Database Info

After rooting my phone and then again factory resetting it, I cannot access my phone?

I rooted my phone using kingroot and after that to gain some extra space started deleting files.In that course I deleted apps like webview and keyboard too was deleted automatically. After getting annoyed by this kind of problem I took a decision to "reset factory settings". When my phone got reset those missing files were still not there.So after selecting my language when I tried to connect to my Wifi then the keyboard didn't load. I removed the password of the wifi then also it would not move an inch further i.e. it wont connect to network. So,I am kind of stuck her. Cant flash Rom because USB Debugging and OEM are not enabled.
Is there any way out?
Help.

Bhanu Rajput said:
I rooted my phone using kingroot and after that to gain some extra space started deleting files.In that course I deleted apps like webview and keyboard too was deleted automatically. After getting annoyed by this kind of problem I took a decision to "reset factory settings". When my phone got reset those missing files were still not there.So after selecting my language when I tried to connect to my Wifi then the keyboard didn't load. I removed the password of the wifi then also it would not move an inch further i.e. it wont connect to network. So,I am kind of stuck her. Cant flash Rom because USB Debugging and OEM are not enabled.
Is there any way out?
Help.
Click to expand...
Click to collapse
Try to install the stock rom.

debaadak said:
Try to install the stock rom.
Click to expand...
Click to collapse
Can you tell me the steps involved cause I tried doing that.

Bhanu Rajput said:
Can you tell me the steps involved cause I tried doing that.
Click to expand...
Click to collapse
Have you flashed any other ROM yet? Try to flash Resurrection Remix 5.8.3, gapps aroma variant.
https://sourceforge.net/projects/resurrectionremix/files/jalebi/
Please let me know if it helps.

Bhanu Rajput said:
Can you tell me the steps involved cause I tried doing that.
Click to expand...
Click to collapse
Goto website www.firmwarefile.com
Select Your Phone
Download file Version 1
Extract using 7zip
Install drivers and ets tool.
Read instructions in readme.txt
Flash using ets tool.
Done
Don't root again with Kingoroot
Use adb commands for unlocking bootloader (Note: unlocking bootloader is a necessary step) and install custom recovery ex. Twrp
Flash SuperSU.zip ( download it from official website)
Now your phone is rooted properly.
You can flash kernel,roms, modules etc through twrp.
See XDA for full rooting guidelines
Hit thanks if you resolved it with this way.

A problem in this method.
nischait said:
Goto website
Select Your Phone
Download file Version 1
Extract using 7zip
Install drivers and ets tool.
Read instructions in readme.txt
Flash using ets tool.
Done
Don't root again with Kingoroot
Use adb commands for unlocking bootloader (Note: unlocking bootloader is a necessary step) and install custom recovery ex. Twrp
Flash SuperSU.zip ( download it from official website)
Now your phone is rooted properly.
You can flash kernel,roms, modules etc through twrp.
See XDA for full rooting guidelines
Hit thanks if you resolved it with this way.
Click to expand...
Click to collapse
Okay so what problem I am facing is that I don't have my USB debugging on and I also can't switch it on because I can't enter settings bypassing the staring screen. And I can bypass them because I dont have webview& keyboard apps installed.
Is there any method in which there is no need to switch any thing on from the phone.
And yes my laptop is connecting to my phone. I made that sure.
I also did fastboot but under adb devices my device is not listed.

Bhanu Rajput said:
Okay so what problem I am facing is that I don't have my USB debugging on and I also can't switch it on because I can't enter settings bypassing the staring screen. And I can bypass them because I dont have webview& keyboard apps installed.
Is there any method in which there is no need to switch any thing on from the phone.
And yes my laptop is connecting to my phone. I made that sure.
I also did fastboot but under adb devices my device is not listed.
Click to expand...
Click to collapse
Your device must be shown in device manager. Make sure it is in device manager. Try to install adb drivers from another site.
See device manager and tell me when you connects your device what happens ( Your device shown as )
I send you guide for flashing stock ROM in your phone.
First download and then install all drivers without attaching phone.
If not done try to remove all older installations and then again install drivers from given Firmware folder.
I checked it when I install drivers it shows potential harmful for my PC on windows 7.
Then click it install anyways
After 2-3 retires drivers installed properly.

ulefone Power 2 Development and Support

Ulefone power 2 Development and Support-
Basic Device Details-
Display- 5.5 inch
OS- android 7.0 Nougat
Chipset - MT6757T
RAM- 4GB
Disclaimer-
Code:
i am not Responsible for any damage to Your Device..
official Firmware-
https://drive.google.com/drive/folders/0B8NC4kBpjQhYV1lWOEtYWThRRms
twrp Recovery-
https://drive.google.com/open?id=0B1aXJDZjE8bvM0h0aTVEOEdBS1U
SP Flash tools and Driver-
https://drive.google.com/folderview?id=0B6O3B5Tc7Wr9ZzgxQmcyNmNoX00
Magisk-
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
No verity opt-Encrypt-
https://www.androidfilehost.com/?fid=673368273298927206
extras-
Greenify for Battery-
http://m.hiapphere.com/apk-com.oasisfeng.greenify
Build.prop tweaks-
[Must Backup official before try-
https://forum.xda-developers.com/attachment.php?attachmentid=4248841&stc=1&d=1503381757
Guide-
Flash Firmware-
1. Install Vcom Driver Run SP flash tools, Load Scatter File , Check Everything and then click Download, as soon as connect your Switched off Phone.
Flash twrp-
Code:
fastboot oem unlock
fastboot flash recovery recovery.img
or use inbuild script
if you have Scatter then you can Flash with SP flash tools.
Root-
flash Magisk via twrp or you can also use Supersu 2.78XX.
Mod-
Will be added Soon....:good:
version- 3.00XX
Credit- XN Logos
Donation- https://Paypal.me/droiddeveloper
Please Don't create mirror Without the Link of This Page.

I tried it but it didn't work. twrp is installed but my phone doesn't boot into the system anymore. When I reboot it goes back to Twrp and then the touchscreen doesn't work anymore. I have to connect an USB-mouse. But it still doesn't boot.
When I try to flash or wipe sth it says "unable to mount"
I had to flash the original software again with SP Flash Tools

No flash No verity encrypt to Disable boot verification

XN Logos said:
No flash No verity encrypt to Disable boot verification
Click to expand...
Click to collapse
sorry but what does that mean?

So i used your TWRP Recovery, normally it should work and it does but why is my data shown as 0.
Thank you too. Please help

where is the scatter file?

gasperoni said:
where is the scatter file?
Click to expand...
Click to collapse
no Scatter included use Fastboot, or You can take scatter from ROM.

Ok but where is the recovery image file to flash via SP Flash Tools? I only see an exe-file saying "flash recovery" and a 12.6MB file called "rk" but it's shown me as a mp4-file

it worked!!! Thank yoU!! @gasperoni, just start "Flash Recovery.exe" and do what is written in the window. It's really easy.

i have include a Script which have ability to unlock bootloader and then flash twrp, if you flash with SP flash tool your Device not bootup because bootloader is Loacked. so Simply use Given Instruction Not SP flash.

any custom ROM

non yet

hm..i install twrp with your "flash recovery.exe", my phone reboots, i have to press "volume up" to unlock my bootloader. then trwp starts.
until here everything works fine. But when i am installing Superuser and restart my phone, it writes sth like "orange mode, your phone is untrusted" and just boots into twrp, touchscreen isnt working. So i have to flash it again, but i didnt achieve twrp of course :S

Unlucky25 said:
hm..i install twrp with your "flash recovery.exe", my phone reboots, i have to press "volume up" to unlock my bootloader. then trwp starts.
until here everything works fine. But when i am installing Superuser and restart my phone, it writes sth like "orange mode, your phone is untrusted" and just boots into twrp, touchscreen isnt working. So i have to flash it again, but i didnt achieve twrp of course :S
Click to expand...
Click to collapse
Same issue for me.
I tried twice to install the recovery with the .exe file. Both times I bricked the phone. Why?

kylebutler said:
Same issue for me.
I tried twice to install the recovery with the .exe file. Both times I bricked the phone. Why?
Click to expand...
Click to collapse
Same result here. But how did you get the factory rom to flash on the phone? I first got some checksum error and had to find a checksum generator and now the silly multiport flash software says:
" Warning maybe error as follows: 1 com port number repetitive or invalid 2 brom and preloader have the same comport number! Please modify them in INI file or scan again."
I think i did everything correctly (installed the drivers and stuff as it says on the ulefone download page) but i haven't flashed any mediatek devices in a long time and i would be very thankful if someone can tell me what i'm doing wrong. I don't mind it getting bricked as i know that is always a risk with mediatek, but i do need to be able to flash the stock rom.

ml11ML said:
Same result here. But how did you get the factory rom to flash on the phone? I first got some checksum error and had to find a checksum generator and now the silly multiport flash softwhttps://forum.xda-developers.com/usercp.phpare says:
" Warning maybe error as follows: 1 com port number repetitive or invalid 2 brom and preloader have the same comport number! Please modify them in INI file or scan again."
I think i did everything correctly (installed the drivers and stuff as it says on the ulefone download page) but i haven't flashed any mediatek devices in a long time and i would be very thankful if someone can tell me what i'm doing wrong. I don't mind it getting bricked as i know that is always a risk with mediatek, but i do need to be able to flash the stock rom.
Click to expand...
Click to collapse
I had also issues using the flash tool provided on the Ulefone website, the same as you say (with the checksum). None of checksum-generating software worked for me, so I was searching long for an alternative and found this flash tool: https://spflashtool.com/. Using this tool, flashing worked for me perfectly even without having to bother with checksums.
Good luck!

pavelmracek said:
I had also issues using the flash tool provided on the Ulefone website, the same as you say (with the checksum). None of checksum-generating software worked for me, so I was searching long for an alternative and found this flash tool: https://spflashtool.com/. Using this tool, flashing worked for me perfectly even without having to bother with checksums.
Good luck!
Click to expand...
Click to collapse
Thank you very much for this! That tool works flawlessly unlike the ulefone garbage.
On another note... anyone know if there is source code for the power 2 to be found somewhere or did the dev just port another recovery somehow? I tried a while back just porting twrp by swapping files but i couldn't get the image to repack with the kitchen tool so i gave up.

ml11ML said:
Same result here. But how did you get the factory rom to flash on the phone? I first got some checksum error and had to find a checksum generator and now the silly multiport flash software says:
" Warning maybe error as follows: 1 com port number repetitive or invalid 2 brom and preloader have the same comport number! Please modify them in INI file or scan again."
I think i did everything correctly (installed the drivers and stuff as it says on the ulefone download page) but i haven't flashed any mediatek devices in a long time and i would be very thankful if someone can tell me what i'm doing wrong. I don't mind it getting bricked as i know that is always a risk with mediatek, but i do need to be able to flash the stock rom.
Click to expand...
Click to collapse
hey, how did you set your IMEIs after bricking? I usually used Engineer Mode to set them, but thats not working since i am missing "CDS Information"

Unlucky25 said:
hey, how did you set your IMEIs after bricking? I usually used Engineer Mode to set them, but thats not working since i am missing "CDS Information"
Click to expand...
Click to collapse
Uh, i never even bothered to think about imei as it just worked without doing anything.

ml11ML said:
Uh, i never even bothered to think about imei as it just worked without doing anything.
Click to expand...
Click to collapse
ok nevermind, i found a solution..yeyy
so if anybody stumples across here, who has no IMEI set, CDS information in MTK mode and no rooted phone... u can set your IMEI in MTK engineering mode under "GPRS"!

(HELP ME ) Bricked

So i did a stupid thing and flashed the wrong image when i was installing a new rom, I managed to lock myself out of ADB, TWRP and download mode. I'm in a bit of a pickle right now I've been trying everything I can to fix it, but I managed to do nothing. Is there anyone that can walk me through the steeps to get unbricked.
I've tried recovery through hisuite, but it says my device is not supported. My phone showed up via CMD command (fastboot devices) but not (adb devices). I have no idea what to do?
PLEASE HELP ME!!!

Nixonkai417 said:
So i did a stupid thing and flashed the wrong image when i was installing a new rom, I managed to lock myself out of ADB, TWRP and download mode. I'm in a bit of a pickle right now I've been trying everything I can to fix it, but I managed to do nothing. Is there anyone that can walk me through the steeps to get unbricked.
I've tried recovery through hisuite, but it says my device is not supported. My phone showed up via CMD command (fastboot devices) but not (adb devices). I have no idea what to do?
PLEASE HELP ME!!!
Click to expand...
Click to collapse
Give the all required information like Brand, model number in your post first.

Huawei honor 5x kiwi L24, I can't really acces the phone so finding some information is impossible. My main issue is when I boot it's failing to verify the Boot.img , recovery.img and system.img . I don't exactly know what all information I can give you

Nixonkai417 said:
So i did a stupid thing and flashed the wrong image when i was installing a new rom, I managed to lock myself out of ADB, TWRP and download mode. I'm in a bit of a pickle right now I've been trying everything I can to fix it, but I managed to do nothing. Is there anyone that can walk me through the steeps to get unbricked.
I've tried recovery through hisuite, but it says my device is not supported. My phone showed up via CMD command (fastboot devices) but not (adb devices). I have no idea what to do?
PLEASE HELP ME!!!
Click to expand...
Click to collapse
First open the tool
Select the update.app file
Then press Ctrl and select the imgs you want
And then right click and click extract selected
Like in here
https://up.harajgulf.com/imagef-149893652739431-png.html

-Hope- said:
First open the tool
Select the update.app file
Then press Ctrl and select the imgs you want
And then right click and click extract selected
Like in here
https://up.harajgulf.com/imagef-149893652739431-png.html
Click to expand...
Click to collapse
I have already done that, I've tried flashing it via SP flash tool but nothing, it won't show up. I've downloaded correct drivers and done what I could but my phone shows up as Lemobile android adb interface. It sometimes shows as a disk drive as well.
When I run CMD command (fastboot flash oem info) it shows everything but the recovery.img system.img and boot.img need verification how can I verify them without the debugging bridge active on the phone.

Nixonkai417 said:
I have already done that, I've tried flashing it via SP flash tool but nothing, it won't show up. I've downloaded correct drivers and done what I could but my phone shows up as Lemobile android adb interface. It sometimes shows as a disk drive as well.
When I run CMD command (fastboot flash oem info) it shows everything but the recovery.img system.img and boot.img need verification how can I verify them without the debugging bridge active on the phone.
Click to expand...
Click to collapse
What do you mean sir
Imgs are already verified cause they are official
And you don't need USB debug in fastboot mode
Your device is not has mtk processor so it won't work

-Hope- said:
What do you mean sir
Imgs are already verified cause they are official
And you don't need USB debug in fastboot mode
Your device is not has mtk processor so it won't work
Click to expand...
Click to collapse
I rooted my phone and was running xenon HD on my Huawei honor 5x, in the midst of switching ROMs I accidently targeted a TWRP recovery.img with the ROM and Gapps.
So what my phone dose now is when it powers on it an all green screen with a red box and a blue box. After a second it come up with " recovery image verify failed, please update to verified images." I can enter fastboot&rescue mode and a Huawei erecovery, but when i do try to download the recovery via WIFI it says package failure.

Nixonkai417 said:
I rooted my phone and was running xenon HD on my Huawei honor 5x, in the midst of switching ROMs I accidently targeted a TWRP recovery.img with the ROM and Gapps.
So what my phone dose now is when it powers on it an all green screen with a red box and a blue box. After a second it come up with " recovery image verify failed, please update to verified images." I can enter fastboot&rescue mode and a Huawei erecovery, but when i do try to download the recovery via WIFI it says package failure.
Click to expand...
Click to collapse
What happens when you try flashing through fastboot
Assuming that your bootloader is unlocked have you tried reflashing twrp?

-Hope- said:
What happens when you try flashing through fastboot
Assuming that your bootloader is unlocked have you tried reflashing twrp?
Click to expand...
Click to collapse
I had unlocked my bootloader but some research I was doing says, when you accidently flash wrong images it can relock the bootloader. I lost the original bootloader code and i don't exactly have the box anymore, so getting a new code will be difficult.

Nixonkai417 said:
I had unlocked my bootloader but some research I was doing says, when you accidently flash wrong images it can relock the bootloader. I lost the original bootloader code and i don't exactly have the box anymore, so getting a new code will be difficult.
Click to expand...
Click to collapse
As long as the bootloader says 'phone is unlocked' then its ok

-Hope- said:
As long as the bootloader says 'phone is unlocked' then its ok
Click to expand...
Click to collapse
I'm my case the bootloader has relocked, so in green it say phone status: locked.

Nixonkai417 said:
I'm my case the bootloader has relocked, so in green it say phone status: locked.
Click to expand...
Click to collapse
I've reread your previous post and you didn't mentioned what happens in the cmd window when trying to flash the files?

-Hope- said:
I've reread your previous post and you didn't mentioned what happens in the cmd window when trying to flash the files?
Click to expand...
Click to collapse
(REMOTE: command not allowed)

I have already sent an email to Huawei support, just waiting on a response to see if they can give me another unlock code. If I'm unable to unlock the boot loader again with the codes, what's my options for unlocling the boot loader without Huawei's help.

Bricked Ulefone Armor 8 Pro

Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.

stwm25 said:
Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.
Click to expand...
Click to collapse
You need write the model of device.
Currently I know of 3 models: 4GB RAM(Armor 8); 6&8GB RAM(Armor 8 Pro).
So with the correct stock ROM you can flash the device.
To use SPFT you need to specify which OS you have: Linux; Win7_8_10; other
This is to know if you actually installed the USB MTK drivers correctly and if further action is needed.
Also, write if you have the device with the bootloader locked or unlocked.
I have the 6GB RAM and have downloaded a time ago the GQ3090RH3_KSX70H_Ulefone_20210902_V01(Non-EU).zip file aka stock ROM. That's aka Non_EEA model. In the Ulefone site have SP_MDT_exe_v3.2048.02.00(Client).zip aka flash tool.
You used that tool?

Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.

stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
Win11 is not good to use SP tool.
Maybe using Win10?!
"MediaTek MT65xx Preloader" is normal but need installing drivers correctly. You can try this: Driver_Auto_Installer_EXE_v5.1632.00.zip - 8.8MB
Reboot VM and try with the device turned off!
For using SPFT or SP_MDT your device not need in the bootloader mode. Device turned off - conect USB - look about USB PORT COM - Scan - Start All
If you not know how to do so Read Upgrade software guide for factory assembly line.pdf
Here file and more about: Upgrade tools and USB driver - Armor 8 Pro
___________________________
UP: Maybe SP need more than you know.
I used the SPFT and worked good to me with Win10.
May be SPFT can help more than SP: SP_Flash_Tool_v5.2124_Win
For using SPFT your device not need in the bootloader mode. Device turned off - open sxcatter file - look for Download Only option (NOT use FORMAT+....!!!!) - now with the device turned off conect USB - press DOWNLOAD (Ctrl + D).

Well, you saved my phone. Thanks for the help, I really appreciate that. I installed Windows 10 and the drivers you linked me and via SP Flash Tool I managed to flash the stock ROM after connecting the device with a USB cable. Thanks again.

How do I get this phone into download mode? Cannot seem to get it to flash

I've followed your tips but I cannot get the phone recognized by the flash tool.
I've collected full details here: https://android.stackexchange.com/questions/248035/bootloop-in-ulefone-armor-8-pro

Can SPFT be used with Linux?

jlbradl said:
How do I get this phone into download mode? Cannot seem to get it to flash
Click to expand...
Click to collapse
I know the fastboot mode. It is entered by pressiong Volume + and power button simultaneously.

stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
did you fix your phone?

Alex76rod said:
did you fix your phone?
Click to expand...
Click to collapse
i have the same problem.
it wont stay turn off
so the sp tool can't flash it.

Can a "Hard-bricked" android phone be restored if there's still access to Download mode?

I accidentally installed the wrong ROM on my phone, and now it's unresponsive (nothing happens when I try to turn it on, not even a vibration)
But I managed to access Download Mode (aka EDL, right?).
Can I restore it if I have the Scatter file and the Stock ROM?
Thanks in advance

MediaTek devices have preloader mode, EDL mode is for Qualcomm

Not sure what device you're talking about, but try to look for an "unbrick tool" or an "unbrick guide"
I "semi hard-bricked" my OnePlus 3T a while ago, and there was this leaked Qualcomm tool that you could use to flash the factory ROM the phone came with from Download Mode.

aIecxs said:
MediaTek devices have preloader mode, EDL mode is for Qualcomm
Click to expand...
Click to collapse
Does the fact that I can communicate and flash via Download Mode (SP Flash Tool) mean that I didn't lose my preloader? I'm kinda stuck trying to flash the Stock ROM (demanding verified image files, even though I'm using the original firmware for flashing... probably)
Lada333 said:
Not sure what device you're talking about, but try to look for an "unbrick tool" or an "unbrick guide"
I "semi hard-bricked" my OnePlus 3T a while ago, and there was this leaked Qualcomm tool that you could use to flash the factory ROM the phone came with from Download Mode.
Click to expand...
Click to collapse
I'll check the guides online, hopefully I'll find one that'll help.

mouradsme said:
demanding verified image files, even though I'm using the original firmware for flashing
Click to expand...
Click to collapse
I've also had issues previously with trying to flash stock images on Samsung phones. Not sure if you have country-specific images, if you do, try giving all of them a shot. I'm from Hungary, and a locally bought Samsung phone only came to life after flashing a Spanish factory image.

you need to (by)pass SLA/DAA authentication

Now I managed to bypass protection, and got the successful flash message from SP Flash Tool.
But I still can't solve the issue (Phone still only responsive from BROM)

For reference I'm using the global version of RMX3171 (Realme Narzo 30A) based on MT6768, and the Stock ROM is available online.

I flashed every partition (Provided in the Stock ROM), and Now it is booting, showing the logo + a message "Download not completed Error Code 0x992566 " and then it reboots after a minute or so -_-

I think that means you did not flash all partitions (some not included in Download)
In the other thread someone mentioned "Format All + Download" very bad idea never do this.
did you try unlocking bootloader from mtkclient like suggested in that thread?

mouradsme said:
Hello,
Can someone share their nvdata & nvram + oppo_custom?
I seem to have formatted mine, and need them to recover my Narzo 30A.
Click to expand...
Click to collapse
https://androidmtk.com/use-sn-write-tool
https://www.hovatek.com/forum/thread-116.html

aIecxs said:
https://androidmtk.com/use-sn-write-tool
https://www.hovatek.com/forum/thread-116.html
Click to expand...
Click to collapse
I came across the tool, but I failed to enter into Meta Mode.
I'm trying to make my phone boot to the system, then I'll try restoring my IMEI's using MTK Engineering app.
Thanks for links though

mouradsme said:
I accidentally installed the wrong ROM on my phone, and now it's unresponsive (nothing happens when I try to turn it on, not even a vibration)
But I managed to access Download Mode (aka EDL, right?).
Can I restore it if I have the Scatter file and the Stock ROM?
Thanks in advance
Click to expand...
Click to collapse
There is no such thing as a "hard bricked" device that can still boot into TWRP. A hard bricked device is completely dead and shows no kind of activity or function. It won't charge, it won't boot into any kind of mode and can't make a connection to PC, makes no sound when connecting to PC and it won't appear in device manager when connected to PC.
A device that can boot into download mode but not its other modes is just a softbricked device.