Kyocera E4710 (DuraXE) Serivce/Engineering mode? - General Questions and Answers

Hi all,
Are there any known codes to put the Kyocera E4710 DuraXE into service/engineering mode? I've tried the standard Android codes; no go. Also tried the 111111/options/menu code, and it doesn't work.
Thanks for any info!

xts204 said:
Hi all,
Are there any known codes to put the Kyocera E4710 DuraXE into service/engineering mode? I've tried the standard Android codes; no go. Also tried the 111111/options/menu code, and it doesn't work.
Thanks for any info!
Click to expand...
Click to collapse
There are apps on the Playstore that'll allow you to enter engineering mode without any codes.

Freewander10 said:
There are apps on the Playstore that'll allow you to enter engineering mode without any codes.
Click to expand...
Click to collapse
Would love to do that, but this POS phone will not run the PlayStore app. Just freezes. Other APKs expect touch-screen functionality to work, and don't allow for manual navigation of the cursor/screen area with the keys. I'm very limited as to what I can do with it.
Tried rooting with KingRoot, but the phone hangs/strange screens post-root. I reverted back to factory for stability reasons.

AT&T Dura XE to T-Mobile (not working)
I also have a Kyocera E4710 (Dura XE unlocked AT&T). With my T-Mobile sim card I only have internet and no voice or text and WIFI hotspot will not work. In the settings menu>system>about phone>status, I always have "unknown" instead of my phone number. I have all APN settings as per T-Mobile instructions, but can never get voice or texts to work. Any one have any suggestions?

xts204 said:
Would love to do that, but this POS phone will not run the PlayStore app. Just freezes. Other APKs expect touch-screen functionality to work, and don't allow for manual navigation of the cursor/screen area with the keys. I'm very limited as to what I can do with it.
Tried rooting with KingRoot, but the phone hangs/strange screens post-root. I reverted back to factory for stability reasons.
Click to expand...
Click to collapse
Does anyone know how to HARD reset this phone or at least get into recovery via key presses?
Got one here with a user lock, can't access any menus only the emergency dialer.
I know it's a pos phone but just for sh*ts and giggles. xD

How do you root this phone?

Any one rooted this device?

Related

Bypass Gmail sign-in, Bypass passwords, Bypass screen lock drawing!!!!!

I read this over at tmonews...
"While playing with my G today, I found a way to enter "safe mode" which will bypass the initial gmail signin and allow you to straight to the good stuff with out activating via google. You can also bypass the security drawing pattern.
1. Power off your device
2. While device is powering back on press and hold the "menu" key, keep holding it past the G1 and android splash screen.
Phone will boot all the way to the main screen and display "safe mode" in lower left corner.
I have confirmed that data is still fully operational and all of my downloaded programs."
Very interesting
bps725 said:
I read this over at tmonews...
"While playing with my G today, I found a way to enter "safe mode" which will bypass the initial gmail signin and allow you to straight to the good stuff with out activating via google. You can also bypass the security drawing pattern.
1. Power off your device
2. While device is powering back on press and hold the "menu" key, keep holding it past the G1 and android splash screen.
Phone will boot all the way to the main screen and display "safe mode" in lower left corner.
I have confirmed that data is still fully operational and all of my downloaded programs."
Very interesting
Click to expand...
Click to collapse
How about a ROM DUMP?
I think there's already a thread or two about that.
im sorry to say this but the safe mode does not allow to bypass the initial activation screen but it sure does bypass the security screen
artyr0x said:
im sorry to say this but the safe mode does not allow to bypass the initial activation screen but it sure does bypass the security screen
Click to expand...
Click to collapse
Correct I already posted about this. You still have to activate service with Tmobile and Google. Safe mode on the phone is just like on a regular computer help you fix issues.
speoples20 said:
Correct I already posted about this. You still have to activate service with Tmobile and Google. Safe mode on the phone is just like on a regular computer help you fix issues.
Click to expand...
Click to collapse
It runs exactly as u would have it if it wasnt in safe mode the only difference is that u can bypass the security screen and attempt to change the security lock i'll play around wit it later on today
Well being the moder I am. I was smart enough to download that converter program floating around before reading about it and I get non stop errors on the home screen.. but for w/e reason running the phone in safe mode does not let the program load so I get no errors now but I can't unintsall it from the applications uninstall from settings.. it gives me an error when iit treys to compute the program sizes so I I can not run the phone when not in safe mode.. would be awesome if someone could help me here
try connecting it to the computer in debug mode and uninstall using adb
i have been google searching for two hours and i have yet to find how to put commands into the g1 i got the drivers and everything and its recoginzed by my comp but i dont know where i type adb shell uninstall or w/e can you direct me in the right direction?
you need to download the SDK from google. You should see some threads with the SDK or the Emulater... it is all the same. adb is in the tools thread. Ohh and you need to enter "adb -d uninstall (name of apk)"
i tried this and no luck the system still crashes... and you know i wouldnt mind loading factory defaults its just i use shazam and i already have over 150 tags that i do not want to lose and thats all i really need to back up... but i can not access the file system on the phone unless i am missing something :/ this is really killing me i hate when i cant fix something
Disabled said:
i tried this and no luck the system still crashes... and you know i wouldnt mind loading factory defaults its just i use shazam and i already have over 150 tags that i do not want to lose and thats all i really need to back up... but i can not access the file system on the phone unless i am missing something :/ this is really killing me i hate when i cant fix something
Click to expand...
Click to collapse
you sure it doesn't save that info on the memory card?
no nothing application saves to the memory card.. well besides amazon for the mp3 market i think. unless those are the tags? i dont know can you confirm? again thanks for the help man
I just tested and you are correct it doesn't save to the SD card... weird why it wouldn't a couple other applications do besides amazon.
I have G1 in my Hand in India but sad thing is its an Unactivated Phone.
I can easily unlock Sim by using Remote Unlock code for my IMEI provided by some Sellers on web. But how can a Activate the phone in India.
I know the t-mobile Activated SIM Trick for phone using some borrowed Sim card but in India its Impossible.
Help, please Help
google g1
ok i really need help i got my phone from the U.S and i live in canada it is unlcoked but it wont work i cant bypass the gmal sign in i tried the steps for the safe mode but the safe mode sign comes up at the bottom but it just stays at the one creen where it says touch to begin your setup for gmail i try to setup but it says my sim is wrong how do i fix this please help
JayMan26403 said:
ok i really need help i got my phone from the U.S and i live in canada it is unlcoked but it wont work i cant bypass the gmal sign in i tried the steps for the safe mode but the safe mode sign comes up at the bottom but it just stays at the one creen where it says touch to begin your setup for gmail i try to setup but it says my sim is wrong how do i fix this please help
Click to expand...
Click to collapse
google is your best friend. try searching for a solution. all you have to do is change the APN settings to rogers/fido and go through the gmail activation.
hetaldp said:
I have G1 in my Hand in India but sad thing is its an Unactivated Phone.
I can easily unlock Sim by using Remote Unlock code for my IMEI provided by some Sellers on web. But how can a Activate the phone in India.
I know the t-mobile Activated SIM Trick for phone using some borrowed Sim card but in India its Impossible.
Help, please Help
Click to expand...
Click to collapse
im in Mumbai using my G1 for the last few weeks. read here
safe mode works on the M580 but FAILS to bypass the lock screen password.
HTC Android Tool
★★★ WORLD FIRST ★★★
Bypass Google Account Just ONE CLICK
http://forum.gsmhosting.com/vbb/f75...bypass-google-account-just-one-click-1556888/​

Safe Mode on G1

From androidcommunity.com, not sure how useful.
found a way to enter "safe mode" which will bypass the initial gmail signin and allow you to straight to the good stuff with out activating via google. You can also bypass the security drawing pattern.
1. Power off your device
2. While device is powering back on press and hold the "menu" key, keep holding it past the G1 and android splash screen.
Phone will boot all the way to the main screen and display "safe mode" in lower left corner.
I have confirmed that data is still fully operational and all of my downloaded programs.
http://androidcommunity.com/forums/f41/g1-safe-mode-2565/
Which firmware are you running? I'm on ota rc30 and I can't repro. I wonder if this was fixed in an update.
I should say, I can get into safe mode, but I can't get past the initial google sign-in screen.
Bypassing Google Activation is not Possible in any Version
Bypassing the Drawing Pattern was Patch in RC30
For for RC30 user they are out of luck.
hetaldp said:
Bypassing Google Activation is not Possible in any Version...
Click to expand...
Click to collapse
Shouldn't it help to start the phone with non T-mobile sim card?
Why u require to bypass Activation Process
You can Unlock the Phone and add your GPRS Setting and Activate the Phone Officially on your Carrier.
Well... Don't you still need valid T-mobile sim-card for the first boot after unlocking?
The real reason is, I tried to use my G1 without G1 data plan (-$25 cheaper . It was Ok, I could use WiFi for internet, but I made a factory reset and was not able to pass that activation after - can not use WiFi for that.
You require Valid TMobile SIM only for Activation becuase GPRS Setting Preset in Phone.
But if you have Any other Non TMobile SIM Card Press Menu Button this will popup APN Setting Just Press it again Press Menu Button this will popup New APN Just Add your Carrier APN, Mobile Country Code and Mobile Network Code And reboot. If you can see G or E or 3G on top Bar your Data is Activated Just follow with your Google A/c and Password and you did it
hetaldp said:
You require Valid TMobile SIM only for Activation becuase GPRS Setting Preset in Phone.
But if you have Any other Non TMobile SIM Card Press Menu Button this will popup APN Setting Just Press it again Press Menu Button this will popup New APN Just Add your Carrier APN, Mobile Country Code and Mobile Network Code And reboot. If you can see G or E or 3G on top Bar your Data is Activated Just follow with your Google A/c and Password and you did it
Click to expand...
Click to collapse
@Hetaldp
Thanks 8! i was going almost crazy to get around this checked almost every forum but no body could give me a suggestion like this! thanks for you now i know how to set up my own account!
WBR
ReyTech.
I was able to get into safe mode via holding down the Menu Key while booting. Open Home was giving me issues and i was unable to get past the "Android" splash screen. Booted to safe mode via the initial instructions and was able to uninstall open home. I'm using JF's 1.5 ADP w/LucidREM App2Sd image. So the "safe mode" works in the newest release. I can't account for getting past the drawing pattern thing since i don't lock my phone and not sure about the activation thing. But it does boot to safe mode
hetaldp said:
Bypassing Google Activation is not Possible in any Version
Bypassing the Drawing Pattern was Patch in RC30
For for RC30 user they are out of luck.
Click to expand...
Click to collapse
In safe mode, only stock apps are loaded. I can post the whole log if anyone wants me to. And yes, its much like windows' safe mode, in a sense.
My wife's g1 is stuck in safe mode.
I have tried the holding menu+power buttons till it boots thing but nothing.
I flashed back to jk 1.41 and nothing.
Any ideas on how to get out of this safe mode.
BigJPR said:
My wife's g1 is stuck in safe mode.
I have tried the holding menu+power buttons till it boots thing but nothing.
I flashed back to jk 1.41 and nothing.
Any ideas on how to get out of this safe mode.
Click to expand...
Click to collapse
?
what do you mean? if you hold the menu + power button, it puts it into safe mode..
boot by holding the power only? also if you know how to use adb hook up your phone and do the following in a cmd prompt
Code:
adb logcat
we may be able to find something causing it, even if it is a little late. and by jk 1.41 you mean jf right?
andonnguyen said:
In safe mode, only stock apps are loaded. I can post the whole log if anyone wants me to. And yes, its much like windows' safe mode, in a sense.
Click to expand...
Click to collapse
B-man007 said:
?
what do you mean? if you hold the menu + power button, it puts it into safe mode..
boot by holding the power only? also if you know how to use adb hook up your phone and do the following in a cmd prompt
Code:
adb logcat
we may be able to find something causing it, even if it is a little late. and by jk 1.41 you mean jf right?
Click to expand...
Click to collapse
I'm sorry, Yeah I meant Jesus freak. If by adb you mean having the setup to develop on the pc then nope, don't have that.
Now I did search this forums and did a google search and found out that if I power off the phone then press and hold both "menu & power red button" I was supposed to get rid of the safe mode, I should say get out of safe mode.
When the phone got stuck in safe mode she was running on of the first rom from JF for 1.5. I also read that if the holding down the bittons thing didn't work I should either reflash or master reset. Is master reset what you do from the phones settttings?
Maybe I'm just missing something. I'm usually not this dumb @ following directions lol. I got on my phone one of the hero rom w apps2sd so I have done some major things (for me) to the phone (this on a different phone. My phone lol). But this got me scratching my head.
Thanks for replying man.
* update
I did the "return to master settings" thing. The phone rebooted and went to the console then I did an alt+w and the thing rebooted to the first activation with the dang "safe mode" still there. Sorry if I'm having a hard time explaining this.
She don't have that new spl. Do you think she can run a non hero rom with it? I want to try and get the new radio and maybe the spl and that newer recovery image in her phone and just maybe a newer 1.5 stable non hero rom and see what happens, eventhou I think non of it has anything to do with phone being stuck on safe mode.
BigJPR said:
I'm sorry, Yeah I meant Jesus freak. If by adb you mean having the setup to develop on the pc then nope, don't have that.
Now I did search this forums and did a google search and found out that if I power off the phone then press and hold both "menu & power red button" I was supposed to get rid of the safe mode, I should say get out of safe mode.
When the phone got stuck in safe mode she was running on of the first rom from JF for 1.5. I also read that if the holding down the bittons thing didn't work I should either reflash or master reset. Is master reset what you do from the phones settttings?
Maybe I'm just missing something. I'm usually not this dumb @ following directions lol. I got on my phone one of the hero rom w apps2sd so I have done some major things (for me) to the phone (this on a different phone. My phone lol). But this got me scratching my head.
Thanks for replying man.
* update
I did the "return to master settings" thing. The phone rebooted and went to the console then I did an alt+w and the thing rebooted to the first activation with the dang "safe mode" still there. Sorry if I'm having a hard time explaining this.
She don't have that new spl. Do you think she can run a non hero rom with it? I want to try and get the new radio and maybe the spl and that newer recovery image in her phone and just maybe a newer 1.5 stable non hero rom and see what happens, eventhou I think non of it has anything to do with phone being stuck on safe mode.
Click to expand...
Click to collapse
Its no problem I'm pretty sure I understand what your saying. Your menu key isn't, stuck is it? The new SPL by Haykuro will work on any almost any ROM, Hero or not. Flashing the radio might help and probably should be done. You can also try to start from step one and go through the steps to re-root it, but DO NOT PUT THE NEW SPL ON YOUR PHONE IF YOU ARE GOING TO DO THIS. downgrading the radio and/or un-rooting while the new spl is still on the phone will brick your phone.
I don't know how the safe mode is persisting across a master-reset (Alt + W)
If you are under warranty or insurance, it might be a good idea to unroot and restore original settings, and have them look at it.
You should also wait for more input by some of the community members here as I'm still inexperienced with Android.
The wife is desperate. She went to our buddy on the tmo store and he tried everything they know on it ofcourse then he found out it was a flashed g1 and told her it might be something screwy going on with it.
At the end of the visit he got the warranty department to send her a new one because "the menu button isn't working" yeah yeah... lol
Anyways... should I un root it anyways for when I have to send it? Thanks for the help man. I've been a member here since I had a dash a couple of years ago but usually don't post cause I sually find the answers to my problems by searching... the ol art of searching ah
Thanks again... ill check the un rooting thread again and will try that.
lol i've only been here a few days and i learned a lot. the people here are generally very helpful and i find almost all of my questions answered so i don't have that many posts either.
Ya you should unroot it because you don't want to have your RMA rejected and besides.... its getting RMA'ed anyway so whats there to lose
B-man007 said:
lol i've only been here a few days and i learned a lot. the people here are generally very helpful and i find almost all of my questions answered so i don't have that many posts either.
Ya you should unroot it because you don't want to have your RMA rejected and besides.... its getting RMA'ed anyway so whats there to lose
Click to expand...
Click to collapse
ive sent back a few g1s rooted with various roms on them, i even asked tech support if it was a issue that it was rooted, let alone running a leaked version of cupcake at the time
the responce i got back both times i asked was that as long as they can get the phone back to a stock rom, it didnt matter what rom was on it, ive yet to have an issue sending back g1's with cupcake on them before cupcake was released
Dimath said:
Well... Don't you still need valid T-mobile sim-card for the first boot after unlocking?
The real reason is, I tried to use my G1 without G1 data plan (-$25 cheaper . It was Ok, I could use WiFi for internet, but I made a factory reset and was not able to pass that activation after - can not use WiFi for that.
Click to expand...
Click to collapse
If you have a SIM with no data plan, you can just bring up the settings menu, connect to WiFi, and then activate. How? Connect using adb shell and type:
Code:
am start -a android.intent.action.MAIN -n com.android.settings/.Settings
All credit goes to JesusFreke for the find:
http://forum.xda-developers.com/showthread.php?t=452316
I really do hope someone will find some interesting uses for safe mode. Since I've already activated with my Google account, Gmail and Market both worked fine for me in safe mode. The only difference I see so far is that all widgets are disabled except: Analog clock, Calendar, Music, Picture frame, and Search. It did not bypass the "connect-the-dots" security drawing pattern for me. Anyone notice some other differences in safe mode?
ive got a black g1 and its stuck on the activation screen how do i get it to the home screen !?.
elkhiid said:
ive got a black g1 and its stuck on the activation screen how do i get it to the home screen !?.
Click to expand...
Click to collapse
What do u mean stuck ? As in u dont have a data plan and want to activate it ? if so refer to this.

[Q] Broke my phone by tethering

I was using my phone for tethering following this post and it was working great.
Today in order to install the Mango Beta update I did a reset on my phone so that the backup step would be faster.
But I forgot to switch back my phone from "HTC Modem" mode to "Zune Sync" mode.
Now it just wont connect to the computer. I cannot install the same XAP file to enable the "Zune Sync" mode as the phone is not dev unlocked (it was dev unlocked before reset).
Now the phone is just recognized as a modem on my machine and Zune just won't recognize it.
I have searched google and the XDA forums but could not find any solution to this issue.
Any pointers to fix this issue will be greatly appreciated.
H8 to say it, but I think you are screwed because u can't unlock your phone. Talk to your carrier, make it seem like you are innocent, ask for a replacement and cross your fingers.
I am sorry
Sent from my mailbox
Have you tried reset via diagnosis menu?
Dial ##634# to get in Diagnostic mode and *2767*3855# to do a full reset.
After changing some settings in my omnia, it wouldn't connect to 3g, no matter what I did. I flashed roms, updates, did a reset via settings menu, called my mobile operator... today I did this reset and the phone wen't back to normal, so I assume that this reset is "harder" then the other
pjlsantos said:
Have you tried reset via diagnosis menu?
Dial ##634# to get in Diagnostic mode and *2767*3855# to do a full reset.
After changing some settings in my omnia, it wouldn't connect to 3g, no matter what I did. I flashed roms, updates, did a reset via settings menu, called my mobile operator... today I did this reset and the phone wen't back to normal, so I assume that this reset is "harder" then the other
Click to expand...
Click to collapse
Tried this, its just for samsung decives. I could not find the Diagnostic code for HTC phones. Thanks for your answer.
Found the following on this thread:
Call ##634#
From the new debugging menu, enter: *#7284#
You see three options come up: Zune, Modem Tethered Call, Modem Diagnostic.
Then its easy to switch to Zune mode. But the problem is it just works on Samsung phones. I am not sure what the Diagnosis code for HD7 is. I have searched everywhere
I am not sure if I can call t-mobile for help as I had unlocked my phone and moved to another carrier.
gauravs said:
I am not sure if I can call t-mobile for help as I had unlocked my phone and moved to another carrier.
Click to expand...
Click to collapse
Act all innocent and just say you have no idea why it won't update, tried on different friend's computers etc. Dont mention it's been unlocked as they will never find out how. However the replacement phone wont be unlocked so you'll have to unlock it again.
When I bought my Toshiba TG01 on Orange, I NEVER put an orange sim card into it, I used it with my O2 sim and I had it returned when it was 11 months
BiG K said:
Act all innocent and just say you have no idea why it won't update, tried on different friend's computers etc. Dont mention it's been unlocked as they will never find out how. However the replacement phone wont be unlocked so you'll have to unlock it again.
When I bought my Toshiba TG01 on Orange, I NEVER put an orange sim card into it, I used it with my O2 sim and I had it returned when it was 11 months
Click to expand...
Click to collapse
Thanks for the response. I will definitely try returning it.

[Q] [i9023] [SOLVED] No keyboard for getting past lockscreen

SOLVED THE PROBLEM; SEE BOTTOM OF POST FOR SOLUTION
Here's the deal, kept short:
Wife's Nexus S just updated to Android 4.1.2
Wife disabled the stock keyboard, because SwiftKey was disabled whenever she restarted her phone
Password on lockscreen
No keyboard for entering the password, only voice input (wtf)
Phone is not developer, so I cannot use ADB; [adb shell input text <password>] followed by [adb shell input keypress 66] is not an option
Phone is not rooted, running stock Android 4.1.2 from Google
and, yes, my mom agreed: I'm special
What can I do? Resetting/wiping the phone to factory defaults is just as much an option as entering the password.
Update:
Tried speaking the password, did not work
Tried following a hard factory reset-guide, did not work
PM me if you have the same problem.
Alrekr said:
Here's the deal, kept short:
Wife's Nexus S just updated to Android 4.1.2
Wife disabled the stock keyboard, because SwiftKey was disabled whenever she restarted her phone
Password on lockscreen
No keyboard for entering the password, only voice input (wtf)
Phone is not developer, so I cannot use ADB; [adb shell input text <password>] followed by [adb shell input keypress 66] is not an option
Phone is not rooted, running stock Android 4.1.2 from Google
and, yes, my mom agreed: I'm special
What can I do? Resetting/wiping the phone to factory defaults is just as much an option as entering the password.
Click to expand...
Click to collapse
How could she disable the stock keyboard? You cannot disable it unless you're rooted.
polobunny said:
How could she disable the stock keyboard? You cannot disable it unless you're rooted.
Click to expand...
Click to collapse
It is entirely possible with Android 4.1.1, apparently. See attached image. My phone is in Danish, but the marked button is the Disable-button. Also, 'Android-tastatur' means 'Android Keyboard'.
Alrekr said:
It is entirely possible with Android 4.1.1, apparently. See attached image. My phone is in Danish, but the marked button is the Disable-button. Also, 'Android-tastatur' means 'Android Keyboard'.
Click to expand...
Click to collapse
Oh boy she really went out of way to disable it haha! You're not supposed to disable a keyboard like that, rather uncheck it from the input section in the settings. I have no idea myself, I was just curious. :/
Unless you're going to factory reset, which should leave data in the storage alone, then I guess you'll have to speak the password.
eksasol said:
Unless you're going to factory reset, which will leave data in the storage alone, then I guess you'll have to speak the password.
Click to expand...
Click to collapse
Yeah, but it is a random collection of letters and numbers, similar to xxxXxXX##X; x'es are letters, #'es are numbers. Also, it doesn't work. We've tried. As soon as I've waited 5 minutes, I will update the description.
I may be wrong, but maybe someone else can help me out.
Try going into download mode and downloading a keyboard from you computer?
Just a thought. Not sure if it would even work.
But then again you said you don't have ADB or whatever. :/
EDIT: Try going to your carrier. :f
He is running stock with no Debugging enabled it won't work. Also download mode is for Odin, not recommended with Nexus devices.
If the device has data and logged into a Google account, then apps can be installed remotely from accessing PlayStore from a webbrowser, though I do not know if it install while in lockscreen mode. Unfortunately, when a keyboard is installed it is not enabled by default until the user select it.
I don't have a Nexus right now but I wonder if one can fastboot boot cwm.img without flashing it thus not requiring a complete wipe via fastnoot oem umlock, I think I'm wrong though. Then you can either clear data, then the keyboard would be reenabled. But since it looks like you do not want to clear the data, I don't know. Probably find a signed update.zip that work with regular recovery, if there is one.
I don't have a solution beside a factory reset.
I wonder if phones thieves find all this useful.
Sent from my SGH-T959
eksasol said:
He is running stock with no Debugging enabled it won't work. Also download mode is for Odin, not recommended with Nexus devices.
If the device has data and logged into a Google account, then apps can be installed remotely from accessing PlayStore from a webbrowser, though I do not know if it install while in lockscreen mode. Unfortunately, when a keyboard is installed it is not enabled by default until the user select it.
I don't have a Nexus right now but I wonder if one can fastboot boot cwm.img without flashing it thus not requiring a complete wipe via fastnoot oem umlock, I think I'm wrong though. Then you can either clear data, then the keyboard would be reenabled. But since it looks like you do not want to clear the data, I don't know. Probably find a signed update.zip that work with regular recovery, if there is one.
I don't have a solution beside a factory reset.
I wonder if phones thieves find all this useful.
Sent from my SGH-T959
Click to expand...
Click to collapse
Wiping the data was an option, and that was what we did. I didn't think of the thief-dilemma. Will edit the original post in a few minutes.
Alrekr said:
Wiping the data was an option, and that was what we did. I didn't think of the thief-dilemma. Will edit the original post in a few minutes.
Click to expand...
Click to collapse
From your post we assumed you didn't want to wipe your data, not that you couldn't figure out how to do it. Misunderstanding I believe.
polobunny said:
From your post we assumed you didn't want to wipe your data, not that you couldn't figure out how to do it. Misunderstanding I believe.
Click to expand...
Click to collapse
My English sucks sometimes, sorry. I see where the confusion came from. Allow me to be clear (pun intended): Wiping the phone was an option; entering the password somehow was also an option; as long as I could do it myself, without bricking the phone, and as long as I didn't have to buy a new phone it was an option.
Alrekr said:
My English sucks sometimes, sorry. I see where the confusion came from. Allow me to be clear (pun intended): Wiping the phone was an option; entering the password somehow was also an option; as long as I could do it myself, without bricking the phone, and as long as I didn't have to buy a new phone it was an option.
Click to expand...
Click to collapse
No problem, these things happen. At least you fixed your problem.
You may want to start the device in safe mode, I did it that way and was able to change the keyboard to the android stock keyboard. Google your device to find out how to start the device in safe mode.
Sent from my GT-N5110 using Tapatalk

[HELP] Cannot factory reset a Kyocera Hydro Wave (C6740N) on Metro PCS

Greetings to all the developers and registered users on this site... Yes, this is my first post, but I read here pretty often and I used the search function, trust me! Seriously, I've tried all I could and I am at my wits end, but this is technology, we can't let it own us, we gotta continue owning it and that's what online communities like xda help us do, so thanks for all your past, present, and future contributions here. So I got this Metro PCS Kyocera Hydro Wave (C6740N) that I can't factory reset for a number of reasons, but mainly because I believe that there is either no boot-loader or no recovery partition as a result of Metro PCS flashing the ROM...
Anyway, lets get to the juice:
- Device powers on/off, but no combo of Vol -/+ and Power buttons bring up a recovery menu or anything (holding any combo down just boot-loops)
- Device has no SIM and no micro SD card, and the battery is not removable
- Device is locked... Like, pattern-locked/google account info/too many attempts/yada yada yada
- Device has no data and no WiFi connection active, so I could not use the google account to get past the lockscreen
- Device does not have USB debugging enabled/Google drivers for ADB do not work (Windows 7 auto-detects when I plug in the phone and installs a generic Microsoft driver which cannot be removed even after uninstalling the device, and also I pointed the Device Manager to the correct Google drivers I installed with the Android SDK Tools, as well as the Samsung Naked Universal Drivers I found on this forum, and Kyocera ADB drivers I found through Google which all failed, Windows returned a message stating that the most up-to-date or best driver for this device is already installed)
What I've tried (everything possible really):
- Hard reset/Recovery from phone: FAILED
- Connect to Linux and install ADB, then tried running the adb shell, adb devices, fastboot devices, etc but phone not detected: FAILED
- Connect to Windows 7 and install ADB (Android SDK Tools), I literally checked every single box and installed Platform-tools, google drivers, everything, got to the command prompt as admin, cd to the ADB directory, ran same commands as in linux, also tried commands on several forums and posts like adb shell rm /data/system/gesture.key to remove the lock but everything: FAILED
- Connect to Windows 7 and attempt to install proper drivers using RootGenius, MoboRobo, PDAnet, and several other suggestions which all were oblivious/unable to detect the device despite Windows recognizing it, so they all: FAILED
- Connect to Windows 7 and attempt running ADB through a Cygwin terminal, but the command "sudo" was not recognized/not valid, so: FAILED
- Connect to Windows 7 and use XRYViewer to extract data from the phone, possibly to see the system files and get an actual understanding of what everybody is saying you need to mount from the recovery partition, but no clue how to use this, since I can't find an XRY file in the internal storage, so: FAILED
- Connect to Windows 7 and access data/recover data from device using "Wondershare Dr.Fone for Android" and "iLike Android Data Recovery Pro" but both programs instructed me to enable USB Debugging, which is not possible, so the both also: FAILED
Despite this being my first post, I have scoured the forums here in addition to every other forum and webpage regarding this issue as well... There just isn't much about this phone except negative reviews, and I have come to the conclusion that on this particular model phone, I am out of options... I have a paperweight... I'm not very familiar with Android... So please correct me if I'm wrong...
Any input?
I'm curious if there are any options at this point, I have been trying to get through to this phone on several computers for the past couple days and it is frustrating me... Any input from the community would be much appreciated...
Mojo2XL, I guess you did not find an answer?
Mojo2XL said:
I'm curious if there are any options at this point, I have been trying to get through to this phone on several computers for the past couple days and it is frustrating me... Any input from the community would be much appreciated...
Click to expand...
Click to collapse
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
eenuckols said:
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
Click to expand...
Click to collapse
may be this:
*2767*3855# - Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
I found code in internet, but may be it works? can't check, my "wave" comes to me from USA by post for a few weeks..
barabeka said:
may be this:
*2767*3855# - Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
I found code in internet, but may be it works? can't check, my "wave" comes to me from USA by post for a few weeks..
Click to expand...
Click to collapse
doesnt work.. you can only get to emergency dialer which can only b used to make emergency calls
elliwigy said:
doesnt work.. you can only get to emergency dialer which can only b used to make emergency calls
Click to expand...
Click to collapse
okay. i will try something, when my phone will come. is your Wave locked?
barabeka said:
okay. i will try something, when my phone will come. is your Wave locked?
Click to expand...
Click to collapse
i bought another phone and they threw it in free but it has a pin code lock so i cant even get to google screen to bypass frp as im stuck at pin lockscreen and these darnphones have no recovery..
i doubt ull figure out a way as im real savvy with this stuff lol theres no recovery to boot into in order to reset and no way to update tje phone wothout knowing the pin code
any luck? i cant believe this thing is this locked down. makes apple look like chils play
warriorpluto said:
any luck? i cant believe this thing is this locked down. makes apple look like chils play
Click to expand...
Click to collapse
i believe it can be done with a pc
Did you happen to get the files the other member posted that was only available for eight days?
Mojo2XL - Sort of.
I saw a youtub video (sorry no link) that says there was a OTA update that changed the phone's firmware that solved all the problems mentioned here. Thing is I have no carrier and cannot find this new firmware, but, I am still hunting....
​
eenuckols said:
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
Click to expand...
Click to collapse
I'm having the same problem, I have been trying to get this thing to hard reset for a week now. There has to be a way to reset this Hydro Wave.. Has anyone dealt with this thing?
Hey hold the buttons as follows volume- & power at the exact same time while your phone is off be warned if you phone was preowned you need the goole account originally activeated with that phone if you do not have that then your in the same vote as me i cant remember any of my gmail account info to my wave from when i had it active I have litterally tried every thing to recover the info and i still can't recover it
WhiteWolf77 said:
Hey hold the buttons as follows volume- & power at the exact same time while your phone is off be warned if you phone was preowned you need the goole account originally activeated with that phone if you do not have that then your in the same vote as me i cant remember any of my gmail account info to my wave from when i had it active I have litterally tried every thing to recover the info and i still can't recover it
Click to expand...
Click to collapse
That doesn't work on this phone the hydro wave from AT&T has factory reset protection so it cannot be reset using the volume down and power button reset
Any update?
dannybz said:
Any update?
Click to expand...
Click to collapse
let me work on this, been trying to master as many FRP bypasses as i can. I don't have the device but a client is in the same boat
I accidentally stumbled upon a something weird. I've managed to make the camera crash to the home screen somehow. I believe this was a result of holding both volume buttons and opening numerous menus while using the camera. My guess is that it overloads it after a certain amount of times and causes it to crash. I've gotten the android UI to crash like this before. I will try to recreate the scenario and update you guys on this. it's on a Kyocera Hydro Wave. Running android 5.0 I believe. Try going wild until the phone starts to lag. eventually stuff will crash and the lock screen may go with it. use this to your advantage and enable USB debugging as quickly as possible because it will reset itself after about 30 seconds. Someone else on YouTube has recently told me that it worked for them. I would look into doing that.
PhoneScrambler said:
I accidentally stumbled upon a something weird. I've managed to make the camera crash to the home screen somehow. I believe this was a result of holding both volume buttons and opening numerous menus while using the camera. My guess is that it overloads it after a certain amount of times and causes it to crash. I've gotten the android UI to crash like this before. I will try to recreate the scenario and update you guys on this. it's on a Kyocera Hydro Wave. Running android 5.0 I believe. Try going wild until the phone starts to lag. eventually stuff will crash and the lock screen may go with it. use this to your advantage and enable USB debugging as quickly as possible because it will reset itself after about 30 seconds. Someone else on YouTube has recently told me that it worked for them. I would look into doing that.
Click to expand...
Click to collapse
Is there anything a little more realistic possible? Lol, I can see an update available, can't connect to WiFi to update haha. The stuff they lock these phones with anymore i swear
I'm new to this forum, but NOT new to this site . I have visited here on numerous occasions seeking the help that needed . With that being said, I would like to offer a Bonafide, Tried and True way to factory reset the Kyocera Hydrowave . I KNOW that this work's for I have done in on numerous occasions for a friend of mine that works for Metro PCS ....
Step One: Completely power off the phone .
Step Two: Hold the Power AND Volume DOWN Buttons SIMULTANEOUSLY .
Step Three: DO NOT release any buttons, even when you get to the Boot Menu . (Very Important, If you don't do it right, you have to start all over lol ) .
Step Four: Once inside the Boot Menu, ONLY release the Power Button; or the Boot Menu will close and you have to start all over again .
Step Five: Use the Volume Down Button to Highlight the Wipe/Factory Reset Option .
Step Six: Use the Power Button to Select the option .
Step Seven: Watch the bottom of the screen for the progress, and then use the Volume Up Button to restart .
And there you have it . I hope that this helps out SOMEONE out there, because I feel good giving back for the help that I have received on here .
PS.( If you would like for me to post a Video Tutorial on this, can someone please tell me how to post the Video; I guess by me being a Newbie on here, I'm not allowed to do as of yet ) . If Anyone needs to contact me, as I'm not on here very often, my email is [email protected] .
LilAnt530 said:
Is there anything a little more realistic possible? Lol, I can see an update available, can't connect to WiFi to update haha. The stuff they lock these phones with anymore i swear
Click to expand...
Click to collapse
As unrealistic as it may sound it actually works Trust me on this. its similar to the LG attack which... is nothing but entering a long password.
betanews.com/2015/09/16/bypass-the-android-lollipop-lockscreen-by-entering-a-really-long-password
Just give it a go. it already worked for one dude on youtube. it takes a while but it honestly works. If you can get it, update the phone as soon as possible turn the screen timeout off and let it update. when the phone resets the update will install and you will be able to factory reset.
I mean it couldn't hurt. if you're locked out with no factory reset and ADB tools won't work what else can you do?

Categories

Resources