This is the official build of Jaguar Rom. I have been building Android roms since 2012 for various devices including multiple Sonys, Lenovo Zuk and Oneplus 5 (my current device). You can check the Oneplus 5 development thread here: Oneplus 5 thread
Jaguar rom is focused on hardening of Android and kernel. As such, the rom has hardened bionic and tightened security. Kernel has security features ported from linux kernel 4.14.
Otherwise, the rom has all standard+ features that come with custom roms:
1 Rom control with custom Power menu, Statusbar, Buttons, Navbar, Quicksettings, Lockscreen, Notifications, Gestures, Themes etc.
2. Working FDE encryption, which is not forced, but could be enabled within Settings
3. Heavily modified Art, Bionic System/Vold and System/Security
4. Telephony response ('silently acknowledged') to Type Zero sms disabled
5. Toggle to disable Captive Portal logging
6. Rom could be booted on locked bootloader out of the box
7. All customizations as listed in '1'
8. MicroG ready
Instructions:
1. If you are encrypted on any other rom, you need to do a factory reset in TWRP, the option, where you enter 'Yes' to confirm.
2. Reboot into TWRP (after factory reset), transfer Jaguar to internal SD, wipe system/cache/data and /vendor, if you have it;
3. Flash the rom and reboot.
You will be unencrypted. If you want encryption (FDE, not ICE), encrypt withing Settings.
Rom V1 is in the attachment. All subsequent release will be posted in #3.
XDAevDB Information
JAGUAR R, ROM for the OnePlus 3
Contributors
optimumpro
Kernel Source Code: Kernel
ROM OS Version: 11.x R
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlocked Bootloader, if Magisk is Required
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2021-01-04
Created 2021-01-04
Credit: AOSP, Lineage, DU, MSM-Xtended, Crdroid
Reserved
January 8: New release, V2.0
1. January security patches
2. Rom rebuilt with speed flag. As a result, it is larger in size, but should be speedier, because there is less runtime compiling involved
Will try it out & report. Many Thanks for keeping our OP3/3T alive. Appreciate all the great developers work on XDA.
Update - Added a few screenshots. Everything is working so far. Snappy & Tons of Customization options. Rooted(Magisk Canary).
Update - Hotspot is not working for me. Typically I do not use this feature so I don't test this function.
kash_si said:
Will try it out & report. Many Thanks for keeping our OP3/3T alive. Appreciate all the great developers work on XDA.
Update - Added a few screenshots. Everything is working so far. Snappy & Tons of Customization options. Rooted(Magisk Canary).
Click to expand...
Click to collapse
How about hotspot? work on both 2.4ghz & 5ghz?
does it work for oneplus 3t too or only oneplus 3.thanks
agustinustjahyo79 said:
does it work for oneplus 3t too or only oneplus 3.thanks
Click to expand...
Click to collapse
Every roms on this sub forum works on both.
I'll give this one a try, see how it is. Will report back later, thanks for the rom
faiz5200 said:
How about hotspot? work on both 2.4ghz & 5ghz?
Click to expand...
Click to collapse
Hotspot is not working for me. Typically I do not use this feature so I don't test this function.
Updated my initial response.
kash_si said:
Will try it out & report. Many Thanks for keeping our OP3/3T alive. Appreciate all the great developers work on XDA.
Update - Added a few screenshots. Everything is working so far. Snappy & Tons of Customization options. Rooted(Magisk Canary).
Update - Hotspot is not working for me. Typically I do not use this feature so I don't test this function.
Click to expand...
Click to collapse
How's the battery life so far? Problems with wakelock?
lapirado said:
How's the battery life so far? Problems with wakelock?
Click to expand...
Click to collapse
I am waiting for @optimumpro to release update with Jan-2021 ASP's. Then I plan to use it as my daily driver.
Currently I have it on my OP3 as a testbed, so can't really provide feedback on battery life. For my OP3/3T over the years average daily SOT has been around 2:30 to 3:30 hours upto & including Android 11.
kash_si said:
I am waiting for @optimumpro to release update with Jan-2021 ASP's. Then I plan to use it as my daily driver.
Currently I have it on my OP3 as a testbed, so can't really provide feedback on battery life. For my OP3/3T over the years average daily SOT has been around 2:30 to 3:30 hours upto & including Android 11.
Click to expand...
Click to collapse
Thanks for the reply.
But that sot seems quite short. Depending on the use you gave, ofc.
But with moderate use, I usually get around 4h.
@optimumpro
So your ROM seems to be build from MSM Xtended sources. There are improvements or advantages in your ROM over the original Xtended ROM?
jaydee 77 said:
@optimumpro
So your ROM seems to be build from MSM Xtended sources. There are improvements or advantages in your ROM over the original Xtended ROM?
Click to expand...
Click to collapse
I used AOSP sources, as well as Msm-Xtended, as well as DU, as well as Crdroid, but:
1. Art, Bionic, System/Vold, System/Security and most of /frameworks/base sources are different
2. Interface is different
3. Some blot removed
4. Several different apps
5. Kernel is different: I squashed about 20 commits (hardening) in one
6. Blobs are different
7. My rom can disable (with a toggle) Captive portal apk, which is spyware. Otherwise, if you uninstall it, you'll have a nasty 'X' in wifi and some sites may not work
8. Acknowledgement of receipt of type zero SMS is disabled. This is is the first thing hackers do - ping your phone with an sms that doesn't appear on screen... .
But ultimately, only you can decide which rom to use.
@optimumpro
My post was not to offend you. Thanks for the explanation and clarification. Your points make sense and they are great and important plus over the other ROMs. This should me mentioned in the OP.
I know that asking for ETA is not welcome on XDA. But one more question concerning updates. What are your plans for that. Your ROM has security in focus. Do you think building monthly updates for Android Security Bulletin?
I don't switch ROMs very often, cos I'm to lazy for this. So when switching to a new ROM I'll like to stick on it for a long time.
jaydee 77 said:
@optimumpro
My post was not to offend you. Thanks for the explanation and clarification. Your points make sense and they are a plus over the other ROMs. This should me mentioned in the OP.
I know that asking for ETA is not welcome on XDA. But one more question concerning updates. What are your plans for that. Your ROM has security in focus. Do you think building monthly updates for Android Security Bulletin?
I don't switch ROMs very often, cos I'm to lazy for this. So when switching to a new ROM I'll like to stick on it for a long time.
Click to expand...
Click to collapse
Usually, once a month. However, this rom is version 1, so, there might be more updates. Definitely, one with January security patches in a few days.
January 8: New release, V2.0
1. January security patches
2. Rom rebuilt with speed flag. As a result, it is larger in size, but should be speedier, because there is less runtime compiling involved
Dirty flash is fine on top of V-1. Download in post #3.
optimumpro said:
January 8: New release, V2.0
1. January security patches
2. Rom rebuilt with speed flag. As a result, it is larger in size, but should be speedier, because there is less runtime compiling involved
Dirty flash is fine on top of V-1. Download in post #3.
Click to expand...
Click to collapse
hotspot fixed in this build?
BrahmaGandhi said:
hotspot fixed in this build?
Click to expand...
Click to collapse
No. - I am using the latest version of TWRP - twrp-3.5.0_9-0-oneplus3
Great to see this hardened flavour of 11 which can even be used with locked bootloader @optimumpro !
As I understand you will have monthly updates also which is great to keep our phone up to date.
One question though; is it possible to use /data/local/userinit.sh scripts with this rom?
Would be a great option to do some system settings without the need of Magisk or other stuff.
Related
My first ROM posted on XDA.
This is a port of Redmi 4X final Chinese version of MIUI 8 developer(7.7.20) .
WHAT are the difference from other Redmi 4X port?
-MIUI 8
-"Stock" kernel for better battery saving and less ANRs
-Full f2fs&Dual Boot Patcher support
-FC fixes
-Power off alarm
-CDMA sim cards support
-more optimizations for better experience
WHY it's MIUI8 not 9?
-there are various of MIUI 9 ports from Redmi 4X.
-MIUI 8 has stopped developing so that I can focus on more optimizations instead of keeping updated as stock version.
-There are always someone who likes to use MIUI 8 instead of 9 for some reasons.
-Camera related files of MIUI 9 has changed a lot .I don't know if the camera bug will be easier to fix on this ROM.
BUGS
-Camera and all related functions except flashlight.
-Fingerprint will not be recognized after next reboot
-VoLTE
DOWNLOAD
https://mega.nz/#!IqJiSZDT!pjhuVpNxy0zJMqwiZSMhPtUpbolUzvVb_GgVZOkZo1M
CREDITS
wadjm81 for part of the files in his rom
Team Hyper for power HAL
daniel.stuart14 for Lineage OS kernel
Xiaomi for the stock MIUI
Me for merging files up into a ROM
And more developers for the files I've used in their ROM
Currently I will not build global versions until major bugs get fixed or when I have enough time.
Some SS:
Thanks, kudos for your efforts
Wow .. ?hope you will keep working on it until it becomes stable..
You think you can merge security patches?
amnher said:
You think you can merge security patches?
Click to expand...
Click to collapse
I didn't .The date is just a number in build.prop and you can modify it if you want,but nothing really happens.
I don't know what the patch level exactly is ,and because porting roms take files from everywhere,so there is no exact date.
No split screen
fxsheep said:
I didn't .The date is just a number in build.prop and you can modify it if you want,but nothing really happens.
Click to expand...
Click to collapse
fxsheep said:
I don't know what the patch level exactly is ,and because porting roms take files from everywhere,so there is no exact date.
Click to expand...
Click to collapse
Those security updates are very important. They are there to pin down those vulnerabilities. Take the Blueborn vulnerability that was pinned down last october 5, 2017 security update. It makes the device more secure aside form SEPolicy. So those arent just numbers to modify on build prop. They mean a whole lot. Well aside that, thank you for this port and hope to see more. People are really treated by MIUI so badly. They boast that they provide updates but those updates like on beta are not necessarily android updates but are just apps updates. Thanks for providing stock nougat.
amnher said:
Those security updates are very important. They are there to pin down those vulnerabilities. Take the Blueborn vulnerability that was pinned down last october 5, 2017 security update. It makes the device more secure aside form SEPolicy. So those arent just numbers to modify on build prop. They mean a whole lot. Well aside that, thank you for this port and hope to see more. People are really treated by MIUI so badly. They boast that they provide updates but those updates like on beta are not necessarily android updates but are just apps updates. Thanks for providing stock nougat.
Click to expand...
Click to collapse
Nothing can be done until xiaomi merges the latest security patches with their sources. And the blueborn vulnerability for now can only be controlled by users, said the miui team in response to some enquiries.
when the camera is fixed?
What abt Splitscreen Mode?
Rvbanna420 said:
What abt Splitscreen Mode?
Click to expand...
Click to collapse
MIUI8 doesn't have this feature but you could enable it by using 3rd party apps since nougat has provided it's API.
fxsheep said:
MIUI8 doesn't have this feature but you could enable it by using 3rd party apps since nougat has provided it's API.
Click to expand...
Click to collapse
Okay thanks
amnher said:
Those security updates are very important. They are there to pin down those vulnerabilities. Take the Blueborn vulnerability that was pinned down last october 5, 2017 security update. It makes the device more secure aside form SEPolicy. So those arent just numbers to modify on build prop. They mean a whole lot. Well aside that, thank you for this port and hope to see more. People are really treated by MIUI so badly. They boast that they provide updates but those updates like on beta are not necessarily android updates but are just apps updates. Thanks for providing stock nougat.
Click to expand...
Click to collapse
Since this ROM is based on los 14 so if it has nothing to do with MIUI Android framework ,there will be no vulnerabilities.
Port miui 8 nougat from redmi 5A it has Snapdragon 425 it may not have bugs while porting
http://en.miui.com/thread-1024345-1-1.html
Robin william said:
Port miui 8 nougat from redmi 5A it has Snapdragon 425 it may not have bugs while porting
http://en.miui.com/thread-1024345-1-1.html
Click to expand...
Click to collapse
Impossible. Believe me.
try porting another
Here's link can you fix voLTE ?
Other works fine in ROM
https://forum.xda-developers.com/xiaomi-redmi-3s/development/7-1-miui-v7-9-7-t3674400
volte working?
Any update?
A7 2018 PORT ROM
You are NOT allowed to use any part of this rom without my permission! All the apps and stuffs contains my sign So Beware!!First you have to treble your device from here
If you appreciate the work i have done, Feel free to buy me a cup of coffee @Paypal
Some information you should know..
This is a full A7 2018 port with Treble android version 8.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
You are not allowed to use this base, if you want to make rom, "DIY"
Any sort of File Kanging will be reported without hesitation.
RULES OF POSTING : READ everything before commenting, And especially the install steps, the rom has been tested thoroughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
FEATURES
- Android 8.0
- Odex System
- Slightly debloated
- Zipaligned
- Optimized for battery and performance
- Full Samsung experience 9.0 without missing vital apps
- And all the goodies Oreo brings
- Based on A750FNPUU1ARK4
- Contains all features from A7 2018 minus hardware specific ones
- All the original features are present (Wifi,Bluetooth, basic camera etc)
Project Treble Rom Features :-
- Full Treble support
- Navigation bar gestures
- AR stickers
- AlwaysOn Display(Aod Touch, Variable brightness)
- BluelightFilter
- BixbyVision
- Samsung DolbyAtmos
- Optimised for A8/A8+
- Many prop and feature tweaks
- DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
- ODM Supported for middleEast , Europe And asian countries
- VoLTE Supported
- Uptodate APN Configration
- Exclusive samsung apps
- And many more additions
Quantum Custom Kernel v1 :-
- Basic Kernel to boot any Rom
- based on A750FNPUU1ARK4 ramdisk
- Full treble ramdisk
- Supports 8.0 and 8.1
- Samsung Security Disabled
- Disabled more knox and logging
- Init.D Support
- Other minor improvments
INSTALL STEPS
ensure you have LATEST TREBLE TWRP
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,VENDOR,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the ROM.ZIP
VERY IMPORTANT
DONT FLASH MAGISK BEFORE FIRST BOOT !
Setup your rom and READ the F.A.Q for more information.
BUGS
Samsung camera video recorder (third party recorder apps work)
CREDITS
- @Griffin98 , @lzzy12 , @somadsul , @TaifAljaloo , @ananjaser1211 for all their support and contribution
Downloads. Changelogs , F.A.Qs below
XDA:DevDB Information
A7 2018 Treble, ROM for the Samsung Galaxy A8 (2018)
Kernel Source Code: https://github.com/prashantpaddune/universal7885
Contributors
prashantp01
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2019-01-30
Created 2019-01-30
Last Updated 2019-01-30
DOWNLOAD
Come hang with us on our chat : Telegram
----------------------------------------------------------------
Treble Rom V1 based on A7 2018 port[LATEST]
Initial Release
Google Drive : Download
----------------------------------------------------------------
CHANGELOG
V1.0
-initial release
FAQ
Good idea to read this F.A.Q While the rom is installing
Q : This rom supports full treble?
A : Yes, this rom support full treble from A7 2018
Q : If I want to flash GSI, what i have to do?
A : If u planned to flash GSI, just flash this base, and then flash your GSI image from twrp
Q : Phone took alot of time to boot, and is very laggy
A : pay attention to install steps and Don't flash Magisk before first boot
Q : I dont see any EDGE panels after installing
A : Simple, I didn't added
Q : How is battery Life ?
A : With some tests and some cycles, it will be better than stock due to optimzations
Q : What to do after the rom is setup ?
A : Go to samsung apps, let the phone update everthing
Good job sir
Just got it set up and... i am treble ready? No way!
There is definitely a positive change in response times and obviously much better use of hardware. Rooted no prob after a long first run and installed after 3 boots. Nice!
mindlery said:
Just got it set up and... i am treble ready? No way!
There is definitely a positive change in response times and obviously much better use of hardware. Rooted no prob after a long first run and installed after 3 boots. Nice!
Click to expand...
Click to collapse
now that you installed treble fully, you can install GSIs from the treble forums but there is one problem with pie GSIs, some GSIs dont work because of some kind of overlays.. here's a list of GSIs that work and dont work
Avoid these GSIs:
ViperOS (Pie)
Pixel Dust (Pie)
PixelExperience (Pie)
Resurrection Remix (Pie)
HavocOS (Pie)
Liquid Remix (Pie)
MIUI (Oreo)
Oxygen OS (Oreo)
XenonHD (Oreo)
GSIs that work:
Phh-Treble (Pie/Oreo)
AOSP Extended (Pie (6.0)/Oreo)
AOSiP (Pie)
Descendant (Pie)
Bootleggers (Oreo)
Resurrection Remix (Oreo)
Lineage OS (Pie)
Ok nice. Kinda all over the place here. This is crazy. Only because i'm going to try all the ones suggested
Oh. My. God. This is AMAZING! My A8 is gone!
mindlery said:
Oh. My. God. This is AMAZING! My A8 is gone!
Click to expand...
Click to collapse
what do you mean by "gone" ?
587.saboor said:
what do you mean by "gone"
Click to expand...
Click to collapse
Ha. So I've probably tried close to 10 gsi's now and while some were decent, there so far has always been something that makes it unreasonable to stick with.
There's a lot more choices, that's for sure. I was really hoping to nail the rr 9.0 but don't have the patience to fix the partition issue.... so now I am looking at a cool glowing arrow with hopes of no vendor error message at the welcome screen. The install was easy. No idea if this glowing arrow is going to get tired and let me have a spin at it....
Can I use it without root? I mean i don't want to have the phoe rooted for some apps. Thank You.
is it normal that my Device now shown as A730F ?
also i noticed a performance decrease
You are NOT allowed to use any part of this rom without my permission! All the apps and stuffs contains my sign So Beware!!
Click to expand...
Click to collapse
Just a reminder that certain parts of Android, including but not limited to the Linux Kernel, are licensed under the GNU GPL and other free/open source licenses. You can't say stuff like that.
Other stuff to take note of:
https://forum.xda-developers.com/android/software/mandatory-xda-developers-gpl-t3663172
https://forum.xda-developers.com/android/software/mandatory-development-forum-rules-t3663179
Not trying to attack you, just pointing out that our efforts go further when people share their work.
Someone_Somewhere said:
Just a reminder that certain parts of Android, including but not limited to the Linux Kernel, are licensed under the GNU GPL and other free/open source licenses. You can't say stuff like that.
Other stuff to take note of:
https://forum.xda-developers.com/android/software/mandatory-xda-developers-gpl-t3663172
https://forum.xda-developers.com/android/software/mandatory-development-forum-rules-t3663179
Not trying to attack you, just pointing out that our efforts go further when people share their work.
Click to expand...
Click to collapse
well kernel is OSS, they have rights to do whatever they want to do with sources, as sources are also linked in the thread. TW isn't OSS, if u Think samsung TW is open sources provide me sources links and i make my rom oss
Someone_Somewhere said:
Just a reminder that certain parts of Android, including but not limited to the Linux Kernel, are licensed under the GNU GPL and other free/open source licenses. You can't say stuff like that.
Other stuff to take note of:
https://forum.xda-developers.com/android/software/mandatory-xda-developers-gpl-t3663172
https://forum.xda-developers.com/android/software/mandatory-development-forum-rules-t3663179
Not trying to attack you, just pointing out that our efforts go further when people share their work.
Click to expand...
Click to collapse
prashantp01 said:
well kernel is OSS, they have rights to do whatever they want to do with sources, as sources are also linked in the thread. TW isn't OSS, if u Think samsung TW is open sources provide me sources links and i make my rom oss
Click to expand...
Click to collapse
So if TW is closed sources i have rights to protect my works from kanging, and quote clearly says `You are NOT allowed to use any part of this rom without my permission! All the apps and stuffs contains my sign So Beware!!` which means u can use but first you have to take my permissions as it's not OSS. Hope you understand and do more research regarding this `
Joseluize said:
Can I use it without root? I mean i don't want to have the phoe rooted for some apps. Thank You.
Click to expand...
Click to collapse
yes, u can root/unroot rom it's upto users
Ztiffn said:
is it normal that my Device now shown as A730F ?
also i noticed a performance decrease
Click to expand...
Click to collapse
Device shown A730F is normal if u want u can change your model name u can change it from device info
also issues regarding performance , there is no such issues. Performance and battery is way better from our stock
prashantp01 said:
yes, u can root/unroot rom it's upto users
Device shown A730F is normal if u want u can change your model name u can change it from device info
also issues regarding performance , there is no such issues. Performance and battery is way better from our stock
Click to expand...
Click to collapse
thank you for the reply
i tried AOSP Phh-Treble today and got again the same feeling compared to this rom, this rom feels a bit "laggy". Don't get me wrong, it's not perma, it happens when i scroll realy quick...maybe it seems to me subjectively like that :cyclops:
atm i got two other issues:
the device didnt't get recognized if i connect it with usb to pc. only in recovery mode.
the developer options crash everytime if i try to open
Ztiffn said:
thank you for the reply
i tried AOSP Phh-Treble today and got again the same feeling compared to this rom, this rom feels a bit "laggy". Don't get me wrong, it's not perma, it happens when i scroll realy quick...maybe it seems to me subjectively like that :cyclops:
atm i got two other issues:
the device didnt't get recognized if i connect it with usb to pc. only in recovery mode.
the developer options crash everytime if i try to open
Click to expand...
Click to collapse
Well if u said aosp phh.... Then its not my rom... Report to phh...what i have made is just vendor for this device
treble roms
i have tried multiple treble roms but this is the only one that doesnt have problems and actually has the samsung apps. i was about to untreble my device until i found this rom. anyways wanted to say thanks and good job. i hope soon there will be a samsung pie rom.
stringman666 said:
i have tried multiple treble roms but this is the only one that doesnt have problems and actually has the samsung apps. i was about to untreble my device until i found this rom. anyways wanted to say thanks and good job. i hope soon there will be a samsung pie rom.
Click to expand...
Click to collapse
These roms are laggy only at the start give it 10 hours they calm down.
Dear Fellow Whyred Users,
I am opening this thread to discuss and get views from you in terms of a Stable & Least Buggy ROM (+ kernel) for Whyred 4GB/64GB device
It is more like an on-going discussion so that all can refer to and ask/share queries/comments/feedback and hence putting in this forum and not in Q&A.
Now to allow focussed discussion sharing some baseline requirements
1) By stable means - no random reboots, no crashes, should be good for daily use with Google Apps, GCam etc
2) Least Buggy - may be some small bugs here and there but should be known in advance (if see that these days for all Custom ROM bugs list is blank even when there are few known bugs reported & hence clearly known)
3) It's OK if the ROM is not having the latest security patches (ideally should be updated) but the key requirement is having balanced (battery backup & performance)
Now, yes Custom ROM offers lot of benefits and it is a boon to come out of MIUI trap as well as allows us to experiment and experience new features. But then it does break a few things here and there and also brings uncertainties.
So, for this thread, ok to even share experiences with MIUI (obviously modded one with all ads/****s removed) as well as the whole plethora of Custom ROM.
Request fellow users to share their experience with at least the following details:
ROM Name & Build Date:
Custom kernel Name & Build Date (if any):
Using Since:
Bugs if any:
Concerns if any:
Overall experience:
Reserved 1
Example for sharing your experience of ROM , pls quote this thread and edit !
PS: Mine is not a recommendation as not happy
ROM Name & Build Date: Xiaomi.eu Stable 10.3.4 (Android 9)
Custom kernel Name & Build Date (if any): Agni Kernel v8.7 Stable EAS
Using Since: May 2020
Bugs if any: None observed
Concerns if any: Lately phone seems very slow, performance below par. Reboot/clean cache helps for few days but again same problem
Overall experience: xiaomi.eu has been a good ROM for last 1.5 years, but with latest build seems to be an issue. Will try fresh format once, else change
Calling out fellow users to spare a few minutes and share their thoughts
@mGforCe @SunilSuni @!codelocker! @Renz1er @zdsvub @Sidgup1998 @Mysteryagr @Weeny1992 @Harry_00s.HS @laska.levin @Cordobes21 @rahimali @drnightshadow @Cirra92 @jokerpappu
Oxygen OS is pretty stable..
NavodLowe said:
Oxygen OS is pretty stable..
Click to expand...
Click to collapse
Thanks, can you pls elaborate a bit more in terms of 4-5 queries below. Helps in having a broad overview, TIA
ROM Name & Build Date:
Custom kernel Name & Build Date (if any):
Using Since:
Bugs if any:
Concerns if any:
Overall experience:
@mGforCe
I was recommended to use PixelExperience which was the first and only custom ROM I have flashed so far since unlocking the bootloader (I only acquired the phone last month). I went with the Pie version of the ROM,
PixelExperience_whyred-9.0-20191211-2037-OFFICIAL
Stock kernel (the one that came with the ROM), no random reboots, no problems, no issues whatsoever.
I might one day or some day flash Omni / Paranoid since I'm a big fan of both and have used them over the years. Maybe you could try those?
@mGforCe
ROM Name & Build Date: Xiaomi.Eu Beta 20.3.26 (Android 9)
Custom Kernel Name & Build Date: Using Stock Kernel (perf 4.4.153-perf+)
Using Since: March 2020 (Since Date of Release)
Bugs: None
Concerns if Any: Well u cannont Run WCC2 Game if its downloaded from another website (other than play store)
Overall Exp.: I've been using Eu ROM Since january 2020 and i haven't seen that much stable ROM till now. Even the MIUI 12 Beta builds are not that stable (They have high RAM Usage). I will strongly recommend this ROM For the best MIUI 11 Exp.
Peace
@mGforCe
ROM Name & Build Date: MIUI 10 [xiaomi.eu Beta 9.9.3] (Android 9)
Custom Kernel Name & Build Date: Stock Kernel (perf 4.4.153-perf+)
Using Since: September 2019 (Since Date of Release)
Bugs: Completely Stable
Concerns if Any: None so far, in nearly 1 year time.
Overall Exp: This has always been my go to ROM, when I want the perfect balance between performance and battery backup (seen last 8 hours of SoT and 40 hours of standby on it)
-- 1 -- One of the biggest reason why I never switched to MIUI 11, was because it was basically MIUI 10 with some extra tidbits that I could live without. The extra animations and updates just made the whole thing slower and consumed more RAM. For me, MIUI 10 last beta does the job perfectly. Good battery life and spare RAM (1.4-1.5 / 3.0 GB).
MIUI 12 has some major animation issues and spare RAM drops to 0.9-1.1 / 3.0 GB; would not advice anyone to update to that version. Waiting for RevOS [MIUI 12 Android 10 port] to get a bit more stable, might switch to that; as they seemed to have a good RAM management.
-- 2 -- I tried out Havoc, Pixel, Lineage and Corvus. Out of all the 4 ROMs; I'd say Corvus is pretty good. Havoc is nice and refined, but in terms of features, Corvus is the better one. But, what stops me from switch to custom roms is the battery life and slight heating issues. It might be due to kernels, but compared to MIUI 10's 5-6% battery consuption, custom roms eat up around 14-15%. Plus, during idle load, MIUI 10 drops down to as low as 32 C while lowest I seen on Corvus was around 35-36 C. They might have gotten better. Might need to test them out again before I can give a final say on it.
-- 3 -- After using MIUI, you get used to few sweet features it offers. Few of them were the volume panel, per app network settings, the app auto start control toggle and lastly the recent app menu. Paranoid Android did a wonderful job of bringing the first 2 feature to custom stock roms; sadly the other two features still remain unavailble. Hopefully someone will be able to create those.
Renz1er said:
@mGforCe
ROM Name & Build Date: MIUI 10 [xiaomi.eu Beta 9.9.3] (Android 9)
Custom Kernel Name & Build Date: Stock Kernel (perf 4.4.153-perf+)
Using Since: September 2019 (Since Date of Release)
Bugs: Completely Stable
Click to expand...
Click to collapse
Thanks @Renz1er for the detailed feedback, very helpful.
Few questions if you may answer:
1) Did you try any subsequent build of Xiaomi.eu MIUI 10 betas and still found this best? Or you never tried any further MIUI 10 or MIUI 11 because of info about extra RAM consumption?
Reason for asking because fellow user @Sidgup1998 suggested Xiaomi.Eu Beta 20.3.26 (MIUI 11) and so checking.
2) Further, you mention RevOS and so checking if you tried any other MIUI Mods like MiRoom etc?
I also googled and found one Official RevOS - tried anytime? ROS-MIUI_RedmiNote5_20.2.26_v11-9.zip
The problem (probably biggest) I've faced with Corvus Os is the mobile data connection. Sometimes if u disconnect and then reconnect, it won't connect until u restart/ Change network type 4g/3g/2g (I used this method).
Otherwise Best Aosp Rom is Corvus as it has my favourite One Plus Navbar Option
mGforCe said:
Thanks @Renz1er for the detailed feedback, very helpful.
Few questions if you may answer:
1) Did you try any subsequent build of Xiaomi.eu MIUI 10 betas and still found this best? Or you never tried any further MIUI 10 or MIUI 11 because of info about extra RAM consumption?
Reason for asking because fellow user @Sidgup1998 suggested Xiaomi.Eu Beta 20.3.26 (MIUI 11) and so checking.
2) Further, you mention RevOS and so checking if you tried any other MIUI Mods like MiRoom etc?
I also googled and found one Official RevOS - tried anytime? ROS-MIUI_RedmiNote5_20.2.26_v11-9.zip
Click to expand...
Click to collapse
-- 1 --
I tried out almost every single beta build and stable build for MIUI 10, and this one particular seems to hit the sweet spot. In terms of features offered from MIUI, performance and stability.
For MIUI 11, I just tried few earlier beta builds and some one of the stable builds. They were stable, but like I said, the ram usage and a bit more system animations kept me away.
For MIUI 12, I tried the very first beta build and the last beta build, both had bugs and issues.
-- 2 --Tried Xiaomi.EU Android 10 Port, Masik X Android 10 Port and RevOS Anroid 10 Port. All 3 of them are more of less very similar, just RevOS has bit more free space because it removes a few of MIUI system apps and a bit more free RAM compared to official Android 9 MIUI 12.
But the main issues with these ports are higher temperature, battery backup being a bit worse and the camera libs might not be whyred's so might see a bit degradation in quality.
Renz1er said:
-- 1 --
I tried out almost every single beta build and stable build for MIUI 10, and this one particular seems to hit the sweet spot. In terms of features offered from MIUI, performance and stability.
...............................
Click to expand...
Click to collapse
Thanks for the detailed revert. Clearly noted cons of going with MIUI 11 and MIUI 12
Now, coming back to MIUI 10, what I gather is that xiaomi.eu beta 9.9.3 is essentially last best of MIUI 10 and then the next weekly beta takes to
MIUI 11
Basis same, I tried searching a bit and came across two further ROMs : Mi-Room and Revolution OS
They both having beta builds, my guess based on same last MIUI 10 weekly beta, the release time is closeby to xiaomi.eu (beta 9.9.3)
xiaomi.eu_multi_HMNote5Pro_9.9.3_v10-9.zip 2019-09-05
Mi-Room RedmiNote5_MIUI_9.9.3_MiRoom_9.0.zip 2019-09-06
ROS-MIUI_RedmiNote5_9.9.21_v10-9.zip 2019-09-11
So, was wondering if worth trying anyone of them?
Also nowhere I see any comparison of Mi-Room vs Xiaomi.eu vs RevolutionOS. Do you have any insights here?
I will suggest Pixel experience plus ROM
Build : June 13
Have been using it from last two days and it's pretty stable
I'm getting 7+ hours of SOT
Play Store is certified so no need to install magisk
Video recording is not working with included Mi Camera but you can resolve it by installing Google Camera
I'm Using Google camera 7.3
Omfg guys ... Can you find more unsupported and buggy ROMs??? ?
Did someone try official LOS 17.1 ???
Almost bug free some minors bugs but ROM is rock solid and you'll get weekly OTA.
Some pixlesh*t buggy ROM is not what my grany can use as sound is crapy as hell and others bugs (WIFI, 4g, volte, etc). I tried many of them except MIUI crapware, adware,etc ROMS.
And I always come back to LOS ROMs official or unofficial.
But on the end, decision is up to you.
Good luck and stay safe.
I've tried LOS, the main concern is the constant Signal Drops which ultimately lead to poor signal reception.
I am having these issues in the latest build ( 29/6)
That's why I always come back to MiUi
Sidgup1998 said:
I've tried LOS, the main concern is the constant Signal Drops which ultimately lead to poor signal reception.
I am having these issues in the latest build ( 29/6)
That's why I always come back to MiUi
Click to expand...
Click to collapse
Sidgup1998 said:
One problem i am facing is sim card error in Banking apps like Gpay,phonepe,paytm.
Whenever i try to register it says please insert sim card , looks like the number is not available,etc.
Anyone else facing the same issue?
(In recent eu builds)
Click to expand...
Click to collapse
Khmm, in almost every of yours posts on XDA forum you have always some weird problems and no one else have and can't be reproduce.... Last quote is from MIUI ROM thread.:laugh:
You are clearly doing something wrong. What firmware do you have? Did you clean install ROM ( advanced wipe -> system, data, cache, dalvik, internal storage)?
Is your persist partition OK?
How is your changing fingerprint going? :laugh: (under LOS 17.1 thread is your answer):good:
You can PM me and I'll try to help you to narrow down your problem. As I said official LOS 17.1 is the most stable ROM at the moment.
Note to all:
Try to avoiding gapps cr*pware. Use FLOSS stores like f-droid and if you still can't live without google spyware apps use Aurora Store (aka google store but its open source) from XDA lab apps store.
And I'm sorry for this off topic post :angel:.
Good luck and stay safe.
@drnightshadow my Eu problem was solved as the new feature implemented by Miui 12 was unknown (they by default changed the imei, simcard response to blank response) and many people were facing the problem
This was a common problem but people didn't knew how to describe
---------- Post added at 03:08 AM ---------- Previous post was at 03:06 AM ----------
Sidgup1998;82999619 [user=1393901 said:
@drnightshadow[/user] my Eu problem was solved as the new feature implemented by Miui 12 was unknown (they by default changed the imei, simcard response to blank response) and many people were facing the problem
This was the last problem I've faced with Eu rom(s)
Click to expand...
Click to collapse
The two roms I've always had a good time with on both my Osprey and whyred has been lineage os and aosp extended other roms which have more features eventually broke for one reason or another . Aosp extended is the perfect mix of features and stability
SunilSuni said:
I will suggest Pixel experience plus ROM
Build : June 13
Have been using it from last two days and it's pretty stable
I'm getting 7+ hours of SOT
Play Store is certified so no need to install magisk
Video recording is not working with included Mi Camera but you can resolve it by installing Google Camera
I'm Using Google camera 7.3
Click to expand...
Click to collapse
Thanks for your feedback. So PE+ Android 10 right? Overall you are happy here
minilandl said:
The two roms I've always had a good time with on both my Osprey and whyred has been lineage os and aosp extended other roms which have more features eventually broke for one reason or another . Aosp extended is the perfect mix of features and stability
Click to expand...
Click to collapse
Thanks mate for feedback. Can you share more details about AEX - which build, android version? Any bugs/issues observed etc?
Not so recent, but the best and most stable for me. Did try almost every whyred ROM from xda , and from other forums also. I always end up getting back to this one, specially when you like MIUI experience. Details attached.
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's not working:
IMS (no volte)
Bixby button currently not set
Instructions:
Make sure twrp by afaneh92 is installed and functional.
Download the latest build (and optionally gapps).
Reboot to recovery
Wipe system, data, and cache (required if you switch from other ROMs)
Flash the latest build, gapps, and magisk.
Reboot
Downloads:
Galaxy S10e Snapdragon (G970U): https://github.com/klabit87/OTA/rel...eage-17.1-20201114-UNOFFICIAL-beyond0qlte.zip
Google Apps: https://opengapps.org/
Reporting Bugs:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred.
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless).
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. For now please report any bug below.
Group:
Join this group for contacting me and bug reporting (typically fast response )
Unlocked Samsung US devices
https://t.me/joinchat/CG3Ojlb0TwDDrN-RY5UqmQ
Also dont forget to hit the thanks button!
Contributors
Thanks to @jrkruse and @afaneh92 for testing initial builds.
ROM Firmware Required: Minimum of Android 10 firmware
Based On: LineageOS
Version Information
Status: Beta
Source:
https://github.com/klabit87/android_device_samsung_beyond0qlte
https://github.com/klabit87/android_device_samsung_sm8150-common
https://github.com/klabit87/android_kernel_samsung_sm8150-common
https://github.com/klabit87/android_vendor_samsung_sm8150-common
Created 2020-11-14
Last Updated 2020-11-14
Reserved
Thanks men!
Wow, great to see that there actually IS a LOS version for Snapdragon users after all, despite all the "impossible"-vibe! I own a Exynos version but still, glad to see this development. Well done!
Well done! Finally!
Can this rom be flashed on G9700 (TGY varient)?
tombbb said:
Can this rom be flashed on G9700 (TGY varient)?
Click to expand...
Click to collapse
I don't really know. But you can try and test it. I've only tested this on a G970U.
I flashed this ROM, but want to know anymore ROM for this device ??? like RR Havc os , LineageOs looks some ugly
Getting support for s10e definitely sounds great, thanks a lot fot the work! What is the typical timeline of merging new devices into the upstream lineageos source? I'd like to go degoogled with microg which is only available for phones that lineageos officially supports. I guess I could compile them both from source myself but then there go the automatic updates.
ldbs said:
Getting support for s10e definitely sounds great, thanks a lot fot the work! What is the typical timeline of merging new devices into the upstream lineageos source? I'd like to go degoogled with microg which is only available for phones that lineageos officially supports. I guess I could compile them both from source myself but then there go the automatic updates.
Click to expand...
Click to collapse
I decided not to bother with official on 17.1 since official Android 11 release from samsung just came out. I'm only waiting on kernel source so as soon as that is released I can work on 18.1. Once everything is stable I can then push to official.
Hi, where is the link for magisk?
and can I install without it?
thanks
Hey there friend ! Good work on bringing Lineage to the last great Compact phone!
May I ask, do you have plans enabling VoLTE ? In a lot of countries VoLTE is a must, otherwise you cannot call.
In my country for example, by end of March all phones without VOLTE won't be able to place calls anymore.
Thanks ahead.
Whenever I flash this, TWRP says its successful but I can only boot into download mode afterwards. Has anyone else had this problem?
SmithShady said:
Whenever I flash this, TWRP says its successful but I can only boot into download mode afterwards. Has anyone else had this problem?
Click to expand...
Click to collapse
I had a lot of difficulty, but eventually got it running. Try downloading and flashing the Android 10 firmware, let it boot up, and then re-flash the Android 10 firmware this time with the TWRP image. Let it do it's thing and reboot system, and then boot into recovery and flash LOS.
To be honest, I'm interested in LOS 18, but running Android 11 firmware with Magisk and a few EdXposed modules is better than LOS 17.
is this a going concern ?
i just almost bought a qualcomm based version but cancelled thinking lineage was a no-go in the american/chinese stock
Hello, I see "volte" is not working. But does Voice over Wifi works ?
Thanks !
paralight said:
Hello, I see "volte" is not working. But does Voice over Wifi works ?
Thanks !
Click to expand...
Click to collapse
No it does not as that is still an ims feature.
Where's a stable LOS 19 for SM-G970U?
I'd like to donate towards a fully working LOS 19 (and later), for beyond0qlte.
@klabit87 would you consider taking up the work then?
Svrmirac said:
I'd like to donate towards a fully working LOS 19 (and later), for beyond0qlte.
@klabit87 would you consider taking up the work then?
Click to expand...
Click to collapse
I’ll begin looking at 19 soon but lineage has not yet merged all of their customizations. It can still be built though. I will post when/if there is an update or for testing. Thanks
View attachment 5737423
We are very excited to announce the beta of Paranoid Android Topaz, based on Android 13.
On the first launch, you’ll notice a clean setup with beautiful wallpapers from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app from the PlayStore.
Our builds are based on the Code Linaro Organization Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Starting from Beta 3, we are unifying the zip for OnePlus 9 and 9 Pro to avoid any confusion and easier development!
Notice
We kindly ask all of you that are in a position to donate anything, to help and support us so we can provide better and faster build releases, as well as increase the download speed of our servers, all looking for your enjoyment.
You can donate on the link below:
Donate
Device-specific issues
You tell me!
Requirements
Make sure you've latest platform tools for Android.
Please be on the latest version of OOS 11 before you install AOSPA. (Flashing firmware through fastboot will also work)
Download Latest
You can also get older beta builds from our website Paranoid Android website
Note: Custom kernels are NOT supported the kernel says it supports PA and GMS is included!
Changelogs for Beta 4
Fixed Alert slider calibration which caused issues with middle and last position
Fixed excessive 5G idle drains.
Fixed AOD not updating.
Updated vibration patterns for alert slider feedback
Set AOD screen brightness same as stock.
Changelogs for Beta 3
Unified builds for OnePlus 9 and 9 Pro.
Switched back to OOS 11 firmware.
Switched to arter97 kernel.
Implement sensor's HAL for Screen Off UDFPS, DT2W and ST2W.
AOD improvements.
Fingerprint improvements.
Update vibrator HAL and drivers from OOS 13.
Disable AOSP's Prevent ringing gesture.
Updated CarrierConfigs.
Update to LA.UM.9.14.r1-21000-LAHAINA.QSSI13.0.
Fix OGG audio playback.
CLEAN FLASH REQUIRED ONLY IF COMING FROM BETA 2.
Beta 3 users can flash beta 4 without wiping their data.
Guide to Unlock/Enable 5G
Keep an eye on our Twitter account, @paranoidaospa, as we will be posting about new features getting included in the release builds, as well as links to betas for those devices that will get them. For more detailed information please have a look at the second post of this thread of each build changelog on the website.
Paranoid Android Topaz flashing
Instructions
Unlock your bootloader, and in bootloader mode follow the next command
fastboot update aospa-topaz-beta-*-image.zip
After the reboot, factory reset the device (only required for the first time you flash Paranoid Android)
Sources
Kernel Source
AOSPA Source
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Download Channel (Telegram)
Paranoid Android Community (Telegram)
Paranoid Android OnePlus 9 Family community (Telegram)
Cheers and #StayParanoid!
Wooh Rom installation was but different can I flash in oos 11 firmware
Any ss?
Vishalcj17 said:
View attachment 5737425
We are very excited to announce the beta of Paranoid Android Topaz, based on Android 13.
On the first launch, you’ll notice a clean setup with beautiful wallpapers from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app from the PlayStore.
Our builds are based on the Code Linaro Organization Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Notice
We kindly ask all of you that are in a position to donate anything, to help and support us so we can provide better and faster build releases, as well as increase the download speed of our servers, all looking for your enjoyment.
You can donate on the link below:
Donate
Device-specific issues
You tell me!
Requirements
Make sure you've latest platform tools for Android.
Please be on the latest version of OOS 12 before you install AOSPA. (Flashing firmware through fastboot will also work
Download
You can always get our Beta builds from our website Paranoid Android website
Note: Custom kernels are NOT supported the kernel says it supports PA and GMS is included!
Changelogs
Keep an eye on our Twitter account, @paranoidaospa, as we will be posting about new features getting included in the release builds, as well as links to betas for those devices that will get them. For more detailed information please have a look at the second post of this thread of each build changelog on the website.
Paranoid Android Topaz released
Instructions
Unlock your bootloader, and in bootloader mode follow the next command
fastboot update aospa-topaz-beta-*-image.zip
After the reboot, factory reset the device (only required for the first time you flash Paranoid Android)
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Download Channel (Telegram)
Paranoid Android Community (Telegram)
Paranoid Android OnePlus 9 Family community (Telegram)
Cheers and #StayParanoid!
Click to expand...
Click to collapse
Hell yeah can't wait to try it
Phoenix47 said:
Already on topaz beta 1 but still getting this update notification.
View attachment 5737741
Click to expand...
Click to collapse
How's performance? Compared to Stag, PEX....etc..
Phoenix47 said:
Performance is good. Geekbench score is also high.
Click to expand...
Click to collapse
does it have auto brightness and sync toggles in quick settings?
gapps included?
Phoenix47 said:
Autobrightness toggle is there and gapps included.
Click to expand...
Click to collapse
thanks for reply,
there are 2 files on GDrive which one to download?
and how to flash ? i see a different method in OP than update from recovery
thanks again
ahmd gom3aa said:
thanks for reply,
there are 2 files on GDrive which one to download?
and how to flash ? i see a different method in OP than update from recovery
thanks again
Click to expand...
Click to collapse
Rename zip to pa.zip. reboot into bootloader "fastboot update pa.zip" let it install, when it returns to bl, factory reset . Boot into aospa. And if there is 2 files lemonade is for reg op9. Lemonadep would of course be the pro model.
Current OOs has to be on both slots prior to installation.
when i click on download link from paranoid website, i see 2 files on gdrive, both for op9, but one is 2.2 gb and the other is 1.67 gb, both are dated 17/10 , so which one to download
ahmd gom3aa said:
when i click on download link from paranoid website, i see 2 files on gdrive, both for op9, but one is 2.2 gb and the other is 1.67 gb, both are dated 17/10 , so which one to download
Click to expand...
Click to collapse
Unsure try. The smaller one might be built without Gapps other with. Someone that knows will have to chime in.
Phoenix47 said:
The one with smaller size can be sideloaded with any recovery. The other one can be flashed from fastboot.
Click to expand...
Click to collapse
boggles the mind why more dont aim for fastboot update implementation. I must be missing a reason why
mattie_49 said:
Unsure try. The smaller one might be built without Gapps other with. Someone that knows will have to chime in.
Click to expand...
Click to collapse
I have tried both files via fastboot and the recovery. Everything boots but i cant sideload magisk and if i attempt to replace boot.img with a magisk flashed variant i made, it fails to boot.
any trick with this i need to be aware of?
love youuuu uuu uu
applyscience said:
I have tried both files via fastboot and the recovery. Everything boots but i cant sideload magisk and if i attempt to replace boot.img with a magisk flashed variant i made, it fails to boot.
any trick with this i need to be aware of?
love youuuu uuu uu
Click to expand...
Click to collapse
Post in thread '[ROM][OFFICIAL][lemonade][11] LineageOS 18.1' https://forum.xda-developers.com/t/rom-official-lemonade-11-lineageos-18-1.4298845/post-86264401
Read back a few and ahead a few posts. This is how I was successfull on last aospa builds.
mattie_49 said:
Post in thread '[ROM][OFFICIAL][lemonade][11] LineageOS 18.1' https://forum.xda-developers.com/t/rom-official-lemonade-11-lineageos-18-1.4298845/post-86264401
Read back a few and ahead a few posts. This is how I was successfull on last aospa builds.
Click to expand...
Click to collapse
nvm i got it. i enabled the settings below when extracting the boot.img and flashed magisk with 24.1 and then upgraded in the OS. basically kitchen sinked the troubleshooting because im so late for work lol.
thank you for the link/info as always.
Edit: Vishalcj17: this is, by far the stablest A13 ive experienced on OP9 ROMs. Everyones been doing great, but it's clear you have a deeper grasp on this whole process than the average maintainer. Loving the support, thank you for bringing PA to OP9
All I will beg and ask for is OOSCAM native support and Google dial AI call screening without the need for separate moduals. Neither are Important, its just honestly the only "issues" i seem to be left with after coming back to A13 again.
Good time, I installed this firmware and ran into a problem: After all the manipulations done, when the system starts up, pressing the screen does not respond, but the side buttons work. Tell me what can be done?
bobensky said:
Доброго времени, Установил эту прошивку и столкнулся с проблемой: После всех проделанных манипуляций при запуске системы на нажатия экран не реагирует, но боковые кнопки работают. Подскажите что можно сделать?
Click to expand...
Click to collapse
try again to install ROM on top. it looks like it has been installed in one slot
imv_9 said:
try again to install ROM on top. it looks like it has been installed in one slot
Click to expand...
Click to collapse
Thank you so much. I flashed it in both slots and it worked
bobensky said:
Good time, I installed this firmware and ran into a problem: After all the manipulations done, when the system starts up, pressing the screen does not respond, but the side buttons work. Tell me what can be done?
Click to expand...
Click to collapse
https://wiki.lineageos.org/devices/lemonade/
Read all the information on this link. It is the official wiki to flash Linage but it can help to follow this for other roms especially if you're facing issues and can't figure out what is wrong this is a good read up. Thanks for the other guy spotting out the Slots.
<Moderator Note>: Thread closed and all links removed due to the missing GPL legal required link to the kernel source code and no response.
@Vishalcj17 if you want to take care of this requirement, please just use the Report button on the OP and let us know when you're ready, then we can unlock the thread.
Thank you,
@roirraW "edor" ehT
roirraW edor ehT said:
<Moderator Note>: Thread closed and all links removed due to the missing GPL legal required link to the kernel source code and no response.
@Vishalcj17 if you want to take care of this requirement, please just use the Report button on the OP and let us know when you're ready, then we can unlock the thread.
Thank you,
@roirraW "edor" ehT
Click to expand...
Click to collapse
@Vishalcj17 Thread has been re-opened on your request. Please add the link to your kernel source within the next three days and advise @roirraW "edor" ehT when accomplished for evaluation. Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator