Related
Stock OneUI Release for J6
So, a couple of days ago OneUI was released for the SM-J600F. I simply took the ROM and made it flashable via ZIP
This is JUST STOCK ONEUI """OFFICIAL""" for the J6, DO NOT EXPECT EXTRA FEATURES!
Also, I debloated it lol
BUT
I want to make something clear. If you have not read this and this allow me to summarize
Pie brings new locks to the table, something far worse than rmm lock. If you flash Pie officially, either via OTA or via Odin, these new locks will prevent you from rooting, as I understand it.
The workaround is to flash Pie but with Oreo BL.
BUT
We don't know how long that will keep working
Samsung can easily make Pie only boot with Pie BL.
So... for now... DO NOT UPLOAD YOUR BOOTLOADER TO PIE YET OR YOU WILL NOT BE ABLE TO ROOT OR FLASH CUSTOM BINARY ANYMORE!
And this is where this zip comes in handy!
This ZIP will not change your BL (it will keep your Oreo BL) and included is a kernel (Helios Pie kernel) that fixes small issues. Also, if anything were to go wrong, you still have TWRP to backup and restore, how awesome is that?
So, you have been warned!
Downloads:
Android File Host:
https://www.androidfilehost.com/?fid=1395089523397933484
Mega: https://mega.nz/#!5BEXVSgJ!I6ta7PQQFHFqF9b1i3QeE5pANf1lVmF_c87uS6p8vEI
OneDrive: https://1drv.ms/u/s!AjUnizekeauKhAHeYnt-lwr5YZDW
(I'll try to upload to GDrive and AFH soon, I promise)
Instructions:
-Create a backup (just in case)
-Wipe system and data
-Flash zip
-Reboot and wait 10 minutes
If after 10 minutes, it is still in logo, force a reboot (Hold VOL +, VOL - and POWER) and then the ROM will work
"Features":
-Official Pie!
-In theory, should not have major bugs
-Pre-rooted with Magisk
-Debloated
If you appreciate having Pie early (and rooted!) please consider a donation to ananjaser1211, who was kind enough to compile Helios Pie kernel without even having the device!!!
http://paypal.me/ananjaser1211
@ananjaser1211 for compiling Pie kernel for the J6... without even having the device! Amazing job!
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
XDA:DevDB Information
[STOCK][OneUI][9.0]Stock OneUI for J600 G/F, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255, ananjaser1211
Source Code: [url]https://github.com/ananjaser1211/Helios_7870[/URL]
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-04-03
Last Updated 2019-04-03
FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of the ROM again
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] My phone isn't rooted
[A] This ROM has Magisk pre-packaged. If you do not see Magisk Manager, just download the latest version of it in xda
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice
Join our Telegram group
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group
How to report a bug/Ask for a change
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway
Enjoy Pie
Yes its working
You should tell that vendor will be also replaced.
Downloading
Downloading...
nice work
Nice work Sha! Working great. Battery is draining faster as compared to Ncx A8. Keep it up.
MKashifSajjad said:
Nice work Sha! Working great. Battery is draining faster as compared to Ncx A8. Keep it up.
Click to expand...
Click to collapse
battery drains faster then stock oreo rom ? do you find any other bug ? camera works good ? can you check please if camera is flickering while taking photo to computer monitor or tv ?
Battery takes about 2 cycles to stabilize. My first testers and me did notice higher than normal drain but then reduced the drain a lot.
Aleko91 said:
battery drains faster then stock oreo rom ? do you find any other bug ? camera works good ? can you check please if camera is flickering while taking photo to computer monitor or tv ?
Click to expand...
Click to collapse
It's normal for any camera to flicker when taking photos of older tvs as far as I know
j6 plus :crying:
???
This is not the J6+ forum lol
Will it work for On6
J600G please reply
naviidgull said:
Will it work for On6
J600G please reply
Click to expand...
Click to collapse
Yeah, maybe lol. Backup before you try anything
Digital TV is working?
Links are not working anymore bro please bro new link
ShaDisNX255 said:
It's normal for any camera to flicker when taking photos of older tvs as far as I know
Click to expand...
Click to collapse
on stock oreo rom it's not flickering , but it flickers even on odex stock rom
This is the official build of Jaguar Rom. I have been building Android roms since 2012 for various devices including multiple Sonys, Lenovo Zuk and Oneplus 5 (my current device). You can check the Oneplus 5 development thread here: Oneplus 5 thread
Jaguar rom is focused on hardening of Android and kernel. As such, the rom has hardened bionic and tightened security. Kernel has security features ported from linux kernel 4.14.
Otherwise, the rom has all standard+ features that come with custom roms:
1 Rom control with custom Power menu, Statusbar, Buttons, Navbar, Quicksettings, Lockscreen, Notifications, Gestures, Themes etc.
2. Working FDE encryption, which is not forced, but could be enabled within Settings
3. Heavily modified Art, Bionic System/Vold and System/Security
4. Telephony response ('silently acknowledged') to Type Zero sms disabled
5. Toggle to disable Captive Portal logging
6. Rom could be booted on locked bootloader out of the box
7. All customizations as listed in '1'
8. MicroG ready
Instructions:
1. If you are encrypted on any other rom, you need to do a factory reset in TWRP, the option, where you enter 'Yes' to confirm.
2. Reboot into TWRP (after factory reset), transfer Jaguar to internal SD, wipe system/cache/data and /vendor, if you have it;
3. Flash the rom and reboot.
You will be unencrypted. If you want encryption (FDE, not ICE), encrypt withing Settings.
Rom V1 is in the attachment. All subsequent release will be posted in #3.
XDAevDB Information
JAGUAR R, ROM for the OnePlus 3
Contributors
optimumpro
Kernel Source Code: Kernel
ROM OS Version: 11.x R
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlocked Bootloader, if Magisk is Required
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2021-01-04
Created 2021-01-04
Credit: AOSP, Lineage, DU, MSM-Xtended, Crdroid
Reserved
January 8: New release, V2.0
1. January security patches
2. Rom rebuilt with speed flag. As a result, it is larger in size, but should be speedier, because there is less runtime compiling involved
Will try it out & report. Many Thanks for keeping our OP3/3T alive. Appreciate all the great developers work on XDA.
Update - Added a few screenshots. Everything is working so far. Snappy & Tons of Customization options. Rooted(Magisk Canary).
Update - Hotspot is not working for me. Typically I do not use this feature so I don't test this function.
kash_si said:
Will try it out & report. Many Thanks for keeping our OP3/3T alive. Appreciate all the great developers work on XDA.
Update - Added a few screenshots. Everything is working so far. Snappy & Tons of Customization options. Rooted(Magisk Canary).
Click to expand...
Click to collapse
How about hotspot? work on both 2.4ghz & 5ghz?
does it work for oneplus 3t too or only oneplus 3.thanks
agustinustjahyo79 said:
does it work for oneplus 3t too or only oneplus 3.thanks
Click to expand...
Click to collapse
Every roms on this sub forum works on both.
I'll give this one a try, see how it is. Will report back later, thanks for the rom
faiz5200 said:
How about hotspot? work on both 2.4ghz & 5ghz?
Click to expand...
Click to collapse
Hotspot is not working for me. Typically I do not use this feature so I don't test this function.
Updated my initial response.
kash_si said:
Will try it out & report. Many Thanks for keeping our OP3/3T alive. Appreciate all the great developers work on XDA.
Update - Added a few screenshots. Everything is working so far. Snappy & Tons of Customization options. Rooted(Magisk Canary).
Update - Hotspot is not working for me. Typically I do not use this feature so I don't test this function.
Click to expand...
Click to collapse
How's the battery life so far? Problems with wakelock?
lapirado said:
How's the battery life so far? Problems with wakelock?
Click to expand...
Click to collapse
I am waiting for @optimumpro to release update with Jan-2021 ASP's. Then I plan to use it as my daily driver.
Currently I have it on my OP3 as a testbed, so can't really provide feedback on battery life. For my OP3/3T over the years average daily SOT has been around 2:30 to 3:30 hours upto & including Android 11.
kash_si said:
I am waiting for @optimumpro to release update with Jan-2021 ASP's. Then I plan to use it as my daily driver.
Currently I have it on my OP3 as a testbed, so can't really provide feedback on battery life. For my OP3/3T over the years average daily SOT has been around 2:30 to 3:30 hours upto & including Android 11.
Click to expand...
Click to collapse
Thanks for the reply.
But that sot seems quite short. Depending on the use you gave, ofc.
But with moderate use, I usually get around 4h.
@optimumpro
So your ROM seems to be build from MSM Xtended sources. There are improvements or advantages in your ROM over the original Xtended ROM?
jaydee 77 said:
@optimumpro
So your ROM seems to be build from MSM Xtended sources. There are improvements or advantages in your ROM over the original Xtended ROM?
Click to expand...
Click to collapse
I used AOSP sources, as well as Msm-Xtended, as well as DU, as well as Crdroid, but:
1. Art, Bionic, System/Vold, System/Security and most of /frameworks/base sources are different
2. Interface is different
3. Some blot removed
4. Several different apps
5. Kernel is different: I squashed about 20 commits (hardening) in one
6. Blobs are different
7. My rom can disable (with a toggle) Captive portal apk, which is spyware. Otherwise, if you uninstall it, you'll have a nasty 'X' in wifi and some sites may not work
8. Acknowledgement of receipt of type zero SMS is disabled. This is is the first thing hackers do - ping your phone with an sms that doesn't appear on screen... .
But ultimately, only you can decide which rom to use.
@optimumpro
My post was not to offend you. Thanks for the explanation and clarification. Your points make sense and they are great and important plus over the other ROMs. This should me mentioned in the OP.
I know that asking for ETA is not welcome on XDA. But one more question concerning updates. What are your plans for that. Your ROM has security in focus. Do you think building monthly updates for Android Security Bulletin?
I don't switch ROMs very often, cos I'm to lazy for this. So when switching to a new ROM I'll like to stick on it for a long time.
jaydee 77 said:
@optimumpro
My post was not to offend you. Thanks for the explanation and clarification. Your points make sense and they are a plus over the other ROMs. This should me mentioned in the OP.
I know that asking for ETA is not welcome on XDA. But one more question concerning updates. What are your plans for that. Your ROM has security in focus. Do you think building monthly updates for Android Security Bulletin?
I don't switch ROMs very often, cos I'm to lazy for this. So when switching to a new ROM I'll like to stick on it for a long time.
Click to expand...
Click to collapse
Usually, once a month. However, this rom is version 1, so, there might be more updates. Definitely, one with January security patches in a few days.
January 8: New release, V2.0
1. January security patches
2. Rom rebuilt with speed flag. As a result, it is larger in size, but should be speedier, because there is less runtime compiling involved
Dirty flash is fine on top of V-1. Download in post #3.
optimumpro said:
January 8: New release, V2.0
1. January security patches
2. Rom rebuilt with speed flag. As a result, it is larger in size, but should be speedier, because there is less runtime compiling involved
Dirty flash is fine on top of V-1. Download in post #3.
Click to expand...
Click to collapse
hotspot fixed in this build?
BrahmaGandhi said:
hotspot fixed in this build?
Click to expand...
Click to collapse
No. - I am using the latest version of TWRP - twrp-3.5.0_9-0-oneplus3
Great to see this hardened flavour of 11 which can even be used with locked bootloader @optimumpro !
As I understand you will have monthly updates also which is great to keep our phone up to date.
One question though; is it possible to use /data/local/userinit.sh scripts with this rom?
Would be a great option to do some system settings without the need of Magisk or other stuff.
LineageOS is a free, community built, aftermarket firmware distribution of android, which is designed to increase performance and reliability over stock android for your device.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit LineageOS Wiki.
Disclaimer: This is the first time I post a ROM, and I'm not able to even test it myself at the moment. It may not even boot, kill your cat or make you lose your stimulus check. I'm putting it out here because there is no lineage OS for 7t (but there is for 7t pro). This is based on the device tree of the 7t pro, I know the pro ROM boots fine on regular 7t, but due to motorized camera setup on the pro, the camera is completely broken on regular. This is the (only) thing I was trying to solve.
ROM: <link removed as not working (yet)>
lineage recovery: https://drive.google.com/uc?export=download&id=1O63wABMA-el8iiYOPkHhhc_zFvUiuJfV
device sources: https://github.com/joske/android_device_oneplus_hotdogb
kernel sources: https://github.com/LineageOS/android_kernel_oneplus_sm8150
Credits:
LineageOS team
StatiXOS (for reference to their hotdogb device tree)
Update:
What works:
ROM boots
wifi works
Lineage Camera works!
audio/video playback
fingerprint
What doesn't work:
GSM/4G does not work, device crashes hard when you try to use the dialer
GCam crashes
So clearly this is pre-alpha and you should not flash it ;-). Will try to fix.
reserved
Has anyone tried this yet?
KashMiester said:
Has anyone tried this yet?
Click to expand...
Click to collapse
Tonight as work blocks downloads
Wow gotta try this out tonight
don't flash, it's not working. I've updated the OP. I'm rebuilding with muppets vendor blobs. Will report back (probably tomorrow as build takes hours and it's already late).
josdehaes said:
don't flash, it's not working. I've updated the OP. I'm rebuilding with muppets vendor blobs. Will report back (probably tomorrow as build takes hours and it's already late).
Click to expand...
Click to collapse
Thanks for the update
It booted but then powers off during setup (right past WIFI password). Seemed fast though
good
Sorry guys, I'm struggling with this. I guess I created this thread (way) too early.
Or it doesn't boot, or it boots, but no GSM and crashes quickly. I continue to learn, hopefully in another 100 attempts I'll have something usable . Are there any people here wanting to help out by testing (most probably broken ) builds? It's difficult for me to keep flashing my only phone (I need it to be working).
I'm now trying with 18.1. Lineage OS does not have a kernel or blobs tree for android 11 for sm8150, but yaap does. Maybe it's a stupid idea, but trying anyway
josdehaes said:
Sorry guys, I'm struggling with this. I guess I created this thread (way) too early.
Or it doesn't boot, or it boots, but no GSM and crashes quickly. I continue to learn, hopefully in another 100 attempts I'll have something usable . Are there any people here wanting to help out by testing (most probably broken ) builds? It's difficult for me to keep flashing my only phone (I need it to be working).
I'm now trying with 18.1. Lineage OS does not have a kernel or blobs tree for android 11 for sm8150, but yaap does. Maybe it's a stupid idea, but trying anyway
Click to expand...
Click to collapse
THREAD CLOSED as placeholders (i.e. threads without a download possibility) are not accepted!
Please advise the moderators team (best via the report function) to re-open your thread when ready to provide a download link.
Please refer to this section of the "Device Forum Rules (Read before posting)":
ROMs, Kernels, Recoveries, & Other Development Section
This section is fexclusively reserved for ROMS, Kernels, Recoveries etc. if they are own development
Try to keep the device forum CLEAN! No offtopic posting and no questions posted in this section/sub-forum.
Use the report button in the lower left corner of an offending post or PM/conversation to let us mods know we need to take action. Don't take matters into your own hands!!!
Sources need to be posted for all kernels!!! Also for all ROMS where license demands it. Refer to post no. 2 above.
You need to use TAGS like [ROM] or [KERNEL] and so on as used in all dev forums throughout XDA (see post no. 4 below).
Any disputes between developers should be handled by PM; try to solve the issue amicably via PM. No public posting in a any thread regarding these matters.
Rom issues should be discussed within their respective threads.
Thread titles should ALWAYS coincide with ROMS ALREADY AVAILABLE FOR DOWNLOAD!!! No advance notification of incoming ROM through thread title. A changelog for the yet unreleased Rom can be included in the OP or in another post CLEARLY MARKED as EXPECTED CHANGELOG.
All threads posted in this section/sub-forum and that are NOT about own ROMS, Kernels, Recoveries etc., or R&D in general will be closed or deleted. Posters that will choose to disregard the previous guidelines will be infracted.
Click to expand...
Click to collapse
I wish you success in getting your ROM running without issues soon. Happy developing.
Stay safe and stay healthy!
Regards
Oswald Boelcke
Forum Moderator
Hi. Could someone tell me what is the fastest Custom Rom that generates over 60k on antutu? I don't mind errors like Camera etc. Please give me a link. Greetings
K-BOX2022 said:
Hi. Could someone tell me what is the fastest Custom Rom that generates over 60k on antutu? I don't mind errors like Camera etc. Please give me a link. Greetings
Click to expand...
Click to collapse
Derpfest, Paranoid Android, KOSP
K-BOX2022 said:
Hi. Could someone tell me what is the fastest Custom Rom that generates over 60k on antutu? I don't mind errors like Camera etc. Please give me a link. Greetings
Click to expand...
Click to collapse
Why not try it yourself and find out which one suit you better? Or at least read the thread for the feedback from another users
I read, I read. I need it to go as fast as possible in games and keep it stiff at 120Hz like a KOSP but it has google and I wanted a vanilla version. They end up remotely and I have to sit in front of the books and I don't have time to install various mods so I created this topic. If they extended remote lessons, I could search for Custom Roms
K-BOX2022 said:
I read, I read. I need it to go as fast as possible in games and keep it stiff at 120Hz like a KOSP but it has google and I wanted a vanilla version. They end up remotely and I have to sit in front of the books and I don't have time to install various mods so I created this topic. If they extended remote lessons, I could search for Custom Roms
Click to expand...
Click to collapse
Then i recommend CrDroid 8 i use it as daily120Hz, good performance and battery
Or is there a version without Services Google?
K-BOX2022 said:
Hi. Could someone tell me what is the fastest Custom Rom that generates over 60k on antutu? I don't mind errors like Camera etc. Please give me a link. Greetings
Click to expand...
Click to collapse
K-BOX2022 said:
Hi. Could someone tell me what is the fastest Custom Rom that generates over 60k on antutu? I don't mind errors like Camera etc. Please give me a link. Greetings
Click to expand...
Click to collapse
share your Xiaomi Poco X3 Pro rom benchmarks
hi all i just wanna make this post to let us share our experiences with poco x3 pro custom roms which one is best and and fastest for our phones for me i tried all roms and in the end the best rom for me is Krypton AOSP ROM for Poco X3 Pro (...
forum.xda-developers.com
K-BOX2022 said:
Or is there a version without Services Google?
Click to expand...
Click to collapse
Just don't flash Gapps if you don't want google
muse_21 said:
Just don't flash Gapps if you don't want google
Click to expand...
Click to collapse
am sorry man I was wrong if you want 62k rom google KOSP 2.3 vayu on google first link if you want gaming rom search for havoc os vayu and lawrun kernel vayu or ngk kernel vayu
tazaga said:
Do you read what we replied to you ? if you want 62k rom google KOSP 2.3 vayu on google first link if you want gaming rom search for havoc os vayu and lawrun kernel vayu or ngk kernel vayu
Click to expand...
Click to collapse
What? Why are you being rude to me. I'm just answering his question. It's not me who ask first, I just try to give suggestions to him
Hi. I have already reinstalled over 8 roms but there is nowhere the same function as KOSP. My point is that, for example, when I watch the yt vanced 4K movie, it drops to screen 60fps and on kosp you can block it so that it works all the time at 120 and this is mega great, only that this system has disadvantages that I find it hard to accept (blockage of installing modded applications, large amount of bootloop after installing mods via magisk (os lineage does not exist)). That is why I have a warm request. To find a system that:
1. It will block rigidly 120hz on yt how it has KOSP
2. Lack of google services (KOSP has them and I really don't want them).
muse_21 said:
What? Why are you being rude to me. I'm just answering his question. It's not me who ask first, I just try to give suggestions to him
Click to expand...
Click to collapse
Am sorry about that I was wrong didn't meant to mess ur day
K-BOX2022 said:
Hi. I have already reinstalled over 8 roms but there is nowhere the same function as KOSP. My point is that, for example, when I watch the yt vanced 4K movie, it drops to screen 60fps and on kosp you can block it so that it works all the time at 120 and this is mega great, only that this system has disadvantages that I find it hard to accept (blockage of installing modded applications, large amount of bootloop after installing mods via magisk (os lineage does not exist)). That is why I have a warm request. To find a system that:
1. It will block rigidly 120hz on yt how it has KOSP
2. Lack of google services (KOSP has them and I really don't want them).
Click to expand...
Click to collapse
we need some one to look at this ROM and do some work on it it will be amazing I did all I can to reach the developer but I failed
tazaga said:
Am sorry about that I was wrong didn't meant to mess ur day
Click to expand...
Click to collapse
It's okay man
And someone knows how to find the module for the magisk module that blocks the screen refreshing rigidly (120hz). I tried the Magisk Hide method with Poco X3 NFC but it also doesn't work
I found another ROM this ROM is a beast on PUBG KOMODO OS this thing is on another level
Android 12 everything works and hide magisk safety net works! Perfection
Thank you for your help. I coped with KOSP but a lot of things like Driver Adreno Magisk, DarkGpuRendering adreno650 port won't work. The main launcher goes crazy as it installs this add-on. Found 144hz options but likes bugs. The author of this mod, Dark ... explained what the problem is. What does it depend on that KOSP wogule does not want to cooperate with these mods? PS I dug this zip file DARKGPURENDERING v3.5 but I didn't know the file with refresh rate. Where could it be?
K-BOX2022 said:
Thank you for your help. I coped with KOSP but a lot of things like Driver Adreno Magisk, DarkGpuRendering adreno650 port won't work. The main launcher goes crazy as it installs this add-on. Found 144hz options but likes bugs. The author of this mod, Dark ... explained what the problem is. What does it depend on that KOSP wogule does not want to cooperate with these mods? PS I dug this zip file DARKGPURENDERING v3.5 but I didn't know the file with refresh rate. Where could it be?
Click to expand...
Click to collapse
For me the addon's I tried on kosp ROM didn't work and they scored low benchmarks and awful gaming...the only thing i got from them is more heat
Derpfest is the fastest, but battery backup not so good. i mean of course if you need performance you have to let battery do his job. you will notice that LineageOS has best battery because its not only focused on performance. but focused on all to maintain the stability
View attachment 5737423
We are very excited to announce the beta of Paranoid Android Topaz, based on Android 13.
On the first launch, you’ll notice a clean setup with beautiful wallpapers from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app from the PlayStore.
Our builds are based on the Code Linaro Organization Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Starting from Beta 3, we are unifying the zip for OnePlus 9 and 9 Pro to avoid any confusion and easier development!
Notice
We kindly ask all of you that are in a position to donate anything, to help and support us so we can provide better and faster build releases, as well as increase the download speed of our servers, all looking for your enjoyment.
You can donate on the link below:
Donate
Device-specific issues
You tell me!
Requirements
Make sure you've latest platform tools for Android.
Please be on the latest version of OOS 11 before you install AOSPA. (Flashing firmware through fastboot will also work)
Download Latest
You can also get older beta builds from our website Paranoid Android website
Note: Custom kernels are NOT supported the kernel says it supports PA and GMS is included!
Changelogs for Beta 4
Fixed Alert slider calibration which caused issues with middle and last position
Fixed excessive 5G idle drains.
Fixed AOD not updating.
Updated vibration patterns for alert slider feedback
Set AOD screen brightness same as stock.
Changelogs for Beta 3
Unified builds for OnePlus 9 and 9 Pro.
Switched back to OOS 11 firmware.
Switched to arter97 kernel.
Implement sensor's HAL for Screen Off UDFPS, DT2W and ST2W.
AOD improvements.
Fingerprint improvements.
Update vibrator HAL and drivers from OOS 13.
Disable AOSP's Prevent ringing gesture.
Updated CarrierConfigs.
Update to LA.UM.9.14.r1-21000-LAHAINA.QSSI13.0.
Fix OGG audio playback.
CLEAN FLASH REQUIRED ONLY IF COMING FROM BETA 2.
Beta 3 users can flash beta 4 without wiping their data.
Guide to Unlock/Enable 5G
Keep an eye on our Twitter account, @paranoidaospa, as we will be posting about new features getting included in the release builds, as well as links to betas for those devices that will get them. For more detailed information please have a look at the second post of this thread of each build changelog on the website.
Paranoid Android Topaz flashing
Instructions
Unlock your bootloader, and in bootloader mode follow the next command
fastboot update aospa-topaz-beta-*-image.zip
After the reboot, factory reset the device (only required for the first time you flash Paranoid Android)
Sources
Kernel Source
AOSPA Source
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Download Channel (Telegram)
Paranoid Android Community (Telegram)
Paranoid Android OnePlus 9 Family community (Telegram)
Cheers and #StayParanoid!
Wooh Rom installation was but different can I flash in oos 11 firmware
Any ss?
Vishalcj17 said:
View attachment 5737425
We are very excited to announce the beta of Paranoid Android Topaz, based on Android 13.
On the first launch, you’ll notice a clean setup with beautiful wallpapers from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app from the PlayStore.
Our builds are based on the Code Linaro Organization Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Notice
We kindly ask all of you that are in a position to donate anything, to help and support us so we can provide better and faster build releases, as well as increase the download speed of our servers, all looking for your enjoyment.
You can donate on the link below:
Donate
Device-specific issues
You tell me!
Requirements
Make sure you've latest platform tools for Android.
Please be on the latest version of OOS 12 before you install AOSPA. (Flashing firmware through fastboot will also work
Download
You can always get our Beta builds from our website Paranoid Android website
Note: Custom kernels are NOT supported the kernel says it supports PA and GMS is included!
Changelogs
Keep an eye on our Twitter account, @paranoidaospa, as we will be posting about new features getting included in the release builds, as well as links to betas for those devices that will get them. For more detailed information please have a look at the second post of this thread of each build changelog on the website.
Paranoid Android Topaz released
Instructions
Unlock your bootloader, and in bootloader mode follow the next command
fastboot update aospa-topaz-beta-*-image.zip
After the reboot, factory reset the device (only required for the first time you flash Paranoid Android)
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Download Channel (Telegram)
Paranoid Android Community (Telegram)
Paranoid Android OnePlus 9 Family community (Telegram)
Cheers and #StayParanoid!
Click to expand...
Click to collapse
Hell yeah can't wait to try it
Phoenix47 said:
Already on topaz beta 1 but still getting this update notification.
View attachment 5737741
Click to expand...
Click to collapse
How's performance? Compared to Stag, PEX....etc..
Phoenix47 said:
Performance is good. Geekbench score is also high.
Click to expand...
Click to collapse
does it have auto brightness and sync toggles in quick settings?
gapps included?
Phoenix47 said:
Autobrightness toggle is there and gapps included.
Click to expand...
Click to collapse
thanks for reply,
there are 2 files on GDrive which one to download?
and how to flash ? i see a different method in OP than update from recovery
thanks again
ahmd gom3aa said:
thanks for reply,
there are 2 files on GDrive which one to download?
and how to flash ? i see a different method in OP than update from recovery
thanks again
Click to expand...
Click to collapse
Rename zip to pa.zip. reboot into bootloader "fastboot update pa.zip" let it install, when it returns to bl, factory reset . Boot into aospa. And if there is 2 files lemonade is for reg op9. Lemonadep would of course be the pro model.
Current OOs has to be on both slots prior to installation.
when i click on download link from paranoid website, i see 2 files on gdrive, both for op9, but one is 2.2 gb and the other is 1.67 gb, both are dated 17/10 , so which one to download
ahmd gom3aa said:
when i click on download link from paranoid website, i see 2 files on gdrive, both for op9, but one is 2.2 gb and the other is 1.67 gb, both are dated 17/10 , so which one to download
Click to expand...
Click to collapse
Unsure try. The smaller one might be built without Gapps other with. Someone that knows will have to chime in.
Phoenix47 said:
The one with smaller size can be sideloaded with any recovery. The other one can be flashed from fastboot.
Click to expand...
Click to collapse
boggles the mind why more dont aim for fastboot update implementation. I must be missing a reason why
mattie_49 said:
Unsure try. The smaller one might be built without Gapps other with. Someone that knows will have to chime in.
Click to expand...
Click to collapse
I have tried both files via fastboot and the recovery. Everything boots but i cant sideload magisk and if i attempt to replace boot.img with a magisk flashed variant i made, it fails to boot.
any trick with this i need to be aware of?
love youuuu uuu uu
applyscience said:
I have tried both files via fastboot and the recovery. Everything boots but i cant sideload magisk and if i attempt to replace boot.img with a magisk flashed variant i made, it fails to boot.
any trick with this i need to be aware of?
love youuuu uuu uu
Click to expand...
Click to collapse
Post in thread '[ROM][OFFICIAL][lemonade][11] LineageOS 18.1' https://forum.xda-developers.com/t/rom-official-lemonade-11-lineageos-18-1.4298845/post-86264401
Read back a few and ahead a few posts. This is how I was successfull on last aospa builds.
mattie_49 said:
Post in thread '[ROM][OFFICIAL][lemonade][11] LineageOS 18.1' https://forum.xda-developers.com/t/rom-official-lemonade-11-lineageos-18-1.4298845/post-86264401
Read back a few and ahead a few posts. This is how I was successfull on last aospa builds.
Click to expand...
Click to collapse
nvm i got it. i enabled the settings below when extracting the boot.img and flashed magisk with 24.1 and then upgraded in the OS. basically kitchen sinked the troubleshooting because im so late for work lol.
thank you for the link/info as always.
Edit: Vishalcj17: this is, by far the stablest A13 ive experienced on OP9 ROMs. Everyones been doing great, but it's clear you have a deeper grasp on this whole process than the average maintainer. Loving the support, thank you for bringing PA to OP9
All I will beg and ask for is OOSCAM native support and Google dial AI call screening without the need for separate moduals. Neither are Important, its just honestly the only "issues" i seem to be left with after coming back to A13 again.
Good time, I installed this firmware and ran into a problem: After all the manipulations done, when the system starts up, pressing the screen does not respond, but the side buttons work. Tell me what can be done?
bobensky said:
Доброго времени, Установил эту прошивку и столкнулся с проблемой: После всех проделанных манипуляций при запуске системы на нажатия экран не реагирует, но боковые кнопки работают. Подскажите что можно сделать?
Click to expand...
Click to collapse
try again to install ROM on top. it looks like it has been installed in one slot
imv_9 said:
try again to install ROM on top. it looks like it has been installed in one slot
Click to expand...
Click to collapse
Thank you so much. I flashed it in both slots and it worked
bobensky said:
Good time, I installed this firmware and ran into a problem: After all the manipulations done, when the system starts up, pressing the screen does not respond, but the side buttons work. Tell me what can be done?
Click to expand...
Click to collapse
https://wiki.lineageos.org/devices/lemonade/
Read all the information on this link. It is the official wiki to flash Linage but it can help to follow this for other roms especially if you're facing issues and can't figure out what is wrong this is a good read up. Thanks for the other guy spotting out the Slots.
<Moderator Note>: Thread closed and all links removed due to the missing GPL legal required link to the kernel source code and no response.
@Vishalcj17 if you want to take care of this requirement, please just use the Report button on the OP and let us know when you're ready, then we can unlock the thread.
Thank you,
@roirraW "edor" ehT
roirraW edor ehT said:
<Moderator Note>: Thread closed and all links removed due to the missing GPL legal required link to the kernel source code and no response.
@Vishalcj17 if you want to take care of this requirement, please just use the Report button on the OP and let us know when you're ready, then we can unlock the thread.
Thank you,
@roirraW "edor" ehT
Click to expand...
Click to collapse
@Vishalcj17 Thread has been re-opened on your request. Please add the link to your kernel source within the next three days and advise @roirraW "edor" ehT when accomplished for evaluation. Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator