Hello to all,
if you have rooted Honor 8 and problem with missing NFC panel settings, clean cache data in app settings. Also with Bluetooth. In some Root uninstallers Bluetooth system app is invisible. Use Total Commander.
Martin
Hey Martin,
I'm having this problem with my phone, but I don't understand exactly which app should be wiped
Related
I recently upgraded to Noughat on Sony xperia XZ and decided to sideload the google dialer (version 2.05.07 is the only version that works with non nexus/pixel phones)
However, i discovered that since installation, the speaker phone doesnt work properly. whenever i am using the phone on speaker, it reverts to normal and cuts out the speaker. if i press the speaker again, it will work for about a min of 2 and then revert. So i uninstalled but the issue persisted
To test, i have an old nexus 5 with MM and installed the app and had the issue. Uninstalling also didnt fix
Any thoughts on a fix other than factory reset?
P.S i never had the issue on both phones before i installed google dialer
Clear the cache and app data of the app maybe?
kaistledine said:
Clear the cache and app data of the app maybe?
Click to expand...
Click to collapse
thanks but tried all that. No idea what else it could be
Hi all,
Facing a strange issue when using Uber app in Honor 6X. I am able to select destination, then select the cab type. But after that, the screen only shows the map with nothing. It should ask to confirm the pickup location with a pin, and there should be a button to confirm the booking.
The problem might not be with the app itself. Because I have used the same version of Uber app on following phones, and they work great there.
OnePlus 5
Xiaomi Redmi Note 4
LeEco 2
I have found the app have problem on Honor 6X only. I have tested on two 6X handsets. Same problem.
This is what I have done till now, without any success
Cleared app cache and data.
Uninstalled the app, and again installed it.
Updated Android System WebView.
Need help. Thanks in advance.
Well just don't use Uber, the app seems to have an issue with the 6X
Does installing any other ROM helps in this kind of situations?
For some time now I own a Honor View 10. Back when I got it I paired my Sony Smartwatch 3 with the phone. I experienced that the watch sometimes loses connection to the phone and I had to restart the watch. That was not necessary with my old OnePlus 3. I thought it was the watch going bad because it had some other problems, too.
However, I recently got a Huawei Watch 2 and paired it to my Honor View 10. With the new watch, the problem still exists. Sometimes it loses connection to the phone without showing it. Sleep tracking with Sleep as Android does not get recorded or the watch app does not get the information my alarm is dismissed, notifications are still shown on the watch despite being already swiped away on the phone, new notifications do not get shown on the watch. It can only be resolved by turning off bluetooth on my Honor View 10 and turning it back on then. Sometimes I even need to reboot my watch.
Has anyone else experienced same problems on his or her Honor View 10 or has a smartwatch paired without any problems? For me it seems like the Bluetooth stack went bad on my Honor View 10.
I have exactly the same issue. My phone was fine on stock b130 but went wrong on subsequent updates. I believe the issue is a shared WiFi and Bluetooth stack. I installed Carbon ROM which works and doesn't suffer from this issue - the only problem i have is that I can't play my music collection from the external SD card with the stock music player or my normal one - have to use Poweramp or Rocket etc or copy files to the internal for system.
Sent from my AOSP on dragon using Tapatalk
I have similar issue.
My main concern is that my sleep tracker on the Smartwatch doesn't work when the phone goes to sleep.
So the sleep tracking is useless.
Did anyone else have this problem and now importantly a solution?
Sent from my BKL-L09 using Tapatalk
I have a FitBit... before i git used to doing it, I had the same issues with it.
wjhat i found was the battery manager was killing off the connection, set it to manual management and no issues since
I got problems pairing my Honor Band3 with my Honor V10 (AICP13.1) After 2 hours of trying i could suddenly pair my device with the tracker. For me i didnt succed to pair this device also with a Huawei AH100 (body fat scale)... Anybody an idea? I have de(installed) the Huawei Health app, deleted Bluetooth cache and data, no success. With an Axon 7 (also running AICP13.1) and a Huawei P10 (AICP13.1 also) i got connection within seconds... No problems to connect the View 10 to an Anker soundbox or an Samsung bluetooth keyboard....
borisku said:
I got problems pairing my Honor Band3 with my Honor V10 (AICP13.1) After 2 hours of trying i could suddenly pair my device with the tracker. For me i didnt succed to pair this device also with a Huawei AH100 (body fat scale)... Anybody an idea? I have de(installed) the Huawei Health app, deleted Bluetooth cache and data, no success. With an Axon 7 (also running AICP13.1) and a Huawei P10 (AICP13.1 also) i got connection within seconds... No problems to connect the View 10 to an Anker soundbox or an Samsung bluetooth keyboard....
Click to expand...
Click to collapse
I think it's issue with custom ROM rather than the watch.
May be you can capture logs and send it to the developer.
I would think that, too, but the joke is, that its exactly the same Rom on the Huawei P10 as on the Honor v10: I flashed the same romfile (for the beverley aka V10) onto the Huawei p10 (where the Huawei Body AH100 is definetly recognized by the health-app and runnig correctly) without any error (exept the ota app that leads to an error like this: "the ota app has stopped running") so i tried in the developer options ("networking") with setting different bluetooth AVRCP- Versions (1.3 -1.6) ...
borisku said:
I would think that, too, but the joke is, that its exactly the same Rom on the Huawei P10 as on the Honor v10: I flashed the same romfile (for the beverley aka V10) onto the Huawei p10 (where the Huawei Body AH100 is definetly recognized by the health-app and runnig correctly) without any error (exept the ota app that leads to an error like this: "the ota app has stopped running") so i tried in the developer options ("networking") with setting different bluetooth AVRCP- Versions (1.3 -1.6) ...
Click to expand...
Click to collapse
ROM is same but hardware is different hence there is a possibility of software compatibility issues.
But it would be very strange, that the hardware for that the ROM ist made (HonorV10) does not work, while the not really fitting hardware (Huawei p10) will work. Dont you agree?
borisku said:
But it would be very strange, that the hardware for that the ROM ist made (HonorV10) does not work, while the not really fitting hardware (Huawei p10) will work. Dont you agree?
Click to expand...
Click to collapse
P10 is Kirin 960 where as hv10 is Kirin 970 and Bluetooth versions are different hv10 has different and updated Bluetooth version than p10 hence it doesn't look strange to me.
Hi everyone.
My xiaomi mi note 10 recently updated to Android 10.
I'm getting so weird problem.
When I open certain apps (it happens with my weather app, Google maps, my bank app) the data and signal crashes, it comes out the Sim activation notification and after 1 sec I gain back my data.
Why this behaviour?
How can I solve?
Hope you have a solution, I'm not good in flashing manually or whatever.
Thanks
Milo
miloita said:
Hi everyone.
My xiaomi mi note 10 recently updated to Android 10.
I'm getting so weird problem.
When I open certain apps (it happens with my weather app, Google maps, my bank app) the data and signal crashes, it comes out the Sim activation notification and after 1 sec I gain back my data.
Why this behaviour?
How can I solve?
Hope you have a solution, I'm not good in flashing manually or whatever.
Thanks
Milo
Click to expand...
Click to collapse
You could try a reset. Sometimes after an update it's worth doing a system reset.
Sent from my Mi Note 10 using Tapatalk
Solved.
It was *find my phone* bugging everything. Deactivating it, no more issues. Probably it was giving issues with apps asking for GPS service..
Hello guys,
Everything in the app Tasker.
sadly the wifi tethering is not working via tasker, it worked perfectly on OP5 with Android 10 but now I am stucked. Nothing happens when a toggle is requested. System Access has been granted.
Do someone know a workaround? Because the toogle "off" for wifi tethering is working, only the toogle "on" is not working.
Does anyone know a tasker skript, where i dont have to turn on the display?
I'm using this workaround, where i have to put my phone out so the display can be activated:
https://taskernet.com/shares/?user=AS35m8mEjwWfj16++V8aK5e2GTww7mgmr/3ZUGrkY7va4k2agMo/2h8cSFC8OVOD1w98AZrchWJN5HvLpVIs&id=Task:Hotspot+Per+Drücken+An
Edit 02.03.2021:
Hello Guys, some new information.
I installed android 11 today on my oneplus nord (rooted), and now i can trigger Wifi-Tethering on with Tasker again.
Finally!
Also the App HOTSPOT AUTOMATIC (perfectly working on my OP7 PRO) doesn't turn ON hotspot, but it works only for turn OFF it.
Any ideas??
Maybe It will work in Android 11...so sad, that we don't find a workaround.
On the Nord the system is partly replaced with Google stock apps/settings, so maybe look at how this works on Pixel devices and try to mimic that?
swhnld said:
On the Nord the system is partly replaced with Google stock apps/settings, so maybe look at how this works on Pixel devices and try to mimic that?
Click to expand...
Click to collapse
Tried it, doesn't work. Tasker as an system/priv-app won't work either. Still searching for an workaround without unlocking the screen...
tryton79 said:
Also the App HOTSPOT AUTOMATIC (perfectly working on my OP7 PRO) doesn't turn ON hotspot, but it works only for turn OFF it.
Any ideas??
Click to expand...
Click to collapse
Read my edit from the first post
Knightrid3r said:
Read my edit from the first post
Click to expand...
Click to collapse
Yes, thanks. Also Automatic hotspot finally works correctly on the new release.
Problem solved!
Knightrid3r said:
Hello guys,
Everything in the app Tasker.
sadly the wifi tethering is not working via tasker, it worked perfectly on OP5 with Android 10 but now I am stucked. Nothing happens when a toggle is requested. System Access has been granted.
Do someone know a workaround? Because the toogle "off" for wifi tethering is working, only the toogle "on" is not working.
Does anyone know a tasker skript, where i dont have to turn on the display?
I'm using this workaround, where i have to put my phone out so the display can be activated:
https://taskernet.com/shares/?user=AS35m8mEjwWfj16++V8aK5e2GTww7mgmr/3ZUGrkY7va4k2agMo/2h8cSFC8OVOD1w98AZrchWJN5HvLpVIs&id=Task:Hotspot+Per+Drücken+An
Edit 02.03.2021:
Hello Guys, some new information.
I installed android 11 today on my oneplus nord (rooted), and now i can trigger Wifi-Tethering on with Tasker again.
Finally!
Click to expand...
Click to collapse
Can confirm, Wifi Tether works on Nord 10, with android 11 update. No root needed! I will never update this phone ever, never ever. lol