Hi from me.
I had a viruses and flash was really needed.
The tablet is this one:
https://drive.google.com/file/d/0Bxome1ZSCRIaWl92bXgzSHZ1djQ/view?usp=sharing
MT6582 1G RAM 16GB ROM
Have used HDC Galaxy Note 3 N9006 firmware from WWW
Now it does not start and when connect to notebook the MTK USB Port is shown for a seconds and then gone away(in device manager)
If i try to flash again Enable DRAM failed is shown
Please help me
Related
Hi there!
We bough some i9300 phones from a chinese seller, and although we knew they were clones my brother tried to install clockworkmod to manually update the firmware to 4.1.2 ...
Rom manager told him the device was not supported, he selected the i9300 from the list and applied the flash...
... and now he just gets a black loading screen and nothing else...
so I guess the bootloader has been damaged somehow.
with home+voldown+power it displayed a factory menu to test the phone. now it just displays factory mode and freezes there.
with home+volup+power it enters recovery mode and seems to work fine.
I can access it with adb, but don't know how to fix it.
I have the same phone working fine, is there any way to get a backup of the working unit to fix the damaged one or something?
or how can I know what firmware is it using and where could I get it to update it?
it also asks me for update.zip file in sdcard, but when I push a file into sdcard I can't see it in the recovery menu...
shell commands give me an error about something not found.
any idea?
the phone looks likes a i9300, even has "samsung" on the front. supports 2 sims although there's just room for 1 micro sim in the back. came with 32gb microsd too, but that's not the one loaded in recovery.
updated: tried to install cyanogen (i9300 build) version 9 and nightly 10... both no valid ota package.
searched for android 4.1.1 ota rom files, and could only find a samsung leaked one. after trying it produced an error with boot (dota or something like that), and if tried to continue after booting produced failed to verify whole-file signature and the instalation was aborted.
I'm checking the working one to get more details and identify it...
android 4.0.4
cpu abi armeabi-v7a
cpu abi2 armeabi
hardware mt6575
radio unknown
board gt-i9300
host nebula
id imm76d
model gt-i9300
product galaxy s3
external memory 2,06gb
total ram 470mb
cpu armv7 processor rev 10 (v7I)
hardware mt6575
revision 65fb8a00
seria 00000000000 (all zeroes)
frequency 1ghz
screen res 540x960, 240dpi
Looks like the GT-i9300, but also could be like HDC S3 9300...
I tried to download their roms and try to flash them with SP flash tools, but I have no luck... every time I try (installed vcom drivers, open flash tool, load the rom, click download then plug the phone) the phone is recognised, but the device is disconnected after a couple seconds
any idea?
guys, my phone has the same specs of this http://forum.xda-developers.com/showthread.php?t=2244111&page=4 but my phone was dead, and I'm trying to regain it by this method http://forum.xda-developers.com/showthread.php?t=1943442 it connects, but this unknown device showing up, and I've tried installing installed a lot of drive for him, MTK, MTK auto install ... but nothing is working, how do you recognize him, and I wonder if you have any rom I can use for it:
dual Chip
clone S4
Android 4.0.3 (2.3.6 I think)
hello, anyone can help me please ??
i have some problem,my samsung galaxy s4 clone mt6572 5inch is dead (hard brick),
i want to flash my HH to recorvery back, but i forget to backup my rom :'( , then i surfing on internet (needrom,xda dev, china-devices,any many more site) and download and try flash with 20 roms but still fail . i have search on internet for 3 weeks
-on internet my HH is UBIFS system not Ext4.
-my HH still detect on my pc (i mean driver)
anyone have idea ?
my HH description in pic below
help from me
I think I have back up for your phone, and you need this as I can see.
I can send it in zip form if you need it.
navekyo said:
hello, anyone can help me please ??
i have some problem,my samsung galaxy s4 clone mt6572 5inch is dead (hard brick),
i want to flash my HH to recorvery back, but i forget to backup my rom :'( , then i surfing on internet (needrom,xda dev, china-devices,any many more site) and download and try flash with 20 roms but still fail . i have search on internet for 3 weeks
-on internet my HH is UBIFS system not Ext4.
-my HH still detect on my pc (i mean driver)
anyone have idea ?
my HH description in pic below
Click to expand...
Click to collapse
ok flash stock rom with odin.
go to samsung updates dot com or sam mobile dot com to get stock rom...
search google for exact website address.
good luck
I have this model of PHone but is it clone Samsung s4 . I hard to search the firmware or cwm recovery of this model but not found is compatible. Please help me. But is phone now boot loop. Board mtk6589 wet lca, hardware 6572, model gti9500 mtk6589 wet Lca, display Alps jb3 mp.v1.8, android version 4.4.4, opengl es version 2.0, screen size 6.13 Inch, screen resolition pixel 480*854, total ram 449MB, is appear on CPU z. Please help me what firmware or stock rom or cus from for this device.. I don't want is phone brick. Phone now boot loop.
Good Day,
I have a galaxy grand prime duos (sm-g530h) and the phone restarts too often for me to enjoy it particularly when i connect to the internet. I have been trying to search for a solution for a while and this has made me realize that
1. my phone specs is different that advertised; it shows memory as 32GB, 1.8GB RAM instead of 8GB, 1GB RAM
2. I cant get into download mode, i have tried all the combination of keys and other suggestions
3. I was able to flash my device with an MT6572 ROM for J100 using SP flash tool but still have the power off/on issue
I would like suggestions on how to fix the memory as i think that is the main problem
thanks