Hello, hopefully someone can save me
I have my GEM703L
my problem is the next
I wanted to update it via OTA and it failed
I wanted to install the room, but I failed.
Now my cell phone turns on and off all the time without stopping
My bootloader is unlocked says it in red
But when I want to install with the ADB program
And I write these commands with the respective files in the ADB folder
Fastboot flash boot BOOT.img
Fastboot flash system SYSTEM.img
Fastboot flash userdata USERDATA.img
Fastboot flash recovery RECOVERY.img
Fastboot reboot
Says this "Remote command not allowed"
what should I do? If my x2 mediapad says that the bootloader is unlocked
Thanks and sorry for my bad English, I hope to find help, since in my country no one fixes these devices
Which version did you came from. Which OTA version did you try to install?
Did you try to start e-recovery? This works for 703 devices and loads automatically last working version. Or try hisuite to fix your decice.
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
---------- Post added at 03:35 PM ---------- Previous post was at 02:54 PM ----------
Do unlock command again to fix tbe message 'command not allowed'
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
audioralf said:
Which version did you came from. Which OTA version did you try to install?
Did you try to start e-recovery? This works for 703 devices and loads automatically last working version. Or try hisuite to fix your decice.
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
---------- Post added at 03:35 PM ---------- Previous post was at 02:54 PM ----------
Do unlock command again to fix tbe message 'command not allowed'
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
Click to expand...
Click to collapse
I do not remember installing version, what I remember is that I had emui 3.0 andriod 5.0, and the version that followed was emui 4.0 android 6.0, what method of mailing do you say?
thanks for the reply
Did you try to start e-recovery via volume up key while been connected to PC?
What happens if network connects?
Have you started the Huawei Hisuite PC program and select to fix your device?
Do unlock command again to fix tbe message 'command not allowed': fastboot oem unlock xxxxxxxxxxxx
(Xxxxx.. Is your bootloadercode)
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
audioralf said:
Did you try to start e-recovery via volume up key while been connected to PC?
What happens if network connects?
Have you started the Huawei Hisuite PC program and select to fix your device?
Do unlock command again to fix tbe message 'command not allowed': fastboot oem unlock xxxxxxxxxxxx
(Xxxxx.. Is your bootloadercode)
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
Click to expand...
Click to collapse
When the volume of the up and connected to the pc, appliances 3 options in the Asian language, the bottom of all the cell phone off, the middle of the medium connects a network and connects the error and error with this sign! But I can not understand what it says for the Asian language, and the one above it restarts the cell phone
After I do not use my device, I connect usb and it makes 1 pc the way to detect the connection but in the program, there is no device connected
You don't write which program says that there is no device.
Have you installed hisuite?
This should detect 703 and give option to initialize it.
If not, them repeat unlocking.
Post screenshot of the error message.
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
audioralf said:
You don't write which program says that there is no device.
Have you installed hisuite?
This should detect 703 and give option to initialize it.
If not, them repeat unlocking.
Post screenshot of the error message.
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
Click to expand...
Click to collapse
Connect in fastboot mode, the hisuite does not recognize me, and this happens in the ADB
Sorry for the double message but I want to inform you that I can solve it
I will explain the way and if someone has the same problem since in many countries they do not repair
Create a folder on the SD card with the download name and download the GEM-702LC209B203CUSTC209D001,
Then restart the phone and go into recovery clean data and cache
I restarted in the same volume and power mode and installed
Then restart and I'm in the gem702 version
Emui
Android 6.0
Now my question is not the last version, right? What would be the last one and I can install it by the dload method?
akuros123 said:
Sorry for the double message but I want to inform you that I can solve it
I will explain the way and if someone has the same problem since in many countries they do not repair
Create a folder on the SD card with the download name and download the GEM-702LC209B203CUSTC209D001,
Then restart the phone and go into recovery clean data and cache
I restarted in the same volume and power mode and installed
Then restart and I'm in the gem702 version
Emui
Android 6.0
Now my question is not the last version, right? What would be the last one and I can install it by the dload method?
Click to expand...
Click to collapse
Good for you so you solved it. But if you want to be really helpfull for others please attach link for GEM-702LC209B203CUSTC209D001 firmware which you installed.
We don't know which img files from which version you flashed.
You did not answer what curious thing you did after creating a folder with the name of download filed. Maybe you started dload with 3 button press. Bit this takes software from a dload folder. Maybe you had a dload folder from former tests.
The 202 test version is already linked in our forum and so nothing new info here for users with problems.
I am sure you will not be able to root the device because of unsolved fastboot problem. Search forum for 'unocked' and you will find many posts that the problem disappears when running fastboot unlock xxx again, although the adb says unlocked.
Usually a dload of 703 software on a 703 device should work.
You messed up the device with non fitting img files and habe a rebranded device to 702.
Unlock again
Flash twrp for 6.0
Install KangVIP v2 to install the latest firmware and get root.
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
audioralf said:
We don't know which img files from which version you flashed.
You did not answer what curious thing you did after creating a folder with the name of download filed. Maybe you started dload with 3 button press. Bit this takes software from a dload folder. Maybe you had a dload folder from former tests.
The 202 test version is already linked in our forum and so nothing new info here for users with problems.
I am sure you will not be able to root the device because of unsolved fastboot problem. Search forum for 'unocked' and you will find many posts that the problem disappears when running fastboot unlock xxx again, although the adb says unlocked.
Usually a dload of 703 software on a 703 device should work.
You messed up the device with non fitting img files and habe a rebranded device to 702.
Unlock again
Flash twrp for 6.0
Install KangVIP v2 to install the latest firmware and get root.
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
Click to expand...
Click to collapse
Thanks for the help of ralf, I already have the recovery that you mention installed, now a question can I put you android 7.0? Are there any rooms
no android 7 available.
Have you installed TWRP for 6.0?
Did you install KangVIP?
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
audioralf said:
no android 7 available.
Have you installed TWRP for 6.0?
Did you install KangVIP?
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
Click to expand...
Click to collapse
Yes, I already update everything, and I'm in the KangVIP version
Now my big doubt I wanted to go to 7.0 for the reason that I have an endoscope and the app does not show image, it probe in another LG cell phone that runs the 7.0 and it works, does it have something to do with this? Is there any method for the endoscope app to work?
Sorry I haven't heard about this video problem. Is has nothing to do with 7.0, but maybe has to do with missing video codecs. Ask the vendor of endoscope for solution.
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
audioralf said:
Sorry I haven't heard about this video problem. Is has nothing to do with 7.0, but maybe has to do with missing video codecs. Ask the vendor of endoscope for solution.
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
Click to expand...
Click to collapse
Thank you very much my device is working great; I will see how to solve the subject of the endoscope and back many thanks
Related
Hi,
I have a GEM-703L
and i tired to update to GEM 703L B211 6.0 downloaded from (this thread)
and i followed all steps, but when restarted it stuck on honor logo for 40 min like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and i followed the steps in this comment but this is what happened:
please help
Dload method of Android 5.1.1 Firmware under Android 6.0 environment won't work.
I suggest you follow the steps in this thread: Safe way to get back to B112 (android 5.1.1) from B205 or B209 (android 6.0)
Get back to B112 first, and try update to 6.0 again.
iamhcg said:
Dload method of Android 5.1.1 Firmware under Android 6.0 environment won't work.
I suggest you follow the steps in this thread: Safe way to get back to B112 (android 5.1.1) from B205 or B209 (android 6.0)
Get back to B112 first, and try update to 6.0 again.
Click to expand...
Click to collapse
thank you for your reply.
there's one of the steps that says to copy files in the internal storage, but how can i do that while the device won't turn on?
You can mount sd in TWRP.
Look at the other thread where I helped someone else with similar problem last week.
My device: 701->703 B211 xposed 86
audioralf said:
You can mount sd in TWRP.
Look at the other thread where I helped someone else with similar problem last week.
My device: 701->703 B211 xposed 86
Click to expand...
Click to collapse
thank you very much for your reply.
can you please post the solution link from that thread here.
Look there
You photo shows a screen wich comes up, if you start the recovery2. This comes up on pressing VOL+ and been USB connected.
If you want to dload via 3 finger method unconnect USB.
audioralf said:
Look there
You photo shows a screen wich comes up, if you start the recovery2. This comes up on pressing VOL+ and been USB connected.
If you want to dload via 3 finger method unconnect USB.
Click to expand...
Click to collapse
i want to clarify that i don't have TWRP installed.
i tried putting B112 from this thread in (dload\update.app) in the external sd card
and then pluged the usb and held the power button with vol+ and vol-
and it started installing but i'm stuck at 5% for more than 60 minutes ?!
i'm really confused, what am i missing
.
This means that the update.app can not update. The reason is that the existing rom does not fit to the 112 update.
Which version did you have instated before?
My device: 701->703 B211 xposed 86
---------- Post added at 10:27 AM ---------- Previous post was at 10:26 AM ----------
And again disconnect usb when trying this.
My device: 701->703 B211 xposed 86
audioralf said:
This means that the update.app can not update. The reason is that the existing rom does not fit to the 112 update.
Which version did you have instated before?
My device: 701->703 B211 xposed 86
---------- Post added at 10:27 AM ---------- Previous post was at 10:26 AM ----------
And again disconnect usb when trying this.
My device: 701->703 B211 xposed 86
Click to expand...
Click to collapse
i don't really remember, but i think it was b112 .
Did you try again with unconnected usb. There should be no usb icon on the screen.
My device: 701->703 B211 xposed 86
audioralf said:
Did you try again with unconnected usb. There should be no usb icon on the screen.
My device: 701->703 B211 xposed 86
Click to expand...
Click to collapse
i just tried the Power and vol+ and vol- without usb connected
with SDcard inside with (dload\update.app) B112 GEM-703L
and i still get error.
is there any program like odin that i can format huawei phones with ?
.
no there is isn't.
We seem not to find out which system resides on the phone.
flash TWRP for Android 5.11 on recovery2 partion:
fastboot flash recovery2 twrp.img
(use instead of twrp.img the exact filename which you have)
First try the newest Twrp.
Start the TWRP while your device is connected to usb and you hold VOL UP key on start.
Then press wipe and do the factory reset: wipe cache, dalvic and system.
Then format internal SD via TWRP.
Then return to bootloader mode via holding VOL MINUS key on start.
You can try to extract the boot, system, recovery from several versions and flash them via adb.
Always copy the update.app to external sd inside a folder /dload on root of the external SD
Start with the files for B112 : extract them to your adb directory and copy update.app to exernal SD /dload.
Flash the 3 files and start device with all buttons pressed.
Repeat this up to 4 times if it fails.
If it still fails, then try Version B202 (only use the update.app of B202 do NOT unzip update.zip and exctrace the included update.app for 211. This will not work and lead you in deeper problems)
If this still fails, try Version B003.
If dload is successful, then install the next higher update.app : factory reset on EMUI including format internal SD and then B106
If you are successful on B106 then just dload B112
if you are successful on B112 start patitional update (this is update.zip in /dload folder)
If you are successful on B202 then install neweset TWRP and internaltion B202
if you are successful on B211 then intall newest TWRP and KANGVIP 211
audioralf said:
no there is isn't.
We seem not to find out which system resides on the phone.
flash TWRP for Android 5.11 on recovery2 partion:
fastboot flash recovery2 twrp.img
(use instead of twrp.img the exact filename which you have)
Click to expand...
Click to collapse
i put the phone in the fastboot&rescue mode by holding power button and vol-
and then held the shift button and right click on the folder (twrp) and chose the cmd
and i wrote "fastboot flash recovery2 (file name)" :
am i doing it right ??
.
mesho1986 said:
-cut-
am i doing it right ??
.
Click to expand...
Click to collapse
Yes, you are doing right but effect is not right... Did you unlock bootloader yourself? Are you sure it is unlocked? Sometimes it is NOT unlocked even though it is so written!
trurl3 said:
Yes, you are doing right but effect is not right... Did you unlock bootloader yourself? Are you sure it is unlocked? Sometimes it is NOT unlocked even though it is so written!
Click to expand...
Click to collapse
i never did anything with the bootloader myself, it was this way since i bought this GEM-703L
i don't know if it's locked or unlocked ?
can you please guide me how to know and confirm that to you.
i still have hope that this issue can be solved.
thank you so much ( audioralf , trurl3 ) for your caring and responding.
.
Well simply press Return. If flash is successful your Bootloader is Really unlocked.
This is the test you habe already done.
You have bought a used device.
My device: 701->703 B211 xposed 86
---------- Post added at 07:02 AM ---------- Previous post was at 06:38 AM ----------
Ti unlock bootloader use DC-unlocked for 4 EUR. Our try this:
Joseph reported to get bootloader code immediately via Chinese website: 'To calculate unlock code I used chinese version of http://emui.huawei.com/ and created account.
After login into my account I went on that page: https://emui.huawei.com/plugin/unlock/index
I agreed and confirmed and on the next page I just filled S/N, IMEI and ID.
There is also english version, but for me it was not working (broken verification code image). '
Type
fastboot oem unlock xxxx
My device: 701->703 B211 xposed 86
audioralf said:
Well simply press Return. If flash is successful your Bootloader is Really unlocked.
This is the test you habe already done.
You have bought a used device.
My device: 701->703 B211 xposed 86
---------- Post added at 07:02 AM ---------- Previous post was at 06:38 AM ----------
Ti unlock bootloader use DC-unlocked for 4 EUR. Our try this:
Joseph reported to get bootloader code immediately via Chinese website: 'To calculate unlock code I used chinese version of http://emui.huawei.com/ and created account.
After login into my account I went on that page: https://emui.huawei.com/plugin/unlock/index
I agreed and confirmed and on the next page I just filled S/N, IMEI and ID.
There is also english version, but for me it was not working (broken verification code image). '
Type
fastboot oem unlock xxxx
My device: 701->703 B211 xposed 86
Click to expand...
Click to collapse
actually i bought it new, not used.
and i will try the stuff above in your reply.
thank you,
We saw this often. It might be a relock via the vendor which closes the bootloader, but message 'unlock' remains. All people who unlocked were successful after this.
Replace xxxx with the bootloader code you receive on this page, or you via dc-unlocker software
My device: 701->703 B211 xposed 86
I'm having a similar issue. I have twrp and bootloader unlocked. I can get into fastboot and twrp, but nothing else. Just hang on boot. My phone is 703L B211, but I'm not sure if my mucking about changed that. I've done a few factory resets from twrp in between installing a few different roms to try and fix it. It originally bricked when I tried to install SuperSU, and I'm feeling overwhelmed trying to figure out where to begin fixing it. What guide should I "start at"? What firmware, roms, etc. do I need to install, and in what order? I'm so confused.
search for systemless root and type the command in twrp command window.
Then see if device starts.
If you havn't installed any rom or dload, write wich version you were on as last.
If you tried to flash or install anything write down what you did.
Hello,
After trying to update the B211 using the dload version ( extract zip and put all files into the dload forlder of my sd card )
the software update got stucked at 90% and now i cannot boot anymore...
What should i do ? Use dload with full zip ? shoudl that be working ?
stucked at Honor logo shining
I tried putting the dload/update.app from 112 into the SD and POWER+VOLUP+VOLDOWN... Failed...
Tried to extract system/recovery/.... from the update.app and flash using fastboot got an error : "WRITE" remote command not allowed
I'm out of idea...
I've got 2 zips ( 1 for 112 and one for 211 )....
the one from 112 contains only 1 update.app the one from 211 contains 1 update app + sytem folders etc etc...
Any help ?
br
SK
Exctracting B211 zip file and dload the included update.app leads excatly in this problem.
Update.zip has to be started via EMUI firmware update as incremental update.
DO NOT UNZIP update.zip. WARNING FOR EVERYONE who thinks he can update with this files with the 3 Button press method.
To get back your system do this:
you must unlock bootloader (see root thread)
fastboot oem unlock xxxx ( xxxx is the booloader code wich you can get via chinese site
it's a bit difficult and requires some data about your device. but I hope you have written down your IMEI and serial number or find it somewhere on the box.
If you have not rooted before and can not unlock your bootloader, you have no chance to get back a running system, as far as I know.
If you have unlocked then you can flash root, system and recovery extracted from B112 update.app (huawei update extractor).
Then start Huawei recovery (vol + on boot) and select factory reset if available.
Then put update.app from B112 to dload folder and boot device with vol+ and vol -
If you are on B112 then do a factory reset from EMUI.
Then delete the update.app in dload folder and replace it by the update.zip
Then start the system and select incremental update.
After sytem starts do minimal configuration and restart device in fastboot mode.
Then flash the neweset twrp for android 6.0
fasboot flash recovery2 X2-TWRP-3.0-2-BLACK-BLUE.img
start TWRP via rebooting device with volume up key pressed and USB connected.
in TWRP flash KANGVIP-SLIM-B211 7-27-16.zip
---------- Post added at 09:25 PM ---------- Previous post was at 09:18 PM ----------
There is a rollback file for Android 6.0 which brings you back to Android 5.0
If you can't root, you can try this as last chance.
unpack this file .
It includes a "dload folder" and put the content to dload folder of your device /SD card and start with 3 finger
hey, thanks for your answer...
when you say that : " If you have unlocked then you can flash root, system and recovery extracted from B112 update.app (huawei update extractor). "...
the thing is i do have an error while flashing system and recovery ? " Cannot Write ... "
stekam
screenshot bellow
Have you enabled USB Debugging and unlocked successful by yourself?
We have seen many devices showing unlocked, but were relocked.
My device: 701->703 B211 xposed 86
audioralf said:
Have you enabled USB Debugging and unlocked successful by yourself?
We have seen many devices showing unlocked, but were relocked.
My device: 701->703 B211 xposed 86
Click to expand...
Click to collapse
I think you might be correct but...
with my huawei ID i cant request unlock code...
Any one can sent me an unlock code if i sent you all necessary info ???
Look into your pm
My device: 701->703 B211 xposed 86
audioralf said:
Look into your pm
My device: 701->703 B211 xposed 86
Click to expand...
Click to collapse
sorry !
answer supplied !
thanks buddy
audioralf said:
Look into your pm
My device: 701->703 B211 xposed 86
Click to expand...
Click to collapse
thanks in advance!
:good:
Feeling Crazy, no tablet, no unlock code ! :silly: :crying:
Any help is welcome if you cant supply me an unlock code i do have all necessary info's
Huawei requires the 14 days 'online' for his 701 device.
My device: 701->703 B211 xposed 86
What if impossible?!
Hi! This is my first post and going to be a long one! But kindly excuse me! I need HELP!
I have Semi bricked my Honor 6x firmware (bln-l22, android 6.0, emui 4.1, c675b132, india channel) while trying to manually update it to Nougat which I downloaded from "stechguide.com/honor-6x- b360-nougat-update". I downloaded the Asian version. I accidentally extracted and flashed update_data_full_BLN-L22_hw_spcseas.zip instead of the update.zip first. The update_data_full_BLN-L22_hw_spcseas.zip file got to 100% installed and then went to Huawei eRecovery. Then I couldn't flash the update.zip. I get a software install failed. Also tried to manually flash to stock Rom and other newer update versions of Nougat on SD card again but I get software install failed or Incompatible for this phone. I tried to factory hard reset but this also fails. I can wipe only the cache and reboot which goes again to eRecovery. The eRecovery on wifi does not work either. I looked up booting to safe mode but nothing happens.
After reading a lot on this forum, I tried minimal adb and fastboot. My device in fastboot & rescue mode shows up on minimal adb and fastboot when I type "fastboot devices" command (but adb devices gives no devices/emulator found). It also shows up as Android Phone (Android sooner Single ADB Interface) in Device manager on PC and android drivers is upto date. The Huawei suite loads up but can't connect to it (can't enable hdb).
My phone is boot locked, FRP locked, not rooted (and impossible to enable usb debug) so I can't flash any commands like recovery.img, system.img or twrp and cwm recovery. I always get the remote command not allowed.
Right now, On starting my device, Honor logo shows up, vibrates and goes dark twice then to eRecovery.
All the other combination functions of Power, Vol - and Vol + works.
Please help me restore my Honor 6x to stock or update to Nougat! Thanks a ton!
extract update.zip. Get the UPDATE.APP.
create a "dload" directory to your sdcard. copy UPDATE.APP in this folder
shutdown phone / unplug phone.
hold on VOL + + VOL - + POWER
UPDATE.APP will install. Then shutdown phone. remove UPDATE.APP from dload directory. Extract UPDATE.APP from second zip (smallest one: update_data_full_BLN-L22_hw_spcseas.zip)
copy this new UPDATE.APP into dload folder on sdcard.
Shutdown phone / unplug
hold on VOL + + VOL - + POWER
When install complete, try to boot, if not boot, recovery into recovery and wipe cache / data
sanjay.rup said:
extract update.zip. Get the UPDATE.APP.
Heya! Thanks for the reply.
Can you be more specific about Which ROM to use? The stock ROM or the Newer Nougat Firmware for my phone model?
I have tried the following:
Honor 6X B132 Stock ROM and Honor 6X B320, 330, 360. Yet to try B320, 340 & 342 Firmwares.
I don't remember which one says incompatible, wrong update package or software update failed after 6% installation but bottom line is they all fail to install. I can't do a Hard reset and only wipe cache. I do wipe cache before flashing with SD card dload method but still unsuccesful.:fingers-crossed:
Click to expand...
Click to collapse
Rommco05 said:
Check in fastboot if is FRP unlocked, if is u can fix your device with unlocked bootloader
Click to expand...
Click to collapse
Both Bootloader and FRP are locked.
Rommco05 said:
So here is way maybe over rollback packages, but i don't know where can find for your model
Click to expand...
Click to collapse
As far as I know, There is no rollback packages for BLN22(India) yet. :crying: Is there a way to flash it to Nougat?
Rommco05 said:
Yes but FRP must be unlocked and thats possible only in rom
Click to expand...
Click to collapse
I have messed up pretty bad or just plain unlucky! What do you recommend me to try?
Local85 said:
sanjay.rup said:
extract update.zip. Get the UPDATE.APP.
Heya! Thanks for the reply.
Can you be more specific about Which ROM to use? The stock ROM or the Newer Nougat Firmware for my phone model?
I have tried the following:
Honor 6X B132 Stock ROM and Honor 6X B320, 330, 360. Yet to try B320, 340 & 342 Firmwares.
I don't remember which one says incompatible, wrong update package or software update failed after 6% installation but bottom line is they all fail to install. I can't do a Hard reset and only wipe cache. I do wipe cache before flashing with SD card dload method but still unsuccesful.:fingers-crossed:
Click to expand...
Click to collapse
My honor 6x is bln l22 b372 I want roll back to stockrom can I use your method ? My phone still virgin.. hehhee
Click to expand...
Click to collapse
Use last BLN-L22 B360 nougat it will work
Wildan212 said:
Local85 said:
My honor 6x is bln l22 b372 I want roll back to stockrom can I use your method ? My phone still virgin.. hehhee
Click to expand...
Click to collapse
I am not sure! Some people have updated successfully while others are not so lucky and some like me, have messed up!
Unless you are unhappy with your phone performance, I'd recommend not to rollback provided our rollback package is even available to perform that!
Click to expand...
Click to collapse
Wildan212 said:
Local85 said:
My honor 6x is bln l22 b372 I want roll back to stockrom can I use your method ? My phone still virgin.. hehhee
Click to expand...
Click to collapse
Here is the bll l22 rollback package
http://consumer.huawei.com/bd/support/downloads/detail/index.htm?id=94065
Download and extract this there is update.app copy to external sdcard/dload now power off the device ,now press& hold all three buttons after vibrate release power button, it will update.
Then after download this http://consumer.huawei.com/bd/support/downloads/detail/index.htm?id=94066
Now same as above one download-extract the update.app and copy to dload folder (delete the old one ) and power off and press and hold trick.
Done
Click to expand...
Click to collapse
sanjay.rup said:
Use last BLN-L22 B360 nougat it will work
Click to expand...
Click to collapse
Can you kindly send me the firmware download links?
Edit:
I dug deeper into this B360 nougat update and I now know for sure I've tried to flash a wrong update for my Phone wrongly.
The B360 for – [Asian variant] Honor 6X is BLN-L22C636Bxxx which is different from the Indian build – [Indian variant] Honor 6X BLN-L22C675Bxxx.
Am I missing something here?
Local85 said:
Can you kindly send me the firmware download links?
Edit:
I dug deeper into this B360 nougat update and I now know for sure I've tried to flash a wrong update for my Phone wrongly.
The B360 for – [Asian variant] Honor 6X is BLN-L22C636Bxxx which is different from the Indian build – [Indian variant] Honor 6X BLN-L22C675Bxxx.
Am I missing something here?
Click to expand...
Click to collapse
You can try with BLN-L22C675B330
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1190/g79/v90641/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...el_in/update_data_full_BLN-L22_channel_in.zip
Hi all
First, sorry for my English. I'm french.
I have an Huawei Mate 9 MHA-L09 C432 simple SIM, i want to update to MHA-L29 C432 Dual SIM.
I'm on Android 8.0.
Steps already done :
- Fastboot unlock
- OEM unlock
- Install of recovery TWRP : https://forum.xda-developers.com/mate-9/development/preliminary-twrp-3-1-1-0-mate-9-emui-8-t3687622 for OREO
- I can boot on TWRP with volume Up + power
My Huawei is not rooted. Do i need ?
What's the next steps to install the original MHA-L29 C432 Oreo 8.0 ?
I have tried with HWOTA MHA, i have downloaded
update.zip
update_full_MHA-L29_hw_eu.zip
update_data_full_public.zip
and copy in C:/HWOTA_VTR/update/
and i have run update.cmd in administrator mode, in first, i have started the Huawei in fastboot with volume down + cable usb, enter, hwota install the recovery img, first i have had an error because the partition is recovery_ramdisk now, i have changed, then, the script tell to reboot to twrp
but, when the HWOTA MHA is waiting for my Huawei in TWRP mode, i connect the smartphone with the USB cable, nothing to happening.
A driver is missing maybe ?
Thank you in advance.
Hi all
First, sorry for my English. I'm french.
I have an Huawei Mate 9 MHA-L09 C432 simple SIM, i want to update to MHA-L29 C432 Dual SIM.
I'm on Android 8.0.
Steps already done :
- Fastboot unlock
- OEM unlock
- Install of recovery TWRP : https://forum.xda-developers.com/mat...mui-8-t3687622 for OREO
- I can boot on TWRP with volume Up + power
My Huawei is not rooted. Do i need ?
What's the next steps to install the original MHA-L29 C432 Oreo 8.0 ?
I have tried with HWOTA MHA, i have downloaded
update.zip
update_full_MHA-L29_hw_eu.zip
update_data_full_public.zip
and copy in C:/HWOTA_VTR/update/
and i have run update.cmd in administrator mode, in first, i have started the Huawei in fastboot with volume down + cable usb, enter, hwota install the recovery img, first i have had an error because the partition is recovery_ramdisk now, i have changed, then, the script tell to reboot to twrp
but, when the HWOTA MHA is waiting for my Huawei in TWRP mode, i connect the smartphone with the USB cable, nothing to happening.
A driver is missing maybe ?
Thank you in advance