Related
My pantech p9060 won't start in fastboot mode it just says "s/w upgrading" I'm using volumeup-home-power Can anyone tell me what's going on?
joerichards said:
My pantech p9060 won't start in fastboot mode it just says "s/w upgrading" I'm using volumeup-home-power Can anyone tell me what's going on?
Click to expand...
Click to collapse
is the device rooted??
what are you exactly trying to do?
What is your Purpose of Fast booting??
Pantech P9060 Trying to flash stock rom from recovery.img file
jime1 said:
is the device rooted??
what are you exactly trying to do?
What is your Purpose of Fast booting??
Click to expand...
Click to collapse
Hi Thanks
Yes the device is rooted I figured out that fastboot on my phone is pwr-vol.up-menu so i'm able to start the phone is fastboot mode
What I'm trying to do is restore stock rom using the file recovery.img that someone posted on the web and AIO Flasher The program asks me to select partition so if I select recovery and flash the file will that restore my stock rom?
Pantech P9060 AIO Flasher says no device connected
jime1 said:
is the device rooted??
what are you exactly trying to do?
What is your Purpose of Fast booting??
Click to expand...
Click to collapse
Although i can boot into fastboot aio flasher reports no device detected when I connect it I've installed android sdk platform tools and google usb driver I don't know what drivers I'm missing
joerichards said:
Hi Thanks
Yes the device is rooted I figured out that fastboot on my phone is pwr-vol.up-menu so i'm able to start the phone is fastboot mode
What I'm trying to do is restore stock rom using the file recovery.img that someone posted on the web and AIO Flasher The program asks me to select partition so if I select recovery and flash the file will that restore my stock rom?
Click to expand...
Click to collapse
Hi ! Don't just say Thanks..HIT IT if I helped > :good: . ( in the lower left corner)
K.. Use "usbdeview" to remove all the driver softwares.. and then install the needed drivers.
Also check your data cable (if its older or has a connection problem) (connect data cable on the motherboard usb ports ie behind the cabinet)
and get some screen shots of whatever you are do.. it might be helpful.:good:
So I'm using Elephone P6000 (Aka Just5 Blaster2 as named in Latvia).
I searched many places couldn't find anything.
Tried to open bootloader via fastboot but "fastboot oem unlock" or "fastboot flashing unlock" doesn't work and shows me error
"FAILED (Remote: Unknown command)" But the second option was mentioned on help. Also I didn' t found oem unlock option in dev options.
So post any ways how to root.
Ps My android version is 5.0
Just install SuperSU from Play Store and let it update binary. The phone i factory bootloader unlocked and prerooted.
It can't download su binary because of android 5
It has nothing to do with lollipop, how do you try to do that?
nlooooo said:
It has nothing to do with lollipop, how do you try to do that?
Click to expand...
Click to collapse
It shows: There is no su binary and SuperSU cannot install it. This is a problem!
If you just installed android 5 you have to re root.
It said something like that.
Ok, I didn't have that problem.
Have you tried with Kingroot.
nlooooo said:
Ok, I didn't have that problem.
Have you tried with Kingroot.
Click to expand...
Click to collapse
Yes, I tried every app. Can't you tell how to do it manually or at least help me with the problem I can; t flash custom recovery.
It shows that I have flashed it but I still have old stock recovery. I used fastboot.
Use SP Flash Tools to flash custom recovery. You can find TWRP recovery on needrom site, and you have a lot of tutorials how to use SP Flash Tools.
It doesn't work. I turned phone off and on and still just stands still and does nothing.
In which mode I have to turn phone on?
I used stock ROM text and carliv recovery to flash.
To use Flash Tool you need to turn of the phone, remove the battery, press download button in tool and then connect your phone, not turning it on. I got an error trying to flash recovery with Flash Tool, but it's not a real error, phone simply disconnected from PC before it checks if the flash was successful.
Nothings happens Just shows "Super Phone flash tool(Runtime trace mode).
I did everything I need, connected via usb with no battery in phone.
I have phone normal and adb drivers. Meh.
Have you even red some tutorial how to use SP Flash Tool?
Try with tool and tutorial from here:
http://bbs.elephone.hk/thread-1037-1-1.html#.Vryb6fIrK01
As I told you, you need to start Flash tool, select rom to flash (scatter file), in your case to deselect all partitions, select custom recovery, click on download and then to connect phone to PC. It's all written in tutorial, all you need is to read.
I have the same problem,this phone seems to be unrootable and without the possibility to flash a costum recovery,help me please,MMI TEST on the device appears everytime I reboot phone and I launch an app so I want costum recovery to manually root and remove this system app,HELP PLEASE.
Custom recovery flashing and rooting your phone are advanced user activities, if you can't learn how to use SP Flash Tool you shouldn't try to do it.
nlooooo said:
To use Flash Tool you need to turn of the phone, remove the battery, press download button in tool and then connect your phone, not turning it on. I got an error trying to flash recovery with Flash Tool, but it's not a real error, phone simply disconnected from PC before it checks if the flash was successful.
Click to expand...
Click to collapse
Tell me all drivers what I need for SP Flash tool.
LV_User said:
Tell me all drivers what I need for SP Flash tool.
Click to expand...
Click to collapse
As I already posted you have it all here:
http://bbs.elephone.hk/thread-1037-1...l#.Vryb6fIrK01
For Win 8-10 you need to disable driver signature verification.
nlooooo said:
As I already posted you have it all here:
http://bbs.elephone.hk/thread-1037-1...l#.Vryb6fIrK01
For Win 8-10 you need to disable driver signature verification.
Click to expand...
Click to collapse
Broken link, nothing writen there.
LV_User said:
Broken link, nothing writen there.
Click to expand...
Click to collapse
How about this one?
http://bbs.elephone.hk/thread-1037-1-1.html#.VPQ3RPRAWk4
And here you can find the latest stock rom:
http://bbs.elephone.hk/forum.php?mod=viewthread&tid=5486&extra=page=1&ordertype=2#.Vr4BZPIrK02
nlooooo said:
How about this one?
http://bbs.elephone.hk/thread-1037-1-1.html#.VPQ3RPRAWk4
And here you can find the latest stock rom:
http://bbs.elephone.hk/forum.php?mod=viewthread&tid=5486&extra=page=1&ordertype=2#.Vr4BZPIrK02
Click to expand...
Click to collapse
Wizard failed to install 6 (Probably all) drivers.
Google Inc. (WinUSB) AndroidUsbDeviceClass (12/06/2010 4.0.0000.00000)
MediaTek Inc. (wdm_usb) Ports (09/11/2014 3.0.1437.1)
MediaTek (Modem) Modem (05/26/2014 3.0/1422.1)
MediaTek Inc. Net (07/14/2011 1.1129.00)
MediaTek (wdm_usb) Ports (05/26/2014 3.0.1422.1)
Microsoft (WUDFRd) WPD (02/22/2006 5.2.5326.4762)
All have error "Install failed"
(And why the hell I need stock rom)
LV_User said:
Wizard failed to install 6 (Probably all) drivers.
Google Inc. (WinUSB) AndroidUsbDeviceClass (12/06/2010 4.0.0000.00000)
MediaTek Inc. (wdm_usb) Ports (09/11/2014 3.0.1437.1)
MediaTek (Modem) Modem (05/26/2014 3.0/1422.1)
MediaTek Inc. Net (07/14/2011 1.1129.00)
MediaTek (wdm_usb) Ports (05/26/2014 3.0.1422.1)
Microsoft (WUDFRd) WPD (02/22/2006 5.2.5326.4762)
All have error "Install failed"
(And why the hell I need stock rom)
Click to expand...
Click to collapse
What Windows do you use?
You need stock rom because of the scatter file.
can some one please help me ...:crying::crying::crying:
What happen?
use EMMA ou SEUS (windows) or sony bridge (mac) to repair phone
e3 d2202 wont connect into flash
vincy009 said:
What happen?
Click to expand...
Click to collapse
hello im new
i have xperia e3 d2202 and now stuck on logo
i tried flashing but fails,, my phone wasnt recognized in my pc (The LED lights Green but nothing happens).
The phone connects in Fastboot(with blue LED) and is recognized in Flashtool
can u help me ?
luci morningstar said:
hello im new
i have xperia e3 d2202 and now stuck on logo
i tried flashing but fails,, my phone wasnt recognized in my pc (The LED lights Green but nothing happens).
The phone connects in Fastboot(with blue LED) and is recognized in Flashtool
can u help me ?
Click to expand...
Click to collapse
yeah flash it trough flashtool if its detecting in flashtool its easy check tutorial here or Google it
vincy009 said:
yeah flash it trough flashtool if its detecting in flashtool its easy check tutorial here or Google it
Click to expand...
Click to collapse
yes i have done
i follow instruction how to flash xperia e3 d2202.
I've already downloaded what needed ( file .ftf, drivers, and flashtool)
i use flashtool 0.9.18.6 version
when i press volume - then connect usb cable , the green led indikator turn on but no respond and not recognize on my pc
if i press volume +, my pc recognize it and at fastboot mode
plis help me
luci morningstar said:
yes i have done
i follow instruction how to flash xperia e3 d2202.
I've already downloaded what needed ( file .ftf, drivers, and flashtool)
i use flashtool 0.9.18.6 version
when i press volume - then connect usb cable , the green led indikator turn on but no respond and not recognize on my pc
if i press volume +, my pc recognize it and at fastboot mode
plis help me
Click to expand...
Click to collapse
Press Win key+R, type devmgmt.msc and press enter.
You will see the list of devices connected to your PC. If you connect your phone and your PC recognizes it, the list will refresh.
Try to see if the list refreshes when you put your D2202 into flash mode (with the green LED).
If it refreshes, look if a new device has appeared in any menu.
rmnhg said:
Press Win key+R, type devmgmt.msc and press enter.
You will see the list of devices connected to your PC. If you connect your phone and your PC recognizes it, the list will refresh.
Try to see if the list refreshes when you put your D2202 into flash mode (with the green LED).
If it refreshes, look if a new device has appeared in any menu.
Click to expand...
Click to collapse
thanks for advice
still wont connect
green led has turn, but my pc or even in device manager still no respond
its hardware problem ??
luci morningstar said:
thanks for advice
still wont connect
green led has turn, but my pc or even in device manager still no respond
its hardware problem ??
Click to expand...
Click to collapse
Maybe but I don't know becouse if USB doesn't work fastboot mode wouldn't connect, but it is connecting.
You have to flash a rom through fastboot mode, so you need to find system.img and boot.img from stock rom of a D2202 (unfortunately I have D2203 variant so I can't backup my phone, but I can help you findind the files on XDA) and flash it though flash tool.
You can also try to download an ADB toolbox and run the command:
fastboot erase userdata
(this command will remove all your apps' data but can fix your issue)
rmnhg said:
Maybe but I don't know becouse if USB doesn't work fastboot mode wouldn't connect, but it is connecting.
You have to flash a rom through fastboot mode, so you need to find system.img and boot.img from stock rom of a D2202 (unfortunately I have D2203 variant so I can't backup my phone, but I can help you findind the files on XDA) and flash it though flash tool.
You can also try to download an ADB toolbox and run the command:
fastboot erase userdata
(this command will remove all your apps' data but can fix your issue)
Click to expand...
Click to collapse
flash via fastboot ? tell me how to do that ...
ill try, thnks you
luci morningstar said:
flash via fastboot ? tell me how to do that ...
ill try, thnks you
Click to expand...
Click to collapse
Try these steps
Follow this guide to install ADB toolkit.
Then open Sony Flashtool and select the XF icon.
Find Xperia E3 and select D2202 variant. In the right panel you will see a lot of entries with countries and telephone companies, select one and click in the field of "Available firmware:". Download the rom.
When it finishes, close XperiFirm. Click on thunder icon, select Fastboot mode, connect your phone off with vol + pressed (blue LED) to the PC and then press on Select system to Flash. It will ask for a sin file. You have to select a system_....sin, which is in C:\Users\(your user profile folder)\.flashtool\firmwares\Downloads\D2202_...\
and let process finish.
Then press on Select kernel to Flash and select, in the same folder as before, a file called kernel_....sin
When it finishes you can disconnect your pone and try to power it on.
I have a Xperia E3 D2212 and I made the whole process, the problem is that I could not increase the storage memory and FlashTools no longer recognizes my cell phone as a D2212, it recognizes as a D2203, this is because it changed the Kernel in TWRP . Would you like to go back to the Original Kernel ??
Hello,
I have MIX 3 Chinese version, unlocked bootloader, flashed latest global. Fine
For security purposes, tried to lock bootloader with fastboot - I knew it may be risky- now the device is in Mi recovery 3, refused to reboot even after erase data.
How to bring it back to life.
Thanks
Use the XiaoMiTool V2.
Google it
Can you enter fastboot mode?, If yes use mi flash and flash original chinese rom.
GVN.Gallus said:
Can you enter fastboot mode?, If yes use mi flash and flash original chinese rom.
Click to expand...
Click to collapse
Yes I can enter fastboot. Even I check bootloader status now locked.
Could you refer a link where all the process is explained? I am not conversant with mi flash.
visit https://www.xiaomitool.com/V2/ and good luck
Nakbleu said:
Yes I can enter fastboot. Even I check bootloader status now locked.
Could you refer a link where all the process is explained? I am not conversant with mi flash.
Click to expand...
Click to collapse
Follow instruction here, make sure to download lastest Miflash and correct rom, for fastboot rom use mifirm.net
grandman1701 said:
visit https://www.xiaomitool.com/V2/ and good luck
Click to expand...
Click to collapse
XiaoMiTool V2 won't be able to unbrick your device in the cases "This MIUI Version can't be installed on this device" error
Nakbleu said:
Yes I can enter fastboot. Even I check bootloader status now locked.
Could you refer a link where all the process is explained? I am not conversant with mi flash.
Click to expand...
Click to collapse
Fastboot is fairly simple. Download the latest Chinese from from miui.com, unzip it, connect your device in fastboot mode, and run the flash_all.bat file. It will take a while and the command prompt window will close when it is finished and your device will reboot.
jcsww said:
Fastboot is fairly simple. Download the latest Chinese from from miui.com, unzip it, connect your device in fastboot mode, and run the flash_all.bat file. It will take a while and the command prompt window will close when it is finished and your device will reboot.
Click to expand...
Click to collapse
I am downloading the ROM.
Please can provide step by step instructions?
My understanding is to:
1. copy the rom in minimal fastboot directory
2. unzip all files in that same directory (or should I create new one?)
3. Execute the command below:
fastboot flash_all.bat
By the way, can I use fastboot with locked bootloader?
Thanks again
Nakbleu said:
I am downloading the ROM.
Please can provide step by step instructions?
My understanding is to:
1. copy the rom in minimal fastboot directory
2. unzip all files in that same directory (or should I create new one?)
3. Execute the command below:
fastboot flash_all.bat
By the way, can I use fastboot with locked bootloader?
Thanks again
Click to expand...
Click to collapse
If you have ADB installed system wide, then it doesn't matter where you unzip the full image to. The best way to have ADB installed system wide is through this method.
You don't need to type anything. Just open the folder the ROM was decompressed in, right click the flash_all.bat, and run it as administrator with your device connected in fastboot mode. It will literally do everything else.
jcsww said:
If you have ADB installed system wide, then it doesn't matter where you unzip the full image to. The best way to have ADB installed system wide is through this method.
You don't need to type anything. Just open the folder the ROM was decompressed in, right click the flash_all.bat, and run it as administrator with your device connected in fastboot mode. It will literally do everything else.
Click to expand...
Click to collapse
I unzip the rom using 7zip, but couldn't find flash_all.bat file!
Nakbleu said:
I unzip the rom using 7zip, but couldn't find flash_all.bat file!
Click to expand...
Click to collapse
Did you install ADB 1.4.3 from the thread linked to? Do you have your device connected to a USB 3 port or USB 2 port? Are you using the cable that came with your device to flash it? Were you booted into the bootloader when trying to flash?
Edit: Read that post wrong. You need to download the fastboot version. You can't flash the TWRP image using fastboot.
jcsww said:
Did you install ADB 1.4.3 from the thread linked to? Do you have your device connected to a USB 3 port or USB 2 port? Are you using the cable that came with your device to flash it? Were you booted into the bootloader when trying to flash?
Edit: Read that post wrong. You need to download the fastboot version. You can't flash the TWRP image using fastboot.
Click to expand...
Click to collapse
Yes I did all that.
I am getting error: Erase is not allowed in lock state.
Any workaround please?
re-unlock the device. it's locked right now.
erbsenmatsch said:
re-unlock the device. it's locked right now.
Click to expand...
Click to collapse
Won't be possible with the Mi unlock software as the phones been wiped - no account, no OEM allowed ticked etc.
in that case, your only hope is: sending it back to china
where did you buy it?
erbsenmatsch said:
in that case, your only hope is: sending it back to china
where did you buy it?
Click to expand...
Click to collapse
In UK. Gray import. I really don't understand why a manufacturer should let this be possible. Why not just make it unlockable with global rom? This will avoid such unwanted situation for everybody. Pissed off by Xiaomi
Hello,
There is any way for unlocking bootloader and rooting the device Motorola Moto E6s XT2053-2 (Fiji) ?
I can allow oem unlock on develop settings. But fastboot says oem unlock doesn't exist and I can't flash anything.
:-(
Thank you very much
try to downgrade for the fist version of fiji firmware and put this command via fastboot
fastboot flashing unlock_critical
it worked with E6+
raphable said:
try to downgrade for the fist version of fiji firmware and put this command via fastboot
fastboot flashing unlock_critical
it worked with E6+
Click to expand...
Click to collapse
how did you downgrade with unlocked bootloader?
VD171 said:
how did you downgrade with unlocked bootloader?
Click to expand...
Click to collapse
install flash tool, and download the oldest rom for fiji from lolinet mirrors, then, extract the rom and power off your device, open flash tool and select the scatter file from the stock, press the download button. In the device, press volume down and connect to the computer, then, if flashed successfully, go to fastboot and run the command
raphable said:
install flash tool, and download the oldest rom for fiji from lolinet mirrors, then, extract the rom and power off your device, open flash tool and select the scatter file from the stock, press the download button. In the device, press volume down and connect to the computer, then, if flashed successfully, go to fastboot and run the command
Click to expand...
Click to collapse
which DA file did you use? also my oldest rom is 288.13, pretty much factory stock for my phone region but fastboot commands are still disabled
VD171 said:
Hello,
There is any way for unlocking bootloader and rooting the device Motorola Moto E6s XT2053-2 (Fiji) ?
I can allow oem unlock on develop settings. But fastboot says oem unlock doesn't exist and I can't flash anything.
:-(
Thank you very much
Click to expand...
Click to collapse
Here is instruction for e6 plus, i think for e6s it might work. I want try this later.
Stock firmwares can take here
Mortyk said:
Here is instruction for e6 plus, i think for e6s it might work. I want try this later.
Stock firmwares can take here
Click to expand...
Click to collapse
Thanks, I will try this !
VD171 said:
Thanks, I will try this !
Click to expand...
Click to collapse
Link to fitmware little incorrect.
I pasted link for 2053-2, but in my phone show 2053-1.
Here is for 2053-1.
Waiting for your report on the successful operation.
VD171 said:
Thanks, I will try this !
Click to expand...
Click to collapse
So you try unlock the phone or no?
well i tried rooting it by flashing an empty vbmeta and a patched boot.img and soft bricked my device because there's no way to unlock the bootloader with the current fw
gonna need to reflash my preloader but the DA isn't letting me flash anything to that partition
luridphantom said:
well i tried rooting it by flashing an empty vbmeta and a patched boot.img and soft bricked my device because there's no way to unlock the bootloader with the current fw
gonna need to reflash my preloader but the DA isn't letting me flash anything to that partition
Click to expand...
Click to collapse
If you try to flash any modified/patched partition to an unlocked device, certainly you will brick it.
VD171 said:
If you try to flash any modified/patched partition to an unlocked device, certainly you will brick it.
Click to expand...
Click to collapse
it's been a while and i've unbricked my device and now am trying to unlock the bootloader
anybody know how to enter brom mode on these fijis? if thats possible, this tool can unlock bootloaders by patching the seccfg partition: https://github.com/bkerler/mtkclient
luridphantom said:
it's been a while and i've unbricked my device and now am trying to unlock the bootloader
anybody know how to enter brom mode on these fijis? if thats possible, this tool can unlock bootloaders by patching the seccfg partition: https://github.com/bkerler/mtkclient
Click to expand...
Click to collapse
You can't.
I tested it, but it gave an error: Preloader - [LIB]: Status: Handshake failed, retrying...
br.rafael.venancio said:
I tested it, but it gave an error: Preloader - [LIB]: Status: Handshake failed, retrying...
Click to expand...
Click to collapse
yea i can enter meta mode so far but nothing else. even the usual volume down and usb plug in that works in spft doesn't work for mtkclient. must be some authentication required to enter brom for flashing
luridphantom said:
yea i can enter meta mode so far but nothing else. even the usual volume down and usb plug in that works in spft doesn't work for mtkclient. must be some authentication required to enter brom for flashing
Click to expand...
Click to collapse
You can't.
Hi! I am Ukraine bad english. I am unlock (not pay dongle, just pc) this smart moto e6s 4/64 (and this very simple for 2/32) Now, i am try in hex edit lk for remove 5 sec and message, flash lk from e6plus no try. info for edit lk for remove 5 sec and message? help. and help how root. (also i am unlock meizu m3 max, not pay dongle, just pc, flash preloader, reset pin frp work)
severagent007 said:
Hi! I am Ukraine bad english. I am unlock (not pay dongle, just pc) this smart moto e6s 4/64 (and this very simple for 2/32) Now, i am try in hex edit lk for remove 5 sec and message, flash lk from e6plus no try. info for edit lk for remove 5 sec and message? help. and help how root. (also i am unlock meizu m3 max, not pay dongle, just pc, flash preloader, reset pin frp work)
Click to expand...
Click to collapse
you used a pay dongle or what free tool to unlock? mtkclient doesnt work for me but i know the dongles can unlock the e6s
to root, go to lolinet and find your firmware version there, unzip and extract boot.img and patch with magisk. flash with fastboot
luridphantom said:
you used a pay dongle or what free tool to unlock? mtkclient doesnt work for me but i know the dongles can unlock the e6s
to root, go to lolinet and find your firmware version there, unzip and extract boot.img and patch with magisk. flash with fastboot
Click to expand...
Click to collapse
its very simple) from fastboot anl 29.137 firmware. Thanks i am try patch boot. fastboot still not flash any part but spft now flash editing lk vbmeta/ vbmeta i flash empty and lk with remove mess orange state. But i am dont flash twrp - i am dont know adress partition - in scatter not find him. Now i am search why its did
severagent007 said:
its very simple) from fastboot anl 29.137 firmware. Thanks i am try patch boot. fastboot still not flash any part but spft now flash editing lk vbmeta/ vbmeta i flash empty and lk with remove mess orange state. But i am dont flash twrp - i am dont know adress partition - in scatter not find him. Now i am search why its did
Click to expand...
Click to collapse
ok i will try when i get home. maybe i cant downgrade to that version and they removed it like with the e6
posted the lolinet link in the other thread. the scatter file is in there