I just purchased new Honor 6x from BestBuy in US . I tried watching VR videos today with Aura VR headset. The video was constantly shaking. I tried to calibrate the gyroscope using a few apps I could find in the playstore but nothing helped. This is a great phone but gyroscope is really messed up. I tried using Bubble Level and the reading continously fluctuates on a flat surface from 0.2 to 0.6 on both axis.any solution ?
Gyroscope on 6x is just a simulation of magnetometer and accelerometer (just red it somewhere on the forum). Maybe thats the reason why its constantly shaking
Everyone has dat proble... Hope they solve in future updates
The gyroscope worked fine for me before the emui 5 update now it's idk what anymore
Related
Hello,
After clean install Android 5.0 on Nexus 5 I have lost all sensors.
Do you have similar problem?
Is there any solution to fix it?
What app are you using? This looks like a bug in an app, than in Android itself.
I had this problem even before installed any apps. In android l developer preview I didn't have sensors also, so after installed final version of lollipop the first thing I made was check sensors. On kitkat everything worked perfect.
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
i don't have light and proximity sensors too...
i did full wipe and flash stock OTA
hope they will fix it soon
Since upgrading to Lollipop my proximity and light sensor also stops working after a few minutes. It works again after a restart, but only for a few minutes.
I have flashed 4.4.4 again and the problem is not present there. After upgrading to 5.0 again the problem came back.
the apps are the issue here gentlemen.
1.On call as you bring your phone to ear, screen turns off?Proximity working
2.Adaptive brightness enable and use the phone on same brightness settings in bright and dim areas, screen brightness intensity change?Light sensor working.
3.Screen rotates views?Accelerometer working.
4.Play asphalt or any other motion requiring game, car turns?Gyro working.
5.Open maps, get pointing direction?compass working.
6.Use pedometer, counter change?step counter working.
gamer.11 said:
the apps are the issue here gentlemen.
1.On call as you bring your phone to ear, screen turns off?Proximity working
2.Adaptive brightness enable and use the phone on same brightness settings in bright and dim areas, screen brightness intensity change?Light sensor working.
3.Screen rotates views?Accelerometer working.
4.Play asphalt or any other motion requiring game, car turns?Gyro working.
5.Open maps, get pointing direction?compass working.
6.Use pedometer, counter change?step counter working.
Click to expand...
Click to collapse
No sir, it's definitely not the apps in my case. After a restart the light and proximity sensors work as expected, but a few minutes later they stop working. I could confirm this with the Sensor Box app as well as with no's 1&2 in your post.
I noticed it first because my adaptive brightness did not work and the screen did not switch of in call. I only installed Sensor Box to see if the sensors still work, this confirmed that they actually stop working and that it is not a calibration issue because Sensor Box shows no reading from these sensors.
This is definitely an issue with Lollipop because I flashed 4.4.4 again and everything worked fine confirming that it is not hardware, but after once again upgrading to 5.0 the sensors stop working few minutes after the phone starts up.
m4nic4ndroid said:
No sir, it's definitely not the apps in my case. After a restart the light and proximity sensors work as expected, but a few minutes later they stop working. I could confirm this with the Sensor Box app as well as with no's 1&2 in your post.
I noticed it first because my adaptive brightness did not work and the screen did not switch of in call. I only installed Sensor Box to see if the sensors still work, this confirmed that they actually stop working and that it is not a calibration issue because Sensor Box shows no reading from these sensors.
This is definitely an issue with Lollipop because I flashed 4.4.4 again and everything worked fine confirming that it is not hardware, but after once again upgrading to 5.0 the sensors stop working few minutes after the phone starts up.
Click to expand...
Click to collapse
That's interesting, have you tried any other custom roms or kernels based on lollipop? I know that is a long shot or even that best advice but could you, or have you checked on other roms?
SO only your Proximity and light sensor the issue? Or all the other sensors a bust?
gamer.11 said:
That's interesting, have you tried any other custom roms or kernels based on lollipop? I know that is a long shot or even that best advice but could you, or have you checked on other roms?
SO only your Proximity and light sensor the issue? Or all the other sensors a bust?
Click to expand...
Click to collapse
I haven't tried any other Lollipop ROMs, I thought about it and I might actually give it a go to see if the problem persists on other ROMs as well, but I would prefer to have stock Android running on my phone, so I'm really hoping for a fix from Google. I'm on few other threads about the same issue, so I know there's a lot of people with the same problem. I had this on the dev preview as well.
gamer.11 said:
That's interesting, have you tried any other custom roms or kernels based on lollipop? I know that is a long shot or even that best advice but could you, or have you checked on other roms?
SO only your Proximity and light sensor the issue? Or all the other sensors a bust?
Click to expand...
Click to collapse
I have tried Code-Blue kernel as I have heard it's a good one, but the problem is still there. I might try a different ROM in the near future.
For me it is only the Light and Proximity sensors, all other sensors work 100%
Light Sensor & Proximity Sensor Error
m4nic4ndroid said:
I have tried Code-Blue kernel as I have heard it's a good one, but the problem is still there. I might try a different ROM in the near future.
For me it is only the Light and Proximity sensors, all other sensors work 100%
Click to expand...
Click to collapse
The Same Problem For Me As Well, My Light Sensor & Proximity Sensor Arent Working. I have downloaded the Final Image from Google Website for 5.0 hammerhead. But still the problem persists.
Nyk
After I got the Play services (with secure locations) update two days ago my light and proximity sensors are gone too. They will work for a while after reboot, but eventually they die.
All other sensors are working fine and only other updates have been to Skype, SwiftKey and TuneIn Radio.
Edit: I'm on stock OTA, no root and never unlocked the bootloader.
Sent from my Nexus 5 using Tapatalk
So uninstalling the play services update resolve the issue? I'm back to KitKat as without light sensor I find uncomfortable to use the phone. Will await the fix before moving to lollipop..
Sent from my Nexus 5 using XDA Free mobile app
"Clean install" using factory images? I did, no issues here.
It seems to be working until I get a phone call, after that the sensors will die.
Have uninstalled the Play services update now and the phone has been up and working 100% for a little more than 4 hours now. Will try to make a phone call to see if it still works after that.
Sent from my Nexus 5 using Tapatalk
Did you reboot after disabling update?
Sent from my Nexus 5 using XDA Free mobile app
rawimage said:
It seems to be working until I get a phone call, after that the sensors will die.
Have uninstalled the Play services update now and the phone has been up and working 100% for a little more than 4 hours now. Will try to make a phone call to see if it still works after that.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Uninstalling Play Services and Play Store update made no difference here. Problem still persists.
michalnied said:
Hello,
After clean install Android 5.0 on Nexus 5 I have lost all sensors.
Do you have similar problem?
Is there any solution to fix it?
Click to expand...
Click to collapse
Hi I have the same problems . Sensors are working after restarting my phone random time. Also you can read here
Uninstalling Play services didn't do it for me either. Sensors work for approximately 4-5 hours then they die.
Sent from my Nexus 5 using Tapatalk
Installed Play services update again after a few days and now my phone has been running fine for 50 hours with all sensors working 100%.
Sent from my Nexus 5 using Tapatalk
I just purchased new Honor 6x from Amazon in India. I tried watching VR videos today with Aura VR headset. The video was constantly shaking. I did not see such issue with my earlier Honor 6 (no x..). I tried to calibrate the gyroscope using a few apps I could find in the playstore but nothing helped. This is a great phone but gyroscope is really messed up. I tried using Bubble Level and the reading continously fluctuates on a flat surface from 0.2 to 0.6 on both axis.
Is there a way to fix this issue?
-Amit
Ignore this text ...
Ok. Received the replacement phone and it has the same issue.
After talking to Huawei Tech Support, I did, firmware upgrade (though I had the upgraded version already) and factory reset. Nothing seems to be working and my phone still feels earthquake on a flat stable surface.
Is there any non-rooting way to fix this issue? I am being asked by Huawei to take my one-day-old phone to service center...
Went to Service center. They did software reset but no help. They wanted to keep the phone to do hardware testing and I denied - didn't want to have a one-day-old phone opened and played with. I returned the handset. Issue still exists.
Ur phone is not defective
It is rhe problem with all honor 6x devices and not just urs maybe it will be fixed in updates.. Just to let u know Ur device is not defective sadly gyroscope is like that in all 6x
All the Honor 6x's have the same problem because huawei decided to cheap out and use the accelerometers as a virtual gyro. It sucks but i dont use gyro that much, no big deal for me.
Hi all
Has anyone faced the following problem: my watch updated to the latest Wear OS a week ago. And after this all the sensors died - no any single of them is working.
I've googled and tried everything I can - from multiple factory resets and linking watch to another phones to manually enabling app permissions for sensonrs and dev mode.
Nothing worked. Test in Dev mode shows "Fail" for all tests related to sensors.
Any ideas/advice on how to fix this?
koladko said:
Hi all
Has anyone faced the following problem: my watch updated to the latest Wear OS a week ago. And after this all the sensors died - no any single of them is working.
I've googled and tried everything I can - from multiple factory resets and linking watch to another phones to manually enabling app permissions for sensonrs and dev mode.
Nothing worked. Test in Dev mode shows "Fail" for all tests related to sensors.
Any ideas/advice on how to fix this?
Click to expand...
Click to collapse
My Watch 2 sport (4G) got the same issue after 1 year. Sent it to service and got a replacement for free.
Probably a HW issue not related to the SW update....
rettinn said:
My Watch 2 sport (4G) got the same issue after 1 year. Sent it to service and got a replacement for free.
Probably a HW issue not related to the SW update....
Click to expand...
Click to collapse
THanks... My watch is more than 1 year old, AFAIK warranty is over
Anyway - Thanks for advice!
Got exacly the same situation, i got my hands on a LEO-BX9 BT, when i install the older firmware 7.1.1 at the start the steps appear and the heart rate works good, but then it starts making updates and loosing the sensors data, i dont believe it's HW related as lower versions of Android Wear work without a problem. already tried almost every firmware available on XDA and the only one that worked all sensors (briefly before auto update) was sawfish-OWDD.180215.018 can anyone give me some guidelines about this? i am well informed about flashing, rooting etc. but this is new to me. flashing fastboot rom and even that way not beeing able to use the sensors.
EDIT: i know this is a old thread but this is still a beautiful watch and with capabilities to perform as a daily driver.
i came from a mi band 4 looking for more functions even if it costs charging a watch every night.
Ultimate edit: it is definitly hardware, i opened up my watch, used isopropyl alchool to clean up all contacts and it worked again, all sensors are now working except barometric sensor, it seems it had been submerged more that it can handle by the previous owner so it had water damage on it, it is near the microphone and it is unrecoverable unfortunatly. but hey, now you know. if you are having error in heart sensor, acelerometer and such. opening up and cleaning the board and contacts its a good idea. time to open up the drawer and reviving a smartwatch!
dxtremez said:
Got exacly the same situation, i got my hands on a LEO-BX9 BT, when i install the older firmware 7.1.1 at the start the steps appear and the heart rate works good, but then it starts making updates and loosing the sensors data, i dont believe it's HW related as lower versions of Android Wear work without a problem. already tried almost every firmware available on XDA and the only one that worked all sensors (briefly before auto update) was sawfish-OWDD.180215.018 can anyone give me some guidelines about this? i am well informed about flashing, rooting etc. but this is new to me. flashing fastboot rom and even that way not beeing able to use the sensors.
EDIT: i know this is a old thread but this is still a beautiful watch and with capabilities to perform as a daily driver.
i came from a mi band 4 looking for more functions even if it costs charging a watch every night.
Ultimate edit: it is definitly hardware, i opened up my watch, used isopropyl alchool to clean up all contacts and it worked again, all sensors are now working except barometric sensor, it seems it had been submerged more that it can handle by the previous owner so it had water damage on it, it is near the microphone and it is unrecoverable unfortunatly. but hey, now you know. if you are having error in heart sensor, acelerometer and such. opening up and cleaning the board and contacts its a good idea. time to open up the drawer and reviving a smartwatch!
Click to expand...
Click to collapse
Thank you for your advice . I did exactly what you have mentioned and now my smartwatch is working again .
I have tried reinstalling the os, root and unroot. Before the newest update I could get into the debug menu, *#808#, there I could see that the accelerometer is giving faulty data. After the update I can't even get into that menu again.
Seems to be a faulty sensor and something with the software. My facking phone is 2 days old........
Anyone else having this problem? Any ideas?
Yeah autorotate sucks for me. Anytime I'm on YouTube and try to watch in landscape it's hit amd miss and i have to keep moving phone to get it to work
hallo dare said:
Yeah autorotate sucks for me. Anytime I'm on YouTube and try to watch in landscape it's hit amd miss and i have to keep moving phone to get it to work
Click to expand...
Click to collapse
Damn. Sounds bad too.
I noticed this while playing Asphalt8 using the accelerometer to steer. It would work for a bit then get stuck trying to drive me into the side of the road!!!
Thinking it may be a bug in the game, I looked at the raw sensor data using Physics Toolbox Suite and saw the same thing. The sensor outputs sensible data for several seconds, maybe even a couple of minutes. Then the values stop changing for about 12 seconds. The length of time the sensor works for is random but the 'dead time' is always about 12 seconds!
Has anyone found a solution to this? Even a hint as to whether it's a software or hardware problem so I can decide if I should send the phone back or wait for an update.
Thanks
Okay thank God someone else has the same issue. I was wondering what was so wrong for the longest time ?
Extremely annoying issue.
It's a software issue. Confirmed.
When I reboot the phone the issue dissapears. Meaning there is something wrong in the OS that tilts the gyroscope readings. At least there is a workaround... Hope OP fixes it soon
I used an OnePlus 5 for 2 years. Now I bought a 7 Pro. I'm wondering doing a downgrade due to this issue. Incredible how a company like oneplus and a premium phone has a software bug like this and there's still no update yet. Months without an update...
The fingerprint sensor also has a bug... Sometimes it simply doesn't work. The touch stops...
OnePlus! Where are you?
Hi guys love this P50 pro, but i have a problem with the proximity sensor in direct sunligt when hearing Whatsapp voice messages, the screen goes always dark.
Someone other experiencing this problem? Indoors it works just fine. Tried removing cover and screenprotector but nothing changes.
it happens to me that when calling in strong sun the display flashes, while in the room everything is fine
ok i see. do you think it's a software bug or proximity sensor problem?
Delete
cvetican said:
it happens to me that when calling in strong sun the display flashes, while in the room everything is fine
Click to expand...
Click to collapse
I'm experiencing the same issue. If the phone takes some kind of strong direct sunlight the screen start flashing on and off randomly. I did the Huawei Support test inside the phone and all the sensore are ok.
Got a new update yesterday emui 12.0.1.223 i will check again and report back
Ok! i can say that Huawei with the last Emui update 12.0.1.223 FIXED the issue with the screen and specifically with the proximity sensor that was constantly switching on and off the screen when this one gets direct sunlight on it. Yes thanks Huawei