Hey guys .... Good Morning
I have a question for you or i want to have ur Advise on " DOWNGRADING FROM MM (JAN SECURITY UPDATES)>LOLLIPOP
Is it Possible to DO ? I have Moto G3 XT 1550 2gb/16gb... I'm Asking This question CZ i think battery backup and overall performance of Moto G3 with Lollipop was brilliant . But i have read so many thread of many user saying that they had bricked their device while downgrading from MM to Lollipop . So I'm Stopping myself to do so at this moment friends is it possible to do and what I need to do to make it happen waiting for Reply frnzz
Thnx in advance :fingers-crossed::fingers-crossed::fingers-crossed:
I have done it.
Offcourse you can downgrade from Marshmallow to Lollipop. I did that 2 to 3 times, haven' faced any issues. What I want to let you know is be careful with each and every step when proceeding further.
I think you aren't rooted, so no TWRP. I have the same device, what I usually do is get the TWRP backup to an external sd card before messing up, so in case anything goes wrong you can directly roll back to the point where you started.
2 things I want you to know before starting :
1. If you are too much concerned that your device may get bricked, I think you must unlock the bootloader, root the device, flash TWRP and get a full backup and then proceed further with downgrading.
2. Usually if you are careful, you can directly downgrade without doing step 1.
Starting off
1. Download the stock firmware from this Link
2. After downloading follow this Link for flashing the Lollipop Rom.
I hope this helps.
rizwan.mahai said:
Offcourse you can downgrade from Marshmallow to Lollipop. I did that 2 to 3 times, haven' faced any issues. What I want to let you know is be careful with each and every step when proceeding further.
I think you aren't rooted, so no TWRP. I have the same device, what I usually do is get the TWRP backup to an external sd card before messing up, so in case anything goes wrong you can directly roll back to the point where you started.
2 things I want you to know before starting :
1. If you are too much concerned that your device may get bricked, I think you must unlock the bootloader, root the device, flash TWRP and get a full backup and then proceed further with downgrading.
2. Usually if you are careful, you can directly downgrade without doing step 1.
Starting off
1. Download the stock firmware from this Link
2. After downloading follow this Link for flashing the Lollipop Rom.
I hope this helps.
Click to expand...
Click to collapse
U have done it before the security patches or after the security patches cz security patches upgraded the Bootloader and In order to downgrade i think i need to skip motoboot and gpt files am i right bro or correct me if im wrong
I never updated anything on lollipop, though it was rooted and had TWRP installed. I don't remember everything but I received the security patch updates, i tried installing but each time when the device rebooted the installation failed. (I think because of unlocked bootloader)
When Jio came up, I was having VOLTE issues on Lollipop so I wanted to update to Marshmallow but I couldn't do it over OTA update. I backed up the lollipop rom via TWRP and then manually flashed the marshmallow rom myself. Everything was good but I didn't like the vertical app drawer, so again I backed up marshmallow rom and then rolled back to lollipop rom with minutes. After some days I had to restore to marshmallow again. And after months, today I am on AOSP Extended rom based on Nougat. Excellent Rom.
So regarding you questions, I suggest you to go through the comments section of How to flash factory images page.
I already told you, if you are concerned then unlock the bootloader, root, TWRP. :good:
Downgrading from mm to lollipop
abhi8939 said:
U have done it before the security patches or after the security patches cz security patches upgraded the Bootloader and In order to downgrade i think i need to skip motoboot and gpt files am i right bro or correct me if im wrong
Click to expand...
Click to collapse
Sir the boot file is before the motoboot.IMG (bootloader) and gpt file
Is the boot file required to be removed as with the bootloader and gpt file.please correct me.
My name is Anshuman and I am from Rohtak ,Haryana
I have a moto g3 osprey xt1550 Indian model with viper os on it (viper os is a great ROM).Please reply as soon as possible.
Finally I tells you that you are 85% right. I tried by removing the gpt and bootloader file.
Do want to restore it to back stock 6.0.1
downgrade to 5.1.1
I downgraded to 5.1.1 using 6.1 stock reckovery for reset before flashing.
Flashed factory image without flashing gpt.bin and bootloader.img
After reboot i got a notification to completely deinstall motorola sensor-firmware in order to went back to a previous version.
Not knowing if this will brick my device, i only disabled the notification by longpressing it/ question mark/.. a screen opened where i could block this notification.
Till now i could not see battery life improvement compared to MM or N Roms
dau999 said:
I downgraded to 5.1.1 using 6.1 stock reckovery for reset before flashing.
Flashed factory image without flashing gpt.bin and bootloader.img
After reboot i got a notification to completely deinstall motorola sensor-firmware in order to went back to a previous version.
Not knowing if this will brick my device, i only disabled the notification by longpressing it/ question mark/.. a screen opened where i could block this notification.
Till now i could not see battery life improvement compared to MM or N Roms
Click to expand...
Click to collapse
Yes you can downgrade by using stock recovery with having Motorola update notification but you can not do it with twrp recovery as it may be dangerous for your phone.I had done it successfully with stock recovery of 5.1
Downgrading moto g3 osprey from marshmallow to lollipop
Do want to restore it to back stock 6.0.1
Eager tO Help and SHARE The InfomAtION whICH will B HelPFuL For ALL UseR.... If My InfOrMation HelpeD YOU dO giVES It a ThumbS uP....
Like My woRk Don't ForGeT tO hiT the THANKS bUttON
My Device :
Moto G 3 [ XT-1550]
Rom : PureNexus Osprey Build [7/21/2017] unofficial
No sir I don't want to update to mm 6.0.1.
I want to flash 5.1 fully with bootloader.So please tell how can I do?
No sir I don't want to update to mm 6.0.1.
I want to flash 5.1 fully with bootloader.So please tell how can I do?
bro i would request u to wait ... cz i am looking some answer from Developers in xda :fingers-crossed:
Downgrading from mm to lollipop.
abhi8939 said:
No sir I don't want to update to mm 6.0.1.
I want to flash 5.1 fully with bootloader.So please tell how can I do?
bro i would request u to wait ... cz i am looking some answer from Developers in xda :fingers-crossed:
Click to expand...
Click to collapse
OK sir thanks for your post.Please don't forgot it.
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Sir what the fastboot erase clogo command does?I forgot about it Please tell
abhi8939 said:
No sir I don't want to update to mm 6.0.1.
I want to flash 5.1 fully with bootloader.So please tell how can I do?
bro i would request u to wait ... cz i am looking some answer from Developers in xda :fingers-crossed:
Click to expand...
Click to collapse
Sir am having my firmware but I updated my phone to 6.0.1 for security updates.
I had problem in flashing moto bootloader of previous version with gpt.bin of 5.1
Advantager said:
Sir am having my firmware but I updated my phone to 6.0.1 for security updates.
I had problem in flashing moto bootloader of previous version with gpt.bin of 5.1
Click to expand...
Click to collapse
Yes u will FCE that problem cz ur bootloader got updated that's y ..
abhi8939 said:
Yes u will FCE that problem cz ur bootloader got updated that's y ..
Click to expand...
Click to collapse
Let me take the risk .... If success or not will report apsa
Sir am having my firmware but I updated my phone to 6.0.1 for security updates.Motorola had given my 5.1 firmware but it does not locks my bootloader.There is no stock 6.0.1 firmware which I want.It is also not on XDA threads. Please search the firmware for me. My phone's specifications are:-
Moto g3 Indian osprey xt1550 Baseband Version M8916_2020617.29.03.21.45R .Please sent the link as fast as possible I am waiting.
Thanks sir.
---------- Post added at 11:19 AM ---------- Previous post was at 11:16 AM ----------
abhi8939 said:
No sir I don't want to update to mm 6.0.1.
I want to flash 5.1 fully with bootloader.So please tell how can I do?
bro i would request u to wait ... cz i am looking some answer from Developers in xda :fingers-crossed:
Click to expand...
Click to collapse
abhi8939 said:
Let me take the risk .... If success or not will report apsa
Click to expand...
Click to collapse
Motorola had given my 5.1 firmware but it does not locks my bootloader.There is no stock 6.0.1 firmware which I want.It is also not on XDA threads. Please search the firmware for me. My phone's specifications are:-
Moto g3 Indian osprey xt1550 Baseband Version M8916_2020617.29.03.21.45R .Please sent the link as fast as possible I am waiting.
Thanks sir.
Advantager said:
Sir am having my firmware but I updated my phone to 6.0.1 for security updates.Motorola had given my 5.1 firmware but it does not locks my bootloader.There is no stock 6.0.1 firmware which I want.It is also not on XDA threads. Please search the firmware for me. My phone's specifications are:-
Moto g3 Indian osprey xt1550 Baseband Version M8916_2020617.29.03.21.45R .Please sent the link as fast as possible I am waiting.
Thanks sir.
---------- Post added at 11:19 AM ---------- Previous post was at 11:16 AM ----------
Motorola had given my 5.1 firmware but it does not locks my bootloader.There is no stock 6.0.1 firmware which I want.It is also not on XDA threads. Please search the firmware for me. My phone's specifications are:-
Moto g3 Indian osprey xt1550 Baseband Version M8916_2020617.29.03.21.45R .Please sent the link as fast as possible I am waiting.
Thanks sir.
Click to expand...
Click to collapse
Sorry bro Motorola hasn't released the firmware and also it is not available on XDA also there are chance that we will receive them late but I'm not sure about that and bro first thing to relock the bootloader u need to have the same firmware on which u unlocked the Bootloader. So to relock the bootloader again u need the firmware latest with oct/jan/april security patches .
Related
hello , everyone!
Im in stock and i just updated to 4.4.4 OTA.
i wanted to know which is better. 1. Root and install Xposed 2.Install CWM [cyanogenmod 11]
and please send me the proper link o guidance to root .
XT1033
4.4.4
INDIAN DUAL SIM
i prefer best battery and zero boatwares
The procedure works for 4.4.4 too...just flash the latest recovery and SuperSU
http://forum.xda-developers.com/showthread.php?t=2684234
Sent from my Moto G using XDA Premium 4 mobile app
thank you, would u prefer rooted over Custom firmware ?
I prefer custom firmwares.... They just have more functionality integrated and I prefer that....Though rooted with xposed and a bunch of cool modules is pretty good too
Sent from my Moto G using XDA Premium 4 mobile app
thank you bro, is cyanogenmod stable ?
insomniahd said:
thank you bro, is cyanogenmod stable ?
Click to expand...
Click to collapse
Yes
pfufle said:
The procedure works for 4.4.4 too...just flash the latest recovery and SuperSU
http://forum.xda-developers.com/showthread.php?t=2684234
Click to expand...
Click to collapse
thank you , this method has successfully rooted moto g 4.4.4
i hav confusion
does rooting looses devices warrenty?
i mean rooting involves boot unlocking and flashing supersu
is i going to void my warrenty
phreeoni said:
does rooting looses devices warrenty?
i mean rooting involves boot unlocking and flashing supersu
is i going to void my warrenty
Click to expand...
Click to collapse
yes it will lose warranty but there's always the possibility of the service center not knowing you've rooted and unlocked bootloader if you flash back stock rom.
OldYellowBricks said:
yes it will lose warranty but there's always the possibility of the service center not knowing you've rooted and unlocked bootloader if you flash back stock rom.
Click to expand...
Click to collapse
Ok.. But a friend of mine said that i wont be able ti recieve official updates if i unlock the boot loader and root the device. Its important for me to root but i cant loose the up coming updates as wel.. Any suggestion.. Will be able to get these official updates from google ?
phreeoni said:
Ok.. But a friend of mine said that i wont be able ti recieve official updates if i unlock the boot loader and root the device. Its important for me to root but i cant loose the up coming updates as wel.. Any suggestion.. Will be able to get these official updates from google ?
Click to expand...
Click to collapse
No way bro if u have unlocked ur bootloader u will recive ota update. After rooting ur phone it will modify system so we can't receive ota update . we have to flash stock ROM again to get ota update or wait some developers will make flashable ota update that we can flash
Rooted Moto G Successfully
Hi,
This is excellent.
I was facing problem with me Moto G KK 4.4.4 that loosing signal in both SIM card some times and delay in getting Signal. After reading this nice guide I have rooted Moto G, to see whether the problem solved or not. Currently its working fine.
I have installed greenify- Battery backup increased automatically
Will try Gravity Box
Now my question is- Will my device upgrade to Lolipop when Motorola will release it for Indian dual version phone?
Suggest few more application which will keep phone healthy...
I need the following with full version
1. Poweramp player (patch not working)
2. call recorder (record should be from both side)
Hi people i have some questions about Rooting and unlocking the bootloader of the moto g (1st Gen) is my first phone that's need to unlocking to root and flash rom's,let's go:
1. if I unlock the bootloader everything on my phone will be wiped?
2..if I do root and unlock the bootloader in my current KitKat i will be able to upgrade to the lollipop?
3.Lollipop already have root? it supports the MultiROM?
4.if I root now be able to upgrade to the lollipop and then root again? but if there is an update after 5.0 will be able to use it (ex:5.1 minor fixes) with root?
Sorry for many questions
Thanks advanced.
BryanByteZ said:
Hi people i have some questions about Rooting and unlocking the bootloader of the moto g (1st Gen) is my first phone that's need to unlocking to root and flash rom's,let's go:
1. if I unlock the bootloader everything on my phone will be wiped?
2..if I do root and unlock the bootloader in my current KitKat i will be able to upgrade to the lollipop?
3.Lollipop already have root? it supports the MultiROM?
4.if I root now be able to upgrade to the lollipop and then root again? but if there is an update after 5.0 will be able to use it (ex:5.1 minor fixes) with root?
Sorry for many questions
Thanks advanced.
Click to expand...
Click to collapse
1. Unlocking the boot loader will wipe everything...yes... You need to take backup of everything before unlocking..
2. You need to flash custom recovery to root your phone... My sugesstion is don't flash anything as of now or root.
If you root your phone, you will get ota,but you can't install it... So once you installed lollipop,you root it..
3. Lollipop will support multirom..wait for some dev to develop it..
4. Rooting is easy.. There are plenty of guides there for rooting.. Wait for few days to get lollipop and root it..
---------- Post added at 07:23 AM ---------- Previous post was at 07:22 AM ----------
5... You can't install any official update if you root it.. But you can flash the update if any one created a flashable zip
padhu1989 said:
1. Unlocking the boot loader will wipe everything...yes... You need to take backup of everything before unlocking..
2. You need to flash custom recovery to root your phone... My sugesstion is don't flash anything as of now or root.
If you root your phone, you will get ota,but you can't install it... So once you installed lollipop,you root it..
3. Lollipop will support multirom..wait for some dev to develop it..
4. Rooting is easy.. There are plenty of guides there for rooting.. Wait for few days to get lollipop and root it..
---------- Post added at 07:23 AM ---------- Previous post was at 07:22 AM ----------
5... You can't install any official update if you root it.. But you can flash the update if any one created a flashable zip
Click to expand...
Click to collapse
thanks for answering the other questions .
then I have to wait for the kernel to become compatible with the bootloader and the system itself correct?
BryanByteZ said:
thanks for answering the other questions .
then I have to wait for the kernel to become compatible with the bootloader and the system itself correct?
Click to expand...
Click to collapse
Wait for lollipop official update.. once installed.. you can play with your mobile.. Devs are also waiting for lollipo firmware images and they will develop the custom kernels so you can use it...
padhu1989 said:
Wait for lollipop official update.. once installed.. you can play with your mobile.. Devs are also waiting for lollipo firmware images and they will develop the custom kernels so you can use it...
Click to expand...
Click to collapse
Thanks for replying a new noob in this world,any ETA for the Lollipop(image and ota) ? already have in Brazil in some phones but in mine .... i still awaiting....
Thanks advanced.
BryanByteZ said:
Thanks for replying a new noob in this world,any ETA for the Lollipop(image and ota) ? already have in Brazil in some phones but in mine .... i still awaiting....
Thanks advanced.
Click to expand...
Click to collapse
Everyon is waiting. Hope to get the ota within this month end
padhu1989 said:
Everyon is waiting. Hope to get the ota within this month end
Click to expand...
Click to collapse
Thanks man for all.
Sent from my XT1033 using XDA Free mobile app
Hello guys,
I upgraded my Moto G a couple of days ago to Lollipop 5.0 and yesterday I decided to downgrade my phone back to 4.4.4.
But when I updated OTA 4.4.4 my phone won't boot up.
I've flashed MBM-CI 4.3 4.4.2 and 4.4.4 with Motoflasher, but it still won't boot up.
Please, how to make MBM-CI file? I still have my OTA 5.0.
Thanks.
damnedivan said:
Hello guys,
I upgraded my Moto G a couple of days ago to Lollipop 5.0 and yesterday I decided to downgrade my phone back to 4.4.4.
But when I updated OTA 4.4.4 my phone won't boot up.
I've flashed MBM-CI 4.3 4.4.2 and 4.4.4 with Motoflasher, but it still won't boot up.
Please, how to make MBM-CI file? I still have my OTA 5.0.
Thanks.
Click to expand...
Click to collapse
AFAIK, you have to wait for the official OTA to be release by Motorola
Have you tried this guide ?
I'm on BR Retail, so I get the OTA early. If that thread you refered to me talks about is the source for Android 5.0 for Moto G, i have no choice then, i have toi wait for it.
I'm with the same problem...
I'm on BR soak test
MBM CI-5.0
Would anybody like to create mbm-ci 5.0 files????Please share this to other threads!
http://forum.xda-developers.com/android/software/xt1033-bootloader-files-mbm-ci-5-0-t3011387
The Retail Asia 5.0.2 OTA Update includes a bunch of mbn files.
lost101 said:
The Retail Asia 5.0.2 OTA Update includes a bunch of mbn files.
Click to expand...
Click to collapse
However we need the programmer.mbn and the singleimage.bin. Where we can find it when they are avaible?
the link of stock image in "Android development" is break.
Good news
New firmwares avaible on this link
Marcusz97 said:
New firmwares avaible on this link
Click to expand...
Click to collapse
i found these if they help
https://mega.co.nz/#!OFYB1YLJ!N2SvCV9ktPnPRcKY7CWwk1_v1KW20zCLao56-g7t-Y0
they're supposed to be "This is motoboot.img from BRASIL XT1032 lollipop firmware"
and this
XT1032_502_motoboot.zip (http://forum.xda-developers.com/attachment.php?attachmentid=3141854&d=1422650608)
Well Same here
I tried to root the phone in android 5.0 but failed and soft bricked so i installed stock android firmware version 4.4.2 today i tried to update it through OTA to 4.4.4. After the update the phone is hard bricked. I want to get it back to fastboot atleast :crying: . If u guys got the fix pls post it here.
Thanks in advance
How is it Then?
We got the new firmware, we got the motoboot.img, then what? How to turn on our phones back? Anyone?
anyone know when it leaves the file mbm ci 5.0 motorola moto g ?
PrasTheIcon said:
I tried to root the phone in android 5.0 but failed and soft bricked so i installed stock android firmware version 4.4.2 today i tried to update it through OTA to 4.4.4. After the update the phone is hard bricked. I want to get it back to fastboot atleast :crying: . If u guys got the fix pls post it here.
Thanks in advance
Click to expand...
Click to collapse
the following is that my phone is totally shut off and only turns on the LED when connected in any way to either the PC or the power which I imagine was x that made him a lollipop dowground to KitKat and catualizar trailed off . Someone knows if the file already came to revive ???
or if someone could fix it and please help me.
thanks
Please provice MBM-CI files for moto g 5.0.2
Please provice MBM-CI files for moto g 5.0.2 i also bricked my phone today while doing a downgrade.
er.mansury said:
Please provice MBM-CI files for moto g 5.0.2 i also bricked my phone today while doing a downgrade.
Click to expand...
Click to collapse
yesterday i bricked my xt1033 too. stock 5.1 (asia) > GPE 4.4.4 > GPE 5.0.1 update and it was bricked :crying:
slimshady34 said:
yesterday i bricked my xt1033 too. stock 5.1 (asia) > GPE 4.4.4 > GPE 5.0.1 update and it was bricked :crying:
Click to expand...
Click to collapse
same to me today.
F...ck
ur problem now solved ? if solved plzz share with me also
xDhii said:
I'm with the same problem...
I'm on BR soak test
Click to expand...
Click to collapse
plzzz share ur experience how to fix this problem.....:crying:
---------- Post added at 01:48 PM ---------- Previous post was at 01:44 PM ----------
PrasTheIcon said:
I tried to root the phone in android 5.0 but failed and soft bricked so i installed stock android firmware version 4.4.2 today i tried to update it through OTA to 4.4.4. After the update the phone is hard bricked. I want to get it back to fastboot atleast :crying: . If u guys got the fix pls post it here.
Thanks in advance
Click to expand...
Click to collapse
if u got any idea plzz share with me too:good:
---------- Post added at 01:54 PM ---------- Previous post was at 01:48 PM ----------
wendiko said:
same to me today.
F...ck
Click to expand...
Click to collapse
plzzz help me
I think now manages the mbm-5.0?
slimshady34 said:
yesterday i bricked my xt1033 too. stock 5.1 (asia) > GPE 4.4.4 > GPE 5.0.1 update and it was bricked :crying:
Click to expand...
Click to collapse
+1
MBM-CI 5.0
Anderson Marassi said:
+1
Click to expand...
Click to collapse
+1
sahir1993 said:
+1
Click to expand...
Click to collapse
+1
i am making a new rom from 6.0.1 i am trying with g5 modded apps
XDA:DevDB Information
g5 rom for lg gflex 2, ROM for the LG G Flex 2
Contributors
nikolas60, Nikolas60
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Testing
Created 2016-07-25
Last Updated 2016-07-25
i need help can i make it on kdz file so anyone can flash it i found a way to recompile it to kdz and evrything but will it break my bootloader it will be base on mm
nikolas60 said:
ROM OS Version: 2.3.x Gingerbread
Click to expand...
Click to collapse
WTF?!
KoumiCZ said:
WTF?!
Click to expand...
Click to collapse
sorry fixed
I am not addict to custom roms but if you need anything from an owner of a rooted H955 v15c just mention it.
By the way, are you planning custom rom for all models?
yea good luck with locked bootloader.
If you need anything with a rooted 15e (latest lollipop version) image, I can help. Also, how are you going to flash a ROM with the bootloader locked in marshmallow, since bootloader locked in mm = no root and no flashing ROMs? But still very good initiative, I'll look forward to see your progress on the ROM. Nice idea C:
We will give you all our support~
i will try to root mm first
Do it, do it now
i bricked send it to lg and i hope it will get fixed by warranty as far of lock boot loader the phone failed while flashing rom and the partitions where changed so when i was flashing stock Rom was stuck at 9 percent on lg up and i read on forums a lot have the same problem maybe i will not root again lg g flex 2 stock marshmallow to be safe in my other phones the rooting process was easy now i dot want to brick it again sorry guys il try to make mods from v10 for 5.1.1 nothing more for you guys me i will not use it im guess root break this phone partitions so sorry
nikolas60 said:
i bricked send it to lg and i hope it will get fixed by warranty as far of lock boot loader the phone failed while flashing rom and the partitions where changed so when i was flashing stock Rom was stuck at 9 percent on lg up and i read on forums a lot have the same problem maybe i will not root again lg g flex 2 stock marshmallow to be safe in my other phones the rooting process was easy now i dot want to brick it again sorry guys il try to make mods from v10 for 5.1.1 nothing more for you guys me i will not use it im guess root break this phone partitions so sorry
Click to expand...
Click to collapse
Well, at least you tried. Thanks for that. If you ever decide to look into unlocking the G Flex2's bootloader, make sure to update us
lets just hope for 7.0. I know LG firmware can get up to v30. so far we have v20 mallows
Iron_Overheat said:
If you need anything with a rooted 15e (latest lollipop version) image, I can help. Also, how are you going to flash a ROM with the bootloader locked in marshmallow, since bootloader locked in mm = no root and no flashing ROMs? But still very good initiative, I'll look forward to see your progress on the ROM. Nice idea C:
Click to expand...
Click to collapse
Please notice that actually we can unlock it very easy as we have have root and flashfire!
raftomas88 said:
Please notice that actually we can unlock it very easy as we have have root and flashfire!
Click to expand...
Click to collapse
... oh really ? and how exactly can we do that? It would be great if you could explain it, because everyone here is actually waiting for that to happen !
Flashfire may work at least backing up all partitions.
I believe it still needs a custom recovery to flash but I haven't gotten my device yet. Will be here in a few days.
Sent from my 0PJA2 using Tapatalk
rootlinux said:
Flashfire may work at least backing up all partitions.
I believe it still needs a custom recovery to flash but I haven't gotten my device yet. Will be here in a few days.
Sent from my 0PJA2 using Tapatalk
Click to expand...
Click to collapse
any progress?
LG FLEX 2
When it will be realise 4 donwload? and twrp too.. thank uu.
dragantnt said:
When it will be realise 4 donwload? and twrp too.. thank uu.
Click to expand...
Click to collapse
Today
This Thread Has Been
Cleared By Me Due To Some Reasons .
Please Go To The New Thread That I Started In The Android Development Section Of AT&T LG G3 .
No More Replies To This Thread .
.
If Any Moderator See This Thread , Please Remove It Completely Because I Don't Know How To Delete A Thread By Myself
I'm confused about your post.. There is NO kdz for the D850.. Also theres already a guide in the general section. The D850 uses tot files and in which there is no MM tot. I think you may be thinking of the D850PR which those files are already in my guide and in which there is risk by downgrading/upgrading a D850 to a D850PR.
So you may want to change the title to D850PR if you keep this thread.
DELETED
Stock Marshmallow Firmware For LG G3 D850
Mansoor4139 said:
And that's why i created a new thread which contains marshmallow firmware and everything related to it
Click to expand...
Click to collapse
Yeah but it's D850PR firmware not D850. Which can cause issues for some people if flashed on a D850.
Is it rootable? I didn't think the D850 had root unless you downgraded to kitkat to root? (Sorry haven't really kept up with root)
Sent from my iPhone using Tapatalk
DELETED
Mansoor4139 said:
I Tested It On My Device But I Am Currently Using CloudyG3 .
There Were No Problems In The Firmware . There Is Only One Minor Problem For Which I Posted The Fix
Click to expand...
Click to collapse
How is it fixable if MM is not rootable? Where you able to successfully flash back to the D850 KitKat firmware? as normally it causes issues with flashtool when changing around models. But you should really mention that its D850PR firmware so those don't get confused as its not an AT&T D850 firmware.
DELETED
Mansoor4139 said:
It Is Stock UnModified Marshmallow Firmware . It Can Be Rooted . There Are Many Methods For It .
.
By The Way , This Error Box Only Once Every Boot And It Has No Effect On The Phone . It disappears and you use the phone as normal ?
Click to expand...
Click to collapse
Yes I know its stock unmodified its a kdz I already had the kdz. But looking around MM 6.0 is not rootable on the D850 thats what I was saying, Only way to root is if you downgrade to KitKat. Unless MM is rootable for the D850PR. But it doesnt seem so. I don't have a D850 anymore to test it.
DELETED
Mansoor4139 said:
.
I Mentioned It In The Thread That It Is D850PR (Edited) .
And There Are Other Threads For Going Back To Kitkat From Marshmallow . So You Can Search It On XDA Because I Cannot Explain Everything In A Single Thread ???
Click to expand...
Click to collapse
I don't think you read my post correctly, Yes I know how to go back to stock, I created the guide for it years ago What I am saying is you cant fix the cust_error without root and MM 6.0 doesn't seem rootable.
DELETED
Mansoor4139 said:
And I Also Said That It Can Be Rooted . There Are Many Methods For It . BTW , It Is Not A Big Problem .
.
Please read my post carefully too ?
Click to expand...
Click to collapse
Hopefully it can be, would be great! Just saying the D850 MM still cannot be rooted to this day. Hopefully there will be some more testers soon. Wish the PR firmware was around back when I had my G3 when it came out
DELETED
Added Instructions To Downgrade From Marshmallow To KitKat
DELETED
DELETED
DELETED
not working
well im trying to do this on my AT&T d850 10d and its not working. everytime it gets stuck at 4%. followed the instructions exactly.
Any help?
ouz_11 said:
well im trying to do this on my AT&T d850 10d and its not working. everytime it gets stuck at 4%. followed the instructions exactly.
Any help?
Click to expand...
Click to collapse
You are using a USB 2.0 port correct? USB 3.0 won't work.
Sent from my iPhone using Tapatalk
help
Mansoor4139 said:
I Re-Flashed This Firmware Again In Order To Find Any Permanent Method For Root . So I Finally Became Successful In Rooting It With A PC Tool That I Mentioned In The Thread . Now This Thread Contains EveryThing And I Won't Do Any Further Re-Testing . I Moved Back To CloudyG3 That I Use As A Daily Driver .
So, You Can Test The Firmware Yourself Now .
Click to expand...
Click to collapse
Mansoor yar do something. im stuck at 4% software upgrade. any help