Database Info

Safe Mode on G1

From androidcommunity.com, not sure how useful.
found a way to enter "safe mode" which will bypass the initial gmail signin and allow you to straight to the good stuff with out activating via google. You can also bypass the security drawing pattern.
1. Power off your device
2. While device is powering back on press and hold the "menu" key, keep holding it past the G1 and android splash screen.
Phone will boot all the way to the main screen and display "safe mode" in lower left corner.
I have confirmed that data is still fully operational and all of my downloaded programs.
http://androidcommunity.com/forums/f41/g1-safe-mode-2565/

Which firmware are you running? I'm on ota rc30 and I can't repro. I wonder if this was fixed in an update.
I should say, I can get into safe mode, but I can't get past the initial google sign-in screen.

Bypassing Google Activation is not Possible in any Version
Bypassing the Drawing Pattern was Patch in RC30
For for RC30 user they are out of luck.

hetaldp said:
Bypassing Google Activation is not Possible in any Version...
Click to expand...
Click to collapse
Shouldn't it help to start the phone with non T-mobile sim card?

Why u require to bypass Activation Process
You can Unlock the Phone and add your GPRS Setting and Activate the Phone Officially on your Carrier.

Well... Don't you still need valid T-mobile sim-card for the first boot after unlocking?
The real reason is, I tried to use my G1 without G1 data plan (-$25 cheaper . It was Ok, I could use WiFi for internet, but I made a factory reset and was not able to pass that activation after - can not use WiFi for that.

You require Valid TMobile SIM only for Activation becuase GPRS Setting Preset in Phone.
But if you have Any other Non TMobile SIM Card Press Menu Button this will popup APN Setting Just Press it again Press Menu Button this will popup New APN Just Add your Carrier APN, Mobile Country Code and Mobile Network Code And reboot. If you can see G or E or 3G on top Bar your Data is Activated Just follow with your Google A/c and Password and you did it

hetaldp said:
You require Valid TMobile SIM only for Activation becuase GPRS Setting Preset in Phone.
But if you have Any other Non TMobile SIM Card Press Menu Button this will popup APN Setting Just Press it again Press Menu Button this will popup New APN Just Add your Carrier APN, Mobile Country Code and Mobile Network Code And reboot. If you can see G or E or 3G on top Bar your Data is Activated Just follow with your Google A/c and Password and you did it
Click to expand...
Click to collapse
@Hetaldp
Thanks 8! i was going almost crazy to get around this checked almost every forum but no body could give me a suggestion like this! thanks for you now i know how to set up my own account!
WBR
ReyTech.

I was able to get into safe mode via holding down the Menu Key while booting. Open Home was giving me issues and i was unable to get past the "Android" splash screen. Booted to safe mode via the initial instructions and was able to uninstall open home. I'm using JF's 1.5 ADP w/LucidREM App2Sd image. So the "safe mode" works in the newest release. I can't account for getting past the drawing pattern thing since i don't lock my phone and not sure about the activation thing. But it does boot to safe mode
hetaldp said:
Bypassing Google Activation is not Possible in any Version
Bypassing the Drawing Pattern was Patch in RC30
For for RC30 user they are out of luck.
Click to expand...
Click to collapse

In safe mode, only stock apps are loaded. I can post the whole log if anyone wants me to. And yes, its much like windows' safe mode, in a sense.

My wife's g1 is stuck in safe mode.
I have tried the holding menu+power buttons till it boots thing but nothing.
I flashed back to jk 1.41 and nothing.
Any ideas on how to get out of this safe mode.

BigJPR said:
My wife's g1 is stuck in safe mode.
I have tried the holding menu+power buttons till it boots thing but nothing.
I flashed back to jk 1.41 and nothing.
Any ideas on how to get out of this safe mode.
Click to expand...
Click to collapse
?
what do you mean? if you hold the menu + power button, it puts it into safe mode..
boot by holding the power only? also if you know how to use adb hook up your phone and do the following in a cmd prompt
Code:
adb logcat
we may be able to find something causing it, even if it is a little late. and by jk 1.41 you mean jf right?

andonnguyen said:
In safe mode, only stock apps are loaded. I can post the whole log if anyone wants me to. And yes, its much like windows' safe mode, in a sense.
Click to expand...
Click to collapse
B-man007 said:
?
what do you mean? if you hold the menu + power button, it puts it into safe mode..
boot by holding the power only? also if you know how to use adb hook up your phone and do the following in a cmd prompt
Code:
adb logcat
we may be able to find something causing it, even if it is a little late. and by jk 1.41 you mean jf right?
Click to expand...
Click to collapse
I'm sorry, Yeah I meant Jesus freak. If by adb you mean having the setup to develop on the pc then nope, don't have that.
Now I did search this forums and did a google search and found out that if I power off the phone then press and hold both "menu & power red button" I was supposed to get rid of the safe mode, I should say get out of safe mode.
When the phone got stuck in safe mode she was running on of the first rom from JF for 1.5. I also read that if the holding down the bittons thing didn't work I should either reflash or master reset. Is master reset what you do from the phones settttings?
Maybe I'm just missing something. I'm usually not this dumb @ following directions lol. I got on my phone one of the hero rom w apps2sd so I have done some major things (for me) to the phone (this on a different phone. My phone lol). But this got me scratching my head.
Thanks for replying man.
* update
I did the "return to master settings" thing. The phone rebooted and went to the console then I did an alt+w and the thing rebooted to the first activation with the dang "safe mode" still there. Sorry if I'm having a hard time explaining this.
She don't have that new spl. Do you think she can run a non hero rom with it? I want to try and get the new radio and maybe the spl and that newer recovery image in her phone and just maybe a newer 1.5 stable non hero rom and see what happens, eventhou I think non of it has anything to do with phone being stuck on safe mode.

BigJPR said:
I'm sorry, Yeah I meant Jesus freak. If by adb you mean having the setup to develop on the pc then nope, don't have that.
Now I did search this forums and did a google search and found out that if I power off the phone then press and hold both "menu & power red button" I was supposed to get rid of the safe mode, I should say get out of safe mode.
When the phone got stuck in safe mode she was running on of the first rom from JF for 1.5. I also read that if the holding down the bittons thing didn't work I should either reflash or master reset. Is master reset what you do from the phones settttings?
Maybe I'm just missing something. I'm usually not this dumb @ following directions lol. I got on my phone one of the hero rom w apps2sd so I have done some major things (for me) to the phone (this on a different phone. My phone lol). But this got me scratching my head.
Thanks for replying man.
* update
I did the "return to master settings" thing. The phone rebooted and went to the console then I did an alt+w and the thing rebooted to the first activation with the dang "safe mode" still there. Sorry if I'm having a hard time explaining this.
She don't have that new spl. Do you think she can run a non hero rom with it? I want to try and get the new radio and maybe the spl and that newer recovery image in her phone and just maybe a newer 1.5 stable non hero rom and see what happens, eventhou I think non of it has anything to do with phone being stuck on safe mode.
Click to expand...
Click to collapse
Its no problem I'm pretty sure I understand what your saying. Your menu key isn't, stuck is it? The new SPL by Haykuro will work on any almost any ROM, Hero or not. Flashing the radio might help and probably should be done. You can also try to start from step one and go through the steps to re-root it, but DO NOT PUT THE NEW SPL ON YOUR PHONE IF YOU ARE GOING TO DO THIS. downgrading the radio and/or un-rooting while the new spl is still on the phone will brick your phone.
I don't know how the safe mode is persisting across a master-reset (Alt + W)
If you are under warranty or insurance, it might be a good idea to unroot and restore original settings, and have them look at it.
You should also wait for more input by some of the community members here as I'm still inexperienced with Android.

The wife is desperate. She went to our buddy on the tmo store and he tried everything they know on it ofcourse then he found out it was a flashed g1 and told her it might be something screwy going on with it.
At the end of the visit he got the warranty department to send her a new one because "the menu button isn't working" yeah yeah... lol
Anyways... should I un root it anyways for when I have to send it? Thanks for the help man. I've been a member here since I had a dash a couple of years ago but usually don't post cause I sually find the answers to my problems by searching... the ol art of searching ah
Thanks again... ill check the un rooting thread again and will try that.

lol i've only been here a few days and i learned a lot. the people here are generally very helpful and i find almost all of my questions answered so i don't have that many posts either.
Ya you should unroot it because you don't want to have your RMA rejected and besides.... its getting RMA'ed anyway so whats there to lose

B-man007 said:
lol i've only been here a few days and i learned a lot. the people here are generally very helpful and i find almost all of my questions answered so i don't have that many posts either.
Ya you should unroot it because you don't want to have your RMA rejected and besides.... its getting RMA'ed anyway so whats there to lose
Click to expand...
Click to collapse
ive sent back a few g1s rooted with various roms on them, i even asked tech support if it was a issue that it was rooted, let alone running a leaked version of cupcake at the time
the responce i got back both times i asked was that as long as they can get the phone back to a stock rom, it didnt matter what rom was on it, ive yet to have an issue sending back g1's with cupcake on them before cupcake was released

Dimath said:
Well... Don't you still need valid T-mobile sim-card for the first boot after unlocking?
The real reason is, I tried to use my G1 without G1 data plan (-$25 cheaper . It was Ok, I could use WiFi for internet, but I made a factory reset and was not able to pass that activation after - can not use WiFi for that.
Click to expand...
Click to collapse
If you have a SIM with no data plan, you can just bring up the settings menu, connect to WiFi, and then activate. How? Connect using adb shell and type:
Code:
am start -a android.intent.action.MAIN -n com.android.settings/.Settings
All credit goes to JesusFreke for the find:
http://forum.xda-developers.com/showthread.php?t=452316
I really do hope someone will find some interesting uses for safe mode. Since I've already activated with my Google account, Gmail and Market both worked fine for me in safe mode. The only difference I see so far is that all widgets are disabled except: Analog clock, Calendar, Music, Picture frame, and Search. It did not bypass the "connect-the-dots" security drawing pattern for me. Anyone notice some other differences in safe mode?

ive got a black g1 and its stuck on the activation screen how do i get it to the home screen !?.

elkhiid said:
ive got a black g1 and its stuck on the activation screen how do i get it to the home screen !?.
Click to expand...
Click to collapse
What do u mean stuck ? As in u dont have a data plan and want to activate it ? if so refer to this.

[Q] [Too many pattern tries] How can I switch on wi-fi?

Like many others, I have become a victim of 'Too many pattern tries' and have got stuck at the lock screen trying to sign in without data connection or wi-fi. Is there any way to get past this without data rewipe. It's really stupid of Google to have a security mechanism that forces you to wipe your data, meaning anyone can just pick up your phone and spam the pattern till it goes to the email screen (which is what happened in my case).
I have a rooted phone with an unlocked bootloader and USB debugging enabled and I also have downloaded Eclipse Android SDK but have no idea how to use it. It would be nice if someone gave me step-wise instructions on switching on my wi-fi through the SDK so that I can connect over the internet and log in.
Of course, any other legit method is also fine, but the 'home button method' doesn't work for my phone (you know, keep pressing the home button). I have tried getting APKs that will help me bypass the lock screen but they dont work.

XtrGamer said:
Like many others, I have become a victim of 'Too many pattern tries' and have got stuck at the lock screen trying to sign in without data connection or wi-fi. Is there any way to get past this without data rewipe. It's really stupid of Google to have a security mechanism that forces you to wipe your data, meaning anyone can just pick up your phone and spam the pattern till it goes to the email screen (which is what happened in my case).
I have a rooted phone with an unlocked bootloader and USB debugging enabled and I also have downloaded Eclipse Android SDK but have no idea how to use it. It would be nice if someone gave me step-wise instructions on switching on my wi-fi through the SDK so that I can connect over the internet and log in.
Of course, any other legit method is also fine, but the 'home button method' doesn't work for my phone (you know, keep pressing the home button). I have tried getting APKs that will help me bypass the lock screen but they dont work.
Click to expand...
Click to collapse
open playstore in your pc browser login to gmail you and on the right corner see "device manager" select your device and change the code put new password which is easy to remember .. should be all done

FarrukhQadri said:
open playstore in your pc browser login to gmail you and on the right corner see "device manager" select your device and change the code put new password which is easy to remember .. should be all done
Click to expand...
Click to collapse
Android Device Manager is not able to pinpoint the location of my phone. Do I need wi-fi for this? The only options I see right now for my phone are to change the name, give it a ring or lock or erase.

I have finally found a way. No root or USB debugging required.
https://www.youtube.com/watch?v=-coXtbKEzYg

good
XtrGamer said:
I have finally found a way. No root or USB debugging required.
https://www.youtube.com/watch?v=-coXtbKEzYg
Click to expand...
Click to collapse
thanks for sharing

[Q] How to access data from locked s6, no wifi, no debugging

Model: SM - G920W8 (Canadian)
I recently purchased an s6 (1 month) and used the fingerprint scanner to secure the device. I made a backup password and made sure it worked and all was well until one day when it all of a sudden stopped working. Normally I leave Wifi on and could solve this issue but as to save battery I had disabled it this time around, silly me. So the fingerprint scanner denied my entry, led me to the backup password which also failed (even though it was correct) and then Wifi was off so Google verification did not work.
Being a new phone, I did not get a chance to turn on USB debugging (this happened 1 week after purchase) so using ADB to turn on wifi was of no use, it did not recognize the device.
Here is what I have tried to do to recover the data up till now:
>I used ODIN to install TWRP on the device.
>With TWRP enabled I made a backup of the data and attempted to connect to adb once again, Using my sisters Galaxy S6 I tested out whether hers worked, just to make sure everything was fine with the drivers and to make sure adb devices recognized her phone: it did.
>I ran ADB devices while in TWRP and it recognized my device, but came back OFFLINE, meaning no commands were able to run.
>I then attempted to run a series of drivers and to access files directly from windows 7 and did not have access permissions to read nor write, thus unsuccessful.
>I went back to ODIN and sought out a stock rom to flash to the partition in order to get access to the backup data i had created using TWRP, as there seems to be methods to flash a rom and maintain the backup data.
> With ODIN i tried this, but was unsuccessful, as it got stuck on "Nand Write start" and would not initialize any transfer with the phone . ( The download mode would not start the progress bar)
>Finally i tried to do it with TWRP but because i have no write permissions, i cannot put anything onto the device for it to run.
I called Samsung about this and they know of the issue and refuse to help me other than a useless factory reset. They knowingly allow users to continue using their fingerprint option for security but do not give warning of its issue, nor do they provide a simple fix like allowing wifi to be turned on from the lock screen. It is a shame that a company like this just allows a known software bug to bother users but doesn't make them aware of it, nor provides a temporary fix while they work on fixing the issue.
I am stuck, and need your help, I have done everything I can think of but can't get anywhere, please help me retrieve my data. Thanks

Wifi is off but how about 4G/LTE data?

If your 4g lte data is working you can use findmymobile(samsung site) and unlock it from there. There's an option to unlock your phone. I came across this issue last month.
Sent from my SM-G920T1 using Tapatalk

Yeah LTE is also off, otherwise google login would have worked.

I can access the WiFi toggle from the lockscreen without having unlocked the phone via FP - although I'm not locked out the phone so wondering if being locked out stops you gaining access to the notification drawer as well

EddyOS said:
I can access the WiFi toggle from the lockscreen without having unlocked the phone via FP - although I'm not locked out the phone so wondering if being locked out stops you gaining access to the notification drawer as well
Click to expand...
Click to collapse
Via FP? well I can indeed access the notification drawer (from the top, right?) but when i enable wifi it asks me to login using the fingerprint.

EddyOS said:
I can access the WiFi toggle from the lockscreen without having unlocked the phone via FP - although I'm not locked out the phone so wondering if being locked out stops you gaining access to the notification drawer as well
Click to expand...
Click to collapse
What does "FP" stand for?

Shady_D said:
Via FP? well I can indeed access the notification drawer (from the top, right?) but when i enable wifi it asks me to login using the fingerprint.
Click to expand...
Click to collapse
sparky2012 said:
What does "FP" stand for?
Click to expand...
Click to collapse
FP - Finger Print

i have the same problem what to do now i dont want to lose data and my s6 edge is not recognising my fingerprint rather asking for a backup password and i forgot the backup password so the wifi or mobile data is switched off and i cant even turn it on what to do now?????

I have the same problem...agree completely "They knowingly allow users to continue using their fingerprint option for security but do not give warning of its issue, nor do they provide a simple fix like allowing wifi to be turned on from the lock screen. It is a shame that a company like this just allows a known software bug to bother users but doesn't make them aware of it, nor provides a temporary fix while they work on fixing the issue."
factory reset is "the only way" to unlock it. Lazy samsung customer service response.
logging in via google is not an option on S6 / new android system anymore so if you forget your pin you're stuffed
this is really poor on samsung behalf to not give warning of the seriousness of using a fingerprint scanner
ha I can't remember (and can't check now) but does it even ask for the pin twice to verify what you entered what was intended?
google use to have a device pin reset but it was removed recently.
I bet heaps of people have this issue.
I am desperate for a solution...

I just registered to help future users having the same problem.
Guys I spent around 15 hours trying to unlock my samsung galaxy s6, and found a solution. You're wellcome because you need google acc+dont need a connection for this to work (worst case scenario).
It didnt recongnize my fingerprints, and my backup password didnt work. I couldnt sign in to my google account since my wifi and mobile data was turned off before the device locked.
This is the solution i found AFTER 15 hours of this madness, you need to be quick:
1) enter wrong backup password 5 times
2) wait 30 secounds countdown
3) enter wrong backup password 5 times
4) wait 30 secounds countdown
5) select sign in with google account
6) enter google account credentials (DONT SIGN IN YET)
7) hold 'wake up button' (home button)
8) press emergency mode and go thru with aggreeing to all it asks you to
9) press TURN ON, and after that press 'sign in' with your google account (where step 6 left off)
If you were quick enough, you will enter emergency mode and you will pass the lock screen, now quit the emergency mode the same way and change your backup password, and write it down this time so this doesnt happen again. You are wellcome.

Thank you, that happened on 4th try, "quick enough" is the key. It appears that it turns on WiFi and mobile data for fraction of a second during the process.

yeah i seen that for a fraction of seconds wifi turns on but how should i unlock i am not done please please help me i dont want to lose my imp data

THANK YOU!!!
Diablola said:
I just registered to help future users having the same problem.
Guys I spent around 15 hours trying to unlock my samsung galaxy s6, and found a solution. You're wellcome because you need google acc+dont need a connection for this to work (worst case scenario).
It didnt recongnize my fingerprints, and my backup password didnt work. I couldnt sign in to my google account since my wifi and mobile data was turned off before the device locked.
This is the solution i found AFTER 15 hours of this madness, you need to be quick:
1) enter wrong backup password 5 times
2) wait 30 secounds countdown
3) enter wrong backup password 5 times
4) wait 30 secounds countdown
5) select sign in with google account
6) enter google account credentials (DONT SIGN IN YET)
7) hold 'wake up button' (home button)
8) press emergency mode and go thru with aggreeing to all it asks you to
9) press TURN ON, and after that press 'sign in' with your google account (where step 6 left off)
If you were quick enough, you will enter emergency mode and you will pass the lock screen, now quit the emergency mode the same way and change your backup password, and write it down this time so this doesnt happen again. You are wellcome.
Click to expand...
Click to collapse
Created an account just so I can thank you :laugh: You've made my night; am so happy and stress-free now!

[HELP] Cannot factory reset a Kyocera Hydro Wave (C6740N) on Metro PCS

Greetings to all the developers and registered users on this site... Yes, this is my first post, but I read here pretty often and I used the search function, trust me! Seriously, I've tried all I could and I am at my wits end, but this is technology, we can't let it own us, we gotta continue owning it and that's what online communities like xda help us do, so thanks for all your past, present, and future contributions here. So I got this Metro PCS Kyocera Hydro Wave (C6740N) that I can't factory reset for a number of reasons, but mainly because I believe that there is either no boot-loader or no recovery partition as a result of Metro PCS flashing the ROM...
Anyway, lets get to the juice:
- Device powers on/off, but no combo of Vol -/+ and Power buttons bring up a recovery menu or anything (holding any combo down just boot-loops)
- Device has no SIM and no micro SD card, and the battery is not removable
- Device is locked... Like, pattern-locked/google account info/too many attempts/yada yada yada
- Device has no data and no WiFi connection active, so I could not use the google account to get past the lockscreen
- Device does not have USB debugging enabled/Google drivers for ADB do not work (Windows 7 auto-detects when I plug in the phone and installs a generic Microsoft driver which cannot be removed even after uninstalling the device, and also I pointed the Device Manager to the correct Google drivers I installed with the Android SDK Tools, as well as the Samsung Naked Universal Drivers I found on this forum, and Kyocera ADB drivers I found through Google which all failed, Windows returned a message stating that the most up-to-date or best driver for this device is already installed)
What I've tried (everything possible really):
- Hard reset/Recovery from phone: FAILED
- Connect to Linux and install ADB, then tried running the adb shell, adb devices, fastboot devices, etc but phone not detected: FAILED
- Connect to Windows 7 and install ADB (Android SDK Tools), I literally checked every single box and installed Platform-tools, google drivers, everything, got to the command prompt as admin, cd to the ADB directory, ran same commands as in linux, also tried commands on several forums and posts like adb shell rm /data/system/gesture.key to remove the lock but everything: FAILED
- Connect to Windows 7 and attempt to install proper drivers using RootGenius, MoboRobo, PDAnet, and several other suggestions which all were oblivious/unable to detect the device despite Windows recognizing it, so they all: FAILED
- Connect to Windows 7 and attempt running ADB through a Cygwin terminal, but the command "sudo" was not recognized/not valid, so: FAILED
- Connect to Windows 7 and use XRYViewer to extract data from the phone, possibly to see the system files and get an actual understanding of what everybody is saying you need to mount from the recovery partition, but no clue how to use this, since I can't find an XRY file in the internal storage, so: FAILED
- Connect to Windows 7 and access data/recover data from device using "Wondershare Dr.Fone for Android" and "iLike Android Data Recovery Pro" but both programs instructed me to enable USB Debugging, which is not possible, so the both also: FAILED
Despite this being my first post, I have scoured the forums here in addition to every other forum and webpage regarding this issue as well... There just isn't much about this phone except negative reviews, and I have come to the conclusion that on this particular model phone, I am out of options... I have a paperweight... I'm not very familiar with Android... So please correct me if I'm wrong...

Any input?
I'm curious if there are any options at this point, I have been trying to get through to this phone on several computers for the past couple days and it is frustrating me... Any input from the community would be much appreciated...

Mojo2XL, I guess you did not find an answer?
Mojo2XL said:
I'm curious if there are any options at this point, I have been trying to get through to this phone on several computers for the past couple days and it is frustrating me... Any input from the community would be much appreciated...
Click to expand...
Click to collapse
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~

eenuckols said:
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
Click to expand...
Click to collapse
may be this:
*2767*3855# - Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
I found code in internet, but may be it works? can't check, my "wave" comes to me from USA by post for a few weeks..

barabeka said:
may be this:
*2767*3855# - Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
I found code in internet, but may be it works? can't check, my "wave" comes to me from USA by post for a few weeks..
Click to expand...
Click to collapse
doesnt work.. you can only get to emergency dialer which can only b used to make emergency calls

elliwigy said:
doesnt work.. you can only get to emergency dialer which can only b used to make emergency calls
Click to expand...
Click to collapse
okay. i will try something, when my phone will come. is your Wave locked?

barabeka said:
okay. i will try something, when my phone will come. is your Wave locked?
Click to expand...
Click to collapse
i bought another phone and they threw it in free but it has a pin code lock so i cant even get to google screen to bypass frp as im stuck at pin lockscreen and these darnphones have no recovery..
i doubt ull figure out a way as im real savvy with this stuff lol theres no recovery to boot into in order to reset and no way to update tje phone wothout knowing the pin code

any luck? i cant believe this thing is this locked down. makes apple look like chils play

warriorpluto said:
any luck? i cant believe this thing is this locked down. makes apple look like chils play
Click to expand...
Click to collapse
i believe it can be done with a pc

Did you happen to get the files the other member posted that was only available for eight days?

Mojo2XL - Sort of.
I saw a youtub video (sorry no link) that says there was a OTA update that changed the phone's firmware that solved all the problems mentioned here. Thing is I have no carrier and cannot find this new firmware, but, I am still hunting....
​
eenuckols said:
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
Click to expand...
Click to collapse

I'm having the same problem, I have been trying to get this thing to hard reset for a week now. There has to be a way to reset this Hydro Wave.. Has anyone dealt with this thing?

Hey hold the buttons as follows volume- & power at the exact same time while your phone is off be warned if you phone was preowned you need the goole account originally activeated with that phone if you do not have that then your in the same vote as me i cant remember any of my gmail account info to my wave from when i had it active I have litterally tried every thing to recover the info and i still can't recover it

WhiteWolf77 said:
Hey hold the buttons as follows volume- & power at the exact same time while your phone is off be warned if you phone was preowned you need the goole account originally activeated with that phone if you do not have that then your in the same vote as me i cant remember any of my gmail account info to my wave from when i had it active I have litterally tried every thing to recover the info and i still can't recover it
Click to expand...
Click to collapse
That doesn't work on this phone the hydro wave from AT&T has factory reset protection so it cannot be reset using the volume down and power button reset

Any update?

dannybz said:
Any update?
Click to expand...
Click to collapse
let me work on this, been trying to master as many FRP bypasses as i can. I don't have the device but a client is in the same boat

I accidentally stumbled upon a something weird. I've managed to make the camera crash to the home screen somehow. I believe this was a result of holding both volume buttons and opening numerous menus while using the camera. My guess is that it overloads it after a certain amount of times and causes it to crash. I've gotten the android UI to crash like this before. I will try to recreate the scenario and update you guys on this. it's on a Kyocera Hydro Wave. Running android 5.0 I believe. Try going wild until the phone starts to lag. eventually stuff will crash and the lock screen may go with it. use this to your advantage and enable USB debugging as quickly as possible because it will reset itself after about 30 seconds. Someone else on YouTube has recently told me that it worked for them. I would look into doing that.

PhoneScrambler said:
I accidentally stumbled upon a something weird. I've managed to make the camera crash to the home screen somehow. I believe this was a result of holding both volume buttons and opening numerous menus while using the camera. My guess is that it overloads it after a certain amount of times and causes it to crash. I've gotten the android UI to crash like this before. I will try to recreate the scenario and update you guys on this. it's on a Kyocera Hydro Wave. Running android 5.0 I believe. Try going wild until the phone starts to lag. eventually stuff will crash and the lock screen may go with it. use this to your advantage and enable USB debugging as quickly as possible because it will reset itself after about 30 seconds. Someone else on YouTube has recently told me that it worked for them. I would look into doing that.
Click to expand...
Click to collapse
Is there anything a little more realistic possible? Lol, I can see an update available, can't connect to WiFi to update haha. The stuff they lock these phones with anymore i swear

I'm new to this forum, but NOT new to this site . I have visited here on numerous occasions seeking the help that needed . With that being said, I would like to offer a Bonafide, Tried and True way to factory reset the Kyocera Hydrowave . I KNOW that this work's for I have done in on numerous occasions for a friend of mine that works for Metro PCS ....
Step One: Completely power off the phone .
Step Two: Hold the Power AND Volume DOWN Buttons SIMULTANEOUSLY .
Step Three: DO NOT release any buttons, even when you get to the Boot Menu . (Very Important, If you don't do it right, you have to start all over lol ) .
Step Four: Once inside the Boot Menu, ONLY release the Power Button; or the Boot Menu will close and you have to start all over again .
Step Five: Use the Volume Down Button to Highlight the Wipe/Factory Reset Option .
Step Six: Use the Power Button to Select the option .
Step Seven: Watch the bottom of the screen for the progress, and then use the Volume Up Button to restart .
And there you have it . I hope that this helps out SOMEONE out there, because I feel good giving back for the help that I have received on here .
PS.( If you would like for me to post a Video Tutorial on this, can someone please tell me how to post the Video; I guess by me being a Newbie on here, I'm not allowed to do as of yet ) . If Anyone needs to contact me, as I'm not on here very often, my email is [email protected] .

LilAnt530 said:
Is there anything a little more realistic possible? Lol, I can see an update available, can't connect to WiFi to update haha. The stuff they lock these phones with anymore i swear
Click to expand...
Click to collapse
As unrealistic as it may sound it actually works Trust me on this. its similar to the LG attack which... is nothing but entering a long password.
betanews.com/2015/09/16/bypass-the-android-lollipop-lockscreen-by-entering-a-really-long-password
Just give it a go. it already worked for one dude on youtube. it takes a while but it honestly works. If you can get it, update the phone as soon as possible turn the screen timeout off and let it update. when the phone resets the update will install and you will be able to factory reset.
I mean it couldn't hurt. if you're locked out with no factory reset and ADB tools won't work what else can you do?

Cant seem to bypass FRP on Samsung Galaxy S7 Edge no matter what I try

I purchased a Samsung Galaxy S7 Edge from a guy off ebay with smashed the screen for a cheap price and recently took it to my local Official Samsung repair shop who repaired it for a reasonable price. I turned the phone on and it had all of the other guys personal stuff on the phone and he had a screen lock on there that I didn't know how to unlock so I did a factory reset in recovery without realising about FRP. When the phone rebooted I get the google screen asking me for the original google account credentials. I have tried contacting him and getting no joy. I have tried all of the methods in youtube but as the phone has the December 2016 security update none of them seem to work. When I plug the phone into my PC windows just says the USB device has malfunctioned and does not connect. I have installed the full Samsung USB drivers but the PC still doesn't recognise it. Could the fact it is not recognised be due to the google frp or could it be to do with the fact the phone could still be damaged from when it was dropped. Im not fussed about the USB port in normal use but it appears the only method to bypass the FRP is via the USB and using one of those methods. Can anyone help please?

I had the same problem and from my understanding all the methods are blocked now I'm trying to find out if theres a way that i just havent figured out yet i've book marked your question and will keep checking back to see if you have had any help

I know it is a tricky subject as I could be in possession of a stolen phone in which case I am rightly being locked out of it but I have the receipt to prove I have purchased it which I am willing to show to anybody who might know a way around it.

Have you tried putting it in download mode then using emergency recovery on Smart Switch?

Yes tried that earlier. Smart Switch doesn't recognise it. Just stays on the screen telling me to connect the phone even though I already have. When I plug the phone into the laptop it says the USB device (my phone) has malfunctioned and Windows doesn't recognise it. I have tried ODIN and that doesn't recognise the phone either as it isn't being given a COM number by Windows. Guess I will have to take it back to the Samsung Support Centre as I paid them to get the phone working and he said the price quoted was to get it fully working. If the USB isn't working then they can repair it!

Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out

Ditto as him
Proof of ownership, otherwise identical to dec update. whatever you think, need the help..thanks
ash 202 said:
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Click to expand...
Click to collapse

I've just unlocked a S5 Neo.
I flashed the very first firmware version (5.1.1)
FRP lock still there BUT I could now use the side sync hack or samsung unlock APK on OTG cable.
Then flashed the latest 6.0.1 version

Did you manage to unlock it?
I have the same problem

Any good current methods for this

uninstall all drivers related and kies. Then install kies and needed drivers. See if you can connect via download mode now.

godders3906 said:
I purchased a Samsung Galaxy S7 Edge from a guy off ebay with smashed the screen for a cheap price and recently took it to my local Official Samsung repair shop who repaired it for a reasonable price. I turned the phone on and it had all of the other guys personal stuff on the phone and he had a screen lock on there that I didn't know how to unlock so I did a factory reset in recovery without realising about FRP. When the phone rebooted I get the google screen asking me for the original google account credentials. I have tried contacting him and getting no joy. I have tried all of the methods in youtube but as the phone has the December 2016 security update none of them seem to work. When I plug the phone into my PC windows just says the USB device has malfunctioned and does not connect. I have installed the full Samsung USB drivers but the PC still doesn't recognise it. Could the fact it is not recognised be due to the google frp or could it be to do with the fact the phone could still be damaged from when it was dropped. Im not fussed about the USB port in normal use but it appears the only method to bypass the FRP is via the USB and using one of those methods. Can anyone help please?
Click to expand...
Click to collapse
Try this OP.

I Found A Way To Remove FRP that dosen't trip any trips
thundastruck said:
Try this OP.
Click to expand...
Click to collapse
Have a look at my post here... How To Reset FRP (Nearly All Fones From Android 6.x.x to 7.x.x, No Trips, Flash counter inciment, Knox, Still Mode = Official, Warenty 0 (0x0000) (Still working 16 June 2017)
You see, im not all that good with programming APK files, Dalvik VM, Obex,ect, but Linux I'm your man so i figured where is the email/pass info held and is there a switch to keep it on off, ends up one of the easiest hacks i've ever done, no complicates hashed/salted double coded switch, or hard wired switch,
just a very small partition that when or if you have any google account info stored in it you get locked out till you enter the exact same info, so i just dd,d the partition after taking a backup of course lol (; then when the fone booted to download mode i noted FRP=OFF so i flashed the stock bootloader to let the fone boot all the way to video mode and YES!!! it thought it was a new fone never been used before then i check the switches/trips KNOX , device status = official, to test i just made a new google account on the spot on the phone filled all the [email protected] in then voila its working, calls, all menu items ok, official all knox fine, just the way it was when i first got it, except obviously I've upgraded to v7, hopefully this works for you, please dont use or talk about illegall activity with this, or using it for profit, it's agift I gave you's for free so i want it to stay that way, all i want is a thanks, and a beer, lol, no but seriously, when the guy that invented the hammer to ease the effort of pussing nails into wood with you hands, never got hassle about murders with them, tha fact the could be used to rob banks, rob people, damage things, smash up shops, etc so... think about it, all i done was make a tool to help people too. theres litteraly millions of exploits, including android based ones out there just now check, https://www.exploit-db.com/ , OWASP_Vulnerable_Web_Applications_Directory_Project , http://www.exploit-db.com/ , http://www.blackploit.com/ , packetstorm cve etc etc. #
This is a tool to help people how when they first got there fone, and just filled in any old stuff to get into the fun part of the fone. ie "you cannot use [email protected],com as it already in use how about [email protected],com then the password, use one lower case, one higher case, one number , one symbol, more than 12 letters but less than 20, don't use anything you talk about, your name dob etc etc etc , so most people just pick the random one google pumps out and tries random passwords till one goes through, "I've seen this done a few times with my own eyes and had to stop them and explain and this was b4 FRP" Also if you change one letter in your google password, Factory reset your fone, your locked out if the fone never got the change in time, try it, Anyways if people use this for illegal purposes its there evilness there using not mine, there just using my tool as well as the thousand of others in the arsonry, even the OS check out "kali linux OS", "Parrot OS" "Blackbuntu OS"," BlackArch Linux" Also say you code a program to check hashes at a faster rate to speed up logins etc, a hacker will use it to check stolen passwd lists faster, if a faster CPU is made, the first thing a hacker thinks of is how many words/letters it can do a second so they can bruteforce the wifi key of the local bank, hospital etc.... so?

tried EVERYTHING ....
I have the USCellular G935R4 .... S#iiiit , like I've even gotten to the actual HOMESCREEN , but no matter what I do it wont do it.. i can access just about any app and the settings accurately every single time within seconds-mins, even tried flashing it, even had FULL access and control over it using sidesync, and i tried rooting it from oneclickroot on pc but thennnn knox trips and won't let me enable developer options.... And got the error with "sign in using email and password" on quick shortcut maker , PLUS tried everything to fix the error by reinstalling google account manager , etc ...
But NOTHING ...
If ANYONE has any idea how to successfully do get into it , Pplleasee let me know!
???
Seriously ,
I swear , I'll even pay someone ...

Try flashing the phone to the latest MM via odin and try bypassing. I tried it on my G** da** S6 with may 2017 patch. Dowgraded into latest MM and tried different bypass and it worked.

any help in 2020
ash 202 said:
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Click to expand...
Click to collapse
cany help in 2020 S7 Att frp removal PLEASE