM/edit?usp=sharing
Lenovo claims to have done some performance enhancements to their software, besides slapping in a "Powered by Android" logo as per Google's recent licensing mandate. Same installation instructions as usual, and as in my case you may have to reflash your MAC/IMEI address to get rid of the NVRAM error.
Does this firmware and this tutorial work for Lenovo A369 to (non-i) ? Can i brick the phone or it's the same !!
How do you get the phone to download the update itself and go about updating process or are you stuck with flashing the updates?
ig33ku said:
How do you get the phone to download the update itself and go about updating process or are you stuck with flashing the updates?
Click to expand...
Click to collapse
This Update Not Available Download Via Software Upgrade.
I've Tried Flash This Rom 3 Times without any error ?
Please Be aware, In this ROM Do not Choose Download but Choose " Firmware Upgrade" in SpFlash tool
Need a some assistant .. :3
Is that really are the stock rom for a369i ?? I tried to flash the row s108 after having bootloop But failed .. Now the phone cant boot up & cant access recovery but It can still be detected by PC as "MTK VCOM PORT" .. Maybe It still fixable bcause it can still be detected .. I made a backup using my brother's a369i ( we were twins and bought a "twin phone" too ) using MTK DROID TOOL but I dont know how to restore .. And when I tried to flash it say something like "BROM 4032" or "8038" DRAM problem .. How can I fix this ?? Thanks for the help ..
pancit said:
Ever wonder how to do it?
You might have done something wrong... You might have tweak something bad... You might have deleted some files... You might have done that all accidentally...
Have NO FEAR... You can now START A NEW BEGINNING...
Disclaimer:
I will not be responsible however if you brick your phone. :fingers-crossed:
Here's how:
First, you need to download a stock firmware Lenovo A369i_ROW_S108_130929.
That RAR file will contain 3 folders - namely: Lenovo A369i_ driver file, Lenovo A369i_Software Upgrate Tool and Target_bin. Extract all of them in a convenient directory to work on.
The first thing we need to work on is the drivers for the phone. We will install it first before everything else. To install it, REMOVE BATTERY of phone.
Open Device Manager.
Expand Ports (COM & LPT)
Plug in USB cable. And quickly look for a device which has a name of Preloader that will be installing, but Windows could not find its driver.
For just... like 3 seconds from the moment you plug in USB cable to the phone, it will be gone. So, you need to be fast. Before it will be gone, right click it and click Update Driver. Choose manually install driver and point it to the directory folder Lenovo A369i_ driver file. Now, you will have MediaTek Preloader USB VCOM Port.
Next is the Software Upgrade Tool. Open the folder Lenovo A369i_Software Upgrate Tool and run Flash_tool.exe
Click File -> Open Scatter-loading File... -> browse to the folder Target_bin and click the file MT6572_Android_scatter.txt
Check the box DA DL All With Check..
Unplug USB cable.
Plug it again and after 1.5 sec (you need to be fast), click Download.
If you did it right it will start downloading files into phone. This will let us avoid future errors like error in partition in SDCARD. Wait for the GREEN CIRCLE to pop out.
14. After that, uncheck the box DA DL All With Check.
Unplug USB cable, then plug it again, for 1.5 sec click Firmware -> Upgrade button.
Wait for it, it will take time. Even if it shows 0% it is still working its magic. You just need to wait for the GREEN CIRCLE to pop out.
After that, unplug USB cable.
Put battery on.
Turn on phone.
Wait for it, and BOOM!!!
I am making this guide in case in the future I accidentally destroyed my phone and I forgot to fix it.
Source: http://lenovo-forums.ru/topic/3322-%D0%BF%D1%80%D0%BE%D1%88%D0%B8%D0%B2%D0%BA%D0%B0-lenovo-a369i-row-s108-130929-%D0%BF%D0%BA/
Click to expand...
Click to collapse
This really helped me,thanks a lot man
---------- Post added at 02:42 AM ---------- Previous post was at 02:24 AM ----------
Ezzam_Itachi said:
Is that really are the stock rom for a369i ?? I tried to flash the row s108 after having bootloop But failed .. Now the phone cant boot up & cant access recovery but It can still be detected by PC as "MTK VCOM PORT" .. Maybe It still fixable bcause it can still be detected .. I made a backup using my brother's a369i ( we were twins and bought a "twin phone" too ) using MTK DROID TOOL but I dont know how to restore .. And when I tried to flash it say something like "BROM 4032" or "8038" DRAM problem .. How can I fix this ?? Thanks for the help ..
Click to expand...
Click to collapse
Yes this is official firmware
but you can get latest version here
http://lenovo369i.blogspot.in/2014/02/how-to-update.html?m=1
I flashed s110 and it's working really well,
there also a more official firmware of version s111 available,but don't go for s111 because after installing this s111 upgrade you can't install many custom rom
http://lenovo369i.blogspot.in/2014/06/new-firmware-for-lenovo-a369i.html?m=1
so download s110 and flash it using so flash tool,and follow the installation method as pankit explained in this post
---------- Post added at 02:51 AM ---------- Previous post was at 02:42 AM ----------
GaziKs said:
Does this firmware and this tutorial work for Lenovo A369 to (non-i) ? Can i brick the phone or it's the same !!
Click to expand...
Click to collapse
You might brick your phone or might loose some features or functionality of your phone. Don't try this,bthis is for a369i only
GaziKs said:
Does this firmware and this tutorial work for Lenovo A369 to (non-i) ? Can i brick the phone or it's the same !!
Click to expand...
Click to collapse
The installation method is same, but not the firmware. There is one more person in this thread who flashed this firmware in his lenovo a369(non i) and having problem.
So please don't install this Rom on your phone........
Is there any preloader USB driver available for windows 8?
After I upgraded my desktop to windows 8, I am unable to install USB driver for lenovo a369i. So if anyone knows of a working driver file for this device on windows 8 please suggest me the link.....
A369i wont bbot after flashing this rom.. HELP...!!!
I previously had my new lenovo a369i[bought in september 2014] stuck at boot logo due to installing CF3D which wasn compatible with it. Thn i tried to flash TWRP recovery through SP Flash tool which wasn successful as it always showed "PMT error" which i guess was due to different version of preloader as i figured it out that i need a different scatter file but cudn find any unfortunately. I believe my rom had build version like 's201'. Now i have a question, Does the preloader differ with every build..? As i have seen people successfully flashing other stock firmware but when i flashed the rom given in this thread, it was successful but my phone now even wont turn on.. Someone please help me by providing the backup file of preloader and scatter which i can flash to this phone . Or maybe provide me with idea of what should i do. I read on some forums that flashing through SP Tools a backup of the same model phone can unbrick it. But unfortunately no one i know owns this phone here. It wud be a great help if some provides scatter and preloader or possibly even a stock rom which will fix it.
haridevil99 said:
I previously had my new lenovo a369i[bought in september 2014] stuck at boot logo due to installing CF3D which wasn compatible with it. Thn i tried to flash TWRP recovery through SP Flash tool which wasn successful as it always showed "PMT error" which i guess was due to different version of preloader as i figured it out that i need a different scatter file but cudn find any unfortunately. I believe my rom had build version like 's201'. Now i have a question, Does the preloader differ with every build..? As i have seen people successfully flashing other stock firmware but when i flashed the rom given in this thread, it was successful but my phone now even wont turn on.. Someone please help me by providing the backup file of preloader and scatter which i can flash to this phone . Or maybe provide me with idea of what should i do. I read on some forums that flashing through SP Tools a backup of the same model phone can unbrick it. But unfortunately no one i know owns this phone here. It wud be a great help if some provides scatter and preloader or possibly even a stock rom which will fix it.
Click to expand...
Click to collapse
Yeah s201 will not support many custom rom , this may cause bootloop go to this site and downgrade your system to s110 if you want to install custom rom http://lenovo369i.blogspot.in/2014/02/how-to-update.html?m=1
And if you want to stay with s201 then go to this
site
http://ngibadpunya.blogspot.in/2014/10/stockrom-lenovo-a369i-row-s201.html?m=1
---------- Post added at 01:46 PM ---------- Previous post was at 01:29 PM ----------
haridevil99 said:
I previously had my new lenovo a369i[bought in september 2014] stuck at boot logo due to installing CF3D which wasn compatible with it. Thn i tried to flash TWRP recovery through SP Flash tool which wasn successful as it always showed "PMT error" which i guess was due to different version of preloader as i figured it out that i need a different scatter file but cudn find any unfortunately. I believe my rom had build version like 's201'. Now i have a question, Does the preloader differ with every build..? As i have seen people successfully flashing other stock firmware but when i flashed the rom given in this thread, it was successful but my phone now even wont turn on.. Someone please help me by providing the backup file of preloader and scatter which i can flash to this phone . Or maybe provide me with idea of what should i do. I read on some forums that flashing through SP Tools a backup of the same model phone can unbrick it. But unfortunately no one i know owns this phone here. It wud be a great help if some provides scatter and preloader or possibly even a stock rom which will fix it.
Click to expand...
Click to collapse
I think you should stay with s201
Because I think s110 will also create problem for you
So go for s201
I mentioned the link
And if you have problem with language then translate it with Google translate app
Don't forget to press thank button if this helped
Hi! Got major problem. Recently I tried putting TWRP to my ICS 4.0.4 LG P920. I installed it (don't remember the TWRP version) but not quite correctly. If I try any ROM to install I always get in to statuts 7 error. If I try to run into reovery from ROM manager I get lying down Android with red triangle and a exclamation mark. I only managed to get in to recovery by POWER + VOLUME DOWN. But it still won't allowed me to install other ROM's such as Jellybean etc. Cache cleaning and Dalvik didn't helped. So I thought I will try this program http://theunlockr.com/2012/11/07/how-to-install-clockworkmod-recovery-on-the-lg-optimus-3d/ because it looked the easy way.
THE PROBLEM:
So I ran the program and chose to install LG Stock Recovery. It showed installation was successful. But now when I try to turn on the phone it goes in to restart loop (when on cord). Shows LG logo and restarts other and other and other. . . Can't even get into recovery. If plugged off and pressing power it shows logo and turn off.
Any advice would be VERY appreciated.
Tried this http://forum.xda-developers.com/showthread.php?t=2246001
Fastboot runs successfully but at the end my phone just vibrates but no LG logo shows up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone?
Try flashing 4.0.4 using the flashtool, then use OS-Hackings tool to install cwm recovery and wkparks bootloader if you want.
Sent from my LG-D620 using XDA Free mobile app
---------- Post added at 19:46 ---------- Previous post was at 19:36 ----------
Here is flashtool guide,
http://forum.xda-developers.com/showthread.php?t=1244490.
And here is OS-Hacking aio tool for recovery and bootloader, http://forum.xda-developers.com/showthread.php?t=2144738
Sent from my LG-D620 using XDA Free mobile app
Hi! I will try, but not sure if could do it with some missing images of instructions. Also, tried soldering 4 and 5 pins with 910 Kohm (it supposed to turn Lg phone in download mode), nothing happened.
Coolguy981 said:
Hi! I will try, but not sure if could do it with some missing images of instructions. Also, tried soldering 4 and 5 pins with 910 Kohm (it supposed to turn Lg phone in download mode), nothing happened.
Click to expand...
Click to collapse
If you are able to get into recovery, and get status 7 error, it usually means that the recovery is not compatible. If you want to install ics again just use the aio tool the last version is easy to use. And flash another recovery. Then flash rom.
Sent from my LG-D620 using XDA Free mobile app
shaqfu786 said:
If you are able to get into recovery, and get status 7 error, it usually means that the recovery is not compatible. If you want to install ics again just use the aio tool the last version is easy to use. And flash another recovery. Then flash rom.
Sent from my LG-D620 using XDA Free mobile app
Click to expand...
Click to collapse
Actually, I was able to get into recovery before using http://theunlockr.com/2012/11/07/how...lg-optimus-3d/ . Now I can't basically do anything: can't get into recovery, download mode or turn on.
https://vid.me/M21i
Ok, so I did everything in the instruction as http://forum.xda-developers.com/showthread.php?t=2268268 . Got the GREEN SOFTWARE DOWNLOAD mode, changed port to 41 etc. I managed to run SmartFlashTool_3D, cheched the port (41) Put the LGP920_110622.dll and LGP920_30A_AP.bin with LGP920_30A_CP.fls. An I've stucked with TimeOut error (my phone turn off durring this proccess even with full battery). Every single time I try. Any advice how to fix that?
Also tried different Flash tools. Tried B_SmartFlashTool_3D which showed the TimeOut error above in my post. Also tried LG Flash Tool. Problem is I never make it to the part it says Ready in the PORT1. Did everything on the instruction. Changed to port 41 when selected port 1 and it leaves me with :
When you get to that screen, press the arrow button, then it will show ready. Thereafter unplug usb and plug in again, it will then start flashing automatically.
Sent from my LG-D620 using XDA Free mobile app
Yes, I pressed the arrow, but it didn't change anything. Maybe I need different USB cable because I saw other people complaining about that. Also keep in mind that in the program there it says MODEL, it keeps blank space. Should it be so? In couple of Youtube videos I noticed that other people's smartphones were detected...
Coolguy981 said:
Yes, I pressed the arrow, but it didn't change anything. Maybe I need different USB cable because I saw other people complaining about that. Also keep in mind that in the program there it says MODEL, it keeps blank space. Should it be so? In couple of Youtube videos I noticed that other people's smartphones were detected...
Click to expand...
Click to collapse
After hiting the yellow arrow in lg flashtool you have to reconnect the phone.
Also you can try flashtool2014 https://mega.co.nz/#!Hlo22baS!zXV3VKRZzOI5EtO5MEAUzICC5kcx-a7xAGspZzhKMFs
You have to instal lgb2c before that https://mega.co.nz/#!70hBEQZK!IpOGBNLLu4sfRBzygJw2J8vh0B3OLgaVto26S21rsHs
If you facing failed to connect server error then you also have to edit the host file in C:\windows\system32\drivers\etc\hosts
And add this line 127.0.0.1 csmg.lgmobile.com
bitdomo said:
After hiting the yellow arrow in lg flashtool you have to reconnect the phone.
Also you can try flashtool2014 https://mega.co.nz/#!Hlo22baS!zXV3VKRZzOI5EtO5MEAUzICC5kcx-a7xAGspZzhKMFs
You have to instal lgb2c before that https://mega.co.nz/#!70hBEQZK!IpOGBNLLu4sfRBzygJw2J8vh0B3OLgaVto26S21rsHs
If you facing failed to connect server error then you also have to edit the host file in C:\windows\system32\drivers\etc\hosts
And add this line 127.0.0.1 csmg.lgmobile.com
Click to expand...
Click to collapse
Reconnected - didn't change.
Yeah, I will try other flash tools.
P.S. any advice on Time Out error? Why it is happening and how to stop it?
EDIT: somehow doesn't open links.
Coolguy981 said:
Also keep in mind that in the program there it says MODEL, it keeps blank space. Should it be so? In couple of Youtube videos I noticed that other people's smartphones were detected...
Click to expand...
Click to collapse
For example here https://www.youtube.com/watch?v=trhIgKL2FlI it instantly shows P920 after selecting AP file, while mine's not. Maybe I got wrong drivers installed...
Coolguy981 said:
Reconnected - didn't change.
Yeah, I will try other flash tools.
P.S. any advice on Time Out error? Why it is happening and how to stop it?
Click to expand...
Click to collapse
I have no idea why you get timeout error. I got these kind of errors with my Optimus 2x but after several tries I got passed. I falshed baseband and the rom separately.
Coolguy981 said:
For example here https://www.youtube.com/watch?v=trhIgKL2FlI it instantly shows P920 after selecting AP file, while mine's not. Maybe I got wrong drivers installed...
Click to expand...
Click to collapse
that is matter of dll. I dont remember well, but I used the dll from an extracted kdz to make lgflashtool work with my optimus 2x p990
@Coolguy981
Friend, have you tried flashing a KDZ? It is a much more reliable way to flash your phone, especially after you have already run into problems. The LG Mobile Support Tool has changed a lot since I last used it but I'm sure it still has an emergency recovery function where you type-in your IMEI and the Tool recovers your phone to it's original factory state. After that, you can use the AIO tool to install a custom recovery, then root, then whatever you want...
Don't forget that this phone is unbrickable and if you ever run into serious problems, Xbsall's resurrection guide will bring your phone back to life.
dreccon said:
@Coolguy981
Friend, have you tried flashing a KDZ? It is a much more reliable way to flash your phone, especially after you have already run into problems. The LG Mobile Support Tool has changed a lot since I last used it but I'm sure it still has an emergency recovery function where you type-in your IMEI and the Tool recovers your phone to it's original factory state. After that, you can use the AIO tool to install a custom recovery, then root, then whatever you want...
Don't forget that this phone is unbrickable and if you ever run into serious problems, Xbsall's resurrection guide will bring your phone back to life.
Click to expand...
Click to collapse
Tried this http://forum.xda-developers.com/showthread.php?t=2191698 didn't work. I put in S/W mode and ran UpTestEX put kdz file in it and pressed Normal web upgrade test and Upgrade Test. Nothing happens. So instead I chose Start Upgrade. The program shows line: " Extract kdz file" and do nothing for whole minute and my phone shutdown (it does that always if in S/W more than a minute and doing nothing). The program crashes and says Don't send error. Losing my faith in resurrecting this phone :crying:
Coolguy981 said:
Tried this http://forum.xda-developers.com/showthread.php?t=2191698 didn't work. I put in S/W mode and ran UpTestEX put kdz file in it and pressed Normal web upgrade test and Upgrade Test. Nothing happens. So instead I chose Start Upgrade. The program shows line: " Extract kdz file" and do nothing for whole minute and my phone shutdown (it does that always if in S/W more than a minute and doing nothing). The program crashes and says Don't send error. Losing my faith in resurrecting this phone :crying:
Click to expand...
Click to collapse
You must have already installed LG B2C app on your PC. This is the official LG Mobile Update Tool.
- Just run that.
- Connect your phone in S/W Download mode.
- Look for Emergency Phone Recovery (or something like that) in the B2C tool.
- Type-in your IMEI when it asks you.
- Let it do it's job.
dreccon said:
You must have already installed LG B2C app on your PC. This is the official LG Mobile Update Tool.
- Just run that.
- Connect your phone in S/W Download mode.
- Look for Emergency Phone Recovery (or something like that) in the B2C tool.
- Type-in your IMEI when it asks you.
- Let it do it's job.
Click to expand...
Click to collapse
Yes, I have installed LGMobile Support Tool. I have only found Upgrade Recovery. When I select it, insert my IMEI but it says my phone is up to date.