Database Info

RazoDroid v1.0

Hi, I am a complete newbie....I managed to install the rom without any trouble...but i am still not able to find out how to flash the kernel,apply the patch,add 14 toggles etc...Any help will be appreciated...

refer to this thread.
http://forum.xda-developers.com/showthread.php?t=1430889

To flash those updates. U must have them on your sd card. Then u boot in cwm recovery. There mount /system and just install zip from sd card. Dont put 14 toggles . Many peoples just lose notification bar with it. Only troubles.
Sent from my GT-S5670 using Tapatalk

I read it....Only the download links are given....Instructions are not given on how to flash kernels are add patches....

Thanks for the quick reply....but could you give more clearer instructions...sorry but i am very new at this...I did the following but to no avail..
I copied the files onto the sd card then
1)rebooted in cwm
2)mounts and storage
3)mount/system
4)install zip from card
5)went into the respective folder but it says file not found
What am I doing wrong?

the file should have .zip extension.
---------- Post added at 06:53 PM ---------- Previous post was at 06:52 PM ----------
also dont choose update.zip option.
select the first option.

Thanks man,I realised my mistake....I unzipped it before transferring...My Bad...

Sim not recognized on slim bean 4.3

I installed slim bean -4.3.build2-OFFICIAL-1334-GalaxySL-JLS36G-Alpha3.zip and flashed the corresponding gapps and everything is working just fine, except my SIM is not being recognized, it shows "No Service" Selected network(TATA DOCOMO) unavailable. I have no idea why this is happening, my sim is proper when I was previously on GB stock 2.3.6. Any help guys?
Sent from my GT-I9003 using xda app-developers app

You have installed the rom which is not basically configured for ur country.. download stock firmware of ur Phone.. Make sure its of ur own country.. then in the zip file go to system/etc/firmware and copy the modem.img file and make a flashable zip file using this guide. http://forum.xda-developers.com/showthread.php?t=2163974
After creating zip file.. flash it through CWM or TWRP recovery.. then reboot your phone

mrtaim3 said:
You have installed the rom which is not basically configured for ur country.. download stock firmware of ur Phone.. Make sure its of ur own country.. then in the zip file go to system/etc/firmware and copy the modem.img file and make a flashable zip file using this guide. http://forum.xda-developers.com/showthread.php?t=2163974
After creating zip file.. flash it through CWM or TWRP recovery.. then reboot your phone
Click to expand...
Click to collapse
Hey there, thanks for replying. So, do I make a flashable zip of only the "modem.img" file? and then just flash it normally like any other zip through cwm recovery.. is that what I should do? also, i don't quite understand the procedure described in that link.. do i just replace the modem.bin file or what? sorry but i'm really not sure how to go about this??

wrongfan said:
Hey there, thanks for replying. So, do I make a flashable zip of only the "modem.img" file? and then just flash it normally like any other zip through cwm recovery.. is that what I should do? also, i don't quite understand the procedure described in that link.. do i just replace the modem.bin file or what? sorry but i'm really not sure how to go about this??
Click to expand...
Click to collapse
I'll make a flash zip for u. just tell me what device you are using right now...

Samsung galaxy SL GT-i9003
Sent from my GT-I9003 using xda app-developers app

mrtaim3 said:
I'll make a flash zip for u. just tell me what device you are using right now...
Click to expand...
Click to collapse
hey bro, you got it right? or do you want me to send the modem.bin file?

wrongfan said:
hey bro, you got it right? or do you want me to send the modem.bin file?
Click to expand...
Click to collapse
Go to system/etc/firmware if there is modem.img file then send me and if not then wait ill check out myself
---------- Post added at 05:26 PM ---------- Previous post was at 05:20 PM ----------
Download Zip file from this link and give me the modem.img file from there. http://d-h.st/dNL
---------- Post added at 05:30 PM ---------- Previous post was at 05:26 PM ----------
Hey.. i have another idea.. Flash your orignal firmware. As u said that sim works on Gingerbeard. If ur device is rooted then download root explrorer then go to system/etc/firmware and copy modem.img file to ur sd card and then send me. Ill make a zip file OK

Unlocked (639737.5) System Image Backup

I've uploaded a few updated stock files for the Unlocked variant of HTC One A9 (1.12.617.6) in case anyone needs them.
USE THESE FILES AT YOUR OWN RISK!
They can be found here: https://drive.google.com/open?id=0B8OH6sFjVE1ldGNjN29KX19zZm8
RUU_HIA_AERO_UL_M60_SENSE7GP_ATT_NA_Gen_Unlock_1.12.617.6.zip
This is an extracted zip of the latest HTC RUU.
This file will wipe everything on your phone EXCEPT External (SD) Storage
The easiest way to flash is to download the file, rename it to 2PQ9IMG.zip, copy it to your SD card, reboot to download mode and press volume up when prompted to flash
Otherwise, you can flash using htc_fastboot in RUU mode
fastboot oem rebootRUU
htc_fastboot flash zip RUU_HIA_AERO_UL_M60_SENSE7GP_ATT_NA_Gen_Unlock_1.12.617.6.zip (what is htc_fastboot? it's HTC's very own fastboot utility that allows you to flash larger files than regular fastboot. where can you find it? it's not hard)
HTC_A9_2PQ9IMG_1.12.617.6_SystemImageBackupAndBoot.zip
TWRP system image backup. This file will restore your system to an unmodified state and should allow you to take an OTA Update if you're rooted or otherwise modified your system partition
This is NOT a flashable zip. It is a regular old compressed zip file.
Download it to your computer, unzip it, and copy the contents to the TWRP backup directory (sdcard/TWRP/Backups/.../...) on your device.
Boot to recovery
Go to Mount Menu and set System to Read-Only
Go to Restore and find and select this backup folder
Optional - I've included the stock boot image in case you have flashed a modified boot image and want to restore this as well
HTC_A9_2PQ9IMG_1.12.617.6_Stock_boot.img
stock boot image extracted from the 1.12.617.6 OTA update package
flash in download mode (fastboot flash boot HTC_A9_2PQ9IMG_1.12.617.6_Stock_boot.img)
HTC_A9_2PQ9IMG_1.12.617.6_Stock_recovery.img
Stock recovery for Unlocked edition (1.12.617.6)
Save this file in your fastboot folder
Boot to DOWNLOAD mode
Flash using fastboot (fastboot flash recovery HTC_A9_2PQ9IMG_1.12.617.6_Stock_recovery.img)

jollywhitefoot said:
I've uploaded a TWRP system image backup for anyone that needs to return to stock system image and didn't make a backup with TWRP before modifying system files.
https://drive.google.com/open?id=0B8OH6sFjVE1ldGNjN29KX19zZm8
Before you restore, you need to go to the Mount menu and set System as Read-Only.
Click to expand...
Click to collapse
thanks
---------- Post added at 09:56 PM ---------- Previous post was at 09:52 PM ----------
jollywhitefoot said:
I've uploaded a TWRP system image backup for anyone that needs to return to stock system image and didn't make a backup with TWRP before modifying system files.
https://drive.google.com/open?id=0B8OH6sFjVE1ldGNjN29KX19zZm8
Before you restore, you need to go to the Mount menu and set System as Read-Only.
Click to expand...
Click to collapse
which one has to be installed in TWRP

jbea007 said:
thanks
---------- Post added at 09:56 PM ---------- Previous post was at 09:52 PM ----------
which one has to be installed in TWRP
Click to expand...
Click to collapse
The system image backup. Download it to your computer, unzip it and copy the contents to the TWRP backup folder on your device

I tried to install xposed framework on my phone but it got stuck at the boot screen after installation. I copied the system image backup files into my SD card slot and booted it in recovery (TWRP). I've done everything the instruction says and i'm at the point where I've mounted the "system" folder as read-only. I go to the restore option but i don't see any files or folders to restore from. Please help... Thank you.

CallmeTunde said:
I tried to install xposed framework on my phone but it got stuck at the boot screen after installation. I copied the system image backup files into my SD card slot and booted it in recovery (TWRP). I've done everything the instruction says and i'm at the point where I've mounted the "system" folder as read-only. I go to the restore option but i don't see any files or folders to restore from. Please help... Thank you.
Click to expand...
Click to collapse
Did you copy my folder (2015-11-14--01-18-44_MRA58K_release-keys) into your TWRP backup directory?
Edit: if you don't have a TWRP backup directory, the easiest way to create one is to just run a backup of one of the small partitions (boot/recovery).

It worked... You're the best!!!!

CallmeTunde said:
It worked...
Click to expand...
Click to collapse
Sweet. Glad to hear it.
CallmeTunde said:
You're the best!!!!
Click to expand...
Click to collapse
Can you tell my wife that? haha

While trying to root my htc one a9 I accidently deleted the /system folder. Do you know if the one you uploaded will work on a Sprint htc a9

entrpn said:
While trying to root my htc one a9 I accidently deleted the /system folder. Do you know if the one you uploaded will work on a Sprint htc a9
Click to expand...
Click to collapse
I'm not sure. Sorry.

jollywhitefoot said:
I'm not sure. Sorry.
Click to expand...
Click to collapse
Ok, maybe I'll just try it. I have nothing to lose at this point.
Thanks for the response.

Thanks a a million!! Helped me out of a pinch with mine. Mine would just reboot as soon as any app got root permissions. Restoring your system backup fixed it!

Can you upload recovery_signed.img again Thank !

nenebear said:
Can you upload recovery_signed.img again Thank !
Click to expand...
Click to collapse
Mine wasn't correct. @Captain_Throwback posted one in the root thread in the dev section last night that works.

jollywhitefoot said:
I'm not sure. Sorry.
Click to expand...
Click to collapse
I was able to do a backup of system_image in twrp, but now when I try to recover, I get unable to mount /system. Any ideas? Thanks in advance.

entrpn said:
I was able to do a backup of system_image in twrp, but now when I try to recover, I get unable to mount /system. Any ideas? Thanks in advance.
Click to expand...
Click to collapse
That's the message when you try to restore? Did you go into the mount menu and mount system as read-only (there's a check box underneath all the partitions)?

Hello, somehow I've managed to delete my OS. I'm still unlocked and s-off but when I try to restore with your file it crashed. So I wiped everything and started over. Here's my issue now. I downloaded your file and extracted it to put onto an external sd. Once I did that I made a small backup in TRWP and moved the file to sd/TRWP but when I go to restore its blank with only the small back up showing. I can't put system to read only, it think its because I have no OS. I can click/unclick everything else just not system.

FatKris said:
Hello, somehow I've managed to delete my OS. I'm still unlocked and s-off but when I try to restore with your file it crashed. So I wiped everything and started over. Here's my issue now. I downloaded your file and extracted it to put onto an external sd. Once I did that I made a small backup in TRWP and moved the file to sd/TRWP but when I go to restore its blank with only the small back up showing. I can't put system to read only, it think its because I have no OS. I can click/unclick everything else just not system.
Click to expand...
Click to collapse
You moved the backup folder under external_sd/TWRP/YOUR_SERIAL_NUMBER/ ? That's where it has to be for TWRP to see it. And that shouldn't prevent you from being able to mount system read-only (unless you're getting an error on /system, in which case you should wipe/format it).

Captain_Throwback said:
You moved the backup folder under external_sd/TWRP/YOUR_SERIAL_NUMBER/ ? That's where it has to be for TWRP to see it. And that shouldn't prevent you from being able to mount system read-only (unless you're getting an error on /system, in which case you should wipe/format it).
Click to expand...
Click to collapse
Each time I hit a dead end, I wipe and format. I am getting an error saying unable to mount system. I sent some info over to @jcase about my device and he said that HTC sent me an engineer firmware version. Does that make a difference at all?
---------- Post added at 07:17 PM ---------- Previous post was at 07:16 PM ----------
I also appreciate your patience with me @Captain_Throwback. I normally don't have issues with stuff like this.

FatKris said:
Each time I hit a dead end, I wipe and format. I am getting an error saying unable to mount system. I sent some info over to @jcase about my device and he said that HTC sent me an engineer firmware version. Does that make a difference at all?
---------- Post added at 07:17 PM ---------- Previous post was at 07:16 PM ----------
I also appreciate your patience with me @Captain_Throwback. I normally don't have issues with stuff like this.
Click to expand...
Click to collapse
Can you upload a copy of your recovery log? And please confirm where you're putting the backup folder?

FatKris said:
Each time I hit a dead end, I wipe and format. I am getting an error saying unable to mount system. I sent some info over to @jcase about my device and he said that HTC sent me an engineer firmware version. Does that make a difference at all?
---------- Post added at 07:17 PM ---------- Previous post was at 07:16 PM ----------
I also appreciate your patience with me @Captain_Throwback. I normally don't have issues with stuff like this.
Click to expand...
Click to collapse
just for info , have de same device fatKris , only the difference I have twrp-2.8.7.0_CPTB-B8-hiae and s-on.... and rooted with jcase thread.....
and in the htc download mode I dn't have the last two options , check smar sd and factory reset...... hope you fix it...

[ROM][Stock-Edited][SM-G318H]SpeedRom v3.0

I edited stock ROM to get bigger performance, and speed
《《《DISCLAIMER》》》 :
Your varianty is now void.
《《《WHAT WORKING》》》:
Everything
《《《INCLUDED》》》 :
Root (supersu)
Init.d support
Samsung music player
Deodexed
BusyBox
《《《LINK VIA MEGA》》》:
Rom link( v 3.0 for now unworking): https://mega.nz/#!2klHTIqI!IFoTxDWlcKKd8hYhVuR7sf8gB2sp46b8wzACaeiJFsU
Rom link ( v 2.0 working, Backup): https://mega.nz/#!i4EhVRRD!3cJ2wtn_v8IA-S_qkxHYNHRgnww5T7-f8OZLlcoWjD4
Gapps: http://opengapps.org/
《《《WHAT YOU NEED TO INSTALL》》》:
1. TWRP
2. Speed rom v3 zip
《《《INSTALL GUIDE》》》:
1. Boot in TWRP
2. Wipe data,system(sytem last one before flash)
3. Select install
4. Lead to place where you put zip
5. Install
If something not works post here...
If you liked hi the thanks button

《《《CHANGE LOG》》》
>>In V2.0
Keyboard changed
Ui moded
Ram up to 250mb☆
Better multitasking
>>In V3.0
Added stock sound
Deodexed
Now flashable zip!
Download in 1# post at links

《《《LINK VIA MEGA》》》:
https://mega.nz/#!m40GXT7D!3btGJfoDJcdKmH_v8DK32RXEUx2XT19uVkhCFCrmpis
《《《INSTALL GUIDE》》》:
1. Put file in sdcard/TWRP/backups or /ex_sdcard/TWRP/BACKUPS
2. Boot in TWRP
3. Wipe data
4. Select restore
5.Chose storage (depends where you put file
6.Select "Stock Edited ROM SM-G318H"
7. Select system
8. Restore
I will later make flashable zip
If something not works post here...[/QUOTE]
Hi..
first of all thanks for making this.
I have put in this rom (mega link: SpeedRom_V_1.0_TechTex198.zip) in /ex_sdcard/TWRP/BACKUPS | sdcard/TWRP/backups
In TWRP (v2.8.7.0) when I am under Restore I cannot Select "Stock Edited ROM SM-G318H"
Please suggest.

hannah187 said:
《《《LINK VIA MEGA》》》:
https://mega.nz/#!m40GXT7D!3btGJfoDJcdKmH_v8DK32RXEUx2XT19uVkhCFCrmpis
《《《INSTALL GUIDE》》》:
1. Put file in sdcard/TWRP/backups or /ex_sdcard/TWRP/BACKUPS
2. Boot in TWRP
3. Wipe data
4. Select restore
5.Chose storage (depends where you put file
6.Select "Stock Edited ROM SM-G318H"
7. Select system
8. Restore
I will later make flashable zip
If something not works post here...
Click to expand...
Click to collapse
Hi..
first of all thanks for making this.
I have put in this rom (mega link: SpeedRom_V_1.0_TechTex198.zip) in /ex_sdcard/TWRP/BACKUPS | sdcard/TWRP/backups
In TWRP (v2.8.7.0) when I am under Restore I cannot Select "Stock Edited ROM SM-G318H"
Please suggest.[/QUOTE]
Do you putted in sdcard/... folder with name 1101...
Or instantly stock edited...?

TechTex198 said:
Do you putted in sdcard/... folder with name 1101...
Or instantly stock edited...?
Click to expand...
Click to collapse
I am afraid I could not understand you here.
This is what I have done:
I tried this location in the internal storage:
sdcard/TWRP/backups
I also tried this location in external sd card:
ex_sdcard/TWRP/BACKUPS
In both the cases, I could not select "Stock Edited ROM SM-G318H"
I hope I am quite clear in what I have done so far. I am using TWRP (v2.8.7.0) to do this work.
Please help.

hannah187 said:
I am afraid I could not understand you here.
This is what I have done:
I tried this location in the internal storage:
sdcard/TWRP/backups
I also tried this location in external sd card:
ex_sdcard/TWRP/BACKUPS
In both the cases, I could not select "Stock Edited ROM SM-G318H"
I hope I am quite clear in what I have done so far. I am using TWRP (v2.8.7.0) to do this work.
Please help.
Click to expand...
Click to collapse
Extracte directly in /TWRP/backups folder 11016dd1bc82924a
And try agian

Are you saying that I need to unzip SpeedRom_V_1.0_TechTex198.zip file in this location:
/TWRP/backups
And is this /TWRP/backups folder under sdcard or external sdcard please?
I believe you mentioned that you are going to make a flashable zip. Is that correct?
Are you going to build a

hannah187 said:
Are you saying that I need to unzip SpeedRom_V_1.0_TechTex198.zip file in this location:
/TWRP/backups
And is this /TWRP/backups folder under sdcard or external sdcard please?
I believe you mentioned that you are going to make a flashable zip. Is that correct?
Are you going to build a
Click to expand...
Click to collapse
Yes unpack i will extract this bacup later and make flashable zip but i have hard idea to make cm11 or cm12.1

TechTex198 said:
Yes unpack i will extract this bacup later and make flashable zip but i have hard idea to make cm11 or cm12.1
Click to expand...
Click to collapse
Great idea, but does the TREND2 has enough hardware to suport cm12.1?
Thanks, and keep this good work.:good:

djekan said:
Great idea, but does the TREND2 has enough hardware to suport cm12.1?
Thanks, and keep this good work.:good:
Click to expand...
Click to collapse
I think that yes, i have seen similar device's with same hardware.

TechTex198 said:
I think that yes, i have seen similar device's with same hardware.
Click to expand...
Click to collapse
ok go ahead :good:
---------- Post added at 12:57 AM ---------- Previous post was at 12:14 AM ----------
Hi,
I've tried this but without success, have you tried in your device? Witch TWRP?
After unzip the folder and put on twrp folder I reboot into twrp / restore from external SD but don't appear that folder, no twrp folder or backup folder or firmware folder, I think the version of the twrp isn't correct (2.8.0.7) for this device SM-G318H, can you provide the correct twrp?
If o try install that folders appears but this is to flash zip
Sent from my XT1541

I restored ur backup it says not rooted no su binary found brother

djekan said:
ok go ahead :good:
---------- Post added at 12:57 AM ---------- Previous post was at 12:14 AM ----------
Hi,
I've tried this but without success, have you tried in your device? Witch TWRP?
After unzip the folder and put on twrp folder I reboot into twrp / restore from external SD but don't appear that folder, no twrp folder or backup folder or firmware folder, I think the version of the twrp isn't correct (2.8.0.7) for this device SM-G318H, can you provide the correct twrp?
If o try install that folders appears but this is to flash zip
Sent from my XT1541
Click to expand...
Click to collapse
Yes tried for me its sucssesfull

ballerd said:
I restored ur backup it says not rooted no su binary found brother
Click to expand...
Click to collapse
Download supersu (find in google) flash trought twrp and done

I figured it out mate thanks brother

TechTex198 said:
Download supersu (find in google) flash trought twrp and done
Click to expand...
Click to collapse
Flash supersu,
?? but tat is for root, I want flash your speedrom v1. 0 to try that.
Sent from my XT1541

djekan said:
Flash supersu,
?? but tat is for root, I want flash your speedrom v1. 0 to try that.
Sent from my XT1541
Click to expand...
Click to collapse
Move folder stock editet rom to /.../TWRP/(here must be folder with numbers and words, open it) paste in this path

TechTex198 said:
Move folder stock editet rom to /.../TWRP/(here must be folder with numbers and words, open it) paste in this path
Click to expand...
Click to collapse
The same, not appear anything to restore, I think I use a wrong TWRP because I can't backup nothing, start but in middle stops, witch version did you use?
Can you put here a link to a Wright version?
Thanks
Enviado do meu XT1541 através de Tapatalk

djekan said:
The same, not appear anything to restore, I think I use a wrong TWRP because I can't backup nothing, start but in middle stops, witch version did you use?
Can you put here a link to a Wright version?
Thanks
Enviado do meu XT1541 através de Tapatalk
Click to expand...
Click to collapse
Take look to 2nd post there is twrp try to flash

TechTex198 said:
Take look to 2nd post there is twrp try to flash
Click to expand...
Click to collapse
Hi,
on 2nd post wasn´s nothing about TWRP

Mate 8 error flashing TWRP, plz help

Hi,
Today I just started rooting my mate 8,
Everything worked fine as I was able to easily unlock the boot loader free ,but when it came to flash twrp.img file in cmd it started showing errors, I downloaded almost 5 6 img files but nothing is going on, it shows 'cannot load twrp.img file', :/ I hv spent like almost 2 hours flashing nd searching for answer but their is no thread with suitable answer, many people have this problem, Plz help.

u either have to put the twrp image file into the same directory as your ADB/fastboot installation or navigate to the respective folder location via the recovery flash command
Sent from my Huawei Mate 8 NXT-AL10

jbmc83 said:
u either have to put the twrp image file into the same directory as your ADB/fastboot installation or navigate to the respective folder location via the recovery flash command
Sent from my Huawei Mate 8 NXT-AL10
Click to expand...
Click to collapse
I hv the twrp in the 'minimal ADB and Fastboot' folder, I hv actually tried 5 6 different twrp.img files but none of them worked. and also I hv tried renaming them and flashing them again but it didnt worked.

AHK123 said:
I hv the twrp in the 'minimal ADB and Fastboot' folder, I hv actually tried 5 6 different twrp.img files but none of them worked. and also I hv tried renaming them and flashing them again but it didnt worked.
Click to expand...
Click to collapse
Hi AHK123,
send us a screenshot please.

AHK123 said:
Hi,
Today I just started rooting my mate 8,
Everything worked fine as I was able to easily unlock the boot loader free ,but when it came to flash twrp.img file in cmd it started showing errors, I downloaded almost 5 6 img files but nothing is going on, it shows 'cannot load twrp.img file', :/ I hv spent like almost 2 hours flashing nd searching for answer but their is no thread with suitable answer, many people have this problem, Plz help.
Click to expand...
Click to collapse
Try this version of Fastboot & ADB:
https://drive.google.com/file/d/0B5I_q70mNuR4UzdkeERRZExnUVk/view?usp=drivesdk

grofock said:
Hi AHK123,
send us a screenshot please.
Click to expand...
Click to collapse
xda is not letting me upload, as I am a new member

ajsmsg78 said:
Try this version of Fastboot & ADB:
https://drive.google.com/file/d/0B5I_q70mNuR4UzdkeERRZExnUVk/view?usp=drivesdk
Click to expand...
Click to collapse
I hv tried it but it didnt worked well, I had to reinstall the minimal adb nd fastboot that I had, I hv even unlocked my bootloader from it. the commands are working fine on my phone from the pc.

AHK123 said:
I hv tried it but it didnt worked well, I had to reinstall the minimal adb nd fastboot that I had, I hv even unlocked my bootloader from it. the commands are working fine on my phone from the pc.
Click to expand...
Click to collapse
try install flashify from play store then copy the file img to internal storage or sdcard then flash it from phone

hamadazh said:
try install flashify from play store then copy the file img to internal storage or sdcard then flash it from phone
Click to expand...
Click to collapse
already tried, it says root is required.

AHK123 said:
already tried, it says root is required.
Click to expand...
Click to collapse
oh you not rooted yet sorry
ok try this go to settings then > developer settings > Enable OEM unlock make it on then try again
---------- Post added at 10:16 PM ---------- Previous post was at 10:02 PM ----------
which twrp version you tried?

hamadazh said:
oh you not rooted yet sorry
ok try this go to settings then > developer settings > Enable OEM unlock make it on then try again
---------- Post added at 10:16 PM ---------- Previous post was at 10:02 PM ----------
which twrp version you tried?
Click to expand...
Click to collapse
the main problem I hv is that the twrp.img file is zipped nd my winrar and winzip cannot extract it, so can u give me twrp.img without zip, I hv searched a lot but all are in zip format

AHK123 said:
the main problem I hv is that the twrp.img file is zipped nd my winrar and winzip cannot extract it, so can u give me twrp.img without zip, I hv searched a lot but all are in zip format
Click to expand...
Click to collapse
here the one with EMUI 4.0 if you have it already
http://forum.xda-developers.com/mate-8/development/recovery-twrp-huawei-mate-8-t3298567

hamadazh said:
here the one with EMUI 4.0 if you have it already
http://forum.xda-developers.com/mate-8/development/recovery-twrp-huawei-mate-8-t3298567
Click to expand...
Click to collapse
I hv download the trwp black and blue image file, now when I click to extract it in winzip or winrar, itsay the archive is either of unknown format or dAmaged.
Edit: So today after some hardwork I was able to flash the twrp.img file, then I format my device through it, everything worked fine, but when the home screen appeared it was very simple and sort of very 'BASIC', I went to 'THEMES' icon on my mate 8 but their were no themes like Mocha etc, what should I do now? I want my old themes back, is their any way?

AHK123 said:
I hv download the trwp black and blue image file, now when I click to extract it in winzip or winrar, itsay the archive is either of unknown format or dAmaged.
Edit: So today after some hardwork I was able to flash the twrp.img file, then I format my device through it, everything worked fine, but when the home screen appeared it was very simple and sort of very 'BASIC', I went to 'THEMES' icon on my mate 8 but their were no themes like Mocha etc, what should I do now? I want my old themes back, is their any way?
Click to expand...
Click to collapse
no don't extract image file that's the reason for your error just download it then flash it .
theme problem go and search in themes section
http://forum.xda-developers.com/mate-8/themes-apps