Honor 6x BLN22 Semi Bricked! Help! - Honor 6X Questions & Answers

Hi! This is my first post and going to be a long one! But kindly excuse me! I need HELP!
I have Semi bricked my Honor 6x firmware (bln-l22, android 6.0, emui 4.1, c675b132, india channel) while trying to manually update it to Nougat which I downloaded from "stechguide.com/honor-6x- b360-nougat-update". I downloaded the Asian version. I accidentally extracted and flashed update_data_full_BLN-L22_hw_spcseas.zip instead of the update.zip first. The update_data_full_BLN-L22_hw_spcseas.zip file got to 100% installed and then went to Huawei eRecovery. Then I couldn't flash the update.zip. I get a software install failed. Also tried to manually flash to stock Rom and other newer update versions of Nougat on SD card again but I get software install failed or Incompatible for this phone. I tried to factory hard reset but this also fails. I can wipe only the cache and reboot which goes again to eRecovery. The eRecovery on wifi does not work either. I looked up booting to safe mode but nothing happens.
After reading a lot on this forum, I tried minimal adb and fastboot. My device in fastboot & rescue mode shows up on minimal adb and fastboot when I type "fastboot devices" command (but adb devices gives no devices/emulator found). It also shows up as Android Phone (Android sooner Single ADB Interface) in Device manager on PC and android drivers is upto date. The Huawei suite loads up but can't connect to it (can't enable hdb).
My phone is boot locked, FRP locked, not rooted (and impossible to enable usb debug) so I can't flash any commands like recovery.img, system.img or twrp and cwm recovery. I always get the remote command not allowed.
Right now, On starting my device, Honor logo shows up, vibrates and goes dark twice then to eRecovery.
All the other combination functions of Power, Vol - and Vol + works.
Please help me restore my Honor 6x to stock or update to Nougat! Thanks a ton!

extract update.zip. Get the UPDATE.APP.
create a "dload" directory to your sdcard. copy UPDATE.APP in this folder
shutdown phone / unplug phone.
hold on VOL + + VOL - + POWER
UPDATE.APP will install. Then shutdown phone. remove UPDATE.APP from dload directory. Extract UPDATE.APP from second zip (smallest one: update_data_full_BLN-L22_hw_spcseas.zip)
copy this new UPDATE.APP into dload folder on sdcard.
Shutdown phone / unplug
hold on VOL + + VOL - + POWER
When install complete, try to boot, if not boot, recovery into recovery and wipe cache / data

sanjay.rup said:
extract update.zip. Get the UPDATE.APP.
Heya! Thanks for the reply.
Can you be more specific about Which ROM to use? The stock ROM or the Newer Nougat Firmware for my phone model?
I have tried the following:
Honor 6X B132 Stock ROM and Honor 6X B320, 330, 360. Yet to try B320, 340 & 342 Firmwares.
I don't remember which one says incompatible, wrong update package or software update failed after 6% installation but bottom line is they all fail to install. I can't do a Hard reset and only wipe cache. I do wipe cache before flashing with SD card dload method but still unsuccesful.:fingers-crossed:
Click to expand...
Click to collapse

Rommco05 said:
Check in fastboot if is FRP unlocked, if is u can fix your device with unlocked bootloader
Click to expand...
Click to collapse
Both Bootloader and FRP are locked.

Rommco05 said:
So here is way maybe over rollback packages, but i don't know where can find for your model
Click to expand...
Click to collapse
As far as I know, There is no rollback packages for BLN22(India) yet. :crying: Is there a way to flash it to Nougat?

Rommco05 said:
Yes but FRP must be unlocked and thats possible only in rom
Click to expand...
Click to collapse
I have messed up pretty bad or just plain unlucky! What do you recommend me to try?

Local85 said:
sanjay.rup said:
extract update.zip. Get the UPDATE.APP.
Heya! Thanks for the reply.
Can you be more specific about Which ROM to use? The stock ROM or the Newer Nougat Firmware for my phone model?
I have tried the following:
Honor 6X B132 Stock ROM and Honor 6X B320, 330, 360. Yet to try B320, 340 & 342 Firmwares.
I don't remember which one says incompatible, wrong update package or software update failed after 6% installation but bottom line is they all fail to install. I can't do a Hard reset and only wipe cache. I do wipe cache before flashing with SD card dload method but still unsuccesful.:fingers-crossed:
Click to expand...
Click to collapse
My honor 6x is bln l22 b372 I want roll back to stockrom can I use your method ? My phone still virgin.. hehhee
Click to expand...
Click to collapse

Use last BLN-L22 B360 nougat it will work

Wildan212 said:
Local85 said:
My honor 6x is bln l22 b372 I want roll back to stockrom can I use your method ? My phone still virgin.. hehhee
Click to expand...
Click to collapse
I am not sure! Some people have updated successfully while others are not so lucky and some like me, have messed up!
Unless you are unhappy with your phone performance, I'd recommend not to rollback provided our rollback package is even available to perform that!
Click to expand...
Click to collapse

Wildan212 said:
Local85 said:
My honor 6x is bln l22 b372 I want roll back to stockrom can I use your method ? My phone still virgin.. hehhee
Click to expand...
Click to collapse
Here is the bll l22 rollback package
http://consumer.huawei.com/bd/support/downloads/detail/index.htm?id=94065
Download and extract this there is update.app copy to external sdcard/dload now power off the device ,now press& hold all three buttons after vibrate release power button, it will update.
Then after download this http://consumer.huawei.com/bd/support/downloads/detail/index.htm?id=94066
Now same as above one download-extract the update.app and copy to dload folder (delete the old one ) and power off and press and hold trick.
Done
Click to expand...
Click to collapse

sanjay.rup said:
Use last BLN-L22 B360 nougat it will work
Click to expand...
Click to collapse
Can you kindly send me the firmware download links?
Edit:
I dug deeper into this B360 nougat update and I now know for sure I've tried to flash a wrong update for my Phone wrongly.
The B360 for – [Asian variant] Honor 6X is BLN-L22C636Bxxx which is different from the Indian build – [Indian variant] Honor 6X BLN-L22C675Bxxx.
Am I missing something here?

Local85 said:
Can you kindly send me the firmware download links?
Edit:
I dug deeper into this B360 nougat update and I now know for sure I've tried to flash a wrong update for my Phone wrongly.
The B360 for – [Asian variant] Honor 6X is BLN-L22C636Bxxx which is different from the Indian build – [Indian variant] Honor 6X BLN-L22C675Bxxx.
Am I missing something here?
Click to expand...
Click to collapse
You can try with BLN-L22C675B330
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1190/g79/v90641/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...el_in/update_data_full_BLN-L22_channel_in.zip

Related

Restore stock B131

Hello,
I have B360 but got some problems :no keyboard, and can't access to developer option ( so i can't enable usb debugging and go on bootloader)
I also can't access TWRP (stuck at message' devices will booting....)
I'm trying to restore stock B131 and follow this https://forum.xda-developers.com/showpost.php?p=70870396&postcount=149
But when it start install, it failed at like 7%
What should i do ?
Tell us more details about what you have done,phone model and what files you used for the rollback. Maybe then we can help you
Sheldd said:
Tell us more details about what you have done,phone model and what files you used for the rollback. Maybe then we can help you
Click to expand...
Click to collapse
Model FRD-L09
I update from B131 to B360, using this method https://forum.xda-developers.com/showpost.php?p=70396400&postcount=547 but my /data was encrypted so I format data
Now I don't have anymore access to twrp idk why. And I have no keyboard, and when I click on developer option to enabling usb debugging, It instantly close the menu.
So now I have no acces to twrp/bootloader and i'm on B360 with no keyboard/develloper option bugged :'(
I want to restore stock B131, and I tried this using dload method, but it fail at 7%
I used this file [https://www.androidfilehost.com/?w=files&flid=129652, I think it's the good file
remi13014 said:
Model FRD-L09
I update from B131 to B360, using this method https://forum.xda-developers.com/showpost.php?p=70396400&postcount=547 but my /data was encrypted so I format data
Now I don't have anymore access to twrp idk why. And I have no keyboard, and when I click on developer option to enabling usb debugging, It instantly close the menu.
So now I have no acces to twrp/bootloader and i'm on B360 with no keyboard/develloper option bugged :'(
I want to restore stock B131, and I tried this using dload method, but it fail at 7%
I used this file [https://www.androidfilehost.com/?w=files&flid=129652, I think it's the good file
Click to expand...
Click to collapse
I think i know what you have done wrong, you didnt flashed the rollback package.
Here you have the rollback package for your device http://download-c.huawei.com/download/downloadCenter?downloadId=92134&version=363841&siteCode=it-h
Here you have the firmware, just to be sure it's the corect one http://download-c.huawei.com/download/downloadCenter?downloadId=92104&version=360397&siteCode=it-h
Now the proces is simple.
First, unzip the rollback package, copy the update.app to dload folder and do the force update (Press and hold Volume UP+Volume Down+Power Button)
Second do the same things but now with the update.app from the B131 firmware zip.
DONT PUT BOTH update.app at once. First the rollback update.app and then the B131 update.app.
Sheldd said:
I think i know what you have done wrong, you didnt flashed the rollback package.
Here you have the rollback package for your device http://download-c.huawei.com/download/downloadCenter?downloadId=92134&version=363841&siteCode=it-h
Here you have the firmware, just to be sure it's the corect one http://download-c.huawei.com/download/downloadCenter?downloadId=92104&version=360397&siteCode=it-h
Now the proces is simple.
First, unzip the rollback package, copy the update.app to dload folder and do the force update (Press and hold Volume UP+Volume Down+Power Button)
Second do the same things but now with the update.app from the B131 firmware zip.
DONT PUT BOTH update.app at once. First the rollback update.app and then the B131 update.app.
Click to expand...
Click to collapse
Oh ok thanks.
So I used rollback update, 100% ok
then use the second update.app but it failled at 8% with this file https://www.androidfilehost.com/?w=files&flid=129652
, I'm downloading your file but I think it's the same file :s
I tried with your file Honor 8_Firmware_FRD-L09_Android 6.0_EMUI 4.1_C432B131_Western Europe, it still failled, not at 8% but at 14% :'(
I notice I got N°Build NRD90M test keys and I should have this FRD-LXXC900B300. (cf .pdf)
remi13014 said:
I tried with your file Honor 8_Firmware_FRD-L09_Android 6.0_EMUI 4.1_C432B131_Western Europe, it still failled, not at 8% but at 14% :'(
I notice I got N°Build NRD90M test keys and I should have this FRD-LXXC900B300. (cf .pdf)
Click to expand...
Click to collapse
I had some strange things at BUILD when i flashed the rollback too, but there wasnt any problem. So when i flashed the B131 everything was fine. Try doing a factory reset on B300 and then flash again the B131. I dont know what to say more, but here is why you have this problems,because you tried to flash B131 over B360....
Yes I did some factory reset and wipe but still fail when I install B131 :/
Do you think there is a solution ?
Or I should go on customer service
remi13014 said:
Do you think there is a solution ?
Or I should go on customer service
Click to expand...
Click to collapse
There is always a solution, don't get panicked. Remember that once you unlocked your phone your warranty got voided. So I don't think Huawei's customer service will give you any advice with your problem.
Try following this:
Can you get into "bootloader"?
If yes, try to extract the needed image files from the B360 update that you used before and follow this guide provided by @eksasol https://forum.xda-developers.com/showpost.php?p=70620803&postcount=9
This video gives you an idea on how to use the Huawei Firmware Extractor Tool: https://www.youtube.com/watch?v=XAtoaL6i_i0
A good note of advice I'll give you my friend. If you get to fix your phone once more, don't tried anything else on it until you are more proficient on how to solve problems by searching and learning from other members' experiences. Use the forum's search tool and you'll find many posts related to your question. I've been helping you through private messages for several issues so far. Don't take me wrong but even though we members like helping others we can't be your private customer care consultants. Hope you can recover your phone's functionality once more.
Regards,
I don't have acces to bootloader, since the developer option is bugged and i can't enabling usb debugging, so i can't reboot on bootloader
]
Dominikrod said:
A good note of advice I'll give you my friend. If you get to fix your phone once more, don't tried anything else on it until you are more proficient on how to solve problems by searching and learning from other members' experiences. Use the forum's search tool and you'll find many posts related to your question. I've been helping you through private messages for several issues so far. Don't take me wrong but even though we members like helping others we can't be your private customer care consultants. Hope you can recover your phone's functionality once more.
,
Click to expand...
Click to collapse
yes, i know thanks and sorry for that
remi13014 said:
I don't have acces to bootloader, since the developer option is bugged and i can't enabling usb debugging, so i can't reboot on bootloader
] yes, i know thanks and sorry for that
Click to expand...
Click to collapse
As far as I know you don't need the debugging option to access the bootloader and use the "fastboot" commands to push the image files.
Just turn off your phone connect it to your computer and use the "Volume down + power on" procedure to get into bootloader.
On the other hand, if for some reason the "OEM unlocking" option was disabled in your phone's /settings/developer options/ then that's gonna be a problem I think, but I'm not a 100%. This might not let you flash the image files through fastboot. Try it and let me know.
---------- Post added at 05:06 PM ---------- Previous post was at 05:03 PM ----------
I know this can be fixed because I've been there before with the same problem as you are.
Dominikrod said:
As far as I know you don't need the debugging option to access the bootloader and use the "fastboot" commands to push the image files.
Just turn off your phone connect it to your computer and use the "Volume down + power on" procedure to get into bootloader.
On the other hand, if for some reason the "OEM unlocking" option was disabled in your phone's /settings/developer options/ then that's gonna be a problem I think, but I'm not a 100%. This might not let you flash the image files through fastboot. Try it and let me know.
---------- Post added at 05:06 PM ---------- Previous post was at 05:03 PM ----------
I know this can be fix because I've been there before with the same problem as you are.
Click to expand...
Click to collapse
I don't think i can access too bootloader
the only way before i did it, it was from commmand " adb reboot bootloader""
and the power+volum do nothing, i only can go on recovery with + and power
remi13014 said:
I don't think i can access too bootloader
the only way before i did it, it was from commmand " adb reboot bootloader""
and the power+volum do nothing, i only can go on recovery with + and power
Click to expand...
Click to collapse
Sorry, I think you misunderstood what I wrote. Let me clarify myself, to get to bootloader you turn off your phone first, then by pressing "volume down/power on" simultaneously until you feel the phone vibrating and see the blue screen. This should get you to the bootloader.
---------- Post added at 05:40 PM ---------- Previous post was at 05:27 PM ----------
Remember to connect your phone first to your computer using the usb/type C cable before attempting to go to the bootloader. I you fail to do this the phone will just reboot normally.
ok it's worked ^^
I will do the Huawei Firmware Extractor Tool tomorrow
I also install twrp since i have acces to bootloader
remi13014 said:
ok it's worked ^^
I will do the Huawei Firmware Extractor Tool tomorrow
I also install twrp since i have acces to bootloader
Click to expand...
Click to collapse
Good. But I don't think flashing TWRP will work but give it a try. I know this from my own experience. What you really need is to flash the recovery.img from the B360 update.zip using fastboot command. That way you'll be able to use the dload method and flash the rollback update.app and after that the update.app from the B131 full zip. That should get you back to stock.
Dominikrod said:
Good. But I don't think flashing TWRP will work but give it a try. I know this from my own experience. What you really need is to flash the recovery.img from the B360 update.zip using fastboot command. That way you'll be able to use the dload method and flash the rollback update.app and after that the update.app from the B131 full zip. That should get you back to stock.
Click to expand...
Click to collapse
So I extracted and flashed via fastboot boot.img, system.img, recovery.img from B360( there are no cust.img in the archive)
After I wipe and reboot. Then install rollback update.app, then update.app B131 but it fail at 25%
But now menu working good and I oculd install a keyboard and do what i want. Maybe i will just stay like this. All is working and i'm on B360. It doesn't matter if I have no root
Sheldd said:
I think i know what you have done wrong, you didnt flashed the rollback package.
Here you have the rollback package for your device http://download-c.huawei.com/download/downloadCenter?downloadId=92134&version=363841&siteCode=it-h
Here you have the firmware, just to be sure it's the corect one http://download-c.huawei.com/download/downloadCenter?downloadId=92104&version=360397&siteCode=it-h
Now the proces is simple.
First, unzip the rollback package, copy the update.app to dload folder and do the force update (Press and hold Volume UP+Volume Down+Power Button)
Second do the same things but now with the update.app from the B131 firmware zip.
DONT PUT BOTH update.app at once. First the rollback update.app and then the B131 update.app.
Click to expand...
Click to collapse
Ive tried this and i'm stuck at 5% of the rollback any suggestions
how to restore my emui

Honor 8 total brick !

Hello guys !
First of all, thank you to you all for all the help i've already found on the forum.
I've got an Honor 8, and I tried to flash it for solving battery drain.
After several attempts and almost get there, now the phone is totally bricked.
Here some useful information:
- Bootloader in unlocked
- When in fastboot mode, Fastboot recognize my device but not ADB. I tried installing several drivers but nothing
- Flashing different recovery from fastboot don't work. I mean, it works but the device don't enter in recovery mode ( stuck in Your device is booting now....)
When try to install an update.app from stock recovery, i get error, both unable to find the package and unable to verify the package content.
When first I wasable to get in TWRP, when trying flashing a rom, it alwayg gaves me error like UNABLE TO MOUNT /DATA or /CACHE.
I think I really messed up with partitions and now everything seems doesn't be able to get into the phone.
I started yesterday, still here....
I guess dozens of users encountered same problems, I've tried everythinh from the forum but nothing worked....
Someone has any idea ? Cause my girlfriend will soon kill me.....
Yeah, even with volume up and power. It stuck on boot.
I've tried the most common fix, tried several twrp and rom. Same for update from SD, tried everything, différents rom, rollback....
Nothing...
Rommco05 said:
What happens when you hold +/-/off,on together?
Click to expand...
Click to collapse
It starts in automatic update mode. When trying to connect to WI-FI and download, an error message appear, seems unable to found the update.
When trying to update from SD, several update.app has failed.
When trying to clean all data from Emui recovery mode, the first 2 attempt stops at 7%, the third stops at 99%. Every time i have tried...
I really think is a partition issues, something that don' let the firmware recognize the phone and get the update
Rommco05 said:
Whitch model you have and witch fw you had installed before problem?
Click to expand...
Click to collapse
I have a FRD-L09 and i had the last update B380
Yeah the rollback package revives any brick. I've been through it all once and this will fix any mess so find a way to flash it.
By the way to access recovery you need to have your phone not plugged to USB (that's the bit i was missing for a long time) With your phone completely off (you can turn it off from the eRecovery (vol+ vol- power) ) hold vol+ & power and when the phone vibrates let go off the power and just hold vol+
http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92131 and then flash B131 fw
http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92101
if you can't get into recovery use huawei firmware extractor and get a recovery.img from one of those firmware packages and flash it via fastboot mode.
sysak said:
Yeah the rollback package revives any brick. I've been through it all once and this will fix any mess so find a way to flash it.
By the way to access recovery you need to have your phone not plugged to USB (that's the bit i was missing for a long time) With your phone completely off (you can turn it off from the eRecovery (vol+ vol- power) ) hold vol+ & power and when the phone vibrates let go off the power and just hold vol+
http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92131 and then flash B131 fw
http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92101
if you can't get into recovery use huawei firmware extractor and get a recovery.img from one of those firmware packages and flash it via fastboot mode.
Click to expand...
Click to collapse
Ok, tries, an error message says "impossible to find the package".
Maybe there are some issues with the SD card formatting, so he's not able to get into the dload folder ?
Rommco05 said:
Can you try another sd card or format on pc?
Click to expand...
Click to collapse
In FAT32 ?
Tonioparis said:
Ok, tries, an error message says "impossible to find the package".
Maybe there are some issues with the SD card formatting, so he's not able to get into the dload folder ?
Click to expand...
Click to collapse
did you extract the rollback package?
and yes important to put extracted update.app into dload folder on SD and unplug your device while doing this
if not flash stock recovery, system and so one with huawei extractor from your current running rom
you can enter fastboot mode, turn off your device and hold volume down + power, try this with plugged or unplugged device, but must be turned off..if this helps enter fastbootmode, then flash the extracted images
Dimontiman said:
did you extract the rollback package?
and yes important to put extracted update.app into dload folder on SD and unplug your device while doing this
if not flash stock recovery, system and so one with huawei extractor from your current running rom
you can enter fastboot mode, turn off your device and hold volume down + power, try this with plugged or unplugged device, but must be turned off..if this helps enter fastbootmode, then flash the extracted images
Click to expand...
Click to collapse
Hey...Seems to be working....:cyclops::cyclops::cyclops:
Rommco05 said:
after format card?
Click to expand...
Click to collapse
YYYESSSSSSSSS !!!!
All this time I tried everything and it was the SD card....formatted in NTFS....
MANY THANKS GUYS !!
Now, meanwhile I needed a phone and I got a P10....
Anyone need an Honor 8???
eheh
Yeah, of coure ! Was a joke, means I should probably learn patience
Just another question : when power on now there's no "You can't trust your device".
May I assule that now the bootloader is blocked ?
Thanks again to you all guys !
Rommco05 said:
Yes now is bootloader relocked, you can try again experiments but be carefull and read before anything you do and dont know what you do
Click to expand...
Click to collapse
I guess i'll still like that eheh.
My only concern is about battery drain. I'll try to stay with marshmallow and see if is better than Nougat !
Rommco05 said:
Noo Nougat is match better! https://forum.xda-developers.com/showpost.php?p=72177403&postcount=133
Click to expand...
Click to collapse
uhm but I cannot get the B381 OTA, isn it ?
Rommco05 said:
Dont wait for OTA, use Firmware Finder or flash via twrp...
Click to expand...
Click to collapse
you mean maees around with the bootloader again eh ? ahah
Ok i downloaded the full OTA, but how to install it directly ?
Tonioparis said:
Ok i downloaded the full OTA, but how to install it directly ?
Click to expand...
Click to collapse
Update process:
1. Unzip [extract] the update.zip to the SD card into the dload folder (if folder is not present, create it yourself)
2. In the phone app, enter the combination *#*#2846579#*#*, then select "Software Upgrade" and
The update from SD start
3. Delete the data in the dload folder
4. Repeat point 1-3 with the update_data_full_hw_eu.zip
5. WipeCache (personal recommendation)

Honor 8 weird glitch wont let me pass setup

Hi I just bought my honor 8, i unlocked my bootloader, then tried flashing twrp, it said it worked, but it just went to EMUI recovery. I must of flashed the wrong one, it was the american one from twrp.me. I am on emui 5.0. So then i went to developer option and accidently clicked revert to default settings, which turned off my oem unlock. so this turned FRP lock back on. I had the bootloader still unlocked so i tried flashing surdas twrp this time, and it failed. so i rebooted my phone and it went to the recovry and said it got seriously data corrupt or something and said to repair so i did, then i rebooted and it went to setup. but now it wont let me get through the setup because i cant type.. it just brings up google voice typing. So somethings messed up.
Model is FRD-L14
Emui 5.0
the bootloader is currently locked.
FRP lock is on.
I can get to fastboot, recovery and it boots up to setup.
Any help would be greatly appreciated! I don;t know how i can fix this.
Is there any way i can flash stock rom and recovery in like download mode or something?
I have simlar issue to this https://forum.xda-developers.com/honor-8/help/help-keyboard-google-voice-t3629372
Rommco05 said:
Big mistake and double post... downgrade
Click to expand...
Click to collapse
I dont understand how I downgrade. I have a locked bootloader and no custom recovery.
Use a sdcard and create a directory "dload". In this directory first place the rollback UPDATE.APP. Use the 3-button combo to enter dload mode. Then once done change that UPDATE.APP with the B130 (EMUI 4.1) UPDATE.APP of your device. Again enter dload mode and you should have successfully downgraded.
You can now upgrade from software updater to EMUI 5.0.
Anonshe said:
Use a sdcard and create a directory "dload". In this directory first place the rollback UPDATE.APP. Use the 3-button combo to enter dload mode. Then once done change that UPDATE.APP with the B130 (EMUI 4.1) UPDATE.APP of your device. Again enter dload mode and you should have successfully downgraded.
You can now upgrade from software updater to EMUI 5.0.
Click to expand...
Click to collapse
Where do I get the rollback update.app? I'm model FRD-L14 but theirs so many versions in firmware finder.
Do i have to extract the UPDATE.APP file into the dload folder?
OathYvne said:
Where do I get the rollback update.app? I'm model FRD-L14 but theirs so many versions in firmware finder.
Do i have to extract the UPDATE.APP file into the dload folder?
Click to expand...
Click to collapse
http://download-c1.huawei.com/download/downloadCenter?downloadId=92790&version=363861&siteCode=pt
Download the rollback from above and after extraction copy the UPDATE.APP file into the dload folder. Once done replace this with the B120/B130 UPDATE.APP.
You don't need to extract the UPDATE.APP but extract the update.zip which would give you the UPDATE.APP to be copied into the dload folder.
Anonshe said:
http://download-c1.huawei.com/download/downloadCenter?downloadId=92790&version=363861&siteCode=pt
Download the rollback from above and after extraction copy the UPDATE.APP file into the dload folder. Once done replace this with the B120/B130 UPDATE.APP.
You don't need to extract the UPDATE.APP but extract the update.zip which would give you the UPDATE.APP to be copied into the dload folder.
Click to expand...
Click to collapse
Okay thanks for explaining it well for me :]. One last question (hopefully lol) where do i get the b120/b130 update app for my frd-L14 model? thanks!
OathYvne said:
Okay thanks for explaining it well for me :]. One last question (hopefully lol) where do i get the b120/b130 update app for my frd-L14 model? thanks!
Click to expand...
Click to collapse
For your model the EMUI 4.1 version is B162 which you can download from http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1201/g88/v66294/f1/full/update.zip
Anonshe said:
For your model the EMUI 4.1 version is B162 which you can download from http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1201/g88/v66294/f1/full/update.zip
Click to expand...
Click to collapse
Thanks alot man :].
once i do all of this, and then after i update my emui to 5.0. How exactly do I properly install twrp? lol.
I figured out how to unlock my bootloader, but i don't know how to install the proper twrp version without bricking my device. Then i'd be installing a lineage os rom after i have twrp, which i know how to do from using my galaxy s4 .
OathYvne said:
Thanks alot man :].
once i do all of this, and then after i update my emui to 5.0. How exactly do I properly install twrp? lol.
I figured out how to unlock my bootloader, but i don't know how to install the proper twrp version without bricking my device. Then i'd be installing a lineage os rom after i have twrp, which i know how to do from using my galaxy s4 .
Click to expand...
Click to collapse
Once you are on emui 5.0, make sure you enable developer options and keep the oem unlock option ON. Then enable usb debugging and reboot to fastboot using your PC and typing "adb reboot fastboot".
Once in fast boot mode, first unlock your boot loader using "fastboot oem unlock CODE". This will prompt for a factory reset and once done repeat the above in developer options and enter fast boot mode again. You can simply type "fastboot flash recovery /path/to/recovery.img" where the recovery.img is the one you download from https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Voila you have successfully flashed twrp and now can flash whichever rom you want.
Anonshe said:
Once you are on emui 5.0, make sure you enable developer options and keep the oem unlock option ON. Then enable usb debugging and reboot to fastboot using your PC and typing "adb reboot fastboot".
Once in fast boot mode, first unlock your boot loader using "fastboot oem unlock CODE". This will prompt for a factory reset and once done repeat the above in developer options and enter fast boot mode again. You can simply type "fastboot flash recovery /path/to/recovery.img" where the recovery.img is the one you download from https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Voila you have successfully flashed twrp and now can flash whichever rom you want.
Click to expand...
Click to collapse
Thanks so much!
Anonshe said:
Once you are on emui 5.0, make sure you enable developer options and keep the oem unlock option ON. Then enable usb debugging and reboot to fastboot using your PC and typing "adb reboot fastboot".
Once in fast boot mode, first unlock your boot loader using "fastboot oem unlock CODE". This will prompt for a factory reset and once done repeat the above in developer options and enter fast boot mode again. You can simply type "fastboot flash recovery /path/to/recovery.img" where the recovery.img is the one you download from https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Voila you have successfully flashed twrp and now can flash whichever rom you want.
Click to expand...
Click to collapse
I've come into a problem. I've installed twrp and everything, but now im trying to flash a lineageos rom. when i try to wipe and format the data it says it failed: failed to mount /data device or resource busy unable to mount storage.
I went into mount and i have cache, vendor, and micro sdcard selected. also "mount system partition read-only" selected aswell. my storage selected says 0 MB.
Any idea what to do?
Rommco05 said:
Which twrp u flash?
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-8/development/twrp-t3566563 this one
OathYvne said:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563 this one
Click to expand...
Click to collapse
Make sure you turn off FRP lock.
If you have FRP locked it is because you didn't enable OEM Unlock in EMUI 4.1
Read https://forum.xda-developers.com/showpost.php?p=71618439&postcount=275 and the subsequent posts for clarity.
Anonshe said:
If you have FRP locked it is because you didn't enable OEM Unlock in EMUI 4.1
Read https://forum.xda-developers.com/showpost.php?p=71618439&postcount=275 and the subsequent posts for clarity.
Click to expand...
Click to collapse
I fixed the issue. FRP was already unlocked. But I just advance wiped the data on those and it fixed the issue. Thanks man. Do you know what the most stable 7.1.2 ROM is? Cause I just used the lineageos 14.1 one and it randomly reboots on me when I have music playing, actually its just random in general.
OathYvne said:
I fixed the issue. FRP was already unlocked. But I just advance wiped the data on those and it fixed the issue. Thanks man. Do you know what the most stable 7.1.2 ROM is? Cause I just used the lineageos 14.1 one and it randomly reboots on me when I have music playing, actually its just random in general.
Click to expand...
Click to collapse
Try RR.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Try RR.
Click to expand...
Click to collapse
Carbon is my choice
gopinaidu77 said:
Carbon is my choice
Click to expand...
Click to collapse
Awesome ROM there.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Awesome ROM there.
Click to expand...
Click to collapse
Yeah it is
Anonshe said:
If you have FRP locked it is because you didn't enable OEM Unlock in EMUI 4.1
Read https://forum.xda-developers.com/showpost.php?p=71618439&postcount=275 and the subsequent posts for clarity.
Click to expand...
Click to collapse
I have come into a bit of a problem. I turned off or unlocking in developer options, then I rebooted my phone and it just bootlooped. So I did the thing you told me to do before with the roll back and the 4.1 emui. That all went fine, but after it finished installing 4.1 and restarted it's in bootloops still :/

Honor 6x only boots into eRecovery mode.

Alright. I have an honor 6x which I attempted to root. I flashed the twrp wrong, and I then was stuck in a bootloop of sorts where it would bring me back to the "Your phone has been unlocked and can't be trusted." screen from unlocking bootloader. I let the battery die, and on that screen once it got some charge, it gave me the option to go to eRecovery. I did that and was able to shut the phone down completely. I then put it in fastboot mode. Through that, I re-locked the bootloader. Done!... not quite. Then, I turned the phone on. Now it only boots into eRecovery mode. I have no idea what the problem is or if it can be fixed. Any help would be received gratefully. Thank you!
which version of device(BL..) and do you bricked on EMUI 4.1 or 5 ?
In worst of cases, are you able to wipe data from eRecovery menu?
Why did you relock bootloader? Not a good idea.
Sent from my Honor 8 using XDA Labs
venugopalu007 said:
which version of device(BL..) and do you bricked on EMUI 4.1 or 5 ?
Click to expand...
Click to collapse
BLN L24
EMUI 5 Android 7
RedSkull23 said:
In worst of cases, are you able to wipe data from eRecovery menu?
Click to expand...
Click to collapse
On eRecovery screen there isn't that option. Updating thru it doesn't work so my only eRecovery options are reboot or shut down.
Fatefulostrich said:
BLN L24
EMUI 5 Android 7
Click to expand...
Click to collapse
step 1: download this -->http://download-c1.huawei.com/download/downloadCenter?downloadId=94205&version=377711&siteCode=us
step 2: extract the zip which you downloaded in that copy the UPDATE.APP to sdcard/dload floder
step3: now power off the phone and hold all three buttons and after vibrate release the power button , it updates successfully , now.
step 4: download this -- >http://download-c1.huawei.com/download/downloadCenter?downloadId=94230&version=377728&siteCode=us
step 5: extract the zip which you downloaded in that copy the UPDATE.APP to sdcard/dload floder (delete the old one )
step 6: now power off the phone and hold all three buttons and after vibrate release the power button, it updates successfully now
and now just reset once . your phone will works 100% .
I attached a pdf to how to rollback.
venugopalu007 said:
step 1: download this -->http://download-c1.huawei.com/download/downloadCenter?downloadId=94205&version=377711&siteCode=us
step 2: extract the zip which you downloaded in that copy the UPDATE.APP to sdcard/dload floder
step3: now power off the phone and hold all three buttons and after vibrate release the power button , it updates successfully , now.
step 4: download this -- >http://download-c1.huawei.com/download/downloadCenter?downloadId=94230&version=377728&siteCode=us
step 5: extract the zip which you downloaded in that copy the UPDATE.APP to sdcard/dload floder (delete the old one )
step 6: now power off the phone and hold all three buttons and after vibrate release the power button, it updates successfully now
and now just reset once . your phone will works 100% .
I attached a pdf to how to rollback.
Click to expand...
Click to collapse
I got to step 3, and it says Software install failed! The update package does not exhist. Please download the package again. Should I try to return to best buy? I have 14 days since monday (today is thursday) and the bootloader is locked again.
Fatefulostrich said:
I got to step 3, and it says Software install failed! The update package does not exhist. Please download the package again. Should I try to return to best buy? I have 14 days since monday (today is thursday) and the bootloader is locked again.
Click to expand...
Click to collapse
Did you copied the update.app to dload folder?
venugopalu007 said:
Did you copied the update.app to dload folder?
Click to expand...
Click to collapse
Yes, I did. I do have to mention that before I copied the update.app, I had to make a dload folder.
Fatefulostrich said:
Yes, I did. I do have to mention that before I copied the update.app, I had to make a dload folder.
Click to expand...
Click to collapse
Download the files from the link and flash them through dload. No need to unzip and install stock recovery.
Sent from my Honor 8 using XDA Labs
Fatefulostrich said:
Yes, I did. I do have to mention that before I copied the update.app, I had to make a dload folder.
Click to expand...
Click to collapse
Yes u had to make new folder dload , and copy the file to card and follow
Fatefulostrich said:
Alright. I have an honor 6x which I attempted to root. I flashed the twrp wrong, and I then was stuck in a bootloop of sorts where it would bring me back to the "Your phone has been unlocked and can't be trusted." screen from unlocking bootloader. I let the battery die, and on that screen once it got some charge, it gave me the option to go to eRecovery. I did that and was able to shut the phone down completely. I then put it in fastboot mode. Through that, I re-locked the bootloader. Done!... not quite. Then, I turned the phone on. Now it only boots into eRecovery mode. I have no idea what the problem is or if it can be fixed. Any help would be received gratefully. Thank you!
Click to expand...
Click to collapse
first of all it is a surprise that ur phone gets charged after u let it die(bcoz mine doesnt wake up till now after the same instance).
and for ur problem if it boots in erecovery mode then there will be a option like downloading os from internet and if u select that it will automatically get installed in android mm
SRI HARI RAJAN said:
first of all it is a surprise that ur phone gets charged after u let it die(bcoz mine doesnt wake up till now after the same instance).
and for ur problem if it boots in erecovery mode then there will be a option like downloading os from internet and if u select that it will automatically get installed in android mm
Click to expand...
Click to collapse
No , it will not work , i dont know the reason y the Huawei is included the erecovery , buggy erecovery every time .
May he give a try.
Rommco05 said:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v82815/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...24_hw_usa/update_data_full_BLN-L24_hw_usa.zip
Try this firmware is BLN-L24C567B360
But I don't remember if must ziped or unzipped, so try both
edit: if this doesn't work probably u need first flash stock recovery...
Click to expand...
Click to collapse
The first one seems to be working. Thank you so much, and everyone who helped me during this. I was really freaked out, but its working now. Thanks everyone.
Fatefulostrich said:
The first one seems to be working. Thank you so much, and everyone who helped me during this. I was really freaked out, but its working now. Thanks everyone.
Click to expand...
Click to collapse
Sounds fantastic
You are welcome .
Good rommoco05
Rommco05 said:
Great! I happy with you please I have question, you unzip files or not?
Click to expand...
Click to collapse
I actually copied both to that path on the sd card. I am not sure which one it used though.
Rommco05 said:
You copied both together same time to dload? Was unziped or not?
Click to expand...
Click to collapse
But his device is successfully working
I found that my phone got into that same state (always booting to eRecovery) if I flashed a replacement recovery2 and re-locked the bootloader; apparently Huawei doesn't like that. I just had to boot to fastboot and unlock the bootloader again, then it was able to start up to System.
It sounds like OP was able to fix it by restoring the original recovery2.

eRecovery stops at 5% - Bricked?

Hi guys,
so i just had my Honor 8 on Android 7 (EMUI 5.0?) rooted and unlocked but wanted to unroot and relock. I used a tutorial for that but i think i made a mistake.
Now I stuck on the honor 8 bootscreen. I can enter fastmode and the recovery but my battery is always low.
I used the rollback package but it didnt install. Also a factory reset from the stock recovery doesnt work.
I also tried a method from here where you flash the cust.img boot.img recovery.img and the system.img from the stock an then flash the Update.app via eRecovery but this also didnt work. It stucks at 5% and does nothing. I am also not able to get to the eRecovery without pluging in the usb into the pc.
Is there any possibility to save my honor? Data's all saved.
I tried it with the rollback package, the B101 and B131 i think.
Thanks,
Musti
Hello, what is your Honor 8 model number? (L04/L09/L19/etc.)
Sorry, FRD-L09
Musti222 said:
Sorry, FRD-L09
Click to expand...
Click to collapse
What you can do is to try to flash firmware via TWRP.
Follow this guide (use "FRD-L09" link ofc...): https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
And after TWRP flash, you should flash this firmware (L09 link instead of L19 link of the guide) via dload folder method: FRD-L09C432B131
If you need help to find TWRP version, see my post : here
Do the method where you flash cust.img system.img etc but this time you boot into recovery and factory reset, then just boot, i do this everytime

Categories

Resources