You been advised:
Any damage done during the process is not of my responsibility. If you use this ROM you are aware that you need to know the basics of ROM flashing and anything bad that comes out from it it's all on your procedure and hand to take care of.
Click to expand...
Click to collapse
Since the faulty and non-optimized stock rom from UMIDIGI, i've been looking everywhere for ROMs based in our device specs to get a better user experience.
And that lead me to this ROM. NOA.
NOA H10 is a device that is sold in Croatia and is produced by UMIDIGI. The rest is left for them to work on and until now I noticed that even though it is a 6.0 ROM it still is better than UMIDIGI 6.0 stock ROM.
Enough of this monologue and let's get straight to the procedure.
Pre-requisites:
- Flashtools - here (scroll down until you find the latest version)
- NOA H10 ROM file - Latest MM version, Latest Nougat
- SN Writter - here (scroll down until you find the latest version) - this one is to use in case that if by any chance you loose your IMEI's number (if data and calls dont work after flash)
- Little to none skills on flashing ROM's
Instructions: - Umidigi Z Pro
1. Extract the Flashtools package anywhere you want;
2. Extract the ROM package just anywhere you want too;
3. Open the Flashtools folder and open the flash_tool.exe;
4. At this point, press the button "choose" on "Scatter-loading File" and go to the folder where you extracted your ROM files. Select the "MT6797_Android_scatter.txt" file;
5. Press "Download", and with your device turned off, connect it to the PC;
6. The flashing process will start and check message box will appear as soon as it finishes.
7. All set and done. The initial language will be Croatian but I think you will not have problems searching for your language from the first drop box menu that will appear.
Instructions: - Umi Z: credits to @philipped346
NOA ROM FOR UMI Z
this version is for twrp but if you want install with spft , extract the system.img from the zip and replace in the stock noa rom
stock camera don't work but others work fine .
install the zip from twrp and reboot and after finish setup you can choise a camera apk and install it
noa rom for umi z https://www.androidfilehost.com/?fid=961840155545580225
exemples cameras
htc camera https://www.androidfilehost.com/?fid=673368273298961488
lenovo camera https://www.androidfilehost.com/?fid=889764386195905998
camera custom https://www.androidfilehost.com/?fid=889764386195914332
enjoyed
Click to expand...
Click to collapse
NOTES and BUG FIXES:
Leave your feedback here as well as any bugs found. I might or not be able to fix them but at least everyone will be aware of them.
If you whant to install TWRP, do so. But right after installing TWRP, on first boot, go directly to TWRP and apply Supersu or Magisk. This way will prevent bootloop as reported by @DocwatZ
ENJOY!
Some ROM screens:
Battery life proofs:
Any run down of the features, benefits, and how they differ? ?
calebash82 said:
Any run down of the features, benefits, and how they differ?
Click to expand...
Click to collapse
Every feature you had in UMIDIGI 6.0 you have in this one. Only slight differences. I will be posting later on stuff like battery graph's, antutu benchmark and if I find any bug I will report too. Just give me until tomorrow or so so that the battery stats can be created.
deviantor said:
Every feature you had in UMIDIGI 6.0 you have in this one. Only slight differences. I will be posting later on stuff like battery graph's, antutu benchmark and if I find any bug I will report too. Just give me until tomorrow or so so that the battery stats can be created.
Click to expand...
Click to collapse
I'm hoping more to see some Bluetooth improvements (fingers crossed) as the existing BT connectivity is atrocious. Do we know if it work OK with the Z Pro as well? ?
calebash82 said:
I'm hoping more to see some Bluetooth improvements (fingers crossed) as the existing BT connectivity is atrocious. Do we know if it work OK with the Z Pro as well?
Click to expand...
Click to collapse
Still haven't tested it yet. But will after work and I will inform you on that matter.
Screenshots added and dont mind the fault of signal on wifi and RIL. The signal at my workstation is a true facepalm.
Rom installed...
It's working on Umidigi Z Pro.
I installed TWRP and that works but after coming out of recovery it no longer wants to boot.
Will re-flash and and keep testing.
FYI Camera software looks like Umidigi version. It's shame because the Gemini Pro version looks way better in my opinion.
Also... NOA have http://noa-mobile.eu/element/h10le smartphone on Preorder. Possible that the Android 7.1.1 rom from this handset will work on Z Pro to.
Keep up the good work peeps. The Z Pro users will be happy one day :good:
DocwatZ said:
It's working on Umidigi Z Pro.
I installed TWRP and that works but after coming out of recovery it no longer wants to boot.
Will re-flash and and keep testing.
FYI Camera software looks like Umidigi version. It's shame because the Gemini Pro version looks way better in my opinion.
Also... NOA have http://noa-mobile.eu/element/h10le smartphone on Preorder. Possible that the Android 7.1.1 rom from this handset will work on Z Pro to.
Keep up the good work peeps. The Z Pro users will be happy one day :good:
Click to expand...
Click to collapse
If you havent managed to do it, try reflashing ROM with SPFT Tools. Do a first reboot on device and then apply TWRP. I have mine with TWRP and root without problem. Just did as I told you.
TWRP version?
deviantor said:
If you havent managed to do it, try reflashing ROM with SPFT Tools. Do a first reboot on device and then apply TWRP. I have mine with TWRP and root without problem. Just did as I told you.
Click to expand...
Click to collapse
Which version of TWRP are you using?
I've re-flashed the ROM a couple of times. Now TWRP won't install at all. I have tried a number of times with SP flash tool but it seems to revert to original recovery.
Tried TWRP_310_UMI_Z.V3.01_20170116
and TWRP_303_UMI_Z.V3.01_20170116
DocwatZ said:
Which version of TWRP are you using?
I've re-flashed the ROM a couple of times. Now TWRP won't install at all. I have tried a number of times with SP flash tool but it seems to revert to original recovery.
Tried TWRP_310_UMI_Z.V3.01_20170116
and TWRP_303_UMI_Z.V3.01_20170116
Click to expand...
Click to collapse
I used TWRP_310_UMI_Z.V3.01_20170116. I flashed the ROM, did the initial startup then shut the device and flashed twrp with the scatter file from here too.
quick update:
I had to reformat my device as I was palying with gemini pro camera files and when i tried to go back to NOA ones it force closed my app. So battery stats graphs will be updated tomorrow. I can advance that TWRP, Root and xposed is working well on this ROM. Camera quality is better too with this one (cant show comparison due to reformat of mobile and forgot to backup photos. Stay tuned!
hello, i have install 7.1.1 update after 6.0 stock umidigi. The real problem i have is the poor quality of the camera. I find it better when i use gemini pro rom 6.0 but the problem of lock screen forced me to return on umidigi rom. How is the focus of this rom for the camera ? The antutu score looks like wonderful ! is the phone better to use with Noa rom ?
---------- Post added at 02:55 PM ---------- Previous post was at 02:16 PM ----------
do you think, when the rom will be release, it's possible to install 7.1.1 gemini or 7.1.1 noa le on z pro ?
Nobody try to install lineage os umi z on z pro ? it's just a question
scroful said:
hello, i have install 7.1.1 update after 6.0 stock umidigi. The real problem i have is the poor quality of the camera. I find it better when i use gemini pro rom 6.0 but the problem of lock screen forced me to return on umidigi rom. How is the focus of this rom for the camera ? The antutu score looks like wonderful ! is the phone better to use with Noa rom ?
---------- Post added at 02:55 PM ---------- Previous post was at 02:16 PM ----------
do you think, when the rom will be release, it's possible to install 7.1.1 gemini or 7.1.1 noa le on z pro ?
Nobody try to install lineage os umi z on z pro ? it's just a question
Click to expand...
Click to collapse
Welcome scroful!
I'm aware of the 7.1.1 problems on the camera. With this ROM I made a test with Gemini Pro Camera and the camera from this ROM and despite I dont have the photos to proof I noticed that this NOA camera took photos a little bit better than Gemini. For now, everything is stable and Bluetooth works ok altough I need to do more tests as there was people complaining that UMIDIGI rom was unstable on bluetooth. Tomorrow I will feedback about this and battery. Just gonna let settle the ROM for today. Probably later I will create a Custom Rom of this with xposed, root and TWRP pre-installed.
So is there going to be Android 7.1 alternative?
Hi Guys,
I installed this NOA H10 rom yesterday, i see no different comparing to stock 6.0 umi z pro.
But the battery time is much better ! at the regular rom 6.0 or 7.1.1 i couldn't get passed 16 hours mixed, now i have 24 hours +-
no buggs found.
wielku said:
So is there going to be Android 7.1 alternative?
Click to expand...
Click to collapse
Probably. Only depends if NOA or Ulefone releases the files to flash.
Nark0tiX said:
Hi Guys,
I installed this NOA H10 rom yesterday, i see no different comparing to stock 6.0 umi z pro.
But the battery time is much better ! at the regular rom 6.0 or 7.1.1 i couldn't get passed 16 hours mixed, now i have 24 hours +-
no buggs found.
Click to expand...
Click to collapse
This is pure AOSP like UMIDIGI but has better performance and battery. I will post screens tomorrow about that.
deviantor said:
Probably. Only depends if NOA or Ulefone releases the files to flash.
This is pure AOSP like UMIDIGI but has better performance and battery. I will post screens tomorrow about that.
Click to expand...
Click to collapse
AOSP? what does that mean? anyway i love the battery time on this "NOA' rom! first time i made 2 days with just 1 charge thanks for the tip
---------- Post added at 08:26 PM ---------- Previous post was at 08:04 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry for the language it's in dutch. as you can see at the bottom of the battery app it says:
Actief (active), Standby (english alrdy), Gecombineerd (Combined/mixed)
This was the highest rating i could get today, now it's 22hours.. which is still almost 10 hours more than at regular umiz roms.
Nark0tiX said:
AOSP? what does that mean? anyway i love the battery time on this "NOA' rom! first time i made 2 days with just 1 charge thanks for the tip
---------- Post added at 08:26 PM ---------- Previous post was at 08:04 PM ----------
Sorry for the language it's in dutch. as you can see at the bottom of the battery app it says:
Actief (active), Standby (english alrdy), Gecombineerd (Combined/mixed)
This was the highest rating i could get today, now it's 22hours.. which is still almost 10 hours more than at regular umiz roms.
Click to expand...
Click to collapse
AOSP stands for:
Android
Open
Source
Project
It's the stockest and the true android face. Its like the base of any android. Almost.
deviantor said:
quick update:
I had to reformat my device as I was palying with gemini pro camera files and when i tried to go back to NOA ones it force closed my app. So battery stats graphs will be updated tomorrow. I can advance that TWRP, Root and xposed is working well on this ROM. Camera quality is better too with this one (cant show comparison due to reformat of mobile and forgot to backup photos. Stay tuned!
Click to expand...
Click to collapse
If it verify that camera is better than gemini pro it would be like and Nice. In this way i Will format for noa rom. Im waiting for your feedback and if you can put some picture it would be intetessing to compare. Have you try with footej camera ? If stock camera of noa is better than umidigi stock i think we Will have Nice results. Im waiting ?
camera is the same
Related
Upgrade LG G3 Stylus to Stock Lollipop Official
by:
Apriansyah Bintang
Alhamdulillah, those were the words in my mouth when it landed on LG G3 Stylus "in the middle of the fence." Finally "google potion" has come to us. Ok do not dwell upon this subject anymore! let's rock. But, there has to be understood first before upgrading this device to you who are still newbie :
A. COMMON QUESTIONS
Is the stock firmware of Lollipop are official? yes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If the firmware are official then why can't upgrade via On The Air (OTA) / automatic updates of device? not yet, because even though official however allocated for regional Malaysia, while Indonesia or other countries untill the author post this article currently there is no clarity when it will be given, only the sweet promises from the LG. CAUTION: now you can upgrade to Lollipoop via On The Air (OTA).
Is the manual upgrade as way below will shorten the life of our device ? Nope, there is no relation.
Is the manual upgrade as this will void the warranty ? of course, but do not worry just flash again to Kitkat then it will go back again to a virgin state.
Is the upgrade Indonesian Firmware must be via On The Air (OTA)? nope, you can flash it, and the link of Indonesian firmware is in the under point A. UPGRADE PREPARATION.
B. SPECIFIC QUESTIONS
Is using the firmware will be a significant improvement ? not entirely .
Is 3g signal is more stronger ? the author use “tri” and “simpati” cards. The signal of tri in kitkat for Bekasi (west java, Indonesia) area’s only 1-2 strips, but in lollipop at least 2 strips and 4 strips at maximum. While simpati in kitkat and lollipop both 5 strips.
If we use the Antutu Benchmark then what is the score? If the Kitkat ranging from 17,000 to 18,000 so if Lollipop minimal ranging from 19370-20447.
Does performance increased? I feel it is a litte bit increase.
Is the battery getting longer ? a little bit different with kitkat, it depends on usage.
Is interface (user interface ) to change ? not significant, may be only in screen lock, recent, navigation key, which changed to the style of Lollipop .
It will support USB On The Go ( OTG ) ? no, not yet.
Does the RAM increased ? nope, there is no change, but multitasking becomes better if the entire animations in our device turned off.
Does it affect internal memory becomes more space ? nope, even on the contrary, the Kitkat internal memory which is used for sytem amount 3.7GB but at Lollipop reach 4.21GB.
Is there an Indonesian language option ? Yeup, even the choice of languages becomes more choice.
Does using Indonesian regional firmware for non Indonesian regional will impact influence on the received signal ? i think it doesn't.
Does rooting the device must be? Nope, doesn't.
Does unroot the device must be? Nope, doesn't.
Would the device can be rooted ? Yes, only one methode for now, use king root version 4.0 : www.kingroot.net
Is this upgrade will delete internal memory ? yes, it will. Than backup first please.
Is this upgrade will delete external memory ? nope.
How lerge is the size of the firmware in a KDZ ? 893MB.
Is the pixel density will increase ? nope.
There Is bugs on Lollipop ? Yeup, GPS not working properly and there is no solution yet..
Is the result of photo more better ? a little bit increase about 5-10 %, a better result when the light is less when we using the kitkat with a flash lamp then the result becomes chaotic, ugly saturation, blur. But now it is litle bit better.
Compare the photo above is taken from the stock camera of LG G3 Stylus Kitkat when the light level is very lacking at 08:00 pm ; the left does taken using blits (flash lamp) while the right photo does not use blits.
Now compare the photos below was taken at 10:00pm with stock camera of LG G3 Stylus lollipop in the same condition; with a worse light at 10.00 pm, the left does taken using blits (flash lamp) while the right photo does not use flash lamp.
Does the input / output sound more better ? no changes.
The other Applcations does not change....
etc
TUTORIAL UPGRADE / UPDATE SOFTWARE
A. UPGRADE PREPARATION
The LG Driver must be installed, download here.
Download flashing tools here.
Download the Lolipop firmware, Malaysian Regional here or here and put it on the same folder with flashing tools.
Or download the Lollipop Indonesian Firmware : here and put it on the same folder with flashing tools.
B. HOW TO UPGRADE
Turn off the device.
Go into Download Mode/Firmware Update press volume up and plug the usb cable immediately.
Choose CSE mode not Normal Mode.
Than flash it with lollipop firmware that you've downloaded.
For those of you who are confused how to flash please look at this link or this for the Facebook Group and this for you an Indonesian.
Still Confused? look at this video on youtube.
Done, the device will reboot twice. Do not affraid it's normal.
Congratulation for you... do not forget Your Thumb please.
Please write the source when you copying to other blogs etc.
Thanks for Reading my Article.
Great!
Finally we have Lollipop! I've did this 2 days ago and the phone works perfect although i'm from Chile and the indonesian firmware runs correctly so
I only hope that some developer can find the way to enable recovery
Is not possible to root the phone yet?
works great on LG D693n
I have the single SIM model (D693n) from Mexico and the performance is very good, to me it seems to drain quicker the battery lollipop
---------- Post added at 02:29 AM ---------- Previous post was at 02:27 AM ----------
I have the single SIM model (D693n) from Mexico and the performance is very good, to me it seems to drain quicker the battery lollipop, just flashed yesterday
themonja said:
Finally we have Lollipop! I've did this 2 days ago and the phone works perfect although i'm from Chile and the indonesian firmware runs correctly so
I only hope that some developer can find the way to enable recovery
Is not possible to root the phone yet?
Click to expand...
Click to collapse
I've try many way to root it, but always fail. :crying: I hope some developer can find how to root it and to enable a custom recovery.
Your thumb please...
mckarty said:
I have the single SIM model (D693n) from Mexico and the performance is very good, to me it seems to drain quicker the battery lollipop
---------- Post added at 02:29 AM ---------- Previous post was at 02:27 AM ----------
I have the single SIM model (D693n) from Mexico and the performance is very good, to me it seems to drain quicker the battery lollipop, just flashed yesterday
Click to expand...
Click to collapse
callibrate it first and than judge it.
thumb please :good:
themonja said:
Finally we have Lollipop! I've did this 2 days ago and the phone works perfect although i'm from Chile and the indonesian firmware runs correctly so
I only hope that some developer can find the way to enable recovery
Is not possible to root the phone yet?
Click to expand...
Click to collapse
Now is possible to root the lollipop, use king root version 4.0 : www.kingroot.net
Thanks for your helpful information.
My GPS is not working after I update to Android Lollipop! Is it only with me or it's happening with someone else? What can I do?
Thanks!
Does this works with a G3 Stylus model D693 ?
Just to answer my own question, I flashed the ROM and is working perfect.
themonja said:
Finally we have Lollipop! I've did this 2 days ago and the phone works perfect although i'm from Chile and the indonesian firmware runs correctly so
I only hope that some developer can find the way to enable recovery
Is not possible to root the phone yet?
Click to expand...
Click to collapse
renatobring said:
My GPS is not working after I update to Android Lollipop! Is it only with me or it's happening with someone else? What can I do?
Thanks!
Click to expand...
Click to collapse
Yeup, GPS not working properly and there is no solution yet.
It's working! but we can't use xposed because no custom recovery ;_;
evertonjcorreia said:
It's working! but we can't use xposed because no custom recovery ;_;
Click to expand...
Click to collapse
xpossed for lollipop has realesed but must flashing from cwm. The problem is we have no cwm yet.
thumb please...
Do we have a solution for the GPS on Lollipop yet? Will LG update this firmware?
Thanku very very much
Sent from my LG-D690 using XDA Free mobile app
thanks worked on my g3 stylus (d690n) gives the same error above and my gps works.
anyone sucessfully rooted it?
lg one click root failed for me :'(
Hxnter said:
I was with the Kingroot (the link is on the own post), then I flashed the rom again and it's not working anymore. Funny.
I got root with iRoot too, but even the own iRoot apps couldn't got root permissions, which means it couldn't gave permissions to any other app too.
I guess that even if you get, you won't be able to update the su binaries easily, so you will have to get used with the Chinese apps.
Gps is working fine to me either, seems even faster than before.
Click to expand...
Click to collapse
iroot worked fine after the 3rd try
the only thing remaining is the custom recovery to install xposed
i dont know, i was just about to try
---------- Post added at 01:43 PM ---------- Previous post was at 01:08 PM ----------
now i've noticed that i lost the nfc funcion of my device. i think this was the n from d690n.
anyone knows how to add it back?
apriansyahbintang said:
Yeup, GPS not working properly and there is no solution yet.
Click to expand...
Click to collapse
My GPS works Great after update to Lollipop, and i have root in my device. Greetings from México.
There is already TWRP OR CWM for LG stylus g3 D690 5.0.2?!
Do you have the LG D393n?
Do you have the LG D393n?
---------- Post added at 02:24 PM ---------- Previous post was at 02:21 PM ----------
Dargod92 said:
My GPS works Great after update to Lollipop, and i have root in my device. Greetings from México.
Click to expand...
Click to collapse
Do you have the LG D693n ?
ColorOS 3.0 Beta for R7 (Plus)
Chinese developers have released the new version of ColorOS for:
R7sm
R7Plusm
R7Plus
R7sPlus
It is based on Lollipop 5.1.1.
Original Chinese thread: http://bbs.coloros.com/thread-234299-1-1.html
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'd say it resembles the Xiaomi's MIUI...
I have been trying to deodex the ROM, especially to get the OppoCamera apk out of it.
I haven't succeeded yet, but I figured somebody might want to test the ROM or try it by himself.
You can ColorOS 3.0 camera app here: http://bit.ly/cos3cam
But remember, it does not have to work for you as it may be dependent on ColorOS 3.0 framework.
And if you try it on any other device than R7 Plus, well, it will almost definitely not work for you, so don't post here about how it doesn't work for you
What is new:
- mostly new UI (camera, desktop...)
- faster interactions
- new Camera
- etc...
I HAVE NOT TESTED THIS - THIS IS ONLY REUPLOAD.
Everything you do is on your own risk!
Download:
R7sM:
https://mega.nz/#!tUEVhJAY!e9HX0Krpe6OdBS2fNDjZDhCsnrmCcn3u21fHCiFY88I
R7PlusM:
https://mega.nz/#!wU0nkbSC!Dt3cRMDonSndPub0V4Iu3TkCOmFx-eOWc-id5-0qAx4
R7Plus:
https://mega.nz/#!JZlD1LCJ!_ipybMFSemCWoyN33FtJ8equ6yrj2-pgAf8IQ7qPHWE
R7sPlus:
https://mega.nz/#!tNFW2YIT!biUEhc70QY19l9FYh8xUf42zA2SEQwPWCuvsg7EtJ1Q
R7s, R7t:
They are working on it - more info here.
Installation:
Read this (about missing fastboot on Oppo devices - if you are on a ROM with missing fastboot, you might need to downgrade to get it back).
Download the selected ZIP to your phone and flash it as usual...
Make sure you are using the right ZIP file on the right device!!!!
More threads about ColorOS 3.0 (use Chrome with auto-translation or just put the urls to translate.google.com):
http://bbs.coloros.com/r7-178016-1-1.html
http://bbs.coloros.com/r7-175839-1-6.html
http://bbs.coloros.com/r7-176262-1-1.html
http://bbs.coloros.com/r7-176130-1-1.html
Don't forget to let us know how it went, how you like it, etc...
It seems to be for the 'M' variant of R7 Plus, so I guess it will only work there. Installing on a 'F' variant probably will transform your phone on a beautiful brick...
Nothing personal against MIUI, I've installed it several times, right now I don't like it due to the "necessity" to have another account rather than Google's one.
elsuzio said:
It seems to be for the 'M' variant of R7 Plus, so I guess it will only work there. Installing on a 'F' variant probably will transform your phone on a beautiful brick...
Nothing personal against MIUI, I've installed it several times, right now I don't like it due to the "necessity" to have another account rather than Google's one.
Click to expand...
Click to collapse
What do you mean by you've installed MIUI ROM .. ?!! Is there a ROM for our device .. ?!! If yes please share it with us.
By the way, ajeeshcr20 is working on porting the MIUI 7 ROM based on the 5.1 or 6.0, so we are waiting him to upload the beautiful smooth ROM.
Thanks.
Mulham82 said:
What do you mean by you've installed MIUI ROM .. ?!! Is there a ROM for our device .. ?!! If yes please share it with us.
By the way, ajeeshcr20 is working on porting the MIUI 7 ROM based on the 5.1 or 6.0, so we are waiting him to upload the beautiful smooth ROM.
Thanks.
Click to expand...
Click to collapse
Sorry, I meant with other phones, not with R7 plus.
I have added the ColorOS 3.0 camera app to the first post.
If you have R7 Plus, try it out and let me/us know.
Not working
The camera is not working but I believe it's because I am in CM13 . Could you tell me if the quality of the video is improve more than 10 fps in low light condition?! French user thk you !
Doesn't install in ColorOS.
any hopes for oppo r7 plusf?
awais_666 said:
any hopes for oppo r7 plusf?
Click to expand...
Click to collapse
Maybe it already works on R7 PlusF, maybe it will not brick it as @elsuzio said.
And maybe it will...
If you know something about fastboot, recovery, flashing,... and you are sure you can recover the device in case of a bootloop/brick, go ahead and try it out...
And don't forget to let us know how it went...
But if you don't know what I'm talking about, I recommend you not to try your luck
elsuzio said:
Doesn't install in ColorOS.
Click to expand...
Click to collapse
I see...
It would probably require root and Lucky Patcher/Xposed patch to the android core...
Or force uninstalling of the original OppoCamera (either via a custom recovery - TWRP, or Titanium Backup - again, root required)
If you wish to try, you will have to do your own research (the keywords were put above). Elseway, let's consider the camera app uninstallable..
I have already tryed and without root but the same way to upgrade as well and also through twrp both didnt work phone didnt brick
awais_666 said:
any hopes for oppo r7 plusf?
Click to expand...
Click to collapse
If I had to guess, I would say this rom is for the mediatek variant of the phone. Qualcomm, even if it's present on some models of the M variant, it's used for traveling abroad (if I'm not mistaken), so it makes sense the rom is only for mediatek. Anyway, I'm still a tad confused about the different versions of this phone...
awais_666 said:
I have already tryed and without root but the same way to upgrade as well and also through twrp both didnt work phone didnt brick
Click to expand...
Click to collapse
I see, it is probably caused by the first line in
ColorOS V3.0_20160129_Beta.zip\META-INF\com\google\android\updater-script
You'd have to modify that file to force the flash...
I am not that much expert so i should wait for it
Color OS 3.0 Camera
andriman said:
ColorOS 3.0 Beta for R7 PlusM
Chinese developers have released the new version of ColorOS for R7 PlusM.
It is based on Lollipop 5.1.1.
Original Chinese thread: http://bbs.coloros.com/r7-199493-1-1.html
Screenshots:
I'd say it resembles the Xiaomi's MIUI...
I have been trying to deodex the ROM, especially to get the OppoCamera apk out of it.
I haven't succeeded yet, but I figured somebody might want to test the ROM or try it by himself.
You can ColorOS 3.0 camera app here: http://bit.ly/cos3cam
But remember, it does not have to work for you as it may be dependent on ColorOS 3.0 framework.
And if you try it on any other device than R7 Plus, well, it will almost definitely not work for you, so don't post here about how it doesn't work for you
What is new:
- mostly new UI (camera, desktop...)
- faster interactions
- new Camera
- etc...
I HAVE NOT TESTED THIS - THIS IS ONLY REUPLOAD.
Everything you do is on your own risk!
Download:
https://mega.nz/#!YYdlTAJZ!VL9I5szmPLrLU7IUovvuKwqTtNXEV3MmN4TbUU31M74
http://www.uschovna.cz/zasilka/HJU2A367RBEERR4W-J85/
{ md5: 067a2d051cfcaaf02c4a5d2dd102d7a7 }
Installation:
Download it to your phone and flash it as usual...
More threads about ColorOS 3.0 (use Chrome with auto-translation or just put the urls to translate.google.com):
http://bbs.coloros.com/r7-178016-1-1.html
http://bbs.coloros.com/r7-175839-1-6.html
http://bbs.coloros.com/r7-176262-1-1.html
http://bbs.coloros.com/r7-176130-1-1.html
Don't forget to let us know how it went, how you like it, etc...
Click to expand...
Click to collapse
Is there any link for its new plug ins Pl. ?
andriman said:
I see, it is probably caused by the first line in
ColorOS V3.0_20160129_Beta.zip\META-INF\com\google\android\updater-script
You'd have to modify that file to force the flash...
Click to expand...
Click to collapse
hey buddy i tryed to modify that updater-script file it didnt work do you know the code for it
awais_666 said:
hey buddy i tryed to modify that updater-script file it didnt work do you know the code for it
Click to expand...
Click to collapse
I did the modifications (editing the updater-script to change the model name, and removes the bootloader/radio/nvflash/other unneeded images so that brick risks are avoided) and it worked, rom boots fine and everything is working (mobile network, wifi, fingerprint, camera, etc).
I don't like the rom though, going back to CM. Here's a link that can flash on R7Plusf if anyone is interested: https://mega.nz/#!39QzkaJQ!00y_WonQqaPnc4yAYTMh1t7atvlrCE6nx_kmk5uwqbA (flash it via TWRP)
Beware though, there's no gapps in there (you might want to flash them too) and the rom is english/chinese only. There are chinese apps too (not a lot of them) and I found the keyboard awful to use.
Is it possible flash to R7plusf?
Demazda said:
I did the modifications (editing the updater-script to change the model name, and removes the bootloader/radio/nvflash/other unneeded images so that brick risks are avoided) and it worked, rom boots fine and everything is working (mobile network, wifi, fingerprint, camera, etc).
I don't like the rom though, going back to CM. Here's a link that can flash on R7Plusf if anyone is interested: https://mega.nz/#!39QzkaJQ!00y_WonQqaPnc4yAYTMh1t7atvlrCE6nx_kmk5uwqbA (flash it via TWRP)
Beware though, there's no gapps in there (you might want to flash them too) and the rom is english/chinese only. There are chinese apps too (not a lot of them) and I found the keyboard awful to use.
Click to expand...
Click to collapse
thank you buddy i had already ordered xiaomi redmi note 3 but ill give it a try
awais_666 said:
thank you buddy i had already ordered xiaomi redmi note 3 but ill give it a try
Click to expand...
Click to collapse
Can you post some screenshot? Thanks
shadow25 said:
Can you post some screenshot? Thanks
Click to expand...
Click to collapse
I installed it it went pretty good but I flashed gapps which did not show up and after i tryed to install play store but couldnt do it as most of things you find are in chinese even warnings were coming in chinese so i couldn't bear it and had to delete couldn't take screenshot but they are same as the main post as that converts phone to R7plusM try it see how you go
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just want to share this rom.. This rom has small footprint with 851mb in size. This work from yanzihan for d838..s..k..L......download zip put it on internal drive if your using philz recovery.. . With small status and navigation bar compared to tizen 7.1
This is stable rom for me.. Flash on from any lolipop/kitkat based rom.. firstly Wipe dalvic data cache.. or what i did was delete all in advance section twrp except sd card which the rom is placed (all my roms flashing are place on sd cards) ...now flash xenuis9 lolipop baseband https://yadi.sk/d/_hz4jdQhpheNn first then flash yanzihan rom... installer is in chinese so choose the right model and BE VERY Careful choosing your right model on aroma installer.
This has no gapps just flash gapps after install. after installing gapps remember to do hard reset using twrp always.
G4 ux rom password : vrih
http://pan.baidu.com/s/1o63nuiu
or
google drive : https://drive.google.com/drive/folders/0B_K8NT2_tbnfWGNNMU9fNHVMZE0?usp=sharing
mega drive : https://mega.nz/#!aQs1kLrQ!HHtz_MX38ZWlNHwyeHHw7YRzwBrGintepfHYwypII8M
gapps Use PICO http://opengapps.org
i will not be responsible if you dont have LTE.. you have to configure it. dial 5457#*350# to configure on hidden menu
Note: just use google translate.. i only registered phone.. no need to download baidu app.
updated with mega link.
ive been using it for a week now i can say stanby time is awesome with limited bloatware..
Usage experience : 25 hours standby time with 5:46 Sot
i can get 4:30 to 5:30 sot with new rom..
maybe because its not so bloated at all.
This rom is already rooted with super su.
To install xpose just freeze Lg cover and your good to go using xposed for lolipop only.
Kindly hit thanks if you like it.
Updated how to install properly
pato2015 said:
Just want to share this rom.. This rom has small footprint with 851mb in size. This work from yanzihan for d838..s..k..L..
This is based on lg g4 apps lolipop based. With small status and navigation bar compared to tizen 7.1
This is stable rom for me.. Flash on from any lolipop/kitkat based rom.. Wipe dalvic data cache.. install zip.. choose right model BE Careful choosing your right model.
This has no gapps just flash gapps after install.
G4 ux rom password : vrih http://pan.baidu.com/s/1o63nuiu
gapps http://opengapps.org
Note: just use google translate.. i only registered phone.. no need to download baidu app.
Kindly hit thanks if you like it.
Click to expand...
Click to collapse
Can you upload rom file on other site as i cant download from this site right now. Thanks
Sent from my LG-F350L using XDA Free mobile app
pato2015 said:
Just want to share this rom.. This rom has small footprint with 851mb in size. This work from yanzihan for d838..s..k..L..
This is based on lg g4 apps lolipop based. With small status and navigation bar compared to tizen 7.1
This is stable rom for me.. Flash on from any lolipop/kitkat based rom.. Wipe dalvic data cache.. install zip.. choose right model BE Careful choosing your right model.
This has no gapps just flash gapps after install.
G4 ux rom password : vrih http://pan.baidu.com/s/1o63nuiu
gapps http://opengapps.org
Note: just use google translate.. i only registered phone.. no need to download baidu app.
Kindly hit thanks if you like it.
Click to expand...
Click to collapse
Thanks a lot I'm loving this rom !!!!
Please upload rom to drive/mega
Sent from my LG-D838 using Tapatalk
nicklite97 said:
Thanks a lot I'm loving this rom !!!!
Click to expand...
Click to collapse
just hit tumbs up thanks..on my post
coavasic said:
Please upload rom to drive/mega
Sent from my LG-D838 using Tapatalk
Click to expand...
Click to collapse
sorry my net sucks imo... just be patience.. i tried downloading it on 3rd time it was successful
MirzaAwais said:
Can you upload rom file on other site as i cant download from this site right now. Thanks
Sent from my LG-F350L using XDA Free mobile app
Click to expand...
Click to collapse
ill drop by at my office later and upload on google..
ill upload share using google drive tmrow....
Please re insert Viper4android. Thanks
Hi. Thanks for sharing! How is this rom compare to Tizen 7.1 in performance, battery life and look?
---------- Post added at 11:07 AM ---------- Previous post was at 11:03 AM ----------
BTW found this on the web: http://pan.baidu.com/share/link?sha...%A2%93%E6%B6%B5%E7%BE%8E%E5%A5%B3ROM%E5%8C%85
Miui6 and 7? :cyclops:
nachopre said:
Hi. Thanks for sharing! How is this rom compare to Tizen 7.1 in performance, battery life and look?
---------- Post added at 11:07 AM ---------- Previous post was at 11:03 AM ----------
BTW found this on the web: http://pan.baidu.com/share/link?sha...%A2%93%E6%B6%B5%E7%BE%8E%E5%A5%B3ROM%E5%8C%85
Miui6 and 7? :cyclops:
Click to expand...
Click to collapse
in terms of battery life i think this is more effiecient since its a slim rom compared to tizen.. regarding looks its more beautiful since its already ported with lg g4 looks.. on tizen to get a lgg4 looks app you need to flash additional lgg4 files.. Since i use xposed this rom is stable for xposed... when on tizen and if i install lgg4 additional apps.. system setting keeps crashing.
Regarding mui 7.. 6..i heard one guys got bootloop from it.. if your strong enough you can jump in and tell us if it works. hhehe
pato2015 said:
in terms of battery life i think this is more effiecient since its a slim rom compared to tizen.. regarding looks its more beautiful since its already ported with lg g4 looks.. on tizen to get a lgg4 looks app you need to flash additional lgg4 files.. Since i use xposed this rom is stable for xposed... when tizen with lgg4 additional apps.. settinga keeps crashing.
Click to expand...
Click to collapse
I am not brave enough...jeje
Ok. For Tizen 7.1 and additional G4 apps to avoid FC's you must flash and start up fresh TIzen 7.1 And once you have start at least once, then enter again in recovery and then flash G4 add-on. Otherwise FC's in settings.
But you say that this one is more beautiful than Tizen 7.1 + G4 add-on?
I guess Quickmemo, and rest of default LG apps are included right?
Can you check if you have FlashLight Toggle in quick settings?
I have just purchased a second hand LG G Pro 2 and i am preparing my 1st Rom to install on it.
I am having problems to download the rom(network falls). Can you share it?
Regards.
nachopre said:
I am not brave enough...jeje
Ok. For Tizen 7.1 and additional G4 apps to avoid FC's you must flash and start up fresh TIzen 7.1 And once you have start at least once, then enter again in recovery and then flash G4 add-on. Otherwise FC's in settings.
But you say that this one is more beautiful than Tizen 7.1 + G4 add-on?
I guess Quickmemo, and rest of default LG apps are included right?
Can you check if you have FlashLight Toggle in quick settings?
I have just purchased a second hand LG G Pro 2 and i am preparing my 1st Rom to install on it.
I am having problems to download the rom(network falls). Can you share it?
Regards.
Click to expand...
Click to collapse
im on having FC on system settings when xposed installed.. if i delete exposed then all working well on tizen 7.1... on g4 ux rom it has no flashlight but theres unlimted dual window.. .by the way heres the list of g4 ux features
tmrow ill try to upload it
I have noticed the smart notice is not working for displaying cards. It will just say welcome to smart notice. Also the lockscreen weather animation is not working
nicklite97 said:
I have noticed the smart notice is not working for displaying cards. It will just say welcome to smart notice. Also the lockscreen weather animtion is not working
Click to expand...
Click to collapse
ive heard smart notice is working on one of the guy on another forum.. im on xgel google now launcher..
regarding lockscreen weather animation its working when i first installed.. but i freeze it now in exchange for xposed.
Here you are!: https://mega.nz/#!aQs1kLrQ!HHtz_MX38ZWlNHwyeHHw7YRzwBrGintepfHYwypII8M
nachopre said:
Here you are!: https://mega.nz/#!aQs1kLrQ!HHtz_MX38ZWlNHwyeHHw7YRzwBrGintepfHYwypII8M
Click to expand...
Click to collapse
Bundle of thanks for sharing it on mega. Please share your reviews about this romantic if you have installed it earlier. Thanks man
Sent from my LG-D838 using XDA Free mobile app
mega download link on first page too... have fun!
pato2015 said:
ive heard smart notice is working on one of the guy on another forum.. im on xgel google now launcher..
regarding lockscreen weather animation its working when i first installed.. but i freeze it now in exchange for xposed.
Click to expand...
Click to collapse
is there a way to make smart notice work?
pato2015 said:
Just want to share this rom.. This rom has small footprint with 851mb in size. This work from yanzihan for d838..s..k..L..
This is based on lg g4 apps lolipop based. With small status and navigation bar compared to tizen 7.1
This is stable rom for me.. Flash on from any lolipop/kitkat based rom.. Wipe dalvic data cache.. install zip.. choose right model BE Careful choosing your right model.
This has no gapps just flash gapps after install.
G4 ux rom password : vrih
http://pan.baidu.com/s/1o63nuiu
or
mega drive : https://mega.nz/#!aQs1kLrQ!HHtz_MX38ZWlNHwyeHHw7YRzwBrGintepfHYwypII8M
gapps http://opengapps.org
Note: just use google translate.. i only registered phone.. no need to download baidu app.
sorry i cant re upload it since i dont have a comp now.. if anyone can upload it and credit me it would be awesome
ive been using it for a week now i can say stanby time is awesome with limited bloatware..
i can get 4:30 to 5:30 sot with new rom..
maybe because its not so bloated at all.
Kindly hit thanks if you like it.
Click to expand...
Click to collapse
You forgot to write that Aroma installer is in Chinese and for anyone who does not understand Chinese, it is impossible to choose right model for install.
Update: F1f is now official in LineageOS 16.0.
To install*: https://wiki.lineageos.org/devices/f1f/install
I'm installing the first build to test, nice!
Hello,
Since @highwaystar_ru pushed reviews that have since been merged to the LineageOS repositories, I built a few releases of LineageOS 16.0.
Credits go to: @highwaystar_ru, @uberlaggydarwin and I must be missing a lot of devs
Here is a rom I'm using since one week as my only phone, that I consider stable (this is debatable). At this time, here are the bugs I noticied (nothing extraordinary for LineageOS or Spectrum users):
camera has the beauty effect engaged (****ty portraits)
GNSS assistance doesn't seem to work (first fix can take more than one minute)
sound output on the jack can saturate
battery readings are off
no VoLTE support (not tested)
This first stable build is coming from the code in the repos on tuesday jan 29th with only one patch: Allow webview_zygote to read /dev/ion
Download link: lineage-16.0-20190129-UNOFFICIAL-f1f.zip on MEGA (556 MB)
kdd998 said:
Hello,
Since @highwaystar_ru pushed reviews that have since been merged to the LineageOS repositories, I built a few releases of LineageOS 16.0.
Credits go to: @highwaystar_ru, @uberlaggydarwin and I must be missing a lot of devs
Here is a rom I'm using since one week as my only phone, that I consider stable (this is debatable). At this time, here are the bugs I noticied (nothing extraordinary for LineageOS or Spectrum users):
camera has the beauty effect engaged (****ty portraits)
GNSS assistance doesn't seem to work (first fix can take more than one minute)
sound output on the jack can saturate
battery readings are off
no VoLTE support (not tested)
This first stable build is coming from the code in the repos on tuesday jan 29th with only one patch: Allow webview_zygote to read /dev/ion
Download link: lineage-16.0-20190129-UNOFFICIAL-f1f.zip on MEGA (556 MB)
Click to expand...
Click to collapse
Good Work @kdd998 , To fix earphone sound issue (and improve some other sound quality) try flashing attached zip. If it works replace the acdb cal files in device_f1f_audio_acdbdata_ with the ones in this zip. It has worked with all older versions of android.
I also find that camera and LTE (band28 700mhz specifically) is better when using colourOs bootloader and firmware. It is 1 defconfig change and a few changes in BoardConfig.mk to build boot.img for colourOs base. I have only tested this on marshmallow builds but I think it shoud work. Let me know if you want to test it and I'll send you the changes. You only need to build the boot.img then flash clourOs bootloader,firmware,twrp and the boot.img to test it.
kdd998 said:
Hello,
Since @highwaystar_ru pushed reviews that have since been merged to the LineageOS repositories, I built a few releases of LineageOS 16.0.
Credits go to: @highwaystar_ru, @uberlaggydarwin and I must be missing a lot of devs
Here is a rom I'm using since one week as my only phone, that I consider stable (this is debatable). At this time, here are the bugs I noticied (nothing extraordinary for LineageOS or Spectrum users):
camera has the beauty effect engaged (****ty portraits)
GNSS assistance doesn't seem to work (first fix can take more than one minute)
sound output on the jack can saturate
battery readings are off
no VoLTE support (not tested)
This first stable build is coming from the code in the repos on tuesday jan 29th with only one patch: Allow webview_zygote to read /dev/ion
Download link: lineage-16.0-20190129-UNOFFICIAL-f1f.zip on MEGA (556 MB)
Click to expand...
Click to collapse
You are the man!
I just installed this new ROM and it is pretty stable!
Great job!
And one question only, how about the battery incorrect reading on 8.0?
Does it okay in this new ROM now?
Thanks !
(BTW, unbelievable we got Android 9.0 for our F1F, I thought Android 8 will be the end of our device, what a surprise in new year, thanks)
keep up the good work ! really appreciate you guys!!
---------- Post added at 03:24 PM ---------- Previous post was at 02:59 PM ----------
battery readings are off ? what does this mean?
Does it have battery status bug like the previous version?
Tanvir/ said:
keep up the good work ! really appreciate you guys!!
---------- Post added at 03:24 PM ---------- Previous post was at 02:59 PM ----------
battery readings are off ? what does this mean?
Does it have battery status bug like the previous version?
Click to expand...
Click to collapse
I think so, after the first full charged, the reading still incorrect and drop fast as previous version, except this, everything is running smoothly!
It's a great ROM!
r30857 said:
I think so, after the first full charged, the reading still incorrect and drop fast as previous version, except this, everything is running smoothly!
It's a great ROM!
Click to expand...
Click to collapse
After installing ROM this, the gyroscope doesn't work. how to fix it?
Battery drain same lineage 15.0
i really wanna try this rom out but this phone is my main device and battery stats is pretty important for me ?
Tanvir/ said:
i really wanna try this rom out but this phone is my main device and battery stats is pretty important for me
Click to expand...
Click to collapse
time is longer than lineage 15.0. but still running out of battery and the camera is too bad
MiniBlu said:
Good Work @kdd998 , To fix earphone sound issue (and improve some other sound quality) try flashing attached zip. If it works replace the acdb cal files in device_f1f_audio_acdbdata_ with the ones in this zip. It has worked with all older versions of android.
I also find that camera and LTE (band28 700mhz specifically) is better when using colourOs bootloader and firmware. It is 1 defconfig change and a few changes in BoardConfig.mk to build boot.img for colourOs base. I have only tested this on marshmallow builds but I think it shoud work. Let me know if you want to test it and I'll send you the changes. You only need to build the boot.img then flash clourOs bootloader,firmware,twrp and the boot.img to test it.
Click to expand...
Click to collapse
Thanks for all those precious infos. I'll try this when I find the time. And now is not a good time, I just had a third child and every sleep hours are precious
kdd998 said:
Thanks for all those precious infos. I'll try this when I find the time. And now is not a good time, I just had a third child and every sleep hours are precious
Click to expand...
Click to collapse
Congratulations, boss!
kdd998 said:
Hello,
Since @highwaystar_ru pushed reviews that have since been merged to the LineageOS repositories, I built a few releases of LineageOS 16.0.
Credits go to: @highwaystar_ru, @uberlaggydarwin and I must be missing a lot of devs
Here is a rom I'm using since one week as my only phone, that I consider stable (this is debatable). At this time, here are the bugs I noticied (nothing extraordinary for LineageOS or Spectrum users):
camera has the beauty effect engaged (****ty portraits)
GNSS assistance doesn't seem to work (first fix can take more than one minute)
sound output on the jack can saturate
battery readings are off
no VoLTE support (not tested)
This first stable build is coming from the code in the repos on tuesday jan 29th with only one patch: Allow webview_zygote to read /dev/ion
Download link: lineage-16.0-20190129-UNOFFICIAL-f1f.zip on MEGA (556 MB)
Click to expand...
Click to collapse
thanks a lot man i think uninstalling the audiofx and installing musicfx fixes the audio problem and install viper4android thats how i fixed the issue on the oreo rom
u can find the zip file which uninstalls audiofx and installs musicfx from here : https://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
from this flash the MusicFX Installer and AudioFX Remover.zip and then install viper4android from magisk
kdd998 said:
Thanks for all those precious infos. I'll try this when I find the time. And now is not a good time, I just had a third child and every sleep hours are precious
Click to expand...
Click to collapse
congrats
If you guys want slight better battery backup use these modules in magisk.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit 1:
Tanvir/ said:
If you guys want slight better battery backup use these modules in magisk.
Click to expand...
Click to collapse
Does it fix the wrong battery info prob?
thisbearisdrunk said:
Does it fix the wrong battery info prob?
Click to expand...
Click to collapse
It kinda does but not really
The battery percentage seems to drop less often
Try it out yourself and post a feedback
??
Tanvir/ said:
It kinda does but not really
The battery percentage seems to drop less often
Try it out yourself and post a feedback
Click to expand...
Click to collapse
I could not install any module, although I successfully installed magisk
Phucan2017 said:
I could not install any module, although I successfully installed magisk
Click to expand...
Click to collapse
Same here, no matter install the module under magisk or recovery.
Had tried to mount system before install, but still in same!
thisbearisdrunk said:
Does it fix the wrong battery info prob?
Click to expand...
Click to collapse
r30857 said:
Same here, no matter install the module under magisk or recovery.
Had tried to mount system before install, but still in same!
Click to expand...
Click to collapse
Guys check magisk manger is installed in internal or sd
If it's installed in external move it back to internal
Tanvir/ said:
Guys check magisk manger is installed in internal or sd
If it's installed in external move it back to internal
Click to expand...
Click to collapse
I m having the same issue and its installed in internal
but not able to install any modules
i googled about this problem and they many said the prob occurred because of f2fs format of storage and they told to flash f2fs work around zip file
i tried flashing it but i got an error saying the file is not for your storage type
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crDroid is designed to improve the performance, reliability and customizability of stock Android
Whats works:
Booting
Audio
Graphics
RIL (calls, sms, mobile data)
Wi-Fi
Bluetooth
GPS, GLONASS
FM Radio
Sensors
Camera
Video recording
Screen cast
Offline charging
SELinux (enforcing)
Tell me, if something does not work.
Don't ask about VoLTE ang OTG - this things will NOT work!
Installation
Flash latest recovery (if needed)
Reboot to recovery
Wipe /cache and /data
Flash the rom
Flash Gapps (ARM, Android 10, pico or nano)
Flash Magisk (also if needed)
Reboot to ROM
Download ROM: https://drive.google.com/drive/folders/1tZhufnysXJSSGBxfW0AFxPBgW5U6anXS?usp=sharing
Gapps: https://opengapps.org/ (ARM, Android 10, pico or nano)
Source code
Device tree: https://github.com/acroreiser/android_device_lenovo_a6000
Kernel tree: https://github.com/acroreiser/android_kernel_lenovo_a6000
Vendor tree: https://github.com/acroreiser/android_vendor_lenovo_a6000
Credits to:
dev_harsh1998
SkepticOne
Nitrogradient
IvanHephaestus
Our Telegram group: Lenovo A6000/Plus Community Discussions
XDA:DevDB Information
crDroid 6.7, ROM for the Lenovo A6000/Plus
Contributors
A$teroid
Source Code: https://github.com/acroreiser
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Hex Firmware Patch
Based On: LineageOS
Version Information
Status: Stable
Created 2020-06-22
Last Updated 2020-07-01
* reserved for changelogs *
first thank you for helping our old device to get another Rom with android 10
The logo of this Rom is really Majestic
it represents an Egyptian God > Eye of Horus
best rom for lenovo a6000 plus till now...
everything is working and runs buttery smooth..
no bugs.....
battery backup is great and many new andriod 10 features plus custom feature pack......
awalsnake said:
best rom for lenovo a6000 plus till now...
everything is working and runs buttery smooth..
no bugs.....
battery backup is great and many new andriod 10 features plus custom feature pack......
Click to expand...
Click to collapse
Does this rom had overheat issue? This is because i use crdroid android 9 before and it had overheat issue.
what is the problem with overheating? There are no problems. There is only normal working heat if you have been using a heavy load application for a long time.
There is a problem i am facing... when i try to convert my sdcard as an internal memory it converts sometimes or sometime it wont but after converting one or two restart then again sdcard forget or corrupted this is a huge issue for me and one other thing this rom can't do offline charging it's only shows that it's charging but it's not actually charging!
awalsnake said:
best rom for lenovo a6000 plus till now...
everything is working and runs buttery smooth..
no bugs.....
battery backup is great and many new andriod 10 features plus custom feature pack......
Click to expand...
Click to collapse
Are you sure no bugs?
Have you try with your sdcard? Because if you try to convert your sdcard as an internal memory then you will find out there is a huge bug on there!
-ARiCK- said:
There is a problem i am facing... when i try to convert my sdcard as an internal memory it converts sometimes or sometime it wont but after converting one or two restart then again sdcard forget or corrupted this is a huge issue for me and one other thing this rom can't do offline charging it's only shows that it's charging but it's not actually charging!
Click to expand...
Click to collapse
Regarding a non-working charging device in the off state. It is not true. This feature works. If you have a problem with this, it means that something is wrong with the charger or it is not original.
Charlestai1225 said:
Does this rom had overheat issue? This is because i use crdroid android 9 before and it had overheat issue.
Click to expand...
Click to collapse
i haven't encounter any issue like that...
---------- Post added at 12:06 PM ---------- Previous post was at 12:02 PM ----------
-ARiCK- said:
Are you sure no bugs?
Have you try with your sdcard? Because if you try to convert your sdcard as an internal memory then you will find out there is a huge bug on there!
Click to expand...
Click to collapse
i haven't encounter this issue either ..
there is one bug that i have face is the video playback in youtube is laggy when u watch videos in 720p or plus..
and also in messenger app.
---------- Post added at 12:08 PM ---------- Previous post was at 12:06 PM ----------
-ARiCK- said:
Are you sure no bugs?
Have you try with your sdcard? Because if you try to convert your sdcard as an internal memory then you will find out there is a huge bug on there!
Click to expand...
Click to collapse
i haven't encounter this issue either ..
there is one bug that i have face is the video playback in youtube is laggy when u watch videos in 720p or plus..
and only in messenger app also..
awalsnake said:
i haven't encounter any issue like that...
---------- Post added at 12:06 PM ---------- Previous post was at 12:02 PM ----------
i haven't encounter this issue either ..
there is one bug that i have face is the video playback in youtube is laggy when u watch videos in 720p or plus..
and also in messenger app.
---------- Post added at 12:08 PM ---------- Previous post was at 12:06 PM ----------
i haven't encounter this issue either ..
there is one bug that i have face is the video playback in youtube is laggy when u watch videos in 720p or plus..
and only in messenger app also..
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Did you used your external "sdcard" as an "internal memory" and after that if you do one or two or maybe three restart then your "sdcard" again get forgeted or corrupted you never encounter this problem?
If you say "NO" then "THAT IS IMPOSSIBLE"
can't believe my device got android 10 gonna try right now
Language show in square box
Hi some language show in square box how to solve please help and I appreciate this rom
Security patches
Hi Dev (@A$teroid),
Thank you for the excellent ROM! Have been using it for the past couple of days and everything has been smooth and crisp so far. No issues to report.
I want to use this as a daily driver and was worried about security. Do you plan to maintain this ROM for a little while? I see that the security patch is updated till last month which is great. Do you hope to be able to release security patches in the coming months? And do you recommend using this as a daily driver?
Thanks so much for your efforts - most appreciated
S
-ARiCK- said:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Did you used your external "sdcard" as an "internal memory" and after that if you do one or two or maybe three restart then your "sdcard" again get forgeted or corrupted you never encounter this problem?
If you say "NO" then "THAT IS IMPOSSIBLE"
Click to expand...
Click to collapse
What SD card are you using? What class is it? Make sure it is at least a Class 10. I tried first with a Class 4 and it said the card was too slow. I am now using a Class 10. When the phone restarts, it takes a few seconds for the card to be recognised (phone notification displays SD missing) but that goes away in 5-10 seconds. Then everything runs like a charm. So try again with a faster card if you have one?
So all good there!
Hope this helps!
Cheers!
santoshwins said:
Hi Dev (@A$teroid),
Thank you for the excellent ROM! Have been using it for the past couple of days and everything has been smooth and crisp so far. No issues to report.
I want to use this as a daily driver and was worried about security. Do you plan to maintain this ROM for a little while? I see that the security patch is updated till last month which is great. Do you hope to be able to release security patches in the coming months? And do you recommend using this as a daily driver?
Thanks so much for your efforts - most appreciated
S
Click to expand...
Click to collapse
Help, please? Thanks!
Still waiting for fixed sd card into internal memory issue!
the best android 10 for Lenovo A6000. better performance compared to other roms. lots of features.
The First and the only rom that has camera lock screen feature that really work !
Now I am unable see Indian fonts instead square boxes
Please kindly fix the bug, or else give me a flash file for indian fonts. Pliss also fix wifi direct greyed out, shareit which uses wifi direct, due to this shareit uses only Bluetooth, transfer is slow
boot problem...
it's not booting,, still showing boot screen..
what's the solution for this.... plz....