Related
This is my first post in XDA, and this is my first custom rom that i've installed (cm-12.1-20150502-UNOFFICIAL-p6200.zip).
I have noted the following main problems:
1) Alert: Unfortunately the process.com.android.phone has stopped
2) Not saving wi-fi password (know issue)
3) Video, the picture sometime freezes (know issue)
Question:
With previuos Andorid (KK), I've used to root the tab the "Framaroot-1.9.3.apk",
but now with the new ROM the APP fails,
how do I give root permissions?
1. Solved by Clear cache to Phone App
-->
Source: Digital Reborn
If you are seeing the error message “Unfortunately the process.com.android.phone has stopped” after you installed a new ROM or updated your firmware, there actually a couple of ways to fix it.
According to Digital Reborn, the error message is triggered by the phone or SIM toolkit application. So, if you are constantly getting the “Unfortunately the process.com.android.phone has stopped” error, here are ways to fix your device:
1. Clear Cache and Data of the Phone App
To access this option, go to Settings. Then, select Apps. Tap the All tab so that all the apps of your device will be displayed in a column. Scroll down until you see “Phone” or an option similar to it. Tap it, followed by selecting the “Clear Cache” option. If the problem persists, repeat the steps and include “Clear Data” in your actions. Reboot your phone for the changes to take effect.
2. Clear Cache and Data of the SIM Toolkit
Repeat the steps shown above. But this time, choose SIM toolkit from the list of apps under the All tab.
3. Fix Using Custom Recovery
Install the latest AROMA file manager, which can be found in the XDA website. Use it to delete the cache or temporary folder of “Phone” as well as the SIM toolkit app. Reboot your device for the changes to take effect.
4. Do a Factory Reset
As a last resort, backup your data and perform a Factory Reset. To do this, shut down your device normally. Next, hold down the Volume Up, Home and Power keys altogether until the phone vibrates. Once it vibrates, let go of the Power key but keep your fingers pressed on the rest. However, once you see the Android logo, let go. From there, backup and do a Factory Reset.
---->
The Root permission works after install UPDATE-SuperSU-v2.46.zip file from SuperSu(@chainfire) in recovery mode.
Someone know if this Rom support the multiuser functionaliy?
I know that this feature exists, I wrote to you about it, because I tried it but it does not work for me.
When i press my icon account, it it doesnt work it says "the contact doesnt exist"
Thanks in advance
To enable Multi User, I found these:
Just go to /system , edit your "build.prop" file and add the following lines:
# Multi Users
fw.max_users=3
fw.show_multiuserui=1
I'll Try...
Multi-User works with workaround...
i update my galaxy tab 7.0 plus (p6200) to this firmware and install latest gapps for Lollipop 5.1.x.
But the work of my device is extremely unstable.
Example:
i will launch gmail (with branches installed addon) when i try attaching files to email - Reboot.
Installed gdrive - attach files to send, reboot.
Even at times when viewing video from youtube, the same restart! During installation I've done everything wipe (dalvik/cache/system) and date format
You can help me, that I did wrong?
the latest firmware is fantastic. only fault is not working with the Vodafone sim.... no sim detected
Inviato dal mio GT-I9505 utilizzando Tapatalk
Quote:
Originally Posted by daniel_hk
---
Solution:
Use a root broswer (eg. ES file explorer, set the /system to r/w) to edit the file /system/build.prop
delete the line: ro.telephony.ril_class=SamsungExynos4RIL
Reboot
--
It works !!!
Thanks Daniel
Inviato dal mio GT-P6200 utilizzando Tapatalk
Device - OnePlus One
Problem 1 ->
Ive tried to flash latest cm13 and gapps zip file
ROM - cm-13.0-20151127-NIGHTLY-bacon.zip
Gapps - open_gapps-arm-6.0-pico-20151127.zip
I did the following:
1. Copied ROM and gapps to device
2. Installed twrp v2.8.7.0
3. Rebooted to recovery
4. Wiped system,cache,dalvik cache
5. Install -> ROM and gapps
6. Wipe cache/dalvik
7. Reboot device.
When the phone starts, i get "Android is upgrading - optimizing apps.." , and once the optimizing part completes then immediately im getting error - "Unfortunately, Google App has stopped"
If i select "ok", it pops up again.
Im unable to use my device since the error message doesnt go away.
Problem 2 -
I got tired of trying to get cm 13 and decided to revert to cm 12.1
I followed all the above mentioned steps for flashing using cm 12.1 ROM
Now the ROM and gapps are flashed but when the phone starts, it goes through the process - "Android is upgrading - optimizing apps..", once that completes the screen goes blank.
On restarting the device, again i get "Android is upgrading - optimizing apps..", and once again the screen goes blank.
Problem 3 -
This ones not that bad actually.... I followed the above steps and just flashed cm13 ROM and didnt install gapps.
Now the device boots up.
Ive downloaded and installed Play store apk.
Then i installed the latest google play services apk
Now im getting the error "Unfortunately, Google play services has stopped"
How do i proceed now??
I have no idea what to do now.
Plz Plz help.
Thanks in advance
I am going through the exact same problem on the exact same device with the exact same versions of update file and gapps zip file.
After almost trying to search any possible solution to it on google and xda, I gave up and tried to solve it myself by looking into the phone itself. There wasnt much I was able to do because of the Crash Loop saying "Unfortunately, Setup Wizard has stopped". So to rest the situation for now, I somehow went into Setting > Apps > Show System > Setup Wizard with setting logo and not the Cynogen Logo one! And Force stopped it.
Also, I cant open my home on the phone either. I press the home button and the Setup Wizard starts to crash again!
Its painful to see your beloved phone struggle to work like that! I sometimes hate CynogenMod for their nightlies and wish I could go back to the stable versions of Oxygen or CM 12!
ok so how many gapps packages have you guys downloaded and tried? Ar you tryig each time with the same gapps and rom that is giving you issues
1. Did you make Nandroid Backup of your stabe phone ?
If yes. Flash that and you'll get working phone again.
2. Gapps package you guys are installing are meant for Lollipop or Marshmellow ?
sent from Bacon (OnePlus One)
Tried More than 5 Different Gapps
playya said:
ok so how many gapps packages have you guys downloaded and tried? Ar you tryig each time with the same gapps and rom that is giving you issues
Click to expand...
Click to collapse
Initially, I thought its just an update. So there wont be any need to install Gapps back again. But then The Play store kept crashing. So I rebooted my phone after cleaning Google Play Services and Play Store.
That didn't help. Then Found somewhere written that the issue might be caused by corrupt Gapps or incompatible Gapps, So tried installing The Gapps downloaded from OpenGapps. There I downloaded all the versions of it from , Stock to nano and pico. None of them helped. The Phone is still crashing saying The Setup Wizard has stopped. Can't open Home Screen Either. Can't open Keyboard either.
Abhinav_Rakesh said:
1. Did you make Nandroid Backup of your stabe phone ?
If yes. Flash that and you'll get working phone again.
2. Gapps package you guys are installing are meant for Lollipop or Marshmellow ?
sent from Bacon (OnePlus One)
Click to expand...
Click to collapse
Thanks for the reply Abhinav
Unfortunately i havent taken backup of my stable phone
The gapps package i tried to install is the latest version for marshmellow when i flashed cm13
I've mentioned the filenames of the ROM and gapps in my previous post
Thanks again
abhishek.karvi said:
Thanks for the reply Abhinav
Unfortunately i havent taken backup of my stable phone
The gapps package i tried to install is the latest version for marshmellow when i flashed cm13
I've mentioned the filenames of the ROM and gapps in my previous post
Thanks again
Click to expand...
Click to collapse
Have you tried CM12.1 again ? May be resurrection remix rom ?
Try flashing the CM12.1 rom again .. If you are able to access recovery then use can also use USB-OTG ..
Download ROM, Firmware and Opengapps of Lollipop and try ..
sent from Bacon (OnePlus One)
Was getting the same error
Wiped the whole phone off including data reinstalled cm 13 (latest nightly i.e 28112015) and added the opengapps nano package to the flashing zip que in twrp solved the problem
Abhinav_Rakesh said:
Have you tried CM12.1 again ? May be resurrection remix rom ?
Try flashing the CM12.1 rom again .. If you are able to access recovery then use can also use USB-OTG ..
Download ROM, Firmware and Opengapps of Lollipop and try ..
sent from Bacon (OnePlus One)
Click to expand...
Click to collapse
I've installed cm12.1 and gapps 5.1 nano.
Now the device is working properly...earlier when i was trying to flash cm12.1 (as ive described in Problrm 2) , probably i was using a wrong version of gapps/ROM (im unsure which one)
Thanks for your suggestion Abhinav.
Im going to stick with cm12.1 for a while now till cm13 is tested a bit more. Im sure that if we get a solution for cm 13 issue, many users would be benefited.
Once again, thank you for your support, ur doing a fabulous job XDA.
abhishek.karvi said:
I've installed cm12.1 and gapps 5.1 nano.
Now the device is working properly...earlier when i was trying to flash cm12.1 (as ive described in Problrm 2) , probably i was using a wrong version of gapps/ROM (im unsure which one)
Thanks for your suggestion Abhinav.
Im going to stick with cm12.1 for a while now till cm13 is tested a bit more. Im sure that if we get a solution for cm 13 issue, many users would be benefited.
Once again, thank you for your support, ur doing a fabulous job XDA.
Click to expand...
Click to collapse
Found a solution!
Looks like the Gapps from Opengapps werent compatible with the 6.0 Marshmallow yet.
I spent a day looking for different gapps and tried them all on my phone.
The only gapps file which worked with CM13.120151128 update for the oneplus one was this one -->
But before installing this, In TWRP you need to Go to Wipe>Advanced Wipe And select > System, Data, Dalvik and Cache to wipe everything from your phone. Then Fresh install CM13.120151128 and Slim Zero gapps you downloaded from the above link!
All Of this, only if you want to really run your phone with Android 6.0 Marshmallow!
abhishek.karvi said:
Device - OnePlus One
Problem 1 ->
Ive tried to flash latest cm13 and gapps zip file
ROM - cm-13.0-20151127-NIGHTLY-bacon.zip
Gapps - open_gapps-arm-6.0-pico-20151127.zip
I did the following:
1. Copied ROM and gapps to device
2. Installed twrp v2.8.7.0
3. Rebooted to recovery
4. Wiped system,cache,dalvik cache
5. Install -> ROM and gapps
6. Wipe cache/dalvik
7. Reboot device.
When the phone starts, i get "Android is upgrading - optimizing apps.." , and once the optimizing part completes then immediately im getting error - "Unfortunately, Google App has stopped"
If i select "ok", it pops up again.
Im unable to use my device since the error message doesnt go away.
Problem 2 -
I got tired of trying to get cm 13 and decided to revert to cm 12.1
I followed all the above mentioned steps for flashing using cm 12.1 ROM
Now the ROM and gapps are flashed but when the phone starts, it goes through the process - "Android is upgrading - optimizing apps..", once that completes the screen goes blank.
On restarting the device, again i get "Android is upgrading - optimizing apps..", and once again the screen goes blank.
Problem 3 -
This ones not that bad actually.... I followed the above steps and just flashed cm13 ROM and didnt install gapps.
Now the device boots up.
Ive downloaded and installed Play store apk.
Then i installed the latest google play services apk
Now im getting the error "Unfortunately, Google play services has stopped"
How do i proceed now??
I have no idea what to do now.
Plz Plz help.
Thanks in advance
Click to expand...
Click to collapse
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
Thanks for this, it did the trick for me
Now running CM13.0-20151201 NIGHTLY Bacon.
The error "Setup Wizard Stopped" of in het nederlands "Installatiewizard gestopt" has not shown up again after changing permissions for "Setup Wizard" (one without cm logo)
what if i cant turn it on after the actualisation? i install the patch, the applications optymalize, then the screen turns black, i have an android icon again, phone seems to be loading, and then it just resets again and continually does that.i recently wipped off my previous patches so i have just this one =/ i can't or dont know how to copy the previous patch to my phone via PC because when its of or in the recovery i am unable to get into it's data, pc doesnt see it.
MrSeler said:
what if i cant turn it on after the actualisation? i install the patch, the applications optymalize, then the screen turns black, i have an android icon again, phone seems to be loading, and then it just resets again and continually does that.i recently wipped off my previous patches so i have just this one =/ i can't or dont know how to copy the previous patch to my phone via PC because when its of or in the recovery i am unable to get into it's data, pc doesnt see it.
Click to expand...
Click to collapse
From what i had seen, this case occurs when you didn't do a proper flash along with gapps. Make sure you flash the desired rom and with it the correct gapps package at a single stretch. Then Wipe Dalvik Cache and Reboot.
So just do a dirty flash and gapps.
I am not sure why you are not able to access your phone when TWRP is on. For me I had that option, copied the new zip files when in TWRP screen and started flashing from there.
maxpayne1989 said:
From what i had seen, this case occurs when you didn't do a proper flash along with gapps. Make sure you flash the desired rom and with it the correct gapps package at a single stretch. Then Wipe Dalvik Cache and Reboot.
So just do a dirty flash and gapps.
I am not sure why you are not able to access your phone when TWRP is on. For me I had that option, copied the new zip files when in TWRP screen and started flashing from there.
Click to expand...
Click to collapse
yeah i m going to try this a few times more and write what were the results. all i have to do is simply copy the gapps into my phone, the pc sees it but im not able to access it in any way and cant figure out how.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
I followed u r steps on tugapower rom but can't solved this problem
Plz help any one
pankspoo said:
I followed u r steps on tugapower rom but can't solved this problem
Plz help any one
Click to expand...
Click to collapse
You could try what is described here ... or test with the following:
Disable the Setup Wizard form your PC with
Code:
adb shell pm disable com.google.android.setupwizard
It should display: Package com.google.android.setupwizard new state: disabled
Then you can follow the first steps of @maxpayne1989 's description. Of course you won't see the setup wizard because it is disabled. After enabling it again with
Code:
adb shell pm enable com.google.android.setupwizard
(should display Package com.google.android.setupwizard new state: enabled)
you can select it and try setting the permissions.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
You're a life saver. Thanks for the tip! It works for me.
Yes I have the same setup and the same problem.
Interesting appraoch ... . My problem: I do not have "Setup Wizard" in the Apps List within settings ... and my phone stay unuseable
-------------------------
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
I tried this approach to get rid of the "Setup Wizard has stopped" pop-up error, but got an error message when I tried to execute the command ...
>adb shell pm disable com.google.android.setupwizard
CANNOT LINK EXECUTABLE: cannot locate symbol "android_set_rt_ioprio" referenced by "/system/lib/libinputflinger.so".
page record for 0xb6f0f04c was not found (block_size=32)
tungdil said:
You could try what is described here ... or test with the following:
Disable the Setup Wizard form your PC with
Code:
adb shell pm disable com.google.android.setupwizard
It should display: Package com.google.android.setupwizard new state: disabled
Then you can follow the first steps of @maxpayne1989 's description. Of course you won't see the setup wizard because it is disabled. After enabling it again with
Code:
adb shell pm enable com.google.android.setupwizard
(should display Package com.google.android.setupwizard new state: enabled)
you can select it and try setting the permissions.
Click to expand...
Click to collapse
Has anyone had success in getting google play store / gapps running on the Chinese SM-G 9200 with Android 6.0.1?
Flashing gapps in TWRP fails due to insufficient available storage, all kind of installations i tried (rooted / unrooted) are just leading to crashing google services framework. I set the maximum permissions including change of system settings in the app config. No success.
Anyone had success? Or can extract the google packages from another S6 to test if i can install?
I had success but the path is everything else than straightforward and i would call it a dirty hack and i do not give any guarantee that this will work and not brick your phone.
1. Flash firmware CHC-G9200ZCU2DPL1-20170105164838 with Odin
2. Install TWRP (i used 3.0.0.0). This will result in boot-loop
3. Re-Flash the firmware above
4. Boot up the phone, should work now
5. Restart into TWRP, install SuperSU (i used 2.46)
6. Boot up the phone
7. Use Root Explorer to free up some system space to install gapps. (I deleted the Chinese apps in /system/preload which should give sufficient space but deleting might have side effects)
8. Download pico arm64 Android 6 gapps from opengapps
9. Boot into TWRP, install gapps
10. Boot up the phone. Play store should be there, you can open but i was not able to login
11. I downloaded the Google Installer_2.0.apk typically used for Xiaomi phones and run the app. It will update ServicesFramework, Install Loginmanager and fail with Playstoreservices, but this is fine. Probably it is just sufficient to install the Loginmanager, did not try that.
12. Re-boot the phone. Now It should work fine
Hi
I cooked ROM for my Ulefone Paris ( in some countries known as Tesla 6.1 ) and I want to share.
Install instructions: (I install this way)
Flash stock image - 3025 Paris-20161019-ULEFONE-AH2__MM_S511_E11
Allow it to boot.
On Welcome screen do Power off.
Start SP Flash (SP_Flash_Tool_v5.1712.00.000_Windows) and install TWRP (3.1.1.0) - (I need to flash TWRP 2 times to get TWRP.)
Enter TWRP (Power + VolumeUP, with VolumeUP choose "Recovery" and press VolumeDOWN to enter TWRP)
Wipe - Dalvik, System, Cache, Data and optionally Internal Storage
Connect Your phone, copy RR-N-v5.8.5-20180326-Ulefone-Paris-Tesla6.1-Unofficial.zip image + magisk.zip to Phone.
Disconnect Phone.
Install RR-N-v5.8.5-20180326-Ulefone-Paris-Tesla6.1-Unofficial.zip image.
Install magisk.zip
Reboot to System
Wait 10 minutes
Enjoy
Download:
RR-N-v5.8.5-20180326-Ulefone-Paris-Tesla6.1-Unofficial.zip
magisk.zip
Stock image - 3025 Paris-20161019-ULEFONE-AH2__MM_S511_E11
SP_Flash_Tool_v5.1712.00.000_Windows
TWRP 3.1.1.0 for PARIS.rar
THIS IMAGE IS PORTED FROM:
[ROM][Unofficial] RESURRECTION REMIX N v5.8.5 FOR INFINIX NOTE 3 PRO - X601 [MT6753]
All credits go to original owner/builders of image.
Credits
Nasre Irma (Owner), Lenovoved, Coulibaly Nonta, Ahmed Rahmy, Izaq Kull, Syed Ahmed Ali Shah, John Gothi and AndroidHQ254
BIG THANX @cuvetto FOR INSPIRE ME TO TRY. (and, TWRP - thanx)
I have installed on Tesla Smartphone 6.1, and it is working fine. I need to test it for a couple of days. So far everything except gps is working fine. Indoor GPS is not working.I have issue with google play services. Looks much better than MM. I have followed install steps, except, it have been installed on latest Tesla Stock ROM .
Google play Services uncertified device error is common!?
milan1984 said:
I have installed on Tesla Smartphone 6.1, and it is working fine. I need to test it for a couple of days. So far everything except gps is working fine. Indoor GPS is not working.I have issue with google play services. Looks much better than MM. I have followed install steps, except, it have been installed on latest Tesla Stock ROM .
Google play Services uncertified device error is common!?
Click to expand...
Click to collapse
I got same problems... soon as I get time i will try to fix that...
Thanx for Your reply.
Google certificate explained by LineageOS
Google Play Certification
Guide to register your phone with custom rom on google by @AndroidHQ254
HOW TO FIX “Device not verified by Google” PLAY STORE STATUS ON CUSTOM ROMS
Hope this help.
According to YGPS app GPS work...
milan1984 said:
... Google play Services uncertified device error is common!?
Click to expand...
Click to collapse
It's solved!
1. From Magisk install "MagiskHide Props Config" module and reboot device,
2. From Google Play Store install "Terminal Emulator",
3. Run Terminal Emulator and type:
Code:
su
tap "Enter", and now type:
Code:
props
then tap "enter",
4. Select - 1. Edit device fingerprint, tap "enter"
5. Select - 4. Huawei, tap "enter",
6. Select - 4. P9, tap "enter"
...go to the Magisk and check SafetyNet
Voila! It's OK ...now, Viber is working, device can be charged if is ON too, and "Google play Services uncertified device error" notifications now goes to the... PM
Soon will post fixed V2 ROM... If u find more errors, please post here...
Fix didn't worked for me. Safety net still not working. Viber is FC
milan1984 said:
Fix didn't worked for me. Safety net still not working. Viber is FC
Click to expand...
Click to collapse
I'm still fighting getting advanced sound features on (viber use it, so FC of viber is sound problem)
Soon as I get sound fixed will post new image.
After a few day of usage this rom has been stable to daily work accept usage of Viber app, and lately FB app has started FC's. GPS in first attempt needed longer to get a lock, but now its working perfectly. Battery drainage is normal for this phone. Butt since the Viber and Facebook app is FC I'm going back to stock.
I'm very Happy that someone still work in this smartphone...I was working all time alone.... ?
What do you think about thanks to me in your credits, considering that you use my works?
Thanks!
Inviato dal mio Redmi 4 utilizzando Tapatalk
cuvetto said:
I'm very Happy that someone still work in this smartphone...I was working all time alone.... ?
What do you think about thanks to me in your credits, considering that you use my works?
Thanks!
Inviato dal mio Redmi 4 utilizzando Tapatalk
Click to expand...
Click to collapse
Hmmm...
I really did not use any file from EPIC ROM. (or any other you create)
But I thank you for your big work on EPIC ROM (and others - I did not download them)
g0didit said:
Hmmm...
I really did not use any file from EPIC ROM. (or any other you create)
But I thank you for your big work on EPIC ROM (and others - I did not download them)
Click to expand...
Click to collapse
I meant TWRP ... I was convinced you used my version. Anyway, no problem! ?
Inviato dal mio Redmi 4 utilizzando Tapatalk
cuvetto said:
I meant TWRP ... I was convinced you used my version. Anyway, no problem! ?
Inviato dal mio Redmi 4 utilizzando Tapatalk
Click to expand...
Click to collapse
OMG, TWRP - Ur RIGHT - sorry, that comes to me as "Public good"
Thanks. Just installed and Camera is showing 5.3mp. Can you update to use the full 13mp?
MikeN68 said:
Thanks. Just installed and Camera is showing 5.3mp. Can you update to use the full 13mp?
Click to expand...
Click to collapse
So far I manage to make it 8mpx... nothing else. (13mpx but if u take pictures with flash camera FC, and video recording not work)
g0didit said:
So far I manage to make it 8mpx... nothing else. (13mpx but if u take pictures with flash camera FC, and video recording not work)
Click to expand...
Click to collapse
Can you tell us how to do it too, i don't mind the video recording problem
Zadder09 said:
Can you tell us how to do it too, i don't mind the video recording problem
Click to expand...
Click to collapse
Try this: https://forum.xda-developers.com/showpost.php?p=77263996&postcount=8
MAKE BACKUP FIRST.
(I dont own this phone anymore so, this is it)
g0didit said:
Try this: https://forum.xda-developers.com/showpost.php?p=77263996&postcount=8
MAKE BACKUP FIRST.
(I dont own this phone anymore so, this is it)
Click to expand...
Click to collapse
I tried the camfix on this rom, but it results in a bootloop, but when it worked in your LineageOS ROM. but it's just not doing it in this one.
Can anybody help me with this problem? I have broken screen on my phone and purchase the new one, and when i change the new lcd the screen is not show any pictures, it was just light (blue), so i contact seller and he say that for this new screen i got to flash the newest original firmware from ulefone paris (S511_E11_GQ3025AH2_PARIS_MM_20161019) and he give me link where to download and it realy works. I dont know how but now with new firmware android 6.0 lcd screen full working. But now i have the problem, because i cant install any custom rom anymore (because the screen will not work) i cant get ROOT anymore... I try mant things like flash only recowery TWRP all version, i try with kingoroot.....etc nothing working i also try to install via adb but not lucky..... Can anybody help me how to get root?
Good morning to all,
I think I posted this thread in the wrong place and I'm sorry for this, so I post it here now.
I flashed my SM-P905 with Lineage 15.1 using TWRP 2.8.7.0.
I have installed the correct OS (viennaltexx) and the correct gapps (arm 8.1 super) but I was having an issue with Google Play Services that was continuously stopping and this didn't allow me to set the google account and to get access to all the play services, so I decided to retry to flash the OS and gapps, I wiped everything but the sd card, but now when I try to flash the OS it stops on "no md5 file found" (no error 7) and it goes back to the TWRP home.
Now I've installed the 14.1 Lineage OS (again wiping everything but the sd card) and it is very stable and fast and gives only 1 problem:
- the fact that I can't install the SuperSU and it causes the CM S Pen app fail to work, because lacking of root access. When I flash the file (file name "addonsu-14.1-arm-signed") everything goes well, but when I reboot the system the SuperSU app is missing. I activated the access for APP and ADB in the developer options but it still doesn't work;
This system would be completely satisfying with S Pen functions.
But I would try to install Oreo just beacause I would like to try the porting created by Alexis, with the Note 9 apps.
Can someone please help me? Thank you very much!
EnricoLeoni said:
Good morning to all,
I think I posted this thread in the wrong place and I'm sorry for this, so I post it here now.
I flashed my SM-P905 with Lineage 15.1 using TWRP 2.8.7.0.
I have installed the correct OS (viennaltexx) and the correct gapps (arm 8.1 super) but I was having an issue with Google Play Services that was continuously stopping and this didn't allow me to set the google account and to get access to all the play services, so I decided to retry to flash the OS and gapps, I wiped everything but the sd card, but now when I try to flash the OS it stops on "no md5 file found" (no error 7) and it goes back to the TWRP home.
Now I've installed the 14.1 Lineage OS (again wiping everything but the sd card) and it is very stable and fast and gives only 1 problem:
- the fact that I can't install the SuperSU and it causes the CM S Pen app fail to work, because lacking of root access. When I flash the file (file name "addonsu-14.1-arm-signed") everything goes well, but when I reboot the system the SuperSU app is missing. I activated the access for APP and ADB in the developer options but it still doesn't work;
This system would be completely satisfying with S Pen functions.
But I would try to install Oreo just beacause I would like to try the porting created by Alexis, with the Note 9 apps.
Can someone please help me? Thank you very much!
Click to expand...
Click to collapse
Try upgrading your TWRP to a newer version (3.1.1 seems to be popular version) and flash everything again. 2.8.7 is a very old version for TWRP, and might not handle the 15.1 stuff well.
rhricik447 said:
Try upgrading your TWRP to a newer version (3.1.1 seems to be popular version) and flash everything again. 2.8.7 is a very old version for TWRP, and might not handle the 15.1 stuff well.
Click to expand...
Click to collapse
Hi rhricik, thank you very much for your response.
I tryed to find the .tar file to install it with Odin, but I failed, I only find the IMG files. Do you know how to install the newer version using the IMG file and the TWRP app in Android (if it is possible ti do) or do you have a link to a .tar file?
I tryed to flash the image with the recovery, but when I go to the download folder i tap on "images" but I can't see the file. I can see it in the archive, but not in recovery mode.
Thank you again!
rhricik447 said:
Try upgrading your TWRP to a newer version (3.1.1 seems to be popular version) and flash everything again. 2.8.7 is a very old version for TWRP, and might not handle the 15.1 stuff well.
Click to expand...
Click to collapse
I found only the TWRP 3.0.2 as the latest version for Galaxy Note Pro 12.2. I converted the img file to .tar and it worked, but when I go to instal the OS it still stops on md5 file not found.
Is it safe to use a TWRP 3.2.2 for another device?
Otherwise I could try to flaash the system using Odin. Is it possible?
Please try this Link: https://forum.xda-developers.com/galaxy-note-pro-12/development/recovery-twrp-3-1-1-0-t3684802
"2. 20180708: 3.2.2-0 version"
Regards
bemanet said:
Please try this Link: https://forum.xda-developers.com/galaxy-note-pro-12/development/recovery-twrp-3-1-1-0-t3684802
"2. 20180708: 3.2.2-0 version"
Regards
Click to expand...
Click to collapse
Hi bemanet, thank you very much! The 3.2.2 version of TWRP is successfully installed.
At least now I know what the problem is.
When I flash the system I obtain this response now:
" Skipping Digest Check: no Digest file found
Zip file is corrupt!
Error installing zip file '/external_sd/oreo/lineage-15.1-20180708-UNOFFICIAL-viennalte.zip'
Updating partition details...
... done "
So maybe there must be some problem with the file structure.
Anyway thank you very much for your help.
Regards
You may need to re-download the file. It may be corrupt....
bemanet said:
You may need to re-download the file. It may be corrupt....
Click to expand...
Click to collapse
Yes i tried but the file results unavailable, maybe for fixing. I'll try again later!
Thank you very much!
Meanwhile, do you know why I find impossible on Lineage 14.1 to install a different keyboard? I tried to install the Samsung keyboard and another different keyboard with CTRL and arrows keys (both installations went good) but both times when I went to select the keyboard It gave me only the gboard.
Plus, when I try to open the gboard settings the app crashes, so I would like to change it.
Thank you again!
EnricoLeoni said:
Yes i tried but the file results unavailable, maybe for fixing. I'll try again later!
Thank you very much!
Meanwhile, do you know why I find impossible on Lineage 14.1 to install a different keyboard? I tried to install the Samsung keyboard and another different keyboard with CTRL and arrows keys (both installations went good) but both times when I went to select the keyboard It gave me only the gboard.
Plus, when I try to open the gboard settings the app crashes, so I would like to change it.
Thank you again!
Click to expand...
Click to collapse
Try Hacker's Keyboard from the Play Store - has all the control and arrow keys. That's been my main keyboard across 5 devices. Works well.
---------- Post added at 21:40 ---------- Previous post was at 21:37 ----------
Follow the directions that Hacker's Keyboard gives to get it set up as your default keyboard
rhricik447 said:
Try Hacker's Keyboard from the Play Store - has all the control and arrow keys. That's been my main keyboard across 5 devices. Works well.
---------- Post added at 21:40 ---------- Previous post was at 21:37 ----------
Follow the directions that Hacker's Keyboard gives to get it set up as your default keyboard
Click to expand...
Click to collapse
Wow thank you very much rhricik, it is perfect!