I have noticed this bug on my Atom with O2 Plus and need confirmation from other users before I try to feedback to their support.
I have found that my Atom intermittently does not sound Notifications and Alarms. Couldn't figure why for awhile then I discovered this workaround :
1.
Using O2 Plus, switch profile to Silent. You will notice speaker icon on the top bar shows muted.
2.
Switch profile back to Normal. The icon at the top bar now shows the speaker as ON (but actually notifications and remoinders will now fail i.e. not sounding)
3.
Go to Settings / Sounds & Notifications / Notifications
On the Event drop down, select reminders
4.
You will see your notification alarm sound with a "test play" button.
Hit the test play button a couple of times, then wait a few seconds.
5.
You will mysteriously see the speaker status in the top bar change to MUTE !!! Click on it, turn speaker back on, close all the windows. Your notifications will now sound correctly at the appointed alarms and calendar times.
It seems the O2 Plus profile when switching back from silent to normal does not do a full job in turning on the notification sounds, just system sound or something like that.
If you carry out this procedure everytime you switch your profile you will no longer have missing / silent notifications !
Can other users confirm this bug / phenomenon ?
Anyone able to write a simple proggy or script to do the above procedure automatically ?
Haven't noticed it before, and I haven't missed any notifications, but you're right.
yeah i noticed this!!!THANKS FOR THE FIX!
just to add.besides notifications, you also lose screen taps when switching from different profiles.this apparently is not fixed by your solution.
Hi,
Do any of you 750 owners have seen this before?
Lately (a week or so ago) I started to get calls and the "notification" popup won't come up. I hear the ring and vibrate and there is a phonecall icon on the top bar next to the data arrows but the notification is missing so I can't see who's calling.
If/when I answer I can finally see the caller information.
This doesn't happen with every call (probably with about half of them per day).
Any idea or did you hear about something similar?
Thanks,
Zax.
Haven't had that particular problem, but I've had other issues when calls come in.
Sometimes (after I've put the device from silent to regular mode using the top slider) the phone doesn't ring and doesn't vibrate although the call notification is showing on screen. This gets fixed after one or more soft resets.
On a fair few other occasions - this is intermittent and extremely annoying - the phone doesn't react at all when someone calls me (no notification, no vibrate, no ring - nothing) but I get a audible and visible missed call notification after the caller has given up / been diverted to voicemail. This problem goes away of its own accord eventually; restarts don't seem to have any effect.
Seriously, if this device wasn't a fairly good PDA as well as a phone, I'd put it in the bin.
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
jimmynotch said:
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
Click to expand...
Click to collapse
What format is the ring tone in?
My ringtone is the 'Oldphone2' and it is set at'vibrate and ring'. It just spontaneously started this non-ringing thing this morning prompted by no changing of settings. As I said, I tried messing around with the setting after it stopped ringing, but to no avail. And the frustrating thing is that everything else seems to work fine. Argh!
This may seem silly, but have you checked your ring volume? I've had a situation a few times, for no apparent reason after disconnecting from Activesync, where my ring volume was down to 0. Just a thought.
I HAVE SAME PROBLEM, when you turn all to vibrate only and turn it back up . the ring stop working
Yes. all volume settings are up. ringer volume, call volume, media player volume.... Any other suggestions?
i had the same problem just now.. but changing the ringtone back to the ATT default one fixed it. I also use S2U2 and changing the setting for "vibrate when answered" or something like that seems to have fixed it as well.
Hope that helps.
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
jimmynotch said:
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=412418
this happened to me too and i hard resetted. that fixed it , then it started again. come to find out th eproblem was when i hit the volume key on the side i turned system valume up and didnt click on ringer volume to turn it up . i had to smack myself
do texts ringer still work?? if so then im pretty sure you have the same problem i had, check it. good luck though
Do you have the unit face down? It has an auto mute when face down.
I also have an alarm problem, although lights go off, the alarm doesn't ring. I also have problems with ringing on incoming calls. The speaker otherwise works fine. Volumes are turned on appropriately. I have Natfv4.0 installed. Do any of the roms fix this problem?
So somehow the problem fixed itself. Dont know how as I didnt even touch my phone for two days. I just turned it on and -BOOM- it rang a few minutes later. Totally spontaneous issue. Really strange this phone is sometimes...
Boy, do I feel dumb.....Never even noted the un hi-lighted RING volume TAB...
I guess I can't use THAT excuse for not answering calls...
Thanks
Ron
I've been having the same problem. It's very baffling to say the least. I believe it was caused by the newer versions of S2U2. Don't know if it's been discussed in that thread or not. Both times this ringer 'glitch' has occurred, it's been when I've password protected S2U2 in settings. The issue was fixed by turning the password protection off, restarting S2U2, soft resetting my Fuze.
I am having the same problem with incoming calls not playing the ring tone and missing calls. I can guarantee you that the system/ring volume controls are at maximum. I have switched ring tones to no avail. It seems to have something to do with changing the ring type from ring to increasing ring and or visa versa. When I change ring type the problem exists. If I turn system/ring volume to silent and then back to maximum it plays the ring tone just fine. There is a bug in there somewhere! I also see a 'send text' lower left of screen and I hear a blurp sound or two in the background wihile the ringtone is playing when the phone is ringing. Anyone else have any issues like this? If so or you have a fix please send it to [email protected] I'm new to this forum stuff and don't really know how to use it. Hope I didn't break any rules.
Thank you,
Trent Alexander
I just have the callers complaining that I take too long to answer the phone. I called myself, and it took 3 1/2 rings for my Fuze to ring...anyone else?
Great PPC, Lousy Phone
Mine too. I just tried it and it does not ring until seven seconds after the light starts flashing. Not only that, it will not retain a custom ring tone. I try to use Old Phone 2 but it reverts to the default on its own.
My vario iv also suffers from the missing ring tone- reboots sometimes help but not always.
I too have had to learn not to rely on the alarm- goes off some days and then not on others.
Just now I thought that I would try to play an mp3 to see if that works- I pressed play and then waited for the track to start- no sound- seconds later the screen changed and touchflow launched itself (again) went back to the home tab and the sound is back?????
Same problem... it stopped ringing...
one thing I notice is that if the number calling is private or block it will only light up (no ring) but from a caller with Caller ID open the phone will ring...
strange...
In a meeting kept getting IMs, and the watch beeped every time. It was distracting and I was annoying people in the room so I pulled down the settings and clicked on the speaker icon. The symbol is now the speaker with the line through it but the sound is not Disabled !!!!!!
What can I be doing wrong ? In some situations it is inappropriate for the watch to make sounds but I can not turn sound off.
hello,
never happen to me, I will investigate and if possible give you feedback.
regards
AstroDigital said:
In a meeting kept getting IMs, and the watch beeped every time. It was distracting and I was annoying people in the room so I pulled down the settings and clicked on the speaker icon. The symbol is now the speaker with the line through it but the sound is not Disabled !!!!!!
What can I be doing wrong ? In some situations it is inappropriate for the watch to make sounds but I can not turn sound off.
Click to expand...
Click to collapse
Not sure if you are new in android. Android has 3 volume for adjustment. You need to control them one by one. You mute the media volume, but you will still get sound from notification, or ring.
Check out more audio option in the option menu, not the quick slide down icons.
mcdull said:
Not sure if you are new in android. Android has 3 volume for adjustment. You need to control them one by one. You mute the media volume, but you will still get sound from notification, or ring.
Check out more audio option in the option menu, not the quick slide down icons.
Click to expand...
Click to collapse
It also has One Setting to turn the Speaker On and Off. This is what did not work yesterday.
Turn the Speaker off at the meeting on again when it ends. Easy if it worked
Looks like the App "Feel the Wear" was causing this issue.
The developer updated the app and now turning the speaker off mutes notifications.
Got a new phone. Restored my messages via Titanium Backup, and now instead of getting vibrations I'm getting beeps. It hasn't changed anything from "vibrate" to "play beep sound", things that are set to "vibrate" just have the beeps now.
I'm having the same issue on the old phone. I have no idea what caused it.
EDIT: Okay, cycling from ring to silent to vibrate a few times has got the vibration back, at least, but the beep is still there.