Database Info

[Q] What does "Warranty Bit: 1" mean at Download Mode?

Hi. If I wanted to return a phone, would it be a problem if it said "Warranty Bit: 1" at Download Mode.
It also says "Bootloader AP SWAEV: 1
Thanks

I want to return the phone and move to another provider not get it fixed under warranty.

Any help would be appreciated

Does anyone know?

drakemiller40 said:
Does anyone know?
Click to expand...
Click to collapse
I WOULD LIKE TO KNOW THE SAME THING????
I have been able to set back to "Samsung official status", and "custom binary = no" but say warrant bit 1 in red?
I already used triangle away and full-unroot option in SuperSU which I was told would return to stock status. I had previously just flashed the android 4.3 firmware and this did NOT reset custom binary download, which is why I re-rooted with saferoot so I could use triangle away, as stated above. Now I'm just concerned to take my phone in when it says "warranty bit 1" so any help would be much appreciated!
This is a Verizon SG3 SCH-I535 I am talking about.

[q] samsung galaxy s3 root accidentyl updated help

I have a rooted android device samsung galaxy s3 and it was running fine and everything till one day it said to install an update. i accepted it and while it was updating all of a sudden it went to that black screen and says, " system software not authorized by Verizon Wireless has been found on your phone. Please turn off you phone and go to the nearest Verizon Wireless store for help." Then thats where i couldn't do anyting with my phone but go to download/ODIN MODE and rebooting system thing where you can reboot system. IM very new and i don't know much about rooting and the meanings of a lot of words like unlock bootloader. If i go to ODIN MODE it says
ODINE MODE
PRODUCT NAME: SCH-1535
CUSTOM BINARY DOWNLOAD: Yes (1 Counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty bit: 1
BOOTLOADER RP SWREV:1
i think this doesn't look good. WHat should i do to make my phone be working again and not showing that black screen.
I already wiped all data and tried to do that StockROm thing on my computer ODIN and still nothing.
Is my bootloader locked? if so do i need to unlock it to make my phone work again? Thanks so much for your time

Same with mine I think it's called a bricked phone and think there is nothing we can do about it, hopefully someone has a solution

Might Work?
Remeax said:
I have a rooted android device samsung galaxy s3 and it was running fine and everything till one day it said to install an update. i accepted it and while it was updating all of a sudden it went to that black screen and says, " system software not authorized by Verizon Wireless has been found on your phone. Please turn off you phone and go to the nearest Verizon Wireless store for help." Then thats where i couldn't do anyting with my phone but go to download/ODIN MODE and rebooting system thing where you can reboot system. IM very new and i don't know much about rooting and the meanings of a lot of words like unlock bootloader. If i go to ODIN MODE it says
ODINE MODE
PRODUCT NAME: SCH-1535
CUSTOM BINARY DOWNLOAD: Yes (1 Counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty bit: 1
BOOTLOADER RP SWREV:1
i think this doesn't look good. WHat should i do to make my phone be working again and not showing that black screen.
I already wiped all data and tried to do that StockROm thing on my computer ODIN and still nothing.
Is my bootloader locked? if so do i need to unlock it to make my phone work again? Thanks so much for your time
Click to expand...
Click to collapse
I dunno if this will work for you. But I had the same message and when I booted in Download mode I just hit Cancel then rebooted and it worked?

If you flashed cyanogenmod, that means you're bootloader is unlocked, which is a good thing.
Can you get into CWM or TWRP? I don't have a samsung so i don't know about ODIN (i presume it's like flashtools for Xperia).
For as long as your phone vibrates (or does pretty much anything when you boot it up) your phone is not hardbricked, which is also good .
Try getting into CWM, shut down your phone completely, wait 5 seconds, then do: Volume Down + Home + Power key . This will get you into bootloader state and try reflashing your old backup, a stock rom or cyanogenmod.
First time with these softbricks is always the most fun ^^. Been there done that, i thought i spend 250 euro's on a phone that was broken .
Btw. Always make a backup for these kind of situations.

Remeax said:
I have a rooted android device samsung galaxy s3 and it was running fine and everything till one day it said to install an update. i accepted it and while it was updating all of a sudden it went to that black screen and says, " system software not authorized by Verizon Wireless has been found on your phone. Please turn off you phone and go to the nearest Verizon Wireless store for help."...
Click to expand...
Click to collapse
You took the 4.3 update. You must now Odin to stock 4.3 to unbrick, do not Odin to any other (previous) version. There is a safe root method.
I do not think there is custom recovery and bootloader is now permalocked.
http://forum.xda-developers.com/showthread.php?t=2270191 has a link to the odin file and the root method in post 2 or 3 i believe.

Ok how do i get it?
afextwin said:
You took the 4.3 update. You must now Odin to stock 4.3 to unbrick, do not Odin to any other (previous) version. There is a safe root method.
I do not think there is custom recovery and bootloader is now permalocked.
http://forum.xda-developers.com/showthread.php?t=2270191 has a link to the odin file and the root method in post 2 or 3 i believe.
Click to expand...
Click to collapse
Ok so is do i do the same thing as i was trying to flash or something like grab a kies file( the ones that take 2+ hours to download) and then flash or get to factory reset with the 4.3 file? if so do you know where i can grab a 4.3 update file to restore? please help me if you have skype or PM me? thanks

afextwin said:
You took the 4.3 update. You must now Odin to stock 4.3 to unbrick, do not Odin to any other (previous) version. There is a safe root method.
I do not think there is custom recovery and bootloader is now permalocked.
http://forum.xda-developers.com/showthread.php?t=2270191 has a link to the odin file and the root method in post 2 or 3 i believe.
Click to expand...
Click to collapse
I just recently ODIN flashed the latest 4.3 stock firmware for my TMO GS3 and then attempted to roll back to 4.1.2. It didn't brick my device, but it didn't work either. I would simply fail to install. I was able to reflash, through ODIN, the 4.3 stock firmware (actually used the root66 version). Then I was able to ODIN flash CWM recovery and install Dandroid 5.1, which is also a 4.3 based ROM. All is well now. I guess I simply can't go back to any previous 4.3 ROMs now, and I'm not sure about any AOSP ROMs. I may give a try at some point to see.

Not sure what happened....PLEASE HELP

Hey. So I have a note 2 on at&t. It was on 4.3. I used odin to downgrade to 4.1.1, then factory unlocked it and all was well. I tested with tmobile sim and it was on tmobile 4g and able to make calls using tmobile. I then went to update the version (I read once its unlocked it can be updated) Now, it gets stuck at "samsung galaxy note 2" when booting up and wont go past it. I tried to odin it again and successfully installed 4.1.1, but still wont get past samsung galaxy note 2. have disconnected phone and tried to boot up using vol+ (+) home button (+) power button, but nothing......PLEASE HELP
thanks

scottrf8 said:
Hey. So I have a note 2 on at&t. It was on 4.3. I used odin to downgrade to 4.1.1, then factory unlocked it and all was well. I tested with tmobile sim and it was on tmobile 4g and able to make calls using tmobile. I then went to update the version (I read once its unlocked it can be updated) Now, it gets stuck at "samsung galaxy note 2" when booting up and wont go past it. I tried to odin it again and successfully installed 4.1.1, but still wont get past samsung galaxy note 2. have disconnected phone and tried to boot up using vol+ (+) home button (+) power button, but nothing......PLEASE HELP
thanks
Click to expand...
Click to collapse
I don't have a Note (I have the GS3 on TMO). Do you have any idea if the Note 2 has the same issue that the GS3 has, where with the 4.3 update you get a new locked bootloader that prevents you from going back to anything earlier than 4.3? That's the way it is on the GS3. I guess if you were able to actually boot up and make calls after you downgraded back to 4.1.1, then that must not be the case.
In any case, you're getting stuck on the boot logo when you power it on? Can you get into the recovery at all? Do you have the stock recovery or a custom recovery installed? Have you tried clearing cache/dalvik and fixing perms? That often fixes things for me when I'm stuck on the boot logo.

scottrf8 said:
Hey. So I have a note 2 on at&t. It was on 4.3. I used odin to downgrade to 4.1.1, then factory unlocked it and all was well. I tested with tmobile sim and it was on tmobile 4g and able to make calls using tmobile. I then went to update the version (I read once its unlocked it can be updated) Now, it gets stuck at "samsung galaxy note 2" when booting up and wont go past it. I tried to odin it again and successfully installed 4.1.1, but still wont get past samsung galaxy note 2. have disconnected phone and tried to boot up using vol+ (+) home button (+) power button, but nothing......PLEASE HELP
thanks
Click to expand...
Click to collapse
I start to wonder if people research before doing anything.
To say again. You can't downgrade. You have Knox. You possibly tripped the Knox flag. Reflash the 4.3 stock ROM. If that fails, It's most probably eFuse, if It's 4.3.
(Basically, eFuse messes up your phone aka bricks You phone aka @#%& it up.)
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
---------- Post added 5th January 2014 at 12:05 AM ---------- Previous post was 4th January 2014 at 11:59 PM ----------
mcgrabowski said:
I don't have a Note (I have the GS3 on TMO). Do you have any idea if the Note 2 has the same issue that the GS3 has, where with the 4.3 update you get a new locked bootloader that prevents you from going back to anything earlier than 4.3? That's the way it is on the GS3. I guess if you were able to actually boot up and make calls after you downgraded back to 4.1.1, then that must not be the case.
In any case, you're getting stuck on the boot logo when you power it on? Can you get into the recovery at all? Do you have the stock recovery or a custom recovery installed? Have you tried clearing cache/dalvik and fixing perms? That often fixes things for me when I'm stuck on the boot logo.
Click to expand...
Click to collapse
You're right. The locked bootloader messed those who didn't research about it's life's real bad. 4.3 supposedly has eFuse in it, which FU*CKS your phone. I read it up on the Samsung Knox website, and it said that eFuse "rewrites a read-only part of the phone, resulting in a unusable phone." If u triggered that, it'll be a hard brick, (in my knowledge)
Knox itself is irritating. The Knox Warranty Void counter, which max at 1, is unresetable, (even with JTAG, will brick if h try) so your warranty is *poof*
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.

I did a fair amount of research before downgrading. In fact I didn't want to downgrade, but I did want to unlock it. It is unlocked and it's running on 4.1.1. So when you say that you can't downgrade, you mean you shouldn't downgrade cause then you will be stuck with 4.1.1?

scottrf8 said:
I did a fair amount of research before downgrading. In fact I didn't want to downgrade, but I did want to unlock it. It is unlocked and it's running on 4.1.1. So when you say that you can't downgrade, you mean you shouldn't downgrade cause then you will be stuck with 4.1.1?
Click to expand...
Click to collapse
When you were on 4.3, was that an OTA update or an ODIN flash of a stock firmware? Or did you just have a 4.3 ROM from the forums that you loaded (AOSP or rooted stock based ROM with Knox, etc., removed) with TWRP or CWM? Supposedly from what I've been reading if you take the 4.3 OTA or ODIN flash the stock 4.3, the bootloader gets updated, as Irwenzhao mentions above and I've experienced, where you CAN'T downgrade again to 4.1.2 or earlier. I believe that just means you can't go back to a fully stock pre 4.3. I THINK it just means you can't ODIN back to a factory image earlier than 4.3, which is what I experienced. But with TWRP or CWM, I believe I can still load other ROMs at will regardless if they are pre 4.3 or not.

yeah, that sounds kinda like the same thing I have come across. 4.3 was OTA and downgraded to a stock 4.1.1 ROM. Guess this triggers KNOX cause now KNOX WARRANTY VOID is 1. which once that is triggered, you cannot go from a non KNOX version (4.1.1) to a version that has KNOX. My question now is does that apply to just the stock firmware? Would ANY of the ROM's created by the devs work?
There were some posts in the unlock thread that people were able to go from 4.1.1 (after downgrading) back up to 4.3. Just trying to figure out how that would be the case? Could the knox warranty flag not have been set for them?

scottrf8 said:
yeah, that sounds kinda like the same thing I have come across. 4.3 was OTA and downgraded to a stock 4.1.1 ROM. Guess this triggers KNOX cause now KNOX WARRANTY VOID is 1. which once that is triggered, you cannot go from a non KNOX version (4.1.1) to a version that has KNOX. My question now is does that apply to just the stock firmware? Would ANY of the ROM's created by the devs work?
There were some posts in the unlock thread that people were able to go from 4.1.1 (after downgrading) back up to 4.3. Just trying to figure out how that would be the case? Could the knox warranty flag not have been set for them?
Click to expand...
Click to collapse
Just to make it clear, Knox is a bootloader, which means u can flash anything that's not a bootloader, but your warranty would be history. Flashing anything trips the flag, even 4.1.1/2 stock ROMs.
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.

Truthfully, that doesn't clear it up. Do the stock firmware through Kies or ota include a bootloader and that's why it won't install? Thanks

Flashing the stock firmware through kies, ODIN, or the OTA update will update the boot loader as far as I know and will ruin any chance of returning to stock and void your warranty. As long as you don't want to do that, I don't think it's too big of a deal.
At this point, I couldn't care less about the warranty. I would think it's expired now anyhow. As long as I can flash ROMs and boy the phone up and use it. I'm happy.
Sent from my SGH-T999 using xda app-developers app

After flashing stock firmware Samsung Health says I'm rooted when I'm not

I've checked on my download mode screen and Knox isn't tripped and my device status is official.
However, today, after installing official Samsung software, Samsung health claims it can't run on a rooted device, which mine isn't. I have tried reinstalling it and factory resetting. I've tried installing the PHE firmware which it supposedly came with, but to no avail. What can I do?
Also, what is a foolproof way to know which specific firmware my phone came with?
Thank you.

Question Return to Stock?

Good Morning Everyone
As the title suggests, i am looking to return my S22 Ultra back to stock.
i was on beyond rom for a bit, but too many apps complaining that my device was rooted has forced my hand to return my device back to stock once again.
I flashed the stock rom via odin, then locked my bootloader and wiped all data.
However i am still getting messages that my device is modifed.
Anyone got any ideas how to can truely return to full stock?
Thanks in advanced.
And yes i did do a search on the internet before asking, but i have been unable to find any advice outside of what i have already done.

happend to me, too. But only on the latest firmware. When I flash an older firmware, it won't appear. But after updating again to the latest ROM the message appears

Cheers mate. I'll give that a go.

Also note that if the device was rooted then you triggered the Knox flag and that one CANNOT BE RESET, it's an "efuse" (a hardware component that once changed it's state can only be reset by replacing it, i believe you need to replace the entire motherboard for that).
So, if the application checks the Knox status it will fail.
Here are a few apps that i know that will not work anymore :
- Knox itself (and any app that uses the Knox library/API )
- Samsung Pay
- Samsung Health
- Secure Folder
A few years ago I also had a banking app that failed to worked with a Knox flag triggered (on a Note 8), but after an update it allowed me to use the phone as long as i didn't have it rooted.