Related
[solved] mtk 6589, sim not detected, baseband & radio loss, invalid imei. After flas
Hello.
I recently bought a Chinese phone MTK6589 (XYZ X1).
The first thing I did was do a full backup with MTKDroidTools.
When you upgrade to the latest official ROM and on the phone, SIM card detected stopped.
Update with backup from SP Flash Tools, but the SIM was not detected.
So as it was under warranty I returned the phone and switch to another.
I got the following phone MTK6589T (Pomp W99), again made an initial backup.
Install TWRP recovery and restart, same problem. Sim undetected.
When trying to install flash backup with SP Tools, the program did not detect the device.
So I had the phone and not the sim calls undetected Radio Baseband & empty and invalid IMEI.
To fix this we need to have previously made a backup with MtkDroidTools and convert it to SP Flash Tool If you do not have the backup, will have to look to find a full ROM for our device.
When trying to flash with SP, giving Error 3013 and did not recognize the device, the solution for this is only the first flash preloader and then again perform full flashing.
I did so but the phone was the same, so keep a thousand forums looking for the solution without success.
So you lost mobile giving, what I've done is a full format from SP flash tool (Format option), to leave completely empty.
And then flash the backup made with MtkDroidTools but scatter loading in the sec_ro and userdata.nvram.only
When you turn on the phone, this recognized the SIM! But was invalid IMEI.
So I went into engineer mode (keypad, * # * # 3646633 # * # *)
CDS info
Radio Settings
Phone 1: Insert the command at + egmr = 1.7 "IMEI1"
Phone 2: Insert the command at + egmr = 1.10 "imei2"
When you restart the phone and everything worked fine.
A greeting
Do you have the complete rom for pomp w99? Would you please post it here? Another thing, what cwm/TWRP souls I use?
Thanks!
cherry mobile apollo no service detected after flashing
sir do u have a full rom for this model?
Can i used for mtk 6575..?
Because i have same problemo.
Alerba13 said:
Can i used for mtk 6575..?
Because i have same problemo.
Click to expand...
Click to collapse
Same for me, i try a lot of method but no radio no IMEI
yseku said:
Hello.
I recently bought a Chinese phone MTK6589 (XYZ X1).
The first thing I did was do a full backup with MTKDroidTools.
When you upgrade to the latest official ROM and on the phone, SIM card detected stopped.
Update with backup from SP Flash Tools, but the SIM was not detected.
So as it was under warranty I returned the phone and switch to another.
I got the following phone MTK6589T (Pomp W99), again made an initial backup.
Install TWRP recovery and restart, same problem. Sim undetected.
When trying to install flash backup with SP Tools, the program did not detect the device.
So I had the phone and not the sim calls undetected Radio Baseband & empty and invalid IMEI.
To fix this we need to have previously made a backup with MtkDroidTools and convert it to SP Flash Tool If you do not have the backup, will have to look to find a full ROM for our device.
When trying to flash with SP, giving Error 3013 and did not recognize the device, the solution for this is only the first flash preloader and then again perform full flashing.
I did so but the phone was the same, so keep a thousand forums looking for the solution without success.
So you lost mobile giving, what I've done is a full format from SP flash tool (Format option), to leave completely empty.
And then flash the backup made with MtkDroidTools but scatter loading in the sec_ro and userdata.nvram.only
When you turn on the phone, this recognized the SIM! But was invalid IMEI.
So I went into engineer mode (keypad, * # * # 3646633 # * # *)
CDS info
Radio Settings
Phone 1: Insert the command at + egmr = 1.7 "IMEI1"
Phone 2: Insert the command at + egmr = 1.10 "imei2"
When you restart the phone and everything worked fine.
A greeting
Click to expand...
Click to collapse
@yseku
Would you please post here your mtkdroidtools backup for pomp w99?
Mine was giving error so I´ve deleted it... now I have the same problem as yours and don´t have a backup...
Please please please help...
Hello,
Basically this is the procedure I followed.
I'm uploading the backup to MEGA, it takes about 2 hours ...
I think it should work on any MTK (6589,6575...)
Greetings
yseku said:
Hello,
Basically this is the procedure I followed.
I'm uploading the backup to MEGA, it takes about 2 hours ...
I think it should work on any MTK (6589,6575...)
Greetings
Click to expand...
Click to collapse
@yseku, thank you so much for your good will and fast response! Will be waiting for the link with the mtkdroidtools POMP W99 complete backup...
I own you one... Please fell free to ask for help if you need anything...
yseku said:
Hello,
Basically this is the procedure I followed.
I'm uploading the backup to MEGA, it takes about 2 hours ...
I think it should work on any MTK (6589,6575...)
Greetings
Click to expand...
Click to collapse
Using MobileUncle Tools app I have tried to update my recovery, I searched and downloaded a recovery using mobile uncle and installed it, again, using mobile uncle. I now don't have a recovery and can't find any signal, on mobile uncle I have it shows I have No IMEI, no internet no sim detected radio loss all gone and your method above does not work unfortunatly as it said Write Failed, Any ideas?
I cant post external links on the forum, until I have 10 posts...
No problem... Upload it as image...
ZakBrindle said:
Using MobileUncle Tools app I have tried to update my recovery, I searched and downloaded a recovery using mobile uncle and installed it, again, using mobile uncle. I now don't have a recovery and can't find any signal, on mobile uncle I have it shows I have No IMEI, no internet no sim detected radio loss all gone and your method above does not work unfortunatly as it said Write Failed, Any ideas?
Click to expand...
Click to collapse
It must be the error you´re getting... Try other versions of sp flash tool... Put back your previous recovery with mobileuncletools if you can boot to android OS...
yseku said:
posting...
Click to expand...
Click to collapse
Ready for downloading as soon as you post!
eteles said:
It must be the error you´re getting... Try other versions of sp flash tool... Put back your previous recovery with mobileuncletools if you can boot to android OS...
Click to expand...
Click to collapse
I can boot to my Android OS, how do i revert to an old recovery? Keeping in mind i currently have no recovery :/
eteles said:
It must be the error you´re getting... Try other versions of sp flash tool... Put back your previous recovery with mobileuncletools if you can boot to android OS...
Ready for downloading as soon as you post!
Click to expand...
Click to collapse
Link on previous post
ZakBrindle said:
I can boot to my Android OS, how do i revert to an old recovery? Keeping in mind i currently have no recovery :/
Click to expand...
Click to collapse
You have to have a backup of your old recovery.img... Put it in the root of sdcard, open mobileuncle, recovery update, you will see the file there, select and confirm.
yseku said:
I cant post external links on the forum, until I have 10 posts...
No problem... Upload it as image...
Click to expand...
Click to collapse
I will try that now, thank you
yseku said:
Link on previous post
Click to expand...
Click to collapse
Thank you so much!!
Here´s the link for the complete MTKDroidTolls backup for POMP W99 that you uploaded: https://mega.co.nz/#!Yw1RHCjD!ZeGCQAZ_luRD1B9XPCqfdASOoBZYGvmVF5L4633hwgs
Just to help other people with different problems, here´s the link for the CWM flashable stock ROM for POMP W99 (thanks to @tribual): http://uploaded.net/file/7ie3n8s5
and here´s the link for CWM recovery 6.0.4.4 for POMP W99 (thanks to @tribual) http://www60.zippyshare.com/v/62999584/file.html
eteles said:
You have to have a backup of your old recovery.img... Put it in the root of sdcard, open mobileuncle, recovery update, you will see the file there, select and confirm.
Click to expand...
Click to collapse
I dont have a backup of my old recovery :/ lost it accidently as usb currupt
eteles said:
Thank you so much!!
Here´s the link for the complete MTKDroidTolls backup for POMP W99 that you uploaded: https://mega.co.nz/#!Yw1RHCjD!ZeGCQAZ_luRD1B9XPCqfdASOoBZYGvmVF5L4633hwgs
Just to help other people with different problems, here´s the link for the CWM flashable stock ROM for POMP W99 (thanks to @tribual): http://uploaded.net/file/7ie3n8s5
Click to expand...
Click to collapse
Downloading Now
ZakBrindle said:
I dont have a backup of my old recovery :/ lost it accidently as usb currupt
Downloading Now
Click to expand...
Click to collapse
I´ve just posted another link with CWM recovery... Tested and working... Try this one if you want CWM... Or you can download the complete ROMs and extract the recovery.img file
eteles said:
I´ve just posted another link with CWM recovery... Tested and working... Try this one if you want CWM... Or you can download the complete ROMs and extract the recovery.img file
Click to expand...
Click to collapse
Sorry probably a dumb question, one ive downloaded the
POMP_W99_130807_backup_130922-123036 file
what do i do?
ZakBrindle said:
Sorry probably a dumb question, one ive downloaded the
POMP_W99_130807_backup_130922-123036 file
what do i do?
Click to expand...
Click to collapse
unzip it, find recovery.img file, put it in the root of the sd card, open mobile uncle tools, recovery update, select the file and install...
Like this you will get your stock recovery back...
To restore the baseband and imei it´s more complex... please read previous posts (page 1)
Hi i am posting this thread because i couldn't find any good tutorial that helped you for flash the stock Rom of Alcatel one touch flash 6042d
THINGS BEFORE YOU REQUIRED TO FLASH STOCK ROM OF ALCATEL ONE TOUCH FLASH 6042D
1.Download the stock ROM(the link is given below)
2.Download the flash Tool(Given below)
3.Usb driver(Given below)
4.A window PC
5.Patience
6.Last and very important some Mind.
STEP:-1
1.First install the driver to your pc which is necessary.Without installing the necessary driver processing further proceeding is only waste of time.If you do not install driver correctly then you do not install the rom correctly.
2.Second,Check that any another usb driver related to your mobile is not installed on your PC using USB DEVIEW(Download it from link below).If you have any type of driver installed related to Mt65xx the uninstall it or related to any type of android driver uninstall it.I am providing the link of youtube see there how to install the driver. (https://www.youtube.com/watch?v=PAxTCvRmlio).
STEP :-2(HOW TO INSTALL DRIVER)
1. After uninstalling all the related driver to your mobile and other mobile, proceed further.
2. Switch off your mobile phone and go to device manager in PC (In window 8.1 right click on my pc or my computer and then select manage, another procedure is from control panel)
3. Connect your mobile to PC in switch off condition and in device manger PORT SECTION your device is detected.You have only 5 second to selecting on your PC(in package driver are given, install acc. to your PC 32/64 bit) so do Hurry.When you are selecting the driver your mobile start charging don't worry select the driver folder.If you have problem in installing driver like digital signature then search google how to disable it and install it.
4. You think that why we are selecting the driver to port section it is because the mobile have only 5 seconds to start charging in off condition.In those 5 seconds if any data is not send to mobile the mobile start itself.
STEP:-3(LAST STEP to flashing rom)
1. This is easy step.First you have to open the sp flash tool and select flashtool.exe.
2. After opening the sp flash tool select the scatter text file which is in the package of ROM.
3.Select the scatter text file.
4. Then click on download button.
5. Be sure that you check that the mobile phone is in switch off condition and then connect your mobile to your PC.
6. Your mobile is detected and flashing start and takes few minutes.After successful flashing ok sign comes,close it.
7. Remove your device and on it.First booting takes 6-7 minutes.If you find that mobile is stucked at animated alcatel one touch flash boot logo and vibrating again and again .Then go to recovery and clear cache and start it.
DOWNLOAD STOCK ROM of ALCATEL ONE TOUCH FLASH 6042D(http://www.mediafire.com/download/a..._one_touch_flash_stock_rom_and_flash_tool.zip)
DOWNLOAD USB DEVIEW (http://www.mediafire.com/download/5urdr4981m5codw/USBDEVIEW.zip )
If any problem post it.
If you like my work, please HIT Thanks Button
Good job done sir..... After long time got success ...
Really interesting Thank you for this Information! :good:
Flashed but it doesn't look like flashed.
I flashed the ROM. But unfortunately, It didn't work. The process was complete 100%. But when I started the phone, After Alcatel Onetouch Smart Move boot animation screen, there was a screen showing -: "Android is Upgrading. Optimizing Apps".... and when it started, every app was already there.
My phone was rooted earlier. But superSU says it isn't rooted. Also when I go to system updates, it says "Device has detected root". Did you root your mobile before dumping this ROM???
After flashing your previous apps installed in your mobile is still there because the flash process does not successfully completed.Try again to reflash ROM.
And this ROM is actually updated so that you don't find system update.
..
Flashed But nothing is changed
I did exactly as you posted and flashing completed successfully, but nothing is changed and all my old apps are there.
gamerWeirdo said:
I did exactly as you posted and flashing completed successfully, but nothing is changed and all my old apps are there.
Click to expand...
Click to collapse
Try to flash this ROM through this version of SP flash tool ( http://www.4shared.com/rar/eRE4YvIsba/SP_Flash_Tool_v313360198.html#)
If it does not work then SELECT FORMAT ALL + DOWNLOAD in SP flash tool.Then flash ROM but backup your imei before doing this.
Well, I didn't do reflash. But I did a factory reset after flashing and it's okay now. System update also says that your phone is upto date. What I think the reason for that is during sp tool flashing, the check on "user data" was not there. So user data remained the same from previous.. What do you think?
And the link for ROM you gave in the above post, what's the difference?
hvsharma said:
Well, I didn't do reflash. But I did a factory reset after flashing and it's okay now. System update also says that your phone is upto date. What I think the reason for that is during sp tool flashing, the check on "user data" was not there. So user data remained the same from previous.. What do you think?
And the link for ROM you gave in the above post, what's the difference?
Click to expand...
Click to collapse
I think you are right bro.
Sent from 6042D using XDA Free mobile app
Hi,
After following above steps my IMEI is shown as Invalid.. Pls hlp
---------- Post added at 12:12 PM ---------- Previous post was at 11:57 AM ----------
Guys I had lost my IMEI after using this method. luckily I had cwm back up so i re-flashed cwm back up and than flashed this stock rom again without enabling data tick and everything is cool now
jhalife said:
Hi,
After following above steps my IMEI is shown as Invalid.. Pls hlp
---------- Post added at 12:12 PM ---------- Previous post was at 11:57 AM ----------
Guys I had lost my IMEI after using this method. luckily I had cwm back up so i re-flashed cwm back up and than flashed this stock rom again without enabling data tick and everything is cool now
Click to expand...
Click to collapse
You mean USRDATA ?
AmrikSingh said:
You mean USRDATA ?
Click to expand...
Click to collapse
Yes. God Knows how restoring CWM back up and than reflashing brought my IMEI back bt m happy thanks for the ROM
jhalife said:
Yes. God Knows how restoring CWM back up and than reflashing brought my IMEI back bt m happy thanks for the ROM
Click to expand...
Click to collapse
Bro but the ROM i uploaded does not have USRDATA so that by default USRDATA it is unticked.And you are telling that you untick the USRDATA and the flash the ROM ?
:angel::angel:
yaa but I hd selected Download+format all so everythinn hd got tick in 1st attemp anyways now it is resolved
Please, can somebody tell me if this Rom has spanish language? Thank you
Hi Amrik, Today I happened to do factory reset of my phone which was updated using your ROM. unfortunately just by using factory data reset in cwm option I have lost my In. Please help me out. I had taken cwm back up but that back up is not getting flashed I get an error that unable to restore data! and my phone is without imei. any help would be appreciated.
Finally fixed it again. Luckily I had cwm back up of 6months old from which i restored data partition using advanced restore in cwm and my IMEI is back
To all the crowd here it is recommended to have cwm back up before flashing this stock rom as cwm back up after flashign this stock rom fail to flash data partition & mind you MTK droid tools, mobile uncle mtk all fail to restore IMEI.
So please take a back up before of entire rom and dat apartition specially which can save you big time later.
can you give new link, i can't download.. please help
Pls provide a working link, is the stock roms stable? thanks
Help! Link not working.
Sir,
The download link for the ROM seems to be broken. Please help.
I'm facing strange problem with my Q3000 after flashing custom ROM.
I will explain once again if looking at my problem can anyone provide me solution.
1) I tried to flash custom rom and while flash something happened n my phone goes off.
2) I format EMMC using SP_Flash_Tool_v5.1420.03 and then flash stock ROM KK.
3) After flashing Phone boot but with no IMEI no and no network.
4) I then used MTK Droid Root & Tools V2.5.3 and replace with correct IMEI no. and confirmed using softwares as well as *#06#
5) but still no network.
6) I do Memory Test using SP_Flash_Tool_v5.1420.03 and found ERROR: NAND Flash was not detected!
Please help in resolving this issue. I tried all possible help from this forum like flashing stock ROM JB n KK but no luck.
shinde_bharat said:
I'm facing strange problem with my Q3000 after flashing custom ROM.
I will explain once again if looking at my problem can anyone provide me solution.
1) I tried to flash custom rom and while flash something happened n my phone goes off.
2) I format EMMC using SP_Flash_Tool_v5.1420.03 and then flash stock ROM KK.
3) After flashing Phone boot but with no IMEI no and no network.
4) I then used MTK Droid Root & Tools V2.5.3 and replace with correct IMEI no. and confirmed using softwares as well as *#06#
5) but still no network.
6) I do Memory Test using SP_Flash_Tool_v5.1420.03 and found ERROR: NAND Flash was not detected!
Please help in resolving this issue. I tried all possible help from this forum like flashing stock ROM JB n KK but no luck.
Click to expand...
Click to collapse
Format and flash this rom by sp flash tools. http://storage.googleapis.com/otas/2014/Smartphones/Aquaris_5.7/2.0.0-20140912-0911-5.7-bq-FW.rar
drsarkar said:
Format and flash this rom by sp flash tools. http://storage.googleapis.com/otas/2014/Smartphones/Aquaris_5.7/2.0.0-20140912-0911-5.7-bq-FW.rar
Click to expand...
Click to collapse
Thanks for quick reply. I tried this but still no network.
shinde_bharat said:
I'm facing strange problem with my Q3000 after flashing custom ROM.
I will explain once again if looking at my problem can anyone provide me solution.
1) I tried to flash custom rom and while flash something happened n my phone goes off.
2) I format EMMC using SP_Flash_Tool_v5.1420.03 and then flash stock ROM KK.
3) After flashing Phone boot but with no IMEI no and no network.
4) I then used MTK Droid Root & Tools V2.5.3 and replace with correct IMEI no. and confirmed using softwares as well as *#06#
5) but still no network.
6) I do Memory Test using SP_Flash_Tool_v5.1420.03 and found ERROR: NAND Flash was not detected!
Please help in resolving this issue. I tried all possible help from this forum like flashing stock ROM JB n KK but no luck.
Click to expand...
Click to collapse
make sure all drivers must install & backup ur imei before doing anything
1. press power & vol down button (if phone doesn't detect)
format whole flash using sptool ...in format tab
then flash stock rom
if no imei error occur restore ur imei from backup
2. if no sim /no network error occur in custom rom
flash only sec_ro file using sptools
then network comes & then restore imei from backup
xolo q3000 full stock rom
http://forum.xda-developers.com/q3000/orig-development/xolo-q3000-kitkat-4-4-2-007-rom-t3080902
shinde_bharat said:
Thanks for quick reply. I tried this but still no network.
Click to expand...
Click to collapse
Imei?
Sujay95 said:
Imei?
Click to expand...
Click to collapse
yes i reentered the IMEI using engineering mode but still no luck.
Have you recovered???
This is one of the latest rom for lenovo a6000 device .
Everthing works fine....
WARNING.
Install this rom by ur own risk...
Installing this rom may void ur warranty and also may brick ur phone.
INSTALLING PROCCESS.
1.DOWNLOAD THE ROM FILE FROM THE DESCRIPTION BELOW.
2. PUT IT IN YOUR SD CARD.
3. INSTALL A CUSTOM RECOVERY... (TWRP IS THE BEST.)
4. NOW GO TO THE CUSTOM RECOVERY. BY SWITCHING OFF THE DEVICE AND THEN PRESS VOL. UP AND DOWN WITH POWER BUTTON SIMULTANEOUSLY.....
5.NOW IN RECOVERY..
WIPE TO FACTORY RESET .
AND THEN IN ADVANCED WIPE. CLEAR DALVIK CACHE, CACHE, DATA, AND SYSTEM
6. Now go to install and then choosethe rom file in sdcard.
7.flash it and reboot the device.
8. Enjoyyy..
http://www.mediafire.com/file/nt9i1yhfka692r3/ROM_ColorOS_30_Lollipop64-bit_LenovoA6000.zip
OR
https://drive.google.com/file/d/0Bz2jcgnEE4MXeXowYVJmRW9qS28/view?usp=drivesdk
This is the downloading url...
Credit to cararoot.com
For this rom
Lollipop 5.1.1 rom version.
With 64 bit architecture.
No major bugs..
Only one that if u ends an incoming call then u have to restart ur device to get ur speaker volume.
“”DO NOT APPLY OTA UPDATE EVEN WHEN THE DEVICE SHOWS THAT AN UPDATE IS AVAILABE“”
BECAUSE THAT DOESNT INSTALL AND IN ADDITION MAKE PROBLEM WITH UR DATA CONNECTIVITY.
rajgabbar said:
This is one of the latest rom for lenovo a6000 device .
Everthing works fine....
WARNING.
Install this rom by ur own risk...
Installing this rom may void ur warranty and also may brick ur phone.
INSTALLING PROCCESS.
1.DOWNLOAD THE ROM FILE FROM THE DESCRIPTION BELOW.
2. PUT IT IN YOUR SD CARD.
3. INSTALL A CUSTOM RECOVERY... (TWRP IS THE BEST.)
4. NOW GO TO THE CUSTOM RECOVERY. BY SWITCHING OFF THE DEVICE AND THEN PRESS VOL. UP AND DOWN WITH POWER BUTTON SIMULTANEOUSLY.....
5.NOW IN RECOVERY..
WIPE TO FACTORY RESET .
AND THEN IN ADVANCED WIPE. CLEAR DALVIK CACHE, CACHE, DATA, AND SYSTEM
6. Now go to install and then choosethe rom file in sdcard.
7.flash it and reboot the device.
8. Enjoyyy..
http://www.mediafire.com/file/nt9i1yhfka692r3/ROM_ColorOS_30_Lollipop64-bit_LenovoA6000.zip
This is the downloading url...
Click to expand...
Click to collapse
What about credits
ScreenShots?????
see you dude.
Lolipop ? Marshmallow ?N ?
32 bit
64 bit ..
? This rom frome cararoot.com
Otherwise sahre to fb group. Direct link !
Update the post with Description about kernel source , credits to devs , ROM features , Is it 32 bit ?, Lollipop/MM ?,
Update your thread.
Download link itself lollipop, 64 bit doodsss... But credit for devs, source must be mentioned
Screenshot
Hey, did you get the link from here!? http://www.cararoot.com/2016/07/port-rom-coloros-3-0-android-5-1-1-64-bit-lenovo-a6000a6000.html
It's ported by admin of cararoot.com.
GuestStar said:
Hey, did you get the link from here!? http://www.cararoot.com/2016/07/port-rom-coloros-3-0-android-5-1-1-64-bit-lenovo-a6000a6000.html
It's ported by admin of cararoot.com.
Click to expand...
Click to collapse
Yup....
doswar said:
Screenshot
Click to expand...
Click to collapse
Posted..
bro if u don't know that is rom has a bug...if call received after end of call sound don't work...phone has to be restarted to solve it
soan0 said:
bro if u don't know that is rom has a bug...if call received after end of call sound don't work...phone has to be restarted to solve it
Click to expand...
Click to collapse
Yes.. also not charge sonetime
Fast drain
U try that raj....
soan0 said:
bro if u don't know that is rom has a bug...if call received after end of call sound don't work...phone has to be restarted to solve it
Click to expand...
Click to collapse
Yes this is a bug but i dont find any solution to solve this.... If i then i mention that too....
meet8823 said:
Yes.. also not charge sonetime
Fast drain
U try that raj....
Click to expand...
Click to collapse
In my mobile battery backup is superb and lasts for ab 14 to 16 hours even after cellular data is on.
rajgabbar said:
In my mobile battery backup is superb and lasts for ab 14 to 16 hours even after cellular data is on.
Click to expand...
Click to collapse
Good
Plz mirror link to Google drive. Always failed to download...
Akshay6767 said:
Plz mirror link to Google drive. Always failed to download...
Click to expand...
Click to collapse
Okk but after some time...
Akshay6767 said:
Plz mirror link to Google drive. Always failed to download...
Click to expand...
Click to collapse
https://drive.google.com/file/d/0Bz2jcgnEE4MXeXowYVJmRW9qS28/view?usp=drivesdk
This is google drive link
soan0 said:
bro if u don't know that is rom has a bug...if call received after end of call sound don't work...phone has to be restarted to solve it
Click to expand...
Click to collapse
What is solvation
Charge slow
Otherwise work fine ...
TWRP has come to the SM-C7000!
In order to install this, follow these instructions:
Enable OEM Unlock in developer settings
Enter download mode (Press and hold home + volDown + Power when powered off)
Using Odin, click the 'AP' tab and select the recovery.tar file you've downloaded.
Flash the TWRP image, then hold home + volUp + Power
Congratulations, you are now booted into TWRP!
Remember, on the stock ROM, dm-verity is enabled. What does this mean? If you swipe to allow system modifications, you must flash something that disables dm-verity (such as magisk or a dm-verity disabler.)
Also, on the stock ROM, you MUST format /data before performing any actions, due to the fact that it is force-encrypted by default.
BUGS:
None, as far as I'm aware of.
https://drive.google.com/file/d/1fQRIR_fa7MaHTIT-4ta13477mo-Ir-Ey/view
XDA:DevDB Information
TWRP for c7ltechn, Tool/Utility for the Samsung Galaxy C7
Contributors
wzedlare and minz1
Source Code: https://github.com/TeamWin
Version Information
Status: Stable
Created 2017-10-07
Last Updated 2018-01-04
Thank you very much @wzedlare..
TWRP Recovery for Samsung Galaxy C7 (SM-C7000) was being waited by lots of C7 owners. We hope you fix all the issues and make it a flawless file. You can also collaborate with @javad0644 to make it even better.. He had developed a root file for C7 before..
Keep up this good work..
(Note: Except the first two pictures in the OP you have uploaded, the other pictures are broken. We can't see them. Can you please upload them again?)
lawyer_06 said:
Thank you very much @wzedlare..
TWRP Recovery for Samsung Galaxy C7 (SM-C7000) was being waiting by lots of C7 owners. We hope you fix all the issues and make it a flawless file. You can also collaborate with @javad0644 to make it even better.. He had developed a root file for C7 before..
Keep up this good work..
(Note: Except the first two pictures in the OP you have uploaded, the other pictures are broken. We can't see them. Can you please upload them again?)
Click to expand...
Click to collapse
Thanks.I have already been in contact with javad.There are only 2 pictures, there are no other pictures in the thread.
Build 14.10.2017:
Code:
* MTP issue is fixed.You can use MTP now.
Hello excelent work
thanks for work, Thank you very much, excellent work thanks to people like you, we can enjoy new things in our device, thank you very much, a hug and if I can in any way contribute to the creation of a personalized Rom, or send some money to q you think it would be exceptional of you
thank you very much bro , hope you create some bigger works like custom roms. ?
---------- Post added at 06:09 PM ---------- Previous post was at 05:29 PM ----------
hey guys help me i cant take a backup
it cant read the memory at all
Rkd2000 said:
thank you very much bro , hope you create some bigger works like custom roms.
---------- Post added at 06:09 PM ---------- Previous post was at 05:29 PM ----------
hey guys help me i cant take a backup
it cant read the memory at all
Click to expand...
Click to collapse
Because your data is encrypted.Please read the whole thread.
wzedlare said:
Because your data is encrypted.Please read the whole thread.
Click to expand...
Click to collapse
Can you explain for me how can i solve it please
Rkd2000 said:
Can you explain for me how can i solve it please
Click to expand...
Click to collapse
its can not be fix for now...
Costom rom
Thanks for this hard work
I haven't used this method yet
I'm really waiting for a stable costom rom based on lineage os ??
installed on my c7
i have installed on my c7000 hongkong firmware model. flashed with twrp with auto reboot off. restarted into twrp ,swipe to allow modification but it failed to mount storage. then i did factory reset in twrp and type yes. it removed all the data after that it asked me to install twrp and reboot. (it gives you options in twrp upon factory reset) did that and rebooted again in twrp . this time every thing is working good. mounted storage . after that put the supersu zip file on mobile via usb cable and installed through twrp install option then i installed (no-verity-opt-encrypt-3.1.zip) i dont know is it necessary or not but i installed it . rebooted now my mobile is rooted and twrp recovery is working fine.
only problem i got is that private mode is not working now. xD
thanks for making twrp to work :good:
koolguy0000 said:
i have installed on my c7000 hongkong firmware model. flashed with twrp with auto reboot off. restarted into twrp ,swipe to allow modification but it failed to mount storage. then i did factory reset in twrp and type yes. it removed all the data after that it asked me to install twrp and reboot. (it gives you options in twrp upon factory reset) did that and rebooted again in twrp . this time every thing is working good. mounted storage . after that put the supersu zip file on mobile via usb cable and installed through twrp install option then i installed (no-verity-opt-encrypt-3.1.zip) i dont know is it necessary or not but i installed it . rebooted now my mobile is rooted and twrp recovery is working fine.
only problem i got is that private mode is not working now. xD
thanks for making twrp to work :good:
Click to expand...
Click to collapse
So you can use your data even if you reboot to system? I tried verity zip but it didnt work for me(stock rom still encrypted my data).It is just weird, maybe supersu zip made it possible.
wzedlare said:
So you can use your data even if you reboot to system? I tried verity zip but it didnt work for me(stock rom still encrypted my data).It is just weird, maybe supersu zip made it possible.
Click to expand...
Click to collapse
i did the whole method in twrp . after wiping my data mounting storage started working. if you connect mobile to computer via usb (when you are in twrp recovery) the computer will show you your mobile drive so u can put zip files.
i can send you the files if u want them.
koolguy0000 said:
i did the whole method in twrp . after wiping my data mounting storage started working. if you connect mobile to computer via usb (when you are in twrp recovery) the computer will show you your mobile drive so u can put zip files.
i can send you the files if u want them.
Click to expand...
Click to collapse
I know about mtp(I tried it as I'm the dev.I just couldnt disable verity, please send your supersu and verity zips from pm and I will also try them in my spare time, thanks.
Any solution bro? i hope in you to fix it
Request For Galaxy C7 Pro TWRP Recovery
Dear Sir Kindly Upload TWRP Recovery For Samsung Galaxy C7 (SM-C7010).
Twrp for android 7 with default Hong Kong Rom
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Parsa1996 said:
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Click to expand...
Click to collapse
Hi no DO NOT use this TWRP on china rom
Google play
Parsa1996 said:
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Click to expand...
Click to collapse
hello if you are still trying to find a way to ut the play store in the china rom of android 7...here is a apk for installing google play http://itechify.com/2016/11/10/download-google-installer-apk-chinese-phones/
JohnnyMwanza said:
hello if you are still trying to find a way to ut the play store in the china rom of android 7...here is a apk for installing google play http://itechify.com/2016/11/10/download-google-installer-apk-chinese-phones/
Click to expand...
Click to collapse
Hi DO NOT use THIS app DIDNT WORKS