Database Info

[Q] Galaxy S Bricked-HELP!

Hi guys
First post, so please be nice
I recently received a galaxy s on the virgin 29 cap. Today I decided to upgrade to froyo 2.2.1 via odin, it worked flawlessly. Next I installed hardcore kernel with lag fix enabled. After that I decided to install Darkys custom Rom. Due to not removing the lag fix it started looping on the samsung galaxy S logo. I decided to restore it to factory settings via flashing, however halfway through the flash Odin displayed FAIL, so i disconnected my USB cable. Now whenever I turn it on the phone gets stuck on the samsung logo. If i plug in the charger/usb cable an empty battery sign comes up with a non-spinning disk.
The worst part is I cannot access the download mode or recovery mode.
Any help would be appreciated.
Thanks
Note:Im sorry if there are other threads but I am really distressed.

Give this a shot: (from this link)
Unplug your Device
Pull out the SIM, External SD Card, and Battery
Plug in the mini-USB Cable back into your phone.
While holding down BOTH Up/Down Volume Buttons re-insert the battery.
If you get the "grey battery charging" screen. Then you will need to try and re-attempt it as it didn't work. You should get the download screen and be ready to go back to stock.
Just so you know, your question really belongs here, in the Captivate Q&A section. There's lots more in all the stickies within that subforum you should study
If that doesn't work, you may need a jig.

Thanks
Unfortunately your methods did not work. I am considering making/buying a jig however i am unsure whether or not it will work- My phone will not turn on unless plugged into the charger/computer. When I plug it in an empty battery icon appears with a non-rotational disk.

umz93 said:
Thanks
Unfortunately your methods did not work. I am considering making/buying a jig however i am unsure whether or not it will work- My phone will not turn on unless plugged into the charger/computer. When I plug it in an empty battery icon appears with a non-rotational disk.
Click to expand...
Click to collapse
Oh, dear, that does sound like a brick. Josh from Mobiltech may be able to help you. He also sells jigs, if you're not technically apt (like me )

I have purchased a jig, hopefully it works! Thanks for all your help.

umz93 said:
I have purchased a jig, hopefully it works! Thanks for all your help.
Click to expand...
Click to collapse
You're welcome - and there's a button for that
Good luck with it!

Phone wont turn on - need to send to verizon but its rooted

I recently got a microusb to usb female cable and was playing around with it on my s3. I wanted to see if the s3 could power a laptop cooling fan (Im a curious guy) and plugged in the usb cooling pad. The pad worked to my surprise but it suddenly shut off. I look at the s3 and the s3 is off too. I try turning it back on but that didnt work. I try taking the battery out and then turning it on but that didnt work. I plugged it into a charger and tried turning it on but that didnt work either. I even tried booting it into download mode and that didnt work. I have tried almost every troubleshooting method including trying a different battery and that did not work either. My phone is rotoed with CM10 on it and I need to send it back to verizon once I get my replacement. Is there a way to reset the internal sd card even when the phone wont turn on? Will verizon even find out if the phone is rooted if it wont turn on? Has anyone ever sent in a rooted phone to verizon once they got a replacement and been ok? Your help, thoughts, and any input would be greatly appreciated. Thank you. (As calm as I may sound i am freaking the crap out right now).

My first tip is to stop posting the same question. It's been answered in your previous threads. Just like droidstyle said they won't know if it's rooted unless you tell them. As far add testing the internal memory, there is no way since it won't turn on.
Sent from my SGS3 running Eclipse 2.1

Q: dead or still alive?

Hi all experts.
I have one inquiry about my Samsung galaxy S II lte (SGH-1727) Issue.
at the beginning I read too much here but I couldn't find any answer for my phone problem.
the problem happened yesterday, when I was using my phone as usual then suddenly restarted, this issue happen many times before and its ok for me, it tried to restart but suddenly stopped( black screen), I removed the battery then I tried to restart it again, I felt the vibrating start, then stopped, without any respond at all till now, I tried many times to remove the battery and restart it but without any respond, I connected it by using the usb cable, but nothing, ( no vibration, no battery charging) the only thing is my computer can`t recognize the hardware.
I tried to do hard reset or anything, but without any respond.
Kindly, I want to know weather if this phone is totally spoiled or there is something I can do for it to make it usable again, I have a good knowledge about WM5,6,6.1,6.5. but a little bit about android.
thanks

What operating system are you on? Rooted? Do have have a nandroid backup?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

alanjames01 said:
What operating system are you on? Rooted? Do have have a nandroid backup?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
thanks for the fast respond.
its the last update of android JB official rom of Samsung rogers Canada.

homam_france said:
thanks for the fast respond.
its the last update of android JB official rom of Samsung rogers Canada.
Click to expand...
Click to collapse
Did u read about the sticky power button from here http://forum.xda-developers.com/showthread.php?t=2176593.
if you tried resetting then where you able to get it in to recovery mode
could be bad battery and/or battery contacts.
need more info

vincom said:
Did u read about the sticky power button from here http://forum.xda-developers.com/showthread.php?t=2176593
Click to expand...
Click to collapse
I have been read the button problems for sure, but I think it is not related to the button, there is no respond at all, even not charging, usually if I use the charger, it should start charging, correct me if I`m wrong.
the battery was full and working fine, I tried to clean the connectors too, nothing changed.

homam_france said:
I have been read the button problems for sure, but I think it is not related to the button, there is no respond at all, even not charging, usually if I use the charger, it should start charging, correct me if I`m wrong.
the battery was full and working fine, I tried to clean the connectors too, nothing changed.
Click to expand...
Click to collapse
could be a bad cable, bad battery, bad phone port, or hw failure.
id keep trying to revive it by either changing cable/charger and/or battery and keeping it plugged in for a long time, if all else fails then it probably a bad mobo or memory, happened to my sons s2 where his was getting hot while recharging and his phone died, no response of any kind, under warranty i think they replaced his mobo

vincom said:
could be a bad cable, bad battery, bad phone port, or hw failure
Click to expand...
Click to collapse
maybe the main board too.
thanks.

homam_france said:
maybe the main board too.
thanks.
Click to expand...
Click to collapse
yup, i added more info in my previous post

vincom said:
yup, i added more info in my previous post
Click to expand...
Click to collapse
so it means there is a possibility that the battery can spoil suddenly, without any previous indication.
nothing with USB cable.
anyway, thanks for your good information, appreciated.

homam_france said:
so it means there is a possibility that the battery can spoil suddenly, without any previous indication.
nothing with USB cable.
anyway, thanks for your good information, appreciated.
Click to expand...
Click to collapse
if battery is removed and phone is plugged in it should vibrate, mine does, seems as if yours does not have any life so mobo would be my first guess.
and yes battery could just up and die, but would give some symptoms b4 hand

vincom said:
if battery is removed and phone is plugged in it should vibrate, mine does, seems as if yours does not have any life so mobo would be my first guess.
and yes battery could just up and die, but would give some symptoms b4 hand
Click to expand...
Click to collapse
no, it is not vibrate when I plug in the USB cable, I believe it has major problem, in all cases, thanks.

Trullty Dead?
so i have spent lots of time looking for this issue with my Hercules. i had beeb trying some roms and i think i bricked it, bad,
so odin can see it (gets a yellow) but;
i can not power on the device, get it into recovery OR download mode,
my pc cant get to the information on the phone (i have tried with SD in/ out SIM in /out)
the pc makes the noise when i cycle thru power, but the screen shows nothing,
i have installed Kies but it dosent see the device,
there hasnt been a good post that comfirms that my phone is now a paper weight,
but there has to be a way other than spending $40 to have it repaired (not including shipping)
USB JIG looks interesting but i cant see how that will help in this case...
to be honest this is my first time at ROMing around with a Galaxy,
previously i had an Gooapple 3G and was able to ROM around quite abit no issues with a bad brick like this i was able to save it before
but if anyone has any ideas or can confirm its a hardbrick let me know i only have a few hours between jobs to fix it and cant at night gf takes laptop to night shifts.
thanks for your time reading over if you have questions about anything please ask, i payed for the phone outright to put on Rogers so there is no warrenty anymore and Rogers wont cover repair.

moneymilitia416 said:
so i have spent lots of time looking for this issue with my Hercules. i had beeb trying some roms and i think i bricked it, bad,
so odin can see it (gets a yellow) but;
i can not power on the device, get it into recovery OR download mode,
my pc cant get to the information on the phone (i have tried with SD in/ out SIM in /out)
the pc makes the noise when i cycle thru power, but the screen shows nothing,
i have installed Kies but it dosent see the device,
there hasnt been a good post that comfirms that my phone is now a paper weight,
but there has to be a way other than spending $40 to have it repaired (not including shipping)
USB JIG looks interesting but i cant see how that will help in this case...
to be honest this is my first time at ROMing around with a Galaxy,
previously i had an Gooapple 3G and was able to ROM around quite abit no issues with a bad brick like this i was able to save it before
but if anyone has any ideas or can confirm its a hardbrick let me know i only have a few hours between jobs to fix it and cant at night gf takes laptop to night shifts.
thanks for your time reading over if you have questions about anything please ask, i payed for the phone outright to put on Rogers so there is no warrenty anymore and Rogers wont cover repair.
Click to expand...
Click to collapse
If Odin sees it there's hope. Keep trying to get into download mode. This should be helpful, read it all http://forum.xda-developers.com/showthread.php?p=26056924

moneymilitia416 said:
so i have spent lots of time looking for this issue with my Hercules. i had beeb trying some roms and i think i bricked it, bad,
so odin can see it (gets a yellow) but;
i can not power on the device, get it into recovery OR download mode,
my pc cant get to the information on the phone (i have tried with SD in/ out SIM in /out)
the pc makes the noise when i cycle thru power, but the screen shows nothing,
i have installed Kies but it dosent see the device,
there hasnt been a good post that comfirms that my phone is now a paper weight,
but there has to be a way other than spending $40 to have it repaired (not including shipping)
USB JIG looks interesting but i cant see how that will help in this case...
to be honest this is my first time at ROMing around with a Galaxy,
previously i had an Gooapple 3G and was able to ROM around quite abit no issues with a bad brick like this i was able to save it before
but if anyone has any ideas or can confirm its a hardbrick let me know i only have a few hours between jobs to fix it and cant at night gf takes laptop to night shifts.
thanks for your time reading over if you have questions about anything please ask, i payed for the phone outright to put on Rogers so there is no warrenty anymore and Rogers wont cover repair.
Click to expand...
Click to collapse
Oh thanks, I just noticed your comment because I thought there is no chance to get my phone alive again, I think I should try this, I have one question regarding the usb jig, is there a specific JIG for every samsung galaxy model? or it is all the same for the micro USB Samsung galaxy phones? and in this case, what is the indication that will make the device run again, is there a special software to install? or after plug this JIG I can be in the bootloader? and is there any possibility to get some of my data or contacts again? thanks for your respond regarding my phone issue.

Jigs don't with on this device. Don't waste your time.
You need to try to odin the stock firmware.

jd1639 said:
Jigs don't with on this device. Don't waste your time.
You need to try to odin the stock firmware.
Click to expand...
Click to collapse
This is incorrect. Jigs do in fact work. However most of the time you will be able to enter download mode without one.
I have had my skyrocket completely unresponsive to any input/button combinations. I tried my homemade jig and was able to recover via Odin. Without the jig my skyrocket would not have been repaired.
Sent from my Nexus 4 using Tapatalk

toyes said:
This is incorrect. Jigs do in fact work. However most of the time you will be able to enter download mode without one.
I have had my skyrocket completely unresponsive to any input/button combinations. I tried my homemade jig and was able to recover via Odin. Without the jig my skyrocket would not have been repaired.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
I'm still skeptical about that, I think something was amis with your situation lol.
Sent from my SGH-I727 using Tapatalk

toyes said:
This is incorrect. Jigs do in fact work. However most of the time you will be able to enter download mode without one.
I have had my skyrocket completely unresponsive to any input/button combinations. I tried my homemade jig and was able to recover via Odin. Without the jig my skyrocket would not have been repaired.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
so to confirm, phone had no signs of life, if yes then this is cool, is ur homemade jig the same as the ones on ebay as users did try those w/no luck.
any instructions on making one

toyes said:
This is incorrect. Jigs do in fact work. However most of the time you will be able to enter download mode without one.
I have had my skyrocket completely unresponsive to any input/button combinations. I tried my homemade jig and was able to recover via Odin. Without the jig my skyrocket would not have been repaired.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
hi toyes
just a question regarding your experience regarding this issue, do you mean it was totally unresponsive? not even yellow sign? not even vibrate by connecting the USB cable? and regarding USB JIG, is it the same with 301k resistance? or there is some modifications?
thanks a lot.

TheCybertronian said:
I'm still skeptical about that, I think something was amis with your situation lol.
Click to expand...
Click to collapse
vincom said:
so to confirm, phone had no signs of life, if yes then this is cool, is ur homemade jig the same as the ones on ebay as users did try those w/no luck.
any instructions on making one
Click to expand...
Click to collapse
homam_france said:
hi toyes
just a question regarding your experience regarding this issue, do you mean it was totally unresponsive? not even yellow sign? not even vibrate by connecting the USB cable? and regarding USB JIG, is it the same with 301k resistance? or there is some modifications?
thanks a lot.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1731818&page=644
Read starting at post 6435 for the next page or so...
Basically I had zero response from the phone. Was playing around with the jig and buttons, put the phone down with the jig in it. Looked back 5 mins later and it was in download mode.
I do think there is something different with my device though. Ever since I got it back from JTAG it has never wanted to reboot. Selecting reboot just shuts the phone down. Every once in awhile it reboots from recovery ok, but that is about 1 in every 10 attempts. When it doesn't reboot I need to long-press the power for about 30s - 1m to get it to fire back up. I am thinking it is some type of hardware issue but not too concerned because at this point it is still 'working'.
Sent from my Nexus 4 using Tapatalk

[Q] Device Won't Power On or Boot to Recovery, Please Help

Hey Guys,
I'm not sure if this is hard bricked, soft bricked, or just altogether screwed. It's a stock Verizon SCH-I535 my wife had and wasn't rooted or anything. One day it just woke up off the charger and wouldn't turn on. Removing the battery and turning it on, it'll show the Samsung Galaxy SIII splash page and then go to a black screen. It will not boot into recovery, just vibrates then shows a black screen. It will boot into Download mode, however the Samsung Upgrade Assistant freezes at 83% when trying to repair it and Odin just hangs at SetupConnection... or Initializing...
I've tried different usb ports and cables. I've tried instructions from various threads such as
http://forum.xda-developers.com/showthread.php?t=1840030
http://forum.xda-developers.com/showthread.php?t=2586319
flashing a .PIT file and everything else I could find, to no avail. Is it just time to throw in the towel or is there something else worth trying? Thank you,
Nila

Bump

Bump, bump bump bump. Is there any way to check if this is hardware related?

[email protected] said:
Hey Guys,
I'm not sure if this is hard bricked, soft bricked, or just altogether screwed. It's a stock Verizon SCH-I535 my wife had and wasn't rooted or anything. One day it just woke up off the charger and wouldn't turn on. Removing the battery and turning it on, it'll show the Samsung Galaxy SIII splash page and then go to a black screen. It will not boot into recovery, just vibrates then shows a black screen. It will boot into Download mode, however the Samsung Upgrade Assistant freezes at 83% when trying to repair it and Odin just hangs at SetupConnection... or Initializing...
I've tried different usb ports and cables. I've tried instructions from various threads such as
http://forum.xda-developers.com/showthread.php?t=1840030
http://forum.xda-developers.com/showthread.php?t=2586319
flashing a .PIT file and everything else I could find, to no avail. Is it just time to throw in the towel or is there something else worth trying? Thank you,
Nila
Click to expand...
Click to collapse
Have you tried using a new battery? I would be VERY surprised if it was a software issue if you hadn't messed with it prior. I'd be even more surprised if it was a hardware issue other than something like just a toasted battery

XdrummerXboy said:
Have you tried using a new battery? I would be VERY surprised if it was a software issue if you hadn't messed with it prior. I'd be even more surprised if it was a hardware issue other than something like just a toasted battery
Click to expand...
Click to collapse
Thanks for the thought. I borrowed a friend's battery and it was the same. Just stopped on the Galaxy SIII splash screen and then went to black. I'm probably going to call it toasted and go for an S5.
Nila

[email protected] said:
Thanks for the thought. I borrowed a friend's battery and it was the same. Just stopped on the Galaxy SIII splash screen and then went to black. I'm probably going to call it toasted and go for an S5.
Nila
Click to expand...
Click to collapse
What about a stuck power button? Seems like a decent number of people are having that issue

rooted S6 dead after factory reset

I wanted to factory reset my phone as one of my friends needs it for a few weeks/months,
phone shut down, went into twrp, shut down again and now its completely dead.
No way to get any signs from it, I dont get any response from my screen when plugged in to charge and the LED does not light up either.
Plug in wall wont work, PC connection wont work, Powerbank not working and wireless charging doesnt get any repsonse either.
Its just straight up dead, if there is nothing I can do then oh well its my old phone anyways, would still be grateful for any help tho as my friend is in a hard situation rn.
Ty in advance to everyone trying to help.

HooƉini said:
I wanted to factory reset my phone as one of my friends needs it for a few weeks/months,
phone shut down, went into twrp, shut down again and now its completely dead.
No way to get any signs from it, I dont get any response from my screen when plugged in to charge and the LED does not light up either.
Plug in wall wont work, PC connection wont work, Powerbank not working and wireless charging doesnt get any repsonse either.
Its just straight up dead, if there is nothing I can do then oh well its my old phone anyways, would still be grateful for any help tho as my friend is in a hard situation rn.
Ty in advance to everyone trying to help.
Click to expand...
Click to collapse
two ideas come to mind, 1: a jig and 2: debrick image
jigs should still be a very viable option for situations like these, however might be fruitless and i cant remember if this phone has an expandable memory slot or not. I know they ditched a few things on the S6 that were like VGN "what were they thinking???" but cant recall if that was one of them